Connects easily to allengine cooling systems

Tests for leaks

Eliminates potentialairlock problems

Quickly refills in seconds

The Most EconomicalUnit to Evacuate, Test and Refill Engine Cooling Systems

ULTRAVIOLET SYSTEMS

The Vac-U-Fill is a proven engine tool thatremoves and refills coolant systems and performs a built-in leak test in less time than today’s conventional methods.

Connects easily to all engine cooling systems – Simply connect to radiator opening or reservoir tank. No need to cut heater hoses or disconnect upper radiator hoses.

Test for leaks – Confirms system integrity, reduces chance of refilling a leaky system.

Eliminates potential airlock problems – Refill coolingsystem using “Patented” vacuum technology.(Refills like OEM’s) Eliminates the need for burping and warm up.

Refills in seconds – Quickly refill from used or new coolant reservoir. Accurately pre-mix a 50/50 mixture of coolant in 3 gal. (11.3 L)holding reservoir.

Safely store used coolant in large12 gal. (45.4 L) holding reservoir.

No electrical or moving parts.Operates completely on shop air.

Easy to operate.

Ideal for use with coolant flush chemicals.

SpecificationsUnit

Height 50” (127 cm)Width 19” (48 cm)Length 20” (51 cm)Weight 49 lbs (22.3 kg)

Shop air requirements: 90 psi (6.26 ar) 4.2 cfm

Distributor:

UView Ultraviolet Systems Inc.1324 Blundell Road, Mississauga, Ont., Canada L4Y 1M5Tel: (905) 615-8620 • Fax: (905) 615-9745email: sales@uview.comwebsite: www.uview.com

A

B

C

D

A. Easy to follow operating instructions.

B. Only 2 valves for simple operation.

C. Large easy to read gauge.

D. Rugged components for shop environment.