The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir...
Transcript of The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir...
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
1/15
mailto:[email protected] -
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
2/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
3/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
4/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
5/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
6/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
7/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
8/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
9/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
10/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
11/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
12/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
13/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
14/15
-
8/10/2019 The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024 T3 Aluminium Friction Stir Welds
15/15