Commercial and Industrial CoolingWorld-leading natural cooling technology

NEW IN 2014!

Why evaporative cooling?Take the natural approach to cooling! Seeley International’s Breezair range of evaporative coolers deliver lots of cool, 100% fresh air, at much lower costs than refrigerated cooling methods.

Evaporative cooling is the only viable option for cooling large areas. A Breezair system uses up to 80% less energy than a refrigerated cooling system. And, doors and windows can be left open, with absolutely no loss of cooling efficiency.

Breezair evaporative air conditioning:

Is more energy-efficient and cheaper to run when compared to a standard efficiency ducted refrigerated system!

Delivers 100% fresh air

Is easier and cheaper to install

Improves productivity through fresh, clean air (less chance of Sick Building Syndrome or other air-borne problems)

Is healthier for the environment – drastically reduced power use, no harmful emissions and no synthetic refrigerants

Is easier to maintain.

Why Breezair?For more than four decades, Seeley International’s brands have been synonymous with leading-edge technology, innovative design and superior cooling performance, in addition to outstanding product reliability and ease of maintenance.

Seeley International’s dedication to innovation through the highest standards of research, engineering and manufacture, as well as our commitment to excellence in customer service, all combine to deliver the best possible cooling systems at the best possible price.

Seeley International’s latest cooling innovation Breezair EnviroMagic

Breezair EnviroMagic has been specifically designed for cooling large industrial buildings at a fraction of the conventional cost of power. It features a range of benefits:

Efficiency

Breezair EnviroMagic is like no other evaporative cooler. Designed using computer modelling to optimise efficiency and performance, it delivers up to 28,650 m3/h @ 80Pa duct pressure, and uses our state-of-the-art inverter motors.

In a world-first approach, the Breezair EnviroMagic uses high-efficiency axial fan modules in conjunction with venturis and turning vanes to reduce cooler power consumption and minimise noise. Fan modules are inclined to improve airflow through the cooler.

The inverter motor technology delivers greatly increased operating efficiency, particularly at lower speeds, which means remarkably reduced seasonal running costs.

Breezair EnviroMagic can be used in two different modes.

COOL MODE: The watering of the pads occurs in one of the three sections on a cyclical basis. The fan speed reduces as each section is watered and increases as the cycle moves on. The resultant output is a running average of the fan speeds.

VENT MODE: Without the water supply, the fans work continuously, without slowing, to achieve maximum airflow output.

Convenience

Because it’s lighter than other industrial coolers, Breezair EnviroMagic is easier (therefore, cheaper) to install. It’s also perfect for roof structures that are unable to support the weight of large metal commercial coolers. Thanks to its flexible design, Breezair EnviroMagic can be easily disassembled for handling and quickly reassembled by installers, if necessary. And, its lower centre of gravity makes it much easier to lift and manoeuvre on a roof.

Designed to look good

The ultra-low-profile styling means Breezair EnviroMagic can seamlessly integrate with any roofline. This is perfect where the building zoning regulations require roof mounted equipment and services to be located behind parapet walls.

Regulatory Compliance

Breezair EnviroMagic is designed to meet CE and UL approval requirements.

Permatuf Corrosion-proof Cabinet

The Breezair cabinet will not corrode or rust. The UV stabilized structural polymer material is the same type used to make acid baths, battery cases and some space satellite components. Plus, it’s designed to blend with any property.

Thermostat Control

The Breezair range features a thermostat for fully-automatic control.

Breezair’s TBA, Icon and EnviroMagic feature advanced technology and a range of unique and clever design features that combine to achieve the highest cooling performance of any comparable cooler.

AQUAFlow

Breezair’s AQUAFlow non-clogging water distributor is one of the many features that make it unique. The water distributor maximises cooling efficiency by supplying a continuous and balanced flow of water across the cooling pads. This is different to any other brand of evaporative cooler, which are subject to water flow variations for a number of reasons. Breezair’s balanced flow delivers the highest possible evaporation efficiency and maximum cooling.

ChillCel High Efficiency Pads

With strong, long-lasting Chillcel pads that last for up to seven years, maintenance is easy. Chillcel pads are made from organic paper materials that are cleverly manufactured into honeycomb panels that have outstanding structural and cooling strength. They are easy to clean and replace, when necessary. Seeley International has manufactured Chillcel pads (90 mm thick) specifically to achieve optimum performance in evaporative coolers, and, they have a proven track record. Clean and Dry Function

The cooler drains automatically when it’s not in use, preventing algae growth and maintaining a clean cooler.

Digital Smartbox / Control Power Module

A state-of-the-art digital electronic control delivers optimum performance. The Smartbox digital control module monitors and controls all of the air conditioner’s features to provide ultimate comfort conditions, temperature sensing and water quality supervision – safely and reliably. The module also incorporates diagnostic features and memory to aid troubleshooting and minimise downtime. Several user choice parameters are available to allow users to set up their preferred environment.

In addition to the clean and dry function, the Natural Chlorinator is offered as an optional accessory for Breezair EnviroMagic. The Natural Chlorinator keeps water healthy and extends the life of evaporative media.

The thermostatic control for Breezair EnviroMagic automatically adjusts the building temperature and prevents running the cooler when not necessary, reducing energy and water consumption.

The Breezair EnviroMagic cooler features two watering channels for each pad to achieve maximum pad saturation.

The Breezair EnviroMagic light weight polymer external structure and stainless steel internal structural components are made from corrosion-resistant material.

The Breezair EnviroMagic Chillcel high performance pads are almost twice as thick (112 mm), compared to standard commercial pads (60 mm).

EnviroMagic

IconTBA

TBA

Icon

EnviroMagic

WATERManager System

The Breezair WATERManager ensures optimum machine life with minimum maintenance by constantly checking water quality. As the water in the air conditioner evaporates, it leaves behind impurities and salts, which can become deposited on the cooling pads, resulting in reduced cooling power. The WATERManager senses water quality with a probe that sends a signal back to the electronic module, which then ejects some water and allows fresh water to enter.

The WATERManager in EnviroMagic has been enhanced with an additional probe to handle the water management requirements of this innovative cooler. The Breezair EnviroMagic electronic probe maintains correct water levels in the unit at all times.

EnviroMagic drain valve

TBA and Icon drain valve

2 3

Why is Breezair Unique?

Breezair’s exclusive world-class features

25 Years Corrosion-free

cabinets guarantee

10 Years Structural

components guarantee

2 Years Pump, motor

& electronic control module guarantee

Smart Hub Industrial Wall ControlThe Smart Hub is used to enable multiple Breezair variable speed air coolers to be controlled from one wall control. When used with “Industrial Wall Control” (IWC) the Smart Hub provides Evaporative Cooler fault information to the wall control display.

The IWC can handle up to 10 smart hubs and control up to 41 Breezair coolers. The IWC identifies any faulty cooler in a group and provides comprehensive fault diagnostics enabling any cooler in a multi cooler installation to be quickly identified and repaired. The IWC10 may also be set up to control Breezair cooler from EXTERNAL devices, such as PLCs and Building Management Systems (BMS).

Operate multiple coolers from a single wall controller

Ambient Relative Humidity %

10 20 30 40 50 60 70 80 90

Ambi

ent D

ry B

ulb

Tem

pera

ture

°C

10 2.6 3.5 4.4 5.3 6.1 6.9 7.7 8.5 9.3

15 5.9 7.1 8.2 9.3 10.4 11.4 12.3 13.2 14.1

20 9.2 10.6 12.0 13.3 14.6 15.8 16.9 18.0 19.0

25 12.3 14.1 15.8 17.3 18.8 20.2 21.5 22.7 23.9

30 15.4 17.5 19.5 21.3 23.0 24.6 26.1 27.5 28.8

35 18.4 20.9 23.3 25.4 27.3 29.1 30.7 32.2 33.7

40 21.3 24.3 27.0 29.4 31.6 33.5 35.3 N/A N/A

45 24.3 27.8 30.8 33.5 35.9 38.0 N/A N/A N/A

50 27.2 31.2 34.6 37.6 N/A N/A N/A N/A N/A

55 30.1 34.7 38.5 N/A N/A N/A N/A N/A N/A

This chart represents approximate air temperatures based on 87% saturation efficiency at sea level. From tests carried out to Australian Standard 2913.

Cooler Discharge Air Temperature Chart

Model# A B C D E* F G H I J K L* M N O

EXH 150 860 1160 1160 1108 555 109 38 182 81 274 118 555 834 38 84

EXH 210 860 1160 1160 1108 555 109 38 182 81 274 118 555 834 38 84

Note: All dimensions are in mm. *Dropper dimensions

CABINET DETAILS

Optional Accessories for TBA and Icon

Model#Industry STD Rating

m3/h @ 80PaMotor

W

Certified Air Delivery (m3/h) (static pressure Pa)

0 40 80 120 160 200

TBA 550 10744 950 12203 11475 10744 9818 8687 -

EXH 150 6994 550 8190 7606 6994 6294 5630 4939

EXH 210 10084 1500 10547 10316 10084 9797 9443 8765

FAN CURVES

Airflow (m3/h)

4000 6000 70005000 8000 9000 10000 11000 12000 13000 14000

Sta

tic

pres

sure

(P

a)

0

40

80

120

160

200EXH 150

TBA 550

EXH 210

Model# A B C D E* F G* H I J K

TBA 550 1150 1150 835 1080 555 250 555 275 95 82 82

Note: All dimensions are in mm. *Dropper dimensions

Technical Specifications

TBA 550 EXH 150 EXH 210Airflow @ 80Pa Industry standard (m3/h) 10744 6994 10084Cooling capacity* (kW) 14.7 9.9 15.7Power consumption (total)

Watts max / min 1300 / 400 860 / 70 2145 / 70Current max (amp) 6.0 3.6 9.0

Power supply Voltage / Phases / Hz 230 / 1 / 50 230 / 1 / 50 230 / 1 / 50Controller

Type DigitalVariable speed inverter

Variable speed inverter

Fan Type Axial Centrifugal CentrifugalDia x width (mm) N/A 460 x 380 460 x 380

Motor Type PSCDirect drive inverter

Direct drive inverter

Variable speed range (rpm) 600 to 1350 170 to 500 170 to 613

Output Watts max / min 950 / – 550 / 60 1500 / 60

Overload & Fuse Auto reset & ‘one shot’ fuse

Manual reset Manual reset

Enclosure IP 24 IP 2X IP 2XPump Type Centrifugal Centrifugal Centrifugal

Motor Synchronous Synchronous SynchronousRating Watts (input) 25 25 25Flow rate (L/min) 21 21 21Voltage / Phases / Hz 230 / 50 230 / 50 230 / 50Overload Auto reset Auto reset Auto resetEnclosure rating IP X4 IP X4 IP X4

Cooling pad Chillcel

Size (mm) 850 x 525 (H) x 90 (4 pads)

800 x 635 (H) x 90 (4 pads)

800 x 635 (H) x 90 (2 pads)

800 x 635 (H) x 100 (2 pads)

Pad area (m2) 1.80 2.05 2.05Water Tank capacity (L) 23 11 11

Inlet (mm / inches) 12.7 / ½ male BSP 12.7 / ½ male BSP 12.7 / ½ male BSPDrain (mm / inches) 40 / 1½ male BSP 40 / 1½ male BSP 40 / 1½ male BSP

Shipping Dimensions including pallet (mm)

1150 x 1150 x 902 (H)

1160 x 1160 x 975 (H)

1160 x 1160 x 975 (H)

Volume (m3) 1.2 1.31 1.31Mass (kg) 66 77 78Operating (kg) 89 84 85

Connecting duct(raw edged)

Length x width (mm) 550 x 550 550 x 550 550 x 550

*Cooling capacity measured to Australian Standard AS2913-2000, ambient of 38°C dry bulb & 21°C wet bulb, with room exit temperature of 27.4°C.

I

C

D

E

F

H

G

B

J

K

L

M

A

Waterconnection

Water drain

Electricalentry

(knockout)

O

N

ILL1682-A

I

Water drain

Waterconnection

Electricalentry

K

A

B

C

J

H

E

DF

G

EnviroMagic

Three Axial Fans

Breezair EnviroMagic uses high-efficiency and super powerful axial fan modules in conjunction with venturis and turning vanes to reduce cooler power consumption and minimise noise. Fan modules are secured on an incline to maximise airflow through the cooler.

Three 3Phase Inverter Drive Totally Enclosed Motors

Breezair EnviroMagic’s unique three phase inverter drive motors are fully enclosed and designed to international standards. They enable efficient variable speed control, minimising power usage and increasing efficiency.

Three Super High Capacity Water Distribution Pumps

Three super high capacity water distribution pumps are reliable, durable and built to last!

Air Pressure Sensor

The effective air pressure sensor delivers constant airflow in order to maximise the output of Breezair EnviroMagic at all times.

TBA

Axial Fan

The better the fan, the more efficient the system. This super powerful fan is designed to maximise performance and minimise noise. These purpose designed fans are inherently balanced, with aerofoil blades to provide energy efficient, high pressure performance.

Totally Enclosed Motor

Breezair’s fan motor is fully enclosed to international standards and excludes any moisture ingress from all sources. The advanced design is rigorously tested and completely reliable.

Icon

Centrifugal Fan

Centrifugal fans are the first choice of air conditioning engineers worldwide. The Breezair forward curved, centrifugal fans are made from injection-moulded polypropylene. They are double-width, inherently statically and dynamically balanced, with aerofoil blades to provide high pressure performance and very low noise levels.

HushPower Direct Drive Motor

Exclusive to Breezair, this motor is super-efficient and electronically controlled for optimum efficiency. Corrosion resistant, it’s the quietest motor available and has unsurpassed reliability, reduced energy use and runs at variable speeds.

TBA and Icon

Tornado Pump

The perfect pump for the job! The Tornado pump is built to last. Designed, manufactured and tested by Seeley International, the Tornado pump epitomises reliability. It features very safe material choices, an encapsulated motor with overload cut-out, stainless steel shafts and bearings fully protected from water. Plus, it has a clever impact-start feature that will overcome any tendency for the pump to become locked up with residue during prolonged off periods. The strong synchronous motor has constant speed, independent of voltage.

AUTOWeatherseal

The AUTOWeatherseal closes the duct automatically – stopping convection currents in winter from allowing cold air to enter, or heat to escape. When the fan is off, the Breezair AUTOWeatherseal shuts and blocks those air currents. The result – a more comfortable environment in winter and no need to add covers during the off season.

4 5

Model Specific Unique Features

Technical Specifications TBA and Icon

VENT MODE

COOL MODE

ModeIndustry STD Rating

m3/h @ 80PaMotor

W

Certified Air Delivery (m3/h) (static pressure Pa)

0 40 80 100

COOL MODE 28650 1500 31000 30000 28650 27550

VENT MODE 31900 1500 35000 33550 31900 31000

FAN CURVES

Airflow (m3/h)

26000 27000 28000 29000 30000 31000 32000 33000 34000 35000 36000

Sta

tic

pres

sure

(P

a)

0

40

20

60

80

100

120

140

Ambient Relative Humidity %

10 20 30 40 50 60 70 80 90

Ambi

ent D

ry B

ulb

Tem

pera

ture

°C

10 2.6 3.5 4.4 5.3 6.1 6.9 7.7 8.5 9.3

15 5.9 7.1 8.2 9.3 10.4 11.4 12.3 13.2 14.1

20 9.2 10.6 12.0 13.3 14.6 15.8 16.9 18.0 19.0

25 12.3 14.1 15.8 17.3 18.8 20.2 21.5 22.7 23.9

30 15.4 17.5 19.5 21.3 23.0 24.6 26.1 27.5 28.8

35 18.4 20.9 23.3 25.4 27.3 29.1 30.7 32.2 33.7

40 21.3 24.3 27.0 29.4 31.6 33.5 35.3 N/A N/A

45 24.3 27.8 30.8 33.5 35.9 38.0 N/A N/A N/A

50 27.2 31.2 34.6 37.6 N/A N/A N/A N/A N/A

55 30.1 34.7 38.5 N/A N/A N/A N/A N/A N/A

This chart represents approximate air temperatures based on 87% saturation efficiency at sea level. From tests carried out to Australian Standard 2913.

Model# A B C D E F G

ENVIROMAGIC 2150 363 599 328 1935 400 80

Note: All dimensions are in mm

CABINET DETAILS

ENVIROMAGICAirflow    m3/hr @ 80Pa (COOL MODE) 28,650

m3/hr @ 80Pa (VENT MODE) 31,900

Power supply                             Voltage / Phase / Hz 380-480 / 3 / 50-60

Current (amp) 10A per Phase

Controller               Type   Variable speed

Fan x 3 Type   Axial

Motor x 3                     Type Inverter – variable speed

Speed max (rpm)                                        1550

Rating (Watts)                                            1500 each

Current (amp) 8A per Phase

Voltage / Phases / Hz 380V-480V / 3 / 50-60

Overload Auto reset

Pump x 3                                   Type   Uni directional

Motor     2 Pole

Rating Watts (input) 128 each

Flow rate (L/min) 40

Voltage / Phases / Hz 220V-240V / 1 / 50-60Hz

Cooling pad Chillcel Size (mm)                                                  593 x 570 x 112 x 9 pads

Pad area (m2) 3.04

Water    Tank capacity (Litres)                                  48

Inlet (inches) 1/2" male BSP

Shipping Dimensions (max outer dims in mm) 1935 x 2150 x 890 (H)

Mass (kg) 210

Operating (kg) 258

Connecting duct(raw edged)

Length x width (mm) 800 x 800

*Cooling capacity measured to Australian Standard AS2913-2000, ambient of 38°C dry bulb & 21°C wet bulb, with room exit temperature of 27.4°C.

Cooler Discharge Air Temperature Chart

Technical Specifications Breezair evaporative cooling is suitable for a large range of commercial and industrial applications, such as:

Automotive industry

Shops & commercial centres

Agricultural facilities

Warehouses

Animal facilities

Textile industry Printing

Car dealers Food industry

Sporting centres Animal and breeding facilities

Bars & restaurants

Factories Educational facilities

Laboratories

• warehouses

• repair and maintenance areas

• sports centres

• institutional facilities

• manufacturing plants

• storage areas

• laundries and dry cleaners

• commercial kitchens

• agricultural facilities

• farm buildings – dairy, poultry and stables.

In fact, over quarter of a million commercial and industrial installations have been installed worldwide, and the number is continually growing.

6 7

Technical Specifications EnviroMagic

Applications

WATER INLET

WATER INLET

DRAIN OUTLET

DRAIN OUTLET

DRAIN OUTLET FROMCENTRE OF COOLER

POWER AND COMMUNICATIONSCABLE ENTRY AREA CENTRE

POWER AND COMMUNICATIONSCABLE ENTRY AREA CENTRE

PLUMBING TUBELARGE

PLUMBING TUBESMALL

PLUMBING TUBEMEDIUM

WATER INLET

BOTTOM VIEWA

B

CD

F

E

G

SEELEY INTERNATIONALSeeley International is Australia’s largest air conditioning and ducted gas heating manufacturer and a global leader in developing ingenious, energy-efficient cooling and heating products.

Our vision is to lead the world in creating climate control solutions which continue to be highly innovative, of premium quality and inspirational in their delivery of energy-efficiency.

But it’s more than just a vision... it’s a way of life!

A commitment to innovation and excellence is at the heart of all that we do. Our success in delivering on that commitment has been recognised by our many awards and our expanding global presence. Seeley International now exports to more than 120 countries. Not bad for a company that started out in 1972 in the garage of its founder and Executive Chairman, Frank Seeley AM FAICD, who was named South Australian of the Year for 2011!

Cat

No

BO

76

1 R

EV

A

Email eurosales@seeleyinternational.com Web seeleyinternational.com

Seeley International France

320 Avenue Berthelot 69371 Lyon Cedex 08 France

Phone +33 (0)4727847 80 Fax +33 (0)478 7440 74

Seeley International (Europe) Limited

Hucknall Business Centre 5 Papplewick Lane, Hucknall, Nottingham UK NG15 7TN

Phone/Fax +44 (0) 115 963 5630

Seeley International Europe (Italy)

Via Rigutino est, 194 52100 Rigutino (AR) Italy

Phone +39 0575 97189 Fax +39 (0)575 1949971

Quality ISO 9001