The Bungee Jump: potential energy at work AiS Challenge Summer Teacher Institute 2002 Richard Allen
-
Upload
crystal-harper -
Category
Documents
-
view
218 -
download
0
Transcript of The Bungee Jump: potential energy at work AiS Challenge Summer Teacher Institute 2002 Richard Allen
The Bungee Jump: potential energy at work
AiS ChallengeSummer Teacher Institute
2002Richard Allen
Bungee Jumping: a short history
The origin of bungee jumping is quite recent, and probably related to the centuries-old, ritualistic practices of the "land divers" of Pentecost Island in the S Pacific.
In rites of passage, young men jump hundreds of feet, protected only by tree vines attached to their ankles
A Short History
Modern Bungee jumping began with a four-man team from the Oxford Univ. Dangerous Sports Club jumping off the Clifton Suspension Bridge in Bristol, England, on April 1, 1979 dressed in their customary top hat and tails
A Short History
During the late 1980's A.J. Hackett opened up the first commercial jump site in New Zealand and to publicize his site, per-formed an astounding bungee jump from the Eiffel Tower!
Sport flourished in New Zealand and France during 1980s and brought to US by John and Peter Kockelman of CA in late 1980s.
A Short History
In 1990s facilities sprang up all over the US with cranes, towers, and hot-air balloons as jumping platforms.
Thousands have now experienced the “ultimate adrenaline rush”.
The virtual Bungee jumper
L (cord free length)
d (cord stretch length)
*
Schematic depiction of a jumper having fallen a jump height, L + d.
Bungee Jump Geometry
Potential Energy
Potential energy is the energy an object has stored as a result of its position, relative to a zero or equilibrium position.
The principle physics components of bungee jumping are the gravitational potential energy of the bungee jumper and the elastic potential energy of the bungee cord.
Examples: Potential Energy
Gravitational Potential Energy
An object has gravitational potential energy if it is positioned at a height above its zero height position: PEgrav = m*g*h.
If the fall length of the bungee jumper is L + d, the bungee jumper has gravitational potential energy,
PEgrav = m*g*(L + d)
Treating the Bungee Cord as a Linear Spring
Springs can store elastic potential energy resulting from compression or stretching.
A spring is called a linear spring if the amount of force, F, required to compress or stretch it a distance x is proportional to x: F = k*x where k is the spring stiffness
Such springs are said to obey Hooke’s Law
Elastic Potential Energy
An object has elastic potential energy if it’s in a non-equilibrium position on an elastic medium
For a bungee cord with restoring force, F = k*x, the bungee jumper, at the cords limiting stretch d, has elastic potential energy,
PEelas = {[F(0) + F(d)]/2}*d
= {[0 + k*d] /2}*d = k*d2/2
Conservation of Energy
From energy considerations, the gravitational potential energy of the jumper in the initial state (height L + D) is equal the elastic potential energy of the cord in the final state (bottom of the jump) where the jumper’s velocity is 0:
m*g*(L + d) = k*d2/2
Gravitational potential energy at the top of the jump has been converted to elastic potential energy at the bottom of the jump.
Equations for d and k
When a given cord (k, L) is matched with a given person (m), the cord’s stretch length (d) is determined by:
d = mg/k + [m2g2/k2 + 2m*g*L/k]1/2.
When a given jump height (L + d) is matched with a given person (m), the cord’s stiffness (k) is determined by:
k = 2(m*g)*[(L + d)/d2].
Example: a firm bungee ride
Suppose a jumper weighing 70 kg (686 N,154 lbs) jumps using a 9m cord that stretches 18m. Then
k = 2(m * g) * [(L + d)/d2] = 2 * (7 0 * 9.8) *(27/182) = 114.3 N/m (7.8 lbs/ft)
The maximum force, F = k*x, exerted on the jumper occurs when x = d:
Fmax = 114.3 N/m * 18 m = 2057.4 N (461.2 lbs),
This produces a force 3 times the jumper weight:
2057.4N/686N ~ 3.0 g’s
Example: a “softer” bungee ride
If the 9m cord stretches 27m (3 times its original length), its stiffness is
k = 2*(70*9.8)*(36/272) = 67.8 N/m (4.6 lbs/ft)
producing a maximum force of Fmax = (67.8 N/ m)*(27 m) = 1830.6 N (411.5 lbs)
This produces a force 2.7 times the jumpers weight,
1830.6 N/686 N ~ 2.7 g’s,
and a “softer” ride.
Extensions
Incorporate variable stiffness in the bungee cord; in practice, cords generally do not behave like linear springs over their entire range of use.
Add a static line to the bungee cord: customize jump height to the individual.
Develop a mathematical model for jumpers position and speed as functions of time; incorporate drag.
Work To Stretch a Piecewise Linear Spring
Evaluation
In designing a safe bungee cord facility, what issues must be addressed and why?
Formulate a hypothesis about the weight of the jumper compared to the stretch of the cord as the jumper’s weight increases. Design an experiment to test your hypothesis.
Reference URLs
Constructivism and the Five E'shttp://www.miamisci.org/ph/lpintro5e.html
Physics Teacher article on bungee jumping http://www.bungee.com/press&more/press/pt.html
Hooke’s Law appletwww.sciencejoywagon.com/physicszone/lesson/
02forces/hookeslaw.htm
Reference URLs
Jumper’s weight vs stretch experimenthttp://www.uvm.edu/vsta/sample11.html
Ultimate adrenalin rush moviehttp://www-scf.usc.edu/~operchuc/bungy.htm
Potential energy exampleswww.glenbrook.k12.il.us/gbssci/phys/Class/
energy/u5l1b.htm