Thrill 430x Driver Installation

21
Cloudfone Thrill 430x Driver Installation Note: Make sure the PC is using Windows XP OS. 1. Turn on the Thrill 430x by pressing the power button. 2. Connect it to a PC via a working USB Cable. 3. The PC will detect a new device connected to it. a. If it doesn’t, try changing a USB cable. b. If it still doesn’t work, the Thrill 430x might have problems. Please go to the nearest authorized service center to get it repaired. 4. As soon as the PC detects the new device connected to it, a series of New Hardware Wizard will appear. Select Cancel to all the windows.

description

thrill

Transcript of Thrill 430x Driver Installation

Cloudfone Thrill 430x Driver InstallationNote: Make sure the PC is using Windows XP OS.1. Turn on the Thrill 430x by pressing the power button.2. Connect it to a PC via a working USB Cable. 3. The PC will detect a new device connected to it.a. If it doesnt, try changing a USB cable.b. If it still doesnt work, the Thrill 430x might have problems. Please go to the nearest authorized service center to get it repaired.4. As soon as the PC detects the new device connected to it, a series of New Hardware Wizard will appear. Select Cancel to all the windows.

5. Install the drivers for the Thrill 430x from the device. The drive will appear with a label cdrom_install.

6. Upon double-clicking the drive, it will open the contents. Run Setup by double-clicking on it.

7. Follow the Setup instructions.

8. Upon finishing setup installation, the Android Driver will launch. Follow the instructions as well. 9. Upon finishing Installation, the series of New Hardware Wizard windows will appear again. This time follow the installation procedures except for Android wherein it will still be Cancelled. 10. After installing all the new hardware detected by the PC, disconnect the Thrill 430x from the PC.11. Remove the battery of the Thrill 430x.12. Put it back again after 5 seconds.13. Turn on the Thrill 430x by pressing the Volume Up, Volume Down and Power Buttons simultaneously. If the Thrill 430x vibrates, let go of the 3 buttons. If it doesnt, continue holding the 3 buttons for 5 seconds before letting go.14. Connect the Thrill 430x to your PC via a USB cable.15. Upon connecting, it will detect a new hardware again. Follow the installation procedures. 16. After finishing Installation of the new hardware, proceed to the Thrill 430x SW Tool folder.17. Install Python by double-clicking on the Phython file in the Thrill 430x SW Tool folder. Follow the installation procedures. 18. After successful installation, the PC is now prepared for using the SW upgrade tool of Thrill 430x.