T&G Flooring Technical Data KC/QUAL/DOC/0024 - 18/04/11 · Technical Data KC/QUAL/DOC/0024 -...
Transcript of T&G Flooring Technical Data KC/QUAL/DOC/0024 - 18/04/11 · Technical Data KC/QUAL/DOC/0024 -...
T&G Flooring
Technical Data
Kronofloor T&G flooring is suitable for a wide range of flooring applications including
floating and joisted floors.
Kronofloor is available in grade P5 with a tongue and groove profile on all four sides, P5 is available in two thickness’
18mm and 22mm.
KC/QUAL/DOC/0024 - 18/04/11
KRONOFLOOR - GENERAL PROPERTIES:
Thickness (sanded) EN 324-1 mm +/ - 0.3
Length & width EN 324-1 mm ± 2
Squareness tolerance EN 324-2 mm/m 2
Formaldehyde Class E1 EN 120 mg/100g 8≤
Moisture Content EN 322 % 5 to 13
PROPERTY TEST METHOD UNIT SPECIFICATION (EN 312)
Page 1 of 2
EN 323 kg/m2 >15 1 layer of 22mm P5
EN 323 kg/m2 >25 2 layers of 18mm P5
PROPERTY APPLICATION TEST METHOD UNIT REQUIREMENT
Sound
Insulation
Internal joisted floors,
within a single house
Internal joisted floors,
between apartments
KRONOFLOOR ACHIEVES THE REQUIREMENTS OF THE CONSTRUCTION PRODUCTS DIRECTIVE 89/106/EC
TO COMPLY WITH THE BUILDING
REGULATIONS PART E, USE:
KRONOSPAN T&G FLOORING SIZES:
18, 22mm
THICKNESS Size
2400 x 600
T&G PROFILE
For full fitting instructions please refer to theworking with guidelines in packs or atwww.kronospan.co.uk
Kronofloor
Technical Data KC/QUAL/DOC/0024 - 14/12/10
Page 2 of 2
KRONOFLOOR SPECIFIC PROPERTIES:
KRONOFLOOR ACHIEVES THE REQUIREMENTS OF THE CONSTRUCTION PRODUCTS DIRECTIVE 89/106/EC
Internal Bond
Swelling in thickness, 24hr
Bending Strength
MOE
IB after Cyclic test
Swelling in thickness after Cyclic test
PROPERTY TEST METHOD UNIT P5 18MM P5 22MM
EN 319
EN 317
EN 310
EN 310
EN 321
EN 321
N/mm²
N/mm²
N/mm²
N/mm²
%
%
0.45
10
2400
0.22
16
12
0.4
10
2150
0.20
11
14
Kronofloor P5
TYPE MM NORMAL USE MAX UDL PROFILE
18
Domestic
1.4
2.7
450
400
2400 x 600
GENERAL PROPERTIES
KN/m²MAX CL
KNMAXIMUM
JOIST SPACINGSTYLE DIMENSIONS BOARDS/
PACK
Domestic
Non-Domestic22
1.5TG4SEF
METIMP
862440 x 1220 40
1.52.5
1.4 600 TG4
TG4
SEF
SEF
METIMP
2400 x 6002440 x 1220
7032