Thermal Quot

E.Mail : mechlab.cbe@ gmail.com Ph.no : 0422 – 2929042 [email protected] Fax : 0422 – 2343553 [email protected] Mobile : 09443736743

S.F No: 103/2, Subbanaickenpudur road, Chinnavedampatti (Po), Coimbatore – 641 049.

REF NO: W/V/q0205/MECH/12 DATE: 30.05.12

To,

The Principal, Ranippettai Engineering college, T.k.thangal. Walaja – 632513, Vellore.

KIND ATTENTION : Mr.J.Murugesan

Dear Sir,

Sub: Supply of Mechanical laboratory equipments – reg.

Ref : Your telephonic enquiry date : 30.05.12.

With reference to the above, we are submitting our most competitive offer for the supply

of Mechanical laboratory equipments as required by you. We assure the best services after sales.

We expect your early valuable orders to enable us to proceed further.

Thanking you.

Yours faithfully,

For Mech-Lab Equipments(India) Pvt.Ltd.P.Anand,

Mfrs & Suppliers of Hydraulic, Thermal, Refrigeration & A/C, Heat Transfer, Dynamics,Steam, Fuels & Automobile Laboratory Equipments to Engineering Colleges, Polytechnics

MECH – LAB EQUIPMENTS (INDIA) PVT.LTD,

mailto:[email protected]

mailto:[email protected]

mailto:mechlab.cbe@

09443736743.

QUOTATION FOR MECHANICAL LABORATORY

S.NO NAME OF THE ITEM PRICE

01.

HEAT TRANSFER LABORATORY

HEAT TRANSFER THROUGH LAGGED PIPE

This laboratory scale working model housed on a M.S. Square tube frame and powder coated metal panel with instrumentation I) To determine the thermal conductivity of pipe insulation. TECHNICAL SPECIFICATIONS :

PIPES :

Diameter : 50/100/150 mm dia(approx)Length : 500 mm (Approx.)Material : M.S.Quantity : 1 No. each

MEASURING INSTRUMENTS

Digital Voltmeter, Range : 0 to 300 VDigital Ammeter, Range : 0 to10 AmpsDigital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES

Type : Cr.Al.Length : 1 Mtr

ELECTRONIC DIMMER

Range : 0 to 220 volts Ac

Rs. 35,600 /

02. THERMAL CONDUCTIVITY BY GUARDED HOT PLATE (SOLID)

This laboratory scale working model housed on a M.S. Square tube

frame and powder coated metal panel with instrumentation I) To study the

thermal conductivity by guarded hot plate.

TECHNICAL SPECIFICATIONS : GUARDED PLATE SECTION :

Main Heater Plate Diameter : 90 mmMaterial : BrassRing Heater Diameter : 100 ID / 150 OD mmMaterial : MICA

Ring Heater Plate Diameter : 100 ID / 150 mm OD Material : BrassAsbestos plate : 150 OD / 12 mm thick

Cooling jacket Diameter : 150 ODMaterial : BrassSize : 12 mm thick


Digital Voltmeter, Range : 0 to 300 V Digital Ammeter, Range : 0 to 5 Amps Digital Temp. Indicator with

Selector Switch. : Ambient to 199.9 deg.c. THERMOCOUPLES

Type : Cr. Al. Length : 1 Mtr.

ELECTRONIC DIMMER Range : 0 to 220 volts Ac

Rs. 47,300 /-

03. HEAT TRANSFER IN FORCED CONVECTION

This laboratory scale working model housed on a M.S. Square tube frame and

powder coated metal panel with instrumentation I) To study the heat transfer co-

efficient of horizontal cylinder and to compare with experimental valve.

TECHNICAL SPECIFICATIONS BLOWER

Capacity : 350 watts / 1.5 cumts/m TEST SECTION

Diameter : 40 mmLength : 300 mm


Digital Voltmeter, Range : 0 to 300 VDigital Ammeter, Range : 0 to10 Amps

Digital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES


ELECTRONIC DIMMER

Range : 0 to 220 volts Ac ‘U’ TUBE MANOMETER : 1 No.

Material : Glass Rs. 43,700/-

04. HEAT TRANSFER IN NATURAL CONVECTION


powder coated metal panel with instrumentation I) To study the heat transfer co-

efficient of vertical cylinder and to compare with experimental valve.

TECHNICAL SPECIFICATIONS : S.S. CYLINDRICAL TUBE

Diameter : 40 mmLength : 400 mm


Digital Voltmeter, Range : 0 to 300 VDigital Ammeter, Range : 0 to 10 AmpsDigital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES


ELECTRONIC DIMMER


Rs. 37,400 /-

05. HEAT TRANSFER FROM PIN-FIN


powder coated metal panel with instrumentation I) To determine the heat transfer co-

efficient under forced condition and to find out effectiveness and efficency of pin–fin

TECHNICAL SPECIFICATIONS

BLOWER : Capacity : 350 watts / 1.5 cumts/m

TEST SECTION

Diameter : 12 mmLength : 150 mmMaterial : Brass

DUCT

Size : 100 x 150 x 500 mmMaterial : MS with Powder Coating


Digital Voltmeter, Range : 0 to 300 VDigital Ammeter, Range : 0 to10 AmpsDigital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES


ELECTRONIC DIMMER

Range : 0 to 220 volts Ac ‘U’ TUBE MANOMETER : 1 No.

Material : GlassRs. 43,700 /-

06. PARALLEL/COUNTER FLOW HEAT EXCHANGER


powder coated metal panel with instrumentation I) To determine the effectiveness

and overall heat transfer co-efficient for parallel and counter flow heat exchanger.

TECHNICAL SPECIFICATIONS : GEYSER

Capacity : 3 KW HEAT EXCHANGER OUTERPIPE INSULATED BY ASBESTOS

ROPE

Diameter : 25 mmMaterial : G.I.

HEAT EXCHANGER INNER PIPE

Length : 1000 mmDiameter : 12.5 mm ODMaterial : Copper

DIGITAL TEMPEATURE INDICATOR WITH SELECTOR SWITCH

Range : Ambient to 199.9 deg.c. THERMOCOUPLES


MEASURING JAR : 1 Ltr. Capacity Rs. 30,200 /-

07. EMMISSIVITY MEASUREMENT APPARATUS


powder coated metal panel with instrumentation I) To determine the emmissivity of a

grey surface at different temperatures.

TECHNICAL SPECIFICATIONS PLATES

Diameter : 150 mm Material : BrassHeater : 250 WSpecimen : Black Body and Grey Body

RECTANGULAR DUCT

Material : M.S. with Powder Coating front Acrylic Window. MEASURING INSTRUMENTS

Digital Voltmeter, Range : 0 to 300 V

Digital Ammeter, Range : 0 to10 AmpsDigital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES


ELECTRONIC DIMMER


Rs. 37,400 /-

08. STEFAN BOLTZMAN APPARATUS

This laboratory scale working model housed on a M.S. Square tube frame and powder coated metal panel with instrumentation I) To determine the value of Stefan – Boltzman constant for radiation heat transfer.TECHNICAL SPECIFICATIONS

STEFAN BOLTZMAN SECTION

a) Hemisphere Diameter : 200 mmMaterial : Copper

b) Outer Jacket Diameter : 250 mm

Material : Copperc) Hylum Base Plate : 12 mm thickd) Test disc

Size : 20 mm dia x 1.5 mm thick WATER TANK WITH IMMERSION HEATER

a) Material : S.S. MEASURING INSTRUMENTS

Digital Temp. Indicator with Selector Switch. : Ambient to 199.9 deg.c.

THERMOCOUPLES


Rs. 45,500 /-

09. SINGLE STAGE SINGLE CYLINDER AIR COMPRESSOR TEST RIG

COMPRESSOR :

No. of Cylinder : One No. of Stages : One Displacement : 100 LPM Working pressure : 10 Kg / cm² Storage tank : 150 litres

Air reservoir : 150 ltrs.

Motor : 2 HP, A.C. 440 volts. Three phase.

Air box with orifice for air intake measurement.

Panel : Energy meter for input power measurement, Starter, ‘U’ tube

manometer.

Rs.69,800/-

09a. TWO STAGE TWIN CYLINDER AIR COMPRESSOR TEST RIG

COMPRESSOR :

No. of Cylinder : Two No. of Stages : Two Displacement : 300 LPM Working pressure : 10 Kg / cm² Storage tank : 220 litres

Air reservoir: 220 ltrs.

Motor: 3 HP, A.C. 440 volts. Three phase.

Air box with orifice for air intake measurement.

Panel: Energy meter for input power measurement, Starter, ‘U’ tube manometer, Digital Temperature indicator with selector switch, Digital Speed indicator for speed measurement.

ELGI Make

SUGUNA Make

Other make

Rs. 1,42,700/-

Rs. 1,24,700/-

Rs. 1,07,600/-

10. REFRIGERATION TEST RIG

AIM:

This laboratory scale working model housed on a MS Square tube frame and

further mounted on a wheels (CI) with instrumentation panel is used i) To study the

vapor compression refrigeration cycle ii) To calculate Co-efficient of performance

(COP).

TECHNICAL DATA HERMITICALLY SEALED COMPRESSOR

Capacity : 1/3 Ton AIR COOLED CONDENSER

Capacity : 1/2 Ton CONDENSER COOLING FAN

Capacity : 1/83 HP HAND SHUT OFF VALVES

Size : 1/4 “ FILTER DRIER : DM 50 (¼”) ENERGY METER : 1 No. THERMOSTAT : 1 No. PRESSURE GAUGES : 1 No. Each

Range : 0 to 300 psi/-30” Hg to +150 psi Measuring Instruments

Digital Temperature Indicator : - 30 to 199.9 deg.c. Rs. 87,800 /-

11. AIR CONDITIONING TEST RIG

AIM:

This laboratory scale working model housed on a MS Square tube frame

further mounted on a wheels (CI) with instrumentation panel is used i) To study the

Vapor Compression Cycle ii) To calculate co-efficient of performance (COP) iii)

To evaluate tonnage capacity iv) To study humidification and dehumidification.

TECHNICAL DATA: HERMITICALLY SEALED COMPRESSOR

Capacity : 1.0 Ton Make : EMERSON

AIR COOLED CONDENSER Capacity : 1.0 Ton

CONDENSER COOLING FAN

Capacity : 1/10 HP HAND SHUT OFF VALVES

Size : 3/8” & 1/4” FILTER DRIER : DM - 50 (3/8”) ENERGY METERS : 1 No. THERMOSTAT : 1 No.

PRESSURE GAUGES : 1 Nos. each Range : 0 to 300 psi/-30” Hg to +150 psi

MEASURING INSTRUMENTS Digital Temperature Indicator :

Ambient to 199.9 deg.c. AIR CONDITIONING DUCT : 1 SET

Rs.1,42,700 /-

01.

THERMAL ENGINEERING LAB

CUT SECTION MODEL OF ACTUAL SINGLE CYLINDER TWO STROKE PETROL ENGINE FOR PLOTTING PORT TIMING DIAGRAM:With carburetor, spark plug, cylinder, piston, connecting rod, crank shaft, etc.

All parts cut opened to study the components and its working and also to draw

valve timing diagram.

Rs. 17,600 /-

01a. CUT SECTION MODEL OF ACTUAL SINGLE CYLINDER FOUR STROKE PETROL ENGINE FOR PLOTTING VALVE TIMING DIAGRAM:With carburetor, spark plug, cylinder, piston, connecting rod, crank shaft,

valve mechanism, cam shaft, crank shaft, valve push rod, timing gears, etc, all

parts cut opened to study the components and its working and also to draw

valve timing diagram.

Rs. 19,400 /-

01b. CUT SECTION MODEL OF ACTUAL SINGLE CYLINDER FOUR STROKE DIESEL ENGINE FOR PLOTTING VALVE TIMING DIAGRAM:With fuel injector, fuel pump, fuel filter, lubrication oil pump, air cleaner,

silencer, governor, valve mechanism, cam shaft, crank shaft, valve push rod,

timing gears, etc, all parts cut opened to study the components and its working

and also to draw valve timing diagram. Rs. 29,300 /-

02. REDWOOD VISCOMETER (NO: 1)

These viscometers are designed for viscosity tests of petroleum products.

The complete out fit comprises hammer finished Stainless steel bath with

electrical heating Arrangement suitable to operate at 220 Volts AC Main worth

tap, silver plated oil cup with precision stainless steel jet, cup cover, ball valve,

thermometer-clip. Stirrer and M.S. Sheet stand with leveling screws.

Electrically heated model with energy regulator control, Accessories for the

above:

Thermometer – 2 Nos,

Flask receivers 50 ml – 1 No.Rs. 12,200/-

03. CLEAVELAND FLASH & FIRE POINT APPARATUS

This apparatus is used for determination of flash point and fire point of

petroleum products except fuel oil with open cup flash below 80 deg.c. The

apparatus consists of a cup, heating plate to specific dimension thermometer

clip and test flame attachment with swivel joint for passing over test liquid

surface in the prescribed manner, Heating is controlled by means of energy

regulator fitted to the apparatus. Suitable for operation on 220 Volts 50 Cycles

AC Circuits.

Electrical heating with energy regulator control

Accessories for the above :

(a) Thermometer - 2 nos.Rs. 10,400/-

03a. PENSKY MARTEIN FLASH POINT APPARATUS

The apparatus consists of brass test cup with handily removable cup

cover with spring Operated rotating shutter having pilot jet, stirrer with

flexible shaft. The Assembly rests in air bath which is covered with Dome

shape metal top. The fitted with insulated handle and locking arrangement near

Cup Flange. The assemble is kept on round shape electric heater with temp.

regulator. Suitable for operation 220 Volts 50 cycles AC Circuits. With oil test

jet electrical heating with energy regulator,

Accessories for the above:

Open clip for converting close model to open cup test model.

Thermometer with brass collar – 2 nosRs.14,900/-

04. SINGLE CYLINDER FOUR STROKE DIESEL ENGINE TEST RIG ( MAKE : KIRLOSKAR – brand new )

Engine: 5 HP at 1500 RPM coupled with loading device on a common

base plate.

Panel : Burette for fuel consumption, ‘U’ tube manometer for air

intake measurement, Digital Temperature indicator with selector

switch, Digital Speed indicator for speed measurement.

Experiments : 1.Performance test

2.Heat balance test

With Rope brake dynamometer With Hydraulic dynamometer With Electrical dynamometer

With Eddy current dynamometer Retardation Test

Rs. 97,250/-Rs. 1,55,300/-Rs. 1,47,200/-Rs. 1,75,100/-Rs. 37,400/-

Extra

05. SINGLE CYLINDER FOUR STROKE AIR COOLED PETROL

ENGINE TEST RIG ( MAKE : HONDA – brand new )

Engine: 3 HP at 3000 RPM coupled with loading device on a common

base plate.

Panel : Burette for fuel consumption, Digital Temperature indicator

with selector switch, Digital Speed indicator for speed measurement.


With Rope brake dynamometer Rs. 84,200/-

With Electrical dynamometer

With Eddy current dynamometer

Rs. 1,37,300/-

Rs. 1,65,200/-

06. MULTI CYLINDER PETROL ENGINE TEST RIG

(MAKE : ISUZU – Used )

Engine: 10 HP at 1500 RPM coupled with loading device on a common base plate.

Engine panel : Ignition switch, Ammeter, oil pressure gauge, Bottle coil, Knife switches for MORSE TEST .

Panel : Burette for fuel consumption, ‘U’ tube manometer for air intake measurement, Digital Temperature indicator with selector switch, Digital Speed indicator for speed measurement.


2.Heat balance test 3.Morse test

With Rope brake dynamometer With Hydraulic dynamometer With Electrical dynamometer

With Eddy current dynamometerAbove test rig with brand new engine ( ISUZU make )

Above test rig with brand new engine ( MARUTI 800 make )

Rs. 1,35,500/-Rs. 1,97,600/-Rs. 1,85,900/-Rs. 2,07,500/-Rs. 1,47,200/-

Extra

Rs.1,20,200/-Extra

07. COMPUTERIZED DATA ACQUISITION OF SINGLE CYLINDER 4

STROKE DIESEL ENGINE COUPLED TO EDDY CURRENT

DYNAMOMETER

TECHNICAL DATA:

01. Make of Engine : Kirloskar

02. Type of Engine : 4 Stroke / Vertical

03. No of Cylinder : One

04. Type of Cooling : Water cooled

05. Rated Power : 5 HP

06. Rated Speed : 1500 RPM

07. Loading Arrangements : Eddy Current dynamometer

CONVENTIONAL MEASUREMENTS:

a) Fuel Intake : Fuel Tank / Burette / 3- Way Cock

b) Air Intake : Air Tank / Orifice Plate / Manometer

c) Temperature : Exhaust Gas Outlet temperature

and Ambient.

d) Speed : using digital tachometer

e) Load : using analog spring balance

DATA ACQUISITION

Fuel rate measurement using level sensor in turn with 0-5V

Flow sensor for air flow rate measurement in turn with pulse output

Proximity sensor for engine speed measurement in turn with pulse

output

Load cell/load indicator for load measurement with 0-250 V

Speed is controlled by engine governor

Different Temperature measurement using RTD/PT 100 Thermocouple

in turn with RS485 port

Flow sensor for water flow rate measurement in turn with pulse output

Temperature measuring using K type thermocouple in turn with 0-5V

Data logger : 8BIT, PIC 16F877A, Crystal 20MHZ, 3 Analog inputs, 4

digital inputs,Rs232 output (9Pin connector)

Hardware and Software for the above readable in LAB VIEW

Software: Customised LABVIEW software for single user.

EXPERIMENTAL CAPABILITIES:

BHP / TFC / SFC / Brake Thermal Efficiency, Volumetric Efficiency, Heat

balance sheet.

SERVICE REQUIREMENT:

5 amps Power Point

Computer with printer of latest version

Rs. 4,19,000/-

07a. COMPUTERIZED DATA ACQUISITION OF SINGLE CYLINDER 4

STROKE PETROL ENGINE COUPLED TO EDDY CURRENT

DYNAMOMETER

TECHNICAL DATA:

01. Make of Engine : Greaves


03. No of Cylinder : one

04. Type of Cooling : Air cooled

05. Rated Power : 3 HP

06. Rated Speed : 3000 RPM

07. Loading Arrangements : Eddy Current

dynamometer




c) Temperature : Exhaust Gas Outlet temperature

and Ambient.


e) Load : using analog spring balance

DATA ACQUISITION

Digital fuel rate measurement using load cell in turn with RS485 port

Pressure transmitter for air flow rate measurement in turn with RS485 port

Digital speed indicator for engine speed in turn with RS485 port

Digital torque indicator using cantilever load with RS485 port

Speed is controlled by engine governor

Different Temperature measurement using RTD/PT 100 Thermocouple in

turn with RS485 port

Hardware and Software for the above readable in excel


BHP / SFC / Brake Thermal Efficiency, Volumetric Efficiency


5 amps Power Point


Rs. 4,19,000/-

07b. COMPUTERIZED DATA ACQUISITION OF SINGLE CYLINDER 4

STROKE DIESEL ENGINE COUPLED TO HYDRAULIC DYNAMOMETER

Engine: 5 HP at 1500 RPM coupled with loading device on a common base

plate.

Panel : Burette for fuel consumption, ‘U’ tube manometer for air intake

measurement, Digital Temperature indicator with selector switch, Digital

Speed indicator for speed measurement.

TECHNICAL DATA:

01. Make of Engine : Kirloskar


03. No of Cylinder : one

04. Type of Cooling : water cooled

05. De-Rated Power : 5 HP

06. De-Rated Speed : 1500 RPM

07. Loading Arrangement : Hydraulic dynamometer




c) Temperature : Cooling water inlet, outlet temp, Exhaust Gas

Outlet temperature and Ambient.


DATA ACQUISITION

Digital fuel rate measurement using RS 232/USB Port

Pressure transmitter for air flow rate measurement using RS 232/USB Port

Digital speed indicator for engine speed using RS 232/USB Port

Digital torque indicator using cantilever load using RS 232/USB Port

Different Temperature measurement using Thermocouple with RS 232/USB

Port

Hardware and Software for the above readable in excel


BHP / SFC / Brake Thermal Efficiency, Volumetric Efficiency, MORSE Test,

Heat balance test.


5 amps Power Point


The above test rig with BRAND NEW Engine

Rs. 4,79,300/-

08. STEAM POWER PLANT [1 KW CAPACITY]

STEAM TURBINE ( 1 KW ) COUPLED WITH EDDY CURRENT

DYNAMOMETER, SEPERATING & THROTTLING CALORIMETER,

STEAM CONDENSOR & CONDENSOR COOLING WATER PUMP

ARRANGEMENT

OIL FIRED FULLY AUTOMATIC NON-IBR 300 Kg/Hr BOILER (WITH

CHIMNEY) WORKING AT 10 Kg/cm2 ALONG WITH WATER

SOFTNER COMBINED STEAM PIPING WITH ALUMINIUM FOIL

COVERED GLASSWOOL INSULATION

“THERMAX ( NON-IBR ) BOILER - BRAND NEW”

Installation and Commissioning Charges

Rs. 3,45,200/-

Rs. 6,20,600/-

Rs.1,42,700/-

01.

DYNAMICS LAB

CAM ANALYSIS APPARATUS

The machine facilitates the study of dynamic behavior of cam follower. It consists of a DC Motor coupled to an extension shaft whose and carries a cam. A cam follower, mounted on the end of a vertical bar, is loaded on the cam face by compression spring is retained by a cross bar mounted on two vertical pillars attached to the base plate. Facility is provided to vary the pre compression of spring. The inertia of follower can be altered using weights.

Rs. 33,800/-

02. MOTORISED GYROSCOPE

This is to demonstrate the relationship between applied torque and the rate and

direction of rotation. This is motorized and mounted on frames such that free to

rotate about three perpendicular axes. This facilitates to observe the laws of stability

and justification of equation. T-IwWp.

Specification:Rotor dia: 240 mm, thickness 10 mm Ac/ dc motor 1/12 Th hp

Digital rpm indicator Set of dead weightsDimmer to vary the speed

Rs. 39,200/-

03. WATT/PORTER GOVERNOR APPARATUS

The set up consists of a D.C. motor mounted vertically on a rigid base plate. The governor spindle also mounted vertically on same base plate with ball bearings, so it is to rotate freely .the spindle is driven by motor with belt and pulley system. The governor mechanism can be mounted on the spindle. Digital rpm indicator provided on the control panel to measure the speed of the spindle. The graduated scale is mounted to measure lift of the

mechanisms. The governor speed is increased in steps to give suitable sleeve movement. The readings are repeated at each stage, the can be plotted as curves of speed against sleeve position. The following experiments can be performed: (using Watts / porter governor)a) The effect of varying mass of the center sleeve.b) The effect of varying the rotating mass.c) Determination of characteristic curves of sleeve position against speed

of rotation.d) The effect of varying the initial spring compression. Rs. 45,500/-

03a. PROELL AND HARTNELL GOVERNOR APPARATUS

The set up consists of a D.C. motor mounted vertically on a rigid base plate. The governor spindle also mounted vertically on same base plate with ball bearings, so it is to rotate freely .the spindle is driven by motor with belt and pulley system. The governor mechanism can be mounted on the spindle. Digital rpm indicator provided on the control panel to measure the speed of the spindle. The graduated scale is mounted to measure lift of the mechanisms. The governor speed is increased in steps to give suitable sleeve movement. The readings are repeated at each stage, the can be plotted as curves of speed against sleeve position. The following experiments can be performed: (using Proell & Hartnell governor)a) The effect of varying mass of the center sleeve.b) The effect of varying the rotating mass.c) Determination of characteristic curves of sleeve position against speed

of rotation.d) The effect of varying the initial spring compression.

Rs. 45,500/-

04. WHIRLING OF SHAFT APPARATUS

This compact and simple apparatus incorporates two features. Firstly, kinematics coupling at the driven and of the shaft to slide freely in longitudinal direction while revolving readily. An interchangeable chuck without self-aligning radial ball bearing achieves the directional clamping of this end of the shaft. The shaft is driven through a dynamically balanced flexible coupling by a universal motor, the speed of which can be controlled by a control unit. The speed of rotation of the shaft can be measured by a stroboscope (not in scope of supply). Digital rpm indicator can be also used for speed measurement of coupling. The following shafts made from steel will be supplied.

Dia (mm) Length (mm) 3 1000 approx. 4

1000 approx 6 1000 approx. One Kinematics coupling and bearing for fixed or fee end. One sliding chuck for fixed end with lateral movement.

Power requirement: 220 V, 50 Hz Single Phase. Range of experiments: Investigation of various modes of whirl for shafts with: Rs. 41,900/-

05. STATIC AND DYNAMIC BALANCING MACHINE

This Is Suitable For Conducting Experiments On Static Balancing And Dynamic

Balancing With Different Weights. This Consists Of Rectangular Frame Of Steel Perfectly Balance With Four Different Blocks. A Protractor Scale Of The Disc Is Provided To Reach Exact Angular Position Of Each Angular Position Of Each Weight To Be Measured. A Linear Scale Provided Below The Frame Provides The Measurement Of Each Weight Along The Shaft. The Unit Is Hanging From A Rigid Steel Frame Through Chain For Dynamic Balancing And Can Be Fixed Rigidly For Static Balancing.Experiments:

Static balancing of the system using a moment polygon construction Dynamic balancing by calculating the position of the weights along the shaft, By

resolving and taking moments about one end shaft.Rs. 39,200/-

06. Vibrating table Rs. 46,400/-

07. Vibration test facilities apparatus Rs. 39,200/-

08. Kinematics of Gear Trains models

Simple gear models

Compound gear models

Differential gear models

Epicyclical gear models

Kinematics of Gear Trains - Experimental

simple gear traincompound gear train

Differential gear train epicyclical gear train

Rs. 25,700/-

Rs. 43,700/-Rs. 48,200/-Rs. 96,800/-Rs. 76,100/-

09. Kinematics of 4 bar mechanisms

Models:

Slider crank MechanismDouble crank Mechanism

Crank Rocker Mechanism

Double Rocker Mechanism

Kinematics of 4 bar mechanisms - Experimental

Slider crankCrank Rocker Mechanism

Rs. 25,700/-

Rs. 35,600/-Rs. 42,800/-

TERMS & CONDITIONS

PRICE : Ex - Works.TAX : CST @ 5 % EXTRA. PAYMENT : 50% Advance along with order, 40% against delivery at our works & Balance 10 % On demo.DELIVERY : 14 - 16 Weeks.GUARANTEE : 12 Months.VALIDITY : 30 Days.DISCOUNT : Negotiable.TECHNICAL -SPECIFICATIONS : We reserve rights to make any changes and also to introduce any

developments .

For Mech-Lab Equipments(India) Pvt.Ltd.

P.Anand,

09443736743.

Thermal Quot

Documents

Transcript of Thermal Quot