The Inside Pages of This Manual Contain

8/14/2019 The Inside Pages of This Manual Contain

1/183

ForewordWelcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. Itwas produced using the latest techniques and strict quality control.

This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles odriving pleasure. Please read through this manual before operating your vehicle.

A separate Warranty Information Booklet explains details about the warranties covering your vehicle.Your NISSAN dealer knows your vehicle best. When you require any service or have any questions, he will be glad to assist you with thextensive resources available to him.

IMPORTANT SAFETY INFORMATION

REMINDERS FOR SAFETY!

Follow these five important rules to help ensure a safe and completetrip for you and your passengers!

NEVER drive under the influence of alcohol or drugs.

ALWAYS observe posted speed limits and never drive toofast for conditions.

ALWAYS use your seat belts and appropriate child restraintsystems.

ALWAYS provide information about the proper use of ve-hicle safety features to all occupants of the vehicle.

ALWAYS review this Owners Manual for important safetyinformation.

1995 NISSAN NORTH AMERICA, INC.TORRANCE, CALIFORNIA

NOTES ON THE INFORMATION CONTAINED INTHIS OWNERS MANUAL

This owners manual contains descriptions and operatininstructions for all systems, features and optional equipmenthat might appear in any model of this vehicle built for andestination in North America, including the continental Unite

States, Canada and Hawaii. Therefore, you may very well fininformation in this manual that does not apply to your vehicle

MODIFICATION OF YOUR VEHICLE

This vehicle should not be modified. Modification could affect itsperformance, safety or durability, and may even violate govern-mental regulations. In addition, damage or performance prob-lems resulting from modifications may not be covered underNISSAN warranties.

All information, specifications and illustrations in this manual are thosin effect at the time of printing. NISSAN reserves the right to changspecifications or design without notice and without obligation.

The inside pages of this manual containa minimum of 50% recycled fibers,including 10% post-consumer fibers.


2/183

Welcome To The World Of NISSAN

Your new Nissan is the result of our dedication toproduce the finest in safe, reliable and economi-cal transportation. Your vehicle is the product of

a successful worldwide company that manufac-tures cars and trucks in over 20 countries anddistributes them in 150 nations.

Nissan vehicles are designed and manufacturedby Nissan Motor Co., Ltd. which was founded inTokyo, Japan in 1933, and Nissan affiliates worldwide, collectively growing to become the fourthlargest automaker in the world. In addition to carsand trucks, Nissan also makes textile machinery,forklift trucks, marine engines, boats and otherproducts.

Nissan has made a substantial and growinginvestment in North America, starting with theopening of Nissan Motor Corporation in U.S.A. in1960, continuing with the production of somecars and trucks at one of the worlds most

modern manufacturing facilities in Smyrna, Ten-nessee, vehicle styling at Nissan Design Interna-tional in San Diego, California, and engineering

at Nissan Research and Development in Farm-ington Hills, Michigan.

Nissan Motor Corporation in U.S.A. and its deal-ers employ about 50,000 Americans.

Nissan is also a substantial contributor to theCanadian economy. Nissan Canada Inc. and its200 dealers and suppliers employ approximately4,000 people. These include company employ-ees and the staffs of Nissan dealers all acrossCanada. In addition, many Canadians work forcompanies that supply Nissan and Nissan deal-ers with materials and services ranging from the

operation of port facilities and transportation ser-vices, to the supply of lubricants, parts andaccessories.

Nissan pioneered the use of electronics ancomputers in automobiles, and has led the indutry in improving both performance and fuel efciency through new engine designs and the usof synthetic materials to reduce vehicle weighThe company has also developed ways to buiquality into its vehicles at each stage of thproduction process, both through extensive usof automation and most importantly through an awareness that people are the cetral element in quality control.

From the time the parts arrived from our suppers until you took delivery of your new Nissadozens of checks were made to ensure that onthe best job was being done in producing andelivering your vehicle. Nissan also takes grecare to ensure that when you take your Nissan your dealer for maintenance, the service techncian will perform his work according to the quali

standards that have been established by thfactory.

Safety has also been built into your Nissan. Ayou know, seat belts are an integral part of thsafety systems that will help protect you and youpassengers in the event of a sudden stop or aaccident. We urge you to use the belts every timyou drive the vehicle.

The Nissan story of growth and achievemereflects our major goal: to provide you, ocustomer, with a vehicle that is built with qualitand craftsmanship a product that we can bproud to build and you can be proud to own.

AFW0001

The inside pages of this manual containa minimum of 50% recycled fibers,including 10% post-consumer fibers.


3/183

NISSAN CUSTOMER CARE PROGRAMNISSAN CARES ...

Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and youNISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and servicneeds.

However, if there is something that your NISSAN dealer cannotassist you with or you would like to provide NISSAN directly withcomments or questions, please contact the NISSAN ConsumerAffairs Department using our toll-free number:

For U.S. mainland customers1-800-NISSAN-1 (1-800-647-7261)

For Hawaii customers(808) 531-0231 (Oahu Number)

For Canada customers1-800-387-0122

The Consumer Affairs Department will ask for the following infor-mation:

Your name, address, and telephone number

Vehicle identification number (on dashboard)

Date of purchase

Current odometer reading

Your NISSAN dealers name

Your comments or questions

ORYou can write to NISSAN with the information on the left at:

For U.S. mainland and Alaska customersNissan Motor Corporation in U.S.A.Consumer Affairs DepartmentP.O. Box 191Gardena, California 90247

For Hawaii customersNissan Motor Corporation in Hawaii

2880 Kilihau St.Honolulu, Hawaii 96819

For Canada customersNissan Canada Inc.P.O. Box 1709, Station BMississauga, Ontario L4Y 4H6

We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.


4/183

Contents Instruments and controls

Pre-driving checks and adjustments

Heater, air conditioner and audio system

Starting and driving

In case of emergency

Appearance and interior care

Do-it-yourself operations

Maintenance schedule

Technical and consumer information

Index


5/183


6/183

1 Instruments and controls

Meters and gauges .............................................. 1-2

Speedometer and odometer ................................ 1-3

Tachometer .......................................................... 1-3

Engine coolant temperature gauge and

Fuel gauge ........................................................... 1-4

Warning/indicator lights and chimes .................... 1-5

Theft warning (If so equipped)............................. 1-8

Windshield wiper and washer switch................... 1-9

Rear window defogger switch............................ 1-10

Headlight and turn signal switch ........................ 1-11Cornering light .................................................... 1-12

Instrument brightness control............................. 1-12

Front fog light switch (If so equipped) ............... 1-13

Hazard warning flasher switch........................... 1-13

Cigarette lighter (accessory) and ashtray .......... 1-14

Cup holder.......................................................... 1-14

Power windows (If so equipped)........................ 1-15

Sunroof (If so equipped) .................................... 1-17

Clock instrument panel (If so equipped) ....... 1-18

Interior light......................................................... 1-18

Spotlight (If so equipped)................................... 1-19Trunk light........................................................... 1-19


7/183

AIC052

METERS AND GAUGES

1-2


8/183

Speedometer

The speedometer indicates vehicle speed.

Odometer

The odometer records the total distance thevehicle has been driven.

Trip odometer

The trip odometer records the distance ofindividual trips. Before each trip, set the tripodometer to zero by pushing the reset but-

ton.

The tachometer indicates engine speed in

revolutions per minute (rpm).CAUTION

When engine speed approaches thered zone, shift to a higher gear. Enginespeed in the red zone may cause seri-ous engine damage.

IC1261 AIC0076

SPEEDOMETER ANDODOMETER

TACHOMETER

1-3


9/183

Engine coolant temperature gauge

The gauge indicates the engine coolanttemperature.

The engine coolant temperature will varywith the outside air temperature and drivingconditions.

CAUTION

If the gauge indicates over the normalrange, stop the vehicle as soon assafely possible. If the engine is over-heated, continued operation of the ve-

hicle may seriously damage the engine.See the In case of emergency sectionfor immediate action required.

Fuel gauge

The gauge indicates the APPROXIMATEfuel level in the tank.

The gauge may move slightly during brak-

ing, turning, acceleration, or going up ordownhill.

The gauge needle is designed to hold itsposition when the ignition key is turnedOFF.

The indicator light comes on when theamount of fuel in the tank is getting low.Refuel as soon as it is convenient, prefer-ably before the gauge reaches E. Thereshould be a small reserve of fuel in the tankwhen the fuel gauge needle reaches E.

AIC0077

ENGINE COOLANTTEMPERATURE GAUGE ANDFUEL GAUGE

1-4


10/183

Checking bulbs

Apply the parking brake and turn the ignitionkey to ON without starting the engine. Thefollowing lights will come on:

, or , , ,

The following lights come on briefly andthen go off:

or , ,

If any light fails to come on, it may indicatea burned-out bulb or an open circuit in the

electrical system. Have the system repaired

promptly.

Engine oil pressure warninglight

This light warns of low engine oil pressure. Ifthe light flickers or comes on during normaldriving, pull off the road in a safe area, stopthe engine immediately and call a NISSANdealer or other authorized repair shop. Run-ning the engine with the oil pressurewarning light on could cause seriousdamage to the engine.

The oil pressure warning light is no

designed to indicate a low oil level. Usthe dipstick to check the oil level. SeEngine oil in the Do-it-yourself opertions section.

Charge warning light

If this light comes on while the engine running, it may indicate that there is something wrong with the charging system. Turthe engine off and check the generator be

If the belt is loose, broken, missing or if thlight remains on, see your NISSAN dealeimmediately.

or Brake warning light Seat belt warning light Engine oil pressure warning light

Turn signal/hazard indicator lightsLow washer fluid warning light(Canada only)

CRUISE indicator light

High beam indicator light or Anti-lock brake warning light Air bag warning light

Charge warning light Overdrive off indicator light Rear window defogger indicator light

Door open warning lightMalfunction indicator light (emissionsystem)

Theft warning light (If so equipped)

WARNING/INDICATORLIGHTS AND CHIMES

1-5


11/183

CAUTION

Do not continue driving if the belt isloose, broken or missing.

Door open warning lightThis light comes on when any of the doorsare not closed securely while the ignitionkey is ON.

Seat belt warning light andchime

This light and chime remind you to fastenseat belts. The light illuminates whenever

the ignition key is turned to ON, and willremain illuminated until the drivers seat beltis fastened. At the same time, the chime willsound for about seven seconds unless thedrivers seat belt is securely fastened.

Refer to Seat belts in the Pre-drivingchecks and adjustments section for pre-cautions on seat belt usage.

Air bag warning light

When the ignition key is in the ON orSTART position, the air bag light willilluminate for about 7 seconds and then turn

off. This means the Air Bag SupplementalRestraint System is operational.

If any of the following conditions occur, the airbag system needs servicing and your vehicleshould be taken to your nearest authorized

NISSAN dealer as soon as practical.

1. The air bag light does not come on for 7seconds and then go off as describedabove.

2. The air bag light flashes intermittently orremains on.

3. The air bag light does not come on at all.

Unless checked and repaired, the Supple-

mental Restraint System may not functionproperly. For additional details, see Supple-mental Restraint System in the Pre-drivingchecks and adjustments section.

Low washer fluid warninglight (Canada only)

This light comes on when the washer tankfluid is at a low level. Add washer fluid asnecessary. See the Do-it-yourself opera-

tions section.

or Brake warning ligh

This light functions for both the parkinbrake and the foot brake systems.

Parking brake indicator:

The light comes on when the parking brakis applied.

Low brake fluid warning:

The light warns of a low brake fluid level. the light comes on while the engine running with the parking brake not appliedstop the vehicle and perform the following

1. Check the brake fluid level. Add brakfluid as necessary. See Brake an

clutch fluid in the Do-it-yourself operations section.

2. If the brake fluid level is correct, checthe warning system.

WARNING

If you judge it to be safe, drive carefully to the nearest service stationfor repairs. Otherwise, have your vehicle towed because driving it could

be dangerous.

1-6


12/183

Pressing the brake pedal with theengine stopped and/or low brakefluid level may increase your stop-ping distance and require greaterpedal effort as well as greater pedal

travel.

Brake pad wear warning

The disc brake pads have audible wearwarnings. When a brake pad requires re-placement, it will make a high pitched scrap-ing sound when the vehicle is in motionwhether or not the brake pedal is de-pressed. Have the brakes checked as soonas possible if the warning sound is heard.

or Anti-lock brakewarning light

If this light comes on while the engine isrunning, it may indicate there is somethingwrong with the anti-lock portion of the brakesystem. Have the system checked by yourNISSAN dealer.

If an abnormality occurs in the system, theanti-lock function will cease but the regularbraking system will continue to operate nor-mally.

If the light comes on while you are driving,

contact your NISSAN dealer for repair.

Overdrive off indicator light

This light comes on when the overdriveswitch is pushed to the OFF position.

Turn signal/hazard indicatorlights

This light flashes when the turn signalswitch lever or hazard switch is turned on.

High beam indicator light(Blue)

This light comes on when the headlight highbeam is on and goes out when the low

beam is selected.

Rear window defogger indi-cator light

This light comes on when the rear defoggerswitch is activated.

Indicator light

This light comes on while the vehicle speedis controlled by the cruise control system. Ifthe CRUISE indicator blinks, have the sys-tem checked by your NISSAN dealer.

Theft warning light (If sequipped)

This light is used to verify theft warninsystem activation. For further info, seTheft Warning later in this chapter.

Key reminder chime

The chime will sound if the driver side doois opened while the key is left in the ignitioswitch. Remove the key and take it with yowhen leaving the vehicle.

Light reminder chime

A chime will sound when the driver siddoor is opened if the light switch is turned o

(ignition switch is turned off).Turn the light switch off when you leave thvehicle.

Malfunction indicator ligh(MIL)

If the MIL comes on or blinks while thengine is running, it may indicate a potentiemission control problem.

1-7


13/183

CAUTION

Continued operation without havingthe emission control systemchecked and repaired as necessarycould lead to poor driveability, re-

duced fuel economy, and possibledamage to the emission control sys-tem which may affect your warrantycoverage.

Although the vehicle is still drive-able, see your nearest NISSANdealer as soon as possible. To avoidsystem damage, do not drive atspeeds above 45 MPH (72 km/h). Ifpossible, avoid hard acceleration or

deceleration.

If the fuel filler cap is not tightened properly,the MIL may come on. Check and securelytighten the fuel filler cap, and have yourvehicle checked as noted above.

The theft warning system provides visualand audio alarm signals if parts of thevehicle are disturbed.

How to activate the theft warningsystem

1. Remove the key from the ignition switch.

2. Close all windows. Close and lock alldoors, hood and trunk lid. The doors canbe locked either with or without the key.

The system can be activated even if the

windows are open.

3. Confirm that the indicator light comes on.

The light will glow for about 30 secondand then go out. The system is noactivated. If, during this 30-second timperiod, the door is unlocked or the igntion key is turned to ACC or ON, th

system will not activate.

CAUTION

If the key is turned slowly when locking the door, the system may noactivate. Furthermore, if the key isturned excessively to the unlock position, the system may be deactivated when the key is removed. If theindicator light fails to glow for 30seconds, unlock the door once andlock it again.

Even when the driver and/or passengers are in the vehicle, the systemwill activate with all doors, hoodtrunk lid and back door locked andignition key off. Turn the ignition keyto ACC or ON to turn the systemoff.

IC0005

THEFT WARNING(If so equipped)

1-8


14/183

Theft warning system operation

The warning system will give the followingalarm:

The headlights blink and the horn sounds

intermittently. In addition, the starter mo-tor will not operate.

The alarm automatically turns off after 2to 3 minutes; however, the alarm willreactivate if the vehicle is tampered withagain. The alarm can be shut off byunlocking a door or trunk lid with the key.

The alarm is activated by:

Opening the door or trunk lid withoutusing the key (even if the door is un-locked by releasing the door inside lockswitch) or opening the trunk lid by oper-ating the opener lever.

Opening the hood.

Pushing in or pulling out of the keycylinder on the door or trunk lid.

How to stop the alarm

The alarm will stop only by unlocking a door

or the trunk lid with the key. The alarm willnot stop if the ignition switch is turned toACC or ON.

If the system does not operate as de-scribed above, have it checked by yourNISSAN dealer.

Push the lever down to operate the windshield wipers. Pull the lever toward you toperate the washer.

Intermittent operation can be adjusted fro2 to approximately 20 seconds by turninthe knob (Type B only).

AIC007

WINDSHIELD WIPER ANDWASHER SWITCH

1-9


15/183

The wipers cycle twice when the washer isactivated.

CAUTION

Do not operate the washer continu-

ously for more than 30 seconds. Do not operate the washer if the

reservoir tank is dry.

WARNING

In freezing temperatures the washersolution may freeze on the windshieldand obscure your vision. Warm thewindshield with the defroster before

you wash the windshield.

To defog the rear window glass, start theengine and push the rear window defoggerswitch on. The rear window defogger indi-cator light in the meter will come on. Pushthe switch again to turn the defogger off.

It will automatically turn off in approximately15 minutes.

CAUTION

When cleaning the inner side of thewindow, be careful not to scratch or

damage the electrical conductors.

NOTE: On some vehicles, the top few rowof wires on the rear window are not part othe rear window defogging system. Theswires, if so equipped, make up the diversitantenna for the audio system.

IC1267

REAR WINDOW DEFOGGERSWITCH

1-10


16/183

Lighting

Turn the switch to the posit ion.The front park, side marker, tail, license

plate and instrument lights will come on.Turn the switch to the position. Head-

lights will come on and all the other lightsremain on.

To select the high beam, push the lever

forward. Pull it back to select the low beam.

Daytime running light system(For Canada)

Even if the headlight control switch is ofthe headlights high beams will illuminaafter starting the engine. The headlights wbe a little dimmer than they are with thheadlight switch in the position.

If the parking brake is applied before thengine is started, the daytime running lightwill not be illuminated. The daytime runninlights will illuminate once the parking brakis released. Thereafter, the daytime runninlights will not turn off when using the parkinbrake at stop signals, etc.

WARNING

When the daytime running light systemis active, tail lights on your vehicle wilnot be on. It is necessary at dusk toturn on your headlights. Failure to doso could cause an accident injuringyourself and others.

Passing signal

Pulling the lever toward you will turn on thheadlight high beam.

AIC0505

HEADLIGHT AND TURNSIGNAL SWITCH

1-11


17/183

Turn signal

Move the lever up or down to signal theturning direction. When the turn is com-pleted, the turn signals cancel automati-cally.

Lane change signal

To indicate a lane change, move the leverup or down to the point where lights beginflashing.

The cornering light provides additional illu-mination toward the turning direction onsome models. The light on the turning direc-tion side will come on when the turn signallever is moved to the right or left with theheadlights on.

The instrument brightness control operatewhen the l ight switch is in the o position.

Turn the control to adjust the brightness oinstrument panel lights.

NOTE: For vehicles with the clock located the instrument panel (if so equipped) thinstrument brightness control function hano effect on the brightness of the clock.

IC1030 IC126

CORNERING LIGHT INSTRUMENT BRIGHTNESSCONTROL

1-12


18/183

To turn the fog lights on, turn the switchtoward the front of the vehicle to the

position.

To turn them off, turn the switch toward theback of the vehicle to the OFF position.

The low-beam headlight function must beon for the fog lights to operate. The foglights will automatically turn off wheneverthe high-beam headlight function is se-lected.

Push the switch on to warn other driverswhen you must stop or park under emer-

gency conditions. All turn signal lights willflash.

WARNING

When stalled or stopped on the road-way under emergency conditions,move the vehicle well off the road.

Do not use the switch while movingon the highway unless unusual circumstances force you to drive soslowly that your vehicle might become a hazard to other traffic.

Some state laws may prohibit theuse of the hazard warning flasheswitch while driving.

Turn signals do not work when theswitch is operating.

The hazard warning flasher can be actuatewith the ignition switch either OFF or ON.

IC1292 IC1271

FRONT FOG LIGHT SWITCH(If so equipped)

HAZARD WARNING FLASHERSWITCH

1-13


19/183

The cigarette lighter element is an acces-sory. A genuine NISSAN Cigarette Lighter

or equivalent can be purchased from yourlocal NISSAN dealer.

The cigarette lighter operates when theignition switch is in the ACC or ONposition.

Push the lighter in all the way. When thelighter is heated, it will spring out.

Return the lighter to its original position afteruse.

CAUTION

The cigarette lighter socket is a powersource for the cigarette lighter elementonly. The use of the cigarette lightersocket as a power source for any other

accessory is not recommended.

WARNING

The cigarette lighter should not beused while driving in order that fullattention may be given to the drivingoperation.

To open, pull out the cup holder.

To close, push in the cup holder.The cup holder and the ashtray cannot bused at the same time. Close the ashtrabefore using the cup holder.

WARNING

The driver should not pull out the cupholder or remove or insert cups into thecup holder while driving in order thafull attention may be given to the driv

ing operation.

AIC0509 AIC008

CIGARETTE LIGHTER ANDASHTRAY

CUP HOLDER

1-14

POWER WINDOWS


20/183

WARNING

Avoid abrupt starting and brakingwhen the cup holder is being used toprevent spilling the drink. If the liquid ishot it can scald you or your passenger.

The power windows operate only when theignition key is in the ON position. To open

a window, press and hold the switch in theOPEN position. To close a window, pushand hold the switch in the CLOSE posi-tion. To stop the opening or closing functionat any time, simply release the switch.

The driver side control panel is equippedwith switches that can open or close all thewindows.

Locking passenger windows

When the power window lock switch on thdriver side control panel is pushed in, onthe driver side control panel can be used topen or close the windows. Push it in agato cancel this function.

The front passenger and both rear dooare each equipped with a power windoswitch. Each switch will open or close onthe corresponding window. To open oclose the window, press and hold th

switch.

AIC0518 AIC050

POWER WINDOWS(If so equipped)

1-15

POWER REAR WINDOWS


21/183

WARNING

Make sure that all passengers havetheir hands, etc. inside the vehiclebefore closing the windows.

Do not leave children unattended in-

side the vehicle. They could un-knowingly activate switches.

AUTOMATIC POWER WINDOW

SWITCHTo fully open the driver side window, completely press the driver side window switcdown and release it; it need not be held. Thwindow will automatically open all the waTo stop the window, press the switch towarthe CLOSE side.

IC1285 AIC051

POWER REAR WINDOWS

1-16

SUNROOF


22/183

The sunroof will only operate when theignition key is in the ON position.

Sliding the sunroof

To open the roof, press and hold the switchto the OPEN side.

To close the roof, press and hold the switchto the CLOSE side.

Tilting the sunroof

To tilt up, first close the sunroof, then pushand hold the UP side of the tilt switch. Toclose the sunroof, push and hold theDOWN side.

Sun shade

Open and close the sun shade by sliding itforward or backward.

The shade will open automatically when thesunroof is opened. However, it must beclosed manually.

WARNING

Be extremely careful not to have anypart of your body in the sunroofopening while the roof is closing.

Do not stand up or extend any por-tion of your body out of the openingwhile driving.

Remove water drops, snow, ice orsand from the sunroof beforeopening.

Do not place any heavy object on thesunroof or surrounding area.

IF THE SUNROOF DOES NOTCLOSE

AIC0091

AIC051

SUNROOF(If so equipped)

1-17

CLOCK INSTRUMENT INTERIOR LIGHT


23/183

CAUTION

Turn the ignition key to the OFFposition.

1. Remove the spotlight unit. The shaft endof the sunroof motor will be visible.

2. Using a 5mm (0.20 in) hex wrench, turnthe shaft clockwise to close the sunroof.

Have the sunroof system checked and re-paired by your NISSAN dealer.

The digital clock displays time when theignition key is in ACC or ON.

If the power supply is disconnected, theclock will not indicate the correct time.Readjust the time.

Adjusting the time

Push the H button to adjust the hour.

Push the M button to adjust the minute.

NOTE: The clock displays 12-hour time withno AM/PM indications.

The interior light will operate regardless oignition key position.

The interior light has a three-position switch

When the switch is in the OFF positiothe interior light will not illuminate, regardless of door position.

When the switch is in the center position, the interior light will illuminawhen a door is opened.

When the switch is in the ON position

the interior light will illuminate, whetheany door is open or closed.

AIC0500 IC1235M

CLOCK INSTRUMENTPANEL (If so equipped)

INTERIOR LIGHT

1-18

SPOTLIGHT (If so equipped) TRUNK LIGHT


24/183

NOTE: Leaving the interior light switch inthe ON position for extended periods oftime will result in a discharged battery.

The light illuminates when the trunk lid opened. When the trunk lid is closed, thlight will go off.

IC1019

IC1278

SPOTLIGHT (If so equipped) TRUNK LIGHT

1-19


25/183


26/183

2 Pre-driving checks and adjustments

Key ....................................................................... 2-2Door locks ............................................................ 2-2

Hood release ........................................................ 2-5

Glove box ............................................................. 2-5

Trunk lid lock operation........................................ 2-6

Fuel filler lid lock operation .................................. 2-7

Front seats ........................................................... 2-9

Rear seat............................................................ 2-11

Supplemental restraint system (air bag system). 2-12

Warning labels.................................................... 2-15Air bag warning light .......................................... 2-16

Seat belts ........................................................... 2-17

Child restraints for infants and small children.... 2-23

Tilting steering wheel ......................................... 2-30

Outside mirror remote control ............................ 2-30

Outside mirrors ................................................... 2-30

Inside mirror ....................................................... 2-31

Vanity mirror (If so equipped) ............................ 2-31

KEY DOOR LOCKS


27/183

The master key can be used for all thelocks.

A key number plate is supplied with yourkey. Record the key number on the keynumber plate and keep it in a safe place(such as your wallet), NOT IN THE CAR.NISSAN does not record key numbers so itis very important to keep track of your keynumber plate.

A key number is only necessary when youhave lost all keys and do not have one toduplicate from. If you still have a key, this

key can be duplicated by your NISSANdealer or a locksmith shop.

MANUAL DOOR LOCK

To lock the front doors from the outside, turnthe key toward the front of the vehicle. Tounlock, turn it toward the rear.

To lock a door from inside the vehicle, presthe lock lever (located above the doo

handle) until it is flush with the door paneTo unlock, pull the lock lever to its outeposition.

APD0512 PD1305 APD052

KEY DOOR LOCKS

2-2


28/183

POWER DOOR LOCK

The power door lock system allows you tolock or unlock all doors simultaneously.

Turning the front door key to the front of thevehicle will lock all doors.

Turning the front door key one time to therear of the vehicle will unlock the corre-sponding door. From that position, returningthe key to Neutral (where the key can onlybe removed and inserted) and turning it tothe rear again within 5 seconds will unlock

all doors.

To lock from the outside without a key, pushthe door lock button (driver side only) or the

door lock lever (driver or passenger side),then close the door. When locking the doorthis way, be certain not to leave the keyinside the vehicle.

All doors will automatically unlock with thekey in the ignition.

WARNING

Always have the doors locked whiledriving. Along with the use of seabelts, this provides greater safety inthe event of an accident by helpingto prevent persons from beingthrown from the vehicle. This alsohelps keep children and others fromunintentionally opening the doorsand will help keep out intruders.

Before opening any door, alwaylook for and avoid oncoming traffic

APD0528 APD0521 APD052

2-3


29/183

Do not leave children unattended in-side the vehicle. They may inadvert-ently activate switches.

CHILD SAFETY REAR DOORLOCK

Child safety locks help prevent rear doorsfrom being opened accidentally, especiallywhen small children are in the vehicle.

When the lever on each rear door is in thelock position, the door can be opened onlyfrom the outside.

PD1101

2-4

HOOD RELEASE GLOVE BOX


30/183

1. Pull the hood lock release handle 1

located below the instrument panel; thehood will then spring up slightly.

2. Push the lever2 at the front of the hoodwith your fingertips and raise the hood.

3. Insert the support rod3 into the slot onthe underside of the hood.

4. When closing the hood, return the sup-port rod to its original position, thenslowly close the hood and make sure itlocks into place.

When locking or unlocking the glove bouse the master key.

The glove box may be opened by pulling thhandle.

To illuminate the interior of the glove bothe headlight switch must be turned to th

or position (If so equipped).

WARNING

Keep glove box lid closed while drivingto help prevent injury in an accident oa sudden stop.

APD0505 PD131

2-5

TRUNK LID LOCK


31/183

Opener lever

The trunk lid opener lever is located on theoutside of the driver side seat. To open thetrunk lid, pull up the trunk lid opener lever.

To close, lower and push the trunk lid downsecurely.

Key operation

To open the trunk lid, turn the key clockwise. To close, lower and push the trunk ldown securely.

WARNING

Do not drive with the trunk lid openThis could allow dangerous exhausgases to be drawn into the vehicle.

APD0506 PD131

OPERATION

2-6

FUEL FILLER LID LOCK


32/183

OPENER CANCEL LEVER FORTRUNK LID

When this lever is in the CANCEL posi-tion, the trunk lid cannot be opened with thetrunk lid opener lever. It can be opened onlywith the key.

Opener lever

The fuel filler lid opener lever is located onthe outside of the driver side seat. To openthe fuel filler lid, push the opener leverdown. To lock, close the fuel filler lid se-curely.

APD0111 APD052

2-7


33/183

FUEL FILLER CAP

The fuel filler cap is a screw-on ratchetingtype. Tighten the cap clockwise until ratch-eting clicks are heard.

If the fuel filler cap is not tightened properly,the malfunction indicator light (MIL) maycome on.

CAUTION

Gasoline is extremely flammable andhighly explosive under certain condi-tions. Always stop the engine and donot smoke or allow open flames or

sparks near the vehicle whenrefueling.

Fuel may be under pressure. Turnthe cap one-half turn, and wait forany hissing sound to stop to pre-vent fuel from spraying out and pos-sible personal injury. Then removethe cap.

Use only a genuine NISSAN fuel fillercap as a replacement. It has a built-in

safety valve needed for proper op-eration of the fuel system and emis-sion control system. An incorrectcap can result in a serious malfunc-tion and possible injury.

If fuel is spilled on the car body,flush it away with water to avoidpaint damage.

Put the fuel filler cap on the cap holder whilrefueling.

PD1013 PD101

2-8

FRONT SEATS


34/183

SEAT ADJUSTMENT

WARNING

Do not adjust the drivers seat whiledriving. The seat may move sud-denly and could cause loss of con-trol of the vehicle.

After adjustment, gently rock in theseat to make sure it is securelylocked.

Forward and backward

Pull the lever up while you slide the seatforward or backward to the desired position.Release the lever to lock the seat in posi-tion.

Reclining

Pull the lever up and lean back until thedesired angle is obtained. To bring theseatback forward again, pull the lever andmove your body forward. The seatback willmove forward.

WARNING

Do not recline the seatback any morethan is needed for comfort when thvehicle is moving. Seat belts are moseffective when the occupant sits weback and upright in the seat. If the seais reclined, the risk of sliding under thelap belt and being injured is increased

APD0102

2-9


35/183

Lumbar support (If so equipped)

The lumbar support feature provides lowerback support for the driver. Move the leverup or down to adjust the seat lumbar area.

HEAD RESTRAINTS

Adjust the top of the head restraints levelwith the top of your ears.

To raise the head restraint, just pull it up. Tolower, push the lock knob and push thehead restraint down.

WARNING

Head restraints should be adjustedproperly as they may provide signifi-cant protection against whiplash in-

jury. Do not remove them.

APD0526 PD1319

2-10


36/183

REAR SEAT

Center armrest and tray

Pull the armrest forward until it is horizontal.

Then release the lever (inset) and pull thetray forward. With the armrest in this posi-

tion you are able to gain access to the trunk.

PD1320

2-11

SUPPLEMENTAL RESTRAINTSYSTEM (AIR BAG SYSTEM)


37/183

This Supplemental Restraint System sec-tion contains important information concern-ing the driver and passenger air bags. TheSupplemental Restraint System Air Bag canhelp reduce impact force to the driver and tothe front passenger in certain frontal colli-

sions. The air bags are designed to supple-ment the crash protection provided by thedriver and front passenger seat belts andare not a substitute for them. The seatbelts should always be correctly worn andthe driver and front passenger seated asuitable distance from the steering wheeland instrument panel. (See Seat belts forinstructions and precautions on seat beltusage.)

The supplemental air bags will operateonly when the ignition switch is in theON or START position.

WARNING

The supplemental air bags ordinarilywill not inflate in the event of a sideimpact, rear impact, roll over, or lowerseverity frontal collision; so alwayswear your seat belts to help reduce therisk or severity of injury in various

kinds of accidents.

WARNING

The seat belts and the supplemental airbags are most effective when you aresitting back and upright in the seat. Airbags inflate with great force. If you areunrestrained, leaning forward, sittingsideways or out of position in any way,you are at greater risk of injury or deathin a crash and may also receive seriousor fatal injuries from the supplementalair bag if you are up against it when itinflates. Always sit back against the

seatback and use the seatbelts.

IPD06IPD061

SYSTEM (AIR BAG SYSTEM)

2-12


38/183

WARNING

Never let children ride unrestrained asshown in the previous illustrations.

Children may be severely injured okilled when the supplemental air bag

inflates if they are not properlyrestrained.

Also, never install a rear-facing childrestraint in the front seat. See Childrestraints for infants and small children for details.

IPD063 IPD064

2-13


39/183

Air bag system

The driver air bag is located in the center ofthe steering wheel; the front passenger airbag is mounted in the dashboard above theglove box. The supplemental air bag systemis designed to inflate in higher severity fron-tal collisions, although it may inflate if theforces in another type of collision are similarto those of a higher severity frontal impact. Itmay not inflate in certain frontal collisions.Vehicle damage (or lack of it) is not alwaysan indication of proper air bag operation.

When the supplemental air bag inflates, afairly loud noise may be heard, followed by

release of smoke. This smoke is not harmfuland does not indicate a fire, but care should

be taken not to intentionally inhale it, as itmay cause irritation and choking. Thosewith a history of breathing trouble should getfresh air promptly.

The supplemental air bags, along with the useof seat belts, help to cushion the impact forceon the face and chest of the occupant. Theycan help save lives and reduce serious inju-ries. However, an inflating air bag may causefacial abrasions or other injuries. Air bags do

not provide restraint to the lower body.Seat belts should be correctly worn and the

driver and passenger seated upright as faas practical away from the steering wheel odashboard. Since the air bag inflates quickin order to help protect the occupant, thforce of the air bag inflating can increase thrisk of injury if the occupant is too close to o

is against the air bag module during inflatio

The supplemental air bag will deflate quickafter a collision.

The supplemental air bags will operatonly when the ignition switch is in thON or START position.

WARNING

Right after inflation, several supple

mental air bag system componentswill be hot. Do not touch them; youmay severely burn yourself.

No unauthorized changes should bemade to any components or wiring othe supplemental air bag system. Thisis to prevent accidental inflation othe supplemental air bag or damageto the supplemental air bag system.

Tampering with the supplemental ai

bag system may result in seriouspersonal injury. Tampering includes

APD0507

2-14

WARNING LABELS


40/183

changes to the steering wheel andthe instrument panel assembly byplacing material over the steeringwheel pad and above the dashboard,or by installing additional trim mate-rial around the supplemental air bag

system.

Do not place any objects on thesteering wheel pad or on the instru-ment panel. Also, do not place anyobjects between any occupant andthe steering wheel or instrumentpanel. Such objects may becomedangerous projectiles and cause in-jury if the air bag inflates.

Work around and on the supplemen-

tal air bag system should be done byan authorized NISSAN dealer. Instal-lation of electrical equipment shouldalso be done by an authorized NIS-SAN dealer. The yellow SRS wiringshould not be modified or discon-nected. Unauthorized electrical testequipment and probing devicesshould not be used on the supple-mental air bag system.

Warning labels about the supplemental airbag system are placed in the vehicle.

APD051

2-15

AIR BAG WARNING LIGHT


41/183

The supplemental air bag light, displayingAIR BAG in the instrument panel, moni-

tors the circuits of the air bag. The circuitsmonitored by the air bag light are the diag-nosis sensor unit, air bag modules and allrelated wiring.

When the ignition key is in the ON orSTART position, the supplemental air baglight will illuminate for about 7 seconds andthen turn off. This means the system isoperational.

If any of the following conditions occur, thesupplemental air bag needs servicing:

1. The supplemental air bag light does notcome on for 7 seconds and then go off asdescribed above.

2. The supplemental air bag light flashesintermittently or remains on.

3. The supplemental air bag light does notcome on at all.

Under these conditions, the SupplementalRestraint System Air Bag will not operateproperly. It must be checked and repaired.Take your vehicle to the nearest authorizedNISSAN dealer.

Repair and replacement procedure

The supplemental air bag system is de-signed to inflate on a one-time-only basis.As a reminder, unless it is damaged, thesupplemental air bag light will remain illumi-nated after inflation has occurred. Repairand replacement of the supplemental air bagsystem should be done only by authorizedNISSAN dealers. To ensure long-termfunctioning, the system must be in-spected 10 years after the date of manu-

facture as noted on the certification labellocated on the driver side front pillar.

When maintenance work is required on thvehicle, the supplemental air bag systeand related parts should be pointed out tthe person conducting the maintenancThe ignition key should always be in thLOCK position when working under th

hood or inside the vehicle.WARNING:

Once the supplemental air bag inflates, the air bag module will nofunction again and must be replaced. The supplemental air bagmodule cannot be repaired.

After a supplemental air bag inflatesthe front instrument panel assemblyshould be replaced by your NISSAN

dealer if damaged. The supplemental air bag system

should be inspected by an authorized NISSAN dealer if there is anydamage to the front end portion othe vehicle or replaced if the supplemental air bag has inflated.

When selling your vehicle, we request that you inform the buyer abouthe supplemental air bag system and

guide the buyer to the appropriatesections in this Owners Manual.

APD0523

2-16

SEAT BELTS


42/183

If you need to dispose of a supple-mental air bag or scrap the vehicle,contact an authorized NISSAN dealer.Correct supplemental air bag dis-posal procedures are set forth in theappropriate NISSAN Service Manual.

Incorrect disposal procedures couldcause personal injury.

PRECAUTIONS ON SEAT BELTUSAGE

If you are wearing your seat belt properlyadjusted, your chances of being injured orkilled in an accident and/or the severity of

injury may be greatly reduced. NISSANstrongly encourages you and all of yourpassengers to buckle up every time youdrive, even if your seating position includesan air bag.

Some states, provinces or territories re-quire that seat belts be worn at all timeswhen a vehicle is being driven.

WARNING

Every person who drives or rides inthis vehicle should use a seat belt atall times. Children should be in ap-propriate child restraints.

The belt should be properly adjustedto a snug fit. Failure to do so willreduce the effectiveness of the en-tire restraint system and increasesthe chance or severity of injury in anaccident.

Do not wear the belt inside out otwisted. Be sure the seat belt tongueis securely fastened to the propebuckle.

Do not allow more than one personto use the same belt.

All seat belt assemblies includingretractors and attaching hardwareshould be inspected after any collision at your NISSAN dealer. NISSANrecommends that all seat belt assemblies in use during a collision bereplaced unless the collision waminor and the belts show no damageand continue to operate properlySeat belt assemblies not in use dur

ing a collision should also be inspected and replaced if either damage or improper operation is noted

Never carry more people in the vehicle than there are seat belts.

If the seat belt warning light glows continuously while the ignition is turnedON with all doors closed and all seabelts fastened, it may indicate a malfunction in the system. Have the system

checked by your NISSAN dealer.

2-17


43/183

Be sure to observe the following pre-cautions when using seat belts. Failureto do so could increase the chanceand/or severity of injury in an accident.

Always route the shoulder belt overyour shoulder and across yourchest. Never run the belt under yourarm or across your neck. The beltshould be away from your face andneck, but not falling off yourshoulder.

Position the lap belt as low as pos-sible AROUND THE HIPS, NOT THEWAIST.

Serious injury or death can occur if

the seat belt is not worn properly.

CHILD SAFETY

Children need adults to help protectthem.

All U.S. states and provinces of Canadarequire the use of approved child restraintsfor infants and small children (See ChildRestraints for Infants and Small Childrenlater in this section).

In addition, there are many types of child

restraints available for larger children whichshould be used for maximum protection.

Infant or small child

NISSAN recommends that infants or smallchildren be placed in child restraint systems

that comply with Federal Motor VehicleSafety Standards or Canadian Motor Ve-hicle Safety Standards. You should choosea child restraint system that fits your vehicleand always follow the manufacturers in-structions for installation and use.

Children

Children who are too large for child re-straints should be seated and restrained by

the seat belts which are provided.NISSAN recommends that children sit in therear seat if possible. According to accidentstatistics, children are safer when properlyrestrained in the rear seat than in the frontseat.

If the childs seating position has a shoulderbelt that fits close to the face or neck, theuse of a booster seat (commercially avail-able) may help overcome this. The booster

seat should raise the child so that the shoul-der belt is properly positioned across the

top, middle portion of the shoulder and thlap belt is low on the hips. The booster seashould fit the vehicle seat and have a labecertifying that it complies with Federal MotoVehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once th

child has grown so the shoulder belt is nlonger on or near the face and neck, use thshoulder belt without the booster seat.

Never let a child stand or kneel on anseat and do not allow a child in the cargareas while the vehicle is moving.

Pregnant women

NISSAN recommends that pregnant womeuse seat belts. Contact your doctor for spe

cific recommendations. The lap belt shoube worn snug and positioned as low apossible around the hips, not the waist.

Injured persons

NISSAN recommends that injured personuse seat belts. Check with your doctor fospecific recommendations.

2-18


44/183

3-POINT TYPE WITH RETRACTORWARNING

Every person who drives or rides inthis vehicle should use a seat belt at alltimes.

Fastening the belts

1. Adjust the seat.

WARNING

The seatback should not be reclinedany more than needed for comfortwhen the vehicle is moving. Seat beltsare most effective when the occupantsits well back and upright in the seat. If

the seat is reclined, the risk of slidingunder the lap belt and being injured isincreased.

2. Slowly pull the seat belt out of the retrator and insert the tongue into the buck

until it snaps.The retractor is designed to lock durina sudden stop or on impact. A slopulling motion will permit the belt tmove, and allow you some freedom omovement in the seat.

APD0500 PD1023M

2-19


45/183

3. Position the lap belt portion low on thehips as shown.

4. Pull the shoulder belt portion toward theretractor to take up extra slack.

The front passenger side seat belt and rear3-point seat belts have a cinching mecha-nism for child seat installation. It is referredto as the automatic locking mode.

When the cinching mechanism is activatedthe seat belt cannot be withdrawn furtheruntil the seat belt tongue is detached from

the buckle and fully retracted. Once re-tracted, the seat belt is in the emergency

locking mode. Refer to Child Restraints forInfants and Small Children later in thissection for more information.

WARNING

The automatic locking mode should

be used only for child seat installa-tion. During normal seat belt use bya passenger, the locking modeshould not be activated. If it is acti-vated it may cause uncomfortableseat belt tension.

Unfastening the belts

To unfasten the belt, press the button on thebuckle. The seat belt will automatically re-tract.

Checking seat belt operation(3-point type with retractor)

Your seat belt retractors are designed tlock belt movement using two separatmethods:

1) When the belt is pulled quickly from thretractor.

2) When the vehicle slows down rapidly.

To increase your confidence in the beltcheck their operation as follows:

Grasp the shoulder belt and pull quickforward. The retractor should lock anrestrict further belt movement.

If the retractor does not lock during th

check or if you have any questions aboubelt operation, see your NISSAN dealer.

PD1024M

2-20


46/183

Shoulder belt height adjustment(For front seats)

The shoulder belt anchor height should beadjusted to the position best for you. (SeePrecautions on Seat Belt Usage.) To ad-

just, squeeze the release buttons, and thenmove it to the desired position, so the beltpasses over the center of the shoulder. Thebelt should be away from your face andneck, but not falling off of your shoulder.

WARNING

After adjustment, release the buttonsand try to move it up and down to makesure the shoulder belt anchor is se-curely fixed in position.

2-POINT TYPE WITHOUTRETRACTOR (center position of

rear seat)Fastening the belts

1. Insert the tongue into the buckle markeCENTER until it snaps.

PD1321 APD010

2-21


47/183

2. To lengthen, hold the tongue at a rightangle to the belt and pull on the belt. Toshorten, pull the end of the belt attachedto the belt clip away from the tongue, andthen pull the belt clip to take up the slack.

3. Position the lap belt low on the hips asillustrated.

Unfastening the beltTo unfasten the belt, press the button on thebuckle.

Selecting correct set of belts

The center seat belt buckle and tongue ar

identified by the CENTER label. The centeseat belt tongue can be fastened only intthe center seat belt buckle.

ICM021 APD0106 APD010

2-22

CHILD RESTRAINTS FORINFANTS AND SMALLCHILDREN


48/183

SEAT BELT EXTENDERS

If, because of body size or driving position,it is not possible to properly fit the lap-shoulder belt and fasten it, an extender isavailable which is compatible with the in-stalled seat belts. The extender adds ap-

proximately 8 inches (200 mm) of lengthand may be used for either the driver or frontpassenger seating position. See your NIS-SAN dealer for assistance if the extender isrequired.

WARNING

Only NISSAN belt extenders, madeby the same company which madethe original equipment belts, should

be used with NISSAN belts. Persons who can use the standard

seat belt should not use an extender.Such unnecessary use could resultin serious personal injury in theevent of an accident.

SEAT BELT MAINTENANCE

To clean the belt webbings, apply amild soap solution or any solution recom-mended for cleaning upholstery or car-pets. Then brush the webbing, wipe itwith a cloth and allow it to dry in the

shade. Do not allow the belts to retractuntil they are completely dry.

Periodically check to see that the beltand the metal components such asbuckles, tongues, retractors, flexiblewires and anchors work properly. If looseparts, deterioration, cuts or other dam-age on the webbing is found, the entirebelt assembly should be replaced.

WARNING

Infants and small children should always be placed in an appropriate childrestraint while riding in the vehicleFailure to use a child restraint can result in serious injury or death.

Children and infants should never becarried on your lap. It is not possible foeven the strongest adult to resist theforces of a severe accident. The childcould be crushed between the aduland parts of the vehicle. Also, do noput the same seat belt around bothyour child and yourself. In generalchild restraints are designed to be installed with a lap belt or the lap portion

of a three-point type seat belt.Nissan recommends that the child restraint be installed in the rear seatAccording to accident statistics, children are safer when properly restrainedin the rear seat than in the front seat.

An improperly installed child restraincould lead to serious injury or death inan accident.

CHILDREN

2-23


49/183

Child restraints specially designed for in-fants and small children are offered byseveral manufacturers. When selecting anychild restraint, keep the following points inmind:

1) Choose only a restraint with a label cer-tifying that it complies with Federal MotorVehicle Safety Standard 213 or Cana-dian Motor Vehicle Safety Standard 213.

2) Check the child restraint in your vehicleto be sure it is compatible with the vehi-cles seat belt system.

3) If the child restraint is compatible withyour vehicle, place your child in the childrestraint and check the various adjust-ments to be sure the child restraint iscompatible with your child. Always followall recommended procedures.

WARNING

Never install a rear-facing child re-straint in the front seat. A rear-facingchild restraint must only be used inthe rear seat. See Installation on

front passenger seat for details.

Follow all of the child restraint manu-facturers instructions for installa-tion and use. When purchasing achild restraint, be sure to select onewhich will fit your child and vehicle.It may not be possible to properly

install some types of child restraintsin your vehicle.

Improper use of a child restraint canresult in increased injuries for boththe infant or child and other occu-pants in the vehicle.

When your child restraint is not inuse, keep it secured with a seat beltto prevent it from being thrown for-ward in case of a sudden stop or

accident.

After attaching the child restraint,test it before you place the child in it.Tilt it from side to side. Try to tug itforward and check to see if the beltholds the restraint in place. If therestraint is not secure, tighten thebelt as necessary, or put the re-straint in another seat and test itagain.

If the child restraint is not anchoredproperly, the risk of a child beinginjured in a collision or a suddenstop greatly increases.

Adjustable seatbacks should be positioned to fit the child restraint, bu

as upright as possible.

Remember that a child restraint lefin a closed vehicle can become veryhot. Check the seating surface andbuckles before placing your child inthe child restraint.

All U.S. states and provinces oCanada require that infants andsmall children be restrained in approved child restraints at all times

while the vehicle is being operated.

For a front-facing child restraint, ithe seat position where it is installedhas a 3-point type lap/shoulder beltcheck to make sure the shoulder beldoes not go in front of the childface or neck. If it does, put the shoulder belt behind the child restraint.

2-24


50/183

If the seat belt in the position wherethe child restraint is installed re-quires a locking clip and it is notused, injuries could result from thechild restraint tipping over duringnormal vehicle braking or cornering.

Installation on rear seat

Center lap belt

Secure the child restraint with the lap belt asillustrated. Remove all slack in the lap beltfor a very tight fit by pulling forcefully on thelap belt adjustment.

APD0509 PD117

2-25


51/183

Installation on rear outboard seatingpositions

WARNING

The 3-point belt in your vehicle isequipped with a locking mode re-tractor which must be used wheninstalling a child restraint.

Failure to do so will result in thechild restraint not being properly se-cured. It could tip over or otherwisebe unsecured and cause injury to thechild in a sudden stop or collision.

When you install a child restraint in a rearoutboard seat, follow these steps:

1. Position the child restraint on the seat. Itcan be placed in a forward facing or rearfacing direction, depending on the size ofthe child. Always follow the restraint

manufacturers instructions.2. Route the seat belt tongue through the

child restraint and insert it into the buckleuntil you hear and feel the latch engage.Be sure to follow the child restraint manu-facturers instructions for belt routing.

3. Pull on the shoulder belt until all of thebelt is fully extended and a click is heard.At this time, the belt retractor is in theautomatic locking mode (child restraint

mode). It will revert back to emergencylocking mode when the belt is fully re-tracted.

4. Allow the belt to retract. A clicking soundwill be heard as the belt retracts. Thisindicates that the retractor is in the auto-matic locking mode. Pull down on the beltto remove any slack in the belt.

5. Before placing the child in the child restraint, use force to tilt the child restrainfrom side to side, and tug it forward tmake sure that it is securely held place.

6. Check that the retractor is in the automatic locking mode by trying to pull morbelt out of the retractor. If you cannot puany more belt webbing out of the retractor, the belt is in the automatic lockinmode.

7. Check to make sure the child restraint

properly secured prior to each use. If th

PD1331 PD133

2-26


52/183

belt is not locked, repeat steps 3 through6.

After the child restraint is removed and theseat belt is allowed to wind back into theretractor, the automatic locking mode (childrestraint mode) is canceled; the seat belt

may be used as normal and will only lockduring a sudden stop or impact.

TOP STRAP CHILD RESTRAINT

If your child restraint has a top strap, it must

be secured to the provided anchor point.Anchor bracket hardware must be installed.The top strap anchor bracket hardware isavailable through your NISSAN dealer.

U.S. Part #88894-89900Canadian Part #88894-89902

Secure the child restraint with the center lapbelt or the lap portion of an outboard 3-pointbelt and latch the top strap hook onto the

appropriate anchor bracket. To install theanchor bracket, a metric bolt of the dimen-

sions listed below must be used.

Bolt diameter: 8.0 mmBolt length: more than 1.18 in (30 mmThread pitch: 1.25 mm

Secure the top strap to the attaching bowhich provides the straightest installation othe top strap.

Child restraint anchor points are designed to withstand only those loadimposed by correctly fitted child restraints. Under no circumstances arthey to be used for adult seat belts oharnesses.

APD0107

2-27


53/183


54/183

TILTING STEERING WHEEL OUTSIDE MIRROR REMOTECONTROL

OUTSIDE MIRRORS


55/183

Tilt operation

Push the lock lever down and adjust the

steering wheel up or down to the desiredposition.

Pull the lock lever up firmly to lock thesteering wheel in place.

WARNING

Do not adjust the steering wheel whiledriving.

The outside mirror remote control will onlyoperate when the ignition switch is in theACC or ON position.

Push the right or left end of the switch toselect the right or left outside mirror, andthen adjust using the control lever.

Objects viewed in the outside mirror onthe passenger side are closer than theyappear.

The driver and passenger outside mirrorare foldable. Push the outside mirror bacward to fold it.

PD1028 PD1322 AIC050

2-30

INSIDE MIRROR VANITY MIRROR(If so equipped)


56/183

The night position will reduce glare from theheadlights of vehicles behind you at night.

CAUTIONUse the night position only when nec-essary, because it reduces rear viewclarity.

Your vehicle may be equipped with a driverand passenger vanity mirrors. To access,pull the sun visor down and flip open the

mirror cover. Some vanity mirrors are illumi-nated and turn on when the mirror cover isopened.

PD1006M APD0510

2-31


57/183

3 Heater, air conditioner and audio system


58/183

Ventilators............................................................. 3-2

Heater and air conditioner (manual) .................... 3-2

Air flow charts....................................................... 3-6

Heater and air conditioner (automatic)

(If so equipped) .................................................... 3-8

Radio .................................................................. 3-10

Clock-radio ......................................................... 3-10

AM-FM radio with cassette player ..................... 3-11

AM-FM radio with cassette player and

compact disc player ........................................... 3-16

Antenna .............................................................. 3-21CB radio or car phone........................................ 3-22

VENTILATORS HEATER AND AIR CONDITIONER (MANUAL)


59/183

Open or close (side vents only), and adjustthe air flow direction of ventilators.

CONTROLS

Fan control dial

This dial turns the fan on and off, andcontrols fan speed. 1 is low, 4 is high.

Air flow control buttons

These buttons allow you to select the aflow outlets.

Air flows from center and sid

ventilators.

HA1073

AHA003

3-2

Air flows from center and side WARNING HEATER OPERATION


60/183

Air flows from center and sideventilators and foot outlets.

Air flows mainly from foot outlets.

Air flows from defroster outletsand foot outlets.

Air flows mainly from defrosteroutlets.

Temperature control lever

This lever allows you to adjust the tempera-ture of the outlet air.

Air recirculation button

OFF position:

Outside air is drawn into the passenger

compartment and distributed through theselected outlet.

Use this position for normal heater or airconditioning operation.

ON position (Indicator light on):

Interior air is recirculated inside the vehicle.

Push the air recirculation button to the ONposition when driving on a dusty road or toavoid traffic fumes and for maximum coolingwhen using the air conditioning.

WARNING

Do not use the recirculation mode forlong periods as it may cause the inte-rior air to become stale and the win-dows to fog up.

Air conditioning button(If so equipped)

This button is provided only on vehiclesequipped with air conditioning.

Start the engine, move the fan control dial tothe desired (1 to 4) position and push theA/C button to turn on the air conditioning.The indicator light will come on when the airconditioning is on. To stop the air condition-ing, push the switch again to return it to itsoriginal position.

The air conditioning cooling function op-erates only when the engine is running.

WARNING

Positioning of the heating or air condi-tioning controls should not be donewhile driving, in order that full attentionmay be given to the driving operation.

HEATER OPERATION

Heating

This mode is used to direct heated air fromthe floor outlets. Some air will also comfrom the defrost vents.

1. Push the air recirculation button to thOFF position for normal heating.

2. Push the button in.

3. Move the fan control dial to the desireposition.

4. Move the temperature control lever to thdesired position between the middle anthe HOT position.

VentilationThis mode directs outside air from the sidand center vents.

1. Push the air recirculation button to thOFF position.



4. Move the temperature control lever to thdesired position.

3-3

Defrosting or defogging Bi-level heating Operating tips


61/183

Defrosting or defogging

This mode is used to defrost/defog thewindows.

1. Push the air recirculation button to theOFF position.

2. Push the button in.3. Move the fan control dial to the desired

position.

4. Move the temperature control lever to thedesired position between the middle andthe HOT position.

To quickly remove ice or fog from thewindows, turn on the fan control dial to4 and the temperature control lever to

the full HOT position. When the switch is pushed, the

air conditioning will automatically beturned on to defog the windshield, andthe air recirculation mode will automati-cally be turned off.

Outside air is drawn into the passengercompartment to improve the defoggingperformance.

Bi level heating

This mode directs cooler air from the sideand center vents and warmer air from thefloor outlets.



3. Move the fan control dial to the desiredposition.

4. Move the temperature control lever to thedesired position.

Heating and defogging

This mode heats the interior and defogs thewindshield.




4. Move the temperature control lever to thedesired position between the middle andthe HOT position.

Operating tips

Clear snow and ice from the wipeblades and air inlet in front of thwindshield. This will improve heateoperation.

When the or switch selected, the air recirculation mode wautomatically be turned off.

Outside air is drawn into the passengecompartment to improve the defogginperformance.

AIR CONDITIONER OPERATION

Start the engine, move the fan control dial tthe desired (1 to 4) position and push in th

A/C button to activate the air conditioningWhen the air conditioning is on, cooling andehumidifying functions will be added to thheater operation.

WARNING

The air conditioning cooling functionoperates only when the engine is running.

3-4

Cooling The air conditioning system should be 1. Push the air recirculation button to th


62/183

Cooling

This mode is used to cool and dehumidify.




4. Push on the air conditioning button. Theindicator light will come on.


For quick cooling when the outside tem-perature is high, push the air recirculationbutton to the ON position. Be sure to

return the air recirculation button to theOFF position for normal cooling.

Operating tips

Keep the windows and sun roof closedwhile the air conditioning is in operation.

After parking in the sun, drive for two orthree minutes with the windows open tovent hot air from the passenger compart-ment. Then, close the windows. This willallow the air conditioning to cool theinterior more quickly.

g yoperated for about ten minutes atleast once a month. This helps pre-vent damage to the system due to lackof lubrication.

If the coolant temperature gauge ex-

ceeds the HOT position, turn the airconditioning off. See If your vehicleoverheats in the In case of emergencysection for additional information.

Dehumidified heating

This mode is used to heat and dehumidify.


2. Push the button in.3. Move the fan control dial to the desired

position.

4. Push on the air conditioning button. Theindicator light will come on.


Dehumidified defogging

This mode is used to defog the windowsand dehumidify.

OFF position.



4. Push the air conditioning button. Thindicator light will come on.

5. Move the temperature control lever to thdesired position.

When the button is pushed, thair conditioning will automatically bturned on to defog the windshield, anthe air recirculation mode will automatcally be turned off.

Outside air is drawn into the passengecompartment to improve the defogging peformance.

AIR FLOW CHARTS

The charts on the following pages show thswitch and lever positions for MAXIMUand QUICK heating, cooling, or defrosting

3-5


63/183

AHA052

3-6


64/183

AHA052

3-7

The temperature of the passenger comill b i i d

HEATER AND AIR CONDITIONER (AUTOMATIC)(If so equipped)


65/183

Controls

Start the engine and operate the controls to

activate the climate control system.

WARNING

The air conditioning cooling function op-erates only when the engine is running.

Cooling and/or dehumidified heat-ing (Auto mode)

This mode may be used throughout the yearas the system automatically works to main-tain the customer-selected temperature. Air

flow distribution and fan speed are alsocontrolled automatically.

USA models will display set temperaturein F. Canadian models will display settemperature in C.

1. Push the AUTO switch on. AUTO willbe displayed as well as the previouslyselected temperature in the passengercompartment.

2. Push the temperature set button or to set the desired temperature.

Adjust the temperature set button toabout 75F (24C) for normal operation.

partment will be maintained automatcally. Air flow distribution and fan speeare also controlled automatically.

Heating (ECON mode)

The ECON (economy) mode provides cmate control without activating the air conditioning. When only heating of the passenger compartment is desired, use this mode

1. Push the ECON switch on. ECON wbe displayed.

2. Push the temperature set button o to set the desired temperature.

The temperature of the passenger compartment will be maintained as selecte

by the temperature set button. Air flodistribution and fan speed are also controlled automatically in an effort to reacthe desired termperature.

Do not select a temperature setting lowethan the outside air temperature. Due tthe absence of air conditioning operatioit is possible that the selected interiotemperature may not be achieved.

ECON mode is not recommended if windows are fogging up. If the window

AHA0523

3-8

begin to fog up while using the ECONd th d tli d i

Manual fan speed control Air flows from center and sid


66/183

mode, use the procedures outlined inDehumified defogging.

Dehumidified defogging

1. Push the DEF switch on. The indicatorlight will come on.

2. Push the temperature set button or to set the desired temperature.

To quickly remove ice or fog from theoutside of the windows, push the manualfan control switch and set to themaximum position .

As soon as possible after the windshieldis clean, push the AUTO switch to return

to the auto mode. When the DEF switch is pushed, the air

conditioning will automatically be turnedon at outside temperatures above 35F(2C) to defog the windshield, and the airrecirculate mode will automatically beturned off.

Outside air is drawn into the passengercompartment to improve the defoggingperformance.

Push the fan control switch to manu-ally control the fan speed. Each fan speed isindicated by the shading of a fan blade onthe display. For example, indicatesthat the fan is operating at low speed and

indicates that the fan is operating atmedium-high speed.

Push the AUTO switch to return to auto-matic control of the fan speed.

Air recirculation switch

Push the air recirculation switch to recircu-late interior air inside the vehicle. The indi-cator light will come on.

Push it again to draw outside air into thepassenger compartment. The indicator willgo out.

The air recirculation mode will not be andcannot be activated when the DEF modehas been selected.

Manual air flow control

Pushing the manual air flow control switchselects the air outlet.

ventilators.

Air flows from center and sidventilators and foot outlets.

Air flows mainly from foot outlet

Air flows from defroster outleand foot outlets.

Air flows mainly from defrostoutlets.

To turn the system off

Push the OFF switch.

Operating tips

When the engine coolant temperatur

and outside air temperature are low, thair flow from the foot outlets may noperate for a maximum of 150 secondsHowever, this is not a malfunction. Aftethe coolant temperature warms up, thair flow from the foot outlets will operatnormally.

3-9

Servicing air conditioning To turn the radio on, turn the ignition key tACC or ON If you listen to the radio wit

RADIO


67/183

The sensor on the instrument panel helpsmaintain a constant temperature; do not putanything on or around this sensor.

The air conditioning system in your NISSANvehicle is charged with a new refrigerantdesigned with the environment in mind.

This new refrigerant will not harm theearths ozone layer.

Special charging equipment and lubricant isrequired when servicing your NISSAN airconditioner. Using improper refrigerants orlubricants will cause severe damage to yourair conditioning system. See Air condition-ing system refrigerant and lubricant recom-mendations in the Technical and con-sumer information section of this manual.

Your NISSAN dealer will be able to serviceyour environmentally conscious air condi-tioning system.

ACC or ON . If you listen to the radio witthe engine not running, turn the key to thACC position.

Radio reception is affected by station signastrength, distance from radio transmittebuildings, bridges, mountains and other external influences. Intermittent changes reception quality normally are caused bthese external influences.

CLOCK-RADIO (If so equipped)

On vehicles equipped with an AM-FM radand cassette player, a clock is integrateinto the audio system. For further detailrefer to Clock Operation later in this section

AHA0501

3-10

AM-FM RADIO WITH CASSETTEPLAYER


68/183

PLAYER

Radio operation

Push the ON-OFF/VOL knob to turn thradio on. Push the ON-OFF/VOL knob onc

more to turn the radio off.Turn the knob to adjust the volume.

Inserting a cassette tape into the cassettplayer while the radio is on will turn the radoff and turn the cassette player on.

Pushing the ON-OFF/VOL knob while thcassette tape is playing will turn off thcassette player.

Clock Operation

By pressing the CLOCK button, you caalternate the clock and the radio/cassettape options in the display.

Clock Set

Depressing the CLOCK and the buttons together will set hours. Depressinthe CLOCK and buttons togethewill set minutes.

AHA0524

3-11

Clock Priority Mode WARNING


69/183

In this mode the clock will be shown in thedisplay. If any radio or cassette tape func-tions are activated, the radio (or cassettetape) display will illuminate for ten secondsthen return to the clock mode.

NOTE:After clock adjustment, the radio is in theclock priority mode.

Radio/Cassette Tape Priority Mode

In this mode, the radio station will illuminatein the display during radio operation. Duringcassette tape operation, TAPE will illumi-nate in the display.

Selecting the desired band

Push the band select button (FM/AM) tochange from AM to FM reception.

The stereo indicator will glow during FMstereo reception. When the stereo broadcastsignal is weak, the radio will automaticallychange from stereo to monaural reception.

Tuning

The radio should not be tuned whiledriving in order that full attention maybe given to the driving operation.

Manual tuning

Push down either manual tuning or button.

SEEK tuning

Push the SEEK/SCAN tuning button for less than 1.5 seconds. SEEK tuning be-gins from low to high frequencies and stopsat the next broadcasting station. Once thehighest broadcasting station is reached, theradio will continue in the SEEK mode at the

lowest broadcast station. Pushing the buttonagain will continue the SEEK function.

SCAN tuning

Push the SEEK/SCAN tuning button for more than 1.5 seconds. SCAN will illu-minate in the display window. SCAN tuningbegins from low to high frequencies andstops at each broadcasting station for fiveseconds. Pushing the button again during thisfive second period will stop SCAN tuning and

the radio will remain tuned to that station.

Station memory operations

Six stations can be set for each band.

1. Tune to the desired station.

2. Push the desired select button for mor

AHA052

3-12

than 2 seconds. For example, in thediagram ch2 is to be memorized. The


70/183

diagram ch2 is to be memorized. Theradio mutes when the select button ispushed.

3. The indicator ch2 will then come onand the sound will resume. Memorizing isnow complete.

4. Other select buttons can be set in thesame manner.

If the battery cable is disconnected, or if thefuse blows, the radio memory will be can-celled. In that case, reset the desired sta-tions.

Adjusting tone quality and speakerbalance

To adjust BASS, TREB (treble), FADER,and BAL (balance) the control knobs mustbe released from their stowed positions.Pushing the knobs once moves them to thereleased position.

In the released position, the knobs controltone quality. Turn the control knobs to adjustBASS and TREB to the most pleasing level.

From the released position, the knobs mustbe pulled out in order to control FADER and

BAL. FADER adjusts the sound level be-

tween the front and rear speakers, and BAadjusts the sound level between the rigand left speakers.

Once sound quality is set to the desirelevels, return the control knobs to thstowed position by pushing them in completely and releasing.

Cassette tape operation

Turn the ignition key to ACC or ON, thecarefully insert the cassette tape into thtape door.

The cassette tape will automatically pull int

the player. The word TAPE and an arro

AHA0522

3-13

indicating tape side will illuminate in thedisplay window.

the labe

The Inside Pages of This Manual Contain

Documents

Transcript of The Inside Pages of This Manual Contain