Tifa
-
Upload
osvaldo-penicela -
Category
Documents
-
view
37 -
download
1
Transcript of Tifa
tifa-lite
tifa
Form-Scaff is South Africa’s leading supplier of formwork, falsework and scaffolding to
the construction and civil engineering industries. Form-Scaff not only manufactures,
hires and sells world-class products, but also provides the design skills, technical advice
and support that comes with having almost 50 years experience and 30 branches locally
and internationally.
This indigenous expertise is complemented by the international depth and breadth of its
holding company, WACO International, a leading global commercial and industrial service
business focusing on the manufacturing, rental and sale of formwork, falsework and
scaffolding equipment as well as the burgeoning re-locatable and modular buildings industry.
WACO International operates in Africa, the UK, Australia, New Zealand and Chile.
Form-Scaff is a division of WACO Africa (Pty) Ltd, a joint venture company owned by
WACO International and respected local black empowerment company, Kagiso.
Disclaimer: Copyright in this catalogue vests in Form-Scaff, a division of Waco Africa (Proprietary) Limited (”Form-Scaff”) and extends inter alia, to the making of copies in whole or in part without the prior written consent of Form-Scaff.
While every effort has been made to ensure the accuracy of the information in this catalogue, we cannot accept responsibility for any errors which may occur as a result of reliance on the contents of this catalogue and are not liable for any loss of any nature that may be incurred as a result of such reliance. Details of any of the products may change without prior notice.
The customer must ensure that ‘good practice’ is adopted on site by competent persons and that the products shown in this catalogue are erected, used and stripped in accordance with the relevant Codes of Practice and the OHS Act and Regulations 85 of 1993. This catalogue does not contain any design detail but lists and depicts the items available under this product range. The responsibility for design is the responsibility of the customer.
Australia New Zealand South Africa South AfricaSouth AfricaUnited Kingdom
AustraliaSouth Africa
Saudi Arabia
Angola
Zambia
South Africa
Mauritius
Formwork, Shoring& Scaffolding WACO WORLDWIDE Modular &
Relocatable Buildings
Page 2 The new generation wall
formwork system
Page 4 Panels
Page 6 Secondary Panels
Page 8 Alignment Bars, Stop-end Hooks
& Levelling Jacks
Page 10 Clamps
Page 11 Ties
Page 12 Propping System & Working Platforms
Page 14 Single Sided Walls
Page 16 Lifting
Page 18 Climbing
Page 20 Manhandled system of choice
Page 22 Panels
Page 24 Secondary Panels
Page 26 Alignment Bars, Stop-end Hooks
& Levelling Jacks
Page 28 Clamps
Page 29 Clamps & Ties
Page 30 Propping System
Page 31 Propping System & Working Platforms
Page 32 Lifting
Page 34 Climbing
Page 36 Circular Formwork
Contact Details
Page 37 Head Office & Branches
Contents
1
tifa
tifa-lite
2
The Tifa system is a new generation wall formwork solution.
It is a heavy duty, crane handled system for large areas and the Panels
are designed to withstand concrete pressures of up to 60kN/m2.
The system is steel framed and timber-faced to produce high quality
finishes. Erecting and dismantling the formwork is quick and easy.
Being quick and easy, Tifa translates into real labour and hire time
savings.
• Rigid heavy duty hollow-section steel frame for robust site
conditions.
• High grade hot dip galvanising for durability/long life.
• Standard SA 600mm wide modules (150mm increments).
• Compatible with Tifa-Lite, Econo-Form as well as other
European systems.
• Straight and circular applications available.
• Gang-forms and lifting applications available.
• Full range of safety features.
• High quality 21mm WISA-Form Combi plywood facing.
• 60kN/m2 permissible concrete pressure.
tifa
General Assembly
tifa
Scaffold Tube Handrail
Working Platform and Toe Board
Access Bracket
Prop Tie
Alignment Bar
Fixed Clamp
Tifa Panel
Levelling Jack
Push-pull Prop
Swivel Foot
4
Tifa Panels Tifa Panels are used to form the straight sides of
concrete walls.
CODE DESCRIPTION MASS(kg)
5110027 TIFA PANEL 900 x 300 29.0
5110065 TIFA PANEL 900 x 450 36.0
5110029 TIFA PANEL 900 x 600 46.0
5110064 TIFA PANEL 900 x 900 63.0
5105012 TIFA PANEL 1200 x 300 37.0
5105020 TIFA PANEL 1200 x 450 46.0
5105011 TIFA PANEL 1200 x 600 58.0
5105010 TIFA PANEL 1200 x 900 78.0
5105000 TIFA PANEL 1200 x 1200 96.0
5105005 TIFA PANEL 2700 x 300 76.0
5105006 TIFA PANEL 2700 x 450 93.0
5105004 TIFA PANEL 2700 x 600 113.0
5105003 TIFA PANEL 2700 x 900 148.0
5105002 TIFA PANEL 2700 x 1200 195.0
5105001 TIFA PANEL 2700 x 2400 440.0
OTHER SIZES AvAILABLE ON SPECIAL REqUEST Ex OUR FACTORy
Panels
Plastic Plugs & Steel Tie Hole Sleeves Plastic Plugs are used to seal the tie holes that are not in use.
Steel Tie Hole Sleeves are inserted into each tie hole to provide
a neat finish around each hole and also to protect the plywood
edges around the hole.
CODE DESCRIPTION MASS(kg)
5110301 STEEL TIE HOLE SLEEvE 26 (21 BOARD) 0.01
5110300 PLASTIC PLUG (21/15) 0.01
Tifa Panels vary in size to accommodate a wide
range of wall heights and lengths.
Plastic Plug
Steel Tie Hole Sleeve
Internal Corner Panel
Alignment Bar
Fixed Clamp
Twin Profile Infill
Adjustable Clamp
Dywidag Tie System
External Corner Panel
Tifa Panel
Hinged Splay Panel
tifa
General Assembly
6
Hinged Splay PanelsTifa Hinged Splay Panels are used to connect two Tifa Panels
together at any angle from 70o to 250o, both on the internal and
external faces of a splayed concrete wall.
Secondary Panels
External Corner PanelsTifa External Corner Panels are used to connect two Tifa Panels
together at 90o to each other at the external corners of a concrete
wall.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110028 TIFA ExTERNAL CORNER PANEL 900 10.5
5110020 TIFA ExTERNAL CORNER PANEL 1200 22.0
5110081 TIFA ExTERNAL CORNER PANEL 1500 25.2
5110006 TIFA ExTERNAL CORNER PANEL 2700 41.0
5110017 TIFA INTERNAL CORNER PANEL 900 x 300 x 300 39.0
5110026 TIFA INTERNAL CORNER PANEL 1200 x 300 x 300 65.0
5110025 TIFA INTERNAL CORNER PANEL 1500 x 300 x 300 91.2
5110014 TIFA INTERNAL CORNER PANEL 2700 x 300 x 300 130.0
5110070 TIFA HINGED SPLAy PANEL 900 x 300 x 300 51.0
5105014 TIFA HINGED SPLAy PANEL 1200 x 300 x 300 65.0
5125021 TIFA HINGED SPLAy PANEL 1500 x 300 x 300 91.0
5110013 TIFA HINGED SPLAy PANEL 2700 x 300 x 300 117.0
Internal Corner PanelsTifa Internal Corner Panels are used to connect two Tifa Panels
together at 90o to each other at the internal corners of a
concrete wall.
The Tifa Hinged
Splay Panels do
not have tie holes
Stripping Bars & Stripping Bar Extensions8mm Thick Tifa Stripping Bars are used at Tifa Panel joints to facilitate
the stripping of Tifa Panels in confined areas. Tifa Stripping Bar
Extensions are used to extend the length of the Stripping Bars
within the Tifa Panels.
CODE DESCRIPTION MASS(kg)
5110049 TIFA STRIPPING BAR 950 8.5
5110041 TIFA STRIPPING BAR 1250 10.5
5110040 TIFA STRIPPING BAR 1550 14.6
5110039 TIFA STRIPPING BAR 2450 22.0
5110038 TIFA STRIPPING BAR 2750 24.5
5110053 TIFA STRIPPING BAR ExTENSION 900 8.1
5110052 TIFA STRIPPING BAR ExTENSION 1200 12.1
5110082 TIFA STRIPPING BAR ExTENSION 1500 16.0
5110051 TIFA STRIPPING BAR ExTENSION 2400 22.0
5110050 TIFA STRIPPING BAR ExTENSION 2700 24.5
tifa
No end hammering plate on the ends
of the Tifa Stripping Bar extension
Holes for levers to
assist with stripping
L’s to locate the Stripping Bar up
against the back of Tifa Panels
CODE DESCRIPTION MASS(kg)
5110132 TIFA TWIN PROFILE INFILL 900 8.0
5110131 TIFA TWIN PROFILE INFILL 1200 11.0
5110130 TIFA TWIN PROFILE INFILL 2700 25.0
Twin Profile InfillsTifa Twin Profile Infills are used to support a plywood infill
between two Tifa Panels.
Angle Iron Lugs with holes for self tapping
screws to secure the plywood facing in position
Ef-Ti PanelsEf-Ti Panels are used to join Tifa Panels to Econo-Form Panels.
They are fixed to the Tifa Panels using Tifa Adjustable Clamps and
to the Econo-Form Panels using Tee and Wedge sets.
Econo-Form Panel
punched flat
The Tifa Ef-Ti Panels
do not have tie-holes
Tifa-Lite periphery
profile
CODE DESCRIPTION MASS(kg)
5110120 EF-TI PANEL 900 x 150 10.1
5110121 EF-TI PANEL 1200 x 150 13.1
5110122 EF-TI PANEL 2700 x 150 28.8
Levelling JacksTifa Levelling Jacks are used to level the bottom edge of Tifa
Panels along their length. They are attached to the Tifa Panels
using the Alignment Bar Clamps.
Alignment BarsTifa Alignment Bars are available in two lengths, 920mm and
1220mm. They are used to align the Tifa Panels, afford backing
for timber infill between the Panels and to stiffen joints when the
Panels are lifted.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110015 TIFA ALIGNMENT BAR 920 11.5
5110135 TIFA ALIGNMENT BAR 1220 15.3
5110034 TIFA ALIGNMENT BAR CLAMP 1.9
5110206 TIFA STOP-END HOOK 1.1
5110203 TIFA LEvELLING JACK 10.5
Stop-end HooksTifa Stop-end Hooks are used to secure the Tifa Alignment Bars
in position when the Alignment Bars are used to support the
stop-end of a concrete wall.
8
Alignment Bars, Stop-end Hooks and Levelling Jacks
Tifa Alignment Bar Clamp
Dywidag Combi Nuts or Tifa Wing
Nuts complete with Washer may be
used with the Stop-end Hook
36mm A/F spanner is required
100mm run-out max
Hooks fit over the 16mm dia.
attachment pins in the Panels
Tifa Alignment Bar
is clamped over the
Panel joint to keep the
Panels in a straight line
Application - Stop-ends
Application 2 - Alignment and Levelling
tifa
Levelling Jack
Tifa Twin Profile Infill
Tifa Alignment Bar
Tifa Panel
Tifa Stop-end Hook
Dywidag Combi Nut
Max 100mm thread adjustment
10
Tifa-Euro ClampTifa-Euro Clamps are used to connect Tifa Panels to other
European Systems.
Clamps
Fixed ClampsTifa Fixed Clamps are used to fix two Tifa Panels together.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110001 TIFA FIxED CLAMP 3.7
5110004 TIFA ADJUSTABLE CLAMP 6.3
5110250 TIFA-EURO CLAMP 5.3
Adjustable ClampTifa Adjustable Clamps are used to fix Tifa Panels together
where Stripping Bars or an infill is used between the Panels.
They are also used to clamp the External Corner Panels, Internal
Corner Panels and Hinged Splay Panels into position.
Ties15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa Wing
Nuts complete with Washers are to be used with the Tifa System.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5405077 DyWIDAG BAR 15mm 500 0.7
5405078 DyWIDAG BAR 15mm 1000 1.5
5405079 DyWIDAG BAR 15mm 1500 2.2
5405085 DyWIDAG BAR 15mm 2000 2.9
5405086 DyWIDAG BAR 15mm 2500 3.6
5405087 DyWIDAG BAR 15mm 3000 4.3
5405088 DyWIDAG BAR 15mm 3500 5.1
5405089 DyWIDAG BAR 15mm 4000 5.8
5405092 DyWIDAG BAR 15mm 4500 6.5
5405093 DyWIDAG BAR 15mm 5000 7.2
5405094 DyWIDAG BAR 15mm 5500 8.0
5405095 DyWIDAG BAR 15mm 6000 8.7
5110032 TIFA WING NUT 1.8
5110035 WASHER 100 x 100 x 6 0.5
5110150 DyWIDAG COMBI NUT 1.2
5125028 TIFA TOP TIE BRACKET 1.8
Top Tie BracketsTifa Top Tie Brackets fit onto the periphery profile of the Tifa
Panels. They are used to keep the ties, over the top of the Tifa
Panels, in place.
tifaTies
Dywidag Bar complete with Combi Nut
Top Tie Bracket
Application - Ties
Dywidag Combi Nut
100 x 100 x 6 Washer
Slot for the Dywidag Bar
Tifa Wing Nut
Dywidag Bar complete with
Combi Nut
Dywidag Bar
12
Propping System and Working Platforms
Prop Connecting BracketsTifa Prop Connecting Brackets are used to attach the 4200, 3100
or 2500 long Tifa Push-pull Props and Tifa Prop Ties to the Tifa Panels.
CODE DESCRIPTION MASS(kg)
5110012 TIFA PROP CONNECTING BRACKET 2.5
Prop Connecting Brackets HDTifa Prop Connecting Brackets HD are used to attach the 5700
long Tifa Push-pull Props to the Tifa Panels.
CODE DESCRIPTION MASS(kg)
5110057 TIFA PROP CONNECTING BRACKET HD 5.0
Swivel FootThe Tifa Swivel Foot is used at the base of the Push-pull Props
and Prop Ties to connect the ends of the Props together.
CODE DESCRIPTION MASS(kg)
5110008 TIFA SWIvEL FOOT 200 x 150 3.4
5110021 TIFA SWIvEL FOOT 300 x 250 7.6
Pins and R-ClipTifa Connecting Pins 16 x 90 complete with R-Clips are used to
connect a Prop to the Connecting Brackets and Swivel Foot.
CODE DESCRIPTION MASS(kg)
PinR-Clip
5110090 TIFA CONNECTING PIN 16 x 90 0.2
5110059 R-CLIP 0.01
Access BracketsTifa Access Brackets are used to provide access for site personnel.
Tifa Access Brackets are not to be used as a loading platform.
Push-pull Props and Prop TiesTifa Push-pull Props and Tifa Prop Ties are used to plumb
the Tifa Panels.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110100 TIFA PROP TIE 8.4
5110007 TIFA PUSH-PULL PROP 2500 14.0
5110024 TIFA PUSH-PULL PROP 3100 16.6
5110201 TIFA PUSH-PULL PROP 4200 20.0
5110022 TIFA PUSH-PULL PROP 5700 63.3
5110110 TIFA WALER BRACKET 2.0
5110010 TIFA ACCESS BRACKET 12.0
Waler BracketsTifa Waler Brackets are used to fix the scaffold tube to the Tifa
Panels. The Tifa Waler Brackets hook onto the 16mm diameter
attachment pins located in the Tifa Panels.
tifa
Always attach
safety handrails
Attach working
platform and Toe B
oard here
Support Frame HD WalersTifa Support Frame HD Walers are used to hold the Frames
down at the base of a concrete wall (using cast-in anchors).
Support FramesThe crane handled Tifa Support Frames are used to secure the
Tifa Wall Panels in position and also eliminate the need for
through ties.
CODE DESCRIPTION MASS(kg)
5110087 TIFA SUPPORT FRAME 3700 300.0
5110088 TIFA SUPPORT FRAME ExTENSION 1900 150.0
CODE DESCRIPTION MASS(kg)
5110091 TIFA SUPPORT FRAME HD WALER 1200 28.0
5110089 TIFA SUPPORT FRAME HD WALER 2400 55.0
HD Waler Hook BoltsThe Frames are fixed to the Tifa Panels using Tifa Alignment
Bars and Tifa HD Waler Hook Bolts.
14
Single Sided Walls
Tifa Support Frame Extension 1900
Tifa HD Waler Hook Bolt
Dywidag Combi Wing Nut
Tifa Support Frame 3700
The shutter is plumbed using the
built-in Tifa Support Frame Plumbing
Jack (240mm max. adjustment)
The frames must be laced and braced together
using 50x50 Half Couplers or Flange Couplers
and Scaffold Tube
5110123 TIFA HD WALER HOOK BOLT 2.0
5110150 DyWIDAG COMBI WING NUT 1.14
CODE DESCRIPTION MASS(kg)
Tifa Panel Tifa Support Frame 3700
Scaffold Tube
Bracing
Tifa Support Frame
HD Waler 1200
Tifa Support Frame
Extension 1900
Tifa Support Frame
Plumbing Jack
Tifa Fixed Clamp
Alignment Bar and HD
Waler Hook Bolt
Application - Single Sided Tifa
tifa
Dywidag Combi Wing Nut
Scaffold Tube
Lacing
Lifting HooksThe Tifa Lifting Hook is used to lift the Tifa system and must
preferably be used in conjunction with the Tifa Lifting Beam.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110018 TIFA LIFTING HOOK 7.7
5110093 TIFA LIFTING BEAM 3300 C/W CHAINS 175.0
Lifting BeamsTifa Lifting Beams are preferably used in conjunction with the
Tifa Lifting Hooks and chain slings to lift the Tifa System.
16
Lifting
Application - Lifting Hooks
Six lug positions, at a spacing of 600mm,
to locate the two vertical (1250mm long)
chain slings that are provided with each
Lifting Beam
Attach the crane slings here
A gravity lock ensures that they are safely
fixed to the periphery of the Tifa Panels
Two top lifting lugs are
fitted with D shackles
for the crane slings
Application - Lifting
Contact your nearest Form-Scaff branch for information about lifting the Tifa system
tifa
1250mm long Chain Sling
Crane Sling
Tifa Lifting Beam
Tifa Panel
Alignment Bar
Tifa Lifting Hook
Form Hanging BracketsForm Hanging Brackets are used to provide access for site
personnel and to recover the Anchor Screws from previous
concrete pours.
Anchor ScrewsAnchor Screws are used to keep the Form Wall Brackets
in position.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
2965901 ANCHOR SCREW 120 0.58
2965902 ANCHOR SCREW 200 1.0
2965903 ANCHOR SCREW 280 1.1
2965904 ANCHOR SCREW 430 4.0
5110099 FORM WALL BRACKET 3.9
5405023 FORM SUPPORT BRACKET 25.7
5405024 FORM HANGING BRACKET 23.9
Form Wall BracketsForm Wall Brackets are used to support the Form
Support Brackets.
Form Support BracketsWhen climbing the Tifa system, Form Support Brackets are
used to support the Tifa system at various levels of the climb.
18
Climbing
Hole for the grade 8.8
set screw
Attach access platform here
Fit the safety
handrails here
Attach the safety
handrail here
Attach the working
platform here
Attach the Hanging Access here
Hole for the grade 8.8 set screw
Application - Climbing
tifa
Tifa Access Bracket
with safety handrail
Tifa Panel
Form Support Bracket
with safety handrail
Push-pull Prop
Working Platform
with Toe Board
Form Hanging
Bracket with
safety handrail
20
Tifa-Lite is the system of choice for manhandled formwork. With less
components than traditional Econo-Form panels, Tifa-Lite will save you
time and effort on formwork assembly. The high quality WISA-Form
plywood delivers superior finishes.
1200 / 1500 / 2700 height modules
System Features
• Lightweight hollow-section steel frame for easy handling.
• High grade hot dip galvanising for durability/long life.
• Standard SA 600mm wide modules (150mm increments).
• Compatible with Tifa, Econo-Form as well as other
European systems.
• Straight and circular applications available.
• Gang-forms and lifting applications available.
• Full range of safety features.
• High quality 15mm WISA-Form plywood.
• 60kN/m2 permissible concrete pressure.
tifa-lite
General Assembly
tifa-lite
Scaffold Tube Handrail
Working Platform and Toe Board
Access Bracket
Prop Tie
Crab Clamp
Dywidag Bar
complete with
Combi Nut
Tifa-Lite Panel
Push-pull Prop
Swivel Foot
22
Panels Tifa-Lite Panels are used to form the straight sides of
concrete walls.
Panels
Plastic Plugs & Steel Tie Hole Sleeves Plastic Plugs are used to seal the tie holes that are not in use.
Steel Tie Hole Sleeves are inserted into each tie hole to provide
a neat finish around each hole and also to protect the plywood
edges around the hole.
CODE DESCRIPTION MASS(kg)
5110302 STEEL TIE HOLE SLEEvE 21 (15 BOARD) 0.01
5110300 PLASTIC PLUG (21/15) 0.01
The Tifa-Lite Panels vary in size
to accommodate a wide range
of wall heights and lengths.
Plastic Plug
Steel Tie Hole Sleeve
tifa-lite
Application - Tifa-Lite System
Internal Corner Panel
Twin Profile Infill
Crab Clamp
Dywidag Tie System
Top Tie Bracket
External Corner Panel
Tifa-Lite Panel
Hinged Splay Panel
24
Hinged Splay PanelsTifa Hinged Splay Panels are used to connect two Tifa-Lite
Panels together at any angle from 70o to 250o, both on the
internal and external faces of a splayed concrete wall.
Secondary Panels
External Corner PanelsExternal Corner Panels are used to connect two Tifa-Lite Panels
together at 90o to each other at the external corners of a concrete
wall.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110028 TIFA ExTERNAL CORNER PANEL 900 10.5
5110020 TIFA ExTERNAL CORNER PANEL 1200 22.0
5110081 TIFA ExTERNAL CORNER PANEL 1500 25.2
5110006 TIFA ExTERNAL CORNER PANEL 2700 41.0
5110017 TIFA INTERNAL CORNER PANEL 900 x 300 x 300 39.0
5110026 TIFA INTERNAL CORNER PANEL 1200 x 300 x 300 65.0
5110025 TIFA INTERNAL CORNER PANEL 1500 x 300 x 300 91.00
5110014 TIFA INTERNAL CORNER PANEL 2700 x 300 x 300 130.0
5110070 TIFA HINGED SPLAy PANEL 900 x 300 x 300 51.0
5105014 TIFA HINGED SPLAy PANEL 1200 x 300 x 300 65.0
5125021 TIFA HINGED SPLAy PANEL 1500 x 300 x 300 91.0
5110013 TIFA HINGED SPLAy PANEL 2700 x 300 x 300 117.0
Internal Corner PanelsInternal Corner Panels are used to connect two Tifa-Lite Panels
together at 90o to each other at the internal corners of a
concrete wall.
The Hinged
Splay Panels
do not have
tie holes
Stripping Bars & Stripping Bar Extensions8mm Thick Tifa Stripping Bars are used at Tifa-Lite Panel joints to
facilitate the stripping of Tifa-Lite Panels in confined areas. Tifa
Stripping Bar Extensions are used to extend the length of the
Stripping Bars within the Tifa-Lite Panels.
Ef-Ti PanelsEf-Ti Panels are used to join Tifa-Lite Panels to Econo-Form Panels.
They are fixed to the Tifa-Lite Panels using Tifa-Lite Fixed Clamps
and to the Econo-Form Panels using Tee and Wedge sets.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110120 EF-TI PANEL 900 x 150 10.1
5110121 EF-TI PANEL 1200 x 150 13.1
5110122 EF-TI PANEL 2700 x 150 28.8
5110132 TIFA TWIN PROFILE INFILL 900 8.0
5110131 TIFA TWIN PROFILE INFILL 1200 11.0
5110083 TIFA TWIN PROFILE INFILL 1500 13.8
5110130 TIFA TWIN PROFILE INFILL 2700 25.0
5110049 TIFA STRIPPING BAR 950 8.5
5110041 TIFA STRIPPING BAR 1250 10.5
5110040 TIFA STRIPPING BAR 1550 14.6
5110039 TIFA STRIPPING BAR 2450 22.0
5110038 TIFA STRIPPING BAR 2750 24.5
5110053 TIFA STRIPPING BAR ExTENSION 900 8.1
5110052 TIFA STRIPPING BAR ExTENSION 1200 12.1
5110082 TIFA STRIPPING BAR ExTENSION 1500 16.0
5110051 TIFA STRIPPING BAR ExTENSION 2400 22.0
5110050 TIFA STRIPPING BAR ExTENSION 2700 24.5
Twin Profile InfillsTifa Twin Profile Infills are used to support a plywood infill
between two Tifa-Lite Panels.
tifa-lite
Econo-Form Panel
punched flat
No end hammering plate on the ends
of the Tifa Stripping Bar extension
Holes for levers to
assist with stripping
L’s to locate the Stripping Bar up
against the back of Tifa-Lite Panels
Angle Iron Lugs with holes for self tapping
screws to secure the plywood facing in position
Tifa-Lite periphery
profile
Levelling JacksTifa-Lite Levelling Jacks are used to level the bottom edge of
Tifa-Lite Panels along their length.
Alignment Bars Tifa Alignment Bars are available in two lengths, 920mm and
1220mm. They are used to align the Tifa-Lite Panels, afford
backing for timber infill between the Tifa-Lite Panels and to stiffen
joints when the Panels are lifted from the horizontal position by
crane.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110015 TIFA ALIGNMENT BAR 920 11.5
5110135 TIFA ALIGNMENT BAR 1220 15.3
5110034 TIFA ALIGNMENT BAR CLAMP 1.9
5110206 TIFA STOP-END HOOK 1.1
5125035 TIFA-LITE LEvELLING JACK 8.0
Stop-end HooksTifa Stop-end Hooks are used to secure the Tifa Alignment Bars
in position when the Alignment Bars are used to support the
stop-end of a concrete wall.
26
Alignment Bars, Stop-end Hooks and Levelling Jacks
Hooks fit over the
16mm dia. attachment
pins in the Panels
Dywidag Combi Nuts or Tifa Wing
Nuts complete with Washer may be
used with the Stop-end Hook
Tifa Alignment Bar Clamp
36mm A/F spanner is required
100mm run-out max
Alignment Bars, Stop-end Hooks and Levelling Jacks
Tifa Twin Profile Infill
Tifa-Lite Panel
Application - Stop-ends
Stop-end Hook
Dywidag Combi Nut
Tifa Alignment Bar to support
the Stop-end
tifa-lite
28
Tifa-Lite Crab ClampThe Tifa-Lite Crab Clamp may be used to fix Tifa-Lite Panels side
by side. They are also used to clamp the External Corner Panels,
Internal Corner Panels and Hinged Splay Panels into position.
Clamps
Fixed ClampsTifa-Lite Fixed Clamps are used to fix two Tifa-Lite
Panels together.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5125010 TIFA-LITE FIxED CLAMP 4.4
5125019 TIFA-LITE ADJUSTABLE CLAMP 6.4
CODE DESCRIPTION MASS(kg)
5125034 TIFA-LITE CRAB CLAMP 1.7
Adjustable ClampTifa-Lite Adjustable Clamps are used to fix Tifa-Lite Panels
together where Stripping Bars or an infill is used between the
Panels. They are also used to clamp the External Corner Panels,
Internal Corner Panels and Hinged Splay Panels into position.
CODE DESCRIPTION MASS(kg)
5110250 TIFA EURO CLAMP 5.3
Tifa-Euro ClampThe Tifa-Euro Clamp is used to connect Tifa-Lite Panels to other
European Systems.
Clamps and Ties
Ties15mm Diameter Dywidag Bars with Dywidag Combi Nuts or Tifa
Wing Nuts complete with Washers are to be used with the Tifa
System.
CODE DESCRIPTION MASS(kg)
5125028 TIFA TOP TIE BRACKET 1.8
CODE DESCRIPTION MASS(kg)
5405077 DyWIDAG BAR 15mm 500 0.7
5405078 DyWIDAG BAR 15mm 1000 1.5
5405079 DyWIDAG BAR 15mm 1500 2.2
5405085 DyWIDAG BAR 15mm 2000 2.9
5405086 DyWIDAG BAR 15mm 2500 3.6
5405087 DyWIDAG BAR 15mm 3000 4.3
5405088 DyWIDAG BAR 15mm 3500 5.1
5405089 DyWIDAG BAR 15mm 4000 5.8
5405092 DyWIDAG BAR 15mm 4500 6.5
5405093 DyWIDAG BAR 15mm 5000 7.2
5405094 DyWIDAG BAR 15mm 5500 8.0
5405095 DyWIDAG BAR 15mm 6000 8.7
5110032 TIFA WING NUT 1.8
5110035 WASHER 100 x 100 x 6 0.5
5110050 DyWIDAG COMBI NUT 1.2
Top Tie BracketsTifa Top Tie Brackets fit onto the periphery profile of the Tifa-Lite
Panels. They are used to keep the ties, over the top of the
Tifa-Lite Panels, in place.
Dywidag Combi Nut
100 x 100 x 6 Washer
Slot for the Dywidag Bar
Tifa Wing Nut
Dywidag Bar
tifa-lite
30
Propping System
Push-pull Props and Prop TiesTifa Push-pull Props and Tifa Prop Ties are used to plumb the
Tifa-Lite Panels.
Swivel FootThe Tifa Swivel Foot is used at the base of the Push-pull Props
and Prop Ties to connect the ends of the Props together.
Pins and R-ClipTifa Connecting Pins 16 x 90 complete with R-Clips are used to
connect a Prop to the Connecting Brackets and Swivel Foot.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5110100 TIFA PROP TIE 8.4
5110007 TIFA PUSH-PULL PROP 2500 14.0
5110024 TIFA PUSH-PULL PROP 3100 16.6
5110201 TIFA PUSH-PULL PROP 4200 20.0
5110008 TIFA SWIvEL FOOT 200 x 150 3.4
5110090 TIFA CONNECTING PIN 16 x 90 0.1
5110059 R-CLIP 0.01
Pin
R-Clip
Access BracketsTifa-Lite Access Brackets are used to provide access for
site personnel.
Prop Connecting Brackets (Stiffener)Tifa-Lite Prop Connecting Brackets (Stiffener Type) are used to
attach the 4200, 3100 or 2500 long Tifa Push-pull Props and
Tifa Prop Ties to the Tifa-Lite Panels. The Brackets clamp onto any
Tifa-Lite Panel stiffener and anywhere along the length of the
Panel stiffener.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5125029 TIFA-LITE PROP CONNECTING BRACKET 1.3
(STIFFENER TyPE)
5110110 TIFA WALER BRACKET 2.0
CODE DESCRIPTION MASS(kg)
5125027 TIFA-LITE ACCESS BRACKET 14.1
Waler BracketsTifa Waler Brackets are used to fix the scaffold tube to the
Tifa-Lite Panels. The Tifa Waler Brackets hook onto the 16mm
diameter attachment pins located in the Tifa-Lite Panels.
Propping System and Working Platforms
Always attach
safety handrails
Attach working
platform here
Attach Toe Board here
tifa-lite
Lifting HooksThe Tifa-Lite Lifting Hook is used to lift the Tifa-Lite system and
must preferably be used in conjunction with the Tifa Lifting Beam.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
5125023 TIFA-LITE LIFTING HOOK 3.3
5110093 TIFA LIFTING BEAM 3300 C/W CHAINS 175.0
Lifting BeamsTifa Lifting Beams are preferably used in conjunction with the
Tifa-Lite Lifting Hooks to lift the Tifa-Lite System.
32
Lifting
Application - Lifting Hooks
Attach the crane sling here
Gravity Pin
The Tifa-Lite Lifting Hooks are designed to lock themselves
into position with the aid of a ‘Gravity Pin’. The Tifa-Lite Lifting
Hooks are connected to the Panel by inserting the ‘Gravity Pin’
through the 22mm dia. hole in the Panel periphery.
Six lug positions, at a spacing of 600mm,
to locate the two vertical (1250mm long)
chain slings that are provided with each
Lifting Beam
Two top lifting lugs are
fitted with D shackles
for the crane slings
Application - Lifting
Contact your nearest Form-Scaff branch for information about lifting the Tifa-Lite system
1250mm long Chain Sling
Crane Sling
Tifa Lifting Beam
Tifa-Lite Panel
Tifa-Lite Lifting Hook
tifa-lite
Form Hanging BracketsForm Hanging Brackets are used to provide access for site
personnel and to recover the Anchor Screws from previous
concrete pours.
Anchor ScrewsAnchor Screws are used to keep the Form Wall Brackets
in position.
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
CODE DESCRIPTION MASS(kg)
2965902 ANCHOR SCREW 200 1.0
2965903 ANCHOR SCREW 280 1.1
5110099 FORM WALL BRACKET 3.9
5405023 FORM SUPPORT BRACKET 25.7
5405024 FORM HANGING BRACKET 23.9
Form Wall BracketsForm Wall Brackets are used to support the Form
Support Brackets.
Form Support BracketsWhen climbing the Tifa-Lite system, Form Support Brackets are
used to support the Tifa-Lite system at various levels of the climb.
34
Climbing
Hole for the grade 8.8
set screw
Attach access platform here
Fit the safety
handrails here
Attach the safety
handrail here
Attach the working
platform here
Attach the Hanging Access here
Hole for the grade 8.8 set screw
Application - Climbing
Scaffold Tube Handrail
Form Hanging Bracket
Push-pull Prop
Form Support Bracket
complete with
safety handrail
Working Platform with Toe Board
Dywidag Tie
System
Tifa-Lite Panel
Form Wall Bracket
tifa-lite
36
Circular Formwork
Flex PanelsTifa-Lite Flex Panels are used to form radiused concrete walls.
Flex WalersTifa-Lite Flex Walers are located over each tie hole in the Flex
Panels. The tie is located through the opening in the Waler.
CODE DESCRIPTION MASS(kg)
5125016 TIFA-LITE FLEx PANEL 1200x200 14.0
5125015 TIFA-LITE FLEx PANEL 1200x250 15.0
5125014 TIFA-LITE FLEx PANEL 1200x300 16.0
5125007 TIFA-LITE FLEx PANEL 1500x200 16.4
5125008 TIFA-LITE FLEx PANEL 1500x250 17.6
5125009 TIFA-LITE FLEx PANEL 1500x300 18.8
5125033 TIFA-LITE FLEx PANEL 2700x200 26.8
5125026 TIFA-LITE FLEx PANEL 2700x250 29.0
5125025 TIFA-LITE FLEx PANEL 2700x300 31.2
Application - Circular Formwork
Tifa-Lite Flex Panels are fixed to the Tifa-Lite Panels
using Tifa-Lite Crab Clamps
A turnbuckle is used to adjust the ‘Flex’
of the Panel face
CODE DESCRIPTION MASS(kg)
5125011 TIFA-LITE FLEx WALER 8.9
Contact Details
Toll Free Helpline - Technical Advice Centre: 0800 20 50 29
RUSTENBURGP.O. Box 6996, Rustenburg, 03003 Ferro Street, RustenburgTel 014 538-2540, Fax 014 538-0087
SECUNDAP.O. Box 3781, Secunda, 23021 Winkelhaak Road, McGill Ext, EvanderTel 017 632-4230, Fax 017 632-4234
VEREENIGINGP.O. Box 1010, vereeniging, 1930Cnr Telford & van Riebeeck Street, DuncanvilleTel 016 455-1611, Fax 016 455-1566
WITBANKP.O. Box 3869, Witbank, 10352 Colliery Street, WitbankTel 013 690-2833, Fax 013 656-3713
COASTAL BRANCHES
BALLITOP.O. Box 715, Umhlali, 4390Labora Terra Industrial Park, Shakas Rock Road, BallitoTel 032 947-9430, Fax 032 947-0583
CAPE TOWNP.O. Box 37068, Chempet, 74426 Drill Avenue, Montague GardensTel 021 528-6500, Fax 021 551-1743
DURBAN SOUTHP.O. Box 485, Umbogintwini, 412016 Stroude Place, IsipingoTel 031 902-2677, Fax 031 902-2771
EAST LONDONP.O. Box 2734, Beacon Bay, 52055 Ray Craib Crescent, Beacon BayTel 043 748-2558, Fax 043 748-3691
GEORGEP.O. Box 218, Hartenbos, 6520Cnr Albert Street & Bridge Road, GeorgeTel 044 695-0294, Fax 044 695-1040
KZN REGIONAL OFFICE P.O. Box 33, New Germany, 3620178-180 Old Main Road, PinetownTel 031 713-9700 Fax 031 713-9715
MARGATEP.O. Box 1171, Margate, 4275Industrial Road, MargateTel 039 317-1708, Fax 039 317-4073
NEWCASTLEP.O. Box 906, Newcastle, 294022 Schonland Street, Industrial SitesTel 034 375-7697, Fax 034 375-6935
PIETERMARITZBURGP.O. Box 21946, Mayors Walk, 3208Market Road Ext, MkondeniTel 033 346-1767, Fax 033 346-1753
PORT ELIZABETHP.O. Box 2112, North End, 60564 Kendle Street, Neave Industrial AreaTel 041 453-2317, Fax 041 453-2524
RICHARDS BAYP.O. Box 1333, Richards Bay, 3900111 Aluminia Alley, Alton Industrial NorthTel 035 751-1140, Fax 035 751-1094
STRANDP.O. Box 1654, Somerset West, 7129Chilwan Crescent,Helderberg Industrial ParkTel 021 845-4090, Fax 021 845-4091
INTERNATIONALBRANCHES
CHILE - COPIAPORio Copiapo, 1949Plaza Comercio 2, Modulo 8 – Panamericana Norte, Copiapo, ChileTel +565 254 1561
CHILE - SANTIAGOCerro Portezuelo, 9801 Parque Industrial Portezuelo, quilicura, Santiago de ChileTel +562 738-5019Fax +562 738-6521
GHANA - ACCRAPlot L16, Accra Tema Motorway,Off Spintex Road,Motorway Industrial Area,Accra, GhanaCell +27 82 829 6627
MAURITIUS - PORT LOUISP.O. Box 748, Bell village, Port Louis WesternPlaine Lauzun Industrial EstateTel +230 211-0391Fax +230 211-0392
NAMIBIA - SWAKOPMUNDP.O. Box 2484, Swakopmund,36 Hidipo Hamutenya Street, SwakopmundTel +26464 46-2020Fax +26464 46- 2050
NAMIBIA - WINDHOEKP.O. Box 20286, Windhoek, 90005 Nickel Street, ProsperitasTel +26461 23-3693Fax +26461 23-3272
HEAD OFFICE
P.O. Box 669, Isando, 1600181 Barbara Road, ElandsfonteinTel 011 842-4000, Fax 011 842-4280
INLAND BRANCHES
BLOEMFONTEINP.O. Box 6610, Bloemfontein, 930022 Wilhelm Kotze Street, OoseindeTel 051 432-5555, Fax 051 432-4477
BURGERSFORTP.O. Box 2918, Burgersfort, 1150 Plot 2484, Ext 23 Dirk Winterbach Street, BurgersfortTel 013 004-0200
JOHANNESBURG EASTP.O. Box 26994, Boksburg, 1462Tunney Road, Gate 3, ElandsfonteinTel 011 842-4215, Fax 011 842-4111
JOHANNESBURG - KYA SANDP.O. Box 2884, Honeydew, 204040 Homestead Avenue, Kya SandTel 011 708-2227, Fax 011 708-1159
KATHUP.O. Box 1235, Kathu, 844633 Kalk Street, Industrial Area, KathuTel 053 723-2194, Fax 053 723-1078
KUSILEP.O. Box 4466, Pretoria, 0001Kusile Power Station, Balmoral Road, MpumalangaTel 082 578-4638
LEPHALALEP.O. Box 7495, Onverwaght, 0557Rietspruit Plot 23, Portion 46 Witkop Road, LephalaleTel 014 763-7982, Fax 014 763-7982
NELSPRUITP.O. Box 4485, Nelspruit, 1200Erf 379, Rocky DriftTel 013 758-1036, Fax 013 758-1063 POLOKWANEP.O. Box 3979, Polokwane, 070062 Goud Street, Laboria, PolokwaneTel 015 293-0450, Fax 015 293-0460
PRETORIAP.O. Box 4466, Pretoria, 0001Park Lane North, Highway Business Park, RooihuiskraalTel 012 621-9900, Fax 012 621-9931
WACO AFRICA / HEAD OFFICE: PO Box 669, Isando, 1600. 181 Barbara Road, Elandsfontein. Tel 011 842-4000, Fax 011 842-4280
Technical Advice Centre 0800 20 50 29 / 011 842-4011