The Right Wire Protection Solution for Every Shipboard ......Every Shipboard Application Glenair...

Con

duit

Syst

ems

F-1GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912

© 2002 Glenair, Inc. Printed in U.S.A.CAGE Code 06324

www.glenair.com E-Mail: [email protected]

M24758 Flexible Waterproof EMI/EMPConduit and End Fittings

General Information

The Right Wire Protection Solution for Every Shipboard Application

Glenair offers a wire protection solution for every shipboard requirement. Our compre-hensive MIL-C-24758 conduit product line provides complete compatibility with virtually every type of electrical connector and intercon-nect system and can be supplied completely wired and terminated - ready for use - or as component elements. A complete range of fittings, transitions, adapters, shielding, over-braiding, and jacketing can satisfy the most complex and demanding applications - from test equipment, robotics, and missile launch systems to shipboard warning systems and naval avionics.

Glenair uniquely offers three types of conduit conforming to MIL-C-24758 (SH): For superior shielding performance and crush resistance, Glenair's standard M24758/1 conduit offers a brass inner core with a bronze overbraid, sealed from the weather by a neoprene outer jacket. The brass conduit may also be ordered with a compressed inner core for increased flexibility.

For applications where crush resistance is not required, Glenair offers a fluorocarbon (FEP) inner core with two tin over copper braids and

a neoprene outer jacket.The complete range of conduit, tubing and

fittings have been tested and approved to all applicable Mil-Spec standards and provide optimal EMI, EMP, and RFI shielding across all frequencies including H and E fields, TEMPEST and lightning strike. Glenair's MIL-C-24758 conduit systems also provide:

• Crush Resistance • Environmental/NBC Protection • Abrasion Resistance • Flexibility • Weight Reduction • Temperature Protection • Field or Factory Assembly • Factory Repairability

Glenair continues to design and manufacture many additional MIL-C-24758 style products to meet specific customer and industry needs. Glenair is also a qualified supplier of NAVSEA RP2000 and GR2000 series fitting. A list of avail-able NAVSEA designs is provided on page F-31.

Conduit

Systems




\\archer\Current Projects\Catalogs\Shipboard Interconnect and Conduit 2013\MIL-C-24758 Legacy parts\art\M24758-1.plt

1 of 1

M24758/1 EMI/EMP Shielding Conduit

NOTES:

1. The standard conduit core material is crush-resistant, high performance brass. No core designator is used when ordering the standard brass core. FEP core material can be specified by adding "F" to the end of the standard part number configuration. Compressed brass core can be specified by adding "C" to the end of he standard part number configura-tion.

2. FEP core is supplied with two tin/copper braids, and a neoprene jacket3. Metric dimensions (mm) are indicated in parentheses.4. For complete dimensions see applicable Military Specification.

NominalI.D.

.250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

ConduitSizeCode

0203040506081012162024

I.D.Min

.245 (6.2) .370 (9.4) .495 (12.6) .620 (15.7) .745 (18.9) .995 (25.3) 1.245 (31.6) 1.495 (38.0) 1.995 (50.7) 2.495 (63.4) 2.995 (76.1)

O.D.(Over Core)

±0.01 (.3) .364 (9.2) .488 (12.4) .637 (16.2) .760 (19.3) .880 (22.4) 1.192 (30.3) 1.454 (36.9) 1.704 (43.3) 2.214 (56.2) 2.714 (68.9) 3.204 (81.4)

O.D.(Over Jacket)

±.040 (1.0) .580 (14.7) .700 (17.8) .850 (21.6) .980 (24.9) 1.100 (27.9) 1.410 (35.8) 1.660 (42.2) 1.910 (48.5) 2.440 (62.0) 2.940 (74.7) 3.440 (87.4)

Min Bend Radius (Inside)

1.250 (31.8) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) 3.750 (95.3) 5.000 (127.0) 6.250 (158.8) 7.500 (190.5) 10.000 (254.0) 12.500 (317.5) 15.000 (381.0)

TABLE I

Core

Wire Overbraid

Weather Jacket

O.D. Over Jacket

O.D. Over Core I.D.

Standard Brass, Compressed Brass

and FEP

M24758/1-16-FBasic Part No.

Conduit Size Code

Core Designator: (See Note 1)Omit for uncompressed brassF = FEPC = Compressed Brass

Con

duit

Syst

ems





1 of 1

M24758/2 Straight Conduit Fitting

1. The function of the M24758/2 fitting is to terminate flexible shielding conduit and to provide a standard thread for attaching all M24758/9 through M24758/19 fittings.

2. Metric dimensions (mm) are indicated in parentheses.3. For complete dimensions see applicable Military Specification.

M24758/2-16-A

Basic Part No.

Conduit Size Code

Material Designator: A = Aluminum B = Brass C = CRES 316

ConduitSizeCode

0203040506081012162024

BTHREAD

(Class 2B) 0.438 - 28 UNEF 0.563 - 24 UNEF 0.688 - 24 UNEF 0.813 - 20 UNEF 0.938 - 20 UNEF 1.250 - 18 UNEF 1.563 - 18 UNEF 1.875 - 16 UN 2.375 - 16 UN 2.875 - 16 UN 3.375 - 16 UN

J THREAD LENGTH

+.06 (15.2) -.00 -.0 .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

L CONE

LENGTH ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

EKNURL

LENGTH ±.06 (15.2) .500 (12.7) .500 (12.7) .620 (15.7) .620 (15.7) .750 (19.1) .750 (19.1) .870 (22.1) .870 (22.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDIA

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

NDIA

(Maximum) .700 (17.8) .820 (20.8) .970 (24.6) 1.120 (28.4) 1.220 (31.0) 1.530 (38.9) 1.810 (46.0) 2.120 (53.8) 2.620 (66.5) 3.120 (79.2) 3.620 (91.9)

B Thread J L

Tapered Sleeve

Conduit

M Dia

Coupling Nut

Straight Knurl (Medium Coarse)

E E

N Dia

TABLE I

Conduit

Systems





1 of 1

M24758/3 45° Conduit Fitting



M24758/3-16-ABasic Part No.

Conduit Size Code


ConduitSizeCode

0203040506081012162024

BThread


G +.01 (.3) -.02 (.5) .140 (3.6) .170 (4.3) .170 (4.3) .230 (5.8) .230 (5.8) .290 (7.4) .290 (7.4) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9)

EKnurl

Length ± .06 (15.2) .500 (12.7) .500 (12.7) .620 (15.7) .620 (15.7) .750 (19.1) .750 (19.1) .870 (22.1) .870 (22.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

S +.06 (15.2) .370 (9.4) .370 (9.4) .370 (9.4) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9) .500 (12.7)

RBend

Radius ±.06 (15.2) .430 (10.9) .560 (14.2) .750 (19.1) .870 (22.1) 1.060 (26.9) 1.370 (34.8) 1.680 (42.7) 2.060 (52.3) 2.680 (68.1) 3.310 (84.1) 4.500 (114.3)

WWall

Thickness(Minimum)

.028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .058 (1.5) .058 (1.5) .058 (1.5) .058 (1.5)

L CONE

LENGTH ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

45°

SW

R

Safety Wire Holes (3 Places)

B Thread

G Max Dim, Captive Nut to

Elbow Measured at Assy

Captive Nut

E ECoupling Nut


(3 places)

L

Tapered Sleeve

Conduit

M Dia

TABLE I

Con

duit

Syst

ems





1 of 1

M24758/4 90° Conduit Fitting




Conduit Size Code


ConduitSizeCode

0203040506081012162024

BThread


G +.01 (.3) -.02 (.5) .140 (3.6) .170 (4.3) .170 (4.3) .230 (5.8) .230 (5.8) .290 (7.4) .290 (7.4) .350 (8.9) .350 (8.9) .350 (8.9) .350 (8.9)

** CONE LENGTH

±.06 (15.2)Sizes 02-06

.750 (19.1) Sizes 08-24

1.000 (25.4)

EKnurl

Length ± .06 (15.2) .500 (12.7) .500 (12.7) .620 (15.7) .620 (15.7) .750 (19.1) .750 (19.1) .870 (22.1) .870 (22.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

NDia

(Maximum) .700 (17.8) .820 (20.8) .970 (24.6) 1.120 (28.4) 1.220 (31.0) 1.530 (38.9) 1.810 (46.0) 2.120 (53.8) 2.620 (66.5) 3.120 (79.2) 3.620 (91.9)

Q +.06 (15.2) .810 (20.6) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.700 (43.2) 1.810 (46.0) 2.120 (53.8) 2.500 (63.5) 3.120 (79.2) 3.250 (82.6) 4.500 (114.3)

RBend

Radius ±.06 (15.2) .430 (10.9) .560 (14.2) .750 (19.1) .870 (22.1) 1.060 (26.9) 1.370 (34.8) 1.680 (42.7) 2.060 (52.3) 2.680 (68.1) 3.310 (84.1) 4.500 (114.3)

WWall

Thickness(Minimum)

.028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .028 (.7) .058 (1.5) .058 (1.5) .058 (1.5) .058 (1.5)

90° ElbowW

N Dia **

Tapered Sleeve

Conduit

M Dia

Coupling Nut

Str Knurl, Med Coarse, 3 Places

E E

Safety Wire Hole, 3 Places

Captive NutG Max. Dim.

Captive Nut to Elbow Measured

at Assy

B Thread

QR

TABLE I

Conduit

Systems


© 2002 Glenair, Inc. Printed in U.S.A.


CAGE Code 06324 Rev. 08.06.15


1 of 1

M24758/5 Conduit-to-Panel Fitting

1. The function of the M24758/5 fitting is to terminate flexible shielding conduit directly to a panel. Two jam nuts are supplied with this fitting. One nut secures the fitting to the panel, and a second nut acts as a lock nut to the first.



Conduit Size Code


ConduitSizeCode

0203040506081012162024

AThread

(Class 2A) 0.625 - 24 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.188 - 18 UNEF 1.438 - 18 UNEF 1.750 - 16 UN 2.000 - 16 UN 2.500 - 16 UN 3.000 - 16 UN 3.500 - 16 UN

D Dia

(Minimum) .250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

L Cone

Length ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

EKnurl

Length ±.06 (15.2) .500 (12.7) .500 (12.7) .560 (14.2) .560 (14.2) .620 (15.7) .620 (15.7) .680 (17.3) .680 (17.3) .750 (19.1) .750 (19.1) .750 (19.1)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

PDia

(Minimum) .870 (22.1) 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.680 (42.7) 2.000 (50.8) 2.250 (57.2) 3.000 (76.2) 3.500 (88.9) 4.000 (101.6)

L Tapered SleeveConduit

M Dia

Coupling Nut

Straight Knurl, Medium Coarse, 4 Places

P Dia D Dia

A Thread

Nuts (2) Weather Gasket

E

.1875 (4.8)

.6875 (17.5)

TABLE I

Con

duit

Syst

ems





1 of 1

M24758/6 Conduit-to-Threaded Pipe Fittings

1. The function of the M24758/6 fitting is to terminate flexible shielding conduit with a reusable fitting having an external tapered pipe thread.



Conduit Size Code


ConduitSizeCode

0203040506081012162024

AThread

(Class 2A) 0.250 - 18.00 NPT 0.375 - 18.00 NPT 0.500 - 14.00 NPT 0.750 - 14.00 NPT 0.750 - 14.00 NPT 1.000 - 11.50 NPT 1.250 - 11.50 NPT 1.500 - 11.50 NPT 2.000 - 11.50 NPT 2.500 - 8.00 NPT 3.000 - 8.00 NPT

D Dia

(Minimum) .250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

L Cone

Length ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

PDia

(Minimum) .750 (19.1) .870 (22.1) .960 (24.4) 1.180 (30.0) 1.370 (34.8) 1.500 (38.1) 1.810 (46.0) 2.120 (53.8) 2.620 (66.5) 3.250 (82.6) 3.870 (98.3)

L

Tapered Sleeve

Conduit

M Dia

Coupling Nut

Straight Knurl, Medium Coarse

D Dia

A Thread(Ext NPT)

Body

P

TABLE I

Conduit

Systems





1 of 1

M24758/7 Conduit-to-Stuffing Tube Fitting

1. The M24758/7 adapter couples MIL-S-24235/9 through MIL-S-24235/17 stuffing tubes to M24758/1 conduit.2. Any combination of conduit and stuffing tube sizes may be ordered by identifying the appropriate conduit size and

stuffing tube size in the part number configuration.3. Metric dimensions (mm) are indicated in parentheses.4. For complete dimensions see applicable Military Specification.

M24758/7-04-B-ABasic Part No.

Conduit Size Code

Stuffing Tube Size Code


H L

Tapered Sleeve

Conduit

M Dia

P

Coupling Nut

Straight Knurl(Medium Coarse)J

QA Thread

A Dia

Con

duit

Syst

ems




MIL-S-24235Stuffing Tube

Size CodeABCDEFGJKLMNPRSTVWXYZ

AABB

AThread

(Class 2A) 0.875 - 12 UN 1.000 - 12 UN 1.125 - 12 UN 1.250 - 12 UN 1.250 - 12 UN 1.313- 12 UN 1.500 - 12 UN 1.625 - 12 UN 1.750 - 12 UN 1.813 - 12 UN 2.000 - 12 UN 2.063 - 12 UN 2.188 - 12 UN 2.313 - 12 UN 2.688 - 12 UN 2.875 - 12 UN 3.000 - 12 UN 3.125 - 12 UN 3.250 - 12 UN 3.375 - 12 UN 3.563 - 12 UN 3.750 - 12 UN 4.000 - 12 UN

ADia

.406 (10.3) .515 (13.1) .640 (16.3) .750 (19.1) .812 (20.6) .843 (21.4) .935 (23.7) 1.062 (27.0) 1.171 (29.7) 1.265 (32.1) 1.406 (35.7) 1.515 (38.5) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.062 (52.4) 2.187 (55.5) 2.312 (58.7) 2.500 (63.5) 2.609 (66.3) 2.781 (70.6) 2.875 (73.0) 3.157 (80.2)

J ±.02 (.5) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .438 (11.1) .438 (11.1)

H ±.02 (.5) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.500 (38.1) 1.500 (38.1) 1.500 (38.1) 1.563 (39.7) 1.563 (39.7) 1.563 (39.7) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 3.125 (79.4) 3.125 (79.4)

PDim

(Minimum) 1.031 (26.2) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.438 (36.5) 1.656 (42.1) 1.781 (45.2) 1.875 (47.6) 1.938 (49.2) 2.188 (55.6) 2.250 (57.2) 2.344 (59.5) 2.469 (62.7) 2.813 (71.5) 2.969 (75.4) 3.094 (78.6) 3.281 (83.3) 3.438 (87.3) 3.563 (90.5) 3.750 (95.3) 3.875 (98.4) 4.125 (104.8)

Q ±.02 (.5) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4)

ConduitSizeCode

0203040506081012162024

L Cone

Length ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

TABLE I

M24758/7 Conduit-to-Stuffing Tube Fitting

TABLE II

Every Picture Tells a Story

This One Speaks Volumes

1211 Air WayGlendale, California 91201-2497

Telephone: 818-247-6000 · Facsimilie: 818-500-9912 · EMail: [email protected]

U n i t e d S t a t e s · United Kingdom · Germany · N o r d i c · France · Italy

www.glenair.com

with wire protection solutions that in-clude plastic convoluted tubing, metal-core conduit, jacketing and metal or fabric overbraiding. We also produce a line of robust composite junction boxes, which add new design options to traditional conduit wire protection assemblies.

At Glenair, we're ready to go with both the individual technologies, as well as the most innovative and ef-fective packaging solutions available today. Now that's a story worth telling.

G lenair is in the business of solv-ing even the most complex intercon-

nect design problems. That's why we've built our conduit product line to take advantage of our forty years of experience in harness assembly and interconnect packaging.

We know that your problem isn't solved when the connector and wire are selected. The real work starts with the packaging of the key compo-nents for actual use. Glenair is ready

Con

duit

Syst

ems




M24758/8 Conduit-to-Conduit Fitting

1. The function of the M24758/8 conduit-to-conduit fitting is to connect two sections of flexible shielding conduit. Consult factory to mate two different sizes of conduit.



Conduit Size Code


ConduitSizeCode

0203040506081012162024

L Cone

Length ±.06 (15.2) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4)

MDia

(Maximum) .930 (23.6) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.620 (41.1) 1.810 (46.0) 2.180 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (111.3)

EKnurl

Length ±.06 (15.2) .500 (12.7) .500 (12.7) .560 (14.2) .560 (14.2) .620 (15.7) .620 (15.7) .680 (17.3) .680 (17.3) .750 (19.1) .750 (19.1) .750 (19.1)


1 of 1

Tapered Sleeve

Conduit

Coupling NutStr. Knurl

(Medium Coarse)E

Str. Knurl (Medium Coarse)

Coupling Nut

M Dia

Conduit

Tapered Sleeve

L

.125 (3.2) Min..125 (3.2)L

TABLE I

Conduit

Systems




M24758/9-16-06-01-AMaterial Designator: A = Aluminum B = Brass C = CRES 316

Style Designator

Basic Part No.

Conduit Size Code (See Table I)

A-Thread Code (See Table II)

M24758/9 Adapter for MIL-C-5015 Series 3100 Connectors

1. The M24758/9 adapter couples MIL-C-5015 connectors (MS3100, MS3101, MS3106, and MS-series backshells) to M24758/2, M24758/3 or M24758/4 fittings.

2. For MIL-C-5015, MS3400 Series, the M24758/13 adapter may be used.2. Metric dimensions (mm) are indicated in parentheses.3. For complete dimensions see applicable Military Specification.

STYLE 02SAME AS STYLE 01 EXCEPT

J DIMENSION IS ZERO

STYLE 03FOR USE WHEN E DIAMETER IS

EQUAL TO OR LESS THAN K DIAMETER


GREATER THAN K DIAMETER

C Thread

(Class 2A)0.438 - 28 UNEF0.563 - 24 UNEF0.688 - 24 UNEF0.813 - 20 UNEF0.938 - 20 UNEF1.250 - 18 UNEF1.563 - 18 UNEF1.875 - 16 UN2.375 - 16 UN2.875 - 16 UN3.375 - 16 UN

ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

TABLE I

\\archer\Current Projects\Catalogs\Shipboard Interconnect and Conduit 2013\MIL-C-24758 Legacy parts\art\M24758-9-01.plt

1 of 1


1 of 1

D Dia

E Dia

A Thread

.50 (12.7)

.188 (4.8)H J

.063 (1.6) Min


C Thread

K Dia

L


C Thread

K Dia

L

.25 (6.4)

E DiaD Dia

A ThreadH

.125 (3.2).219 (5.6)

NDia

Con

duit

Syst

ems




ConnectorCode

ABCDEF

Class

AE & R

A, E & RA

E & R

ManufacturerAll Manufacturers

AmphenolAmphenol

BendixCannonCannon

SeriesMS-Series BackshellMS3100, MS3101, MS3106, 97-3100, 97-3101, 97-3106MS3100, MS3101, MS3106, 69-3100, 69-3101, 69-3106MS3100, MS3101, MS3106, 10-214, 10-720, 10-721, 10-726MS3100, MS3101, MS3106, CA-3101, CA-3106MS3100, MS3101, MS3106,

M24758/9 Adapter for MIL-C-5015 Series 3100 Connectors

AThread Code

0102030404050506060708080910111213141516171819202122232425262728293031

AThread

(Class 2B) 0.375 - 32 UNEF 0.438 - 27 UNS 0.438 - 28 UNEF 0.500 - 28 UNEF 0.500 - 28 UNEF 0.563 - 24 UNEF 0.563 - 24 UNEF 0.625 - 24 UNEF 0.625 - 24 UNEF 0.688 - 24 UNEF 0.750 - 20 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.125 - 24 UNS 1.188 - 18 UNEF 1.250 - 18 UNEF 1.375 - 18 UNEF 1.438 - 18 UNEF 1.625 - 18 UNEF 1.750 - 18 UNS 1.875 - 16 UN 1.906 - 18 2.000 - 18 UNS 2.063 - 16 UNS 2.063 - 20 2.125 - 16 UN 2.125 - 18 UN 2.250 - 16 UN 2.313 - 16 UNS 2.375 - 16 UN 2.625 - 16 UN 2.813 - 18 2.875 - 16 UN

Conn.Shell Size8S8S8

8S10S10S10SL10SL

12, 12S12,12S12SL

14, 14S16, 16S

182020

20, 222224

24, 28283232323636363636404040444848

DDia

±.02 (.5) .500 (12.7) .560 (14.2) .560 (14.2) .620 (15.7) .620 (15.7) .680 (17.3) .680 (17.3) .750 (19.1) .750 (19.1) .810 (20.6) .870 (22.1) .870 (22.1) 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.250 (31.8) 1.310 (33.3) 1.370 (34.8) 1.500 (38.1) 1.560 (39.6) 1.750 (44.5) 1.870 (47.5) 2.000 (50.8) 2.030 (51.6) 2.120 (53.8) 2.180 (55.4) 2.180 (55.4) 2.250 (57.2) 2.250 (57.2) 2.370 (60.2) 2.430 (61.7) 2.500 (63.5) 2.750 (69.9) 2.930 (74.4) 3.000 (76.2)

H ±.02 (.5) .180 (4.6) .210 (5.3) .210 (5.3) .210 (5.3) .210 (5.3) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .280 (7.1) .310 (7.9) .280 (7.1) .310 (7.9) .280 (7.1) .310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9) .280 (7.1) .310 (7.9)

EDia

±.02 (.5) .280 (7.1) .340 (8.6) .340 (8.6) .370 (9.4) .370 (9.4) .450 (11.4) .450 (11.4) .500 (12.7) .500 (12.7) .570 (14.5) .620 (15.7) .620 (15.7) .750 (19.1) .870 (22.1) 1.000 (25.4) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.250 (31.8) 1.310 (33.3) 1.500 (38.1) 1.620 (41.1) 1.750 (44.5) 1.780 (45.2) 1.870 (47.5) 1.930 (49.0) 1.930 (49.0) 2.000 (50.8) 2.000 (50.8) 2.120 (53.8) 2.180 (55.4) 2.250 (57.2) 2.500 (63.5) 2.680 (68.1) 2.750 (69.9)

JStyle 01*

±.03 (.8) .500 (12.7) .530 (13.5) .530 (13.5) .560 (14.2) .560 (14.2) .590 (15.0) .590 (15.0) .620 (15.7) .620 (15.7) .650 (16.5) .680 (17.3) .680 (17.3) .710 (18.0) .750 (19.1) .780 (19.8) .780 (19.8) .810 (20.6) .870 (22.1) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) 1.250 (31.8) 1.280 (32.5) 1.340 (34.0) 1.370 (34.8) 1.370 (34.8) 1.400 (35.6) 1.400 (35.6) 1.500 (38.1) 1.560 (39.6) 1.620 (41.1) 1.870 (47.5) 2.060 (52.3) 2.120 (53.8)

Conn.Code

(Table II)DB

C, E, FA

A, B, C, D, EE

E, FA, B, C, D

A, D, FB, C, E

AA, B, C, D, E, FA, B, C, D, E, FA, B, C, D, E, F

B, D, E, FCA

B, C, D, E, FB, C, D, E, F

AB, C, D, E, F

AD, E, F

B, CADC

E, FBAD

B, E, FB, F

FB

* For Style 02, J Dimension is zero.

TABLE III (A Thread Code and Adapter Dimensions)

TABLE II (MIL-C-5015 Connector Codes)

Conduit

Systems




1. The M24758/10 adapter couples triaxial connectors to M24758/2, M24758/3 or M24758/4 fittings.2. Metric dimensions (mm) are indicated in parentheses.3. For complete dimensions see applicable Military Specification.

M24758/10 Adapter for Triaxial Connectors


Style Designator

Basic Part No.




1 of 1

STYLE 02ADAPTER WITH

EXTERNAL "A" THREAD

STYLE 01ADAPTER WITH

INTERNAL "A" THREAD


1 of 1

E

H L

F K N

C Thread

Str. Knurl (Medium Coarse).25

(6.4)

A Thread(Code 03, 04)

D Dia

A Thread(Code 01, 02)

D DiaF

Dia

Straight Knurl, Medium Coarse

C Thread

K Dia

L

H

Con

duit

Syst

ems




C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

TABLE I

M24758/10 Adapter for Triaxial Connectors

A Thread

0.750 - 16 UNFClass 2B0.875 - 20 UNEFClass 2B1.063 - 18 UNEFClass 2A

1.063 - 18 UNEFClass 2A

AThreadCode

01

02

03

04

DDiaMin.

.875 (22.2)

1.000 (25.4)

.922 (23.4)

.922 (23.4)

EMin.

--

--

.187 (4.7)

.227 (5.8)

HDia

±.02 (.5) .562 (14.3)

.500 (12.7)

.312 (7.9)

.335 (8.5)

Connector Part Number FormerlyITT/Cannon Gremar152105-2380 5633

152100-2390 7991

152190-0000 16312

11865

FDiaMin.

.297 (7.5)

.515 (13.1)

.564 (14.3)

.564 (14.3)

TypeRG-233/URG-58C/URG-214/URG-98/URG-14A/URE-293A/U*TRF-8RG-14A/URE-293A/U*TRF-8

OD ±.02 (.5) .216 (5.5) .195 (5.0) .425 (10.8) .420 (10.7) .545 (13.8) .545 (13.8) .500 (12.7) .545 (13.8) .545 (13.8) .500 (12.7)

Cable Reference

* Times Wire and Cable Co.

TABLE II (MIL-C-5015 Connector Code)

Conduit

Systems




Rev. 01.07.16

M24758/11 Adapter for Coaxial Connectors

1. The M24758/11 adapter couples coaxial connectors to M24758/2, M24758/3 or M24758/4 fittings. 2. Select an A-thread from Table II which matches that of the back of the nut on the connector being used. If

none of the A-threads match, substitute the desired A-thread information in lieu of the A-thread code in the part number. For example, a fitting for a 0.375" conduit with a 0.5-28 A-thread of 0.313" H-length would have the part number: M24758/11-03-0.5-28-0.313-A.


M24758/11-16-01-AMaterial Designator: A = Aluminum B = Brass C = CRES 316

Basic Part No.


A-Thread Code (See Table II and Note 2)


1 of 1

H L

K Dia N DiaD Dia

A Thread

Straight Knurl(Medium Coarse)

C Thread

.25(6.4)

Con

duit

Syst

ems




Rev. 01.07.16

C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

TABLE I

Ø A Thread

(Class 2A)0.375 - 32 UNEF

0.438 - 28 UNEF

0.625 - 24 UNEF

0.688 - 24 UNEF

0.938 - 20 UNEF

0.813 - 20 UNEF

AThreadCode

02

04

06

08

10

12

H ±.03 (.8) .210 (5.3) .250 (6.4)

.310 (7.9) .310 (7.9) .310 (7.9) .310 (7.9)

DDia

±.02 (.5) .226 (5.7) .345 (8.8)

.433 (11.0)

.568 (14.4) .650 (16.5) .895 (22.7)

OD .195 (5.0) .216 (5.5) .332 (8.4) .332 (8.4) .332 (8.4) .420 (10.7) .425 (10.8) .545 (13.8) .545 (13.8) .625 (15.9) .630 (16.0) .870 (22.1)

TypeRG-58RG-223RG-5RG-6RG-21RG-9RG-214RG-14RG-293RG-57RG-294RG-17

Coaxial Cable

M24758/11 Adapter for Coaxial Connectors

TABLE II (A Thread and Fitting Dimensions)

Conduit

Systems





1 of 1


1 of 1

M24758/12 Adapter for MIL-C-26482 Series I Connectors

1. The M24758/12 adapter couples MIL-C-26482 Series I connectors (MS3110, MS3111, or MS3116 series) to M24758/2, M24758/3 or M24758/4 fittings.

2. For MIL-C-26482 series 2, the M24758/13 adapter may be used.3. Metric dimensions (mm) are indicated in parentheses.4. For complete dimensions see applicable Military Specification.

STYLE 02SAME AS STYLE 01 EXCEPT

J DIMENSION IS ZERO






Style Designator

Basic Part No.



D Dia

E Dia

A Thread

.50 (12.7)

.188 (4.8)J

.063 (1.6) Min


C Thread

K Dia

L

D Dia

E Dia

A Thread

.25 (6.4)

.188 (4.8)

N Dia


C Thread

K Dia

L.125 (3.2)

Con

duit

Syst

ems




A Thread

(Class 2B)0.438 - 28 UNEF0.563 - 24 UNEF0.688 - 24 UNEF0.813 - 20 UNEF0.938 - 20 UNEF1.063 - 18 UNEF1.188 - 18 UNEF1.313 - 18 UNEF1.438 - 18 UNEF

ConnectorShellSize081012141618202224

EDia

±.02 (.5) .340 (8.6) .450 (11.4) .570 (14.5) .680 (17.3) .810 (20.6) .930 (23.6) 1.060 (26.9) 1.180 (30.0) 1.310 (33.3)

AThreadCode

070911131517192123

DDia

±.02 (.5) .590 (15.0) .710 (18.0) .840 (21.3) .960 (24.4) 1.090 (27.7) 1.210 (30.7) 1.340 (34.0) 1.460 (37.1) 1.590 (40.4)

JStyle 01

±.02 (.5) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) 1.060 (26.9) 1.180 (30.0) 1.620 (41.1) 1.680 (42.7)

M24758/12 Adapter for MIL-C-26482 Series I Connectors

C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

TABLE I

TABLE II (A Thread Code and Adapter Dimensions)

Conduit

Systems





1 of 1


1 of 1


1 of 1

M24758/13 Adapter for Connectors withMS3155 Accessory Interface

STYLE 02SAME AS STYLE 01 EXCEPT Y

DIMENSION IS LESS THAN J. STYLE 02 IS USED WHEN THE EXTRA

WORKING ROOM PROVIDED BY DIMENSION J OF STYLE 01 IS NOT A

REQUIREMENT.






Style Designator

Basic Part No.


Connector Dash Number (See Table II)

MS3155 Design Standard Applies

M Thread (Ref)

A Dia

E Dia(Ref)

Nut Coupling

Holes for .032 DiaSafety Wire (3 Req'd)

BodyStraight Knurl

(Medium Coarse) (3 Places)

C Thread

K Dia

J L

.12 (3.0) Min

.06 (1.5) Min


Y

MS3155 Design Standard Applies

M Thread (Ref)

A Dia

E Dia(Ref)

Nut Coupling

Holes for .032 DiaSafety Wire (3 Req'd)


(2 Places)

C Thread

K Dia

.38 (9.7)±.03 (.8)

.25 (6.4)

N Dia

.25 (6.4)

Con

duit

Syst

ems




1. The M24758/13 adapter couples connectors listed in Table I to M24758/2, M24758/3 or M24758/4 conduit fit-tings.

2. The coupling nut end of this adapter shall conform to Military Standard MS3155 (Navy), "Connector, electric, rear accessory design standard". MS3155 takes precedence over this specification.

3. The E diameter and M-thread of this drawing are the same as the E diameter and M-thread of MS3155, and are included for reference purposes.


Conn.DashNo.0308101214161820222428323640444861

M Thread(Class 2B)

(Ref.) (Note 3) 0.563 - 24 UNEF 0.500 - 20 UNF 0.625 - 24 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.312 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNEF 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF

EDia. (Ref)

Note 3 .270 (6.9) .270 (6.9) .375 (9.5) .511 (13.0) .585 (14.9) .710 (18.0) .789 (20.0) .914 (23.2) 1.039 (26.4) 1.154 (29.3) 1.389 (35.3) 1.635 (41.5) 1.850 (47.0) 2.065 (52.5) 2.320 (58.9) 2.570 (65.3) 1.194 (30.3)

J(Style 01)

±.03 (.8) 1.060 (26.9) 1.060 (26.9) 1.060 (26.9) 1.060 (26.9) 1.060 (26.9) 1.060 (26.9) 1.120 (28.4) 1.380 (35.1) 1.830 (46.5) 1.830 (46.5) 2.300 (58.4) 2.550 (64.8) 2.800 (71.1) 3.050 (77.5) 3.550 (90.2) 3.620 (91.9) 1.880 (47.8)

Y(Style 02)

±.03 (.8) .620 (15.7) .620 (15.7) .690 (17.5) .690 (17.5) .750 (19.1) .750 (19.1) .750 (19.1) .810 (20.6) .810 (20.6) .810 (20.6) .880 (22.4) .880 (22.4) .880 (22.4) .940 (23.9) .940 (23.9) .940 (23.9) .810 (20.6)

ADia.Max.

.669 (17.0) .617 (15.7) .734 (18.6) .858 (21.8) .984 (25.0) 1.112 (28.2) 1.218 (30.9) 1.345 (34.2) 1.468 (37.3) 1.593 (40.5) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.219 (81.8) 1.653 (42.0)

MIL-C-26482

(Series 2)

081012131618202224

MIL-C-81703 (Navy)

(Series 3)03

0712192737

61

MIL-C-5015 (MS3400 Series)

8SL10S, 10SL

12, 12S14, 14S16, 16S

18202224283236404448

NAS 1599 & MIL-C-83723

(Series 1 & 3)

081012141618202224

TABLE II (Connector Dash Numbers & Fitting Dimensions)

C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

TABLE I

M24758/13 Adapter for Connectors withMS3155 Accessory Interface

Conduit

Systems





1 of 1

M24758/14 Adapter for

MIL-C-28840 (EC) Backshells

1. The M24758/14 adapter provides a non-environmental coupling between certain MIL-C-28840 (EC) backshells and the M24758/2, M24758/3 or M24758/4 fittings, specifically, the A-thread of this adapter mates with the V-thread of the M28840/6 backshell (straight), the M28840/8 backshell (90o), or the M28840/9 backshell (45o).


STYLE 01FOR USE WHEN K DIAMETER IS

SMALLER THAN E DIAMETER

STYLE 02FOR USE WHEN K DIAMETER

IS EQUAL TO OR LARGER THAN E DIAMETER


Style Designator

Basic Part No.


A Thread Code (See Table II)


1 of 1

D Dia

A Thread

.531 (13.5)± .010 (.3)

.125 (3.2) Ref.L

K Dia

C Thread


D Dia

A Thread

.531 (13.5)± .010 (.3)

.125 (3.2) Ref. L

K Dia

C Thread


E Dia

N Dia

.250 (6.4) Ref.

Con

duit

Syst

ems




C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

NDia

±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1)

A Thread

(Class 2B)0.625 - 24 UNEF0.750 - 20 UNEF0.875 - 20 UNEF1.000 - 20 UNEF1.188 - 18 UNEF1.438 - 18 UNEF1.750 - 18 UNS2.000 - 18 UNS2.250 - 16 UN1.125 - 18 UNEF1.250 - 18 UNEF1.626 - 18 UNEF1.875 - 18 UNS2.125 - 16 UN2.750 - 16 UN

AThreadCode

010203040506070809101112131415

EDia

±.015 (.4) .435 (11.0) .578 (14.7) .703 (17.9) .828 (21.0) 1.000 (25.4) 1.250 (31.8) 1.562 (39.7) 1.813 (46.1) 2.062 (52.4) .938 (23.8) 1.078 (27.4) 1.438 (36.5) 1.688 (42.9) 1.938 (49.2) 2.563 (65.1)

DDia

±.015 (.4) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.438 (36.5) 1.688 (42.9) 2.000 (50.8) 2.250 (57.2) 2.250 (57.2) 1.375 (34.9) 1.500 (38.1) 1.875 (47.6) 2.125 (54.0) 2.375 (60.3) 3.000 (76.2)

ShellSize(Ref.)B, CB, C

CD, E

C, D, FD, E, F, G

F, G, HG, H, J

JC, D, E

C, D, E, F, GD, E, F, G

F, G, HG, H, J

J


M24758/14 Adapter for

MIL-C-28840 (EC) Backshells

TABLE I

Conduit

Systems





1 of 1

1. The M24758/15 adapter couples MIL-S-24235/9 through MIL-S-24235/17 stuffing tubes to M24758/2, M24758/3, or M24758/4 fittings.

2. Any combination of conduit and stuffing tube sizes may be used by identifying the appropriate conduit size and stuffing tube size in the part number configuration.


M24758/15 Adapter for MIL-C-24235 Stuffing Tubes

M24758/15-B-04-ABasic Part No.

Stuffing Tube Size Code

Conduit Size Code


HL

K Dia

C Thread

J

QA Thread

A Dia

P

Con

duit

Syst

ems




MIL-S-24235Stuffing

Tube SizeABCDEFGJKLMNPRSTVWXYZ

AABB

AThread

(Class 2A) 0.875 - 12 UN 1.000 - 12 UN 1.125 - 12 UN 1.250 - 12 UN 1.250 - 12 UN 1.313 - 12 UN 1.500 - 12 UN 1.625 - 12 UN 1.750 - 12 UN 1.813 - 12 UN 2.000 - 12 UN 2.063 - 12 UN 2.188 - 12 UN 2.313 - 12 UN 2.688 - 12 UN 2.875 - 12 UN 3.000 - 12 UN 3.125 - 12 UN 3.250 - 12 UN 3.375 - 12 UN 3.563 - 12 UN 3.750 - 12 UN 4.000 - 12 UN

ADia

.406 (10.3) .515 (13.1) .640 (16.3) .750 (19.1) .812 (20.6) .843 (21.4) .935 (23.7) 1.062 (27.0) 1.171 (29.7) 1.265 (32.1) 1.406 (35.7) 1.515 (38.5) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.062 (52.4) 2.187 (55.5) 2.312 (58.7) 2.500 (63.5) 2.609 (66.3) 2.781 (70.6) 2.875 (73.0) 3.157 (80.2)

J ±.02 (.5) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .313 (8.0) .438 (11.1) .438 (11.1)

H ±.02 (.5) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.063 (27.0) 1.188 (30.2) 1.188 (30.2) 1.188 (30.2) 1.500 (38.1) 1.500 (38.1) 1.500 (38.1) 1.563 (39.7) 1.563 (39.7) 1.563 (39.7) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 2.188 (55.6) 3.125 (79.4) 3.125 (79.4)

PDim

(Minimum) 1.031 (26.2) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.438 (36.5) 1.656 (42.1) 1.781 (45.2) 1.875 (47.6) 1.938 (49.2) 2.188 (55.6) 2.250 (57.2) 2.344 (59.5) 2.469 (62.7) 2.813 (71.5) 2.969 (75.4) 3.094 (78.6) 3.281 (83.3) 3.438 (87.3) 3.563 (90.5) 3.750 (95.3) 3.875 (98.4) 4.125 (104.8)

Q ±.02 (.5) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .188 (4.8) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4) .250 (6.4)

ConduitSizeCode

0304

04,05,0606060808101010

10,12121616161616

16,20202020

20,2424

C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

TABLE I

M24758/15 Adapter for MIL-C-24235 Stuffing Tubes

TABLE II

Conduit

Systems





1 of 1

M24758/16 Adapter for Miscellaneous Fittings

1. The M24758/16 adapter couples miscellaneous fittings to M24758/2, M24758/3, or M24758/4 fittings.2. The American National Thread Series (N) has been superseded by the Unified Thread Series (UN). The series

N-thread sizes listed in table II are retained for use with those items which have series N-threads. 3. Metric dimensions (mm) are indicated in parentheses.4. For complete dimensions see applicable Military Specification.

M24758/16-16-04-AMaterial Designator: A = Aluminum B = Brass C = CRES 316

Basic Part No.



HL

K Dia

C Thread

.438 (11.1)

.125 (3.2)A Thread

D Dia

P

Con

duit

Syst

ems




A Thread

(Class 2A)1.125 - 14 N1.288 - 14N0.750 - 14 NPSM1.000 - 11 1/2 NPSM1.250 - 11 1/2 NPSM1.250 - 11 1/2 NPSM2.025 - 11 1/2 N2.250 - 11 1/2 N2.500 - 8 NPSM3.000 - 8 NPSM1.500 - 11 1/2 NPSM2.000 - 11 1/2 NPSM

AThreadCode

010304060709101316192021

HDim.

±.02 (.5) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.560 (39.6) 1.690 (42.9) 2.000 (50.8) 2.060 (52.3) 1.250 (31.8) 1.250 (31.8)

DDia

±.005 (.4) .500 (12.7) .750 (19.1) .750 (19.1) 1.000 (25.4) 1.000 (25.4) 1.180 (30.0) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 1.500 (38.1) 2.000 (50.8)

pDim.Min.

1.250 (31.8) 1.430 (36.3) 1.370 (34.8) 1.680 (42.7) 1.810 (46.0) 1.810 (46.0) 2.180 (55.4) 2.500 (63.5) 3.000 (76.2) 3.620 (91.9) 2.500 (63.5) 3.000 (76.2)

C Thread


ConduitSizeCode

0203040506081012162024

L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

TABLE I

M24758/16 Adapter for Miscellaneous Fittings


Conduit

Systems





1 of 1

1. The M24758/17 adapter couples any fittings having a female tapered pipe thread to M24758/2, M24758/3, or M24758/4 fittings.


M24758/17 Adapter for Tapered Pipe Thread




ConduitSizeCode

0203040506081012162024

AThread

0.250 - 18.00 NPT 0.375 - 18.00 NPT 0.500 - 14.00 NPT 0.750 - 14.00 NPT 0.750 - 14.00 NPT 1.000 - 11.50 NPT 1.250 - 11.50 NPT 1.500 - 11.50 NPT 2.000 - 11.50 NPT 2.500 - 8.00 NPT 3.000 - 8.00 NPT

PDia

(Minimum) .690 (17.5) .810 (20.6) 1.000 (25.4) 1.180 (30.0) 1.180 (30.0) 1.500 (38.1) 1.810 (46.0) 2.120 (53.8) 2.620 (66.5) 3.000 (76.2) 3.620 (91.9)

C Thread


L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

L

K Dia

C Thread

.312 (7.9)

A Thread, Ext NPT

P

TABLE I

Con

duit

Syst

ems





1 of 1

M24758/18 Adapter for Straight Pipe Thread

ConduitSizeCode

0203040506081012162024

APipe

Thread 0.250 - 18.00 NPSM 0.375 - 18.00 NPSM 0.500 - 14.00 NPSM 0.750 - 14.00 NPSM 0.750 - 14.00 NPSM 1.000 - 11.50 NPSM 1.250 - 11.50 NPSM 1.500 - 11.50 NPSM 2.000 - 11.50 NPSM 2.500 - 8.00 NPSM 3.000 - 8.00 NPSM

PDia

(Minimum) .690 (17.5) .810 (20.6) 1.000 (25.4) 1.180 (30.0) 1.180 (30.0) 1.500 (38.1) 1.810 (46.0) 2.120 (53.8) 2.620 (66.5) 3.000 (76.2) 3.620 (91.9)

C Thread


L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

1. The M24758/18 adapter couples any fittings having a female straight pipe thread to M24758/2, M24758/3, or M24758/4 fittings.


BDim.

±.02 (.5) .750 (19.1) .750 (19.1) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) .870 (22.1) 1.000 (25.4) 1.190 (30.2) 1.620 (41.1) 1.690 (42.9)




L

K Dia

C Thread

.312 (7.9)

A Thread, NPSM

P

.12 (3.0)

B

TABLE I

Conduit

Systems





1 of 1

M24758/19 Adapter for Panel Termination

P Dia K Dia

L

.6875 (17.5)

.1875 (4.8)

A Thread

Nuts (2)

.25 (6.4) Ref.

Straight Knurl, Medium Coarse,

3 Places

C Thread




PDiaMin.

.870 (22.1) 1.000 (25.4) 1.120 (28.4) 1.250 (31.8) 1.430 (36.3) 1.680 (42.7) 2.000 (50.8) 2.250 (57.2) 3.000 (76.2) 3.500 (88.9) 4.000 (101.6)

1. The M24758/19 adapter provides the capability of terminating a M24758/2, M24758/3, or M24758/4 fitting to a panel.


ConduitSizeCode

0203040506081012162024

C Thread


L ±.02 (.5) .210 (5.3) .250 (6.4) .250 (6.4) .310 (7.9) .310 (7.9) .370 (9.4) .370 (9.4) .430 (10.9) .430 (10.9) .430 (10.9) .430 (10.9)

KDiaMin.

.250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2)

AThread

(Class 2A) 0.625 - 24 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.188 - 18 UNEF 1.438 - 18 UNEF 1.750 - 16 UN 2.000 - 16 UN 2.500 - 16 UN 3.000 - 16 UN 3.500 - 16 UN

TABLE I

Con

duit

Syst

ems




GR2000 AND RP2000 Series Fittings

Glenair is also qualified for the following GR2000 and RP2000 series fittings. Consult

factory for drawings and specifications.

NAVSEA HANDBOOKS9407-AB-HBK-010GR2120-X-XX-EMXX-XXGR2121-XXSMGR2122-XXXSM (Style A)GR2122-XXXESM (Style B)GR2123-X-XX-EMXXGR2124-X-EMXX-XXGR2125-X-EMXX-XXGR2126-EMXXGR2127-EMXXGR2128-EMXXGR2129-EMXXRP2100-EMXX-T(S) Telescoping/ShortRP2110-EMXX-T(S) Telescoping/ShortRP2120-EMXX-T(S) Telescoping/ShortRP2130-EMXXRP2140-EMXXRP2141-EMXXRP2200-EMXXRP2210-EMXXRP2311-XX-XX-XXSMRP2321-XX-XXSMRP2330-XX-XX-N (No Letter Steel) SMRP2340-XX-XX-XXSMRP2350-XX-XX-XX-XSMRP2360-XX-XX-XXSMRP2400-XX-XXSMRP2411-XX-XXSMRP2420-XX-XXSMRP2430-XXSMRP2431-XXSMRP2440-XXSMRP2500-XXSMRP2610-XXSMRP2620-XXSM

SM = Electroless Nickel Plating/Mild Steel

NAVSEA HANDBOOK0967-LP-283-5010GR2120-X-X-X-XXSNGR2121-XXSNGR2122-XXXSN (Style A)GR2122-XXXESN (Style B)GR2123-X-X-XXSNGR2124-X-X-XXSNGR2125-X-X-XXSNGR2126-XXGR2127-XXGR2128-XXSMGR2129-XXRP2100-GXX-T(S)RP2110-GXX-T(S)RP2120-GXX-T(S)RP2130-GXXRP2140-GXXRP2141-GXXRP2200-GXXRP2210-GXXRP2311-XX-XX-XXSNRP2321-XX-XXSNRP2330-XX-XX-N (No Letter Steel) SNRP2340-XX-XX-XXSNRP2350-XX-XX-XX-XSNRP2360-XX-XX-XXSNRP2400-XX-XXSNRP2411-XX-XXSNRP2420-XX-XXSNRP2430-XXSNRP2431-XXSNRP2440-XXSNRP2500-XXSNRP2610-XXSNRP2620-XXSN

SN = Cadmium over Electroless Nickel/Mild Steel

Conduit

Systems




\\glenair.com\DFS\Catalogs\Shipboard Interconnect\Box Module Drawings\712-229.plt

1 of 1

K/K1

F Typ

Length

C Typ

Length (See Note 1)

J/J1

H/H1

EI.D.

Knurl Style, Mfr. Option

A Thread O-Ring (See Note 4)

.880 (22.4)Max

G/G1

STYLE IISTRAIGHT

(See Note 1)

SYMBOL SSTRAIGHT

STYLE II45° & 90°

(See Note 1)SYMBOL H

45°SYMBOL J

90°

712-229 Conduit Fitting for MIL-C-24758 Series Conduit

NOTES:

1. Conduit-to-Connector Fittings are available for allconnectors listed in the Connector Designator Refer-ence Table (Table II). Please consult factory for draw-ings of connectors not covered by connector designa-tors A, F, L and H.

2. Conduit-to-Connector Ffittings are also available withsplit backshells. Split backshell designs enable the user to ground both the cable shields and the conduit. Please consult factory for drawings.

3. When conduit diameter exceeds maximum dashnumber (Table I), Style II will be supplied. Standard length: Style I = 2.000 (50.8), Style II = 2.500 (63.5).

4. O-Ring not supplied with Connector Designator A.

5. Metric dimensions (mm) are indicated in parentheses.

712 A S 229 M 16 12 - 6Basic Part No.

Connector Designator A, F, H or L (See Table I)

Angular Function H, J, or S

Basic Number

Length in 1/2 inch increments (eg. 6 = 3.000 inches)

Dash Number (Table III)

Shell Size (Table I)

Material/Finish (Table IV)

TABLE IV: MATERIAL AND FINISHMaterial

Aluminum AlloyBrass

300 SeriesStainless SteelAluminum AlloyB1113Mild SteelBrass

Finish

Cadmium Olive Drab over ElectrolessNickel (500-Hour Salt Spray)

Passivate

Electroless NickelCadmium Olive Drab over ElectrolessNickel (500-Hour salt Spray)Unplated

Symbol

NFBN

Z1

MSN

BO

Con

duit

Syst

ems




712-229 Conduit Fitting for MIL-C-24758 Series Conduit

MaxDash No.(Table II)

02030405060608081010121220202008

ShellSize

A, F, L HG

Max.639 (16.2).654 (16.6).688 (17.5).705 (17.9).732 (18.6).748 (19.0).773 (19.6).800 (20.3).823 (20.9)

1.041 (26.4)1.092 (27.7)1.138 (28.9)1.184 (30.1)1.235 (31.4)1.287 (32.7)1.003 (25.5)

0810/1112/1314/1516/17

1820222428 323640444861

091113151719212325

HMax

1.700 (43.2)1.730 (43.9)1.750 (44.5)1.780 (45.2)1.800 (45.7)1.810 (46.0)2.020 (51.3)2.060 (52.3)2.090 (53.1)2.320 (58.9)2.360 (59.9)2.410 (61.2)2.450 (62.2)2.500 (63.5)2.550 (64.8)2.270 (57.7)

JMax

.750 (19.1)

.810 (20.6)

.870 (22.1)

.920 (23.4)

.980 (24.9)1.020 (25.9)1.080 (27.4)1.140 (29.0)1.200 (30.5)1.480 (37.6)1.610 (40.9)1.720 (43.7)1.830 (46.5)1.950 (49.5)2.080 (52.8)1.390 (35.3)

KMax

1.810 (46.0)1.870 (47.5)1.930 (49.0)2.000 (50.8)2.060 (52.3)2.080 (52.8)2.390 (60.7)2.470 (62.7)2.540 (64.5)2.780 (70.6)2.870 (72.9)2.960 (68.3)3.070 (78.0)3.200 (81.3)3.320 (84.3)2.380 (60.5)

TABLE I

DashNumber

0203040506081012162024

EI. D.

.250 (6.4)

.375 (9.5).500 (12.7).625 (15.9).750 (19.1)

1.000 (25.4)1.250 (19.6)1.500 (31.8)2.000 (50.8)2.500 (63.5)3.000 (76.2)

FMax

1.160 (29.5)1.280 (32.5)1.400 (35.6)1.590 (40.4)1.780 (45.2)1.960 (49.8)2.280 (57.9)2.660 (67.6)3.160 (80.3)3.860 (98.0)4.380 (111.3)

G1MaxN/A

.654 (16.6)

.688 (17.5)

.705 (17.9)

.732 (18.6)

.773 (19.6)

.823 (20.9)1.041 (26.4)1.092 (27.7)1.190 (30.2)1.250 (31.8)

H1MaxN/A

1.730 (43.9)1.750 (44.5)1.780 (45.2)2.800 (71.1)2.020 (51.3)2.090 (53.1)2.360 (59.9)2.450 (62.2)2.550 (64.8)2.610 (66.3)

J1MaxN/A

.810 (20.6)

.870 (22.1)

.920 (23.4)

.980 (24.9)1.080 (27.4)1.200 (30.5)1.480 (37.6)1.610 (40.9)1.860 (47.2)1.990 (50.4)

K1MaxN/A

1.870 (47.5)1.930 (49.0)2.000 (50.8)2.060 (52.3)2.390 (60.7)2.540 (64.5)2.870 (72.9)3.070 (78.0)3.320 (84.3)3.450 (87.6)

TABLE III

ConnectorSpecification


ConnectorSeries



ConnectorSeries



ConnectorSeries

A

C

MIL-C-5015MIL-C-26482MIL-C-81073MIL-C-8372340M39569

DEF 5326-3LN 29504

NFC 93422PAN 6432-1PAN 6432-2PATT 602

MIL-C-22992

MS3400IIIII

I & III

HE302

R

MIL-C-26482

MIL-C-26500

MIL-DTL-3899940M38277NFC 93422NFC 93422PAN 6433-1PATT 614PATT 616

MIL-C-28840

MIL-DTL-38999

MIL-C-81511MIL-C-81511

VG 95329MIL-C-83723

LN 29729NFC 93422PAN 6433-2PATT 615VG 96912PATT 105PATT 603PATT 608

I

ALUM

I & II

HE 309HE 309

III & IV

D

E

F

G

H

J

K

L

S

I & IIIII & IV

II

HE306

TABLE II

Metric dimensions (mm) are indicated in parentheses.

esigned for use in oceanographic, geophysical, naval and other severe environments, Glenair's line of shipboard interconnect products withstand exposure to extreme temperatures and corrosives. Our shipboard products have been used in surface and submarine

It's cold. It's wet.It's out in the middle of nowhere.

Just the kind of place for Glenair'sConduit, Connectors and Cables.

naval applications as well as offshore oil drilling, seabed exploration, and pipeline inspection systems. The products are available as discrete components or as engineered assemblies and interconnect systems.

D

1211 Air WayGlendale, California 91201-2497

Telephone: 818-247-6000 · Facsimilie: 818-500-9912 · EMail: [email protected]

U n i t e d K i n g d o m · Germany · Scandinavia · France · Italy

www.glenair.com

Con

duit

Syst

ems




T

Swivel Design, Self-Locking Couplings, Environmental Sealing—Truly the FIRST and Last Conduit System You'll Ever Need

Glenair FIRST Fittings and Adapters for Series 75 Metal-Core Conduit (750-145 & 750-147)

General Information

he Glenair Field Installable and Repairable Shipboard Termination (FIRST) Conduit

System consists of easily installed, two-piece conduit fittings and Glenair's Series 75 metal core conduit (750-145 and 750-147).

The FIRST System provides optimized shielding, extreme environment sealing, and corrosion protection. The self-locking coupling system, with its front swivel and rear coupling nut wave-form spring, ensures continued protection even under conditions of severe

shock, vibration and cable torque. No other system on the market is easier to install or repair, and no special tools are required. Installation time is greatly reduced, and service life is increased.

Body configurations are available in straight, 45° and 90°. The selection of end-fittings and adapters support all military standard connectors, bulkhead feed-throughs, branching hardware, pipe threads and stuffing tubes.

PRODUCT FACTS Broad Spectrum RFI/EMI/EMP Shielding

Interchangeability with Entraco*

Reduced Radar Cross section

Easy Installation and Repair

Low-Smoke Zero Halogen Jacketing

360° Grounding Swivel Design Self-Coupling Adapters with Wave-Form Anti-Decoupling Springs

* ENTRACO is a trademark of Icore Int'l, Inc., a part of Smiths Industries

Conduit

Systems





Testing

Test Requirements

Interchangeability

Sulfur Dioxide Salt Fog

Salt Spray Test

Shielding Effectiveness

Surface Transfer Impedence Test

Core Grounded to End Fitting

360 Degree Grounding of Swivel

Test Method

Glenair will use the same metal core, braids and jacket as Entraco* to insure interchangeability. A sample of an Entraco* fitting mated with Glenair conduit and visa versa will be subjected to Shielding effectiveness and Transfer Impedence Testing.

ASTM B 117 with sulfur dioxide gas, 28 Days for 316L Fittings, 200 Hours for Plated Aluminum Fittings. Shielding Effectiveness Testing will be repeated after Sulfur Dioxide Salt Fog.

Aluminum Parts: MIL-STD-1344 for 2,000 Hours.

MIL-STD-1344, Method 3008, Frequency Range 100 MHz - 10 GHz; 58 dB minimum.

MIL-C-24758 Frequency Range 1 kHz - 100 MHz.

When assembled, the core must be grounded to the end fitting and captured by a groove to prevent chafing. Visual Inspection.

Visual Inspection.

Testing Performed By

Glenair Quality Assurance and Elite Electronics Engineering

National Technical SystemsFullerton, California

National Testing SystemsFullerton, California

Elite Electronics EngineeringChicago, Illinois

National Technical SystemsFullerton, California

Glenair Quality Assurance

Glenair Quality Assurance

Test Samples

Entraco* Conduit with Glenair Fittings, Glenair Conduit with Entraco* Fittings

Glenair Conduit with Pipe Thread Fittings

Glenair Conduit and Pipe Thread fittings

Glenair Conduit with Pipe thread Fittings, Entraco* Conduit with Glenair Fittings, Glenair Conduit with Entraco* Fittings

Glenair Conduit with Pipe thread Fittings, Entraco* Conduit with Glenair Fittings, Glenair Conduit with Entraco* Fittings

Glenair Conduit with Pipe Thread Fittings

Glenair Conduit with Pipe thread Fittings


Con

duit

Syst

ems




Glenair and Entraco* FIRST/SEA FROST Cross Reference(Note: Both systems use the same Dimensions–which is the Key to Interchangability)

General Features

Glenair/Entraco* Interchangability

Superior EMI/EMP Shielding

Superior Environmental Sealing

Superior Corrosion Protection

Easily Installed and repaired

Reduced Installation Cost

Self-Locking Coupling System

Two-Piece Design with Swivel

Detailed Design Features

(1) Fitting Materials:

316 CresNickel/Teflon Plated AluminumZinc/Nickel Plated Aluminum

(2) Continuous Conduit Length(50’ - 200’ Lengths)Less scrap/Cost savings

(3) Grounded Swivel Design

(4) Grounded Outer Shield (Braid)

(5) Grounded Inner Core

(6) Environmental Jacket Material

Black NeopreneGray EPDM

(7) Brass Core Material

(8) Braid materials

28 ga Bronze Phosphorus 34 ga Tin Copper

(9) Self-Locking Mechanism

(10) Complete Environmental sealing

Rear Jacket seal Swivel O-Ring Seal Lock Mechanism O-Ring Seal

Glenair“FIRST”

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

YesYesYes

Yes

Yes

Yes

Yes

YesYes

Yes

YesYes

Yes

YesYesYes

Entraco*“SEA FROST”

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

YesYes—

No(Random Lengths)

Yes

Yes

Yes

YesYes

Yes

YesYes

Yes

YesYesYes


Entraco Cross Reference


Conduit

Systems





1 of 1

750-145Series 75 EMI/RFI Shielded Metal-Core Conduit

Black Neoprene Jacketed for FIRST Adapters and Fittings

Metric Dimensions (mm) are indicated in parentheses.

Conduit

Jacket

BA

Bronze Inner Shield

Tin Copper Outer Shield

Length

750-145-16 Product Series

Basic Part No.

Dash Number(Table I)

DashNumber

1624324048

A DiaMin

.485 (12.3)

.735 (18.7)

.985 (25.0)1.235 (31.4)1.485 (37.7)

B DiaMin

.867 (22.0)1.100 (27.9)1.450 (36.8)1.677 (42.6)1.960 (49.8)

Min BendRadius

2.250 (57.2)2.250 (57.2)3.750 (95.3)4.750 (120.7)5.500 (139.7)

TABLE I

Sizes from .250 (6.4) to 3.00 (76.2) are available upon request

Con

duit

Syst

ems





1 of 1


DashNumber

1624324048

A DiaMin

.485 (12.3)

.735 (18.7)

.985 (25.0)1.235 (31.4)1.485 (37.7)

B DiaMin

.867 (22.0)1.100 (27.9)1.450 (36.8)1.677 (42.6)1.960 (49.8)

Min BendRadius

2.250 (57.2)2.250 (57.2)3.750 (95.3)4.750 (120.7)5.500 (139.7)

TABLE I

750-147-16 Product Series

Basic Part No.


Conduit

Jacket

BA

Bronze Inner Shield

Tin Copper Outer Shield

Length

750-147Series 75 EMI/RFI Shielded Metal-Core Conduit

Grey Neoprene Jacketed for FIRST Adapters and Fittings

Sizes from .250 (6.4) to 3.00 (76.2) are available upon request

Conduit

Systems





1 of 1

Conduit shown for reference only. To be ordered separately.

E ConduitI.D. Typ

2.500 (63.5) Max

1.750 (44.5)Max Typ

F1 Hex Flats Typ

F2 Hex Flats Typ(See Note 2)

B Hex Flats Typ (See Note 2)

C Typ

A ThreadTyp

SYMBOL SSTRAIGHT

SYMBOL H45°

SYMBOL J90°

712-460 FIRST Swivel Adapter for Glenair Conduit Fittings

Mates with Series 75 Metal-Core Conduit (750-145 & 750-147)


712 S 460 Z21 24 12Basic Part No.


Basic Number

Dash Number (Table II)

Dash Number (Table I)

Material/Finish (Table III)

NOTES:1. For Thread (Table I) or Conduit (Table II) sizes not shown, please

consult factory for availability.2. Dimensions of "B" and "F2" Hex Flats may vary based on "A" Thread and

Conduit size ordered. "F2" Hex Flats will be determined by the larger of the two, but no smaller than "F2" specified in Table II.

Con

duit

Syst

ems





TABLE III: MATERIAL AND FINISHMaterial

Aluminum AlloyBrass

316 Cres

Finish

Zinc Nickel(500-Hour Salt Spray)

Passivate

Symbol

ZNBZN

Z21

DashNumber

1624324048

ERef

.500 (12.7)

.750 (19.1)1.000 (25.4)1.125 (28.6)1.500 (38.1)

F1/F2 HexFlats

1.375 (34.9)1.625 (41.3)

2.000 (50.8)2.250 (57.2)2.750 (69.9)

TABLE II

712-460 FIRST Swivel Adapter for Glenair Conduit Fittings


DashNumber

2428323640424856

A ThreadClass 2B

3/4-20 UNEF7/8-20 UNEF

1-20 UNEF1 1/8-18 UNEF1 1/4-18 UNEF

1 5/16-18 UNEF1 1/2 -18 UEF1 3/4-18 UNS

B HexFlats

.875 (22.2)1.000 (25.4)1.125 (28.6)1.250 (31.8)1.375 (34.9)1.438 (36.5)1.625 (41.3)1.938 (49.2)

C+ .010

.505 (12.8)

.630 (16.0)

.755 (19.2)

.880 (22.4)1.005 (25.5)1.005 (25.5)1.193 (30.3)1.505 (38.2)

TABLE I

Mates with 710-498 & 710-702

Bulkhead Feed-Thru Adaptersand Other Glenair

Adapters and Transitions

Conduit

Systems





1 of 1


E ConduitI.D. Typ

D1.750 (44.5)

Max

F1 Hex Flats Typ


C Hex Flats Typ (See Note 2)

B Fitting I.D.

A ThreadTyp

SYMBOL SSTRAIGHT

SYMBOL H45°

SYMBOL J90°

DRef

DRef

712-461 Glenair FIRST Swivel Pipe Thread Fitting



712 S 461 Z21 16 16Basic Part No.


Basic Number







Con

duit

Syst

ems






Aluminum AlloyBrass

316 Cres

Finish


Passivate

Symbol

ZNBZN

Z21

DashNumber

121624324048648096

A ThreadN P T3/8 - 181/2 - 143/4 - 14

1 - 11 1/21 1/4 - 11 1/21 1/2 - 11 1/2

2 - 11 1/22 1/2 - 8

3 - 8

BI.D.

.375 (9.5)

.500 (12.7)

.750 (19.1)1.000 (25.4)1.250 (31.8)1.500 (38.1)2.000 (50.8)2.500 (63.5)3.000 (76.2)

C HexFlats

1.000 (25.4)1.120 (28.4)1.370 (34.8)1.620 (41.1)1.870 (47.5)2.120 (53.8)2.750 (69.9)3.250 (82.6)3.750 (95.3)

D1.400 (35.6)1.580 (40.1)1.590 (40.4)1.790 (45.5)1.810 (46.0)1.830 (53.1)1.860 (46.5)2.370 (60.2)2.430 (61.7)

TABLE I

712-461 Glenair FIRST Swivel Pipe Thread Fitting


DashNumber

1624324048

ERef

.500 (12.7)

.750 (19.1)1.000 (25.4)1.125 (28.6)1.500 (38.1)

F1/F2 HexFlats

1.370 (34.8)1.620 (41.1)2.000 (50.8)2.250 (57.2) 2.750 (69.9)

TABLE II

Conduit

Systems





1 of 1

712-462 Glenair FIRST Swivel Stuffing Tube Fitting




F ConduitI.D. Typ

.22Ref

1.750 (44.5)Max

G1 Hex Flats Typ

G2 Hex Flats Typ(See Note 2)

C Hex Flats Typ (See Note 2)

EA ThreadTyp

SYMBOL SSTRAIGHT

SYMBOL H45°

SYMBOL J90°


consult factory for availability.2. Dimensions of "C" and "G2" Hex Flats may vary based on "A" Thread and

Conduit size ordered. "C" Hex Flats will be determined by the larger of the two, but no smaller than "G2" specified in Table II.

D

B FittingI.D.

.ERef

.ERef

712 S 462 Z21 16 BBasic Part No.


Basic Number




Con

duit

Syst

ems






Aluminum AlloyBrass

316 Cres

Finish


Passivate

Symbol

ZNBZN

Z21

DashNumber

1624324048

ERef

.500 (12.7)

.750 (19.1)1.000 (25.4)1.125 (28.6)1.500 (38.1)

G1/G2 HexFlats

1.370 (34.8)1.620 (41.1)2.000 (50.8)2.250 (57.2)2.750 (69.9)

TABLE II

Size LetterDesignator

ABCDEFGJKLMNPR

A ThreadClass 2B7/8-12 UN1-12 UNF

1 1/8-12 UNF1 1/4-12 UNF1 1/4-12 UNF1 5/16-12 UN1 1/2-12 UNF

1 5/8-12 UN1 3/4-12 UN

1 13/16-12 UN2-12 UN

2 1/16-12 UN2 3/16-12 UNS2 5/16-12 UNS

BI.D.

.406 (10.3)

.515 (13.1)

.640 (16.3)

.750 (19.1)

.812 (20.6)

.843 (21.4)

.953 (24.2)1.062 (27.0)1.171 (29.7)1.265 (32.1)1.406 (35.7)1.515 (38.5)1.625 (41.3)1.750 (44.5)

C HexFlats Min

1.130 (28.7)1.130 (28.7)1.250 (31.8)1.380 (35.1)1.380 (35.1)1.500 (38.1)1.750 (44.5)1.880 (47.8)1.880 (47.8)2.000 (50.8)2.250 (57.2)2.250 (57.2)2.380 (60.5)2.500 (63.5)

DDim

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8)

.190 (4.8).250 (6.4).250 (6.4).250 (6.4).250 (6.4)

DDim

1.060 (26.9)1.060 (26.9)1.060 (26.9)1.060 (26.9)1.060 (26.9)1.190 (30.2)1.190 (30.2)1.190 (30.2)1.500 (38.1)1.500 (38.1)1.500 (38.1)1.560 (39.6)1.560 (39.6)1.560 (39.6)

TABLE I

712-462 Glenair FIRST Swivel Stuffing Tube Fitting


Conduit

Systems




712-464 Glenair FIRST Swivel Adapter Connector Fitting




1 of 1


E ConduitI.D. Typ

2.500 (63.5) Max

1.750 (44.5)Max Typ

F1 Hex Flats Typ


C Typ (See Note 2)

A ThreadTyp

SYMBOL SSTRAIGHT

SYMBOL H45°

SYMBOL J90°

712 A S 464 Z21 16 16Basic Part No.

Connector Designator



Shell Size (Table I)


Basic Number




Con

duit

Syst

ems






Aluminum AlloyBrass

316 Cres

Finish


Passivate

Symbol

ZNBZN

Z21

ConnectorDesignator

A C D E F G H J

MilitarySpecification

MIL-C-5015 MS3400 SeriesMIL-C-26482 Series IIMIL-C-83723 Series I & IIIMIL-C-22992 Cl. C & RMIL-C-26482 Series IMIL-C-26500 Cl. F, G & RMIL-DTL-38999 Series I & IIMIL-C-28840MIL-DTL-38999 Series III & IVMIL-C-81511 Series I, II, III & IV

AvailableShell Sizes

08

x080808x

0908

10

x101010111110

12

121212121313x

14

14141414151514

16

16161616171716

18

18181818191918

20

202020x

232120

22

22222222252322

24

24242424292524

28

28xxx

33xx

32

32xxxxxx

36

36xxxxxx

40

40xxxxxx

44

xxxxxxx

48

xxxxxxx

TABLE I

DashNumber

1624324048

ERef

.500 (12.7)

.750 (19.1)1.000 (25.4)1.125 (28.6)1.500 (38.1)

F1/F2 HexFlats

1.370 (34.8)1.620 (41.1)2.000 (50.8)2.250 (57.2)2.750 (69.9)

TABLE II

712-464 Glenair FIRST Swivel Adapter Connector Fitting


Conduit

Systems





1 of 1

710-498FIRST Bulkhead Feed-Thru Adapter



WeatherSeal

E

2.500 (63.5) Max

1.750 (44.5)Max

O-Ring

B

D Hexon Fitting

and Jam Nut

Washer

A ThreadMates with Glenair Fitting Series 712-460

CMounting

Hole

.188(4.8)

.188 (4.8)

710-498 Z21-24 Basic Part No.

Basic Number


Material/Finish (Table II)

Con

duit

Syst

ems





DashNumber

2428323640424856

A ThreadClass 2A

3/4-20 UNEF7/8-20 UNEF

1-20 UNEF1 1/8-18 UNEF1 1/4-18 UNEF

1 5/16-18 UNEF1 1/2-18 UNEF

1 3/4-18 UNS

C Dia+.030 (0.8) -0

.750 (19.1)

.880 (22.4)1.000 (25.4)1.130 (28.7)1.250 (31.8)1.310 (33.3)1.500 (38.1)1.750 (44.5)

DHex

1.000 (25.4)1.125 (28.6)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)2.000 (50.8)

ELength

1.000 (25.4)1.000 (25.4)1.000 (25.4)1.000 (25.4)1.000 (25.4)1.000 (25.4)1.000 (25.4)1.130 (28.7)

BDia

.505 (12.8)

.630 (16.0)

.755 (19.2)

.880 (22.4)1.005 (25.5)1.005 (25.5)1.193 (30.3)1.505 (38.2)

TABLE I

710-498FIRST Bulkhead Feed-Thru Adapter


TABLE II: MATERIAL AND FINISHMaterial

316 Cres

Finish

Passivate

Symbol

Z21

Conduit

Systems




710-702FIRST Bulkhead Feed-Thru Adapter Reducer




1 of 1

FI. D.

WeatherSeal

C .465(11.8).425

(10.8)

O-Ring

D Hexon Fitting

and Jam Nut

Washer

BMounting

Hole

.188(4.8).188 (4.8)

E ThreadMates with Glenair Fitting Series 712-460

A Thread

710-702 Z21-28 24 Basic Part No.

Basic Number



Material/Finish (Table II)

Con

duit

Syst

ems





DashNumber

28323640424856

A ThreadClass 2A

7/8-20 UNEF1-20 UNEF

1 1/8-18 UNEF1 1/4-18 UNEF

1 5/16-18 UNEF1 1/2-18 UNEF

1 3/4-18 UNS

C+.020

.750 (19.1)

.750 (19.1)

.750 (19.1)

.750 (19.1)

.750 (19.1)

.750 (19.1)

.880 (22.4)

DHex

1.125 (28.6)1.250 (31.8)1.375 (34.9)1.500 (38.1)1.625 (41.3)1.750 (44.5)2.000 (50.8)

Max EThread

3/4-207/8-20

1-201 1/8-181 1/4-18

1 5/16-181 1/2-18

B Dia+.030 (0.8) -0

.880 (22.4)1.000 (25.4)1.130 (28.7)1.250 (31.8)1.310 (33.3)1.500 (38.1)1.750 (44.5)

TABLE I

DashNumber

24283236404248

E ThreadClass 2A3/4-20 UNEF7/8-20 UNEF

1-20 UNEF1 1/8-18 UNEF1 1/4-18 UNEF

1 5/16-18 UNEF1 1/2-18 UNEF

FI.D.

.505 (12.8)

.630 (16.0)

.755 (19.2)

.880 (22.4)1.005 (25.5)1.005 (25.5)1.193 (30.3)

TABLE II

710-702FIRST Bulkhead Feed-Thru Adapter Reducer



316 Cres

Finish

Passivate

Symbol

Z21

Conduit

Systems





1 of 1

717-148 FIRST Special Purpose Reducer Stuffing Adapter



.030x45°

Weather Seal

2.500 (63.5)

.750(19.1)

D

B Thread

E

A Thread

.1.060(26.9)

1.720(43.7)

.188 (4.8)

717-148-ABProduct Series

Basic Part No.


C

DashNumber

ABCDDGBCBD

A ThreadClass 2A

7/8-12 UN1 1/8-12 UNF1 1/4-12 UNF

1-12 UNF1-12 UNF

B ThreadClass 2B

1-12 UN1 1/4-12 UN

1 1/2-12 UNF1 1/8-12 UNF1 1/4-12 UNF

CDia

.406 (10.3)

.640 (16.3)

.953 (24.2)

.515 (13.1)

.515 (13.1)

DDia

1.130 (28.7)1.380 (35.1)1.630 (41.4)1.250 (31.8)1.380 (35.1)

E HexFlats

1.130 (28.7)1.380 (35.1)1.750 (44.5)1.250 (31.8)1.380 (35.1)

TABLE I

The Right Wire Protection Solution for Every Shipboard ......Every Shipboard Application Glenair...

Documents

Transcript of The Right Wire Protection Solution for Every Shipboard ......Every Shipboard Application Glenair...