Thermal oil pump
-
Upload
honghai-pump-co-ltd -
Category
Technology
-
view
144 -
download
0
Transcript of Thermal oil pump
Honghai Thermal oil pump
1. Simple structure
2. Good performance
3. Reliable operation
4. High-temperature
5. Small volume, save cost
Brief Introduction
This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which
is able to resist higher temperature. It adapts high technology and works high efficiency.
Under high temperature, it’s able to work steadily without any leakage. As well, water
cooling system is more safe and reliable.
This water-cooled thermal oil pump is scientific-constructed, mainly for conveying liquids
with high temperature, below 350℃ is acceptable. It’s suggested to transport weak
corrosive fluid without any solid particles. Honghai Thermal oil pump is an ideal circulating
pump.
As for the corrosion resistance ability and temperature, the material of the relevant spare
parts determines.
Capcacity: 1-500m3/h
Temperature: -20℃-350℃
Head: 10-125m
Theory: Centrifugal Pump
Feature
1. Honghai water-cooled thermal oil pump is the second generation thermal oil pump
based on the overseas water-cooled thermal oil pump. The basic structure is single grade
cantilever type.
2. It’s double end ball bearing supporting. The former end adapts lubricating oil, and the
latter end uses grease. In the middle, there is an oil guiding pipe for the purpose of
observation of sealing situation and recycle the thermal conductive oil.
3. It adapts self-thermal dissipation structure, which changes the traditional construction
and enables simple structure, small volume, cost saving, and reliable working.
4. PTFE, the third generation of Polytetrafluoroethylene is used for lips sealing, which
greatly improve the sealing property, about 25 times reliable than the rubber sealing.
The materials contacting the liquids are mainly 1.HT200;II.ZG230-450;III.1Cr18Ni9Ti,
OCr18Ni12-Mo2Ti.
Application
Now you can see that Honghai thermal oil pumps are widely used in many areas like
petrol, chemistry, rubber, plastics, pharmacy, textile, printing and dyeing, food and road
construction.
To be specific, please check below:
1. Petroleum Industry
2. Chemical Industry
3. Pharmacy and Health
4. Environmental and Water treatment
5. Electroplating industry
6. Environmental protection
7. Food service industry
8. Printing and dyeing area
9. Textile industry, etc
Technical Data
Model Capacity
m3/h
Lift
m
Speed
r/min
Power kw Efficiency
η% Motor-Y Shaft
power
Power
Distribution
15-15-100 3 10 2800 0.45 0.75 20 801
15-15-100A 2 10 2800 0.36 0.55 18 AO2-7122
15-15-100B 1 10 2800 0.2 0.37 15 AO2-7112
20-20-100 1 10 2800 0.09 0.37 26 AO2-7112
20-20-125 1.5 22 2800 0.22 0.75 30 801
40-25-160 10 28 2900 1.72 2.2 45 90L
25-25-160 3 27 2900 0.53 1.5 30 90S
32-32-160 6 28 2900 0.85 1.5 50 90S
50-32-160 12.5 30 2900 1.90 3.0 57 100L
Honghai Pump can be used in different areas, so there are bitumen pump, sanitary pump,
food pump, hot oil pumps, fuel pump, fuel gear pump and diesel pump. Feel free to
contact us.