8/2/2019 tf_85_series

1/3

Moser Baer a-Si Thin Film Solar PV Modules

Product Datasheet For MBTF 85 Series

Moser Baer Thin Film Solar Modules are manufactured in a state of the art, fully automated line. The frameless

Glass-PVB-Glass modules are available in 1300x1100 mm2 configuration offering a range of power outputs

available for customer applications. These modules are ideal for large grid-connected photovoltaic and roof top

systems and provide excellent performance.

Technology

Single junction Amorphous Silicon (a-Si)Technology based modules

Monolithic cell to cell serial connection enabledvia laser technology

Manufactured using Applied Materials SunfabProduction Line

Product Features

The MTBF 85 series modules are available fromstabilized power of 76W to >88W in various 2 W

incremental bin sizes.

Frameless Glass-PVB-Glass modules with highlytranslucent soda lime glass

Modules available with the option of bondedback rails

Made from non-toxic materials and are easilyrecyclable

Performance

Moser Baer Thin Film Modules

Deliver stabilized power enabled by a highefficiency CVD process

Offer robust performance under a diverse set ofclimatic conditions

o Better performance under diffuse (low)light and indirect sunlight conditions

relative to C-Si modules.

o Generation of higher power relative toC-Si modules at higher temperatures

Dimensions of 1300 x 1100 mm2

size Module

8/2/2019 tf_85_series

2/3

Cross Section of a-Si Thin Film Module (thickness

not to scale)

Quality

High quality, reliable modules 100% inspection for mechanical and visual

defects with continued monitoring of electrical

performance

Six Sigma practices used in manufacturing line Certified for IEC 61646, IEC 61730. UL 1703 certification underway ISO 9001 certification underway

Warranty

Defect free material and workmanship with 5year limited warranty.

Performance guaranteeo 10 years at 90% of minimum stabilized

rated output power

o 25 years at 80% of minimum stabilizedrated output power

Typical Initial IV Characteristics (before and after

degradation) of a Quarter size module measured at AM

1.5 and 25C Cell Temp

Mechanical Data Units Column1

Dimension (L x W) mm 1300 x 1100

Surface Area m2

1.43

Thickness* mm 7.5

Weight ** kg 25 (55 lb)* Without Junction Box

** Without rails

Temperature Coefficient Units A

Maximum power % / C -0.2

Open Circuit Voltage % / C -0.33

Short Circuit Current % / C 0.09

Maximum Power Voltage % / C -0.32

Maximum Power Current % / C 0.14

Operating temperature range: -40C to +85

C

8/2/2019 tf_85_series

3/3

Units Bin > 88W Bin 86 W Bin 84 W Bin 82 W Bin 80 W Bin

Maximum Power ( Initial / Stablized** )

W >(106/88) (103/86)+2 (101/84)+2 (98/82)+2 (96/80)+2 (94

Power Output Tolerance % +/- 5 % +/- 5 % +/- 5 % +/- 5 % +/- 5 % +/-

Open Circuit Voltage, Voc V 95.7/93.8 95.2/93.3 94.4/92.5 93.5/91.7 92.7/90.9 91

Short Circuit Current, Isc A 1.6/1.5 1.56/1.43 1.52/1.4 1.48/1.36 1.5/1.37 1.4

Maximum Power Voltage, Vmp V 77.07/74.1 75.19/72.3 77.77/74.8 77.433/74.5 74.9/72.01 72

Maximum Power Current, Imp A 1.38/1.11 1.40/1.13 1.31/1.05 1.28/1.03 1.28/1.03 1.3

Maximum System Voltage V 1000 1000 1000 1000 1000 10

* At Standard Test Conditions ( STC ) 25 degree C , A.M 1.5 & Irradiance 1000 W / m2

** Stabilized power is 16.5 % lower than initial