The National Forest Create a Farm Woodland
Transcript of The National Forest Create a Farm Woodland
-
8/8/2019 The National Forest Create a Farm Woodland
1/46
A toolkit to help you plan and plantA toolkit to help you plan and plant
From experiences in The National ForestFrom experiences in The National Forest
-
8/8/2019 The National Forest Create a Farm Woodland
2/46
Create a farmwoodland
A toolkit to help you plan and plant
Compiled by Hugh Williams
The National Forest Company
From experiences in The National Forest
-
8/8/2019 The National Forest Create a Farm Woodland
3/46
Funding for this guide has been obtained from the National Forest Company, the
Forestry Commission and the Leicester Shire Economic Partnership. The
preparation and advice provided by Ian Thompson and Chris Wait (both from
ADAS) is gratefully acknowledged. Lastly, but most importantly, this guide has
been prepared with advice and experience obtained from many landowners who
have created and continue to manage their woodlands in The National Forest.
Copyright The National Forest Companywww.nationalforest.org
First published in 2003 by The National Forest Company, Enterprise Glade,
Bath Lane, Moira, Swadlincote, Derbyshire DE12 6BD
ISBN 0 85538 464 6
Editing and design: Jenny Claridge, Forest Research, Farnham, Surrey
Studio design and printing: Colourgraphic Arts, Bordon, Hampshire
Cover photos: View over just-planted woodland at East Hill, Tatenhill, 1998.
Marking out using a spray boom; a redstart; trees establishing in weed-free rows.
Photo credits: Christopher Beech, Rob Fraser and Martyn Pitt;
Forest Research Photo Library; Forest Life Picture Library
Illustrations on pages 22 and 26: John Williams, Forest Research
Acknowledgements
ii
-
8/8/2019 The National Forest Create a Farm Woodland
4/46
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Why plant a farm woodland? . . . .Timber production . . . . . . . . . . . . . . . . . . . . . . . . . 2
Shelter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Game cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Recreation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wildlife habitats . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Landscape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Woodland design . . . . . . . . . . . . . . . .Type of woodland . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Woodland layout . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tree spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Tree suitability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Planting . . . . . . . . . . . . . . . . . . . . . . . . . .How to plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Types of trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When to plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Site preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Marking out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Types of hand planting . . . . . . . . . . . . . . . . . . . . . 20
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Protection . . . . . . . . . . . . . . . . . . . . . . . .Weed protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Protection against animal damage . . . . . . . . . . 26
Maintenance . . . . . . . . . . . . . . . . . . . . .Keeping the trees growing . . . . . . . . . . . . . . . . . 28
Replacing dead trees . . . . . . . . . . . . . . . . . . . . . . 30
Ongoing management . . . . . . . . . . . . . . . . . . . . . 30
Looking ahead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Sources of further information and advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Contents
iii
-
8/8/2019 The National Forest Create a Farm Woodland
5/46
iv
Inviting children to help plant new woodland is an
excellent and popular way of involving local people. Over
150 local schoolchildren took part in this planting at
Chestnut Woodland, Moira.
-
8/8/2019 The National Forest Create a Farm Woodland
6/46
Farmers dont make foresters is one of the many myths that have been
shattered by the creation of The National Forest and other community forestry
projects throughout the country. In The National Forest, some of our finest
young woodlands are now being planted and managed by landowners and
managers who have never before even contemplated such an enterprise.
Nevertheless, it is not reasonable to expect such newcomers to have
immediately to hand all the knowledge, techniques and skills needed to create
and look after a new woodland.
Whether the primary purpose of woodland is for growing quality timber, for
nature conservation or for amenity, good management is both essential and
rewarding. A viable market for woodland products is the best driver for this
management and that is something we are working towards in The National
Forest. But knowledge of best practice is also vital.
We have had many pleas from owners considering a woodland scheme, andfrom those who have already taken the plunge, for a clear, practical manual
covering the basics of designing their woodland, getting it well established and
its longer-term management.
Creating a woodland is a real commitment but enormously satisfying. We hope
that this book will provide a helping hand and reassurance.
Susan Bell, OBE
Chief Executive, The National Forest Company
Foreword
v
-
8/8/2019 The National Forest Create a Farm Woodland
7/46
vi
The extensive new woods at Grangewood (60 ha) and
adjoining Park Farm (82 ha) show the part woodland
can play in assisting farm diversification and
enhancing the landscape.
-
8/8/2019 The National Forest Create a Farm Woodland
8/46
All woodland, regardless of where it is located, provides opportunities that far exceed
the trees alone. It can help landowners to diversify their landholding and business
interests, create commercial and/or amenity benefits and can be linked with work
that enhances or creates opportunities for recreation, public access and tourism.
The National Forest is creating, through working partnerships and with community
participation, a new 200 square mile multi-purpose woodland for the nation in the
heart of England. Ultimately 30 million trees will be planted which will cover a thirdof the Forest area. The National Forest is steadily turning what was once one of
the least wooded parts of England into a sustainable forest for the 21st century
and beyond.
The aim of this book is to provide information for landowners who are thinking
about creating new woodland. Although every woodland scheme may have its
own set of unique particulars, the extensive experience of landowners within The
National Forest has demonstrated that there are robust guidelines that can beapplied to most situations. This book draws these guidelines together.
For more information on The National Forest contact www.nationalforest.org
Helping you to achieve your woodland
When you decide to create a new woodland first thoughts should be about why
you want one. The first section in this book looks at some common objectives for
planting a woodland. Having decided on your objectives, you need to design thewoodland, thinking about tree species and how the individual trees are laid out.
That is also the time to consider future management tasks, such as weeding,
because they will influence your decisions. When it comes to planting your wood,
there are a number of factors to consider; the middle section of the book looks at
various factors, from the choice of young (nursery) stock through to the tools used
in planting, to help ensure success. Getting the trees into the ground is a great
achievement but only the start of the story. So finally, we look at ways of protecting
them from damage (such as browsing), controlling weed competition andmaintaining them so that the wood you thought about at the planning stage
materialises successfully.
Introduction
1
-
8/8/2019 The National Forest Create a Farm Woodland
9/46
Well before a single tree is planted, it is very important to think about the
purpose of the woodland. Your aims will affect what woodland species will be
planted and how they will be managed. It is also essential to think of how the
woodland will fit into the wider context of the landholding. For example:
Will the woodland maximise the non-woodland benefits of the landholding?
Could the woodland provide a setting for other interests such as lakes,
caravan parks, game shooting?
Factors such as these fundamentally affect the nature of the woodland created
and must be given careful and thorough consideration. Seeking early advice is
recommended. Sources of further information and advice are provided on
pages 3336.
We need to start somewhere
There are many reasons for planting woodland. These include:
timber production provision of shelter
screening
game cover
Timber production
Timber production can be for use on the farm, for example fencing posts, or for
commercial purposes, or both. Most (70%) of the current national timber demand
is for softwood (coniferous trees) but this market is subject to major pressure from
imports. The longer-term strategy within The National Forest is to produce high
quality timber. The majority of trees (in excess of 80%) planted in The National
Forest are hardwoods (broadleaved trees).
Shelter
Shelter can provide increased productivity for agricultural crops or livestock
enterprises through improvements in the local microclimate. Opportunities for
new or earlier crop production may be possible. The working or living environment
around homesteads or workplaces can be enhanced.
Why plant a farm woodland?
2
an educational resource formal and informal recreation opportunities
creating wildlife habitats
creating a landscape feature
-
8/8/2019 The National Forest Create a Farm Woodland
10/46
Screening
Woodlands can act as a screen to existing or proposed development, reduce
traffic noise or protect an area from dust and smells. Creating a woodland as a
screen can enhance recreational activities and accommodate high numbers of
people while minimising the impact on the local environment.
Game cover
Many existing mature woodlands were originally planted for game cover. Newlyplanted woodland can provide high value for game and wildlife improvement. A
mixed conifer and broadleaved woodland with a significant proportion of woody
shrubs usually provides the best game wood. A carefully designed woodland is
required to maximise shooting potential. For example, the woodland must not be
draughty so good ground cover is required and perimeter hedging could be
planted. The positioning and location of glades and rides is also important. Seek
specialist advice from organisations such as the Game Conservancy Trust who
have a range of helpful information.
Education
Woodlands can provide a wide range of
educational opportunities, from a half
day tree planting event involving local
schools to focused programmes that
involve aspects of the national
curriculum, university studies or specificarts projects. Woodland tasks such as
tree planting, weeding, thinning and use
of timber products can provide an
opportunity to train volunteers or new
entrants to the industry in forest skills. In
the wider context the general public
often enjoy being involved in woodland
projects and can learn a great dealabout their local environment.
3
Tree planting is a great community activity, often
involving local schools, and provides an opportunity to
learn about and improve the local environment.
-
8/8/2019 The National Forest Create a Farm Woodland
11/46
Recreation
Woodland recreation can take many
forms. Game shooting has already
been mentioned, but there are many
opportunities that a woodland setting can offer from informal walking to specialist
organised events. These may include horse riding, carriage driving, mountain
biking, paint balling, motorbike scrambling, four-wheel drive courses, caravan
sites, timber cabins, camping, show arenas for specialist events, nature watchingand fishing. There are opportunities to make money from all these activities.
Wildlife habitats
Planting woodland creates habitats for a variety of
plants and animals. These range from the invertebrates
such as beetles and spiders that live on the forest floor
to birds and mammals, and from mosses and flowering
plants to lichens that will inhabit the mature woodland.Ancient woodland (where there has been continuous
woodland cover since at least 1600 AD) is the most
diverse woodland habitat. If ancient woodland exists on
or adjacent to a site then extending and protecting this
feature will be of utmost importance.
Broadleaved woodland has a greater wildlife value than
coniferous (see page 6), but a compromise can befound with the creation of mixed woodland. Shrub and
coppice and open ground areas all provide useful
wildlife habitats. Woodland schemes make provision for
both of these habitats so they should be considered in
the design. Indeed, unplanted land can provide great
opportunities for wildlife and can add significant value.
4
The redstart a BAP species which
ikes a mosaic of woodland habitats in
which it can feed and nest.
stalling boxes for the Noctule bat is one
feature of the National Forests
Biodiversity Action Plan (BAP) and is
equently part of new woodland schemes.
From arable fields to fishing lakes in just 1 year.
Beehive Farm at Rosliston is one example of the
way private landowners can use woodland creation
to help in farm diversification.
-
8/8/2019 The National Forest Create a Farm Woodland
12/46
Many additional features can be provided within a woodland context. These
include open water, wetlands, scrapes, reed beds, coppice, existing riverside
trees, ancient hedgerow trees, parkland trees, avenues, reinstating hedgerows,
planting of wildflowers and the creation of traditional hay meadows.
Landscape
Using available information and
studying the existing landscape willhelp determine the scale and type of
woodland that may be appropriate.
Large-scale woodlands may suit
large open arable landscapes
whereas discrete woodlands may fit
better where small fields create a
more intimate setting.
The choice of species can also be
influenced by the surroundings.
Using natural regeneration in preference to planting should be considered next to
existing ancient and semi-natural woodlands. Traditional native species are
appropriate next to ancient woodland sites, whereas more exotic species may be
considered in a parkland style woodland. In an arable landscape single species
plantations can be appropriate.
Maintaining views to and from a
woodland are very important,
particularly where there are
interesting landmarks such as
church spires, and unusual or
special natural features, and should
be allowed for in the design.
Well-designed, well-managedwoodlands can increase the value
and desirability of a property.
5
The land around Bagworth in the Midlands Coalfield
has seen a significant increase in new woodland.
Mature hedges, boundary trees and church spires,
as seen here at Lullington, are important landscape features
to consider when planning new woodland.
-
8/8/2019 The National Forest Create a Farm Woodland
13/46
6
Woodland design
There are many different aspects to consider when designing a woodland plan.
The main aspects are:
1. Type of woodland 2. Woodland layout 3. Tree spacing 4. Tree suitability
Type of woodland
Broadly there are four types of woodland that can be planted. A scheme may
consist of one, some or all of the four main types described in Box 1.
BOX 1 I Main woodland types and additional elements
s BroadleavedTypically consisting of major (dominant) species such as oak, ash, wild cherry and sweet chestnut.They can be grown for commercial reasons and if managed correctly will produce high value cropsin the long-term (60 years). Certain broadleaved species may need pruning to maintain their quality.Thinnings will be taken throughout the life of the woodland and will start when the woodlands are2025 years old.
s ConiferousTypically Scots or Corsican pine, larch or spruce, these are commercial crop trees. They are fastergrowing and have the potential to provide early saleable timber. Typically the first crop, the thinnings,will be taken from approximately 20 years of age and then every 7 to 10 years until the cropreaches maturity (at 4060 years old) when it can be felled.
s Mixed broadleaved and coniferousThis type of woodland mixes the two types and provides a compromise giving the increased wildlifebenefits of broadleaf woodland with the quicker timber production associated with conifers. There ishowever a need to consider the scale of the woodland, as small mixed woodland can negateeconomies of scale, providing insufficient amounts of either hardwoods or softwoods to beeconomic to manage.
s Fast growing broadleavesThese are fast growing trees, usually poplars, grown under very specific planting and management
regimes to provide a final crop in a relatively short time frame of between 20 and 30 years.
Additional woodland elements
s ShrubsShrubs form an important component of any woodland planting, providing cover for game birds,wildlife habitats and nesting sites for a variety of species. Some, particularly hazel, provide minortimber products.
s HedgerowsAn important feature of the landscape, hedgerows act as corridors for wildlife, link woodlandstogether, provide natural barriers and, where they encircle the woodland, add warmth to thewoodland floor.
s Individual treesPlanting unusual tree species (such as wild service tree, holm oak, wellingtonia) in small groups inan avenue or parkland style in open ground can provide a unique feature to the woodland.Be a little different!
-
8/8/2019 The National Forest Create a Farm Woodland
14/46
7
Woodland layout
The layout of the woodland has to consider a number of important factors:
1. Reasons for the woodland 2. Surrounding landscape
3. Existing surrounding woodland 4. Areas of sensitivity (such as watercourses,
archaeological features and nature conservation interest).
The types of woodland will have been decided at the design stage, taking intoaccount the aims of the woodland and its site conditions. The mix of species
within woodland types and their distribution now needs to be decided. There are
three options for the establishment of the trees. They can be planted as groups,
in lines or in an intimate mixture.
Groups
The advantage of this system is that in a mixed planting tree groups (varying
from 20 to 60 of each species) will grow at the same rate, ensuring survival of allthe species and resulting in a woodland that has all species represented. This is a
robust and straightforward technique which can maximise the long-term value of
the wood.
Lines
This option is the easiest to manage and suits mechanised planting and
harvesting. However, care must be taken to avoid planting different species in
alternate rows, especially on sloping ground, as this can create what is known asthe pyjama pattern, because of the obvious stripes that are visible from a
distance.
Intimate mixture
This is a random mix of the major tree species. In appearance this mix is the
most desirable but in management terms it is the most difficult to achieve. Failure
to manage correctly will result in the faster growing species shading out the
slower ones and the desired design will fail to materialise.
-
8/8/2019 The National Forest Create a Farm Woodland
15/46
8
Tree spacing
Tree spacing can vary according to the types of species being planted and the type
of woodland desired and will affect future management practice. Examples of
spacing are shown in Box 2; the one selected will depend on your objectives.
Regular spacing is much easier to manage especially when the trees are small as
it is easier to find them when they are in rows. It also allows the site manager to
consider management techniques such as mechanised inter-row swiping and
motorised spraying to control competing vegetation, methods which are fast and
efficient (see pages 18 and 25).
Tree suitability
The suitability of a tree species to a particular site will depend on a number of
factors. These include: soil condition, location, altitude and exposure. Tables 1 and
2 on pages 1011 indicate the suitability of different tree and shrub species to
location and soil conditions. Table 3 on page 11 shows the suitability of trees and
shrubs for shelter. Possible end-uses for their timber are shown in Table 4, page 12.
BOX 2 I Examples of tree spacing
s 1 m x 1 mThis spacing is preferred for withies, a type of willow coppiced and used for weaving material. In thepast it was a traditional planting distance for oak trees and results in 10,000 trees per hectare.
s 2.1 m x 2.1 mThis is the normal minimum spacing for larger woodlands where timber production is an objective.This equates to 2,250 trees per hectare. To grow quality timber, planting at greater density isfavoured. For example, a spacing of 2.1 m x 1.5 m will increase density yet still allow access formaintenance between rows.
s 3 m x 3 mThis spacing is acceptable for small woods and in cases where the prime objective is to createaccessible community woodland. This equates to 1,100 trees per hectare.
s 8 m x 8 mThis is an option often used for poplar plantations. The trees are carefully pruned and grown throughto a single crop without thinning. This results in 156 trees per hectare.
s IrregularThis may be random within rows and/or random between rows. It is preferred if a more naturalappearance is desired or if wildlife and conservation are prime objectives. This variable spacing alsoallows space for natural regeneration to supplement the planted trees. To ensure successful creationof new native woodland a density of 1,600 trees per hectare should be achieved.
Note: 1 hectare = 2.471 acres. 1 hectare has dimensions of 100 metres by 100 metres.
-
8/8/2019 The National Forest Create a Farm Woodland
16/46
9
For woodland where nature conservation is important, the number of species
can be increased. Advice is contained in FC Bulletin 112: Creating new native
woodlands, based upon the National Vegetation Classification (NVC) see
page 35. Each wooded NVC type (there are 19) is related to a particular
climatic zone and soil condition and represents the type of vegetation that would
develop if natural succession was allowed to take its full course.
When considering what species are suitable, also think about the overall
balance of the woodland and what the woodland is for. Where timber is
a main aim, concentrating on a smaller number of species may be
desired. For example, consider planting three principal timber species
(about 70% in total), two to three medium height species (20% in total)
to provide balance and colour and three to four species of woody shrubs
(10% in total) to give low cover.
-
8/8/2019 The National Forest Create a Farm Woodland
17/46
10
Table 1 I Suitability of selected tree species to site conditions
Ash
Aspen
Black poplar
Common alder
Common walnut
Crab apple
Cricket bat willow
Downy birch
Field maple
Goat willow
Larch
Large leaved lime
Pendunculate oak
Pine
Rowan
Sessile oak
Silver birch
Small leaved lime
Sweet chestnut
Whitebeam
Wild cherry
Yew
Wet / Heavy Neutral / Acid Light / Exposed Shady Contaminatedmoist alkaline dry
Soil typeSpecies
-
8/8/2019 The National Forest Create a Farm Woodland
18/46
11
Table 2 I Suitability of selected shrub species to site conditions
Wet / Heavy Neutral / Acid Light / Exposedmoist alkaline dry
Soil typeCommon name
Alder buckthorn
Almond willow
Bay willow
Blackthorn
Dog rose
Dogwood
Eared willow
Elder
Field rose
Guelder rose
Hawthorn
Hazel
Holly
Juniper
Osier willow
Privet
Purging buckthorn
Purple willow
Spindle
Wayfaring tree
Table 3 I Suitability of trees and shrubs for shelter
Narrow-crowned broadleaves foredges (many coppice well)
Tall broadleaves for heightand longevity
Shrubs for dense lower storey
Alders: common, red and grey Ash Blackthorn
Ash Oak Buckthorn
Birches: silver and downy Sycamore Dog rose
Poplars Sweet chestnut Elder
Rowan Hawthorn
Whitebeam Hazel
Willows: white, goat and crack Holly
-
8/8/2019 The National Forest Create a Farm Woodland
19/46
12
Table 4 I Tree species and possible end-uses for their timber
Broadleaved species Possible end-use
Coniferous species Possible end-uses
Alder: black and grey Turnery work, medium priced furniture and hardwood pulp.Good firewood fuel.
Ash Specialist market for sports goods, also tool handles.Burns well even when green makes excellent logs.
Birch: downy and silver Useful furniture plywood and veneer. Poorer quality timbers usedfor particleboard and pulp. Potential to create birch coppicefor fencing hurdles.
Cherry In great demand for furniture, veneer and turnery. Consider theuse of specialist species such as Wildstar; seek advice.
Hazel Traditionally used for hedge stakes and binders a developingmarket. Also used as a thatching material. Nuts are still harvested but a niche product.
Lime: small and large leaved For turnery and carving. Some furniture applications.
Maple: field Musical instruments. Wavy grain maple sought after for appearance.
Oak: pendunculate and sessile Furniture, panelling, high-class joinery and veneers.Low grades fencing and gates.
Poplar Particularly good for veneers and can be used for internal furniture.Fast growing and can be harvested within 25 years but quantity
and quality determine potential value. Seek advice.Sweet chestnut Can be split easily to make cleft fencing and stakes. Alternative to
oak in furniture products.
Walnut Potential for veneer quality timber if high quality stock planted andtrees are managed for quality. A specialist species, seek advice.
Sycamore Furniture, joinery & flooring. Quality determines price- wavy grainis particularly prized. Dont dismiss as a weed but consider riskposed by squirrel attack.
Willow: cricket bat and goat Cricket bat willow is a specialist crop so seek advice. Goat willowhas niche uses for sculpture, craft and arts work.
Larch: European and Japanese General framing, deckboards, baseboards, sometimes leading edgeboard. Fencing, gates and posts, some joinery use
Pine: Corsican and Scots Trussed rafters and general framing. Deckboards and baseboards.Fencing, gateposts, space boarding and purlins. Some joinery uses.
Spruce: Norway A species that can be used as a nurse crop, felled early and usedfor Christmas trees. However consider the increasing popularity ofvarieties more resistant to dropping their needles; seek specialistadvice.
Yew Specialist use in high quality furniture and crafts, such as yew bows.
-
8/8/2019 The National Forest Create a Farm Woodland
20/46
13
Planting
Now that you have thought about the design of your woodland, its time to get
some trees into the ground! In addition to planting techniques and the types of
trees, you need to consider site preparation and the best time of year to plant.
Seven main elements are involved in the initial planting of a wood.
1. How to plant
2. Types of trees
3. When to plant4. Site preparation
How to plant
There are four options: self-planting, hired help, professional tree planting
contractors or mechanical planters.
Self-planting
This is the cheapest option in terms of direct cost, and can be done at your ownconvenience. Be realistic about the amount of time that it may take, time which
may not be readily available or would be better used elsewhere. Typically someone
who is not used to planting will manage to plant about 400500 trees in a day.
Hired help
Using hired help will greatly reduce the physical workload but will still necessitate
organising the planting team. This requires a high level of personnel management
and the ability to interpret and implement the carefully considered design planseffectively.
5. Marking out
6. Type of planting
7. Tools
-
8/8/2019 The National Forest Create a Farm Woodland
21/46
Professional tree planting contractors
This is the more expensive option, but it does move some of the responsibility
from the owner/advisor to the planting contractor. Choose recommended
contractors who can demonstrate that they are well organised and know how to
handle delicate planting stock. It is advisable to see if they have carried out work
locally and, if they have, to speak to the landowner and visit the site. Professional
tree planters work much more quickly and can often plant up to 1,000 trees per
day. They are experienced in implementing written planting specifications. Onedisadvantage with good contractors is that everybody wants them at the same
time and availability may be an important factor.
It is accepted practice to put a tree replacement (or beat-up) clause into the
initial contract, making the contractors responsible for replacing any trees that fail
to establish over a specified time (usually the first two growing seasons). This will
encourage contractors to take better care with the initial planting.
Mechanical planter
Using a mechanical planter is cheaper than hand planting and can give significant
savings in time. A machine planter can plant as many as 10,000 trees per day in
large new woodlands with a simple layout. They are less labour intensive thanmanual planting but are not ideally
suited to sloping ground and are
dependent on drier and more friable
soil conditions. If conditions are not
perfect there can be problems with
the trees not being planted
completely upright. Drying out and
cracking of the ground can occur
where the planter has travelled,
leading to exposed roots and tree
mortality.
14
Tree mortality of 56% at the end of one growing season is consideredreasonable. If the mortality is greater than this then possible causes (suchas poor planting, poor maintenance and pests) need to be investigated.
Machine planting at Grey Lodge Wood, Ratby. Note the raised
spray booms (front) and the planting machine (rear)
mounted on the tractor.
-
8/8/2019 The National Forest Create a Farm Woodland
22/46
Planting designs have to be very simple to accommodate mechanised planting. In
practice a design which has too many species is unlikely to be accurately
replicated. Hand planting may be required to plant special tree species, areas of
trees at specific places or at awkward areas where the machine could get stuck.
Types of trees
There is a range of planting stock types to choose from and the choice will
depend on species and situation. The stock types include bare root transplants,cell grown, whips, feathered whips, standards and setts. Box 3 describes the
different types and explains the advantages and disadvantages of each. As a
general rule, for most large-scale woodland planting, it is most cost effective to
use 1520 cm cell grown conifers and 4060 cm bare rooted broadleaves. It is
recommended that the trees are sourced from a reputable forest nursery.
The National Forest is committed to the use of trees of local provenance, i.e.
those grown from British seed, which have improved growth, better chances ofsurvival and support native wildlife.
15
Bare rooted oak transplant. Cell grown oak transplant.
-
8/8/2019 The National Forest Create a Farm Woodland
23/46
16
Box 3 I Different types of planting stock
Bare root transplantsTree height will vary between 15 and 90 cmand trees will be priced accordingly. Up to 90cm in height young trees are classed astransplants and will be categorised by the timespent growing in a nursery bed and the timehardening off outdoors. For example a 1 + 1transplant is one year in a nursery bed and one
year planted out. A 1 u 1 transplant is a plantgrown for one year in a nursery bed, the rootsare then undercut in situ and grown for afurther year. This technique creates large fibrousroot systems.
Cell grownThe trees are grown from seed in trays of smallplastic cells. They are grown rapidly in plastictunnels and then hardened off outside onconcrete or raised trestles. They can vary in ageand the length of time they have been hardenedoff very young trees should be avoided.
Whips, feathered whips and standardsThese are larger trees that range from 90 cm(whips and feathered whips) to 3 m (standards).They can be purchased bare rooted (at thesmaller sizes) or rootballed. Rootballing meansthe trees come with soil attached. This improvestheir chances of survival but increases the cost.
SettsSetts are cuttings of species (typically willowand poplar) which are planted directly into theground. Willow setts are about 20 cm in lengthand can be planted at great speed and highdensity. Poplar setts are generally about 0.5 min length and can be bought with or withoutroots; unrooted poplar setts are generallypreferred and tend to establish more quickly.
AdvantagesCheapest, most widely available stock, easiestto plant and have the shortest planting season(Novemberend of March).
DisadvantagesFragile, need to be handled gently and prone todrying out. Ordering trees to be delivered in
specially made black and white bags allowsthem to be stored for up to 4 weeks in a cooland shady place prior to planting.
AdvantagesArrive with a small amount of soil, so are moreresistant to dry conditions and can be stored forlonger than bare rooted material before planting.Planting season can be extended from Octoberthrough to May.
Disadvantages
More expensive than bare root transplants. Takelonger to plant. Good planting technique isessential, as poor planting can lead to cellsbeing forced out of ground by frost. Heavier tocarry.
AdvantagesBest used in specialist situations (such asparkland, formal avenues) where an instanteffect and low numbers of trees are required.
DisadvantagesMore expensive and higher risk of losses (canbe up to 40%). Larger and heavier so more
difficult to move around and plant. May requirepit planting, the installation of drainage and (forvery large trees) specialist anchoring.
AdvantagesQuick and easy to plant. Willow setts growquickly in damper ground to give an immediatewoodland.
DisadvantagesA damp (not dry) spring is needed followingplanting otherwise many trees can die.
Type of tree Advantages and disadvantages
-
8/8/2019 The National Forest Create a Farm Woodland
24/46
17
When to plant
Trees should be planted between November and the end of March and before
they start coming into bud. Budding can be suppressed by nurseries that keep
trees in cold storage. The season can be extended from October and into May by
using cell grown stock. Planting late in the season increases the risk of tree mortality.
This is particularly critical with bare root trees as they are prone to drying out.
Site preparationIt is vital to determine whether the ground has any innate restrictions to tree
establishment. If there is any doubt, soil pits (to about 1m in depth) should be
dug at different points within the field. If restrictions (such as a plough pan,
compacted soils or very heavy clay soils) are present this could result in limited
root growth of the trees, poor growth, high mortality and possible long-term
vulnerability to being blown over. Before planting, the plough pan should be
broken up by ripping or sub-soiling.
The site preparation is dependent on the current use of the field (pasture or
arable). For example, whether the field is rough, if there is a high incidence of
weeds, and what method of future management you are contemplating.
If planting into pasture you have to decide whether or not to keep the existing
grassland sward and plant trees into it or whether to plough the field and then
re-seed with a low productivity grass or a grass/wildflower mix before planting.
Planting straight into the grassland is the cheaper option. However, establishedgrassland often harbours small populations of field voles. Closing off the site to
stock or ceasing a cutting regime can result in a vole population explosion that
will put young trees at risk (see pages 2327).
On arable fields it is important to decide whether to leave them in stubble or to
plough, cultivate and re-seed before planting. Leaving as stubble may mean
leaving tramline ruts and an uneven surface that will require remedial works and
may affect future management plans. It will also allow any weeds to colonise thesite and may make future weed control more difficult. Re-seeding provides the
advantage of knowing exactly what grass mix is present (and therefore how to
control it) and reduces colonisation by weeds.
-
8/8/2019 The National Forest Create a Farm Woodland
25/46
18
Marking out
Marking out is done for two purposes. The first is to locate the boundaries of the
planting, open space and any changes in species, for example from trees to
shrubs. This can be simply done using canes, chalk or marking paint and makesplanting easier and quicker. The second reason for marking out is to achieve
correct stocking rates and assist future management. The following methods can
be used:
1. Full grid
2. Half grid
3. Poles and string
4. Canes
Full grid
This is the quickest method of
marking out and can be done in
advance of the planting operation.
It requires a grid to be marked out
at the required spacing, both
up/down and across a field. This can be achieved by scoring the ground with a
bar attached to the back of a tractor or quad. Some sites are marked out by sub-soiler and planting undertaken at the sides of the rip lines. Both techniques will
facilitate the mechanical cutting and spraying of the weeds between the trees but
the latter can leave an uneven and sometimes cloddy surface.
Half grid
This is the same principle as a full grid but marking out is only in one direction.
This method may be used on difficult or steep terrain (which makes marking out
in two directions dangerous) or where a simplified management regime isintended. Maintenance can only be carried out in one direction the direction of
the row. Planting rods can be used to mark the distances of plants within the row.
If you decide to re-seed it is essential to use a specialist low-vigour
grass mix. Many suppliers sell specific forestry mixes. You can increase
the diversity of the grass sward by adding wildflower seed.
Spray boom being used to apply marking
out spray prior to ground being scored at
Roecliffe Wood, Packington.
-
8/8/2019 The National Forest Create a Farm Woodland
26/46
19
Poles and string
This involves marking out the
planting area with poles and
indicating the rows by string
running between them. Once in
place the string will ensure that the
row spacing is constant in one
direction. Marked planting poles arethen used to establish the distance
within the rows. This provides
accuracy between rows; although
moving long lengths of string is
cumbersome, and in windy conditions accuracy can be reduced as the string
blows away or bows in the direction of the wind.
CanesThe planting area can simply be marked out with rods or canes. This is the
easiest and fastest to set up but has the greatest room for error. The planting
distance between rows and
within rows can vary greatly.
One advantage of this
method is that it is ideal for
achieving an irregular
planting pattern. Conversely itis the worst method for
enabling future inter-row
cutting or mechanised weed
control.
Scoring spike mounted onto rear of quad.
Ground scored in both directions at 2.1 m spacing at Park Farm,
Ibstock. The chessboard pattern allows for subsequent management
in either direction.
-
8/8/2019 The National Forest Create a Farm Woodland
27/46
Types of hand planting
If you have decided to plant the trees yourself, you will need to use the correct
technique to ensure successful establishment. There are two types of hand
planting technique: notch planting and pit planting, as described in Box 4.
20
Box 4 I Types of hand planting
Notch plantingThe spade is used to cut a T- or L-shaped slit inthe ground, which is then rolled back and theroots of the tree are inserted. The tree is thenfirmed in.
Pit plantingA hole is dug in the ground, the tree insertedand the soil replaced and firmed in around it.This method is suitable for larger trees or rootsystems.
AdvantagesA fast process.
DisadvantagesAs this method is designed to be quick, thequality of planting can suffer. In particular, theplanting slit can be too small to accommodatethe roots, so do check.
AdvantagesBetter care of the roots. Ideal for smallerplantings or when tree planters areinexperienced.
DisadvantagesA much slower process.
Type of planting Advantages and disadvantages
The four main stages of notch planting
1. The spade is used to make a first slit
in the ground.
2. A second slit is made and levered back.
-
8/8/2019 The National Forest Create a Farm Woodland
28/46
21
General tips for planting
Whichever method is selected the following tips are important.
Planting The spade should be fully inserted into the ground and rolled backover the boot (steel toe-capped boots are advisable). This opens the cut and liftsthe soil out of the notch. When the tree is inserted particular attention should be
paid to the roots. It is important to ensure that the tree is planted at the correctdepth: the soil level should be flush with the root collar, i.e. the point on the tree
where the root changes into the shoot.
To find the root collar, rub the tree stem near the root; the root collar isthe point where the colour changes.
Soil After planting, the soil should be firmed back down with the boot heel toensure that no air gaps are left.
Roots The roots should be completely covered by soil to avoid damage to the tree.
Ash and sweet chestnut trees tend to have larger root systems and canbe poorly planted. If you can see the root or if too much of the root collaris exposed, then the planting is poor. Also check other species to monitor
quality. Walnut has unusually large root systems so it is important todouble check that they are planted well.
Alignment The trees should be vertical; if they are leaning over when plantedthey will continue to grow at an angle, resulting in poor form and shape, and mayeventually fall over.
3. The tree is placed at the slit apex and
positioned at the correct depth with the
soil level flush with the root collar.
4. The soil is gently firmed in while
holding the tree straight.
-
8/8/2019 The National Forest Create a Farm Woodland
29/46
22
Spade
This is a normal garden spade,better suited to pit planting.
Pole or dibble
As its name suggests, this isjust a long straight pole usedwhen planting willows andpoplar.
Planting spade
This is a much narrower spadefavoured by the planting gangs.It is much lighter and fasterand designed to be just theright size for notch plantingsmall bare rooted trees.
Figure 1 I Useful planting tools.
Tools
Figure 1 shows a selection of useful planting tools and explains their suitabilityfor hand planting.
-
8/8/2019 The National Forest Create a Farm Woodland
30/46
Protection
23
Trees need to be protected from two main threats: weeds and pests.
Weed protection
Weed protection is an essential part of tree care. It is important that this is
carried out immediately after planting and again each year after that (for about
35 years) in order to reduce competition for water and nutrients from weeds
and grasses. The timing will vary depending on the method. There are three
possible methods: mulching, mechanical and chemical; these are described inBox 5. On all but the smallest sites chemical weeding is likely to be the most
economic technique. Mechanical or mulching techniques may be preferred on
organic registered sites and may provide less risk to wildlife.
A clear, weed-free circle following spot application
of herbicide at Seale Lodge, Overseal.
When to weed
Mulches should be applied straight after planting and should be inspected
regularly and reapplied as necessary.
-
8/8/2019 The National Forest Create a Farm Woodland
31/46
24
Box 5 I Weed protection methods
MulchesMulching smothers weeds or prevents themfrom germinating. There are two main types ofmulch: natural such as wood or bark chips orman-made such as polythene mats.
Mechanical weedingMechanical weeding is the cutting of vegetation,usually with mowers and strimmers.
Chemical weedingThe guidelines for chemical weeding areconstantly being updated. You arerecommended to refer to up to date sources ofadvice and always check the label on thecontainer to ensure that it is suitable for yoursituation. You can contract out the work; thecontractors then become responsible forensuring that the correct mix and type ofchemicals and rate of application are used.
A wide range of chemicals are currently
available. Broadly speaking these forestherbicides fall into two categories: pre-emergent(also known as residuals) and emergent (mostlyfoliar acting).
Pre-emergent (residuals)Pre-emergent herbicides can be applied prior toplanting or immediately afterwards as thechemical goes into the soil and is then absorbedby the roots. Examples include products basedaround chemicals such as pendimethalin andpropyzamide.
Emergent (mostly foliar acting)
Emergent herbicides must be applied after theweeds have had time to grow and establishthemselves. Examples include products basedaround chemicals such as glyphosphate,triclopyr and paraquat.
AdvantagesCan make chemical treatment unnecessary somay be appropriate on sensitive sites. Can beinstalled by volunteers without specialist trainingor certificates.
DisadvantagesOrganic mulches must be rotted down. Mats
must be fitted and fixed correctly. Loosemulches may require an occasional top-up (orherbicide spray). Expensive and mats can beprone to pest infestation (voles and mice buildtheir nests underneath).
AdvantagesRequires no special skills. Easy to see wherethe work has been carried out and can bephysically rewarding.
DisadvantagesNeeds to be repeated several times a year to betruly effective. Easy to get too close to the treesand damage them (particularly when usingstrimmers).AdvantagesRelatively cheap. Very effective if appliedproperly and at the correct time.
DisadvantagesRequires knowledge and training in theuse of sprays and their application. Most treesrequire protection from sprays. Can damagetrees and the wider environment if usedincorrectly.
Type of weed protection Advantages and disadvantages
-
8/8/2019 The National Forest Create a Farm Woodland
32/46
25
Chemical weeding should be undertaken immediately after planting and then
again in the spring of each subsequent year for at least 3 years. The time of year
varies with the substance being applied. Februaryearly April can be an ideal time
to spray while weeds (such as grasses) are just emerging. It may be necessary to
use at least two applications within a planting season. Should this be the case
then foliar acting herbicides could be applied from August to September and/or
residuals in DecemberJanuary. As a general rule a minimum area of 1.2 m
diameter around each tree should be kept weed free from AprilSeptember, for35 years after planting, or until trees are well established.
Failure to control weeds in the early years will significantly restrict tree
growth for many years to follow. The presence of weeds also makes the
trees more vulnerable to other damage as it is simply harder to see and
control pests such as voles and rabbits.
As with planting it is possible to hire professional contractors to carry out this work.
For help with invasive weeds, such as ragwort, specialist advice should be sought.
Mechanical spraying of rows with herbicide at Buildings Farm Woods, Hartshorne.
-
8/8/2019 The National Forest Create a Farm Woodland
33/46
Protection against animal damage
New trees are very attractive to animals looking for
young growth to browse. They need protection against
common mammals, including deer, rabbits, hares and
voles, and against stock such as sheep. The four main
methods of protection are
fencing, tree shelters,
grass cutting and raptorposts, as described in Box
6. Individual tree shelters
are needed on a number
of sites. They are very
useful but it is essential
to install them correctly
see Figure 2.
26
Shelter
Used to protect the plant frompest attack and enhancesgrowth by acting as agreenhouse. There is a widerange of products (spirals,sleeves, shelters, mesh guards)so check that the selection iscorrect for each species andthat it provides sufficientprotection.
Mell
Used for knocking in thestakes to the required depth.
Stake
If tree shelters are requiredthen a firm stake or cane isneeded to ensure that theshelter stays in place. Stakesshould be driven at least 20 cminto the ground, but this doesvary with the type of shelterand stake being used. If tubesare used, the stake should beinserted so that it is just belowthe level of the shelter(otherwise the tree rubsagainst the stake and can bedamaged).
Figure 2 I Tree protection and tools.
Clear evidence of vole
damage: removal of the bark
and underlying growth layers
at the base of this poplar tree.
Raptor post a cost-
effective and natural
method for pest control
in establishing woodland.
-
8/8/2019 The National Forest Create a Farm Woodland
34/46
27
Box 6 I Main ways of protecting against animal damage
FencingIt may be necessary to erect some form offencing around the woodland to keep out stocksuch as sheep.
Individual tree protectionDifferent types of individual tree protection areavailable, from spiral guards, sleeves, wraps todouble skinned tubes. All provide a physicalbarrier to prevent mammal damage andenhance growth through a greenhouse effect.Individual protection methods have the addedbonus of clearly marking tree locations, offering
a barrier against pests and giving a degree ofprotection to the trees when spraying weeds orcutting unwanted vegetation.
Grass cuttingThis is important in areas of high volepopulations. Voles can enter through rabbitfencing and under tree shelters. By keeping thegrass short between the rows they are deprivedof cover and more easily seen by predatorssuch as kestrels and owls.
Raptor postsEncourages birds of prey into the woodland asthey can perch on the posts and use them asplatforms from which to hunt.
AdvantagesFor larger sites this is significantlycheaper than fitting individual tree guards. Lessobtrusive in the landscape. No broken guards torefit or tidy up when no longer needed. Helps tochannel public access.
Disadvantages
Once breached the woodland is vulnerable.Fencing does not protect trees againstvole damage. Trees can be hard to find ifcompeting vegetation is not kept under control.
AdvantagesOffer greater protection to individual trees.Easier to find young trees. Weed control easierif installed correctly (no other vegetation inside).
DisadvantagesHigh initial cost. Too many tubes can give agraveyard appearance. Pests can make nestsin tubes. High maintenance cost: ongoing
adjustment/removal of damaged guards andstakes. Some protection degrades too slowlywhich can strangle and kill the trees.Long-term costs of removal/disposal haveto be considered.
AdvantagesHelps pest control. Can make site look neater,although not necessarily better.
DisadvantagesPlan timing carefully to minimise disruption toground-nesting birds. Cutting can increasecompetition for nutrients and make the sitemore exposed, thereby slowing treeestablishment.
AdvantagesNatural, effective, cheap and quick to install recommended.
Type of protection Advantages and disadvantages
Voles seem to particularly like ash trees so if the ash are showing
signs of vole damage then use this as an early indication that they are
present, pose a threat and need controlling.
-
8/8/2019 The National Forest Create a Farm Woodland
35/46
Several aspects are involved in the maintenance of a new woodland. The
following is a useful checklist.
Keeping the trees growing so they establish successfully
weeding around the trees
general grass control
control of competition
Replacing dead trees
Ongoing management
Keeping the trees growing
Weeding around the trees
It is critical that weeding is carried out at the
appropriate time (see page 23) otherwise the
weeds will out-compete the trees for available
nutrients and water before they becomeestablished. The single largest cause of dead
trees is the lack of adequate weed control.
Grass control
Controlling the grass by cutting makes
managing the woodland easier but does not
directly make the trees grow faster or
establish easier these aspects are more greatly influenced by proper weedingand general maintenance. Indeed, cutting vegetation can encourage it to grow
back more vigorously, thus increasing the competition for nutrients and water, and
slowing tree growth. However, there may be conditions, such as the need to
control areas of noxious weeds (although spraying is preferable on smaller
patches), to show paths, glades and open areas and to remove surplus vegetation
in order to make weeding easier, where some grass control is necessary. Some
woodland owners like to cut the grass to make the woodland look neater, but this
is largely a matter of personal preference. Two main methods can be used tocontrol grass: mowing and strimming.
Maintenance
28
Weed-free rows at Frankies, Alrewas. At this stage no
further herbicide control is necessary to ensure that
the trees become established, but ongoing shelter
maintenance will need to be considered.
-
8/8/2019 The National Forest Create a Farm Woodland
36/46
Mowing This is the most effective and
least likely to cause damage to the trees. It
is also a lot cheaper, faster and less labour
intensive than strimming. A number of
tractor-based flails and sit-on mowers are available.
Strimming This is labour intensive and frequently results in damage to the bark
at the base of the tree. However, strimming may be the only option if the treesare planted in a pattern that is inaccessible for a machine-based mower.
Here there is a need to consider the benefits of grassland and unplanted
ground for nature conservation; controlling only selected parts of the grassland
may be required. Farmland birds have declined seriously over the last 25 years
yet new woodland creates ideal habitat for many farmland birds such as skylark,
snipe, curlew, lapwings, partridge and pheasant. Each species has its own bird
nesting season (lapwings nest from April to mid August, snipe from mid May tomid July) but as a general rule mowing should be avoided between April to mid
August. When mowing wildlife friendly practices should be used such as setting
a high mower height, manoeuvring around nests and, wherever possible, leaving
areas unmown.
Control of competition
This includes weed and pest control (see pages 2329). It is vital to determine the
current level, and future levels, of pests. This will influence the type of protectionused (e.g. individual guards, fencing) and determine management practices.
The creation of The National Forest is resulting in the expansion of suitable deer
habitat within a wider context of increasing deer numbers. Without adequate
control of the population, serious damage is likely to be caused to woodlands,
crops and groundflora. Appropriate woodland design (including deer fencing,
deer lawns) needs to be considered when planning a new woodland. Culling
deer offers the potential for income (stalking, game products). Management isalso important to maintain the health of deer populations. The National Forest is
encouraging landowners to work through Deer Management Groups to ensure
wise and sustainable management.
29
Muntjac deer are a threat to woodland and its
associated groundflora. Deer numbers are increasing.
-
8/8/2019 The National Forest Create a Farm Woodland
37/46
30
As the woodland area expands and matures, so the grey squirrel will need
control. Grey squirrels can seriously damage trees and can compete with and
predate on native fauna, such as dormouse and woodland birds. Trapping or
shooting are ways of control, but neighbouring landowners will need to work
together in order to be truly effective.
Replacing dead trees
Tree numbers need to be counted in August to assess success rate and calculatenumbers required for restocking (beating-up). When replacing losses, it is best to
replant with the species that are establishing best while considering the overall
aim of the woodland. Any natural regeneration can be used to offset the number
of new trees planted.
Ongoing management
This involves regularly checking the site to monitor the progress of tree growth
and looking out for potential problems. The following brief checklist may behelpful.
Spring in a young woodland time to enjoy
and to plan ahead.
Weed infestation observed
and controlled
Growth rate of grass and other
competing vegetation monitored
Fences repaired if damaged
or collapsed
Tree guards repaired, replaced
or removed
Raptor posts in place
General site maintenance, such as
litter collection and checking signage
Mowing paths and glades
-
8/8/2019 The National Forest Create a Farm Woodland
38/46
Creating new woodland on farmland is both a challenge and an opportunity.
Some landowners look at their newly planted woodland and feel a sense of
disappointment the trees resemble little green twigs and their neighbours
wheat field looks so tidy. Yet, as the trees develop and the opportunities that
the woodland provides become more apparent, so these feelings change. Many
landowners comment on how they enjoy seeing the trees grow, the increase in
wildlife and how they find something different in their woodland every time they
go through it. The change from a twig to a recognisable tree is not, as manypeople think, a slow process. By the time that the trees are 5 years old they
can be 2 metres tall and the character of the woodland is emerging.
Successful woodland creation rests upon thorough planning, implementation
and maintenance. There is a lot of work involved. In particular the first 5 years
are the vital time for tree establishment and weed control all of which can
influence the future direction of the woodland. Experience shows that keeping
things simple, robust and sustainable results in greatest success. A considereddesign is paramount to avoid future conflicts, concerns and costs. Maintaining
woodland carefully, and carrying out operations at the right time, is imperative.
Not looking after woodland only serves to accumulate problems for the future,
so if there are any concerns, advice should be sought.
Like the trees, woodland-related opportunities can grow quickly. In The National
Forest, leisure and tourism are becoming increasingly popular and an attractive
source of income for many landowners. Markets for the timber are developing existing outlets are rejuvenating and new ones emerging. A woodlands first
timber supplies will be the lower grade materials, called thinnings, that will be
produced when the trees are 20 years old. This low-grade material can be
converted into products such as logs, charcoal, rustic furniture or woodchips for
equestrian purposes or woodfuel. The development of installations that need
wood as a fuel in order to provide heat and/or electricity is a real opportunity,
both within the Forest and on a wider, national scale.
Looking ahead
31
-
8/8/2019 The National Forest Create a Farm Woodland
39/46
There is, however, no standard formula for maximising the products that can be
taken from the wood. In the past, woodland owners have sought to sell timber
as a raw, unfinished commodity. This benefits the buyer, not the grower. In The
National Forest every encouragement will be given to landowners to think
differently, to add value and to maximise opportunities. So, a maxim should be:
think beyond the trees.
32
-
8/8/2019 The National Forest Create a Farm Woodland
40/46
Organisations
National Forest Company
Bath LaneMoiraSwadlincoteDerbyshire Tel: 01283 551211
DE12 6BD www.nationalforest.orgResponsible for creating, through working partnerships and with community
participation, a new 200 square mile multi-purpose forest for the nation in theheart of England. The National Forest Company offers advice, grants and supportfor projects that can help contribute towards the creation of the Forest.
Forestry Commission
Willingham Road
Market RasenLincolnshire Tel: 01673 842644LN8 3RQ www.forestry.gov.uk
Regional office for Forestry Commission advice, grants and forestry policy.
The Game Conservancy Trust
FordingbridgeHampshire Tel: 01425 652381
SP6 1EF www.gct.org.ukA charity that promotes for public benefit the conservation of game species,
conducts research and advances the education of the public in game biology andconservation. This is also the contact address for:
The British Deer Society Tel: 01425 655434www.bds.org.uk
Sources of further information and advice
33
-
8/8/2019 The National Forest Create a Farm Woodland
41/46
Forest Research
Alice Holt LodgeFarnhamSurrey Tel: 01420 22255GU10 4LH www.forestry.gov.uk/forest_research
Research, development and surveys relevant to the forest industry in Britain.
Information and advice via publications, webpages, consultancies and contracts.
Much of the research effort is directed at increasing the environmental and socialbenefits of trees, including biodiversity and recreation, and ensuring integratedland management.
Northmoor Trust
Little WittenhamAbingdonOxfordshire Tel: 01865 407792
OX14 4RA www.northmoortrust.co.ukA charity that promotes wildlife and countryside conservation. It offers specialist
expertise and advice regarding walnut for quality timber production.
Royal Forestry Society
102 High Street
TringHertfordshire Tel: 01442 822028
HP23 4AF www.rfs.org.ukThe UKs largest and cosmopolitan educational forestry charity, organising fieldtrips, study tours and publishing the Quarterly Journal of Forestryfor its 4,400members.
Small Woods Association
The CabinsMalehurst Estate
MinsterleyShropshire Tel: 01743 792644SY5 0EQ www.smallwoods.org.uk
Aims to advance education in the conservation of small woodlands. Offersinsurance advice and packages, open days and woodland events.
34
-
8/8/2019 The National Forest Create a Farm Woodland
42/46
Further reading and references
Forestry Commission publications and website
Ellis. J. and the SE England Conservancy Team (2003). So, you own awoodland? Getting to know your woodland and looking after it.
Forestry Commission, Cambridge.
Kerr, G. and Williams, H.V. (1999). Woodland creation: experiences from TheNational Forest. Forestry Commission Technical Paper 27. Forestry Commission,Edinburgh.
Morgan, J.L. (1999). Forest tree seedlings best practice in supply, treatmentand planting. Forestry Commission, Edinburgh.
Rodwell, J. and Patterson, G. (1994). Creating new native woodlands. Forestry
Commission Bulletin 112. HMSO, London. Reprinted 2001: Forestry Commission,Edinburgh.
Willoughby, I. and Clay, D. (1996). Herbicides for farm woodlands and shortrotation coppice. Field Book 14. HMSO, London.
Willoughby, I. and Clay, D. (1999). Herbicide update. Technical Paper 28. ForestryCommission, Edinburgh.
Willoughby, I. and Dewar, J. (1995). The use of herbicides in the forest. FieldBook 8. HMSO, London.
Many other useful publications are listed on the Forestry Commissions website:
www.forestry.gov.uk/publications. They can all be obtained from: ForestryCommission Publications, PO Box 25, Wetherby, West Yorkshire LS23 7EW.Tel: 0870 121 4180 [email protected], contact your local Forestry Commission office.
35
-
8/8/2019 The National Forest Create a Farm Woodland
43/46
Other publications
ADAS (2002). Creating native woodlands on farms. Defra, London.
Miles, A. (1999). Silva: the tree in Britain. Ebury Press, London.
Beautifully produced and photographed, this coffee table book will inspire andfascinate all woodland owners and users.
36
-
8/8/2019 The National Forest Create a Farm Woodland
44/46
Notes
37
-
8/8/2019 The National Forest Create a Farm Woodland
45/46
38
-
8/8/2019 The National Forest Create a Farm Woodland
46/46
Based upon the experiences of
landowners within The National Forest,
the toolkit:
considers the advantages of
farm woodland
describes what type of woodland
can be planted
highlights how to plant andmanage woodland
gives handy hints and compares
different techniques
points to other sources of information
fits in a jacket pocket so that it can
be used in the field.
Creating your own farm
woodland can be a
challenging and rewarding
experience. This toolkit
provides, in a concise and
practical style, information
that can be used by all
landowners who are
considering creating
new woods on farmland.