Time-Saving Wellheads - GE Oil & Gas · PDF fileGE Oil & Gas Time-Saving Wellheads RSH-2-N...
Transcript of Time-Saving Wellheads - GE Oil & Gas · PDF fileGE Oil & Gas Time-Saving Wellheads RSH-2-N...
GE Oil & Gas
Time-Saving WellheadsRSH-2-N 13-5/8” 5M Riser Speedhead™ System
The RSH-2-N Riser Speedhead is an all-purpose speedhead system that combines eight field-proven Pressure Control technologies to improve safety and to reduce well cost by maximizing efficiency for the most demanding drilling applications using the latest generation walking drilling rigs and top drive CRTs. Distinct from the rest of the RSH product line, the 11” upper bowl of the RSH-2-N is nested inside the lower packoff. A wide range of casing hanger choices are available to fit most requirements. When drilling operations are complete, the RSH-2-N housing converts to an API 13-5/8” 5M flange profile to allow installation of standard tubing heads.
Features • Time saving
– No waiting on surface casing cement required; surface casing is run, suspended, and cemented with RSH-2 housing installed
– No field welding – Quick-connect RSH-USC drilling adapter makes up in about
20 minutes to minimize BOP nipple-up and nipple-down time – Wear bushing is quickly run and retrieved without operating
wellhead lockscrews in the cellar – When mandrel hanger for production casing is used, patented
“RT” rotating casing hangar is standard – Lock rings are engaged from the rig floor without operating
wellhead lockscrews in the cellar
• Improved well control – Both intermediate and production mandrel hangers and packoffs
are locked in and seals are tested before BOP is removed – Back pressure valve prep is standard in mandrel production
hanger systems – Back pressure valve prep is available with slip casing hangers for
production casing BPV use during frac and completion operations
• Improved safety – No lockscrews—minimal body penetrations – Reduced time for personnel working in the cellar – Hot work is eliminated
• 11” upper bowl is nested inside the lower packoff, which is interchangeable with the rest of the RSH product line, thereby reducing your inventory requirements and costs
• Choice of casing hangers – Patented “RT” rotating mandrel casing hanger allows production
casing hanger and pup joint to be made up to casing string with a CRT; Casing may be rotated to the right while landing the hanger and during cementing, if desired.
– BPV prep available for slip hangers with optional packoffs – Standard W2 and W1-M slip hangers may be run for production
casing when BPV prep is not required • Choice of tubing heads and completions – T tubing head with 7-1/16” top (TD for dual completions) – MTH2 or MTH-2FB tubing head with 4-1/16” top or 5-1/8” top
Availability
Available extended-height tubing head raises valves
above ground level if TA cap was installed
RSH-2 Housing
Type H BPV Prep
Conductor Surface CasingIntermediate
Casing Production Casing20” x 1/4” WT 13-3/8” 9-5/8” 4-1/2”, 5-1/2”, 7”20” x 3/8” WT 13-3/8” 9-5/8” 4-1/2”, 5-1/2”
Other sizes available upon request.
13-5/8” 5M RSH-2-N 20” x 13-3/8” x 9-5/8” x 5-1/2”
with RT mandrel hanger and 7-1/16” 10M T tubing head
295-6656
ConductorSurface Casing
Production Casing
Intermediate Casing
13-5/8” 5M RSH-2-N 20” x 13-3/8” x 9-5/8” x 5-1/2”
with W1-M or W2 slips and 7-1/16” 10M T tubing head
295-6657
ConductorSurface Casing
Production CasingIntermediate Casing
5-1/2” “RT” Mandrel Hanger
W1-M Slip Hanger
Available extended-height tubing head raises valves
above ground level if TA cap was installed
RSH-2 Housing
W2 Slip Hanger
GE © 2016. All rights reserved.08/16, PC #16-0073
geoilandgas.com
RSH-2-N 13-5/8” 5M Riser Speedhead™ System
RSH-2-N 13-5/8” 5M x 13-3/8” casing head landed through the drilling riser; options for “riserless” cementing are available
ConductorSurface Casing
295-6652
24” RiserRunning Tool
Landing Joint
RSH-2 Housing
Save up to 4 to 5 hours wait-on-cement time. Save up to 5 to 6 hours versus cutting conductor and surface casing, and welding wellhead to surface casing.
Quick-connect 5M RSH-USC drilling adapter makes up in about 20 minutes
RSH-2-N with 7-1/16” 10M T tubing head
TA caps on multi-well pads
BOP
RSH-2 Housing
ConductorSurface Casing
295-6653
RSH-USC Drilling Adapter
13-5/8” 5M RSH-2-N 20” x 13-3/8” x 9-5/8” x 5-1/2” with TA cap
Type H BPV Prep
295-6654
ConductorSurface Casing
5-1/2”Production Casing
Intermediate Casing
13-5/8” 5M
RSH-2 Housing
W1 Slip Hanger
13-5/8” 5M RSH-2-N 20” x 13-3/8” x 9-5/8” x 5-1/2” with BPV prep over W2 or W1 slip hangers and 7-1/16” 10M T tubing head
RSH-2 Housing
295-6655
ConductorSurface Casing
5-1/2” Production CasingIntermediate Casing
Available extended-height tubing head raises valves
above ground level if TA cap was installed
RSH-UPR-W2 Slip Hanger
BPV Prep
BPV Prep
Patented “RT” rotating casing hanger allows the production casing to be rotated to the right while landing the hanger and during cementing
295-6631
“RT” Running Tool with
Torque Pins
RSH-UPR-RT Mandrel
Hanger with BPV Prep