This Article is for DB2 9.7.2 Installation

DB2 9.7.2 Installation Steps 2010

By

Rakesh D. Tiwari [email protected]

How to install the DB2 9.7.2 Express –C? OR Cannot install the DB2

9.7.2 Express-C?

The Installation of DB2 Express-C with Windows XP and Vista and the processor architectures

available are 32-bit, 64-bit. Operating system requirements for all DB2 editions are at the link

http://www.ibm.com/software/data/db2/udb/sysreqs.html

Let’s begin with the Pre-installation procedure means the points for the consideration before

installation:

Point 1: - Hardware Resources

DB2 Express-C can be installed on systems with any number of CPU cores and memory. There

are two points to be noted:-

1. DB2 9 will work for 2GB RAM and 2 cores for unwarranted license version.

2. For the paid subscription version DB2 express will work for 4GB RAM and 4 cores.

Point 2:- Operation System for user Authority point

For the installation for on the PC keep these points in mind:

1. Must belong to the administrator group or must have administrative rights.

2. For windows Vista and higher will work for non-administrative, but will prompt for the

administrative credentials by the DB2 Setup.


Installation Process:-

Dear user of DB2 installation please follows these steps for successful the installation of DB2

9.7.2 is given below:-

Step-1: Procedure for the Download the DB2

1.1 Link for the free License version for DB2 9.7.2 is

http://www.ibm.com/developerworks/downloads/im/udbexp/

Please download as per your configuration 32-bit or 64-bit.

http://www.ibm.com/developerworks/downloads/im/udbexp/


1.2 To download this you need the IBM User ID and Password.


1.3 Agreement page for installation:-


1.4 Select the proper one as you like to download.


1.5 Downloading Screen

It will also popup the new dialog box to save the setup location of Path.


After download the setup follow step -2

Step-2: Unzip the file with WinZip

2.1 Go to the Location of the download file and you will get this db2exec_972_win_x86 zip file

with below icon in the below image.

Note: Unzip with creating folder of same name of the below icon file name

2.2 Go to the path db2exc_972_WIN_x86\setup find and Click.


Step-3:- DB2 9.7.2 Setup Begins with DB2 setup Launch pad

click on the Install a Product


Step-4: - Click on the Install New


Step-4:- Welcome screen continue same screen as above.


Step-5:- Software License Agreement


Step-6:- It is sufficient to choose


Step-7:- Selecting the installation:-

DB2 9.7.2 Installation Steps 2010 It is to install the setup and you can also save the setting of Response file. The Response file is

sometime needed for the installation.

Default setting by IBM for DB2 is:

Install DB2 Express-C on this computer and save my setting in a response file

It is recommended to keep both i.e. last options (Default).

Note: - Remember the Response file may need you for installation for the next time. Another way of

the installation is by Response File. Because to create another sample response file for installation.

Well we will not need this time in this.

Step-8:- Path for the installation setup.


Step-9:- User Information for the DB2 administration


1. For Local System account the default user name is db2admin and no need for the password.


2. Domain user information for the DB2 administration we need the domain name, user name

and password.

3. If you are getting the message that:

(Domain and username not found or not enough privileges to check credentials on the domain

server. If user name and password is correct then click ok)

4. When above message box appear if you are confirm for username and password then

continue by clicking ok.


Step-10:- The instance of the DB2 setup will be created with

name DB2.


Step-11:- This installation wizard shows the summary of the

Details what will be installed on the computer with

DB2 Setup.


Step-12:- Successful installation of the DB2.

Note: - Refer the Required Steps you may need to perform for the validation of the setup.


Step-13: - This is the wizard or screen you will get after the

successful installation after a moment of time as

per your pc configuration. This indicates the setup

is installed with our any fault or error.


You can also open the DB2 First Step from:

Start All Programs IBM DB2

Step-14: - Point for Validation of the installation setup is

proper

The proper installation of the DB2 setup is validated by the three commands which

are to be run on the command window.

The commands are: - (1) db2level, (2) db2licm –l and (3) db2val.

1. The db2level command on run, it display the DB2 9.7.2 Product, fix pack and other

details on the command window.


2. The db2licm –l command on run, it display all the license details of the DB2

Product to you.

3. The db2val command on run, it displays following things:-

It checks the core functionality of the DB2COPY1.


Instance of DB2 which we created is successful. The name of the

instance is DB2.

Now you can start your journey of Database with DB 9.7.2

Summary:

This article shows how to install the DB2 9.7.2 on the particular PC that’s it. The

further articles will be based on the Tools of the DB2 like command line Tool, General

Administrative Tool, Set-up Tool.

This Article is for DB2 9.7.2 Installation

Documents

Transcript of This Article is for DB2 9.7.2 Installation