The Study and Modeling of Adsorbed Regenerator Plate Material Kelsey McCusker.
4
The Study and Modeling of Adsorbed Regenerator Plate Material Kelsey McCusker
-
Upload
elizabeth-gray -
Category
Documents
-
view
220 -
download
1
Transcript of The Study and Modeling of Adsorbed Regenerator Plate Material Kelsey McCusker.
Objectives
• Successfully model the steady state process of the regenerator to determine the efficiency of the new design and material
• Investigate the complicated heat transfer between fluid and material to produce an effective resistance on a per plate basis
Methodology
• Develop a 2-D transient MATLAB model to predict the heat transfer flow path through the plate.• Use this specific model to generalize each plate and fold the results
into a larger transient model following the fluid and regenerator temperature nodes through each blow process over time.