The design process. The brief The design and manufacture of a new generation of biometric access...
-
Upload
catherine-delphia-kennedy -
Category
Documents
-
view
217 -
download
4
Transcript of The design process. The brief The design and manufacture of a new generation of biometric access...
The design process
The brief
The design and manufacture of a new generation of biometric access control
systems with the ability to distribute and integrate into new and existing card access control systems supplied by
existing and leading UK and EU manufactures.
Objectives of brief
•Minimalistic in design and aesthetically pleasing•Vandal resistant and IP rated to IP65•Easy to use •Easy to install and operate•Good ergonomic design
Brief – Core requirements
The current solutions are:
•The biometric readers are too large and expensive for large scale installations
•Many have design defects which mean they cannot be located externally as they are neither weather or vandal proof
•Have poor compatibility and robustness when delivered to the UK and European markets.
Competitive products
Competitive products
Product Benefits:
•Ability to integrate to existing systems in the market place•Fit for purpose for the required environment•Aesthetically designed to meet customer demands•IP rated•Vandal resistant•Minimalistic•Scalable•Networkable•Lower cost to market•Market specific software•Harsh environment reader•One to one and one to many matching
USP’s of proposed ievo reader
•Law enforcement•Military•State & Municipal Government•Other National Government•Financial Services•Gaming and Hospitality•Health care•Telecoms•Industrial Manufacturing•Retail•Transportation•Education/ Pre-School Education•Construction
The Biometric Security industry reported over $3 Billion in sales 2007 and is forecasted to rise to just under $7.5 billion
in 2012
The market
Sketch concepts & ideas
Sketch concepts & ideas
Sketch concepts & ideas
Sketch concepts & ideas
Then onto foam models
Final design drawings
Final design drawings
Final design drawings
Final design drawings
The Journey & the problems
Be prepared for mistakes to be made along the way
You will change your design again & again & again…..
Make sure you have a close relationship with you design house
Invest money in SLA’s and prototype units
Have a time scale and then add to it!
Have an initial budget and contingency budget
The ievo reader
The ievo reader
The ievo reader