Thats wat i get
-
Upload
hansraj-akil -
Category
Documents
-
view
213 -
download
0
Transcript of Thats wat i get
8/11/2019 Thats wat i get
http://slidepdf.com/reader/full/thats-wat-i-get 1/2
ANSI – Does not produce standards by itself. It has every standard on lightning protection on its website.
http://webstore.ansi.org/FindStandards.aspx?SearchString=Lightning&SearchOption=1&DeptID=&PageNum=2&Search
TermsArray=Lightning%7cnull%7cnull#recordfound
It has IEEE 998, EN 62305 NFPA 780 standards available to buy.
European standard committee (EN)
Develops standards. Has developed EN63205 and it has four parts
http://standards.cen.eu/dyn/www/f?p=204:105:0 :::::
The International Electrotechnical Commission (IEC) is a body responsible for implementing international standards. Its
technical committees are comprised of representatives from various member national standards, where each country is
entitled to one vote during the process of creation and issuing the standard. The
standards generally have an IEC prefix to their number (CEI for
French versions). IEC standards are produced in English and French
languages. For most countries the adoption of these standards is
voluntary, and often selected content of the standard is absorbed
and introduced as improvements to that country’s own standard.Also, within Europe, there exists the European Committee
for Electrotechnical Standardisation (CENELEC). The member
countries currently include Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom. IEC and CENELEC
generally work in parallel, and CENELEC members vote to adopt
new IEC standards as CENELEC standards. The committees of
CENELEC may choose to make some alterations to the IEC version.Additionally, CENELEC produce their own standards to which
IEC have no counterpart. CENELEC documents are produced in
English, French and German and an approved CENELEC standard
will have an EN prefix (or NE in the French language versions).
The important fact with CENELEC standards is that by rule the
member countries are bound to adopt all CENELEC standards as
national standards. In the process of adopting these standards,
minimum changes are permitted. In-country clauses (exceptions
or changes) can only be made under very strict circumstances.
When such standards are adopted at the national level, any
conflicting national standard must be withdrawn (an overlap
period is permitted).
For the EN IEC 62305 series of lightning protection standards,
each member country has introduced these at a national level by
November 2006 and has withdrawn any conflicting standards by February 2009.At each level (International, European,
National) a different naming prefix convention is used For example:
• IEC 62305-1 (IEC version)
• EN 62305-1 (CENELEC adopted copy of the above)
• BS EN 62305-1 (British National Standard adoption of
the above)