Timing Belt Clamp Plates · 2020. 10. 5. · TBC (Only) TBCL (Set) 2 4 13 13 1 5 9 9 0.5 2.5 M2...
Transcript of Timing Belt Clamp Plates · 2020. 10. 5. · TBC (Only) TBCL (Set) 2 4 13 13 1 5 9 9 0.5 2.5 M2...
-14791 -14801
Timing Belt Clamp PlatesPress Formed Multi Fitting
QFeatures: Can be attached to belts, guides, etc. in a flexible manner. Are press-formed and thus, are priced up to 50% lower than conventional products. Furthermore, are space-saving and are suitable for use with many quantity of desktop devices. Can be adopted also for the 3D printer mechanism.
Specifications Type M Material a AccessoryFitting Plate TBC
SUS304 Equivalent Hex Socket Head Cap Screw x 4 pcs.(Stainless Steel)Fitting Plate + L-shaped Plate TBCL
EOn the fitting plate, since the slit part is punched, this part generates dullness to some extent but does not encounter any problem when being clamped to belts.EWhen this plate is clamped to a belt, the belt is deformed. Therefore, once the said clamping operation is completed, the belt cannot be re-mounted for new usage any further.* Matching is added to 4 places on the fitting plate and is added to 3 places on the L-shaped plate.
S
1.5
B
C
C
W P
P1
A
4-N4-Matching*
4-R2
Q Fitting Plate Only (Through Hole) TBC
Belt
Table
Has a groove provided to prevent overpressure and thus, is excellent in assembly performance.
Mounting Example
S P1
4-M C
B
4-R2
WA P
H
PG
B
P1
P2
8.5
21.5
8.513
4-N1
2-M4-Matching*
3-Matching*
Q Fitting Plate (Tapped Hole) and L-shaped Plate in Set TBCL
A groove for overpressure prevention is provided in the same manner as above.
Belt
Mounting Example
Open End Belt: HTBO-S3M060 (wP.1465)
TBC 3-6TBC 2-6
Timing Belt: HTBN###S2M-060 (wP.1465)
Linear Bushing: LHFSD (wP.311)
TBCL2-4 or TBCL3-6
Timing Belt
The following application example indicates that two fitting plates are used for open end belts. In this example, clearance is provided between two plates to retain belt relief.
The following application example indicates that an L-shaped plate set and linear bushing are combined for use. TBCL2-4 / TBCL3-6 has the same vertical / horizontal thread pitch as the fitting plate has and thus, can be mounted as shown on the figure below as well on the figure on the left.
Linear Guide
Table
TBCL2-6
Timing Belt: PTBN###P2M-060(wP.1467)
The following example indicates that an L-shaped plate set is combined with a linear guide. The clamp plate is small-sized and thus, allows space-saving designing on the whole.
The clamp plate can be used also in combination with a close end belt.
*1: This plate is spec-designed to clamp a belt with 6 teeth when the belt pitch is 2mm and to clamp a belt with 5 teeth when the belt pitch is 3mm.*2: When the mating belt is 3GT Type, the plate is allowed to clamp the belt but cannot fulfil the overpressure protection function, because this type of belt is thicker than other types. Avoid excessive clamping of belt.
Part NumberBelt
Nominal Width
Fitting Plate *1 L-shaped PlateIncluded
Screw Applicable BeltTYPEBelt
Pitch(mm)
A B C W P P1 S N (Only)
M (Set) H P2 N1 G M
TBC(Only)
TBCL(Set)
2
4 13
13 1
5 9 9
0.5
2.5 M2 15.5
6
2.5 2
3
SCB2-5 4 pcs.
S2M, P2M, 2GT6 16 7 11.58 3 M2.5
193
2.25
SCB2.5-5 4pcs.10 20 11 15.5 23
3
6 16
16.5 1.5
7 11.5 11.5
0.7 3 M2.5
19
10 3 4 SCB2.5-5 4pcs.
S3M, P3M, MA3,3GT*210 20 11 15.5
1023
15 25 16 20.5 28
Part Number BeltNominal
WidthType Belt Pitch
TBCL 3 - 10
Part Number Belt Nominal Width
Unit Price Volume Discount RateTYPE Belt Pitch 1~3 pc(s). 4~9 pcs. 10~99 pcs. 100~199 pcs. 200~500 pcs.
TBC
24 6
10
36
10 15
TBCL
24 6
10
36
10 15
E�For orders larger than indicated quantity, please check with WOS.