THE ONLY SYSTEM DESIGNED EXCLUSIVELY FOR THE BILLBOARD MARKET BY BILLBOARD SAFETY EXPERTS.

Formetco developed the only system that protects the worker from the ground through the transition to the upper catwalk.

LOWER FIXED LADDER UPPER FIXED LADDER

100% HOOKUP FROM GROUND TO DECK

Rear mounted with an integratedintermediate anchorage point

SAFE MOUNT – Mounting hardware is located behind the ladder rungs, creating a safer climb with greater ladder access area. This placement minimizes clothing catches and bodily harm such as cuts, scrapes and bruising from striking obtrusive hardware.

SEAMLESS JOURNEY – Whether ascending or descending, cable guides are designed to allow the cable sleeve to pass through with ease, providing a seamless journey from connection point to disconnect. This design innovation allows the climber to keep both hands free to focus on climbing.

SIMPLE INSTALL – The top bracket rests on the ladder rungs, making this the fastest and most cost-effective installation of any system available today.

SAFE, SEAMLESS, SIMPLE

LADDER-GRAB + LADDER STABILIZER

The Formetco Ladder Stabilizer is the FIRST STEP in protecting the climber from the ground to

the deck

The Ladder Stabilizer fits all extension ladders. The Stabilizer’s

trough is designed to position ladders at an angle of 75.5°. A pin, secured with a lanyard, locks the ladder in place satisfying OSHA

standard 1-1.14 Section II-5

Workers are able to climb without holding a rope, or

ratchet to tie off ladder

Designed and engineered to meetANSI A14.3ANSI Z359.16OSHA 1910.29

BILLBOARD INDUSTRY BEST WARRANTY

8 3 3 - 2 4 9 - 2 2 2 6

h a r d w a r e s a l e s @ f o r m e t c o . c o m

f o r m e t c o . c o m