The Safe Transfer of Pressurized Gas. Collect the Necessary Tools and Equipment Safety Glasses for...

18
The Safe Transfer of Pressurized Gas

Transcript of The Safe Transfer of Pressurized Gas. Collect the Necessary Tools and Equipment Safety Glasses for...

The Safe Transferof

Pressurized Gas

Collect the Necessary Tools and Equipment

• Safety Glasses for EVERYONE• SCUBA Tank filled to 3000 psi• Fill Station • Storage Tank and Regulator • Adjustable Strapping

SCUBA Tanks

Portable

Readily Available

Inexpensive

Lightweight

•SCUBA Certification

•Limited Capacity

Fill StationsThis is a commercially available fill station manufactured for paintball enthusiasts.

Fill StationsThis is a custom built fill station fabricated by a local welding supply company from off the shelf parts.

Note: All parts rated at 3000 psi

Tank and RegulatorThis is a 47ci Aluminum paintball tank with an Air America Tobor™ regulator that has been modified to conform to the BBIQ Technical Rules and Regulations

Before Every Fill…

• Put on Safety Glasses• Check the Valve and O-ring on the SCUBA Tank.

Replace defective O-Rings. Do not use a tank with a damaged valve surface.

Be SafeInspect the Equipment Every TimeAll the Time

Prevent Serious Accidents

Always Secure High Pressure Storage Bottles to Rigid Structures

A Busted Valve Will Turn This Tank Into a Rocket Capable of Piercing the Wall of a Building.

Attach the HPA Storage Tank to the Fill Station

Check the HPA Storage Tank Fittings for Visible Damage

Be Certain the HPA Storage Tank Valve is Closed

Respect the Quick Connect

Make certain the connection is secure and the male and female ends have engaged.

Test the connection by tugging on the tank

Ready To FillCheck the Setup

Check the Gages

Check the Connections

Fill the Tank S-L-O-W

Slowly Open the Valve on the SCUBA TankWatch the GagesFeel the Tank TemperatureTake Your Time

CAUTIONFollow This Procedure to Remove

the Tank

1.) Close the SCUBA Tank Valve

Note: The Fill Station and Tank connection will remain pressurized

2.) Open the Fill Station Bleed Valve

Note: The Tank does not empty because the male Quick Connect fitting is a one way check valve.

CongratulationsYou now have approximately 10 Watt Hours of energy available.

Be a great engineer.

Use it wisely.

Low PressureApprox. 1Mpa High

Pressure2200 psi