THREADED / DIE-CAST FLAT BARS
2
THREADED / DIE-CAST FLAT BARS Size Distance between holes Metric thread 12x2 18 M5 12x4 18 M5 12x5 18 M5 15x5 25 M6 18x4 20 M8 20X5 25 M6 25x4 20 M6 30x5 25 M6 Size Distance between holes Metric thread Round hole 15x5 25 M6 Ø 8 20x5 25 M6 Ø 10 25x5 25 M6 Ø 10 32x5 25 M6 Ø 12 20x10 25 M8 Ø 10 30x10 25 M8 Ø 10 Size Distance between holes Metric thread Oblong hole 15x5 25 M6 8X12 20x5 25 M6 10X14 25X5 25 M6 10X14 30x5 25 M6 12X16 32x5 25 M6 12X16 ( 1 ) x ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 1 ) x ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 1 ) x ( 2 ) ( 3 ) ( 4 ) Notes : The round / oblong holes are made with a tolerance of -0+0,5 mm Comercial lengths : 990/1000 / 2000 / 2500 / 3000 / 5000 mm Other sizes and formats available on request ALL MEASUREMENTS ARE IN mm. 1 x 2 Dimensions 3 Distance between holes 4 Metric thread 5 End hole MEASUREMENTS DRILLED COPPER BUSBAR With oblong hole With metric thread Round hole
description
THREADED / DIE-CAST FLAT BARS Bronmetal
Transcript of THREADED / DIE-CAST FLAT BARS
THREADED / DIE-CAST FLAT BARS
Size Distance between holes Metric thread
12x2 18 M512x4 18 M512x5 18 M515x5 25 M618x4 20 M820X5 25 M625x4 20 M630x5 25 M6
Size Distance between holes Metric thread Round hole15x5 25 M6 Ø 820x5 25 M6 Ø 1025x5 25 M6 Ø 1032x5 25 M6 Ø 12
20x10 25 M8 Ø 1030x10 25 M8 Ø 10
Size Distance between holes Metric thread Oblong hole15x5 25 M6 8X1220x5 25 M6 10X1425X5 25 M6 10X1430x5 25 M6 12X1632x5 25 M6 12X16
( 1 ) x ( 2 ) ( 3 ) ( 4 ) ( 5 )
( 1 ) x ( 2 ) ( 3 ) ( 4 ) ( 5 )
( 1 ) x ( 2 ) ( 3 ) ( 4 )
Notes : The round / oblong holes are made with a tolerance of -0+0,5 mmComercial lengths : 990/1000 / 2000 / 2500 / 3000 / 5000 mm
Other sizes and formats available on requestALL MEASUREMENTS ARE IN mm.
1 x 2 Dimensions
3 Distance between holes
4 Metric thread
5 End hole
MEASUREMENTS
DRILLED COPPER BUSBAR
With oblong hole
With metric thread
Round hole
PUNCHED COPPER BUSBAR
ZIG-ZAG DRILLED COPPER BUSBAR
Size Distance between holes Metric thread Oblong hole32X5 17,5 M6 12X16
Size Distance between holes Diameter25X5 25 1050X5 25 1063X5 25 1080X5 25 10
100X5 25 10125X5 25 1050X10 25 1060X10 25 1080X10 25 10
100X10 25 10120X10 25 10
Notes : The round / oblong holes are made with a tolerance of -0+0,5 mmComercial lengths : 990/1000 / 2000 / 2500 / 3000 / 5000 mmOther sizes and formats available on reques
Sede Central Barcelona Madrid Valencia
C/ Bizkargi, 6 C/ Marconi, 13 - Pol. Ind. Sesrovires C/ Nobel, 2 - 4 C/ Mont Cabrer, 22
Pol. Ind. Sarrikola E-08635 Sant Esteve Sesrovires Pol. Ind. San Marcos Pol. Ind. La Lloma
E-48195 Larrabetzu (Bizkaia) (Barcelona) E-28906 Getafe (Madrid) E-46960 Aldaya (Valencia)
Tel: +34 944 731 500 Tel: +34 937 715 307 Tel: +34 916 652 597 Tel: +34 961 517 297
Fax: +34 944 117 387 Fax: +34 937 713 866 Fax: +34 916 928 674 Fax: +34 961 517 364
E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]
www.bronmetal.com
( 1 ) x ( 2 ) ( 3 ) ( 4 ) ( 5 )
( 1 ) x ( 2 ) ( 3 ) ( 4 )
With oblong hole
Punched
