» High quality materials of construction and exceptional engineering with tight tolerances reduces wear, maintenance, and downtime.

» Modular, open, hygienic design for easy cleaning. » High capacity bearings with increased pressure capability meet aggressive demands. » Gear motors eliminate belt slippage for continuous performance » All material contact components made from Food Grade Stainless Steel.

Robust, Reliable, & Easy To Maintain

» Adhesives & Sealants » Biomass materials » Carbon & Coal » Catalysts » Ceramics » Chemicals

» Feedstock » Food » Grains » Inorganic materials » Laboratory » Pharmaceutical

» Pet Food & Treats » Purification & Filtration » Recycling » Rubber » Silicone » Waxes

Common Applications & Materials (melting not required)

The Diamond America TF600 Cold Feed Extruders provide high performance that can deliver up to 122,000 in3/hr. The TF600 features a large six-inch diameter barrel screw, simple controls, improved serviceability and twin counter-rotating packing screws to keep material moving into the system. Its optional mobile cart allows the TF600 to be positioned wherever needed for use and an open, maintenance-friendly design ensures maximum uptime.

TF600 6” TWIN FEED EXTRUDER

TF600

TF60017‐4 Stainless Steel Extruder available in models from 4:1 – 16:1 length over diameter.

330-535-3330 info@daextrusion.comdaextrusion.com96 East Miller Avenue, Akron, OH 44301

Features & Benefits

© Diamond America 2021 | DA-TF600-0221

1 TT100 / SF100 / TF100 do not have barrel liners, jacketed hopper, or serpentine flow circuit. Barrels are jacketed for fluid circulation/temperature control.

Technical Data

DA Extruder

Screw Diameter

Packing Screws

Hopper Size

(inches)

Footprint (inches)

Max Volume (in3/hr)

Motor HP

RPM Max

Torque lbs./inch

Minimum Electrical

TF600 6" 2 12 x 16.25 48 x 95.81 x 79.44 122,000 60 / 75 47 81,200 240/480 / 3PH

Packing ScrewsCounter-Rotating Packing Screws provide a positive feed with a consistent flow of packed material, minimizing starvation and non-uniform extrudate. Packers allow one extruder to process a wider range of materials, eliminating added capital equipment cost.

ControllerCustom built controllers with bright, easy to read LED keypad and a speed reference potentiometer.

Extrusion BarrelAvailable with serpentine flow channels or open jacket for liquid heating or cooling, and without jacket for electric band heating. Barrels are available with smooth or grooved, hardened Stainless Steel liners, with or without mixing pins. Barrels can also be manufactured to accept pressure/temperature probes.

Hopper17‐4 Stainless Steel with a 12" X 16.25" opening. Hopper is also machined to accept liquid cooling or heating.

Gear MotorSEW‐Eurodrive, 60 or 75HP AC gear motor with 47 RPM top speed and 81,200 pounds of torque per inch.

Drive MotorNidec uni-drive AC drive motor with bright, easy to read LED keypad and speed reference potentiometer.

Extrusion Screw6" diameter extrusion screw made from 17‐4PH H1150 stainless steel, hard-faced flight O.D. for increased life. Screws are available slotted or continuous based on the type of material to be processed. Screw can also be bored for cooling or heating.

Dies CuttersPacking Screws