TETRA Repeaters to enhance the TETRA network coverage in outdoor locations

TETRA OUTDOOR COVERAGE

Outdoor coverage

Reliable and effective public safety communication is crucial

while managing critical and life threatening situations. The

TETRA network used by authorities worldwide is the lead-

ing technology to handle the public safety communication.

To ensure the perfect function of TETRA network also in

extreme environments that have weak TETRA coverage or

lacks the coverage totally, Creowave Oy provides smart

TETRA coverage solutions with high-class TETRA repeaters.

Creowave – Solutions for Extremes

Creowave TETRA Services

TETRA Outdoor Coverage is presented here with Creowave

TETRA repeater types suitable for the outdoor locations.

Typical outdoor installation locations:

Open outdoor areas where the base station signal does not

exist or the signal is weak.

• Landscape valleys • Mining areas

• Areas behind buildings etc.

The business area of Professional Radio provides a wide range of TETRA coverage solutions to enhance the TETRA network coverage worldwide. Creowave offers high-class TETRA repeaters for indoor and outdoor locations as well for tunnels and hazardous areas.

Coverage

Base station

R

Also TETRA Indoor Repeater can be placed to outdoor locations if specific premises for the repeater are

available.

TETRA REPEATERS FOR OUTDOOR LOCATIONS

TETRA HIGHPOWER REPEATER

TETRA HYBRID REPEATER

TETRA OUTDOOR REPEATER

TETRA Highpower Repeater is software defined repeater that

can be used as a band selective or channel selective or as a

combination between these modes. The repeater is high-pow-

ered enabling the solving of specific cases, e.g. large outdoor

areas, where a high RF output power is needed. Special features

of TETRA Highpower Repeater include e.g. time-slot based

ALC, spectrum analysis for the used TETRA band, equalization

of power levels between carriers. Also this repeater type can

be configured on site or remotely through Creowave Repeater

Manager Software.

TETRA Hybrid Repeater is a repeater that can be used as a band

selective or channel selective or as a combination between these

modes. The TETRA Hybrid Repeater can be supplied with LCD

touch screen that enables the updating of the repeater in the

field, reflecting the future radio channel allocations and con-

tinuous network development. Updates can be made e.g. for

channel selection and channel bandwidth. Special features of

TETRA Hybrid Repeater include e.g. time-slot based ALC, spec-

trum analysis for the used TETRA band, equalization of power levels

between carriers. Also this repeater type can be configured on

site or remotely through Creowave Repeater Manager Software.

TETRA Outdoor Repeater is a band selective TETRA repeater to

be placed in outdoor locations. It is robust reliable and robust

device ensuring and amplifying the connection between the

TETRA basestation and TETRA handheld device. The repeater

can be configured on site, or remotely through Creowave Re-

peater Manager Software.

Creowave TETRA Repeaters for outdoor environments are presented below. Repeaters can be used

in various combinations to build the best, most reasonable and cost-effective TETRA network

coverage to the site. Creowave Oy provides TETRA services from consultation, coverage planning

and installation to training to supply the comprehensive and turn-key coverage solution.

Creowave Oy is the leading company in providing Radio Frequency & Microwave Electronics solutions for extreme environ-ments. The company developes, produces and markets solutions on three business areas - Professional Radio, Radio Testing and Industrial Measurement. www.creowave.com

Creowave Oy Lentokatu 2, FI-90460 Oulunsalo, Finland Phone +358 10 83 26 300 Fax +358 40 88 29 465 E-mail sales@creowave.com

Creowave standard TETRA repeaters for Outdoor locations

©

Cre

owav

e 20

11. A

ll rig

hts

rese

rved

. Due

to c

ontin

uous

dev

elop

men

t all

spec

ifica

tions

sub

ject

to c

hang

e w

ithou

t prio

r writ

ten

notic

e.

TETRA Outdoor Repeaters Maximum Gain : 70 dB Maximum Output Power (with one carrier): +17 dBm

Frequency Bands Uplink / Downlink Options: Ethernet G A D CWR Type

380 MHz 380-385 MHz / 390 -395 MHz CWR 380 TO 2 385 MHz 385-390 MHz / 395 - 400 MHz CWR 385 TO 2 410 MHz 410-415 MHz / 420-425 MHz CWR 410 TO 2 412 MHz 412-417 MHz /422-427 MHz CWR 412 TO 2 415 MHz 415-420 MHz / 415-430 MHz CWR 415 TO 2 450 MHz 450-455 MHz / 460-465 MHz CWR 450 TO 2453 MHz 453-458 MHz / 463 -468 MHz CWR 453 T0 2 458 MHz 458-460 MHz / 468-470 MHz CWR 458 T0 2 NB

TETRA Hybrid Repeaters Maximum Gain : 85 dB Maximum Output Power (with one carrier): +17 dBm

Frequency Bands Uplink / Downlink Options: Ethernet G A D CWR Type

380 MHz 380-385 MHz / 390 -395 MHz CWR 380 TH 2385 MHz 385-390 MHz / 395 - 400 MHz CWR 385 TH 2 410 MHz 410-415 MHz / 420-425 MHz CWR 410 TH 2 415 MHz 415-420 MHz / 425-430 MHz CWR 415 TH 2 450 MHz 450-455 MHz / 460-465 MHz CWR 450 TH 2

TETRA Highpower Repeaters Maximum Gain : 85 dB Maximum Output Power (with one carrier): +36 dBm

Frequency Bands Uplink / Downlink Options: Ethernet G A D CWR Type

380 MHz 380-385 MHz / 390 -395 MHz CWR 380 HP 1 385 MHz 385-390 MHz / 395 - 400 MHz CWR 385 HP 1 410 MHz 410-415 MHz / 420-425 MHz CWR 410 HP 1 415 MHz 415-420 MHz / 425-430 MHz CWR 415 HP 1 450 MHz 450-455 MHz / 460-465 MHz CWR 450 HP 1 380 MHz 380-385 MHz / 390 -395 MHz CWR 380 HP 2 385 MHz 385-390 MHz / 395 - 400 MHz CWR 385 HP 2 410 MHz 410-415 MHz / 420-425 MHz CWR 410 HP 2 415 MHz 415-420 MHz / 425-430 MHz CWR 415 HP 2 450 MHz 450-455 MHz / 460-465 MHz CWR 450 HP 2 380 MHz 380-385 MHz / 390 -395 MHz CWR 380 HP 3 E385 MHz 385-390 MHz / 395 - 400 MHz CWR 385 HP 3 E410 MHz 410-415 MHz / 420-425 MHz CWR 410 HP 3 E415 MHz 415-420 MHz / 425-430 MHz CWR 415 HP 3 E450 MHz 450-455 MHz / 460-465 MHz CWR 450 HP 3 E

All repeaters compliant to TETRA / TEDS TS 101789-1 EN 303035-1

Option G = GSM Modem Option A = Integrated Internal Antenna Option D = Display NB = Narrow Band

HP1 = +27 dBm downlink / +17 dBm uplink HP2 = +36 dBm downlink / +17 dBm uplink HP3 = +36 dBm downlink / +27 dBm uplink