TIBCO ActiveMatrix Adapter for SAP · † TIBCO ActiveMatrix Adapter for SAP Concepts Read this...

Two-Second Adv

TIBCO ActiveMatrix® Adapter for

SAP

Release NotesSoftware Release 7.1.0November 2014

antage®

Important Information

SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE.USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME.This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc.TIBCO, Two-Second Advantage, TIBCO Hawk, TIBCO Rendezvous, TIBCO Runtime Agent, TIBCO ActiveMatrix BusinessWorks, TIBCO Administrator, TIBCO Designer, TIBCO ActiveMatrix Service Gateway, TIBCO BusinessEvents, TIBCO BusinessConnect, and TIBCO BusinessConnect Trading Community Management are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/or other countries.Enterprise Java Beans (EJB), Java Platform Enterprise Edition (Java EE), Java 2 Platform Enterprise Edition (J2EE), and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle Corporation in the U.S. and other countries.All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only.THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM.THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME.THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.Copyright © 1999-2014 TIBCO Software Inc. ALL RIGHTS RESERVED.TIBCO Software Inc. Confidential Information

| iii

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viTIBCO ActiveMatrix Adapter for SAP Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viOther TIBCO Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viThird-Party Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Connecting with TIBCO Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiiHow to Join TIBCOmmunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiiHow to Access TIBCO Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiiHow to Contact TIBCO Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

New Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Changes in Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Deprecated and Removed Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Deprecated Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Removed Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Migration and Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Migrating from 6.2.x/7.0.0 to 7.1.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Migrating from 6.1.0 and Earlier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Closed Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Known Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

TIBCO ActiveMatrix Adapter for SAP Release Notes

iv | Contents


| v

Preface

TIBCO ActiveMatrix Adapter for SAP is used as a bi-directional gateway between SAP applications and applications configured for the TIBCO environment.

The adapter can remotely connect and operate with SAP systems running on OS platforms not supported by the adapter.

Topics

• Related Documentation, page vi

• Typographical Conventions, page ix

• Connecting with TIBCO Resources, page xii


vi | Related Documentation

Related Documentation

This section lists documentation resources you may find useful.

TIBCO ActiveMatrix Adapter for SAP DocumentationThe following documents form the TIBCO ActiveMatrix Adapter for SAP documentation set:

• TIBCO ActiveMatrix Adapter for SAP Concepts Read this manual for terminology and concepts of the product. Before reading other manuals in this documentation set, you need to be familiar with the information in this manual.

• TIBCO ActiveMatrix Adapter for SAP Installation Read this manual for instructions on site preparation and installation.

• TIBCO ActiveMatrix Adapter for SAP Configuration and Deployment Read this manual for instructions on how to create, configure, and deploy adapter projects.

• TIBCO ActiveMatrix Adapter for SAP Examples Read this manual to work through the examples provided with the adapter.

• TIBCO ActiveMatrix Adapter for SAP Release Notes Read the release notes for a list of new and changed features. This document also contains lists of known issues and closed issues for this release.

• TIBCO ActiveMatrix Adapter Framework Documentation Read this documentation for instructions on how to install, configure and deploy the adapter in TIBCO ActiveMatrix BusinessWorks 6.

Other TIBCO Product DocumentationYou may find it useful to read the documentation for the following TIBCO products:

Table 1 TIBCO Products (Sheet 1 of 3)

TIBCO Product Description

TIBCO ActiveMatrix BusinessWorks™ This product provides an integration platform that enables companies to rapidly integrate systems and automate business processes.


Preface | vii

TIBCO ActiveMatrix® Adapter Framework This product provides a visual, model-driven development environment for configuring supported TIBCO adapters in TIBCO Business Studio.

TIBCO ActiveMatrix® Implementation Typefor TIBCO® Adapters

This product provides capabilities to upload and deploy adapter configurations (packaged as EAR files) using TIBCO ActiveMatrix Administrator GUI.

TIBCO ActiveMatrix® Service Bus This product is a lightweight enterprise service bus (ESB) that mediates the communication between applications and services by routing and transforming disparate data formats and transport protocols.

TIBCO ActiveMatrix® Service Grid This product is a scalable and extensible platform for developing, deploying, and managing applications that conform to a service-oriented architecture.

TIBCO® Adapter SDK This product provides a class library that helps developers implement an adapter with minimal effort.

TIBCO Administrator™ This product provides capabilities for managing users, monitoring machines, and deploying and managing applications that use TIBCO products.

TIBCO Business Studio™ This product provides capabilities that help business analysts document business processes, solution engineers implement business processes, and SOA developers create composite applications.

TIBCO Designer™ This product provides a graphical user interface to create TIBCO ActiveMatrix BusinessWorks process definitions, or create or modify TIBCO Adapter configurations.

TIBCO Enterprise Message Service™ This product sends messages from your applications in a format that conforms to the Java Messaging Service (JMS) specification.

TIBCO Hawk® This product is for monitoring and managing distributed applications and systems throughout the enterprise.

TIBCO Rendezvous® This product uses messages to enable distributed application programs to communicate across a wide variety of hardware platforms and programming languages.




viii | Related Documentation

Third-Party DocumentationYou may also find it useful to read the documentation on the following websites:

• http://help.sap.com

This website is the SAP Help Portal where you can find documentation on all SAP products, including SAP ECC 6.0 releases and SAP NetWeaver. In order for TIBCO ActiveMatrix Adapter for SAP to exchange data with SAP systems, you must make configurations in the SAP system to allow for communication and the exchange of messages to take place. This website offers detailed information on such configurations.

• http://service.sap.com/instguides

This website is provided by the SAP Support Portal and contains documentation on installations and upgrades. The documentation available contains information on components that can be used along with TIBCO ActiveMatrix Adapter for SAP, and the installation of the Secure Network Communications (SNC) libraries where security is required between the adapter and SAP systems.

• http://service.sap.com/connectors

This website provides information on the different types of SAP Connectors available. TIBCO ActiveMatrix Adapter for SAP is based on the SAP Java Connector libraries. You can download the latest versions of these libraries from this website. For more information on the SAP JCo libraries and configuration related to these libraries, see the available documentation on this website.

TIBCO Runtime Agent™ This product is a bundle of TIBCO software and third-party software that is required to run many TIBCO applications such as TIBCO ActiveMatrix BusinessWorks, TIBCO Adapters, and so on.




http://service.sap.com/connectors

http://help.sap.com

http://service.sap.com/instguides

Preface | ix

Typographical Conventions

The following typographical conventions are used in this manual.

Table 2 General Typographical Conventions

Convention Use

ENV_NAME

TIBCO_HOME

TIBCO products are installed into an installation environment. A product installed into an installation environment does not access components in other installation environments. Incompatible products and multiple instances of the same product must be installed into different installation environments.

An installation environment consists of the following properties:

• Name Identifies the installation environment. This name is referenced in documentation as ENV_NAME. The default value is TIBCO_HOME.

• Directory The folder into which the product is installed. This folder is referenced in documentation as TIBCO_HOME.

TIB_ADR3_HOME TIBCO ActiveMatrix Adapter for SAP is installed into a directory within a TIBCO_HOME directory. This directory is referenced in documentation as TIB_ADR3_HOME. The default value of TIB_ADR3_HOME depends on the operating system. For example, on Windows systems, the default value is C:\tibco\adapter\adr3\ReleaseNumber.

code font Code font identifies commands, code examples, filenames, pathnames, and output displayed in a command window. For example: Use MyCommand to start the foo process.

bold code font Bold code font is used in the following ways:

• In procedures, to indicate what a user types. For example: Type admin.

• In large code samples, to indicate the parts of the sample that are of particular interest.

• In command syntax, to indicate the default parameter for a command. For example, if no parameter is specified, MyCommand is enabled: MyCommand [enable | disable].


x | Typographical Conventions

italic font Italic font is used in the following ways:

• To indicate a document title. For example: See TIBCO ActiveMatrix Adapter for SAP Concepts.

• To introduce new terms. For example: A portal page may contain several portlets. Portlets are mini-applications that run in a portal.

• To indicate a variable in a command or code syntax that you must replace. For example: MyCommand PathName.

Key combinations Key name separated by a plus sign indicate keys pressed simultaneously. For example: Ctrl+C.

Key names separated by a comma and space indicate keys pressed one after the other. For example: Esc, Ctrl+Q.

The note icon indicates information that is of special interest or importance, for example, an additional action required only in certain circumstances.

The tip icon indicates an idea that could be useful, for example, a way to apply the information provided in the current section to achieve a specific result.

The warning icon indicates the potential for a damaging situation, for example, data loss or corruption if certain steps are taken or not taken.

Table 2 General Typographical Conventions (Cont’d)

Convention Use


Preface | xi

Table 3 Syntax Typographical Conventions

Convention Use

[ ] An optional item in a command or code syntax.

For example:

MyCommand [optional_parameter] required_parameter

| A logical OR that separates multiple items of which only one may be chosen.

For example, you can select only one of the following parameters:

MyCommand param1 | param2 | param3

{ } A logical group of items in a command. Other syntax notations may appear within each logical group.

For example, the following command requires two parameters, which can be either the pair param1 and param2, or the pair param3 and param4.

MyCommand {param1 param2} | {param3 param4}

In the next example, the command requires two parameters. The first parameter can be either param1 or param2 and the second can be either param3 or param4:

MyCommand {param1 | param2} {param3 | param4}

In the next example, the command can accept either two or three parameters. The first parameter must be param1. You can optionally include param2 as the second parameter. And the last parameter is either param3 or param4.

MyCommand param1 [param2] {param3 | param4}


xii | Connecting with TIBCO Resources

Connecting with TIBCO Resources

How to Join TIBCOmmunityTIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts. It is a place to share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety of resources. To register, go to http://www.tibcommunity.com.

How to Access TIBCO DocumentationYou can access TIBCO documentation here:

https://docs.tibco.com

How to Contact TIBCO SupportFor comments or problems with this manual or the software it addresses, contact TIBCO Support as follows:

• For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site:

http://www.tibco.com/services/support

• If you already have a valid maintenance or support contract, visit this site:

https://support.tibco.com

Entry to this site requires a user name and password. If you do not have a user name, you can request one.


http://www.tibco.com/services/support


https://docs.tibco.com

http://www.tibcommunity.com

| 1

Release Notes

This document includes release notes for TIBCO ActiveMatrix Adapter for SAP, Software Release 7.1.0.

Check the TIBCO Product Support web site at https://support.tibco.com for product information that was not available at release time. Entry to this site requires a username and password. If you do not have a username, you can request one. You must have a valid maintenance or support contract to use this site.

Topics

• New Features, page 2

• Changes in Functionality, page 4

• Deprecated and Removed Features, page 5

• Migration and Compatibility, page 6

• Closed Issues, page 7

• Known Issues, page 9



2 | Release Notes

New Features

The following new features have been added to version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP.

Support for Fault Tolerance

This release adds support for fault tolerance.

Support for JMS Compression

For the Request-Response Invocation and the Request-Response Services, the JMS request and the JMS reply messages can be compressed.

Support for TID Management for Inbound Adapter Services

TID Management guarantees that no transactional data is duplicated in the case of communication errors occured between the adapter and the SAP system. This feature is available for the Request-Response Service with one-way invocation configured and the Subscription Service.

Support for IDoc Confirmation for Subscription Service

For the Subscription Service with the tRFC protocol, once the SAP system receives an IDoc, the adapter publishes an IDoc confirmation message report. This message report includes the IDoc number and status.

Support for Message Confirmation for Request-Response Service

Once the SAP system receives a message, the adapter publishes a confirmation message report. This feature is available for the Request-Response Service with one-way invocation configured.

Support for Automatic Commit

For the Request-Response Service, when the transaction or the logical unit of work in the SAP system consists of only one RFC/BAPI call, the adapter automatically commits this RFC/BAPI call.


New Features | 3

Support for IDocFormat Publish Mode

For the Publication and the Subscription Services, you can use this publish mode to exchange the IDoc data without the IDoc metadata. When using JMS as the transport protocol, the IDoc control records are published as JMS properties.

Support for New Languages

The adapter supports the following languages: Catalan, Icelandic, Serbian Latin, Serbian, and Slovenian.

Support for SNC SSO Cookie and X.509 Authentication

The adapter supports SNC SSO Cookie and X.509 authentication for client connections.

Support for New Platforms

The adapter supports the following platforms: Windows Server 2012, Windows Server 2012 R2, Solaris 11 x86, and Solaris 11 SPARC.


4 | Release Notes

Changes in Functionality

The following are changes in functionality in version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP:

Client Connection

The following changes are made in the configuration of the client connection:

• When you create a new client connection, the value of the code page is not specified based on the logon language, and set to null by default.

• No password is required for the SNC client connection.


Deprecated and Removed Features | 5

Deprecated and Removed Features

The following tables list any features that have been deprecated or removed for version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP.

For deprecated features, if relevant, useful alternatives to the deprecated features are listed. Any use of a deprecated feature should be discontinued as it may be removed in a future release. You should avoid becoming dependent on deprecated features and become familiar with the suggested alternative features.

Deprecated Features

Removed Features

Affected Component Description Deprecated in Release

The Publication and the Subscription Services

The None mode for the Publication and the Subscription Services is deprecated.

You can use IDocFormat mode instead.

7.1.0

Affected Component Description Deprecated in Release

Removed in Release

The Publication and the Subscription Services

The 10xCIF, the 10xBatched, and the 10xBatchedNL publish modes for Publication and the Subscription Services are removed.

7.0.0 7.1.0


6 | Release Notes

Migration and Compatibility

The following are instructions on how to migrate from a previous release to version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP.

This section provides information about compatibility of the adapter and its data migration support for other TIBCO applications.

The configuration in earlier release, that is not supported in version 7.1.0, is ignored during migration and not used by the adapter.

The following migration processes are specific to the projects in TIBCO designer.

For how to migrate a project in TIBCO Business Studio, see the TIBCO ActiveMatrix Adapter Framework documentation.

Migrating from 6.2.x/7.0.0 to 7.1.0When you migrate projects to this release from versions 6.2.x or 7.0.0, note the following points:

• TIBCO ActiveMatrix Adapter for SAP 7.1.0 can co-exist in the same TIBCO Administrator domain as TIBCO ActiveMatrix Adapter for SAP 6.2.x or 7.0.0, where the domain can either be ISO8859-1 or UTF-8.

• Migrate existing projects using the command-line migration tool or TIBCO Designer. It is recommended that you use the command-line migration tool for migrating existing projects. For more information, see “Migrating an Adapter Project” in TIBCO ActiveMatrix Adapter for SAP Configuration and Deployment.

Migrating from 6.1.0 and EarlierWhen you migrate projects from a release earlier than 6.2.0, first you have to migrate the projects to the 6.2.1 or 7.0.0 release.

Make a backup copy of the project before starting the migration process.


Closed Issues | 7

Closed Issues

The table lists closed issues in version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP.

Table 4 Closed Issues

Key Summary

ASAP-3444 When the SAP system received the IDoc from the Subscription Service, this service did not confirm the transaction (TID) occasionally, which resulted in unconfirmed entries stored in the ARFCRSTATE table in SAP system.

ASAP-3392 When the name of a RFC table component in parent structure was the same as the one in child structure, the adapter did not fetch the RFC in TIBCO Designer.

ASAP-3014 An error occured when using the Request-Response Service to invoke one of the following SAP function modules:

• IDOC_INBOUND_ASYNCHRONOUS

• IDOC_INBOUND_IN_QUEUE

• INBOUND_IDOC_PROCESS

ASAP-2970 When the Request-Response Service with one-way invocation configured sent a request to the SAP system , if an error occurred in the SAP system, this request was not saved to the LogRFC destination.

ASAP-2912 When multiple Publication Services and Subscription Services existed in a project, if these services used different destinations for error logging, the configuration for the project was not saved correctly.

ASAP-2906 When you created a new project from an existing DAT file, the threadCount property was set to 1 automatically.

ASAP-2711 When the adapter invoked an Inbound adapter service using a dynamic connection, two connections were opened in the SAP system.

ASAP-2488 If the parameters of a RFC referred to a nested type and the type name was same as the RFC name, the RFC Schema was not displayed correctly in TIBCO Designer.


8 | Release Notes

ASAP-2427 When you configured the Request-Response Service as one-way invocation, the following functionalities were not supported:

• TID Management: Local and Remote

• Confirmation/Reporting

ASAP-2425 The Subscription Service did not support the following functionalities:

• TID Management: Local and Remote

• Confirmation/Reporting

Table 4 Closed Issues (Cont’d)

Key Summary


Known Issues | 9

Known Issues

The table lists known issues in version 7.1.0 of TIBCO ActiveMatrix Adapter for SAP.

Table 5 Known Issues (Sheet 1 of 4)

Key Summary/Workaround

ASAP-3671 Summary: An error occurs when using the Request-Response Invocation Service to invoke an RFC/BAPI, if the RFC/BAPI contains an IMPORT, EXPORT, or CHANGING parameter that part of the parameter schema refers to a table type, and the corresponding line type of the table type refers to a domain, data element, or predefined data element.

Workaround: Use a structure as the line type instead.

ASAP-3659 Summary: The Outbound bgRFC of type T does not work.

Workaround: Use the tRFC or the qRFC instead.

ASAP-3562 Summary: The valid durable name of the JMS topic subscriber endpoint at run time is not the one specified at design time, but the one generated by the SDK adapter.

Workaround: None.

ASAP-3007 Summary: For Inbound services, the qRFC property, qCount, does not work.

Workaround: The SAP system assigns the qCount property when the message is received. Ensure that the message is sent to the adapter in the required order and that the number of threads per Inbound adapter service is one.

ASAP-2969 Summary: When using the command-line migration tool to migrate a project to TIBCO ActiveMatrix Adapter for SAP 7.1.0, the product classes are not migrated.

Workaround: After migrating a project by using the command-line tool, you have to open and save the project in TIBCO Designer, and then the product classes are migrated automatically.


10 | Release Notes

ASAP-2895 Summary: If you start the adapter when the network connection is broken or the connection to the SAP system is unavailable, the adapter takes considerable time to reconnect to the SAP system.

Workaround:

• For an Outbound adapter, specify the maxRetryInterval property with a larger value.

• For an Inbound adapter, specify the maxAttempts property with a larger value.

ASAP-2894 Summary: The support for Decfloat16 and Decfloat34 is up to 15 characters and 31 characters respectively.

Workaround: None.

ASAP-2884 Summary: When the adapter is stopped during startup initialization, the log in the console window is incomplete.

Workaround: Use the log file available in the TIB_ADR3_HOME /logs directory to check the complete adapter logging information.

ASAP-2877 Summary: The time when the next server connection check takes place provide by the adapter does not reflect the actual time.

Workaround: None.

ASAP-2840 Summary: An error occurs when using the migration tool to migrate mutiple projects by using the -projectdir option.

Workaround: Migrate each project separately by using the -projectfile option.

ASAP-2816 Summary: When running the Inbound adapter on a Red Hat Enterprise Linux Server 6.x, if the transport type of the adapter service is Rendezvous, the adapter crashes.

Workaround: In the TRA file of the adapter, set the tibco.env_STD_CP_EXT property to Rendezvous_HOME\lib\tibrv.jar.




Known Issues | 11

ASAP-2801 Summary: When using the qRFC protocol to invoke an RFC transaction in an Outbound adapter service, if a message is published subsequently, the following properties are not populated in the RFCClosure class:

• bQueue

• qName

• qCount

Workaround: None.

ASAP-2732 Summary: When using Rendezvous transport between a Request-Response Invocation Service and a Request-Response Service in a TIBCO ActiveMatrix BusinessWorks 5 process, if the schema of the operation containsa reference to the Binary data type, the corresponding request data from the adapter service is empty and a deserialization error occurs in the process.

Workaround: This issue is related to the TIBCO Rendezvous issue RV-3103. For details about the resolution, see LBN1-EWOQBG on the TIBCO Support website.

ASAP-2492 Summary: When using the SAP transaction SM59 to test the connection between the SAP system and the Outbound adapter, the testing is not displayed in the adapter log.

Workaround: Ensure that the adapter has been started by checking the results of excuting the SAP transaction SM59.

ASAP-2433 Summary: ReadIDocFromFile Plugin for the adapter is not supported.

Workaround: Use TIBCO ActiveMatrix BusinessWorks to replay the IDoc file.

ASAP-2066 Summary: The EAR file created for a project configured with JMS SSL transport does not include the certificates and the identity folders.

Workaround: Add these folders manually when creating the EAR file from the resource. These folders are available in the Resources tab of the Share Archive folder.




12 | Release Notes

ASAP-1231 Summary: When creating an EAR file for a project , if you specify different custom folders for multiple services, the EAR file only can include the first service schema, and an error occurs during starting the adapter.

For example, NodeNotFoundException Node = /tibco/public/class/ae/BBB/basic/IDOCS.

Workaround: Manually add the missing schemas in the Resource Tab of the EAR file and recreate the EAR file.




TIBCO ActiveMatrix Adapter for SAP · † TIBCO ActiveMatrix Adapter for SAP Concepts Read this...

Documents

Transcript of TIBCO ActiveMatrix Adapter for SAP · † TIBCO ActiveMatrix Adapter for SAP Concepts Read this...