Test_1_MEMB123_Sem_2_2009-2010

10
TEST1 MEMB123 Statics Q.1 Two forces F 1 and F 2 are applied at a point A in a body with the magnitude of 60 N and 45 N respectively as shown in Figure 1. Determine; i) The magnitude and the coordinate direction of the resultant of the two forces at point A. ii) The angle between forces F 1 and F 2 . 33 marks Figure 1 Q.2 Determine the force in each cable needed to support the 500 N load as shown in Figure 2 for equilibrium. 34 marks

Transcript of Test_1_MEMB123_Sem_2_2009-2010

Page 1: Test_1_MEMB123_Sem_2_2009-2010

TEST1 MEMB123 Statics

Q.1 Two forces F1 and F2 are applied at a point A in a body with the magnitude of

60 N and 45 N respectively as shown in Figure 1. Determine;

i) The magnitude and the coordinate direction of the resultant of the two

forces at point A.

ii) The angle between forces F1 and F2.

33 marks

Figure 1

Q.2 Determine the force in each cable needed to support the 500 N load as shown in

Figure 2 for equilibrium. 34 marks

Figure 2

Page 2: Test_1_MEMB123_Sem_2_2009-2010

Q.3 Determine the resultant moment about the flange O produced by the two forces in

Figure 3. Express the result as a Cartesian vector. 33 marks

Figure 3

Page 3: Test_1_MEMB123_Sem_2_2009-2010

Solution to test 1

Question 1

Page 4: Test_1_MEMB123_Sem_2_2009-2010

Question 2

Page 5: Test_1_MEMB123_Sem_2_2009-2010

Question 3

Page 6: Test_1_MEMB123_Sem_2_2009-2010
Page 7: Test_1_MEMB123_Sem_2_2009-2010

Q2

Page 8: Test_1_MEMB123_Sem_2_2009-2010

Q3

Page 9: Test_1_MEMB123_Sem_2_2009-2010