Ton Hummel
-
Upload
newcycling -
Category
Education
-
view
589 -
download
7
description
Transcript of Ton Hummel
1
Human Behaviour and Design of Cycle Facilities
Ton Hummel:
Principal Safety Engineer at Skanska, Bristol UK.
2
Design of Cycle Facilities
• Are cyclists (and drivers) going to behave the way we intended?
• Are we sure our designs are resulting in correct behaviour?
3
Behaviour of Cyclist
− Does general behaviour in UK differ from the Netherlands?
− Does behaviour differ for different types of cyclists?
4
Differences in Behaviour?
5
Important differences
− Speed
− Acceptance of interruptions and detours
− Acceptance of risk
6
What does this mean for our designs?
Example:
Fast commuting cyclist on shared path (footway/ cycle path).
7
What does this mean for our designs?
Fast commuting cyclist on shared path (footway/ cycle path).
8
Main requirements of all cycle facilities
1. Safe
2. Short
3. Direct
4. Continuous
5. Comfortable
9
Main requirements of all cycle facilities
Not meeting all 5 requirements is likely to result in unexpected behaviour.
10
Unexpected Behaviour?
11
Unexpected Behaviour?
12
Unexpected Behaviour?
13
Unexpected Behaviour?
14
Safe Cycle facilities
− Reducing lateral conflicts (cars overtaking cyclists)
− Reducing conflicts at junctions
− Reducing conflicts at start and end of cycle facilities
15
Reducing lateral conflicts
− Physical segregation (cycle paths)
16
Reducing lateral conflicts
− Physical segregation (cycle paths)
− Non-physical segregation (cycle lanes)
17
Cycle lanes
18
Reducing lateral conflicts
− Physical segregation (cycle paths)
− Non-physical segregation (cycle lanes)
− Other non-physical segregation (for instance use of bus lanes)
19
Reducing lateral conflicts
− Physical segregation (cycle paths)
− Non-physical segregation (cycle lanes)
− Other non-physical segregation (for instance use of bus lanes)
− Mixed traffic
20
Mixed traffic. Profiles to avoid.
Safe are:
A. Narrow profile; car can not overtake cyclist in own lane (or on own side of centre line)
B. Wide profile; car can safely overtake cyclist in own lane (or on own side of centre line)
Avoid:
Critical profiles (anything in between A and B)!
21
Mixed traffic. Non-critical profile.
22
Myths in design of cycle facilities
1. Doing something is better than doing nothing.
23
Myths in design of cycle facilities
1. Doing something is better than doing nothing.
Photo 1
24
Myths in design of cycle facilities
1. Doing something is better than doing nothing.
Photo 2 (same cyclist; a bit further down his route).
25
Myths in design of cycle facilities
2. Requiring cyclists to give way is safer than the other way around.
26
Myths in design of cycle facilities
3. Maintenance of cycle paths is not as “safety critical” as on routes for motorised traffic
27
Myths in design of cycle facilities
4. Hazardous crossings are safer to negotiate as pedestrian than as cyclist (cyclists dismount)
28
Myths in design of cycle facilities
5. Shared use footways are a good and cheap option
29
Myths in design of cycle facilities
6. Shared bus lanes are a good and cheap option
30
Myths in design of cycle facilities
7. Not providing access barriers at start and end of cycle paths will lead to misuse
31
Myths in design of cycle facilities
8. Allowing car parking within cycle lane is acceptable
32
Myths in design of cycle facilities
9. Providing cycle facilities is expensive
33
Myths in design of cycle facilities
10.A major shift in modal split is possible without introducing additional delays for cars
34
Thank you!
Divera Twisk
Ton Hummel
35
Reducing conflicts at Junctions
Important causation factors of accidents with cyclists at junctions:
− Drivers not seeing (or not noticing) cyclist
− Not enough space for cyclists
− Cyclist doing something unexpected
36
Reducing conflicts at Junctions
Potential solutions for those conflict types:
− Advanced stop lines (with proper lead-in to provide enough space for cyclists).
− Continuation of cycle lanes through junction area (preferably in coloured surface).
− Separate stage (or pre-start) for cyclists in signalisation
− Continuation of cycle facilities after junction area.
37
Cyclists on Roundabouts
Photo Fietsberaad
38
Cyclists on Roundabouts
Photo Fietsberaad
39
Cyclists on Roundabouts
Photo Fietsberaad