TM Emergency Shutdown System 0-:-49...
2
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com HILO-MATIC TM EMERGENCY SHUTDOWN SYSTEM The HiLo-Matic TM Emergency Shutdown System (ESD) is a self contained, reliable valve shutdown system that does not require external power. Plainsman is capable of providing a complete turn-key system assembled, tested and on site ready for operation. There are 4 main components of the system, all available from Plainsman: 1. The hydraulic controller 2. The pressure pilot 3. The spring return valve actuator (fail open or fail closed) 4. The valve (ball/gate/globe/plug) Available for a variety of line sizes and pressures. The ESD can be tailored to each specific application, providing the most economical solution. Custom solutions and components are also available outside of the typical installations outlined below. HiLo-Matic TM Emergency Shutdown System Typical line sizes: • Available between 1” and 24” and ANSI 150-2500 Typical line pressures (pressure pilot set-point range): • Available between 30 and 2300 psi Instrumentation Medium: • Hydraulic oil: UNIVIS HVI 13
Transcript of TM Emergency Shutdown System 0-:-49...
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com
HILO
-MAT
ICTM
EM
ERGE
NCY
SHUT
DOW
N SY
STEM
The HiLo-MaticTM Emergency Shutdown System (ESD) is a self contained, reliable valve shutdown system that does not require external power. Plainsman is capable of providing a complete turn-key system assembled, tested and on site ready for operation.
There are 4 main components of the system, all available from Plainsman:
1. The hydraulic controller 2. The pressure pilot3. The spring return valve actuator (fail open or fail closed)4. The valve (ball/gate/globe/plug)
Available for a variety of line sizes and pressures. The ESD can be tailored to each specific application, providing the most economical solution. Custom solutions and components are also available outside of the typical installations outlined below.
HiLo-MaticTM Emergency Shutdown System
Typical line sizes:
• Available between 1” and 24” and ANSI 150-2500
Typical line pressures (pressure pilot set-point range):
• Available between 30 and 2300 psi
Instrumentation Medium:
• Hydraulic oil: UNIVIS HVI 13
Specifications subject to change without notice
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com(2),PB-SSYS04
HILO-MATIC
TM EMERGENCY SHUTDOW
N SYSTEM
Accessories• Electric pressure switch• Solenoid valve• Valve position indicator• SCADA instrumentation• Flow meter• Level switch(es)• Pressure isolation valve• Vibration sensor• Sand probe• Almost any other analog electrical form of monitoring
System Features• Minimum deadband• Reliable• Bubble tight design• Block and bleed design• Safety vent• Severe duty• Raised breather• Wide range of applications• Easy installation operation• Factory set, yet field adjustable pilot• Corrosion resistant• Readily available spares/support• Compatible with most existing ESD systems
Ordering Information* Please specify the following1. Line size and fluid type2. Flange type/rating3. Pressure pilot set points4. Temperature range5. System preferences/required accessories6. Dimensional constraints7. The open/close time requirement, if applicable8. Any existing equipment
