The Finger Scraper - Infinity...
Transcript of The Finger Scraper - Infinity...
Unit #107-951 Boulder Boulevard, Stony Plain, Alberta T7Z 0E7Email: [email protected] | Phone: (780)963-3084 | Fax: (780)963-3214
www.infinitybelting.com
belting ltd
The Finger ScraperBy Infinity Belting ltd.
Safe
Effective
Adaptable
low maintenance
1. No ridged pinch points
2. No damage to conveyer belts even without maintenance 3. Cleans cleated and non-cleated belts Including hot vulcanized splices or mechanical fasteners
4. Can be hooded for dust collection
5. Urethane fingers flick and scrape Cleans as well or better than conventional scrapers6. Easy installation and conversion Lightweight aluminum body, minimal parts, easy to adjust
7. Easily inspected from the ground Without lifts or production stoppage
8. Auto-aligns to conveyer belts Auto adapts to changing belt conditions
Unit #107-951 Boulder Boulevard, Stony Plain, Alberta T7Z 0E7Email: [email protected] | Phone: (780)963-3084 | Fax: (780)963-3214
www.infinitybelting.com
belting ltd
The Finger ScraperBy Infinity Belting ltd.
InfinityFinger ScraperIndustry First Features
TraditionalScraper
The Finger Scraper by Infinity Belting Ltd for cleated, non cleated, and textured conveyor belting has been specifically designed to replace conventional bristle brush cleaners that are prone to material build up between the bristles that cause the bristles to clog and eventually become unable to turn freely, resulting in the bristles breaking off and thereby eliminating the brushes effectiveness.
The Finger Scraper is light and compact and is driven by the conveyor belt. It has dual rows of high durometer urethane fingers that effectively clean the surface of the cleated/textured belt by their patented “flicking” motion. The Finger Scraper is in service in Aggregate, Pulp & Paper, Power Generation and Recycling facilities, and has performed beyond our client partners’ expectations, in all weather conditions.
When conventional brushes fail, give carry-back THE FINGER SCRAPER.
Features & Benefits
Conveying Excellence
Self Tensioningno springs or weights
Auto-aligns instantly to belt profile at startup
Can be used on flat and profiled belts
Can be used with mechanical fasteners
Can be hooded for dust control
Primary and secondary scraper on one unit
Ridged pinch points
Will damage belt if not maintained
High belt and scraper wear on startup of new blade