There are three elements to exposure: ISO, aperture, and shutter.
Embed Size (px)
Transcript of There are three elements to exposure: ISO, aperture, and shutter.
There are three elements to exposure: ISO, aperture, and shutter.ISO in digital cameras is the measure of the digital sensors light sensitivity; in film cameras it is the film speed.Aperture is the hole in the lens that allows light through. The larger the hole, the less depth of field you will have. Aperture is measured in F-Stops, where the smaller the number, the bigger the opening.Shutter speed is how fast the shutter opens and closes to create an image. The longer it is open, the more light that is let into the lens.
Units called Kelvin are a standard method of describing colour temperatures in any situation.The warmer the colour looks, the lower its number on the Kelvin Scale
The process of removing unrealistic color casts so that objects which appear white in person are white in a photoProper camera white balance has to take into account the "color temperature" of a light source, which refers to the relative warmth or coolness of white light
TYPES of LIGHT
The available natural light completely surrounding a subject. Light already existing in an indoor or outdoor setting that is not caused by any illumination supplied by the photographer i.e. not by artificial light source.
Light from a man-made source, usually restricted to studio photo lamp and domestic lighting.
Lighting that is low or moderate in contrast, such as on an overcast day.
Light that is shown on the subject could be natural or artificial.
Light that is bounced into a scene.
Above left right and bottom, and backlit.
The main difference between straight and artistic lighting is mood. Mood-setting moves beyond technical photo terms and into creative light design. It's not hard to do if you know how to control three basic lighting components: key, contrast and color. First you need to be clear about exactly which mood you're after: sunny, dreamy, desolate, scary, etc. For instance, midnight lighting is equally dark, blue and contrasted for both strolling lovers and lurking vampires.
Hard Light: You create hard lighting primarily with a spotlight type source. The outcome of the light is highly directional and the light rays are almost parallel. Because the light beams are somewhat parallel, they can be interrupted by lighting equipment like a barn door or a flag (a large black rectangle held in place by a stand). This creates a relatively sharp, straight shadow where the light path is interrupted.
Soft Light: All soft light sources are large, ranging from somewhat large to extremely large and their light is not aimed by anything precise. Soft light is a light that gives the illusion of wrapping around the object of focus, and it creates a very soft edge. Soft light depends on 2 main factors; distance and the size of the light source. The closer and larger the light source, the softer the edges. The softness of the light can also be depicted on the angle of the light. The larger the angle, the softer the light.
Snoots - metal cylinders with open ends, usually painted black, are used to limit the size of the circular area projected. Short, wide snoots give a large circle of light; long, narrow snoots give a small circle of light.
Umbrellas - working as reflectors on flood lights, they convert harsh light into soft, diffused light. Metalized umbrellas throw a somewhat directional light, but the light is softer and spread over a larger area than the light emitted by the original light source.
Diffusers - similar to umbrellas, these are made of translucent or mesh materials that, when placed in a light beam, break up or diffuse and soften the light.
Barn Doors - made for spotlights and floodlights, these accessories can be positioned to block or feather a portion of light.
Lens Hoods - these prevent lens flare from happening, which happens when a direct light source, such as sun or strobe, is present.
Built into the cameraSmall and not very powerfulPoint light sources, which means a very harsh light qualityAdequate light for 15 feet
More powerful and used for bigger distancesColour temperature is the same colour of daylights temperatureHas ability to tilt and swivel which gives it flexibility bouncing the light from the flash
Cameras can continuously measure the light reflecting from a subject This reading can help to automatically set a shutter speed and aperture for the correct exposure in that lighting situation when you press the shutter button halfway down
There are three directions of light:Front Lighting - when the sun is behind the photographer; this often makes the photo appear flattened, doing nothing to bring out detail or show depthBack Lighting - when the sun is in front of the photographer; this technique is suggested when shooting people, as it reduces the amount of squinting, as well as when shooting silhouettesSide Lighting - when the light is coming from any direction other than directly in front or behind of the photographer; often emphasizes texture and form
When shooting outdoors, you must pay special attention to the lighting since you cant control it. You must position your subject according to the direction of light, so that the subject doesnt appear washed out and to prevent unwanted shadows.
Back LightFront LightSide Light
If the light is bright and sunny and comes directly through the window, the amount of contrast can be difficult, but not impossible to deal withIf the window is in the shade, light can make great portrait and interiors, but the amount of light is limited Two types of light can come through a window: direct (hard) and diffused (soft)
Tungsten light bulbs are very warm and can be used in many situations but are limited because of their relative low light outputWhen shooting in incandescent lighting, setting the white balance to incandescent will add a blue filter to the images to get a truer colour
Appears very green in colour to the digital sensorWhen white balance is set to fluorescent, it adds a magenta filterIt is very common in public buildings
Portrait photography can be more difficult than other types because the subject is not still expressions are always changingGenerally, a larger aperture (smaller number) is used to get a sharp subject and blurred backgroundA large aperture also good for faster shutter speed because more light is let into lens - important for kids especiallyThe Aperture Priority setting is a good choice for portraits so you can always have a shallow depth of field - just make sure light doesnt get too low or else the shutter will be too slow to be focused without a tripod!
Direct sunlight can create shadows under the eyes and across the faceLook for open shade, for example, the shaded side of a building In open shade, people are less likely to squint and light appears more diffusedKeeping subjects at the edge of the shade shows light direction and keeps texture in the faceIn mottled sunlight, be sure that deep shadows dont fall over the face
Models can move, and sunlight is always moving; always monitor your lightOvercast days can work because it creates a soft overhead lightIf no shade is available, you can turn subjects so the sun is behind them, but that can cause bright areas on head and shouldersShade the lens to prevent lens flareMeter light around the face or else the face may turn out too dark
Use a reflector to bring light into shadows (a piece of white cardboard, a light coloured shirt, a commercial reflector, etc.)Flash can be used even in situations where light is sufficient to even out the exposure and add sparkle and shine to hair and eyesOn an overcast day, set white balance to cloudy to give a warm toneUsing black and white and a bit of fill flash can be good in overcast situations
PanningWhen you move your camera to follow a moving subject while taking a photoThe result is your subject in focus and the background blurred to show motion
Landscape LightingBring a tripod even on a sunny day you'll want to have a deep depth of field (a smaller hole for light to get through) which means you'll need a longer shutter speedA polarizer can take glare off water and other reflective surfaces, and filters that fit over your lense can increase contrast and even out exposure
Night LandscapesA tripod is a necessity to reduce blur nighttime photography calls for slow shutter speedsA flashlight can be used to allow enough light to focus in on the scene before taking the pictureRear curtain flash can be used as it goes off at the end of a long exposure and can add extra light