PTPv2 PTPv2.1* Grand Master

RS232/422/485 USB interface

NTP SNTP STRATUM 1 Server

SNMP v3 v2 MIB2 RADIUS

CRYPTO MD5 RSA DSA SSL

REMOTE HTTP HTTPS SSH

IEC61850 Smart Grid

* extra feature requiring additional hardware and/or software firmware upgrade

ANTENNA w/ 2x GNSS rcv*

CLOCK* ePRTC* PRTC* PRC*

MiFID II Financial Market

Chrony 100% compatible

IEE1588 hardware T-stamps

REDUNDANT Power supply*

www.elpromatime.com

REF OUTPUT PPS PPM PPH

NTS-5000 Rb+OCXO

IRIG-B AM DCLS (TTL, RS422)*

NTP/PTP IEEE1588 Modular Time Server

SyncE Master* ITU-I G.8261*

8x LAN 1GE via SFP & RJ45

HOLDOVER Rubidium & OCXO

TELECOM 5G ePRTC ready*

The Industry 4.0 generation

SNMP (v2 v3) MIB 2 RADIUS HTTP HTTPS SSH TELNET

Elproma Elektronika Sp. z ooul. Szymanowskiego 13PL 05-092 Lomianki, POLAND +48 227517680 +48 227517681

Elproma Electronics B.V.Nijendal 42NL 3972KC Driebergen +31 343518724 +31 343512286

Tel: Fax:

Tel: Fax:

E-MAIL: info@elpromatime.comwww.elpromatime.com

LAN1-LAN2 (always included) 100Base-T RJ45 with software timestamping < 200us LAN3-LAN10 Expander 1-4 1000Base-T RJ45/SFP hardware timestamping < 50nsNetwork Time Protocol (NTP) LAN1-LAN2 rfc5905-5909, rfc1305 accuracy < 200usSimple Network Time Protocol (SNTP) LAN1-LAN10 rfc4330, rfc2030 < 1msPrecision Time Protocol v2 (PTPd) LAN1-LAN2 IEEE1588:2008 < 200usPrecision Time Protocol v2 (PTPv2) LAN3-LAN10 IEEE1588:2008 < 50nsPTPv2 profiles on LAN3-LAN10 default telecom power/power utility IEC61850 TELECOM ITU-I G.8265.1 ITU-I G.8275.1 ITU-I G.8275.2 SyncE ITU-I G.8262* ITU-I G.8261* White Rabbit* POWER IEEE C37.238 IEC61850-3-9 (via IEC C37.238)IEEE1588 master mode Expander #1, Expander #2, Expander #3, Expander #4 IEEE1588 slave mode Expander #1, Expander #2 /not supported Expanders #3 #4/Expander #1 card 2x LAN only (master or slave)Expander #2 card 2x LAN only (master or slave)Expander #3 card 2x LAN (master) or 4x relay ALARM (GNSS, PWR-A, PWR-B, SYNC)Expander #4 card 2x LAN (master) or 4x rs422 IRIG-B DCLS or 2.048kHz BNC 75OhmExpander #5 card vertical 2x FO (ST) IRIG-B DCLS (ST) & 2x IRIG-B AM TTL BNC 50OhmGNSS Receiver #1 (ANT1 RJ45 rs485) refer to NTS-antenna brochure (1pcs. included) GNSS Receiver #2* (ANT2 RJ45 rs485) refer to NTS-antenna brochure (not included)Remote configuration PTPv2.1 IEEE1588:2019 Experimental* (contact factory)Mechanical/environmental

Std. NTS-5000 w/ std. power 110-230VAC (120-370 VDC)

Max. network 10x LAN con�guration Expanders 1-4

4x rs422 IRIG-B DCLS, 2x IRIG-B AM TTL , 2x FO IRIG -B DCLS

8x LAN , 4x 2.048 MHz 75Ohm

Size: 484 x 300 x 88,8mm (rackʼ19 2U) Power: 20- 70 VDC (max 2A) - dual redundant* 110-230 VAC (max 1A) - dual redundant 120-370 VDC (max 1A) - dual redundantOperating temperature: 0°C to +60°C Humidity: up to 95%Storage temperature: -40°C to +80°C Humidity: up to 95%

Expander #1 Expander #2 Expander #3 Expander #4 Expander #5

The NTS-5000 is Rubidium holdover Stratum-1 NTP time server and PTP IEEE15888 grandmaster. The NTS-5000 LITE includes OCXO only.Both can appoint ePRTC*, PRTC*, PRC* clock class standards. NTS-5000 can optionally support SyncE*. Device has been designed to ensure cybersecurity and it is dedicated for synchronization of critical infrastructures: Financials markets, Smart grid and Telecom.

The GNSS is a std. primary ref. source of UTC. Max. of 2x independent NTS-antenna devices can support single NTS-5000 server. This ensure hardware redundancy and robust synchronization by reducing risk of efficiency of jamming and spoofing attacks.

The factory defaults minimum server configuration includes: LAN1-LAN2 (RJ45 100Base-T), ANT-1/ANT-2 (RJ45 rs485 w/ PPS)PPS-out (BNC 50 Ohm), PPS-in (BNC 50 Ohm), IRIG-out AM (BNC 50 Ohm), IRIG-in (BNC 50 Ohm), 10MHz-out (BNC 50 Ohm),2x USB 2.0 (Type-A 5V), 2x rs232 (D-SUB9m), 1x rs232 (D-SUB9f), 1x POWER (C14 w/ rocker; 110-230 VAC & 120-370 VDC ), Holdover: OCXO (NTS-5000 & NTS-5000LITE), Rubidium* (NTS-5000 only). Built-in protocols: NTP, SNTP, PTPv2, IRIG-B, SYSPLEX.

The high accuracy synchronization and hardware timestamping arrives with optional new Expander 1-5 interfaces. The maximum configuration can include extra 8x GE (RJ45, SFP) interfaces, IRIG-B DCLS (rs422, TTL, Fiber Optic ST), Relay ALARM and 2048MHz.

1GE LAN3-LAN4 1GE LAN5-LAN6 1GE LAN7-LAN8 1GE LAN9-LAN10 IRIG-B AM DCLS (master & slave) (master & slave) (master only) (master only) (master only) RJ45, SFP RJ45, SFP RJ45, SFP RJ45, SFP 2xBNC, 2xST(FO)

4x RELAY ALARM 4x IRIG-B DCLS 2.048 kHz/T1/E1** (PWR A/B SYNC GNSS) (120Ohm on/off) (50/75/75 Ohm)

Synchronization performance and cyber-security are ensured by new concept of autonomous operating Network Cards (NIC). They base on IEEE1588 embedded 2x2cm module supporting private IP-stack to each NIC inside Expanders #1-4. The high accuracyhardware timestamps are supported from FPGA. The chip is controlled by real-time operating system. Expanders 1-4 are 100% infor-mation isolated from each other (no internal TCP/IP connectivity). Server NTS-5000 is distributing analogue signals 1PPS/10Mhz, ToDto each of 1-4 NIC individually. Thanks to this technology networks can not interfere each other ensuring robust synchronization. Single NIC, OCXO or Rubidium failure does not give impact to other network interface cards since they all operate fully autonomously.

Technical Specification Accuracy

Made in Poland (EU)* extra feature requiring additional hardware