The Making of the Claw Robot Coleen Cao Thitari Yirong Khoa Tran Antonio Hardin “The Claw” TEAM...
7
The Making of the Claw Robot Coleen Cao Thitari Yirong Khoa Tran Antonio Hardin “The Claw” TEAM TEAM A A
-
Upload
brycen-gildersleeve -
Category
Documents
-
view
215 -
download
1
Transcript of The Making of the Claw Robot Coleen Cao Thitari Yirong Khoa Tran Antonio Hardin “The Claw” TEAM...
The Making of theClaw Robot
Coleen CaoThitari Yirong
Khoa TranAntonio Hardin
“The Claw”
TEAM TEAM AA
Abilities and Functions Its function is to grab bottles,
books, cans, etc. However, the weight of an object limits the strength of the Claw Robot.
It can move by using the controller with or without the USB adaptor.
360 degree motion ( left and right)
Lift objects up and down by 180 degree.
3 Building Sections
Accessories 42 kep nuts 50 zip ties 18 bearing flat 8 square shafts 21 shaft collars 30 Br-I and Br-D 2 S12 screws 6 thin spacer 2 battery strap ( battery holder) 48 S2 screws 2 3-32 lock nuts
THETHE FINISHEDFINISHED clawclaw ROBOTROBOT
Have you seen the Have you seen the Giant Claw Giant Claw RobotRobot? ?
