Tom Hanson Las Cruces, NM 88001 Ph 845 901-1270 Las …
Transcript of Tom Hanson Las Cruces, NM 88001 Ph 845 901-1270 Las …
�Pull ball ....................................................35.00
�Chamfer revolver cylinder ...................40.00
�Straight Flute rifle Bbl ........................195.00�Lap in bolt lugs
� Not including polish and blue ............75.00
�Safeties, installing
�Triggers, adjusting pull and travel .....35.00
�Welding on new bolt handle ................85.00
� Not including parts ...............................30.00 to 100.00
SHOTGUN WORK
� Non-plated bores, per barrel...............40.00
�Chamfer revolver barrel .......................40.00
� Does not include cost of barrel, action
� fitting new barrel ...................................55.00
HANDGUN WORK
�Forging bold handle ..............................65.00
�receiver ring ............................................45.00
�Install pre-threaded and chambered barrel
�Long forcing cone
�Make and install spring ......Hourly Rate
�Re-contour front or rear
� Plated bores, per barrel ........................50.00
�Re-Chamber Barrel…………………85.00
Thread muzzle end for device ..............85.00
� polish, or bluing ..................................150.00
�Triggers, installing
�� (Not including bluing)......................55.00
�Install barrel band swivel .....................40.00
Re-fit barrel to receiver ........................200.00 to 300.00
� Not including setting back barrel or
� Not including parts ...............................45.00 to 100.00
Re-solder rib (not including bluing) .100.00Raise dents in barrel................................65.00
Install Savage style barrel......................45.00
Re-solder forend lug
MUZZLE LOADER WORK
�Remove broken ramrod from Bbl ......35.00
� Not including parts) .............................75.00
Remove/modify hammer spur ..............30.00
HANDGUN WORK (continued)
Install crane lock......................................40.00
Re-barrel revolver (labor only).............70.00Straighten crane .......................................40.00
�Revolver action job (clean, smooth action
�Semi-auto action job (clean, smooth� action, not including parts) .................75.00
� 140 grit polish .....................................125.00
�
SERVICE CHARGES
CLEAN AND OIL CUSTOMER GUN
METAL FINISHING
�Hunter finish (pits and old finish removed.
� Bluing) ....................................................35.00
�Barreled action or barrel
�Wire wheel or matte finish.................125.00
�Per man & machine hour .....................60.00�Per man hour ...........................................50.00
�Minimum charge per gun .....................35.00
�Consists of completely stripping gun, �clean, check for wear, make suggestions �of services needed .................................50.00
Rust Blue
�Deluxe finish (same as above with a� 400 grit finish ......................................225.00
�(Customer polished) ..............................60.00
�Double barrel guns add ........................60.00
SIGHT WORK�Sight in customer gun (Does not include � cost of ammo, Targets, etc.). ..............60.00�Bore sighting...........................................20.00�Drill and tap barrel or receiver� Per hole ...................................................25.00
�Basket of parts (customer polished) ..60.00
�Cut dovetail in barrel ............................45.00�Install front sight ramp� Sweat-on type (may require re-
� Screw-on type (two hole)....................40.00
�Install insert in pistol sight...................40.00�Build up or construct extra high
� Plug hole and re drill and tap for
� Band type................................................50.00
Install front or mid rib bead on front sight .................................................40.00
shotgun.......................................................25.00
� bead..........................................................40.00�Install receiver sight� Drilled and taped...................................20.00
� Screw-on type (one hole) ....................25.00
�Cost of liner or bluing) .........................80.00
� Gun drilled and tapped ........................30.00
Check firing pin protrusion ...................10.00
�Remove fouling from barrel...time & material
�Cut and crown barrel
�Make chamber cast ................................30.00�Remove fired case from chamber.......25.00
�Remove obstruction from bore ...........25.00
� Rifles and shotgun ................................60.00� Handguns ................................................60.00�Chamber and fit barrel to action
� Not drilled and tapped (see per hole
GENERAL BARREL, ACTION & RIFLE WORK�Test fire customer gun
� Price above) .........................................100.00
� (Does not include cost of ammo) ......25.00
�Scope mounting
�Check head space...................................20.00
�Remove live round from chamber .....50.00
Lap barrel ..................................................50.00�Straighten/adjust barrel.........................50.00�Install liner in barrel (does not include
Tom Hanson Ph 845 901-1270
Las Cruces Gunsmith
Las Cruces, NM 88001
Tom Hanson Las Cruces Gunsmith
Las Cruces, NM 88001Ph 845 901-1270
�Tighten slide of 1911 auto ...................75.00�Lighten 1911 trigger..............................80.00
�Fit barrel to 1911 auto (not including Bbl)
� Ramped barrel .....................................100.00
�Bevel magazine well on 1911 auto ....30.00�Checker front of frame on 1911 ......125.00�Stipple front of frame on 1911 ............60.00�Open and modify ejection port on 1911
�Fit new trigger to 1911 (not including
�Fit and install Bbl bushing on 1911 ...40.00
� Auto slide................................................40.00�Throat, polish feed ramp of 1911 .......45.00
� Cost of trigger) ......................................50.00
� Non-ramped barrel ...............................60.00
�Fit custom hammer to 1911 (does not� Include cost of hammer) .....................70.00
� Unfilled oil or lacquer finish on
�Glass bedding barrel & action
� Pillar bed ..............................................120.00
�� Drill stock & install ..........................65.00
STOCK WORK
�Install recoil pad (labor only) ..............40.00
� (Does not include cost of parts
� Average stock ......................................125.00� On complicated stock ........................165.00
� Match rifles, M-1 Garand etc. ............80.00
�Install stock cross bolt ..........................40.00
�� Simple installation in butt stock.....35.00
�Wood finishing
� Average stock ......................................165.00
�Hunter finish
�Spray finish� Lacquer or polyurethane .....................85.00
�� Hydraulic style.................................100.00�Install auto pistol compensator .........100.00
�Install sling swivels (wood screw) .....30.00
� or refinishing) ........................................85.00
� On complicated stock ........................200.00
�Install sling swivel (double bbl) .........45.00
�Modify 1911 frame for beavertail safety
�Gunsmith finish� Filled oil or lacquer finish on
� Hunting rifle ...........................................75.00
�Install Recoil Reducer
�Inletting of semi-finished stock
�� Recoil pad, etc .................................250.00��
�� Does not include buttplate, grip cap,