The checklist for preparing your Exchange 2007 infrastructure for Exchange 2013 coexistence | 9#23
-
Upload
o365infocom -
Category
Documents
-
view
213 -
download
0
description
Transcript of The checklist for preparing your Exchange 2007 infrastructure for Exchange 2013 coexistence | 9#23
Page 1 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
THE CHECKLIST FOR PREPARING YOUR
EXCHANGE 2007 INFRASTRUCTURE FOR
EXCHANGE 2013 COEXISTENCE | 9#23
In the current article, I would like to review the subject of the required preparation
that we will need to implement in the Exchange CAS 2007 environment before or
while we are moving to the “new” Exchange 2013 coexistence environment.
In this article, we will briefly review the different “parts” that we will need to relate
to when implementing Exchange 2013/2007 coexistence environment and review in
more details the specific updates that relate to the legacy namespace that we need
to configure the different Exchange CAS 2007 services.
Page 2 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Legacy namespace and the required
preparations
The implementation of the legacy namespace in Exchange 2013/2007 coexistence
requires us to make the necessary preparations such as different network
infrastructures.
The required preparations for the Exchange 2013/2007 coexistence environment,
are not considered as “rocket science” bat, on the other hand, in case that we are
not aware of the required preparation and for the specific setting of the different
“parts” the project of the Exchange 2013/2007 coexistence environment could be
safer from severe problems.
Page 3 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
To be able to successfully assimilate the “new legacy namespace” in the Exchange
infrastructure, we will need to implement the following steps:
1. DNS infrastructure – we will need to add the host name: legacy to the internal +
external DNS infrastructure. In the internal DNS infrastructure, the host name
legacy will be “mapped” to the internal\private IP address of the Exchange CAS
2007 server and, in the In the external DNS infrastructure; the host names
legacy, will be “mapped” to the public IP address of the Public facing Exchange
2007 CAS server.
2. Public certificate infrastructure – We will need to add the
FQDN: legacy.mail.o365info.com to the public certificate that is used by the
Exchange infrastructure.
3. Exchange CAS 2007 infrastructure – we will need to update the internal +
external URL address of the Exchange CAS 2007.
4. Firewall infrastructure – we will need to add new incoming rules that will enable
external Exchange 2007 clients to access the Public facing Exchange 2007 CAS
server.
Page 4 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Just a quick quote from a Microsoft article:
“In order to support external client coexistence with CAS2007 and legacy Exchange
in your “Internet Facing AD Site”, you will (potentially) need to acquire a new
commercial certificate. As a best practice, Microsoft recommends utilizing a
certificate that supports Subject Alternative Names; however, you can utilize a
wildcard certificate as well.
This commercial certificate that will be leveraged by external clients will contain at a
minimum three SAN value (note that other scenarios may require you to add
additional values):
mail.contoso.com (your primary OWA/EAS/OA accesses URL)
autodiscover.contoso.com
legacy.contoso.com (your OWA/EAS namespace for legacy mailbox access)”
Page 5 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
[Source of information: Transitioning from an Exchange 2007 environment to
Exchange 2007]
Exchange namespace and DNS infrastructure
In the following diagram, we can see an example to the “re point” concept. Before
the implementation of the Exchange 2013/2007 coexistence environment, the
public DNS records of the Autodiscover and the Public facing Exchange CAS server
host name were pointing to the Exchange 2007 CAS.
Page 6 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
After the implementation of the Exchange 2013/2007 coexistence environment, the
public DNS records of the Autodiscover and the Public facing Exchange CAS server
host name will point to the Exchange 2013 CAS.
Additionally, we will need to add a new record to the existing DNS infrastructure:
the legacy namespace record.
In our scenario, the legacy namespace that will point to the Exchange CAS 2007 is:
legacy.mail.o365info.com
In a Split DNS infrastructure, the updates of the DNS records will need to be
implemented for the Internal DNS infrastructure and the External DNS
infrastructure,
Page 7 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
In the following diagram, we can see an example of the required DNS configuration
settings.
Exchange 2013/2007 coexistence environment
– Internal Autodiscover infrastructure
considerations
Based on the assumption of our scenario, in which the Exchange 2007 Autodiscover
namespace infrastructure was based on the concept of Joint\contiguous
namespace, for example: autodiscover.o365info.com, we will need to verify the
implementation of the following requirements.
Page 8 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
DNS Infrastructure – verify that the internal\external DNS infrastructure will be
updated by “mapping” the Autodiscover record to the IP address of the Exchange
2013.
Verify that the Exchange 2013 CAS will be registered at the Active Directory SCP
using the host name: autodiscover.o365info.com
In the following diagram, we can see the implementation of the internal
Autodiscover infrastructure in an Exchange 2007 environment.
1. Exchange 2007 client query Active Directory for the name of the Autodiscover
Endpoint and the answer is: autodiscover.o365info.com
2. The Exchange 2007 client query DNS for the IP address of the
host: autodiscover.o365info.com and the “DNS answer” include the IP address of
the Exchange 2007 CAS.
Page 9 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
In the following diagram, we can see the implementation of the internal
Autodiscover infrastructure in Exchange 2013/2007 coexistence environment.
1. Exchange 2007 client query Active Directory for the name of the Autodiscover
Endpoint and the answer is: autodiscover.o365info.com
2. The Exchange 2007 client query DNS for the IP address of the
host: autodiscover.o365info.com and the “DNS answer” include the IP address of
the Exchange 2013 server.
3. The Exchange 2007 client will address the Exchange 2013 CAS, and the Exchange
CAS server will proxy the request to the Exchange 2013 mailbox server.
Page 10 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Public certificate and the subject of legacy
namespace
In the former section, we mentioned that we would need to create a new legacy
namespace and in the DNS infrastructure points this record to the Exchange CAS
2007.
In most the mail client protocol connectivity flow, Exchange 2007 client will try to
verify the identity of the Exchange CAS 2007 but checking his public certificate.
For this reason, we will need to Purchase a new public certificate or update an
existing public certificate to include the legacy namespace. In our
scenario: legacy.mail.o365info.com
In the following screenshot, we can see an example of a public SAN certificate that
included the legacy namespace host name: legacy.o365info.com
Page 11 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Other considerations
When implementing an Exchange 2013 coexistence environment, there are many
other additional elements and consideration that need to be “included” in the
preparation checklist. It’s recommend to read the detailed description that appear
in the Exchange Server Deployment Assistant
Page 12 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Just a little taste of the additional requirements could be:
DNS infrastructure and MX records
In a scenario of Exchange 2013 coexistence environment, we will need to point to
MX records to the “new Exchange 2013 CAS” that will be configured as the Public
facing Exchange CAS server instead of the former Exchange 2007 CAS.
Firewall infrastructure
We will need to update the Firewall rule that relates to the mail infrastructure
was pointed to the IP address of the Exchange 2007 server to the “new IP
address” of the Exchange 2013 server.
Exchange CAS 2007 legacy namespace | Basic
concepts
Before we start from the description of the “checklist” list” of the required update in
the Exchange 2007 environment, let’s briefly review the concept of the legacy name.
In our scenario, the legacy name whom we choose for “representing” the Exchange
2007 infrastructure will be: legacy.mail.o365info.com
The host name: legacy.mail.o365info.com will be mapped to the IP address of the
Exchange CAS 2007 server.
When we say that: “we need to update the Exchange CAS 2007 URL address” the
meaning is: replacing the host name part of the Exchange CAS 2007 URL address
that is allocated for the different Exchange CAS 2007 services.
The new legacy namespace that we update is related to the part of the FQDN from
the URL address of a specific Exchange web service. In other words: we don’t
Page 13 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
change or update that “structure” of the Exchange CAS 2007 URL address but only
the server name.
For example: in case that the URL address of OWA mail services was:
https://mail.o365info.com/owa
We will update the URL address to use the “new
FQDN”: legacy.mail.o365info.com and the “new URL address” will
be: https://legacy.mail.o365info.com/owa
Implementing required updates of legacy
namespace in Exchange 2007 infrastructure
We can classify the required updates that we will need to implement in the
Exchange 2007 infrastructure into two major groups:
1. Legacy namespace updates – updates in which we will “replace” existing
Exchange CAS 2007 hosts names that was used up until now, with the “new host
name” meaning the legacy namespace.
2. “Pointing” Exchange 2007 services to the Exchange CAS 2013 infrastructure – this
part relates to additional services: Autodiscover Endpoint name and Outlook
Anywhere – external host name (RPC Endpoint name).
Before the implementation of the Exchange 2013/2007 coexistence
environment, these services was “represented” by the Exchange CAS 2007
infrastructure. When we add the Exchange CAS 2013 to the existing Exchange
2007 infrastructure, these specific services should be “pointed” to the Exchange
CAS 2013 instead of the Exchange CAS 2007.
Page 14 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Updating the Exchange 2007 URL address to
use the legacy namespace
We can divide the required updates in the Exchange CAS 2007 infrastructure, into
three “sections”:
1. The Exchange CAS 2007 services that relate to providing Exchange CAS
2007 access to their mailboxes
In the section, we include three different Exchange CAS 2007 services that are used
by three different mail clients:
Exchange 2007 OWA clients – we will need to update the internal + the external
OWA URL address to use the legacy namespace.
Exchange 2007 ActiveSync clients – external Exchange 2007 ActiveSync will be
served by the Exchange CAS 2013. For this reason we need to set the external
URL address to “empty”.
Regarding the internal ActiveSync URL, we will need to set the URL address to use
the legacy namespace.
Exchange 2007 Outlook clients – in case that the Exchange CAS 2007 support
Outlook Anywhere services, we can leave the value of the “external host name”
as it is because the value is based on the primary namespace. In case that the
Page 15 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Exchange CAS 2007 didn’t include support for Outlook Anywhere services, we will
need to enable the Outlook Anywhere services and for the value of the “external
host name” use the host name who will be “mapped” to the Exchange CAS 2013
server.
2. Exchange CAS 2007 – Exchange web service
As mention before, in Exchange 2013/2007 coexistence environment, the element
that provides Exchange web service to the Exchange 2007 clients is the Exchange
CAS 2007.
The process in which Exchange 2007 clients are “informed” about the URL address
of their Exchange web services, is implemented as part of the Autodiscover process.
The ability of the Exchange CAS 2013 to provide Exchange 2007 client information
about the “legacy Exchange CAS 2007 infrastructure” is implemented by using the
legacy namespace.
For this reason, we will need to update the Exchange CAS 2007, Exchange, web
service value of the internal + the external URL address to use the legacy
namespace.
Page 16 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
3. Exchange CAS 2007 | internal Autodiscover Endpoint name
By default, each of the existing Exchange CAS servers, “register” himself at the
Active Directory SCP. In a “pre Exchange 2013 coexistence environment” the
Exchange CAS 2007 is registered in the Active Directory SCP as an “Autodiscover
Endpoint”.
In an Exchange 2013/2007 coexistence environment, we need to change the default
Autodiscover infrastructure and make sure that the only source for Autodiscover
infrastructure will be the Exchange CAS 2013.
Scenario 1: in case that the Autodiscover infrastructure is based upon a concept of
the identical host name (FQDN) for the Autodiscover Endpoint name such as:
autodiscover.o365info.com, there is no need to use an update procedure because
the update will be implemented via the DNS infrastructure. The update will be
implemented by using the IP address of the Exchange CAS 2013 instead of the
former setting, which was based on the IP address of the Exchange CAS 2007.
Scenario 2: in a scenario of “non-identical Autodiscover Endpoint names” in which
the internal Exchange server registered in the Active Directory SCP by using an
internal name,
For this reason, we will need to implement a procedure in which each of the legacy
Exchange CAS server will “re-register” himself at the Active Directory SCP but now,
using the host name of the Exchange CAS 2013.
Page 17 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
The Exchange CAS 2007 services URL address
and Host name matrix
To be able to successfully manage all the required updates that need to be
implemented in the Exchange CAS 2007 infrastructure, we can use the following
table as a “checklist.” list”.
Updating the Exchange 2007 services
The general guideline or concept is the in Exchange 2013/2007 coexistence
environment the Exchange CAS 2013 inherits the primary namespace such
as: mail.o365info.com
The legacy namespace will be ”attached” to the different Exchange CAS 2007
services and regarding other services such as: Outlook Anywhere and the internal
Active Directory address, Exchange 2007 client will use the “primary namespace”
that is “mapped” to the Exchange CAS 2013.
In our scenario, the legacy namespace that was chosen for the Exchange CAS 2007
infrastructure is: legacy.mail.o365info.com
OWA We will update the internal + external OWA URL address to use
the legacy namespace.In our scenario, the Exchange 2007 OWA
URL will be:https://legacy.mail.o365info.com/owa
ActiveSync We will update the internal ActiveSync URL address to use the
legacy namespace.In our scenario, the Exchange 2007 ActiveSync
Page 18 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
internal URL will be:https://legacy.mail.o365info.com/Microsoft-
Server-ActiveSync
Exchange
web service
We will update the internal + external Exchange web service URL
address to use the legacy namespace.In our scenario, the
Exchange 2007 OWA URL will
be:https://legacy.mail.o365info.com/EWS/Exchange.asmx
Outlook Anywhere service
With required setting that relates to Outlook Anywhere service, that we will need to
implement in the Exchange 2007 infrastructure are as follows:
1. External host name
Page 19 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Verify if the Exchange CAS 2007 supports the Outlook Anywhere services.
Case 1: in case that the Exchange CAS 2007 support Outlook Anywhere services, we
will need to update the authentication protocol setting (in the next section – xxx we
will relate to the authentication protocol setting).
Case 2: in case that the Exchange CAS 2007 doesn’t support Outlook Anywhere
services, we will need to enable the Outlook Anywhere services, and for the value of
the external host name choose the host name who is “used by Exchange CAS 2013”.
For example, in our scenario, we will configure the external host name
as: mail.o365info.com
External host name
Outlook
Anywhere
We will need to verify that the value of the external host name
uses the primary namespace. In our scenario, the external host
name is: mail.o365info.com
2. External client authentication protocol
We will need to verify that the value of the “External client authentication” sets of
basic.
3. IIS authentication method
We will need to configure the value of the:” IIS authentication method“ to: basic and
NTLM
Page 20 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Autodiscover service internal URI.
In Exchange 2013/2007 coexistence environment, the internal (and the external)
Autodiscover services should point to the Exchange CAS 2013.
Case 1: in case that the Exchange CAS 2007 was configured to use a standard
Autodiscover namespace, such as: autodiscover.o365info.com, there is no need to
implement any updates.
Case 2: in case that the Exchange CAS 2007 was configured to use an internal name
as the Autodiscover name, we will need to update this information to point to the
Exchange CAS 2013 Autodiscover internal name.
Page 21 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Using PowerShell for updating the Exchange
CAS 2007 URL address
Technically, we can use the Exchange CAS 2007 GUI interface for updating some of
the URL address such as the OWA URL address but other URL addresses such as
the URL address of Exchange web services can be updated only by using
PowerShell.
To be able to simplify the update operation, we can use a simple PowerShell script
which includes two variables: the Exchange CAS 2007 server name + the legacy
namespace.
After we update these variables, we apply the legacy namespace to all the required
Exchange CAS 2007 URL addresses.
Set the Exchange CAS 2007 services.
Page 22 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
In our example, we will set the following Exchange CAS 2007 services:
OWA
ActiveSync
Exchange web service
The updates will include the legacy namespace that we have chosen for our legacy
Exchange 2007 infrastructure. In our scenario, the legacy namespace
is: legacy.mail.o365info.com
The Exchange CAS 2007 server name in our scenario is: CAS2007
In the following diagram, we can see that syntax of the PowerShell syntax that we
will need to use
Page 23 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
1. Set the Exchange 2007 OWA URL address
The PowerShell command that we use for setting the OWA URL address to use the
legacy namespace is:
PowerShell
Set-OwaVirtualDirectory "CAS2007\owa (Default Web Site)" -Ex
ternalUrl https://legacy.mail.o365info.com/owa -InternalUrl
https://legacy.mail.o365info.com/owa
The PowerShell command that we use for viewing the setting of the OWA URL
address is:
PowerShell
Get-OwaVirtualDirectory -Identity "CAS2007\owa (default Web site)" | FL identity, internalUrl, ExternalUrl
2. Set the Exchange 2007 ActiveSync URL address
The PowerShell command that we use for setting the ActiveSync URL address to
use the legacy namespace is:
PowerShell
Page 24 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
Get-ActiveSyncVirtualDirectory -Server CAS2007 | Set-ActiveSyncVirtualDirectory -InternalURL "https://legacy.mail.o365info.com/Microso
ft-Server-ActiveSync" -ExternalURL $null
The PowerShell command that we use for viewing the setting of the ActiveSync URL
address is:
PowerShell
Get-ActiveSyncVirtualDirectory -server CAS2007 | FL identity, internalUrl, ExternalUrl
3. Set the Exchange 2007 Exchange web service URL address
The PowerShell command that we use for setting, the Exchange web service URL
address to use the legacy namespace is:
PowerShell
Get-WebServicesVirtualDirectory -Server CAS2007 | Set-WebServicesVirtualDirectory -InternalURL "https://legacy.mail.o365info.com/EWS/E
xchange.asmx" -ExternalURL "https://legacy.mail.o365info.com/EWS/Ex
change.asmx"
The PowerShell command that we use for viewing the setting of the Exchange web
service URL address is:
PowerShell
Get-WebServicesVirtualDirectory -server CAS2007 | FL identity, internalUrl, ExternalUrl
Manage and update the Exchange 2007 – Outlook Anywhere settings.
In Exchange 2013/2007 coexistence environment, Exchange 2007 client Outlook
client will address the Exchange CAS 2013 and the Exchange CAS 2013 will proxy
the communication request to the Exchange CAS 2007.
To be able to “CAS to CAS” communication, we will need to set the value of
theIISAuthenticationMethods to: NTLM and basic authentication
Additionally, set the ClientAuthenticationMethod to: basic
Page 25 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
The PowerShell command that we use for setting
the IISAuthenticationMethods authentication to use NTLM and basic is:
PowerShell
Set-OutlookAnywhere -Identity "CAS2007\Rpc (Default Web Site)" -IISAuthenticationMethods NTLM,Basic
The PowerShell command that we use for setting
the ClientAuthenticationMethod authentication to use basic is:
PowerShell
Set-OutlookAnywhere -Identity "CAS2007\Rpc (Default Web Site)" -ClientAuthenticationMethod:Basic
The PowerShell command that we use for viewing the setting of the Outlook
Anywhere settings is:
PowerShell
Get-OutlookAnywhere -Server CAS2007
Update the Exchange 2007 Autodiscover Endpoint name registration
in the Active Directory SCP
Page 26 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
In case that the Exchange CAS 2007 was registered at the Active Directory SCP using
an “internal name”, we will need to update the existing value of the Autodiscover
Endpoint to point the Exchange CAS 2013 Autodiscover Endpoint name.
The syntax of the PowerShell that we will us for updating and viewing the value of
theAutoDiscoverServiceInternalUri is:
In our scenario the Exchange CAS 2013 Autodiscover Endpoint
is: autodiscover.o365info.com
PowerShell
Set-ClientAccessServer -Identity "CAS2007" -AutoDiscoverServiceInternalUri "https://autodiscover.o365info.com/autodiscover/autodiscove
r.xml"
The PowerShell command that we use for viewing the setting of
theAutoDiscoverServiceInternalUri URL address is:
PowerShell
Get-ClientAccessServer -Identity CAS2007 | FL identity,AutodiscoverServiceInternalUri
Additional reading
Upgrade from Exchange 2007 to Exchange 2013
Checklist: Upgrade from Exchange 2007
Install Exchange 2013 in an Existing Exchange 2007 Organization
Page 27 of 27 | Part 09#23 | The checklist for preparing your Exchange 2007 infrastructure
for Exchange 2013 coexistence
Written by Eyal Doron | o365info.com | Copyright © 2012-2015
OWA,EWS configuration in Exchange 2013/2007 coexistence
2013 – 2007 coexistence issue
Part 2: Step-by-Step Exchange 2007 to 2013 Migration
Exchange 2007/2013 CoExistence URLs
Planning and migrating a small organization from Exchange 2007 to 2013 (Part
14)
Client Connectivity in an Exchange 2013 Coexistence Environment
OWA,EWS configuration in Exchange 2013/2007 coexistence
Part 1: Step-by-Step Exchange 2007 to 2013 Migration
Upgrade from Exchange 2007 to Exchange 2013
Exchange 2013 Client Access server configuration
Exchange 2007/2013 CoExistence URLs
Script for collecting information about existing Exchange infrastructure
Generate Exchange Environment Reports using Powershell
Exchange Email Organization Report (Get-CorpEmailReport)
The Exchange 2013 coexistence article series index page