Thru Tubing Product Catalogue

2

Contents

Innovative Specialist Solutions 3

Service Offering 3

Core Values 4

DEPLOYMENT

External Dimple-On Connector 6

Slip Type Coiled Tubing Connector 7

Dimple-On Connector 8

Motorhead Assembly 9

Hydraulic Disconnect 10

Torque Thru Quick Connect 11

Stabiliser Assembly 12

Jetting Nozzle 13

Rotating Wash Tool 14

Venturi Jet Junk Basket 15

Swivel Assembly 16

Torque/Flow Thru Knuckle Joint 17

Dual Flapper Check Valve 18

Dual Circulating Sub 19

Downhole Filter Sub 20

FISHING

Set Down Rotating Tool 22

Flow Release Pulling Tool (GS) 23

Flow Release External Pulling Tool (JDC) 24

Flow Release Slick Catch Overshot 25

Flow Release Spear 26

Series 150 Overshot 27

Hydraulic Jar 28

Hydraulic Intensifier 29

Wireline Grab and Spear 30

ROTATIONAL

PRO Torque Downhole Motor 32

Downhole Mill 33

Washover Shoe 3 34

SPECIALIST / SEVERANCE

Annular Flow Tool 36

Hydraulic Shifting Tool 37

I-Stroke Impact Hammer 38

Hydraulic Pipe Cutter 39

Hydraulic Tubing Anchor 40

SURFACE

SafeTorqCT™ 42

Mini Tong 43

Hydraulic C-Plate 44

Dart and Ball 45

THRU TUBING INFLATABLE

Permanent Inflatable Bridge Plug (TT-PIBP) 47

Retrievable Inflatable Bridge Plug (TT-RIBP) 48

ST Range of Testing Tools 49

Multi Set Injection Packer System (MSIPS) 51

Single Set Treatment Packer (SSTP) 53

CONVENTIONAL INFLATABLE

Remedial Cementing Packer (RCP) 55

Casing Integrity Test Tool (CITT) 56

Inflatable Casing Packer (ICP) 57

Large Diameter Plug & Abandonment Packers 58

Permanent Inflatable Bridge Plug (PIBP) 59

Retrievable Inflatable Bridge Plug (RIBP) 60

Production Injection Packer (PIP) 61

Innovative Specialist Solutions

Service Offering

At Wellpro Group we supply industry leading Thru Tubing, Inflatable Packer and Well Intervention capabilities along with best in class response service and response.

3

TechnologyTeam of proven innovators delivering new technology solutions and solving bespoke engineering challenges.

Responsive R&M and Design In-house design support by experienced engineers for solving field and operational challenges along with bespoke tool and inflatable element design.

Geographic coverageUK Centre of excellence with global credentials and capability to support and service all product line portfolios in the Eastern Hemisphere.

Expert TeamsLed by recognised industry experts in Well Intervention along with highly qualified, competent and experienced field personnel.

Tool PortfolioFleet of modern, expertly maintained Well Intervention with a broad service capability and responsive delivery. Being Independent allows us access to the best and most innovative well intervention technologies available on the market.

Service CapabilityRecognised industry experienced teams capable of supporting all Well Intervention operations along with any general intervention services.

Wellpro Group provide a complete Thru Tubing, Inflatable Packer and Well Intervention Technology portfolio including operational design, project management, service, rental and sales.

Operations cover fishing, milling and severance along with a wide range of inflatable and well intervention technology including well isolation, well abandonment, well surveillance and monitoring.

The directors of the company are industry leaders with proven track records having worked globally for major service companies, operators and previously owned similar businesses. Our focus is on providing a dedicated and responsive service along with industry leading tooling and technologies covering all intervention service portfolios.

In addition, we can also provide bespoke tool and element design coupled with engineering and manufacturing capabilities for challenging and non-routine operations. The extensive long-term experience, knowledge and intervention expertise of the Wellpro Group team is further strengthened with in-house design engineers thus achieving and maintaining the highest level of customer service and quality.

4

Core ValuesIntegrityWellpro Group perform all services and engage clients with the highest integrity and best advice thus building lasting relationships.

Accountability & CollaborationWellpro Group will support our clients with operational and engineeringdesign and support to become a trusted and respected supplier.

Pursuit Of ExcellenceEverything we do will be to assist our clients in meeting their objective, providing the highest quality in a responsive, efficient and cost effective way.

PassionThru Tubing, Inflatable and Well Intervention services and the provision of quality tools and services are our passion. We strive to advance the industry capability and ensure leading service quality.

Mutual RespectOur workforce brings expertise and experience from all backgrounds with thesingle vision of providing the best and most complete Thru Tubing, Inflatable and Well Intervention service offering.

Our VisionTo be recognised as market experts in the provision and execution of Thru Tubing, Inflatable & Well Intervention products & services.

Our MissionWellpro Group shall perform its services and client interactions with the highest integrity based on building lasting relationships with honesty and trust.

4 5

Deployment

External Dimple-On Connector

The Wellpro Group External Dimple-On Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. The connector is constructed from a robust and cost-effective one-piece design.

The coiled tubing is dimpled using the purpose designed dimpling tool that also incorporates a slide hammer mechanism for installation and removal. The connector is then installed and held in place with locking grub screws inserted and tightened through the connector body into recessed profiles.

The design also features dual O-ring seals to provide a reliable seal against the OD of the coiled tubing. This design allows for superior mechanical strength also enabling torque-through capability.

The External Dimple-On Connector can be manufactured and designed to suit customer OD’s and thread requirements.

Specifications and features• Available in a range of sizes to suit industry standard Coiled Tubing diameters and BHA’s• Two O-ring grooves provide added security in high-pressure applications• Dimple design provides torque-through capabilities• Ease of installation, one-piece reusable, robust and cost-effective design• Provides superior mechanical strength

[email protected] | wellprogroup.com© 2020 Wellpro Group Ltd. All rights reserved.

The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional sizes, end connections and materials available upon request.

Coil Tubing OD (in) 1.500 1.750 2.000 2.375Connector OD (in) 2.00 2.125 2.875 2.875End Connection 1” or 1-1/4” AMMT 1-1/2” AMMT 2-3/8" PAC 2-3/8" PACID (in) 0.675 – 0.750 1.000 1.375 1.375Length (ft) 0.83 0.83 0.83 0.83

Slip Type Coiled Tubing Connector

The Wellpro Group Slip Type Coiled Tubing Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. Applied tensile load increases the grapples ‘grip’ on the OD of the coiled tubing ensuring full tensile strength capability at all times.

The connector design provides an uninterrupted bore for drop ball operations and includes anti-rotational screws.

The dressed coil is simply stabbed into the connector and tightened. An overpull is applied to set the slip and then retightened with anti-rotational screws fitted to prevent the coil tubing rotating inside the connector.

Specifications and features• Robust external grapple design• Uninterrupted bore for drop ball operations• Slip ensures the axial load is transferred into the coil tubing thus increasing the strength of the connector grip• Dual elastomeric seals• Suitable for heavy duty jarring and motor applications• Quick and easy assembly• Anti-rotation screws prevent connector rotation once assembled

The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional tool sizes and connection variations are available upon request.

Tool Size (in) 1.75 2.125 2.250 2.875 2.875 3.125Coil Size (in) 1-1/4" 1-1/2" 1-3/4" 1-3/4" 2" 2-3/8"End Connection 1-1/4" AMMT 1-1/2" AMMT 1-1/2" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACTensile Strength - Standard (lbs) 42,000 62,300 53,800 150,100 110,800 136,700Tensile Strength - H2S (lbs) 30,500 45,300 39,100 109,100 80,500 99,400ID (in) 0.750 1.000 1.000 1.375 1.375 1.375Working Pressure (psi) 10,000 10,000 10,000 10,000 10,000 10,000

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved.6

External Dimple-On Connector

The Wellpro Group External Dimple-On Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. The connector is constructed from a robust and cost-effective one-piece design.

The coiled tubing is dimpled using the purpose designed dimpling tool that also incorporates a slide hammer mechanism for installation and removal. The connector is then installed and held in place with locking grub screws inserted and tightened through the connector body into recessed profiles.

The design also features dual O-ring seals to provide a reliable seal against the OD of the coiled tubing. This design allows for superior mechanical strength also enabling torque-through capability.

The External Dimple-On Connector can be manufactured and designed to suit customer OD’s and thread requirements.

Specifications and features• Available in a range of sizes to suit industry standard Coiled Tubing diameters and BHA’s• Two O-ring grooves provide added security in high-pressure applications• Dimple design provides torque-through capabilities• Ease of installation, one-piece reusable, robust and cost-effective design• Provides superior mechanical strength


The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional sizes, end connections and materials available upon request.

Coil Tubing OD (in) 1.500 1.750 2.000 2.375Connector OD (in) 2.00 2.125 2.875 2.875End Connection 1” or 1-1/4” AMMT 1-1/2” AMMT 2-3/8" PAC 2-3/8" PACID (in) 0.675 – 0.750 1.000 1.375 1.375Length (ft) 0.83 0.83 0.83 0.83

Slip Type Coiled Tubing Connector

The Wellpro Group Slip Type Coiled Tubing Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. Applied tensile load increases the grapples ‘grip’ on the OD of the coiled tubing ensuring full tensile strength capability at all times.

The connector design provides an uninterrupted bore for drop ball operations and includes anti-rotational screws.

The dressed coil is simply stabbed into the connector and tightened. An overpull is applied to set the slip and then retightened with anti-rotational screws fitted to prevent the coil tubing rotating inside the connector.

Specifications and features• Robust external grapple design• Uninterrupted bore for drop ball operations• Slip ensures the axial load is transferred into the coil tubing thus increasing the strength of the connector grip• Dual elastomeric seals• Suitable for heavy duty jarring and motor applications• Quick and easy assembly• Anti-rotation screws prevent connector rotation once assembled


Tool Size (in) 1.75 2.125 2.250 2.875 2.875 3.125Coil Size (in) 1-1/4" 1-1/2" 1-3/4" 1-3/4" 2" 2-3/8"End Connection 1-1/4" AMMT 1-1/2" AMMT 1-1/2" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACTensile Strength - Standard (lbs) 42,000 62,300 53,800 150,100 110,800 136,700Tensile Strength - H2S (lbs) 30,500 45,300 39,100 109,100 80,500 99,400ID (in) 0.750 1.000 1.000 1.375 1.375 1.375Working Pressure (psi) 10,000 10,000 10,000 10,000 10,000 10,000

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved.6 7

Dimple-On Connector

The Wellpro Group Dimple-On Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. The connector is constructed in a robust and cost-effective one-piece design.

The coiled tubing is dimpled onto the connector using the purpose designed dimpling tool. The design also features dual O-ring seals to provide a reliable seal against the ID of the coiled tubing after reaming. The design allows for superior mechanical strength also enabling high torque-through capability.

The Dimple-On Connector can be manufactured and designed to suit all coil tubing and thread requirements.

Specifications and features• Two O-ring grooves provide added security in high-pressure applications• Dimple design provides torque-through capabilities• One-piece reusable, robust and cost-effective• Provides superior mechanical strength• Available in sizes 1-1/4 inches to 2-7/8 inches• Available to suit any combination of coil tubing or specially cut to customer requirements


Coil Tubing OD (in) 1.25 1.50 1.75 2.00 2.375 2.875Wall Thickness On Request On Request On Request On Request On Request On RequestOD in inches On Request On Request On Request On Request On Request On RequestEnd Connection 1" AMMT 1-1/4" AMMT 1-1/4" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACID (in) 0.500 0.688 0.750 1.000 1.000 1.375Tensile Strength (lbs) 50,160 57,860 77,305 107,910 143,990 245,931Length (ft) 0.67 0.67 0.67 0.67 0.67 0.67Working Pressure (psi) 10,000 10,000 10,000 10,000 10,000 10,000

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved. 88

Motorhead Assembly


Tool Size (in) 1.688 1.750 2.125 2.875End Connection 1” AMMT 1-1/4” AMMT 1-1/2” AMMT 2-3/8” PACTensile Strength (lbs) 33,860 47,000 62,000 120,300Torsional Yield (ft/lbs) 530 720 1300 3100ID (in) 0.406 0.406 0.563 0.688Length (ft) 2.30 2.21 2.38 2.73Disconnect Drop Ball (in) 0.500 0.500 0.750 0.875Circulation Drop Ball (in) 0.438 0.438 0.625 0.750Fish Neck Size 1-1/2” GS 1-1/2” GS 2” GS 3” GSWorking Pressure (psi) 10,000 10,000 10,000 10,000

The Wellpro Group Motorhead Assembly is a compact design that combines three industry standard running string components including dual flapper check valves, ball activated disconnect and dual circulating sub. In addition, the disconnect has torque through capability.

The dual flapper check valves provide directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing.

The disconnect facility provides a means of disconnecting by simply dropping a ball from surface and applying pressure. After disconnection a standard internal GS profile allows for subsequent retrieval.

The circulating sub is ball activated and, when utilised, introduces a flow path from the tool ID to the annulus thus allowing for higher circulation rates. If, for any reason, circulation through the tool string is lost, a rupture disc option is also included as standard. This can be set and ruptured at a predetermined pressure.

Specifications and features• Impact, shock loading, torque and straight pull tolerant design• Adjustable shear pin rating on disconnect and circulation sub• Ball activated disconnect facility with surface pressure indication of successful activation• Variable ball seat sizes• Dual operation circulating sub• Rupture disk facility• Standard internal GS profile


Dimple-On Connector

The Wellpro Group Dimple-On Connector provides a reliable means of connecting the bottom hole assembly to the coiled tubing. The connector is constructed in a robust and cost-effective one-piece design.

The coiled tubing is dimpled onto the connector using the purpose designed dimpling tool. The design also features dual O-ring seals to provide a reliable seal against the ID of the coiled tubing after reaming. The design allows for superior mechanical strength also enabling high torque-through capability.

The Dimple-On Connector can be manufactured and designed to suit all coil tubing and thread requirements.

Specifications and features• Two O-ring grooves provide added security in high-pressure applications• Dimple design provides torque-through capabilities• One-piece reusable, robust and cost-effective• Provides superior mechanical strength• Available in sizes 1-1/4 inches to 2-7/8 inches• Available to suit any combination of coil tubing or specially cut to customer requirements


Coil Tubing OD (in) 1.25 1.50 1.75 2.00 2.375 2.875Wall Thickness On Request On Request On Request On Request On Request On RequestOD in inches On Request On Request On Request On Request On Request On RequestEnd Connection 1" AMMT 1-1/4" AMMT 1-1/4" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACID (in) 0.500 0.688 0.750 1.000 1.000 1.375Tensile Strength (lbs) 50,160 57,860 77,305 107,910 143,990 245,931Length (ft) 0.67 0.67 0.67 0.67 0.67 0.67Working Pressure (psi) 10,000 10,000 10,000 10,000 10,000 10,000

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved. 8 9

Motorhead Assembly


Tool Size (in) 1.688 1.750 2.125 2.875End Connection 1” AMMT 1-1/4” AMMT 1-1/2” AMMT 2-3/8” PACTensile Strength (lbs) 33,860 47,000 62,000 120,300Torsional Yield (ft/lbs) 530 720 1300 3100ID (in) 0.406 0.406 0.563 0.688Length (ft) 2.30 2.21 2.38 2.73Disconnect Drop Ball (in) 0.500 0.500 0.750 0.875Circulation Drop Ball (in) 0.438 0.438 0.625 0.750Fish Neck Size 1-1/2” GS 1-1/2” GS 2” GS 3” GSWorking Pressure (psi) 10,000 10,000 10,000 10,000

The Wellpro Group Motorhead Assembly is a compact design that combines three industry standard running string components including dual flapper check valves, ball activated disconnect and dual circulating sub. In addition, the disconnect has torque through capability.

The dual flapper check valves provide directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing.



Specifications and features• Impact, shock loading, torque and straight pull tolerant design• Adjustable shear pin rating on disconnect and circulation sub• Ball activated disconnect facility with surface pressure indication of successful activation• Variable ball seat sizes• Dual operation circulating sub• Rupture disk facility• Standard internal GS profile


10

Hydraulic Disconnect


Tool Size (in) 1.688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 33,860 62,000 120,300 120,300Torsional Yield (ft/lbs) 570 1300 3100 3100Ball Seat ID (in) 0.344 0.469 0.560 0.655Length (ft) 1.44 1.60 1.86 1.86Drop Ball Size (in) 0.375 0.500 0.625 0.688Fish Neck Size 1-1/2” GS 2” GS 3” GS 3” GSWorking Pressure (psi) 10,000 10,000 10,000 10,000

The Wellpro Group Hydraulic Disconnect is an extremely robust torque through drop ball disconnect. The disconnect can handle straight pull, impact, jarring and torque loads without affecting the release mechanism.



Specifications and features• This tool is designed to operate below jars or impact hammers and during milling operations• Impact, shock loading, torque and straight pull tolerant design• Adjustable shear pin rating on disconnect • Ball activated disconnect facility with surface pressure indication of successful activation• Rupture disk facility• Variable ball seat sizes• Standard internal GS profile


Torque Thru Quick Connect


The Wellpro Group Torque Thru Quick Connect allows for easy toolstring makeup, especially in applications where it is difficult to rotate the toolstring to engage threads. This design can withstand the force of milling and jarring and is particularly well suited for long BHA make-up

The Torque Thru Quick Connector locking taper feature allows each section of the tool string to simply stab in and centralise whilst engaging torque thru castellations.

The primary locking collar is then screwed down to lock the two sections together. The secondary locking collar can then be screwed down to secure the joint and prevent the primary collar from back off.

Features• Eliminates issues of connecting the BHA when there is no means of rotation• Suited for the deployment of long BHA• Superior strength & bi-directional torque capability• Ideal for BHA make-up and for deployment operations• Simple robust design

[email protected] | wellprogroup.com

Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1-1/2" AMMT 2-3/8" PAC Tensile Strength (lbs) 30,000 86,200 105,000ID (in) 0.560 0.875 1.000Length (ft) 1.54 1.58 1.60Working Pressure (psi) 10,000 10,000 10,000

© 2019 Wellpro Group Ltd. All rights reserved.

10 11

Hydraulic Disconnect


Tool Size (in) 1.688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 33,860 62,000 120,300 120,300Torsional Yield (ft/lbs) 570 1300 3100 3100Ball Seat ID (in) 0.344 0.469 0.560 0.655Length (ft) 1.44 1.60 1.86 1.86Drop Ball Size (in) 0.375 0.500 0.625 0.688Fish Neck Size 1-1/2” GS 2” GS 3” GS 3” GSWorking Pressure (psi) 10,000 10,000 10,000 10,000

The Wellpro Group Hydraulic Disconnect is an extremely robust torque through drop ball disconnect. The disconnect can handle straight pull, impact, jarring and torque loads without affecting the release mechanism.



Specifications and features• This tool is designed to operate below jars or impact hammers and during milling operations• Impact, shock loading, torque and straight pull tolerant design• Adjustable shear pin rating on disconnect • Ball activated disconnect facility with surface pressure indication of successful activation• Rupture disk facility• Variable ball seat sizes• Standard internal GS profile


Torque Thru Quick Connect


The Wellpro Group Torque Thru Quick Connect allows for easy toolstring makeup, especially in applications where it is difficult to rotate the toolstring to engage threads. This design can withstand the force of milling and jarring and is particularly well suited for long BHA make-up

The Torque Thru Quick Connector locking taper feature allows each section of the tool string to simply stab in and centralise whilst engaging torque thru castellations.

The primary locking collar is then screwed down to lock the two sections together. The secondary locking collar can then be screwed down to secure the joint and prevent the primary collar from back off.

Features• Eliminates issues of connecting the BHA when there is no means of rotation• Suited for the deployment of long BHA• Superior strength & bi-directional torque capability• Ideal for BHA make-up and for deployment operations• Simple robust design


Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1-1/2" AMMT 2-3/8" PAC Tensile Strength (lbs) 30,000 86,200 105,000ID (in) 0.560 0.875 1.000Length (ft) 1.54 1.58 1.60Working Pressure (psi) 10,000 10,000 10,000

© 2019 Wellpro Group Ltd. All rights reserved. 11

Jetting Nozzle

The Wellpro Group Jetting Nozzle range is available in various designs and diameters along with many standard and bespoke connections.

The multi-port and variable nozzle are designed to give full radial coverage of the wellbore tubular during well intervention operations. The porting can be manufactured in any combination of up, down or side jetting with port sizes to match the optimum performance for each nozzle. The holes can also accommodate hardened nozzles or blank plugs.

The single ported through bore nozzle is primarily designed for the placement of cement slurry.

The upward jetting nozzle is primarily designed for rear jetting operations but can also be utilised for nitrogen lifting operations.

Specifications and features• Porting can be manufactured in any combination• Can be fitted with tungsten carbide or carbon steel orifice nozzles• Multi-port nozzle giving full radial coverage of the wellbore tubular• Flexibility to use or blank off specific ports• Backward, side, downward or multiple jetting configurations available

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved.12

Stabiliser Assembly

The Wellpro Group Stabiliser is designed to be part of the bottom hole assembly in order to provide centralisation of tools during operations.

The Sleeved Stabiliser has a main mandrel that allows for interchangeable sleeves to be attached. The tool also allows the BHA to rotate whilst being supported by the external flutes, thus eliminating possible wear.

The Fixed Blade Stabiliser is of one piece construction and ideally suited for all milling and workover applications.

Specifications and features• Sleeved Stabiliser body can accommodate a range of stabiliser sleeve diameters• Fixed Blade Stabiliser manufactured in solid one piece for strength and durability• Full through bore for drop ball passage



Tool Size (In) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACSS Tensile Strength (lbs) 42,000 62,305 184,500FB Tensile Strength (lbs) 57,217 70,650 239,100ID (in) 0.50 1.00 1.38Length (ft) 1.42 2.08 1.83Working Pressure (psi) 10,000 10,000 10,000


Jetting Nozzle

The Wellpro Group Jetting Nozzle range is available in various designs and diameters along with many standard and bespoke connections.

The multi-port and variable nozzle are designed to give full radial coverage of the wellbore tubular during well intervention operations. The porting can be manufactured in any combination of up, down or side jetting with port sizes to match the optimum performance for each nozzle. The holes can also accommodate hardened nozzles or blank plugs.

The single ported through bore nozzle is primarily designed for the placement of cement slurry.

The upward jetting nozzle is primarily designed for rear jetting operations but can also be utilised for nitrogen lifting operations.

Specifications and features• Porting can be manufactured in any combination• Can be fitted with tungsten carbide or carbon steel orifice nozzles• Multi-port nozzle giving full radial coverage of the wellbore tubular• Flexibility to use or blank off specific ports• Backward, side, downward or multiple jetting configurations available

[email protected] | wellprogroup.com© 2019 Wellpro Group Ltd. All rights reserved.12 13

Stabiliser Assembly

The Wellpro Group Stabiliser is designed to be part of the bottom hole assembly in order to provide centralisation of tools during operations.

The Sleeved Stabiliser has a main mandrel that allows for interchangeable sleeves to be attached. The tool also allows the BHA to rotate whilst being supported by the external flutes, thus eliminating possible wear.

The Fixed Blade Stabiliser is of one piece construction and ideally suited for all milling and workover applications.

Specifications and features• Sleeved Stabiliser body can accommodate a range of stabiliser sleeve diameters• Fixed Blade Stabiliser manufactured in solid one piece for strength and durability• Full through bore for drop ball passage



Tool Size (In) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACSS Tensile Strength (lbs) 42,000 62,305 184,500FB Tensile Strength (lbs) 57,217 70,650 239,100ID (in) 0.50 1.00 1.38Length (ft) 1.42 2.08 1.83Working Pressure (psi) 10,000 10,000 10,000


Rotating Wash Tool

The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional tool sizes and connection variations may be available upon request.

The Wellpro Group Rotating Wash Tool provides a reliable self-rotating high-pressure jetting action for wellbore tubulars.

Impact time and rotational speed is controlled by the viscous fluid governor. This maximises jet power being delivered to the tubing wall by using only a few rotating jets resulting in hard impact force. The replaceable jets are highly efficient in removal of downhole debris including bridges, cleaning recesses and irregular surfaces without damaging the wellbore tubulars.

The tool can also be used with two phase fluid at temperatures up to 200°C.

Nozzle configuration and sizes are designed to suit specific applications by utilising the latest flow modelling software.

Specifications and features• Simple self-rotating high-pressure jetting action for wellbore tubular cleaning• Compatible with acids and other corrosive fluids• Long lasting carbide nozzles from 0.090-inches – 0.155-inches available


Model SC-168 SC-212 SC-250 SC-287Pressure (psi) 5,000 5,000 5,000 5,000Flow Range (Bpm) 0.7 - 1.3 0.5 – 2.5 0.7 - 3.0 1.0 - 3.0 Outside Dia.(in) 1.68 2.12 2.50 2.875 Length (in) 9.8 12.3 16.0 15.6 Connection 1” AMMT 1-1/2” AMMT 1-1/2” AMMT 2-3/8” PACRotation Speed (rpm) 150-200 150-200 80-150 80-150 PSI Loss @ 1bpm 330 83 31 31Max Temp © 200 200 200 200


Venturi Jet Junk Basket


Tool Size (in) 1,688 2.063 2.625 3.125End Connection External 1" AMMT 1 - 1/2" AMMT 1 - 1/2” AMMT 2 - 3/8" PACConnection Internal 1-11/16” CWP 2 - 1/16" CWP 2 - 5/8" CWP 3 - 1/8" CWPTensile Strength (lbs) 67,555 86,833 116,000 141,000Standard Length (ft) 2.80 3.20 3.75 4.200Internal ID (in) 1.031 1.280 1.560 2.030Max Torsional Yield (ft/lbs) 700 1,100 1,800 4,850

The Wellpro Group Venturi Jet Junk Basket is designed to remove debris from the wellbore.

Fluid is pumped down the workstring and out through the tool nozzles creating a vacuum within the tool. Wellbore debris, junk or fill is then vacuumed into the tool and remains trapped between the filter screen and catchers. Various filter screens and catchers can be fitted to recover specific sizes of debris, junk or fill.

The tool nozzles are adjustable and easily changed to alter the flow rate and pressure differentials to suit individual applications. Larger sized extensions can also be fitted to recover larger volumes/sizes of debris if required.

The Venturi Jet Junk Basket can be run with a motor and washover shoe for specific operations where rotation is required.

An important feature of the Venturi is that it is not dependent on the hole size to work efficiently.

Specifications and features• Cleans wellbore of junk and debris• Retains debris from falling back into wellbore• Catches large sized debris that is difficult to circulate outs• Debris chamber may be enlarged by adding debris chambers• Optional internal magnet to collect metallic debris• Tool can be motorised when rotation is required


Swivel Assembly


The Wellpro Group Pump Thru Swivel allows for easy tool-string makeup at surface and for downhole orientation of the BHA.

As standard, the pump thru swivel includes self-lubricating, oil-impregnated bearings. The simple design ensures full integrity of flow through the joint.

Specifications and features• Allows BHA to rotate freely • Simple and robust design ensures full integrity of flow through the joint• Operates under tensile or compressive loads


Tool Size (in) 1.750 2.125 2.875 3.125End Connection 1” or 1-1/4" AMMT 1-1/2" AMMT 2-3/8" PAC 2-3/8" PACTensile Strength (lbs) 35,000 37,000 100,000 122,000ID (in) 0.438 0.500 1.030 1.000Length (ft) 1.05 1.00 1.20 1.20Working Pressure (psi) 5,000 5,000 5,000 5,000


Torque/Flow Thru Knuckle Joint


The Wellpro Group Torque/Flow Thru Knuckle Joint provides additional flexibility allowing the BHA to pass unrestricted through/over tubing crossovers, WEG’s, profiles, high deviation wells and other points where a rigid BHA may encounter difficulty. The tool also has a full 15-degree angular deviation and internal pressure sealing.

The ball and socket of the knuckle have keys that prevent rotation whilst withstanding torque, while still allowing full angular movement.

The tool can also be used in certain fishing applications to help centralise or de-centralise the fishing string.

Specifications and features• Provides additional flexibility in the tool string when positioned above• 15 Deg deflection from centre line• Simple, robust design ensuring ease of operation for the end user• The additional flexibility allows tools to run in restricted or highly deviated wells


Tool Size (in) 1.688 2.125 2.875 3.125End Connection 1" AMMT 1-1/2" AMMT 2-3/8” PAC 2-3/8" PACTensile Strength (lbs) 30,000 40,000 100,000 135,000ID (in) 0.406 0.530 0.750 1.375Length (ft) 1.10 1.00 1.24 1.33Working Pressure (psi) 5,000 5,000 5,000 5,000


18

Dual Flapper Check Valve


The Wellpro Group Dual Flapper Check Valve provides directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing. The tool consists of a two-piece housing assembly containing two removable flapper cartridges. The flappers are spring loaded in the closed position thus allowing no wellbore fluid ingress. They are designed to open fully when required to supply a large, uninterrupted bore through the tool for fluid or drop balls.

Specifications and features• Dual flapper design provides full redundancy for increased safety• The flapper provides a pressure tight barrier in one direction but enables flow in the opposite direction• Designed to open fully to give a large uninterrupted bore through the tool for drop ball activated subs• Two removable flapper cartridges


Tool Size (in) 1.688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 -3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 45,000 77,000 145,000 150,000ID (in) 0.750 0.813 1.030 1.375Length (ft) 1.09 0.98 1.15 1.54Working Pressure (psi) 10,000 10,000 10,000 10,000

18

Dual Circulating Sub


The Wellpro Group Dual Circulating Sub is designed as a circulating component within the BHA.


Specifications and features• Designed as a circulating component within the BHA• Design features include a shear out ball seat coupled with a burst disc• Simple drop ball design to activate• Large circulating flow area to annulus when activated


Tool Size (in) 1,688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 57,217 77,305 245,931 245,931Ball Seat ID (in) 0 .375 0.438 0.563 0.688Drop Ball Size (in) 0.438 0.500 0.625 0.750Length (ft) 0.54 0.54 0.58 1.18Working Pressure (psi) 10,000 10,000 10,000 10,000

19

18

Dual Flapper Check Valve


The Wellpro Group Dual Flapper Check Valve provides directional well control during well intervention operations thus preventing inflow of wellbore fluids to the coil tubing. The tool consists of a two-piece housing assembly containing two removable flapper cartridges. The flappers are spring loaded in the closed position thus allowing no wellbore fluid ingress. They are designed to open fully when required to supply a large, uninterrupted bore through the tool for fluid or drop balls.

Specifications and features• Dual flapper design provides full redundancy for increased safety• The flapper provides a pressure tight barrier in one direction but enables flow in the opposite direction• Designed to open fully to give a large uninterrupted bore through the tool for drop ball activated subs• Two removable flapper cartridges


Tool Size (in) 1.688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 -3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 45,000 77,000 145,000 150,000ID (in) 0.750 0.813 1.030 1.375Length (ft) 1.09 0.98 1.15 1.54Working Pressure (psi) 10,000 10,000 10,000 10,000

Dual Circulating Sub


The Wellpro Group Dual Circulating Sub is designed as a circulating component within the BHA.


Specifications and features• Designed as a circulating component within the BHA• Design features include a shear out ball seat coupled with a burst disc• Simple drop ball design to activate• Large circulating flow area to annulus when activated


Tool Size (in) 1,688 2.125 2.875 3.125End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PACTensile Strength (lbs) 57,217 77,305 245,931 245,931Ball Seat ID (in) 0 .375 0.438 0.563 0.688Drop Ball Size (in) 0.438 0.500 0.625 0.750Length (ft) 0.54 0.54 0.58 1.18Working Pressure (psi) 10,000 10,000 10,000 10,000

19

Downhole Filter Sub

The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional micron sizes, tool sizes and connection variations are available upon request.

The Wellpro Group Downhole Filter minimises the tendency to plug small nozzles, motors and orifices in the downhole tool string.

It will filter particles down to 200 microns, helping to improve equipment life and operations dependability, as well as reducing downtime.

Features and Specifications• Debris restriction from critical BHA components• Reduces downtime due to plugging off


Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 -3/8" PACTensile Strength (lbs) 20,000 124000 145,000Mesh Filter (Micron) 200 200 200Length (ft) 1.25 1.25 1.41

20 21

Downhole Filter Sub

The equipment specifications and information advised in this document are for information only and may be liable to change without notice. Additional micron sizes, tool sizes and connection variations are available upon request.

The Wellpro Group Downhole Filter minimises the tendency to plug small nozzles, motors and orifices in the downhole tool string.

It will filter particles down to 200 microns, helping to improve equipment life and operations dependability, as well as reducing downtime.

Features and Specifications• Debris restriction from critical BHA components• Reduces downtime due to plugging off


Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 -3/8" PACTensile Strength (lbs) 20,000 124000 145,000Mesh Filter (Micron) 200 200 200Length (ft) 1.25 1.25 1.41

21

Fishing

Set Down Rotating Tool


The Wellpro Group Set Down Rotating Tool is a product specifically designed and developed for use in coiled tubing and wireline operations to mechanically induce rotation of components in the work string.

The Set Down Rotating Tool is designed to provide up to (4) full 360 degree revolutions per cycle with rotation initiated when 50 pounds of weight is set down on the tool.

The unrestricted inner diameter permits the passage of drop balls through the Jar to release/activate tools utilised below.

The Set Down Rotating Tool will rotate downhole when a weight of 50 lbs or greater is applied. The tool is reset by lifting it up 12” - it is reset by the internal spring. The tool is ready for rotation once again.

Specifications and features• Provides rotational alignment during fishing operations • Compatible with fishing and jarring operations• Large I.D. of the rotating tool allows large drop ball facility• Rotates an overshot onto a “Fish”


Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.562 0.625 0.812Length (Open) (ft) 2.91 3.50 3.91Tensile Strength (lbs) 64,000 68,000 88,000Max Overpull (lbs) 15,000 30,000 40,000Max Temperature (F) 500 500 500


Flow Release Pulling Tool (GS)


Tool Size (in) 1-1/2" GS 2" GS 2-1/2" GS 3" GS 3-1/2" GSEnd Connection 1" AMMT 1-1/4" AMMT 1-1/2" AMMT 2-3/8" PAC 2-3/8" PACTensile Strength (lbs) 30,000 42,000 53,100 72,000 102,000Length (ft) 1.02 1.31 1.28 1.46 1.69Max Working Pressure (psi) 5,000 5,000 5,000 5,000 5,000

The Wellpro Group Flow Release Pulling Tool (GS) is a reliable and cost effective means of retrieving tools with an internal ‘GS’ style fishing neck.

The tool can be utilised by setting down weight to engage fish allowing the weight applied to the tool to overcome the internal spring force. To release the overshot from the fish simply apply down weight on the BHA while circulating at a pre-determined flow rate through the tool.

The tool can also be operated by circulating at a pre-determined flow rate through an adjustable orifice. This creates an internal pressure that activates an unbalanced piston allowing the spear grapple to become de-supported prior to entering the fish. This method also allows for jetting to clean fish area.

Specifications and features• Hydraulically activated• High strength for jarring operations• Means of engaging, locating and pulling on standard, internal fishing necks • Variety of nozzle sizes to suit specific flow rates and operating parameters• Simple robust design


Set Down Rotating Tool


The Wellpro Group Set Down Rotating Tool is a product specifically designed and developed for use in coiled tubing and wireline operations to mechanically induce rotation of components in the work string.

The Set Down Rotating Tool is designed to provide up to (4) full 360 degree revolutions per cycle with rotation initiated when 50 pounds of weight is set down on the tool.


The Set Down Rotating Tool will rotate downhole when a weight of 50 lbs or greater is applied. The tool is reset by lifting it up 12” - it is reset by the internal spring. The tool is ready for rotation once again.

Specifications and features• Provides rotational alignment during fishing operations • Compatible with fishing and jarring operations• Large I.D. of the rotating tool allows large drop ball facility• Rotates an overshot onto a “Fish”


Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.562 0.625 0.812Length (Open) (ft) 2.91 3.50 3.91Tensile Strength (lbs) 64,000 68,000 88,000Max Overpull (lbs) 15,000 30,000 40,000Max Temperature (F) 500 500 500


Flow Release Pulling Tool (GS)


Tool Size (in) 1-1/2" GS 2" GS 2-1/2" GS 3" GS 3-1/2" GSEnd Connection 1" AMMT 1-1/4" AMMT 1-1/2" AMMT 2-3/8" PAC 2-3/8" PACTensile Strength (lbs) 30,000 42,000 53,100 72,000 102,000Length (ft) 1.02 1.31 1.28 1.46 1.69Max Working Pressure (psi) 5,000 5,000 5,000 5,000 5,000

The Wellpro Group Flow Release Pulling Tool (GS) is a reliable and cost effective means of retrieving tools with an internal ‘GS’ style fishing neck.





24

Flow Release External Pulling Tool (JDC)


The Wellpro Group Flow Release External Pulling Tool (JDC) is a cost-effective means of engaging, latching and manipulating standard, external fishing necks.

The tool can be utilised by setting down weight to engage the external fishing neck allowing the weight applied to the tool to overcome the internal spring force. If the device cannot be recovered using this method, circulation can be initiated allowing flow through a nozzle fitted in the core of the tool. This creates an internal pressure that activates an unbalanced piston thus allowing the catch grapple to become de-supported and allow internal swallow of external fishing neck profile. This method also allows for jetting to clean the fish neck profile.



Tool Size (in) 1.812 2.625 3.000 3.625To suit F/N size 1” to 1.375" 1” to 1.750" 1” to 2.313" 1” to 3.125"Tensile Strength (lbs) 33,000 110,000 76,000 70,000Length (ft) 0.98 1.40 1.35 1.60Working Pressure (psi) 5,000 5,000 5,000 5,000

24

Flow Release Slick Catch Overshot


The Wellpro Group Flow Release Slick Catch Overshot provides a method of engaging and pulling on plain end fish, or other types of equipment, with a slick outside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots.


The tool can also be operated by circulating at a pre-determined flow rate through an adjustable orifice. This creates an internal pressure that activates an unbalanced piston thus allowing the overshot grapple to become de-supported and pass over the fish.

By changing out the grapple each tool size can engage a range of diameters and additionally the flow actuation can also be adjusted by fitting an alternative orifice.

Specifications and features• High tensile strength for jarring operations• Allows operator a means of engaging and pulling slick fish• Each tool size can engage a whole range of diameters by changing the grapple• Hydraulically activated • Large range of catch sizes for each tool


Tool Size (in) 2.250 2.875 3.625 4.375End Connection 1-1/2" AMMT 2-3/8" PAC 2-3/8” PAC 2-3/8” PACTensile Strength (lbs) 59,400 132,000 112,750 128,300Length (ft) 1.58 1.77 1.78 2.00Working Pressure (psi) 5,000 5,000 5,000 5,000

24 25

Flow Release External Pulling Tool (JDC)


The Wellpro Group Flow Release External Pulling Tool (JDC) is a cost-effective means of engaging, latching and manipulating standard, external fishing necks.

The tool can be utilised by setting down weight to engage the external fishing neck allowing the weight applied to the tool to overcome the internal spring force. If the device cannot be recovered using this method, circulation can be initiated allowing flow through a nozzle fitted in the core of the tool. This creates an internal pressure that activates an unbalanced piston thus allowing the catch grapple to become de-supported and allow internal swallow of external fishing neck profile. This method also allows for jetting to clean the fish neck profile.



Tool Size (in) 1.812 2.625 3.000 3.625To suit F/N size 1” to 1.375" 1” to 1.750" 1” to 2.313" 1” to 3.125"Tensile Strength (lbs) 33,000 110,000 76,000 70,000Length (ft) 0.98 1.40 1.35 1.60Working Pressure (psi) 5,000 5,000 5,000 5,000

24

Flow Release Slick Catch Overshot


The Wellpro Group Flow Release Slick Catch Overshot provides a method of engaging and pulling on plain end fish, or other types of equipment, with a slick outside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots.


The tool can also be operated by circulating at a pre-determined flow rate through an adjustable orifice. This creates an internal pressure that activates an unbalanced piston thus allowing the overshot grapple to become de-supported and pass over the fish.

By changing out the grapple each tool size can engage a range of diameters and additionally the flow actuation can also be adjusted by fitting an alternative orifice.

Specifications and features• High tensile strength for jarring operations• Allows operator a means of engaging and pulling slick fish• Each tool size can engage a whole range of diameters by changing the grapple• Hydraulically activated • Large range of catch sizes for each tool


Tool Size (in) 2.250 2.875 3.625 4.375End Connection 1-1/2" AMMT 2-3/8" PAC 2-3/8” PAC 2-3/8” PACTensile Strength (lbs) 59,400 132,000 112,750 128,300Length (ft) 1.58 1.77 1.78 2.00Working Pressure (psi) 5,000 5,000 5,000 5,000

25

Flow Release Spear


The Wellpro Group Flow Release Spear provides a method of engaging and pulling on fish, or other types of equipment, with a slick inside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots.



By changing out the grapple each tool size can engage a range of inside diameters and additionally the flow actuation can also be adjusted by fitting an alternative orifice.

Specifications and features• High tensile strength for jarring operations • Allows operator a means of engaging and pulling slick ID’s• Each tool size can engage a whole range of diameters by changing the grapple • Hydraulically activated • Large range of catch sizes for each tool


Tool Size (in) 2 2.875 3.625 4.00End Connection 1-1/2" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACTensile Strength (lbs) 25,000 43,000 136,000 180,000Length (ft) 1.36 1.59 2.00 2.05Working Pressure (psi) 5,000 5,000 5,000 5,000

26

Series 150 Overshot


Tool Size (in) 2.625 3.125 3.625 3.875End Connection 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PAC 2 - 3/8" REGTensile Strength Spiral (lbs) 101,600 193,500 193,500 155,100Tensile Strength basket (lbs) 86,400 173,200 157,400 144,200Max Catch range (in) 2.125 2.375 2.875 3.125

The Wellpro Group Series 150 Overshot is the most versatile and commonly used fishing tool in the industry.

It is designed to externally engage, pack-off and retrieve various types of fish. It is engineered to withstand heavy pulling, torsional applications and jarring strains without damaging or distorting the tool or the fish.

The 150’s rugged construction, simplicity and strength make it the standard choice amongst all external catch fishing tools.

Specifications and features• High Tensile strength suitable for heavy duty jarring operations• Can be dressed with various grapple sizes


Flow Release Spear


The Wellpro Group Flow Release Spear provides a method of engaging and pulling on fish, or other types of equipment, with a slick inside diameter. As this tool operates hydraulically it can be functioned multiple times. This is an advantage over other standard non-releasable overshots.



By changing out the grapple each tool size can engage a range of inside diameters and additionally the flow actuation can also be adjusted by fitting an alternative orifice.

Specifications and features• High tensile strength for jarring operations • Allows operator a means of engaging and pulling slick ID’s• Each tool size can engage a whole range of diameters by changing the grapple • Hydraulically activated • Large range of catch sizes for each tool


Tool Size (in) 2 2.875 3.625 4.00End Connection 1-1/2" AMMT 2-3/8" PAC 2-3/8" PAC 2-3/8" PACTensile Strength (lbs) 25,000 43,000 136,000 180,000Length (ft) 1.36 1.59 2.00 2.05Working Pressure (psi) 5,000 5,000 5,000 5,000

Series 150 Overshot


Tool Size (in) 2.625 3.125 3.625 3.875End Connection 1 - 1/2" AMMT 2 - 3/8" PAC 2 - 3/8" PAC 2 - 3/8" REGTensile Strength Spiral (lbs) 101,600 193,500 193,500 155,100Tensile Strength basket (lbs) 86,400 173,200 157,400 144,200Max Catch range (in) 2.125 2.375 2.875 3.125

The Wellpro Group Series 150 Overshot is the most versatile and commonly used fishing tool in the industry.

It is designed to externally engage, pack-off and retrieve various types of fish. It is engineered to withstand heavy pulling, torsional applications and jarring strains without damaging or distorting the tool or the fish.

The 150’s rugged construction, simplicity and strength make it the standard choice amongst all external catch fishing tools.

Specifications and features• High Tensile strength suitable for heavy duty jarring operations• Can be dressed with various grapple sizes


Hydraulic Jar

The Wellpro Group Jar is a Bi-Directional Hydraulic Jarring Assembly and is designed to operate in conjunction with the Wellpro Group Hydraulic Intensifier.

The jars unique design allows for easy dependable operation with no setting or adjustment required before use in the wellbore. The hydraulic assembly allows the operator to easily control the intensity of jarring impacts by varying the applied load at the tool. Due to an internal hydraulic metering system the jar can deliver a wide range of impacts, from low to very high, along with high impulse forces.


Specifications and features• No setting or adjustment is required before going down the hole or during operations• Jar can deliver a wide range of impacts• Large ID permits the use of drop balls for tools below• Can be utilised in milling and fishing operations• Short and robust tool • Industry proven design



Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.56 0.75 1.00Length Closed (ft) 5.75 5.58 7.00Max Jarring Overpull (lbs) 10,000 18,000 32,000Max Push (lbs) 10,000 18,000 32,000Tensile Strength (lbs) 50,000 95,000 195,000

28

Hydraulic Intensifier

The Wellpro Group Hydraulic Intensifier is a straight pull and push intensifier tool often referred to as an accelerator. It is designed to operate in conjunction with the Wellpro Group Hydraulic Jar.

The unique design allows for easy and dependable operation. The tool stores energy until it is released and can also be utilised as a shock absorber for shallow well applications. Internal hydraulic fluid located within the tool acts like a spring. When the tool is stroked open or closed the fluid contained within the tool is compressed. Stored energy is released in an over-pull scenario when the hydraulic jar below is activated. With the sudden release of the jar, the stored energy within the Intensifier is immediately released. The impact delivered by the jar is then amplified, producing significantly more load than if the jar was run independently.


Specifications and features• Increased impact ratios• Large ID permits the use of drop balls for tools below• Can be utilised in milling and fishing operations• Hydraulically operated• Short and robust tool • Industry proven design



Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.56 0.75 1.00Length Neutral (ft) 6.33 7.25 8.67Tensile Strength (lbs) 50,000 95,000 195,000Max Temperature (F) 400 400 400

Hydraulic Jar

The Wellpro Group Jar is a Bi-Directional Hydraulic Jarring Assembly and is designed to operate in conjunction with the Wellpro Group Hydraulic Intensifier.

The jars unique design allows for easy dependable operation with no setting or adjustment required before use in the wellbore. The hydraulic assembly allows the operator to easily control the intensity of jarring impacts by varying the applied load at the tool. Due to an internal hydraulic metering system the jar can deliver a wide range of impacts, from low to very high, along with high impulse forces.


Specifications and features• No setting or adjustment is required before going down the hole or during operations• Jar can deliver a wide range of impacts• Large ID permits the use of drop balls for tools below• Can be utilised in milling and fishing operations• Short and robust tool • Industry proven design



Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.56 0.75 1.00Length Closed (ft) 5.75 5.58 7.00Max Jarring Overpull (lbs) 10,000 18,000 32,000Max Push (lbs) 10,000 18,000 32,000Tensile Strength (lbs) 50,000 95,000 195,000

Hydraulic Intensifier

The Wellpro Group Hydraulic Intensifier is a straight pull and push intensifier tool often referred to as an accelerator. It is designed to operate in conjunction with the Wellpro Group Hydraulic Jar.

The unique design allows for easy and dependable operation. The tool stores energy until it is released and can also be utilised as a shock absorber for shallow well applications. Internal hydraulic fluid located within the tool acts like a spring. When the tool is stroked open or closed the fluid contained within the tool is compressed. Stored energy is released in an over-pull scenario when the hydraulic jar below is activated. With the sudden release of the jar, the stored energy within the Intensifier is immediately released. The impact delivered by the jar is then amplified, producing significantly more load than if the jar was run independently.


Specifications and features• Increased impact ratios• Large ID permits the use of drop balls for tools below• Can be utilised in milling and fishing operations• Hydraulically operated• Short and robust tool • Industry proven design



Tool Size (in) 1.688 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACID (in) 0.56 0.75 1.00Length Neutral (ft) 6.33 7.25 8.67Tensile Strength (lbs) 50,000 95,000 195,000Max Temperature (F) 400 400 400

29

Wireline Grab and Spear

The Wellpro Group Wireline Grab is used to fish broken wire from the wellbore. It consists of two or three flexible prongs extending downwards. After locating the top of the parted wire, the Wireline Grab is then run to snag the wire in the upward facing barbs of the grab arms.

The prong ends of the grab fits snugly against the walls of the tubing to help prevent wire by-pass.

Features• Pointed barbs are welded to the inside of the prongs to form hooks and allow easier retrieval of broken wire• Retrieves wire that has broken and balled in the tubing or wellbore• Two or three flexible prongs extending downwards

The Wellpro Group Wireline Centre Spear is a tool that is used to fish broken wire from the wellbore. The barbs are positioned around a main centre mandrel allowing efficient penetration into a tight ball of wire.

The Wireline Spear Stop Ring can be gauged for the wellbore. The prong ends of the Spear will increase in outer diameter until just below the diameter of the Stop Ring.

Features• Retrieves wire that has broken in the wellbore• Any combination of style, outer diameter and thread connection is available• Simple and robust design


Wireline Grab and Spear

The Wellpro Group Wireline Grab is used to fish broken wire from the wellbore. It consists of two or three flexible prongs extending downwards. After locating the top of the parted wire, the Wireline Grab is then run to snag the wire in the upward facing barbs of the grab arms.

The prong ends of the grab fits snugly against the walls of the tubing to help prevent wire by-pass.

Features• Pointed barbs are welded to the inside of the prongs to form hooks and allow easier retrieval of broken wire• Retrieves wire that has broken and balled in the tubing or wellbore• Two or three flexible prongs extending downwards

The Wellpro Group Wireline Centre Spear is a tool that is used to fish broken wire from the wellbore. The barbs are positioned around a main centre mandrel allowing efficient penetration into a tight ball of wire.

The Wireline Spear Stop Ring can be gauged for the wellbore. The prong ends of the Spear will increase in outer diameter until just below the diameter of the Stop Ring.

Features• Retrieves wire that has broken in the wellbore• Any combination of style, outer diameter and thread connection is available• Simple and robust design


Rotational

PRO Torque Downhole Motor

The Wellpro Group PRO Torque Downhole Motor incorporates industry leading bearing and power sections technology that are equipped for the most demanding downhole challenges.

The modular design can be tailored to suit various operational variables including high-temperature, rotational speed, two phase fluids and aggressive fluid applications.

The motors are designed to be used on a variety of coiled tubing and jointed pipe applications. They can be utilised for scale milling, plug removal, cement milling, debris removal, borehole/tubular enlargement, drilling and undreaming.

The positive displacement motors allow optimum reliability, power output and efficiency for technically challenging environments.

Specifications and features• Industry leading technology and components• Adaptable modular design• Optimum reliability and field proven• Rotor catch technology fitted as standard• High performance elastomers and durability

Motor Size (in)

Lobe Ratio

Number of Stages

Flow rate GPM

Rotation Rev/Gal

MotorConnections

Overall Length (ft)

1.688 5/6 2.3 20 – 40 9.25 1” AMMT 8.221.688 5/6 5 30 – 60 15.72 1” AMMT 11.472.125 5/6 6 20 - 60 12.78 1-1/2” AMMT 11.382.875 5/6 3.5 60 - 130 4.11 2-3/8” Pac 12.242.875 5/6 4.7 50 - 150 3.32 2-3/8” Pac 12.83

Motor Size (in)

Operating Torque Ft/Lbs

Bit Speed RPM

Max. Operating WOB Lbs

Max. Overpull Body Lbs

Max. Overpull Bit Box Lbs

Max. Operating Temp. F

1.688 160 185 - 370 5,600 45,500 30,000 3001.688 230 400 - 880 5,600 45,500 30,000 3502.125 350 250 - 750 9,700 90,000 39,000 300

2.875 650 250 - 520 10,400 165,000 70,000 350

2.875 830 170 - 500 10,400 165,000 70,000 350


Extreme temperature and other motor configurations and sizes available upon request. The equipment specifications and information advised in this document are for information only and may be liable to change without notice.


Downhole Mill

At Wellpro Group we have extensive experience of mill design with a large variety of designs and sizes available from our rental fleet. Operational requirements mean that many mills are designed and manufactured to suit specific client downhole applications.

Wellpro Group mill design examples are taper, convex, concave, flat-bottomed, bladed, single and multi-stage step and string mills. We also design and manufacture bespoke mills to suit specific fishing necks or other similar profiles.

A variety of cutting structures, diameter and connection configurations can be supplied.

Specifications and features• Utilised for operations such as hard scale, cement milling, plug removal, tubular restriction enlargement, fish dressing, general debris

removal and cleanouts• Proven and field-tested cutting structures available – Crushed carbide, Carbide inserts, Diamond Impreg, PDC • Can be designed and manufactured to suit specific size, application and connections• Robust design• Extensive range in stock


Downhole Mill

At Wellpro Group we have extensive experience of mill design with a large variety of designs and sizes available from our rental fleet. Operational requirements mean that many mills are designed and manufactured to suit specific client downhole applications.

Wellpro Group mill design examples are taper, convex, concave, flat-bottomed, bladed, single and multi-stage step and string mills. We also design and manufacture bespoke mills to suit specific fishing necks or other similar profiles.

A variety of cutting structures, diameter and connection configurations can be supplied.

Specifications and features• Utilised for operations such as hard scale, cement milling, plug removal, tubular restriction enlargement, fish dressing, general debris

removal and cleanouts• Proven and field-tested cutting structures available – Crushed carbide, Carbide inserts, Diamond Impreg, PDC • Can be designed and manufactured to suit specific size, application and connections• Robust design• Extensive range in stock


Washover Shoe

Wellpro Group have extensive washover shoe experience. We have a variety of designs and sizes available from our rental fleet.

Operational requirements dictate that many of these are designed and manufactured to suit specific client downhole applications.

The washover shoe design examples include flat, scalloped and castellated. The shoes can be dressed with the required cutting medium internally and externally. A variety of cutting structure, diameter and connection configurations can be supplied.

Specifications and features• Utilised in washover operations such as dressing of fish including Coil Tubing dressing • Proven and field-tested cutting structures available – Crushed carbide, Carbide inserts, Diamond Impreg, PDC • Can be designed and manufactured to suit specific size, application and connections• Robust design


Washover Shoe

Wellpro Group have extensive washover shoe experience. We have a variety of designs and sizes available from our rental fleet.

Operational requirements dictate that many of these are designed and manufactured to suit specific client downhole applications.

The washover shoe design examples include flat, scalloped and castellated. The shoes can be dressed with the required cutting medium internally and externally. A variety of cutting structure, diameter and connection configurations can be supplied.

Specifications and features• Utilised in washover operations such as dressing of fish including Coil Tubing dressing • Proven and field-tested cutting structures available – Crushed carbide, Carbide inserts, Diamond Impreg, PDC • Can be designed and manufactured to suit specific size, application and connections• Robust design


Specialist / Severance

Annular Flow Tool


The Wellpro Group Annular Flow Tool can be run into the well to improve and enhance wellbore cleanout efficiency during intervention or as a replacement for the conventional drop ball circulating sub.

The tool can be run in conjunction with motor and mill operations but can also be utilised in cleanout BHA’s.

This multi cycle tool can be switched numerous times and allows standard flow thru operations while running into the wellbore. By simply increasing the flowrate to a predetermined rate the tool switches and full flow is diverted to the work string annulus thus closing off all standard flow. When flow is reduced the tool reverts to standard flow through operation.

Specifications and features• Improves wellbore cleanout efficiency during intervention• Flow activated tool that can be switched numerous times during intervention operations• Eliminates the need to wait for an activation ball to land on seat • Cycling from one position to the other takes only a few seconds• Increased flexibility for operations• Decreases cleanout rotating hours on downhole motors


Tool Size (in) 1.688 2.125 2.875Connection Box and Pin 1” AMMT 1 -1/2” AMMT 2-3/8" PACTensile strength (lbs) 33,000 80,000 105,000Length (ft) 1.43 1.73 2.02Working Pressure (psi) 10,000 10,000 10,000Activation differential pressure (psi) 200-400 200-400 200-400

Torsional Yield (ft/lbs) 530 1,300 3,100Flow area through circulation ports (sq.in.) 0.262 0.39 0.66

36

Annular Flow Tool


The Wellpro Group Annular Flow Tool can be run into the well to improve and enhance wellbore cleanout efficiency during intervention or as a replacement for the conventional drop ball circulating sub.

The tool can be run in conjunction with motor and mill operations but can also be utilised in cleanout BHA’s.

This multi cycle tool can be switched numerous times and allows standard flow thru operations while running into the wellbore. By simply increasing the flowrate to a predetermined rate the tool switches and full flow is diverted to the work string annulus thus closing off all standard flow. When flow is reduced the tool reverts to standard flow through operation.

Specifications and features• Improves wellbore cleanout efficiency during intervention• Flow activated tool that can be switched numerous times during intervention operations• Eliminates the need to wait for an activation ball to land on seat • Cycling from one position to the other takes only a few seconds• Increased flexibility for operations• Decreases cleanout rotating hours on downhole motors


Tool Size (in) 1.688 2.125 2.875Connection Box and Pin 1” AMMT 1 -1/2” AMMT 2-3/8" PACTensile strength (lbs) 33,000 80,000 105,000Length (ft) 1.43 1.73 2.02Working Pressure (psi) 10,000 10,000 10,000Activation differential pressure (psi) 200-400 200-400 200-400

Torsional Yield (ft/lbs) 530 1,300 3,100Flow area through circulation ports (sq.in.) 0.262 0.39 0.66

Hydraulic Shifting Tool


The Wellpro Group Bi-Directional Shifting Tool is flow activated and allows the selective opening or closing of sliding sleeves.

The tool is run with the keys in the retracted position. It is activated by increasing the flow rate in order to expand the keys and locate the sleeve profile. As the sleeve is manipulated and fully travelled to the desired position, the tool will automatically disengage from the profile.

The tool can be fitted with single or dual activation directional keys, allowing the operator to shift the sleeve in either direction in a single run.

Additionally, each chassis size has the ability to cover a large range of profile sizes.

Specifications and features• Can be utilised with impact hammers and jarring tools • 360-degree coverage design provides superior contact compared to similar tools• Available to suit all standard type ‘B’ shifting profiles• Selectively engages desired profile• Automatically disengages from profile• Dual-action for opening or closing sliding sleeve• Simple, robust design ensuring ease of operation


Tool / SSD Size (in)

Chassis Size (in)

Collapsed Body / Run-in OD (in)

Tensile Strength (lbs)

End connection

Activation Pressure (psi)

Max Working Pressure (psi)

1.875 1.750 1.843 16,000 1-1/4” AMMT 450 - 650 5,0002.313 2.125 2.125 26,000 1-1/2” AMMT 450 - 650 5,0002.562 2.125 2.375 26,000 1-1/2” AMMT 450 - 650 5,000

2.750 2.125 2.625 26,000 1-1/2” AMMT 450 - 650 5,000

2.813 2.125 2.625 26,000 1-1/2” AMMT 450 - 650 5,000

3.313 2.875 3.250 60,400 2-3/8" PAC 650 - 850 5,000

3.562 2.875 3.400 60,400 2-3/8" PAC 650 - 850 5,000

3.688 2.875 3.563 60,400 2-3/8" PAC 650 - 850 5,000

3.813 2.875 3.650 60,400 2-3/8" PAC 650 - 850 5,000

4.313 2.875 4.250 60,400 2-3/8" PAC 650 - 850 5,000

4.562 2.875 4.437 60,400 2-3/8" PAC 650 - 850 5,000

37

I-Stroke Impact Hammer

The Wellpro Group I-Stroke Impact Hammer is a device used where an application requires a high impact in either an upward or downward direction. This tool features a configurable setup allowing greater flexibility.

The hammer can be run as a single Up or Down or as Bi-Directional allowing impact in either direction. The I-Stroke Impact Hammer is activated by flow combined with a small compression or pull-force, dependent on the impact direction.

Standard operations include Shifting sleeves, Shearing pins, Assisting with fishing operations or any other application where high frequency impacts are required.

Specifications and features• Can be run for applications that require either up, down or bi-directional impact forces• High frequency, 8-10 impacts per second• Bi-directional adapter prevents the hammer from being activated unless minimum push / pull force is exceeded• H2S resistant manufacture• A full thru bore which will allow a ½” ball to pass Available in H2S and Acid resistant materials• Can be operated with different fluids including water, brine, acid and nitrified fluid



Tool Size 2,125End Connection 1-1/2” AMMT

Torsional Yield (ft/lbs) 800

Tensile Strength (lbs) 43,000 Inside Diameter (in) 0.55Max. Operating Temp (F) 300Operating Flow range (gal/min) 13 – 79 Impact Forces (klbs) 21 – 37 Max Pressure (psi) 3,000 psi


I-Stroke Impact Hammer

The Wellpro Group I-Stroke Impact Hammer is a device used where an application requires a high impact in either an upward or downward direction. This tool features a configurable setup allowing greater flexibility.

The hammer can be run as a single Up or Down or as Bi-Directional allowing impact in either direction. The I-Stroke Impact Hammer is activated by flow combined with a small compression or pull-force, dependent on the impact direction.

Standard operations include Shifting sleeves, Shearing pins, Assisting with fishing operations or any other application where high frequency impacts are required.

Specifications and features• Can be run for applications that require either up, down or bi-directional impact forces• High frequency, 8-10 impacts per second• Bi-directional adapter prevents the hammer from being activated unless minimum push / pull force is exceeded• H2S resistant manufacture• A full thru bore which will allow a ½” ball to pass Available in H2S and Acid resistant materials• Can be operated with different fluids including water, brine, acid and nitrified fluid



Tool Size 2,125End Connection 1-1/2” AMMT

Torsional Yield (ft/lbs) 800

Tensile Strength (lbs) 43,000 Inside Diameter (in) 0.55Max. Operating Temp (F) 300Operating Flow range (gal/min) 13 – 79 Impact Forces (klbs) 21 – 37 Max Pressure (psi) 3,000 psi


Hydraulic Pipe Cutter

The Wellpro Group Hydraulic Tubing Cutter is a device used to cut production tubing, casing and drill pipe. The tool provides a safe alternative to chemical and explosive cutters. It is typically run in conjunction with Wellpro Groups Hydraulic Tubing Anchor and Positive Displacement Downhole Motor.

Flow through the tool creates the internal pressure required to shift the dual piston and blade cams which force the cutter blades to expand outwards. Jets help to clean the cut area whilst cooling the cutter blades. Upon completion of the cut a pressure drop indication may be witnessed. At this point flow is ceased and a compression spring forces the dual piston back to its starting position.

Pipe cutter blades can be dressed with a variety of cutting structures to suit the particular size and grade of tubular to be cut.

Specifications and features• Activation fluid is diverted up the tool to flush and assist with the cut• Knives are dressed with premium coated machine tool inserts enabling a fast and clean cut for various grades and specifications of tubing• Blades fully retracted and retained within the tool



Tool Size (in) 1.750 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACTensile Strength (lbs) 48,900 74,000 150,000Length (ft) 2.22 2.42 2.52Max tubing size (in) 4.00 4.50 5.50Working Pressure (psi) 5,000 5,000 5,000

39

Hydraulic Tubing Anchor

The Wellpro Group Hydraulic Tubing Anchor is a device used for anchoring bottom hole assemblies within the wellbore. It is typically run in conjunction with Wellpro Groups Hydraulic Tubing Cutter.

The anchor has a high expansion ratio allowing it to be run through restrictions within the completion tubing to anchor within a larger ID below.

The tool is hydraulically activated by the back pressure created from the tools below, however if required a choke can be incorporated to provide the required activation pressure. The anchoring blades cover a large range of tubing and casing sizes eliminating the need to change the blades to suit each operation.

The blades are fully retained within the body prior to flowing through the tool and are pulled back into the body when flow stops. Four blades guarantee centralisation within the tubular and maximum stability.

Specifications and features• Robust blade design for centralisation and stability• High expansion/body outer diameter ratio • Fully retained and automatically retractable blades• Large unrestricted through bore• Can be used as a high expansion centraliser• One size of anchor blade suits a range of inner diameters



Tool Size (in) 1.750 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACTensile Strength (lbs) 48,900 74,000 146,500ID (in) 0.367 0.500 0.750Length (ft) 2.68 2.87 3.95Max Tbg Size (in) 4.00 4-1/2 7.00Working Pressure (psi) 5,000 5,000 5,000


Hydraulic Tubing Anchor

The Wellpro Group Hydraulic Tubing Anchor is a device used for anchoring bottom hole assemblies within the wellbore. It is typically run in conjunction with Wellpro Groups Hydraulic Tubing Cutter.

The anchor has a high expansion ratio allowing it to be run through restrictions within the completion tubing to anchor within a larger ID below.

The tool is hydraulically activated by the back pressure created from the tools below, however if required a choke can be incorporated to provide the required activation pressure. The anchoring blades cover a large range of tubing and casing sizes eliminating the need to change the blades to suit each operation.

The blades are fully retained within the body prior to flowing through the tool and are pulled back into the body when flow stops. Four blades guarantee centralisation within the tubular and maximum stability.

Specifications and features• Robust blade design for centralisation and stability• High expansion/body outer diameter ratio • Fully retained and automatically retractable blades• Large unrestricted through bore• Can be used as a high expansion centraliser• One size of anchor blade suits a range of inner diameters



Tool Size (in) 1.750 2.125 2.875End Connection 1" AMMT 1 - 1/2" AMMT 2 - 3/8" PACTensile Strength (lbs) 48,900 74,000 146,500ID (in) 0.367 0.500 0.750Length (ft) 2.68 2.87 3.95Max Tbg Size (in) 4.00 4-1/2 7.00Working Pressure (psi) 5,000 5,000 5,000


Surface

SafeTorqCT™

The Wellpro Group SafeTorqCT™ is a compact torque wrench device for the make-up and break-out of threaded connections on small OD downhole tools. It can be used easily in the field or in the workshop. The SafeTorqCT™ removes the guesswork and hence the associated safety hazards which may occur when using pipe wrenches to torque threaded connections.

The design of the SafeTorqCT™ allows torque to be applied to threaded connections in a safe and controlled manner, allowing the operator to remain at a safe distance during make & break operations force transmission.

The SafeTorqCT™ can be supplied in a dedicated flight case, containing everything required to perform make & break operations in the field or workshop. It comprises of hand pump, bi-directional hydraulic cylinder and torque clamps fitted with heat-treated dies designed for longevity which can be easily replaced in the field.

The clamps are attached to either side of a threaded connection and both clamps tightened. The hydraulic hoses are fitted to the hydraulic cylinder. The application of hydraulic pressure via the handpump produces a torque which can be used to make-up or break a connection.

During the design and development stage of the SafeTorqCT™, the input and feedback received from the TT Service industry and Thru Tubing professionals proved invaluable. It ensured the practicality and durability of the product and that it is supplied with certified lifting points and slings.

Benefits and features• Simplicity of use, coupled with a compact and robust design• Safe, measured and calibrated way to torque and un-torque connections• Lightweight allowing easy use and transportation• Make up and break out of connections on small tools and tubulars• SafeTorqCT™ can be used vertically and horizontally• Adjustable to suit various diameters of tools


The equipment specifications provided are for information purposes only and may be subject to change without notice.

Clamp Capacity (in) 1.688 – 3.125Weight - Torquehead (kgs) 13

Maximum torque (ft/lbs) 4,000


Mini Tong

The Wellpro Group Hydraulic Mini Tong is designed with rig floor and service facility practicality.

The mini tongs are hydraulically controlled and operated via a pneumatic power pack. It can be used both vertically and horizontally to aid tool string make-up.

Wellpro Group maintains, calibrates and service these units on a regular basis to ensure a long, trouble-free life while avoiding unsafe operating conditions and premature breakdown.

During its design and development, industry operator input was obtained to ensuring the units durability and practicality. Its compact size provides a measured and calibrated way to make up and break out connections on small tools and tubulars.

Benefits and features• Simplicity of use coupled with compact and robust design• Safe operation for the rig floor and service shop• Make up and break out of connections on small tools and tubulars• Hydraulically controlled and operated via a pneumatic power pack • Can be used both vertically and horizontally• Extensive field operating hours

Capacity (in) 1.688 – 3.500Size (l x w x h) 22-1/2” x 20” x 23”Distance between jaws (in) 3Weight (lbs) 210 Maximum torque (ft/lbs) 5,000 Operating pressure (psi) 2,900



SafeTorqCT™

The Wellpro Group SafeTorqCT™ is a compact torque wrench device for the make-up and break-out of threaded connections on small OD downhole tools. It can be used easily in the field or in the workshop. The SafeTorqCT™ removes the guesswork and hence the associated safety hazards which may occur when using pipe wrenches to torque threaded connections.

The design of the SafeTorqCT™ allows torque to be applied to threaded connections in a safe and controlled manner, allowing the operator to remain at a safe distance during make & break operations force transmission.

The SafeTorqCT™ can be supplied in a dedicated flight case, containing everything required to perform make & break operations in the field or workshop. It comprises of hand pump, bi-directional hydraulic cylinder and torque clamps fitted with heat-treated dies designed for longevity which can be easily replaced in the field.

The clamps are attached to either side of a threaded connection and both clamps tightened. The hydraulic hoses are fitted to the hydraulic cylinder. The application of hydraulic pressure via the handpump produces a torque which can be used to make-up or break a connection.

During the design and development stage of the SafeTorqCT™, the input and feedback received from the TT Service industry and Thru Tubing professionals proved invaluable. It ensured the practicality and durability of the product and that it is supplied with certified lifting points and slings.

Benefits and features• Simplicity of use, coupled with a compact and robust design• Safe, measured and calibrated way to torque and un-torque connections• Lightweight allowing easy use and transportation• Make up and break out of connections on small tools and tubulars• SafeTorqCT™ can be used vertically and horizontally• Adjustable to suit various diameters of tools



Clamp Capacity (in) 1.688 – 3.125Weight - Torquehead (kgs) 13

Maximum torque (ft/lbs) 4,000


Mini Tong

The Wellpro Group Hydraulic Mini Tong is designed with rig floor and service facility practicality.

The mini tongs are hydraulically controlled and operated via a pneumatic power pack. It can be used both vertically and horizontally to aid tool string make-up.

Wellpro Group maintains, calibrates and service these units on a regular basis to ensure a long, trouble-free life while avoiding unsafe operating conditions and premature breakdown.

During its design and development, industry operator input was obtained to ensuring the units durability and practicality. Its compact size provides a measured and calibrated way to make up and break out connections on small tools and tubulars.

Benefits and features• Simplicity of use coupled with compact and robust design• Safe operation for the rig floor and service shop• Make up and break out of connections on small tools and tubulars• Hydraulically controlled and operated via a pneumatic power pack • Can be used both vertically and horizontally• Extensive field operating hours

Capacity (in) 1.688 – 3.500Size (l x w x h) 22-1/2” x 20” x 23”Distance between jaws (in) 3Weight (lbs) 210 Maximum torque (ft/lbs) 5,000 Operating pressure (psi) 2,900



Hydraulic C-Plate

The Wellpro Group Hydraulic C-Plate was designed to minimise personnel exposure to pinch points and moving parts and allow safe and efficient make-up of tool string connections.

The simple operation is completed by the use of a hydraulically operated hand pump. This allows the operator full and managed control of raising and lowering the BHA tool string.

Features• Minimises risk of personnel injury or operator error• Minimises risk of equipment damage by movement of CT, string or blocks• Safe & efficient tool string make up• Eliminates radio miscommunication• Engineered and compact design


Dart and Ball Catcher

The Wellpro Group Dart and Ball Catcher is designed to contain fluid and indicate when the coiled tubing reel has been successfully circulated and drifted. The operation is completed in a safe and environmentally friendly manner.

The operation is typically carried out using a steel ball and dart sized to suit the internal diameter of the coil tubing. The tool simply connects to the specific coiled tubing connector and the lower end can be connected to a drain line for containment of any pumped medium.

Once the ball has been circulated through the reel it locates within the catcher ball seat. This creates a pressure build up which forces the piston downwards and allows the operator a visual indication.

The tool is also fitted with a rupture disc as standard. This feature prevents any overpressure due to plugging or any accidental downstream closure.

Specifications and features• Environmentally friendly due to elimination of spills• Positive visual indication after activation• Pumped and discharged fluids can be routed

to required location for disposal• Rupture disc facility to prevent overpressure • Facility to bleed off and safely remove any trapped pressure

Tool Size (in) 3.50ID of Ball Seat (in) 0.719Ball Catch Seat (in) 0.75 – 1.50Working Pressure (Psi) 5,000



UK/Europe/Africa Omega House Kirkhill Road Kirkhill Industrial Estate Dyce Aberdeen AB21 0GQ United Kingdom [email protected]

Middle East Regional Office Warehouse: RA08NB02 Jebel Ali Free Zone Dubai, PO Box 17745 United Arab Emirates [email protected]

Asia Pacific Regional Office Menara Prestige No 1 Jalan Pinang 50450, Kuala Lumpur Malaysia [email protected]

Thru Tubing Product Catalogue - wellprogroup.com

Documents

Transcript of Thru Tubing Product Catalogue - wellprogroup.com