The Lumberman's Exchange brought to you by LBXonline.com

(800) 548-6914 www.logtolumber.comwww.logtolumber.comYour Log To Lumber Leader Since 1988 (800) 548-6914 www.logtolumber.comwww.logtolumber.com

a Productive,

Maintenance

or That All-Too-Familiar

notched stringers per hour. It can with its removable chamfer attachment.

Baker (single-head) with its modest

400-stringers-per-hour production rate and

you invest in,

Bak-

(800) 548-6914 www.logtolumber.comwww.logtolumber.com

a Productive, Low-

Maintenance

or That All-Too-Familiar Toolbox?ToolboxToolbox

Baker Notcher is just right for your pallet mill, be-cause you have a choice of three top-notch mod-els. One of them will ! t your production perfectly.

Choosing the right notcher is important, because you don’t want to invest in something that will end up falling short of your production requirements.

Choose the new and improved Double Notcher for the highestover 4,000 stringers per hoursituations, you should choose the Baker Single Notcher,

rated at about 750 notched stringers per hour. It can chamfer too with its removable chamfer attachment.

Lastly, check out the compact, economical Baker Bantam Notcher (single-head) with its modest


Whichever Baker Notcher you invest in,

to ! x another breakdown! Contact Bak-er ProductsBaker Double Notcher!

Your Log To Lumber Leader Since 1988 (800) 548-6914 www.logtolumber.com

Baker Double Notcher(original design pictured)

Baker Single Notcher

Baker Bantam Notcher

Baker Double NotcherBaker Double NotcherBaker Double Notcher(original design pictured)(original design pictured)

IMPROVED DESIGN Being Introduced At Expo Richmond, May 18th & 19th, 2012!

IMPROVED DESIGN Being Introduced At Expo Richmond, May 18th & 19th, 2012!

els. One of them will ! t your production perfectly. Choosing the right notcher is important, because

Lastly, check out the compact, economical Bantam Notcher


er Productser Productser Productser Productser Products

www.logtolumber.com

DEALS OF THE MONTH

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

May 2012

With your smart phone: Scan QR Code to visit—

'99 CAT 517 GRAPPLE DOZER

Clean! Working today!Item ID: 12463Contact: TomPh: 800-315-9950 x604

MOTIVATED SELLER!Item ID: 12519Contact: Daren/MichellePh: 800-315-9950 x603

'88 MORBARK 27 RXL WHOLE TREE CHIPPER

See us outside at Booths N-4

& N-5

For Classifieds Call Your LBX REP at 1-800-315-9950 May 2012 3

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

The New L-M �“I-CUT�” Bundle cross cut system!* 60�’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32�”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

LOG MATE 500, THE USER FRIENDLY CONTROL SYSTEMREADY TO MEET THE FUTURE OF LOGGING

HEADS ABOVE THE COMPETITION

www.logmax.com

Western Canada 1.800.666.4474 - Eastern Canada 506.869.2325 - U.S.A. 360.699.7300

TAKE CONTROL!

The requirements of the forest industry are constantly increasing. To meet the required production levels and reports a solid control system is a must-have. The all new Log Mate 500 brings you the future of logging at your fingertips. Built out of rugged and solid hardware in combination with an easy to use interface, this system will give you the best conditions for success!


FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comARDCO

1992 Ardco Swamp Trencher - Model H-150. SN:1522. Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%. This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner. FOB: GA. - Item ID-12312 - Tom 800-315-9950 x604

BANDIT2004 Bandit 2400 Track Chipper - Cat Engine, 710 Actual Hours!!! This Machine is not even Broken in yet!!! - Item ID-12518 - Michelle 800-315-9950 x6032010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID-12501 - Tom 800-315-9950 x604

BARKO1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041998 Barko 160D Loader - s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included - Item ID-12207 - Daren 800-315-9950 x6032004 Barko 375A Loader on Rough Terrain Carrier -

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2011 by Woods Publishing.

** Auctions **TEITSWORTH — Page 9www.teitsworth.com

SAWMILL CONSOLIDATION AUCTION Satur

Sherburne, New York

Page 10www.murphyauction.comPENINSULA PLYWOOD GROUP

ThursPort Angeles, Washington

age 11hilcocanada.com; maynards.com; hilcoind.com

ST. MARY'S PAPER CORP.—WORLD CLASS PAPER MILL

Major 2-Day Website & On-site Auction in Ontario, Canada

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** CALENDAR **EXPO RICHMOND 2012Coming May 18–19, 2012 Richmond, Virginia

** INFO LINK **Amark ..........................................7American Leasing & Financial ..7B & B Mfg. .................................26B. H. Payne ................................13Baker .......................................1, 6Bandit Industries .....................12Bartlett Saw Service ................39Bay Equipment .........................37Brewer Eagle .............................27Buck Equipment (AIM) ...........17Concept Products ....................28Cord Master ..............................20Corley Mfg .................................33CRD Metalworks .......................24CW Mill—Hogzilla ....................32Dyna Products ..........................18Expo Richmond ........................38Hilco Industries .....................11Jackson Lumber Harvester .....15James G. Murphy ..................10Kasco-SharpTech .......................9 Lignomat ...................................21Litco ...........................................13LM Equipment, Canada .............3

LogMax ........................................4M&F Gauge ................................17Machinery Sales Co., Inc. ..........8Metal Detectors, Inc. ...............29Midwest Sharpening Service ..19Multitek .....................................16P&D Johnson ..............................7Phase-A-Matic ...........................21Piper’s Saw Shop ......................30Resource Recovery ..................35Richmond EXPO ....................38Rotochopper ............................40Row Electric..............................25Sawmill Exchange ....................31Select Sawmill ...........................14Sering Sawmill ..........................19Sharp Tools ...............................34Southeastern Metals ................14Suffolk Machinery ......................2Teitsworth Auctioneers ..........9Thomas Tire, Commercial ......29US Blades ..................................36Weaver Electric ........................22Wood-Mizer ...............................23

The Richmond ShowEXPO RICHMOND 2012Richmond Raceway Complex * Richmond, Virginia

Friday May 18 and Saturday May 19, 20129:00a.m. until 5:00p.m.

The 33rd East Coast Sawmill and Logging Equipment Exposition

There is no charge to attend theexposition if you pre-register; there will be a $10.00 chargefor those who register on-site.

EXPO RICHMOND 2012Co-sponsored by Virginia Polytechnic Institute& State University Cooperative Extension and

Virginia Forest Products Association

Return by April 9, 2012 to: EXPO RICHMOND 2012 P. O. Box 160 Sandston, VA 23150-0160

Your Name: Nickname:

Company: Title:

Address:

City: State: ZIP:

Telephone: FAX:

E-mail: Country (if not USA):

PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one)G Sawmilling G Logging G Pallet Production/Recycling G Dealer Sales G Paper/Pulp

G Equipment Manufacturer G Plywood/Panel G Other (Please Specify) :Pre-registration allows entrance to the Exposition (May 18 - 19, 2012, 9am-5pm) at no charge. On-site registration is $10.00.

Exhibitors: Please do not use this form. Contact show office for exhibitor registration information.Additional information is available on the Internet at www.exporichmond.com

See page 38

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Original L

umbe

rman

’s E

xcha

nge

Ple

ase

Add

Ple

ase

Chan

ge

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

6 The Original Lumberman’s Exchange Visit us online at www.LBXonline.com!

EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

The Most

Popular Band

Resaw in the

World!

The Model “A” Baker Band Resaw:One of the All-Time Greats!

[email protected]: (800) 548-6914www.logtolumber.com

DEALS OF MONTH FROM

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

With your smart phone: Scan QR Code to visit—

'09 DYNAMIC 585 WHOLE TREE CHIPPER

Incredible Price! New! Must Sell!Item ID: 12400Contact: TomPh: 800-315-9950 x604

Item ID: 12488Contact: DarenPh: 800-315-9950 x603

'98 650G FULL FORESTRY PACKAGE

Mounted on rough terrain carrier. 40’ boom, hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours. Rotobec continuous grapple. Very nice machine. - Item ID-12380 - Tom 800-315-9950 x604

2004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x6042006 Barko 595 CRL Loader - 40’ Live Heel for high stacking. 8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready! Good condition. - Item ID-12405 - Tom 800-315-9950 x6042010 Barko 295ML Magnum

with CSI 4400 Slasher - Very seldom does a loader like this come to the used machine market place. Less than 900 hours. Barko Magnum Series with CSI DM4400 Sawbuck. 32’ reach. Cummins 173HP engine. 4642 Rotobec Grapple. Mounted on a Pitts 39’ Trailer. Save thousands over new! - Item ID-12352 - Tom 800-315-9950 x604Barko Knuckleboom - 2006, Model 495 Trailer Mounted, 3800 Hours, FEC Log Pro Buck Saw Included . Like new one owner machine! - Item ID-12153 - Chris 800-315-9950 x600

BELL1995 Bell Super T - Dangle Head bar Saw. 28L Tires at 60%. Engine has issues and does not run. All components are there. Parts machine, or one to fix up and use. Priced cheap! Serial Number BCH3660 - Item ID-12470 - Tom 800-315-9950 x6041999 BELL TF120B Feller Bunchers - one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price : 60,000.00 USD - Item ID-11480 - Daren 800-315-9950 x603

CASE2007 Case 1150K Dozer - 2565 Hours on very strong dozer. Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID-12348 - Tom 800-315-9950 x604

CATERPILLAR1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!

Now AcceptingVisa & Mastercard

FINANCE YOUR EQUIPMENT PURCHASE TODAYNo Down Payment on Most TransactionsApplication Only up to $100,000Programs in “All Fifty States”Loans and Leases AvailableSame Day Approvals—Next Day Funding

(800) 644-1182(503) 679-7370 Cell

Email: [email protected]: www.americanlf.com

Jake HebenstreitFinance Consultant

Morbark Model P-S Post PeelerGood Condition, S/N #368; As is: $9200,

F.O.B. Lewiston, Idaho

(208) 743-5501is Ready to work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031983 Caterpillar 988B Loader with very low hours - Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 - Daren 800-315-9950 x6031987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950

x6042000 Cat 550 Harvester w/Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-

12349 - Tom 800-315-9950 x6042006 Cat M318 MH - Totally refurbished with 30 day warranty. Gone through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Baltimore - Item ID-12520 - Tom 800-315-9950 x604

2007 Cat 325D w 624 Waratah Processing Head - 7800 hours. Very clean machine. Head updated. Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 - Tom 800-315-9950 x604Caterpillar D4H Dozer 1903 Hours - THIS WAS SOLD!! NO LONGER AVAILABLE. 1993, Cat Model D4H XL, S/N 8J00374,


Globe Strip SawKimwood Short Block RipsawMereen-Johnson 48” RipsawPaul Gang RipsawRaimann/Weinig KR450MRipsaw SystemSalem Late Model Combination Edger

FILING ROOM EQUIPMENTArmstrong 3-10C Stretcher RollArmstrong Dual Side GrinderArmstrong No. 4 B.S. Stretcher RollArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleArmstrong No. 90 Equalizer Gockel 163” Mag Bed GrinderHanchett 84” Challenger GrinderHanchett DN-40 Knife GrinderHanchett Knife Grinders (10)Hanchett VR120 Mag Bed Newman G-200 GrindersVollmer Cana E (8)Vollmer CH210 Auto Sharpeners (2) Weinig R 934 Profile Grinder Wright Mod. 1801 (3) Wright W-1600 Auto Tipper

HOGS & PULVERIZERSGruendler 50XE Hammer HogJacobson Hammer Mill Jeffrey 36 x 60 ShredderJeffrey 76WBH Horiz. HogWest Salem 38” HorizontalWest Salem Big Brute GrinderWilliams 30KS Hammer Hog

MISCELLANEOUS5-Arm Hyd. Tilt Hoist 10’ Hydraulic Lumber StackerCEMCO Combination Planer/Sander Fruilmac End MatcherHurricane 28” Chop Saw Industrial 3496 Finger JointerIndustrial FJS-25 Finger J. System

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

New & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSKockums 6’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air StrainMebor Horizontal BandmillSalem 6’ Air Strain BandmillSalem 5’ Air Strain Bandmill

CARRIAGES & DRIVESCorley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear Carriage Salem 42” 4-Block CarriageSalem 60” 4-Block CarriageSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive USNR 2000, 42" Stud Carriage

CHIPPERS & SCREENSArasmith Lilly Pad ChipperBM&M 5’X14’ Screen BM&M Chip ClassifierCM&E 36” Rechipper Kockums 66” Horiz. Feed Precision 8x8 ScreenPrecision 38” Horizontal FeedPrecision 48” 8-Knife Drop F.Precision 48” Horizontal F.Precision 58” Horizontal FeedPrecision 66" Horizontal F.Precision 96” Whole LogPrecision 118” HFBD ChipperRotex 6’X16’ ScreenWest Salem 58” Horizontal Feed

DEBARKERSNicholson 22” A-5 Debarker

EDGERS, GANGS & RIPSAWSGlobe Panel Ripsaw

Irvington 20’ Trimmer, 1’ Saws L&M Log Cut-Off SawsLumber Stackers (2) Peerless 24-Unit Bins (2)Producto Dog Ear Machine Tektronix Log Metal Detector Timesaver Sanders (6)

PALLET EQUIPMENTBronco 2006 Pallet NailerPallet Repair Systems NailerSmetco Pallet Turner

PLANERS & MOULDERSBuss 55 Double SurfacerBuss 88 Double Surfacer CEMCO Planer/Sanders (2)Coastal 16-Knife 9” Planer Pkg. Coastal 24” 20-knife PlanerDiehl 6-head TF MoulderMattison 226 12” MoulderMattison 228 16” MoulderNewman 382 Double SurfacerNewman M712 12-Knife Northfield Double SurfacerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersS-R 6-10-A1 10-KnifeStetson-Ross Timber SizerWadkin 6-Head MoulderWeining 22A 5-HeadWeinig 22B Complete Line Weinig U22A, 6-head Weiniig P22N 5-HeadYates-A-63 16-Knife Planer Pkg.

RESAWS36” Tri-State Tilting ResawKockums 6’ Horiz. Twin Air StrainMcDonough 54” Twin HorizontalSalem 5’ Air Strain HorizontalSalem 6’ Horiz. Air Strain Smith Twin Horizontal ResawTurner 52” Rollfeed Resaw


LOK-N-LOGSSAWMILL CONSOLIDATION AUCTION

NOTICEJim Webb, company owner, to better utilize labor and space decided to Consolidate 2 Operations into 1.Much of this equipment was purchased new and has low hours of running time.Below is a "brief list" of items to be sold.

www.teitsworth.com

SAWMILL EQUIPMENTHMC MM10 sawmill 4 block, 60hp electric in feed, out feed, turner, 50” bladesIR 25hp compressor- Like newYates American 820-12 planer(2) break down hoistsGolden Eagle 3 band sawMorebark 414 post peelerRoto Chopper Mulch maker horizontal grinder E200 w/300hp electric power24x80 Radial stacking conveyor26x40’ and 26 by 20’ paddle chain conveyorsStump GrinderEdgerSeveral roll cases, 3&4 strand log decks, log turners, conveyors, barn cleaners and more.

TRUCK SHOP & ROLLING STOCKMohawk 25,000 lb truck liftPortable welderPallet Racking- cantilever rackingDust tower & Air handling systemShop tools & equipmentDorsey walking floor trailerCaterpillar 924G loader w/bucket & forksCaterpillar 267 track skid steer loader w/bucket & forksGrove 60’ manlift2004 Mack Log truck & trailerMuch more…

OWNERLOK–N–LOGS

TERMSFull payment auction day, cash, check, MC/Visa. 2% buyer’s fee waived for payment with cash or check. 10% buyer’s fee for items under $1,000.

Roy Teitsworth, Inc.AUCTIONEERS

(585) 243-1563

1903 Hours, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition! - Item ID-12177 - Chris 800-315-9950 x600Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603

225 LC Caterpillar 225LC Shear Excavator - 4226 hours, Undecarriage is in GOOD Condition, Machine is WOODS ready. - Item ID-12517 - Michelle 800-315-9950 x603

330’S2003 CAT 330 Log Loader -

13,750 hrs. new u/c less rolls nice tight and clean log loader. Located near Portland OR; 38’ Live Heel boom; Forestry package on cab. 40” cab riser with tilt for transport. AC/Heat work good. Very nice yard machine. - Item ID-12478 - Tom 800-315-9950 x604

517GR 1999 Cat 517 Grapple Dozer - Fully enclosed cab with heat and air. 90% undercarriage with new sprockets, chains, rails, and rollers. Only needs pads or grousers. 8485 hours. Esco grapple is dry and tight. Owner just had engine rebuilt with new head, new rings, new bearings, new oil pump, new gaskets, new fly wheel ring gear,. Very nice running machine. AC just repaired. - Item ID-12463 - Tom 800-315-

9950 x604518

Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603

518C

1995 Caterpillar 518C Grapple Skidder - This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the


PUBLIC AUCTION

MurphyLIVE!

murphyauction.com


‘93 Timberjack 450C Dual Arch Grapple Skidder w/WinchItem ID: 12510Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘76 JD 440B SkidderItem ID: 12494Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-315-9950 x603Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition. Grapple or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 - Tom 800-315-9950 x604

SHOW ALL 525’S1998 CAT 525 Grapple Skidder -

9600 hours on well maintained machine. 34 x 25” Tires at 50%. Single Arch Esco Grapple and Winch all work well. Center section tight. Cat engine runs well. - Item ID-12429 - Tom 800-315-9950 x604

5252001 Cat 525 Dual Arch Grapple Skidder - 5651 hours, Tires are 50%, center pins are tight. Machine is WOODS ready. - Item ID-12508 - Michelle 800-315-9950 x603

525B 2003 Cat 525B S/A Skidder - Good condition. 10,500 hours. New Transmission. Recent work done. Runs well. CA - Item ID-12189 - Tom 800-315-9950 x6042004 CAT 525B Grapple Skidder PRICED TO SELL FAST!!!! - 8,538 hours, Caterpillar 3126 Engine, Powershift transmission, 30.5L-32 Tires (3 Poor, 1 Like New), More photos available, Machine is in southeast - Item ID-12424 - Daren 800-315-9950 x603

CBI

1999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042009 CBI Model 6400T Grinder - CBI Grinder Model Magnum

Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x604

CHIPPERS2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins,


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw

B.H. Payne & Company, Inc.P.O. Box 90608

404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

Timberjack 450B Single Arch Grapple Skidderw/Winch

Item ID: 12511Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

‘10 Bandit 2400 Tracked Disc ChipperPaper Quality Chips!!Item ID: 12501Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x60448” Precision Chip Pack - 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 - Daren 800-315-9950 x60348” Precision Chip pack - Currently being refurbished and will have new knives, new holders, new bearings, new paint, and a 30 day warranty. This machine will be ready to work!!! Before and after photo - Item ID-12484 - Daren 800-315-9950 x603Precision 58” Chip Pack - Completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603Precision 58” Chipper - Complete rebuilt with Factory Warranty. - Item ID-12232 - Daren 800-315-9950 x603

CLARK1976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well. Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can

haul on 10 ton trailer. - Item ID-12249 - Tom 800-315-9950 x6041978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x6041989 Clark 666 Dual arch grapple skidder - The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x603Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder that you would like to sell, please call to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x604

COMPLETE SAWMILLSCircle Sawmill - Includes Mellot conveyor, Carthage carriage, Helle setworks, Helle log turner, hydraulic power pack 25-hp, 100hp electric motor, 25hp electric motor and all starters. - Item ID-11992 - Michelle 800-315-9950 x603Frick Automatic Sawmill - 3


TOP NAME Brand You Know13’2” x 1.25” x 042

$1375 Carbon Wood Cutting

Lenox WoodMaster C13’2” x 1.25” x 042


Simonds Red Streak13’2” x 1.25” x 042


INCLUDES

SHIPPING!!!

Full Box of 30

INCLUDES

SHIPPING!!!

Full Box of 30

Call for more info on pricing and quantities

of all our blades.

Call and see why we are the FASTEST GROWING

bandsaw steel company in the USA.

INCLUDES

SHIPPING!!!

Full Box of 30

678-621-3732www.semetals.net

NATIONWIDE SHIPPING

Shipping prices based on a $35 per box UPS charge. Depending on where you are in the country, your price could be EVEN LESS!

AND ANOTHER TOP BRAND!!Call or check our website to see the “Mystery Brand”

Calltoday

‘88 Timberjack 450B Dual Arch Grapple Skidderw/Winch

Item ID: 12512Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2004 Tigercat 724D Feller BuncherWill have 30.5 tires; Low hours!Item ID: 12496Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Chris 800-315-9950 x600Meadows #2 Sawmill - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic

setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-

315-9950 x603CSI

2004 72” CSI R72 Circle Saw - hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Michelle 800-315-9950 x603

DAEWOO2002 Daewoo 290LL Log Loader - Located in MI. Daewoo 290LL, Pierce Pacific Log Loader Package, Elevated Cab, High Walker, Forestry Protected Cab and all logging guarded, Pierce Boom, Dry Chemical Fire Suppression System, Good Undercarriage, Butt n Top grapple. 2002 Year model, 19000 hours, but well maintained, updated, and upgraded. Runs very well. Man engine package lasts 40,000 hours. FOB: MI - Item ID-12480 - Tom 800-315-9950 x604

DEERE1996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade;

JD 6076 Engine. Very well maintained. Runs strong. Excellent price. - Item ID-12313 - Tom 800-315-9950 x6041998 650g Full Forestry Package - 3000 hours, works excellent 2010 complete under carriage new chains pads and sprockets winch and machine works excellent all pins and bushing all tight replaced main blade bushing replaced all blade cylinders Janurary 2011 Selling because no longer needed for my operation. - Item ID-12488 - Daren 800-315-9950 x6031998 JD TC54H w/Logging Forks - Very well maintained machine. 13,000 hours. Maintained by John Deere. Machine used for personal only. Never on saw mill. Tires are 28L x 26 at 85%. Runs good. - Item ID-12467 - Tom 800-315-9950 x6042000 JD 1270 Harvester - 1270C; s/n 01GE0004; Year 2000; Hours unknown...estimated 7500; Cummins 218 HP Engine; Hydrostatic Transmission; Tires and wheels 700MM; John Deere 762C Processing Head; Boom


”Jackson has been around long enough so they’ve figured out

what works and what doesn’t.”

“Jackson Wood Shaving Mills simply last longer. They’re rugged and dependable.”

“In volume tests on production, the Jackson Wood Shaving Mill

was tops—and in day-in, day-out production, it’s still tops!”

“Our Jackson Shaving Mill was built in 1966 and is still going strong!”

“As our business has expanded, we’ve come back to Jackson for Shaving Mills again and again.”

“We like the low maintenance and availability of manufactured parts for our Jackson equipment.”

WHAT OUR CUSTOMERS ARE SAYING—

Questions about Shaving Mills

has 50 years of answers!plus

Several Models to choose from producing 7.4 Cubic Yards (5.7 Cubic Meters) to 50 Cubic Yards (38.2 Cubic Meters)

Utilize low-grade Logs & Slabs Produce high-quality, fluffy shavings Powered by Electric, Diesel or Tractor PTO Complete wood shavings plant layout services available

Shavings Drying Systems

Wood Shaving Mill

— Shaving Mills Webb Solid-fuel Burners “Premier” Scragg Mills Stationary Sawmill Carriages Feedworks, Decks, Turners Hydraulic, Electric and Electronic Setworks Vertical Edgers, Horizontal Edgers “Lumber Harvester” Portable Sawmills

SO OU E WO

E E U S P

830 N. State Road 37, Mondovi, Wisconsin 54755 USA

WE HAVEDRYERS

AVAILABLE OR

us at

#3


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

2001 Cat 525 Dual Arch Grapple SkidderItem ID: 12508Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2009 JD 843J Feller BuncherItem ID: 12490Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

28' 2"; Weight = 36,045 lbs.; Ground pressure 6.7 front 6.0 back; Overall Height 11’ 11" Length 23’6" Width 9’4". Very Motivated Seller. FOB: Alaska - Item ID-12477 - Tom 800-315-9950 x6042001 Timberjack/Deere 840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry. New Oil Cooler. Joy Stick Steering. 34” Tires at 70%. JD 22” Saw Head is tight and runs well. Very clean unit

and a great price. - Item ID-12410 - Tom 800-315-9950 x6042006 JD 310 Loader/Backhoe - 1762 Hours. Very nice condition. Extenda-Hoe. 4 wheel drive. Runs good. - Item ID-12464 - Tom 800-315-9950 x6042009 JD 437C Loader with Delimber - Super Clean unit with only 3119 hours. Complete with CSI 264 Delimber. Comfort Cab with AC/Heat/Stereo. Joystick

controls. JD 180HP engine. Kodiak Trailer. Very clean and runs well. - Item ID-12523 - Tom 800-315-9950 x604Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 - Chris 800-315-9950 x600

3352007 John Deere 335C Loader - 2000 hrs, comes with a NEW CTR Reversable Bucksaw. - Item ID-12234 - Daren 800-315-9950 x603

440B 1974 JD 440B Skidder - Very strong skidder. New center pin. New JD Clutch. New Turbo on engine. Pulls extremely well. 18” tires at 40%. - Item ID-12459 - Tom 800-315-9950 x6041976 JD 440B - MINT CONDITION. WON’T FIND ANY BETTER THAN THIS! just over 3000 hrs. Excellent condition; New u bolts on the center shaft ( less than 6 mo ago); New front hyd pump ( one year ago); Center pins are tight; Does not burn oil; Like new set of bear paw chains on the front; Tires in excellent

shape approx. 70 %; Not used for commercial logging, strickly firewood ( pulled tops); Never been repainted or redone, all original; Comes with complete spare tire and rim; Brand new 100ft of cable on winch line ( less than 2 mo ago); New seat; Clean operator station; Starts really well even when it is very cold. - Item ID-12494 - Tom 800-315-9950 x604

440C 1979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x604

540A 1977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x604

540B 1984 John Deere 540B Skidder - Super Clean. 23” tires almost


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

$14,907

BUILT TO LASTReal Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

Effective May 1, 2011

‘98 650G Full Forestry PackageItem ID: 12488Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1984 JD 640 Cable SkidderItem ID: 12499Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

new. Recent updates: Rebuilt Transmission; Rebuilt Winch; Rebuilt Rear End; Rebuilt Radiator. Working everyday in light hardwood application. Owner retiring but has maintained this skidder in immaculate condition. No leaks. Metal is straight. Cab is clean. Owner took great pride in how he took care of this unit. You need to see this to appreciate it. - Item ID-12479 - Tom 800-315-9950 x604

540G III 2006 JD 540GIII Cable Skidder - Only 1800 hours. Bought with 575 hours in 2009 and used sparingly in hardwood application. 23.1 Tirees at 80%. AM/FM Radio with Heater in cab. Removable glass for summer. Great condition. - Item ID-12411 - Tom 800-315-9950 x604

548D 1991 John Deere 548D Grapple Skidder - with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x603

SHOW ALL 640’S 1994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 - Tom 800-315-9950 x604

640D 1984 John Deere 640D Cable Skidder - NEW TRANSMISSION;

John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950 x604

643D1992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. - Item ID-12285 - Chris 800.315.9950 x6001992 John Deere 643 Shear Feller Buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostatic transmission. Strong John Deere 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Great brakes. No heat or a/c. Has a 20” shear head. - Item ID-12537 - Tom 800-315-9950 x604

SHOW ALL 648’S 2010 JD 648H Grapple Skidders - LOW HRs. - 2300 hours. Owner lost his job. 30.5 x 32 tires at 95%. Dual Arch Grapple. Save $80,000 off new. Super Clean! - Item ID-12473 - Tom 800-315-9950 x604

648G III


To find the nearest dealer call:

(888) 820-3962


Call Marvin Miller for a quote 231-924-5953 (fax) 231-924-6166 11606 Brickyard Rd. Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang Edger ScraggTrim Split Strob

…and just about any Custom Saws you

need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to

ship from major manufacturers, including…

WE ALSO OFFER THE FOLLOWING:

(360) [email protected]

www.SeringSawmillMachinery.com

Booth L6: Stop by our friends at Diehl-Clayton Equipment, Inc., to see us!

‘00 Timberjack 660 Dual Arch Grapple Skidder w/WinchItem ID: 12509Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1998 Model DM Mack Log TruckItem ID: 12493Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2002 John Deere 648GIII Dual Function Grapple Skidder - 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 - Daren 800-315-9950 x603

SHOW ALL 748’S 2010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID-12282 - Tom 800-315-9950 x6042011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x604

748G III 2006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-315-9950 x604

843H

2004 JD 843H Feller Buncher w/JD 22” Hot Saw - Very clean machine. Model 843H; Year 2004; S/N WC843HX882337; Condition Good; Hours 3,267; Engine JD 6.8 liter; Tires 28L-26 14 ply 50%; Chains on front tires; Enclosed cab with heat and air; JD Hot saw head 22"; All functions work. No leaks. ONE OWNER. WELL MAINTAINED. - Item ID-12466 - Tom 800-315-9950 x6042009 John Deere 843J Feller Buncher - 1800 hours. Very clean machine in excellent condition. Customer lost job. 30.5 x 32 Tires at 90%. JD Hot Saw. Comfort Cab with Head/Air/Stereo. - Item ID-12490 - Tom 800-315-9950 x604

DRESSER1981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 -

Michelle 800-315-9950 x6031984 Dresser 520B - 1984 Dresser 520B, 4125 hours, 125 hp, 4x4, 3 speed transmission with reverser, 3rd hydraulic function, quick attach with 8’ bucket, lights and heater on 12 volts, tire size 17.5 tires are at 40% all around - Item ID-12485 - Daren 800-315-9950 x603

FIREWOOD PROCESSORSBest Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic

option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model. Standard features include a live deck, fold-able stacking conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up to


Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

www.cord-master.comEmail : [email protected]

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


2004 Hydro-Ax 570 Feller BuncherItem ID: 12316Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1998 JD TC54H w/Logging ForksGreat condition!Item ID: 12467Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2004 Bandit 2400 Track ChipperItem ID: 12518Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

‘78 Timberjack 380 Dual Arch Grapple Skidderw/WinchItem ID: 12513Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

two cords per hour at the centralized operator station. The 18GM is built with heavy-duty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior. - Item ID-12299 - Tom 800-315-9950 x604Portable Firewood Processor with Circle Saw - 48” Circle Saw, Powered by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. - Item ID-12435 - Michelle 800-315-9950 x603Shop Built Portable Firewood Processor w/48” circle saw - enclosed cab, 3 strand live deck, diesel powered, mounted on 5th wheel trailer, over had over 100k invested before he pasted away. Family is open to offers on this machine - Item ID-12507 - Daren 800-315-9950 x603

FORKLIFTS1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours. Priced to sell. Great for delivering products or working in warehouse with high reach. This is a bargain! - Item ID-12321 - Tom 800-315-9950 x6042004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4' Forks, Side shift, 4 Way steer, 12' Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604

FRANKLIN1977 Franklin 132XL Forwarder - Nice machine. Runs good. Tires at 50%. - Item ID-12528 - Tom 800-315-9950 x6042002 Franklin 185 Cable Skidder - Very clean machine with about 7800 hours. Cummins Power. One owner. Well maintained. Tires at 80%. - Item ID-12451 - Tom 800-315-9950 x6042003 Franklin 185 Cable Skidder - 7600 Hours; Very good condition; Cummins Power; Enclosed Cab with working heat and air; Tires at 80%. S/N18562 - Item ID-12447 - Tom 800-315-9950 x6042003 Franklin Q70 Grapple Skidder - 2003, Model Q70-M31A, Enclosed Cab W/Heat & A/C, 28Lx26 Tires 85% Rear, 70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x604Franklin Skidder - 2003, Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Chris 800-315-9950 x600Franklin Skidder Model 142 - Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603Franklin Skidder Model 170PT - Franklin Skidder Model 170PT, New tires, New cable, Hours 6585 - Item ID-12377 - Daren


VFD CONTROL

ALL SIZES OF MOTORS

MANUAL TRANSFER

SWITCH

MOTOR CONTROL STARTERS(Solid State)

DISCONNECTSWITCH

AUTOMATICREDUCED VOLTAGE

STARTER

COMBINATIONSTARTER

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BEST Price!

YOU NEED WEAVER ELECTRIC

CALL TODAY!Toll Free 800-257-0038

6591 N. Washington, Denver, CO 80229Web: www.weaverelec.com

2001 Quadco 22B Hot SawREBUILT! Like New! 360°Item ID: 12471Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1999 Timbco 820 ForwarderRuns well!!Item ID: 12454Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Caterpillar 225LC Shear Excavator Item ID: 12517Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

‘92 Morbark 6300 3-Wheeled Feller Buncher w/Hotsaw HeadItem ID: 12514Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

800-315-9950 x603SHOW ALL Q80C’S

2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800-315-9950 x604

GYRO TRAC2006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x604

HAYBUSTERHaybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1" screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be

used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Daren 800-315-9950 x603

HOOD1996 Hood 20000 Loader w/Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine. Slasher and delimber run good. 30’ boom. Overall good condition. - Item ID-12433 - Tom 800-315-9950 x604

HUSKY

1994 Husky 235XL Loader Package - Hour meter broken. OT Delimber Trailer; CTR 314 Cradle Delimber; Bar Slasher; Heat and AC work; Strong Loader; JD 160HP Engine. - Item ID-12445 - Tom 800-315-9950 x604

HYDRO-AX2004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800-315-9950 x6042005 Hydro Ax 670 with 22in Saw head - 7200hours, 22inch high capacity bunching head, New Cummins engine, 1 new firestone tire other 3 at 40%, Tires are 30.5 - Item ID-12481 - Daren 800-315-9950 x603

511EX 1996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x604

HYUNDAI1999 Hyundai 280 w/Denharco 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x604

LIEBHERR2007 Liebherr A924B Wheeled Log Loader - 10,100 hours. Very Good Condition. Liebherr

800.553.0182woodmizer.com

© Copyright 2012, Wood-Mizer Products, Inc.

Visit us on Facebook

FOR ALL BAND SAWMILLS

™

The most crucial component of a sawmill is the blade. When it comes to Wood-Mizer blades, blades sharpening equipment, and ReSharp™ service, you can expect quality, accuracy and a longer life.

Now, Three Ways to Make

Your Day More Profitable

WOODBINE FIREWOOD PROCESSORS

PERFORMANCE POWER PROFIT

50' slasher saw with 8-way wedge.Take on huge yields with a reasonable pricepoint.

$54,900

Smaller, but just as powerful.4 Cords/hr. up to 16" diameter wood.

$46,900

1

3

Let us show you the Woodbine way........$67,900

MADE IN USA


FAX TO: 800-248-4479 419-244-8887 419-248-4479

[email protected]

2000 Sterling Road Truck/TractorReduced! Owner must sell!Item ID: 12323Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2010 Valmet 860.4 Forwarder800 hours; Low Price!!Item ID: 12351Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1993 Morbark 6300 Feller Buncher on Tracks w/HotsawItem ID: 12515Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘95 Morbark Wolverine 3-Wheeledw/16” Shear HeadItem ID: 12516Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

makes the highest quality heavy equipment in the world. This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 - Tom 800-315-9950 x604

LOGGING EQUIPMENT1990 Volvo Grapple Truck - 1990 GMC Volvo WG64 tandem axle grapple crane truck. The GVW is 56000. Cummins diesel, horsepower 270. 9 speed manual transmission with spring suspension. No odometer only a hour meter. Hour meter reads 21965.

The crane model number is BAR803-C S/N 18615. It has a 20’ reach. Has a steel bed and has a front GAWR of 16,000 and a rear or 44,000 with floatation steers. It has good tires and runs good, - Item ID-12495 - Tom 800-315-9950 x6041995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 x6041997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran

replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x6031998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 - Tom 800-315-9950 x6041999 Mack Truck with Prentice 120 - Mack engine and transmission. Runs good. Strong Prentice 120E Loader. Very nice package. - Item ID-12448 - Tom 800-315-9950 x6042000 Peterbilt Sleeper Truck - Good running condition.

Priced to sell. - Item ID-12492 - Tom 800-315-9950 x6042000 Peterbuilt Logging Truck - N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 - Michelle 800-315-9950 x6032000 Sterling Road Truck/Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x6042001 MCB 621REG Trommel Screen with Radial fines conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote. It has just over 8,200 hours, has had the drum replaced, has new rollers, and a new


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

1994 CAT 518C Grapple SkidderItem ID: 12302Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2010 Prentice 2670 w/Bunching HeadItem ID: 12452Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

1999 Mack Truck w/Prentice 120ItemID: 12448Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2005 Prentice 384 w/Saw HookupsItem ID: 12396Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2000 CAT 962G Wheel LoaderItem ID: 12407Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

belt and it was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed. The machine runs great and is ready to go to work - Item ID-12358 - Daren 800-315-9950 x6032001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701.

New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item

ID-12526 - Tom 800-315-9950 x6042001 Quadco 22B Hot Saw with Low Mounted Arms - High Torque Single Pinion Wrist; All Cylinders Rebuilt; Saw Disc Re-Centered to 1 3/8" thick, $3500.00 Value; New Beaver teeth; Saw Motor Rebuilt, new shaft and Adapter Spline; Drive shaft bearing surfaces re-chromed to new spec, New Bearings & Seals; All Cracks Repaired; New Paint. - Item ID-12471 - Tom 800-315-9950 x6042002 New Holland TV140

w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800-315-9950 x6042005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID-12413 - Tom 800-315-9950 x6042005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to allow for that. Complete with computer and some spare parts. Chain size is .404 top and 3/4 bottom. No drive motors have been replaced. All working well. One cylinder leaking slightly. He is original


Shop Built Portable Firewood Processorw/48” Circle SawItem ID: 12507Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2007 Tigercat 250 w/2011 Log Max 7000XTItem ID: 12366Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

owner. Machine received Waratah updates by Waratah about 2 years ago. New knives. There is a pilot filter but not an inline filter - Item ID-12420 - Tom 800-315-9950 x6042006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours! It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/double articulated platform. Priced well below dealer cost. This is a bargain from the manufacturer that won’t be seen again. See more at www.lamtrac.com. - Item ID-12353 - Tom 800-315-9950 x6042006 Log Lift 115Z Foldable Self Loader - Never mounted. This loader is the highest

quality on the market. Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in it’s class. Piston pumps give smooth fast

cycle times. Cab is heated and has joystick controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x6042006 Talbert 25T Trailer - Model 25XPL Tri-Axle. 25 ton capacity with 25’ Floor with 6’ Dove. ABS. Tires at 70%. Very Good Condition. - Item ID-12416 - Tom 800-315-9950 x6042007 Kenworth W900B Log Truck w/Loader - Only 129,000 miles. Great condition. C-15 Cat engine with 18 speed transmission. New Tires. 24’ bed. Chalmers Axles,

20K Front; 46K Rear. Hubler Brothers Loader installation of Prentice 2124 includes headache rack oil cooler. 2011 Pitts Pup Trailer adds $10,000. - Item ID-12412 - Tom 800-315-9950 x6042007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours. The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get

See us at Booth M-3,Outside near Old


40’ Finch Tri-axle Log TrailerItem ID: 12505Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Euclid Dump Truck R-13Item ID: 12373Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2007 Morbark 22 RXL ChipperGreat Chip Quality!!Item ID: 12449Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

‘94 Husky 235XL Loader PackageItem ID: 12445Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

the job done quickly and efficiently without the hassle of having 4 machines to do one job; the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 - Tom 800-315-9950 x6042008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine to

go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID-12354 - Tom 800-315-9950 x604

2008 Mack CHU 633 w/Low Boy Trailer - 150k miles on it. Vin is 1M1AN07Y98N001230. Also has a 2010 Kaufman trailer FR50DT in excellent condition. Fantastic value. - Item ID-12535 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics;

Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x6042009 Dynamic 585 Whole Tree Chipper - NEW! - Never


SKIDDER TIRES

TRUCK TIRES

(800) 537-2042

ASK ABOUT FREE DELIVERY

“Providing a full range of industrial metal detectors since 1965.”

MDI PROBE 2100PORTABLE INDUSTRIAL METAL DETECTORSIMPLE TO OPERATE – just turn on and go!MDI’S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log!

with adjustable sensitivity control

eliminates mineral interference from logs or round for maximum detection depths

indicates signal strength and battery level

allows precision pinpointing of tramp metal

www.metaldetectorsinc.com

2010 JD 648H Grapple SkidderLess than 3000 hours!Item ID: 12473Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

45’ Tri-axle Log Trailer w/ Prentice 120 LoaderItem ID: 12506Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Sold! Just 13 demo hours. Full factory warranty and updates. Model CH 585. S/N available on request. Cummins 500 HP Engine. 28” x 22” Capacity. Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and best quality chips. Reversing engine fan. Best price on market! - Item ID-12400 - Tom 800-315-9950 x6042009 Risley Eclipse R300 Mulcher - Well maintained machine with only 585 hours. Owner downsizing operation. All components in excellent condition. Tracks at 90%. Risley Mulching Head cuts 102” wide. Weighs 30,400 lbs without head. POWER: Cummins™ QSL 9 litre Tier 3, 300hp @ 2100 rpm (BULGE 325HP @1900RPM); Spark arrestor muffler; 24 volt 2-12 volt batteries; 140 amp alternator; FlexXairE™ Fan system (auto/man-reversing, VARIABLE PIT CH) POWER TRAIN; Transmission - Dual-path closed loop hydrostatic (Sauer-Danfoss™); Track Drive - Lohman GFT - 40 with Rexroth motors; Hydraulic filtration - Full flow; Attach ment - High Pressure/full flow filtration TRACK; “Chainless” STEEL FlexTrac™; Interlocking 28" wide, single grouser (STEEL ) Pads (Traction lug ready); Rubber bush ing supported with high strength pins - Item ID-12534 - Tom 800-315-9950 x6042011 Pitts Pup Trailer - Excellent condition. Tires at 80% Stakes straight. Photos

say it all. - Item ID-12415 - Tom 800-315-9950 x6042011 ‘NEW’ GN Roy Model 2252C Hot Saw - Brand new 22” capacity hot saw. Never mounted. 360 rotation, planetary drive in the wrist. Bent axial motor to run the planetary. They also us a 63 series Rexroth motor to turn the saw, same as Quadco, Koehring/JD, Cat etc. Includes new boom adapter & pins to match the machine. Save $25,000 off new price. - Item ID-12472 - Tom 800-315-9950 x60440’ Finch tri-axle Log Trailer - 18 bunks, tires are road ready, everything works on the trailer. - Item ID-12505 - Daren 800-315-9950 x60345’ Tri-axle Log Trailer with Prentice 120 loader - 45’ Tri-axle Log Trailer with Prentice 120 loader, 9 bunks, brakes and tires are road ready. - Item ID-12506 - Daren 800-315-9950 x603Eagerbeaver 20 Ton Trailer - 1987, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID-12179 - Chris 800-315-9950 x600Euclid Dump Truck Model R-13 - Euclid Dump Truck Model R-13, Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365 - Michelle 800-315-9950 x603Mack Truck $48,500 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear,


PIPER’SSaw Shop

Promotional Pricing OfferSimonds Red Streak Hard Back

$14.27 eachTell us you saw it here!

Limited

Time

Only$14.71 each

‘90 Prentice 210C Log Loader & 421 CTR SlasherItem ID: 12487Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘09 JD 437C Loader w/DelimberItem ID: 12523Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178 - Chris 800-315-9950 x600Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID-12176 - Chris 800-315-9950 x600Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603

MORBARK1987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute,

New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Daren 800-315-9950 x6031988 Morbark 27 RXL Whole Tree Chipper - Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!! - Item ID-12519 - Michelle 800-315-9950 x6031992 Morbark 6300 3 Wheeled Feller Buncher with Hotsaw head - 1392 hours, tires are 80%+/-, Machine is WOODS ready!! - Item ID-12514 -

Michelle 800-315-9950 x6031993 Morbark 6300 Feller Buncher on tracks with Hotsaw - undercarriage is in GOOD condition, Machine is WOODS ready!! - Item ID-12515 - Michelle 800-315-9950 x6031993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work. Compact for the size. Has loader so unit is totally self contained. Tracks at 60%. Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog

- Just refurbished at factory. Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condtion - Item ID-12423 - Tom 800-315-9950 x604

22RXL 2000 Morbark 22RXL Chiphavester - The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length 38” Transport


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148

1983 CAT 988B Loader w/Very Low Hours Item ID: 12375Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

2002 Vermeer Horizontal Grinder HG365Item ID: 12372Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1990 Volvo Grapple TruckItem ID: 12495Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

‘96 Timberjack 610 ForwarderItem ID: 12521Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x6032007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition. S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22" diameter chipping capacity, 75" diameter four-knife chipper disc with LH rotation Chip sizes: 5/8", 3/4", 7/8", 1", 1-1/4", 2". Hydraulic chipper hood for easy knife access. 30" x 10' CAT chain infeed bed. Enclosed weatherized operator's cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable

seat and joystick controls. Morbark 1000 knuckleboom loader, 25' reach, 210 swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10'. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID-12449 - Tom 800-315-9950 x604

13002003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6031995 Morbark Wolverine 3 wheeled with 18” Hotsaw head - 1995 Morbark Wolverine 3 wheeled with 18” Hotsaw head, 5351 hours, Drive tires are 90%, Machine is ready to Work. - Item ID-12516 - Michelle 800-315-9950 x603

1995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head. Machine is fast and in very good condition. - Item ID-12531 - Tom 800-315-9950 x604

PALLET MACHINERY2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind

wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27" X 52". This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 -


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Call (423) 698-0284

‘07 Liebherr A924B Wheeled Log LoaderItem ID: 12503Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2003 CordKing 60 w/CordKing ConveyorItem ID: 12442Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘05 Hydro-Ax 670 w/22” Sawhead Item ID: 12481Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘01 Precision 23/66 Whole Tree ChipperItem ID: 12526Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Daren 800-315-9950 x603PEERLESS

1992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension - Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID-12341 - Tom 800-315-9950 x6042006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top - Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-315-9950 x604

PRENTICE1997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel

engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x6042008 Prentice 2432 Dual Arch Skidder - Very good condition. 2800 Hours. 30.5 x 32 Tires at 60%. Working today. Machine is tight and dry. No blow by in Cummins engine. Dual Arch Grapple. Comfort Cab with AC/Heat/Stereo. - Item ID-12536 - Tom 800-315-9950 x6042010 Prentice 2670 w/Bunching Head - ONLY 1504 Hours. Excellent Condition. 34” Tires at 80%. One Owner. You will not find units like this on the market very often! - Item ID-12452 - Tom 800-315-9950 x604Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Chris 800-315-9950 x600

Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine. - Item ID-12172 - Chris 800-315-9950 x600

SHOW ALL 210’S 1990 Prentice 210c log loader and 421ctr slasher - Fair to good condition machine is used it has no oil leaks main bearings are tight, stick boom bushing should be replace in the near future but is still in good working condition replaced main pins and bushing in 2009 mounted on astep deck trailer 2001 CTR slasher with a 20 foot log deck machine works fine looking to upgrade - Item ID-12487 - Daren 800-315-9950 x603

210D 1993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 x604

2802005 Prentice 280 TMS - Good

running machine. Hour meter shows less than 5000 hours but owner believes it to have about 7800. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527 - Tom 800-315-9950 x604

3842004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800-315-9950 x6042005 Prentice 384 with Saw Hookups - 10123 Hours, 2nd owner, This machine is in very good condition and is ready to work!!! - Item ID-12396 - Daren 800-315-9950 x603

620FB 1999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value.


(2) ‘98 Valmet 603 3-Wheeled BuncherItem ID: 12525Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1987 Morbark 27 WCLNeeds motor!

Item ID: 12443Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1996 John Deere 548G Grapple SkidderItem ID: 12439Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1995 Morbark Wolverine 3-Wheeled Feller BuncherItem ID: 12531Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Quebec, Canada - Item ID-12134 - Tom 800-315-9950 x604

RECYCLING EQUIPMENT2003 Morbark 7600 - 2003 Morbark 7600 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-

11830 - Michelle 800-315-9950 x603

ROLLING STOCK1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes,

air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends

in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603

ROTOCHOPPER1997 Rotochopper 166 (New Engine) - Cat 3406 engine with 68 hours rebuilt 2 months ago by Caterpillar Main frame hour


Made in the USA

Nothing Eats Wood Like a Beaver

FEATURES:1 to 2 plus full cords per hour (128 cubic feet)Cuts up to 16” diameter and up to 20’ lengthsSplits wood from 12” to 24” lengthsSplitter cycle time 4.5 secondsPTO drivenHonda Engine GX-630 630cc

Call Toll Free1-800-569-6813

www.woodbeaver.net | [email protected]

Beaver Model 16THE FIREWOOD FACTORY COMING

SOONNew Models4

Safe

Durable

Reliable Convenient

$8995Optional Features Availale

Starting at

1984 Dresser 520BItem ID: 12485Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1977 Franklin 132 XL ForwarderItem ID: 12528Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘06 Tigercat 726E Feller BuncherItem ID: 12529Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2009 Tigercat 720E Feller BuncherItem ID: 12530Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

meter 3898, New powerfeed and bearings about a year ago, New main bearing on rotor about 8 months ago, Turbo 2 years old, Spare tire/rim. This Machine is priced to sell quick!!!! - Item ID-12427 - Daren 800-315-9950 x6031998 Rotochopper 166 with Coloring system - less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel. This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x603

SAWMILL1992 Sanborn sawmill Mini-Max - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. Price includes set up and training so you know you will be getting a great machine! - Item ID-12084 - Tom 800-315-9950 x604

1998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50 series Detroit power unit; Fully automatic; Cab a/c ; Live deck 30 ft; 1 live off bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! - Item ID-12461 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type

turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604

SHAVING EQUIPMENT2009 Salsco 30" Shaving Mill - 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Chris 800-315-9950 x600

TIGERCAT1998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6042004 Tigercat 724D Feller Buncher - Only 2800 CONFIRMED hours. One owner who is a construction contractor that only used this machine on occasion. New engine installed in 2010. Tigercat 22” Hot Saw. Shows 44” tires, but will be equipped with 30.5 x 32 tires at 75%. - Item ID-12496 - Tom 800-315-


Why?Why?We use only the highest quality nickel alloy steel NEW state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and manufacturing experience

Proudly made in the USAStock to 10 days on standard sizesNations largest distributor/manufacturer of saws and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

9950 x6042006 Tigercat 726E Feller Buncher - Unit has 6900 hours but new meter was recently installed at 6180 hours and only shows 716 hours. Owner has documentation to show true hours of 6900. Has 34” tires at 65%. Equipped with Tigercat 5702 felling head. Machine in very good condition and is ready to work. Unit is tight and dry with plenty of power. - Item ID-12529 - Tom 800-315-9950 x6042007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and in excellent condition. - Item ID-12347 - Tom 800-315-9950 x6042007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x6042007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x6042009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine. Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine runs strong with no blow by. Machine is tight and dry. Ready to work today - Item ID-12530 - Tom 800-315-9950 x604

TIMBCO1994 Timbco 425 Feller Buncher with Bar Saw Head - 9,142 Hours; 28in. Saw head; B Cummins Engine; Accumulator; Tracks need rails and sprockets; No leaks; Runs well; Ready to go and work. - Item ID-12417 - Tom 800-315-9950 x6041995 Timbco 445 with Quadco hotsaw - approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-12388 - Daren 800-315-9950 x6031997 Timbco 455EXL Feller Buncher w/Hot Saw - Decent machine running today. Approx. 12,800 hours. Undercarriage at 50%. Quadco 22” High Speed Disc Saw. Running today. Nice Price. - Item ID-12532 - Tom 800-315-9950 x6041999 Timbco 820 Forwarder - Good running condition. Tires at 80%. 5000 hours. Bunks included. - Item ID-12454 - Tom 800-315-9950 x6042001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. Ready to work. - Item ID-12486 - Tom 800-315-9950 x6042001 Timbco 445D with Quadco Sawhead - 12,560 hours. Runs good. Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation. About 3000 hours on rebuilt engine. Areas to repair: some cracked track pads, 2 or 3 cracks in lower carbody that were welded, and may need new seal on one of the pumps. Great value. - Item ID-12288 - Tom 800-315-9950 x6042003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump;


HEAVY DUTY FORKSAT BIG SAVINGS

IN STOCK

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

‘06 CAT M318 MH Great Yard Machine!

Item ID: 12520Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

CAT Excavator Model 235Item ID: 12371Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2005 Prentice 280 TMSItem ID: 12527Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2009 Risley Eclipse R300 MulcherItem ID: 12534Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Franklin Skidder 170PTItem ID: 12377Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 x6042008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 5300 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco 22” saw head gives great flexibility in production. Includes $18,000 in parts for rebuilding undercarriage. Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 x604Timbco Fellerbuncher - 2000, Model 425D, 8.3 Cummins Engine, approx. 7400 hours,U.C. New Drive Motors just installed. Like New, Timbco Bar Saw W/40 Degree Rotate with less than 1000 hours on it, Leveling System And Swing System Tight. Very Good Machine, Can Be Seen Working! - Item ID-12155 - Chris

800-315-9950 x600TIMBER KING

2004 Timberking TK560 Loader with CTR450 Delimber - 7200 hours, new knives in delimber, very tight and dry machine. WOODS READY!! - Item ID-12483 - Daren 800-315-9950 x603

TIMBERJACK1985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value! - Item

ID-12272 - Tom 800-315-9950 x6041999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x604

SHOW ALL 240’S 1992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good.

Gearmatic winch. Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-12274 - Tom 800-315-9950 x604

3801978 Timberjack 380 Dual Arch Grapple Skidder w/Winch - 2045 hours, tires are 60-70%, pins are tight, Machine is Ready for the WOODS! - Item ID-12513 - Michelle 800-315-9950 x603

450B 1988 Timberjack 450B Dual Arch Grapple Skidder w/winch - 2045 hours, 23.1 tires front


The Richmond ShowEXPO RICHMOND 2012Richmond Raceway Complex * Richmond, Virginia

Friday May 18 and Saturday May 19, 20129:00a.m. until 5:00p.m.

The 33rd East Coast Sawmill and Logging Equipment Exposition

There is no charge to attend theexposition if you pre-register; there will be a $10.00 chargefor those who register on-site.

EXPO RICHMOND 2012Co-sponsored by Virginia Polytechnic Institute& State University Cooperative Extension and

Virginia Forest Products Association

Return by April 9, 2012 to: EXPO RICHMOND 2012 P. O. Box 160 Sandston, VA 23150-0160

Your Name: Nickname:

Company: Title:

Address:

City: State: ZIP:

Telephone: FAX:

E-mail: Country (if not USA):

PLEASE CHECK ALL CLASSIFICATIONS OF INTEREST: -- (You must check at least one)G Sawmilling G Logging G Pallet Production/Recycling G Dealer Sales G Paper/Pulp

G Equipment Manufacturer G Plywood/Panel G Other (Please Specify) :Pre-registration allows entrance to the Exposition (May 18 - 19, 2012, 9am-5pm) at no charge. On-site registration is $10.00.

Exhibitors: Please do not use this form. Contact show office for exhibitor registration information.Additional information is available on the Internet at www.exporichmond.com

‘97 Timbco 455EXL Feller Buncher w/Hot SawItem ID: 12532Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Franklin Skidder 142Item ID: 12376Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

40% and rears are 50%+/-, Pins are tight, Machine is ready to WORK!! - Item ID-12512 - Michelle 800-315-9950 x603Timberjack 450B single arch grapple skidder w/winch - Timberjack 450B single arch grapple skidder w/winch, 1409 hours, tires are at 50% +/-, Center pins are tight, Ready for the WOODS!! - Item ID-12511 - Michelle 800-315-9950 x603

450C 1993 Timberjack 450C Dual

Arch Grapple Skidder w/Winch - Cummins engine, 1956 hours, tires are at 50%, center pins are tight, Machine is ready to go to work. - Item ID-12510 - Michelle 800-315-9950 x603

608S 2002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x603

6101996 Timberjack 610

Forwarder - Good running unit. Needs Brakes. All else works well. About 12000 hours.23.1X26 tires at 40%; 23.1X26 tires 70% Joystick controls; Manual transmission; Cummins Engine - Item ID-12521 - Tom 800-315-9950 x604

6602000 Timberjack 660 Dual Arch Grapple Skidder w/ Winch - Cummins Engine, 6803 hours, Tires are at 50% +/-, center pins are tight, Machine is WOODS ready!! - Item ID-12509

- Michelle 800-315-9950 x603VALMET

1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800-315-9950 x6041998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800-315-9950 x6041998 Valmet 911.1 Harvester - Single Owner machine. Super Clean and ready to go


2008 Mack CHU 633w/Lowboy TrailerItem ID: 12535Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

2008 Prentice 2432 Dual Arch SkidderItem ID: 12536Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1992 JD 643 Shear Feller BuncherItem ID: 12537Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

Clark 664D Cable SkidderItem ID: 12221Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2004 CAT 525B Grapple Skidder Item ID: 12424Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/hr. Slide Boom design easy to learn and operate. - Item ID-12338 - Tom 800-315-9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 11,800 hours. New hydraulic transmission and gear box. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade. Hood guard. - Item ID-12267 - Tom 800-315-9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton

Forwarder - 7200 Hours. Good Condition. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x604“2010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours. MFG warranty still applies. This machine is LOADED including the WEBASTO programmable pre-heater! Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this machine. Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x604

VERMEER2002 Vermeer Horizonal

Grinder Model HG365 - 2002 Vermeer Horizonal Grinder Model HG365, Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x603

VOLVO1997 Volvo A25C Articulated Dump Truck - Very good machine with 10,000 hours and one owner. $16,000 of recent service and maintenance by local Volvo Dealer. 6 x 6 all wheel drive capacity. Super Value! - Item ID-12444 - Tom 800-315-9950 x6042005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%. Comfortable cab with AC & Heat. Ready to load today. - Item ID-12404 - Tom 800-315-

9950 x604WANTED: USED 3-Wheeled Feller Bunchers - Lumberman’s has many customers who are looking for good used 3 wheeled bunchers like Valmet, Hydro-Ax, Bell, or Franklin. If you have an old but good running machine you need to sell, give Tom a call at 800-315-9950 Ext. 604 to get your top dollar! - Item ID-12502 - Tom 800-315-9950 x604

WHO1993 WHO P12-63XSHD - 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x603

THE LUMBERMAN’S EXCHANGE PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

The Lumberman's Exchange brought to you by LBXonline.com

Documents

Transcript of The Lumberman's Exchange brought to you by LBXonline.com