TOC_WAF_RF_2012
-
Upload
miza-yusof -
Category
Documents
-
view
111 -
download
0
Transcript of TOC_WAF_RF_2012
TOC.CW.LA1.S01.1
TABLE OF CONSTRUCT
Construct : S01 Computer Security Measures
Aspect : LA1.S01.1 Apply Correct Security Procedures Using Antivirus
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
2
1. Choose antivirus software to be used.
Write the name of the antivirus software.
Completed ACF.CW.LA1.S01.1.
Use any antivirus software available e.g. Kaspersky, McAfee Virus Scan, Norton Antivirus, Trend Micro PC-Cillin, Dr Solomon, AVG, etc.
Scan area can be specific folder, floppy disk, or flash memory.
Candidate can print screen the scan summary.
If no virus is detected, criterion four is considered done. Write “No action taken”.
Values:
Confident
Responsible
2
2. Start the antivirus software and select area to be scanned.
State the area selected.
23. Scan the selected
area.
Copy scan summary.
2
4. Choose and apply any or all of the following when virus is detected – delete/remove, clean/heal, quarantine/move to vault.
State action taken
8 TOTAL MARK
TOC.CW.LA1.S01.2
TABLE OF CONSTRUCT
Construct : S01 Computer Security Measures
Aspect : LA1.S01.2 Apply Correct Security Procedures Using Anti-Spyware
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
2
1. Choose anti-spyware software to be used.
Write the name of the anti-spyware software.
Completed ACF.CW.LA1.S01.2
Suggested anti-spyware software: Lavasoft Ad-Aware SE Personal.
Print screen can be used to display scan summary.
If no spyware is detected, criterion four is considered done. Write “No action taken”.
Values: Confident
Responsible
2
2. Start the anti-spyware software and choose a scan mode.
State the scan mode selected.
23. Scan the selected
area.
Copy scan summary.
2
4. Choose and apply any of the following when spyware is detected - remove/quarantine the identified object(s).
State the action taken.
8 TOTAL MARK
TOC.CW.LA1.AS02.1
TABLE OF CONSTRUCT
Construct : S02 Impact of ICT on Society
Aspect : LA1.S02.1 Locate and present information on impact of ICT on society
Instrument : Verbal Presentation
MARK CRITERIA EVIDENCE NOTE
1
1. Locate information from more than one source. Write the number of sources referred.
Completed ACF.CW.LA1.S01.2
Suggested anti-spyware software: Lavasoft Ad-Aware SE Personal.
Print screen can be used to display scan summary.
If no spyware is detected, criterion four is considered done. Write “No action taken”.
Values: Confident
Responsible
2
2. Present the information in 5 to 10 slides.Write the number of slides used.
5
3. Presentation includes:a. Topicb. Contentc. Conclusiond. Sources of
reference
Submit a soft copy or hard copy of the presentation.
2
4. Display cooperation.a. Write the names
of group members.
b. Verbal verification from group members OR assessor’s observation.
10 TOTAL MARK
TOC.CW.LA2.S03.1
TABLE OF CONSTRUCT
Construct : S03 PC Assembling
Aspect : LA2.S03.1 Assemble the components of a PC
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
21. Fix the processor
correctly.Write processor specification.
Completed ACF.CW.LA2.S03.1
CAUTION: Assessor must make sure that the processor is properly fixed by the candidate to avoid permanent damage to it.
Installation of floppy drive OR optical drive is required if and only if they come with the PC.
Candidates must connect all necessary cables.
Values: Accurate Confident Responsible
22. Fix the RAM
correctly.Write RAM capacity.
2
3. Install the power supply unit correctly.Write power (W) and voltage (V) of unit.
24. Install the hard disk
correctly. Write hard disk capacity.
2
5. Install the floppy drive AND/OR optical drive correctly.Write drive(s) installed.
16. Boot up the computer
successfully.
2
7. Check BIOS setup.a. Hard disk
detectedb. Floppy drive
AND/OR optical drive detected
13 TOTAL MARK
TOC.CW.LA2.SO4.1
TABLE OF CONSTRUCT
Construct : S04 Software Installation
Aspect : LA2.S04.1 Install operating system, application software and utility program
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
3
1. Install an operating system.Write the name of the operating system installed.
Completed ACF.CW.LA1.S01.2
Suggested anti-spyware software: Lavasoft Ad-Aware SE Personal.
Print screen can be used to display scan summary.
If no spyware is detected, criterion four is considered done. Write “No action taken”.
Values: Confident
Responsible
3
2. Install application software.Write the name of the application software installed.
3
3. Install a utility program.Write the name of the utility program installed.
9 TOTAL MARK
TOC.CW.LA2.S05.1
TABLE OF CONSTRUCT
Construct : S05 Current and Future Development of Open Source Software and Latest Development in ICT
Aspect :LA2.S05.1
Explain the latest open source software available and the latest development in ICT
Instrument : Written Assignment
MARK CRITERIA EVIDENCE NOTE
41. Explain the latest open
source OSa. Meaningb. TWO examples
Written Assignment
Candidate works in groups of 2 to 4 to conduct study AND/OR for discussion.
Written assignment MUST be done individually.
Refer to WAF.CW.LA2.S05.1.
Suggested duration:2 to 4 weeks
Values: Appreciate Cooperate Confident
4
2. Explain the latest open source application software
a. Meaning b. TWO examples
4
3. Explain the latest development in ICT
a. ONE hardwareb. ONE software
44. Explain pervasive
computinga. Meaning b. TWO examples
2
5. Follow required written assignment format:a. content formatb. document format
2
6. Display cooperation.
a. Write the names of group members.
b. Verbal verification from group members or assessor’s observation.
20 TOTAL MARK
WAF.CW.LA2.S05.1
WRITTEN ASSIGNMENT FORMAT
LEARNING AREA: COMPUTER SYSTEM
Construct : S05 Current and Future Development of Open Source Software and Latest Development in ICT
Aspect :LA2.S05.1
Explain the latest open source software available and the latest development in ICT
Instrument : Written Assignment
Instruction:
Work in groups of two to four to find information and discuss on the latest open source software available and the latest development in ICT. Complete this written assignment individually.
You are given two to four weeks to complete this assignment.
Content Format
1.0 Introduction
(meaning of open source software, hardware, software, etc)
2.0 The Latest Open Source Operating System (OS)
2.1 Meaning of open source OS
2.2 Examples of open source OS
(explain two examples)
3.0 The Latest Open Source Application Software
3.1 Meaning of open source application software
3.2 Examples of open source application software
(explain two examples)
4.0 The Latest Development in ICT
4.1 Hardware
(state specification OR special features of ONE hardware and compare it to previous model(s))
4.2 Software
(state year/date of release, special features of ONE software and compare it to previous version(s))
5.0 Pervasive Computing
5.1 Meaning of pervasive computing
5.2 Examples of pervasive computing
(explain two examples)
6.0 Conclusion
Reference
(give at least two sources of reference)
Document Format cover page
o Candidate’s detailso Title: The latest Open Source Software Available and the Latest Development in ICT
page margin - top, bottom, left, and right: 1”, paper size - A4 line spacing - 1.5 lines typeface - Times New Roman, font size- - 12 pts (content), and14 pts for title/heading number of pages - 3 to 10
TOC.CW.LA3.S06.1
TABLE OF CONSTRUCT
Construct : S06 Network Facilities Setup
Aspect : LA3.S06.1 Crimp and Test UTP Cables
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
2
1. Crimp a Straight Cable Skin off the cable jacket. Untwist and straighten each
wire. Arrange the wires according to
the 568B wiring schematic order for both ends.
Cut and insert the wires into a RJ45 connector.
Crimp the cable using a crimping tool.
(assessment done on final product)
Crimped straight and
crossed cables.
At least 1 meter of UTP cable is recommended.
Candidate may refer to the wiring schematic manual in the Learning Module.
The cables must be labelled and kept in a safe place
Values: Precise Confident Abide
22. Check the straight cable is
crimped successfully using a cable tester.
2
3. Crimp a Crossed Cable Skin off the cable jacket. Untwist and straighten each
wire. Arrange the wires according to
the 568A wiring schematic order for one end AND 568B wiring schematic order for the other end.
Cut and insert the wires into a RJ45 connector.
Crimp the cable using crimping tool.
(assessment done on final product)
24 Check the crossed cable is
crimped successfully using a cable tester.
8 TOTAL MARK
TOC.CW.LA3.S06.2
TABLE OF CONSTRUCTConstruct : S06 Network Facilities Setup
Aspect : LA3.S06.2 Configure and Test Network Connection
Instrument : Demonstration
MARK CRITERIA EVIDENCE NOTE
21. Set an IP Address.
Write the IP address.
Completed ACF.CW.LA3.S06.2
IP Address and Subnet Mask given by the assessor.
Values: accurate confident responsible abide
22. Set a Subnet Mask.
Write the subnet mask.
1
3. Choose another computer to test the configuration.Write the IP address of the computer.
34. Ping the other
computer.Copy the ping result.
8 TOTAL MARK
TOC.CW.LA3.S07.1
TABLE OF CONSTRUCT
Construct : S07 Current and Future Development in Networks and Communications.
Aspect : LA3.S07.1 Describe the Latest Development in Networks and Communications
Instrument : Written Assignment
MARK CRITERIA EVIDENCE NOTE
8
1. Describe Mobile Computing
a. definition
b. specifications, services, frequencies
Written Assignment
Candidates work in groups of 2 to 4 to conduct the study and for discussion.
Written assignment must be done individually.Suggested duration:2 to 4 weeks
Refer to Written Assignment Format in WAF.CW.LA3.S07.1
Values: cooperate responsible
abide
4
2. Describe Internet Technology and Services a. VoIPb. BLOG
8
3. Describe types of network a. PAN, b. VPN, c. WLAN, d. WIMAX
2
4. Follow required written assignment format:a. content formatb. document format
2
5. Display cooperation.
a. Write the names of group members.
b. Verbal verification from group members or assessor’s observation
24 TOTAL MARK
WAF.CW.LA3.S07.1
WRITTEN ASSIGNMENT FORMAT
LEARNING AREA : COMPUTER NETWORKS AND COMMUNICATIONS
Construct : S07 Current and Future Development in Networks and Communications
Aspect : LA3.S07.1 Describe the Latest Development in Networks and Communications
Instrument : Written Assignment
Instruction:
Work in groups of two to four to find information and discuss on the latest development in Networks and Communications. Complete this written assignment individually.
You are given two to four weeks to complete this assignment.
Content format
1.0 Introduction
(Computer Networks and Communications)
2.0 Mobile Computing
2.1 Definition
2.2 Specification, services, and frequencies of Mobile Computing
(based on one product e.g. PDA, 3G mobile phone)
3.0 Internet Technology and Services
3.1 VoIP
3.2 BLOG
4.0 Types of network.
4.1 PAN
4.2 VPN
4.3 WLAN
4.4 WIMAX
5.0 Conclusion
(Computer Networks and Communications)
Reference
(give at least two sources of reference)
Document Format (use Word Processor)
cover page
o Candidate’s details
o Title: The Latest Development in Networks and Communications
page margin - top, bottom, left, and right: 1”, paper size - A4
line spacing: 1.5 lines
typeface - Times New Roman, font size - 12 pts (content), 14 pts for title/heading
number of pages - 3 to 10
TOC.CW.LA4.S08.1TABLE OF CONSTRUCT
Construct : S08 Multimedia Development
Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An
Interactive Educational Multimedia Project.
Instrument : Project
MARK CRITERIA EVIDENCE NOTE
3
1. Analysis PhaseWrite the project title, objective and target audience.
Completed RF.CW.LA4.S08.1
and a soft copy of the product.
The multimedia product must be interactive, educational and include all five multimedia elements.
Choose any topic from any subjects taught in school: ICT Bahasa Malaysia Bahasa Inggeris Mathematics Science, etc
Authoring Tools: Tool book Presentation s/w Web editor
Values: Creative Integrity
Responsible
22. Design Phase
Sketch storyboard.
1
3. Implementation PhaseDevelop a multimedia project based on the storyboard using an authoring tool.Write the name of the authoring tool used.
2
4. Testing PhaseTest the developed multimedia product.Complete the checklist.
7
5. Evaluation PhaseAsk assessor to evaluate the developed multimedia product.a. Content
match the project objective(s)
b. Interface user friendly interactive
c. Navigation all links/buttons
functioning correctly
d. Multimedia Elements text graphic audio video
c. animation
1
6. Publishing Phase Submit a softcopy of the multimedia product.Write the storage medium used and name of the main file or folder.
16 TOTAL MARK
RF.CW.LA4.S08.1REPORT FORM
LEARNING AREA : MULTIMEDIA
Name of Candidate
IC No
Index No
Construct : S08 Multimedia Development
Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project.
Instrument : Project
1. ANALYSIS PHASE
Project Title
Objective(s)
Target Audience
2. DESIGN PHASE (attach storyboard if space provided not enough)
3. IMPLEMENTATION PHASE
Authoring tool
4. TESTING PHASE
CHECKLIST FORM
Items YES NO
A Content
Match the project goal
B Interface
User-friendly
Interactive
C
Navigation
All links/buttons functioning correctly
5. EVALUATION PHASE
(to be carried out by the assessor using ACF.CW.LA4.S08.1)
6. PUBLISHING PHASE
Storage Medium
Main File/Folder Name
Candidate’s Signature
------------------------------
TOC.CW.LA4.S09.1
TABLE OF CONSTRUCT
Construct : S09 Current and Future Development of Multimedia
Aspect : LA4.S09.1 Gather Examples of Immersive Multimedia In Education, Business or
Entertainment
Instrument : Scrapbook
MARK CRITERIA EVIDENCE NOTE
21. Front cover includes
a. topic
b. name of candidate
Completed RF.CW.LA4.S09.1
AND
Scrapbook
Candidate compiles articles, pictures, drawings from different types of sources such as newspapers, magazines, Internet, etc into a scrapbook based on any of the following:
Immersive Multimedia in Education
Immersive Multimedia in Business
Immersive Multimedia in Entertainment
Scrapbook must be done individually.
Values:
creative
responsible
appreciate
22. Scrapbook contains at
least SIX pages excluding front and back covers.
23. Collections are relevant
to the topic chosen.
24. State source and/or
date in the scrapbook.
25. Submit
RF.CW.LA4.S09.1
10 TOTAL MARK
RF.CW.LA4.S09.1
REPORT FORM
LEARNING AREA : MULTIMEDIA
Name of Candidate IC No
Index No
Construct : S11 Current And Future Development Of Multimedia
Aspect :LA5.S11.1
Gather Examples of Immersive Multimedia In Education, Business Or Entertainment
Instrument : Scrapbook
Activity Log (record all activities carried out in compiling the scrapbook)
Date Activity Remarks
Candidate’s Signature
------------------------------
TOC.CW.LA5.S10.1
TABLE OF CONSTRUCT
Construct : S10 Program Development
Aspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving Program
Instrument : Practical Session
MARK CRITERIA EVIDENCE NOTE
4
1. Problem Analysis a. Write the problem
statement.b. List all the required
input itemsc. Write the expected
output.d. Write the formula to be
used.
Completed RF.CW.LA5.S10.1
ANDSubmitted program.
Duration of practical session: 2 periods
Choose any of the suggested projects (refer to APPENDIX B) or propose a new project.
Submit executable file
and/or project file and
form(s).
During evaluation, assessor runs the candidate’s program to validate the output in 4(b) using the data in 4(a).
Values:1. Accurate2. Confident3. Responsible4. Abide
6
2. Program Designa. Write the pseudocode.
ORDraw the flowchart.
b. Sketch the user interface design for input.
c. Sketch the user interface design for output.
2
3. CodingDevelop a program based on (1) and (2).Write the name of the project file.
6
4. Testing and Debugginga. State the test data used
for each input item listed in 1(b).
b. Write the output based on 4(a)
c. Compile the program. Write down the name of the executable file.
2 5. DocumentationSubmit report and soft
20 TOTAL MARK
RF.CW.LA5.S10.1REPORT FORM
LEARNING AREA : PROGRAMMING
Name of Candidate
IC No
Index No
Construct : S10 Program Development
Aspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving Program
Instrument : Practical Session
Assessment : 1 / 2 / 3 / _
1. Problem Analysis
a. Problem Statement
b. Required Input
c. Expected Output
d. Formula Used
2. Program Design
a. Pseudocode OR Flowchart
b. User Interface
Design for Input
c. User Interface Design for Output
3. Coding
(refer to program submitted)
Project File Name: __________________
4. Testing and Debugging
a. State the data used for each input item listed in 1(b).
Input item (s) Input data
b. Write the output based on the input data in 4(a)
Output item(s) Actual Output
c. Name of the executable file
TOC.CW.LA5.S11.1
TABLE OF CONSTRUCT
Construct : S11 Current And Future Development Of The Latest Programming Languages
Aspect : LA5.S11.1 Find Out The Latest Programming Languages
Instrument : Report
MARK CRITERIA EVIDENCE NOTE
21. Identify and name the two
latest programming languages
Completed RF.CW.LA5.S11.1
Report must be done individually.Suggested duration:
2 weeksValues:
Cooperate
Appreciate
12
2. Identify and state
a. the developer
b. when it was developed
c. purpose (why it was introduced)/application
d. platform
e. approach (structured/object-oriented/etc)
f. translator used
2 3. State the source of reference.
16 TOTAL MARK
RF.CW.LA5.S11.1
REPORT FORM
LEARNING AREA : PROGRAMMING
Name of Candidate IC No
Index No
Construct : S11 Current And Future Development Of The Latest Programming Languages
Aspect : LA5.S11.1 Find Out The Latest Programming Languages
Instrument : Report
Name of Latest Programming Language
1. 2.
Developer
Year Developed
Purpose
Platform
(OS)
Approach
Translator used
Special features (optional)
Source of Reference
Candidate’s Signature
------------------------------
TOC.CW.LA6.S12 1
TABLE OF CONSTRUCT
Construct : S12 Database Development
Aspect : LA6.S12.1 Develop A Database Project
Instrument : Practical Session
MARK CRITERIA EVIDENCE NOTE
21. State the project
title and the objective(s) of the project.
Completed RF.CW.LA6.S12.1
ANDsoft copy of the
database project
Duration of practical session: 2 periods
Choose any of the suggested projects in APPENDIX C or propose a new project.
Draw a line to show the relationship between both tables.
Example:TABLE 1 TABLE 2
Field name
…….
1:M
or
M:N
or
1:1
Field name
…….
Values: accurate confident
responsible
8
2. Create all the required tables. a. Name each table.b. State the field
names for each table.
c. State the primary key(s).
d. Relate the tables.Draw a line to show the relationship.
23. Create a form for
each table.
2 4. Enter data into the tables.
2 5. Create a query from two tables.
26. Create a report
based on the query created.
27. Submit the report
form and a soft copy of the developed database project.
20 TOTAL MARK
RF.CW.LA6.S12.1
REPORT FORM
LEARNING AREA : INFORMATION SYSTEM
Name of Candidate
IC No
Index No
Construct : S12 Database Development
Aspect : LA6.S12.1 Develop A Database Project
Instrument : Practical Session
Assessment : 1 / 2 / 3 / _
1. Project title
Objective(s)
2. Table 1 Table 2
Table name
Field names
Primary key
The relationship between both tables.
3. Name of forms
4. Number of records entered
Table ________________ Table ___________________
5. Criteria used for query
Field Name:Criteria:
6. Name of report
7. Name of file
Candidate’s Signature
------------------------------
TOC.CW.LA6.S13.1TABLE OF CONSTRUCT
Construct : S13 Current And Future Developments In Information Systems
Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems.
Instrument : Report
MARK CRITERIA EVIDENCE NOTE
21. Define web-based
application.
Completed RF.CW.LA6.S13.1
Report must be done individually.
Suggested duration: 2 weeks
Values: cooperate responsible
22. Give an example of web-
based application.State the function of the application.
13. Name a programming
language used to develop web-based application.
14. Name a DBMS used in
web-based application.
2/05. State an advantage of
web-based application compared to non web-based application.
16. State a vulnerability of
web-based application.
1 7. State source of reference.
10 TOTAL MARK
RF.CW.LA6.S13.1
REPORT FORM
LEARNING AREA : INFORMATION SYSTEM
Name of Candidate
IC No
Index No
Construct : S13 Current And Future Developments In Information Systems
Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems.
Instrument : Report
Definition of web-based application
An example of web-based application
Function of the application
An example of a programming language used to develop web-based application.
An example of a DBMS used in the web-based application.
An advantage of web-based application (compared to non web-based application)
A vulnerability of web-based application
Source of Reference
Candidate’s Signature
------------------------------