TFT-LCD Monitor - ADM · PDF fileFor TNC 155, 335, 332, 355 Heidenhain special timing ......
Transcript of TFT-LCD Monitor - ADM · PDF fileFor TNC 155, 335, 332, 355 Heidenhain special timing ......
The TFT-Industrial-Monitor is a modern concept to replace old or defective 9” and 12” CRTs mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
JUL16_Rev.1.8 - page 1/8 - Subject to change without prior notice and any misprints!
8.4” TFT monitor BE110 / 110B / 111 / 135 (replacement for 9”CRT) 23611462363191 10.4” TFT monitor BE132B (replacement for 12”CRT / CNC 234)
Order-no.:
For TNC 131, 135, 145, 145C, 150, 151,
CNC 234
Heidenhain special timing
mech. type: Front plate (2361146),
Chassis with curve (2363191)
front plate / curve with antireflex coated glass
Connector monitor: 15-pin D-Sub (2rows)
Connector adapter cable: Centronics 24-pin (2361146)
Input voltage: 12V DC (via video cable)
TFT-Display, diagonal 8.4”LED / 10.4”
Resolution: 800 x 600
Brightness: min. 250 cd/m²
Contrast: min. 400:1
Backlight lifetime: ca. 30.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
2361146 / 8.4” LED / Front plate 280 x 190 mm - Connection via adapter cable
2363191 / 10.4”LCD
Replacement TFT-LCD Monitor
The TFT-Industrial-Monitor is a modern concept to replace old or defective 12” CRT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
JUL16_Rev.1.8 - page 2/8 - Subject to change without prior notice and any misprints!
12.1” TFT monitor BE132B (replacement for 12”CRT / CNC 232) 23611562362184 12.1” TFT monitor BE211 / 211B / 211F 2361149 12.1” TFT monitor BE311 / 311B / 311F
Order-no.:
For TNC 135, 150B, 150Q, 151B, 151Q, 223,
MAHO CNC 132, 223, 232, 322
Heidenhain special timing
mech. type: Front plate
Front plate with antireflex coated glass
Connector monitor: 15-pin D-Sub (2rows)
Connector adapter cable: 10-pin (2361156) / Centronics
24-pin (2362184 / 2361149)
Input voltage: 12V DC (via video cable)
TFT-Display, diagonal 12.1”
Resolution: 800 x 600
Brightness: 400 cd/m²
Contrast: 500:1
Backlight lifetime: ca. 50.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
2361156 / Front plate 385 x 275 mm - Connection via adapter cable: 10-pin
2362184 / Front plate 350 x 274 mm 2361149 / Front plate 386 x 275 mm- Connection via adapter cable: 24-pin Centronics
Replacement TFT-LCD Monitor
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
JUL16_Rev.1.8 - page 3/8 - Subject to change without prior notice and any misprints!
12.1” TFT monitor BE212 / 212B / 212F 23615592362171 12.1” TFT monitor BE512
Order-no.:
2361559 / Front plate 350 x 274 mm 2362171 / Front plate 400 x 308 mm
The TFT-Industrial-Monitor is a modern concept to replace old or defective 12” CRT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
For TNC 246, 306, 335, 351, 355, 360, 2500,
2500B, MAHO CNC 223, 234, 322
Heidenhain special timing
mech. type: Front plate 350 x 274 mm (2361559),
Front plate 400 x 380 mm (2362171)
Front plate with antireflex coated glass
Connector monitor: 15-pin D-Sub (2rows)
Input voltage: 12V DC (via video cable)
TFT-Display, diagonal 12.1”
Resolution: 800 x 600
Brightness: 400 cd/m²
Contrast: 500:1
Backlight lifetime: ca. 50.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
Replacement TFT-LCD Monitor
The TFT-Industrial-Monitor is a modern concept to replace old or defective 12” CRT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
12.1” TFT monitor BE411 / 411B / 411F 2361147 2361148 12.1” TFT monitor BE412 / 412B / 412F
2361157 12.1” TFT monitor BE511
Order-no.:
2361147 / Front plate 350 x 274 mm- Connection via adapter cable: 9-pin D-Sub
JUL16_Rev.1.8 - page 4/8 - Subject to change without prior notice and any misprints!
For TNC 155, 335, 332, 355
Heidenhain special timing
mech. type: Front plate
Front plate with antireflex coated glass
Connector monitor: 15-pin D-Sub (2rows)
Connector adapter cable: 9-pin D-Sub (2361147)
Input voltage: 85-240V AC
TFT-Display, diagonal 12.1”
Resolution: 800 x 600
Brightness: 400 cd/m²
Contrast: 500:1
Backlight lifetime ca. 50.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
2361148 / Front plate 350 x 274 mm 2361157 / Front plate 400 x 308 mm
Replacement TFT-LCD Monitor
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
Order-no.:
The TFT-Industrial-Monitor is a modern concept to replace old or defective 14” CRT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
2361150 2361557 12.1” TFT monitor BC 110 / 110B / 110BF - Front plate
12.1” TFT monitor BC 110 / 110B
2361557 / Front plate 400 x 320 mm- Connector keyboard: 9-pin D-Sub (2rows)
For TNC 406, 407, 415, 425, 426 C/P
Heidenhain special timing
mech. type: Chassis with curve (2361150),
Front plate with integrated keys (2361557)
Curve / front plate with antireflex coated glass
Connector monitor: 15-pin D-Sub (2rows)
Connector keyboard: via adapter cable (2361557)
Input voltage: 85-240V AC
TFT-Display, diagonal 12.1”
Resolution: 800 x 600
Brightness: 400 cd/m²
Contrast: 500:1
Backlight lifetime ca. 50.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
JUL16_Rev.1.8 - page 5/8 - Subject to change without prior notice and any misprints!
2361150 / Chassis with curve and angles
Replacement TFT-LCD Monitor
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
Order-no.:2361477
For TNC 407, 410, 410 M, 410 C/P, 416, 426, 426 M,
426 PB, 430, 430 PB, Mill Plus
Heidenhain special timing
mech. type: Front plate with integrated keys 400 x 305 mm
Curve / front plate with antireflex coated glass
Connector monitor: 15-pin HD D-Sub
Connector keyboard: via adapter cable
Input voltage: 85-240V AC
TFT-Display, diagonal 15.1”
Resolution: 1024 x 768
Brightness: 300 cd/m²
Contrast: 400:1
Backlight lifetime ca. 40.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
JUL16_Rev.1.8 - page 6/8 - Subject to change without prior notice and any misprints!
15.1” TFT monitor BC 120 / BC 120F / BC 125
Replacement TFT-LCD Monitor
Series: Heidenhain
The TFT-Industrial-Monitor is a modern concept to replace old or defective 15” CRTs and 15” TFTs mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Adapter cable keyboard(9-pin D-Sub (2rows) → IDC connector 10-pin)
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
For iTNC530
mech. type: Front plate with integrated keys
Front plate with antireflex coated glass
Connector monitor: 44-pin HD D-Sub
Connector keyboard: via adapter cable
Input voltage: 24V DC
TFT-Display, diagonal 15”LED
Resolution: 1024 x 768
Brightness: 400 cd/m²
Contrast: 700:1
Backlight lifetime ca. 50.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
The TFT-Industrial-Monitor is a modern concept to replace old or defective 15” TFT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Order-no.:236372915” TFT monitor BF 150 / BF 150M
Adapter cable keyboard(9-pin D-Sub (2rows) → IDC connector 10-pin)
JUL16_Rev.1.8 - page 7/8 - Subject to change without prior notice and any misprints!
Replacement TFT-LCD Monitor
Series: Heidenhain
Tel. +49(0)8104-62963-0Fax +49(0)8104-62963-22
E-Mail: [email protected]: www.adm-electronic.de
ADM electronic GmbH Mühlweg 2, 82054 Sauerlach
For TNC 410, 410M, 416, 426, 426M, 430M
mech. type: Chassis (2363048)
Front plate with integrated keys (2363691)
Front plate with antireflex coated glass
Connector monitor: 62-pin HD D-Sub
Connector keyboard: 9-pin D-Sub (2363691)
Input voltage: 24V DC
TFT-Display, diagonal 10.4”
Resolution: 640 x 480
Brightness: 450 cd/m²
Contrast: 600:1
Backlight lifetime ca. 40.000 h
VDE 0100, 0411, 0804, 0871B and CE-Mark
The TFT-Industrial-Monitor is a modern concept to replace old or defective 10.4” TFT monitors mounted in control units of Heidenhain. All units are Made in Germany, using only high quality components. A mechanic housing, similar to the original unit, makes it easy to exchange in just a few minutes.
Order-no.:2363048 2363691 10.4” TFT monitor BF 120 / BF 129 - Front plate
10.4” TFT monitor BF 120 / BF 129 - Conversion set
JUL16_Rev.1.8 - page 8/8 - Subject to change without prior notice and any misprints!
2363691 / Front plate 400.5 x 264.4 mm- Connector keyboard: 9-pin D-Sub (2rows)
2363048 / Chassis
Replacement TFT-LCD Monitor