CABLE TRAYS LINEFalumsa s.c.r.lCalidad e Innovacin

C.L.

TECHNICAL SPECIFICATION

CABLE TRAY TYPE PERFORATED BPPZRGC(Cable Tray type Perforated, Tab Z reinforced Hot Dip Galvanized)

HOT LAMINATED PLATE (LAC)Description of Material:Flatproductobtainedbylaminatedsteelof slabspreviouslyheated to atemperature of 1250C.

Mechanical Properties:

Technical StandardFRAEquivalent Standard

Kg / mmKg / mm%

ASTM A-1011* CS-TYPE B..21/3425 minJIS G-3131 SPHC

* Replaces to the ASTM A-569 StandardA: Elongation F: Fluence Limit R: Tensile StrengthDESCRIPTION OF MANUFACTURING:Cable trays type ladder FALUMSA are manufacturing according to NEMA STANDARD VE-1, taking recommendations (NEC) NFPA-70. Process of manufacturing includes the design, line, punching, folding bridges, unions and laterals that make up the tray. The laterals ends with folding in C, V or Z. Are interconnected with bridges at the bottom by the process of spot welding or MIG MAG can also be riveted. The Cable trays type ladder provides maximum ventilation for the cables. For its manufacturingare used platesLAC -LAF.

Hot Dip Galvanized Description:After beingmanufactured, Cable Tray Type Ladder in LAC plate, go througha process of pickled, cleaningof all types ofimpuritiesand oxidationbefore beingsubjected toa pond ofmoltenzincon average of zinc adhesion,complying withASTMSTANDARD 123.

C.L.