Test Results for Cisco Unified Communications System ... · Test Results for Cisco Unified...
Transcript of Test Results for Cisco Unified Communications System ... · Test Results for Cisco Unified...
Test Results for Cisco Unified Communications System Release 10.6Phase II for JapanFirst Published: March 20, 2015
Last Modified: March 20, 2015
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
© 2014 Cisco Systems, Inc. All rights reserved.
C O N T E N T S
C H A P T E R 1 Cisco Unified Communications System Test 1
Cisco Unified Communications System Test 1
Cisco Unified Communications System Test for Japan 2
Acronyms 3
C H A P T E R 2 Test Topology and Environment Matrix 9
Test Topology 10
Environment Matrix 11
Open Caveats 16
What's New? 17
C H A P T E R 3 Test Results Summary 19
Cisco TelePresence Video Communication Server 19
Cisco Jabber for iPhone and iPad 49
Cisco Jabber for Android 54
Cisco Jabber for Windows 56
Cisco Jabber for Mac 63
Cisco TelePresence Multipoint Control Unit 65
Cisco TelePresence Management Suite 69
Cisco TelePresence Conductor 73
Cisco TelePresence Server 76
Cisco Jabber Guest 80
Cisco Collaboration Expressway 84
Cisco IP Phone Validation 87
Cisco IP Phones 87
Cisco Prime Collaboration 100
Cisco Prime Collaboration Provisioning 100
Cisco Prime Collaboration Assurance 115
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan iii
Cisco Prime Collaboration Analytics 121
Cisco Unified Communication System Upgrade / Migration Test 127
Upgrade Paths 127
Upgrade 8.5.1 to 10.5.2 129
Upgrade 8.6.1 to 10.5.2 131
Upgrade 8.6.2 to 10.5.2 135
Related Documentation 138
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japaniv
Contents
C H A P T E R 1Cisco Unified Communications System Test
• Cisco Unified Communications System Test, page 1
• Cisco Unified Communications System Test for Japan, page 2
• Acronyms, page 3
Cisco Unified Communications System TestCisco Unified Communications System Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified systems-level solution for the various products and platformsin the Cisco Unified Communications System.
Cisco Unified Communications System Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams when combined, improves theUnified Communications System software quality. This is achieved by testing the various components.
The requirements for Cisco Unified Communications System Test is derived based on the following:
• Popular customer scenarios
• Input from various Business Units, fields and Cisco Services
The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as part of Cisco UnifiedCommunications System Test are:
• Interoperability/Compatibility
• Functionality
• Availability/Reliability/Stability
• Performance/Scalability/Capacity
• Usability/Serviceability
• Special focus area - CAP (Customer Assurance Program) /Technical Assistance Center (TAC)
• Security
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 1
Cisco Unified Communications System Test for JapanCisco Unified Communications System Test for Japan, in turn is an add-on testing at the solution level, wherethe requirements gathered are specific to Japanese usage and market. The requirements are derived based onthe following:
• Customer found defects in selected UC products
• High priority cases that are covered by the Cisco Unified Communications System Test team
• Inputs from SE's and TAC team of Cisco Japan
The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale, ISDNSwitch type being NTT and JPNP for Numbering Plan are implemented.
The objective of Cisco Unified Communications System Test for Japan is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, selected Cisco Compatible Products and third partyequipment.
In this Cisco Unified Communications System Test release for Japan, the following components are tested.
• Cisco Unified Communications Manager
• Cisco IP Phones
• Cisco TelePresence Video Communication Server
• Cisco TelePresence Video Communication Server Expressway
• Cisco Jabber for iPhone and iPad
• Cisco Jabber for Android
• Cisco Jabber for Windows
• Cisco Jabber for Mac
• Cisco Unified Communications Manager IM and Presence
• Cisco Unity Connection
• Cisco TelePresence Multipoint Control Unit
• Cisco TelePresence Management Suite
• Cisco TelePresence Conductor
• Cisco TelePresence Server 7010
• Cisco TelePresence Server on VM
• Cisco Jabber Guest
• Cisco Collaboration Expressway
• Cisco Prime Collaboration
• Upgrade / Migration
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan2
Cisco Unified Communications System TestCisco Unified Communications System Test for Japan
AcronymsDescriptionAcronym
Advanced Audio Coding - Low DelayAAC-LD
Automated Alternate RoutingAAR
Automatic Call DistributionACD
Alternate Contact NumberACN
Automatic Gain ControlAGC
Audible Message Waiting IndicatorAMWI
Alternate Network Address TranslationANAT
Adaptive Security ApplianceASA
American Standard Code for Information InterchangeASCII
Analog Telephone AdapterATA
Bulk Administration ToolBAT
Binary Floor Control ProtocolBFCP
Busy Lamp FieldBLF
Certificate AuthorityCA
CDR Analysis and ReportingCAR
Channel Associated SignalingCAS
Call Control DiscoveryCCD
Cisco Desktop AdministratorCDA
Cisco Discovery ProtocolCDP
Call Detail RecordCDR
Caller Entered DigitsCED
Call Forward AllCFA
Call Forward BusyCFB
Customer Found DefectCFD
Call Forward No AnswerCFNA
Call Forward No CoverageCFNC
Call Forward UnregisteredCFUR
Cisco Unified IP CommunicatorCIPC
Cisco Jabber for AndroidCJA
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 3
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Cisco Jabber for iPhoneCJI
Cisco Jabber for MacCJM
Cisco Jabber for iPadCJIPad
Cisco Jabber for WindowsCJW
Cisco Jabber for Windows WebEx MeetingCJWWM
Command Line InterfaceCLI
Calling Line IdentificationCLID
Client Matter CodeCMC
Clustering over WANCoW
Cisco Prime CollaborationCPC
Client Services FrameworkCSF
Calling Search SpaceCSS
Computer Telephony InterfaceCTI
Computer Telephony IntegrationCTI
Certificate Trust ListCTL
Cisco Unified Border ElementCUBE
Cisco Unity ConnectionCUC
Cisco Unified Communications ManagerCUCM
Cisco Unified Communications Manager IM and PresenceCUCM IM and Presence
Cisco Unified PresenceCUP
Cisco Unified Personal CommunicatorCUPC
Cisco WebEx Meetings ServerCWMS
Device and Credential RepositoryDCR
Dynamic Host Configuration ProtocolDHCP
Direct In-Ward DialingDID
Directory NumberDN
Do Not DisturbDND
Delayed OfferDO
Digital Private Network Signaling SystemDPNSS
Disaster Recovery SystemDRS
Differentiated Services Code PointDSCP
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan4
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Device Work CenterDWC
Extended Display Identification DataEDID
Enterprise License ManagerELM
Extension MobilityEM
Extension Mobility Cross ClusterEMCC
Early OfferEO
Cisco Enhanced Survivable Remote Site TelephonyE-SRST
Forced Authorization CodeFAC
Federal Information Processing StandardsFIPS
Fully Qualified Domain NameFQDN
Foreign Exchange OfficeFXO
Foreign Exchange StationFXS
Graphical User InterfaceGUI
GatewayGW
High AvailabilityHA
High DefinitionHD
Historical ReportingHR
Hyper Text Markup LanguageHTML
Inter Cluster TrunkICT
Identity ProviderIdP
Instant MessagingIM
IP Phone MessengerIPPM
IP Service Level AgreementsIPSLA
Integrated Services Digital NetworkISDN
Indian Standard TimeIST
Initial Trust ListITL
Key Expansion ModuleKEM
Log Collection CenterLCC
Lightweight Directory Access ProtocolLDAP
Media Convergence ServerMCS
Multipoint Control UnitMCU
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 5
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
MultiDimensional eXpressionsMDX
Managed File TransferMFT
Media Gateway Control ProtocolMGCP
Multilevel Precedence and PreemptionMLPP
Music On HoldMOH
Media Resource Group ListMRGL
Managed Service ProviderMSP
Maximum Transmission UnitMTU
Message Waiting IndicatorMWI
Network Interface and Configuration EngineNICE
Non Linear ProcessingNLP
New Technology LAN Manager version 2NTLMv2
Network Time ProtocolNTP
Operations ManagerOM
On Screen DisplayOSD
Product Authorization KeyPAK
Personal Communication AssistantPCA
Prime Collaboration DeploymentPCD
PC over IPPCoIP
Personal Identification NumberPIN
Plain Old Telephony SystemPOTS
Primary Rate InterfacePRI
Provisioning Northbound InterfaceProvisioning - NBI
Problem Reporting ToolPRT
Public Switched Telephone NetworkPSTN
Quality Report ToolQRT
Q-Signaling protocolQSIG
Really Simple SyndicationRSS
Real Time Control ProtocolRTCP
Real Time Monitoring ToolRTMT
Realtime Transport ProtocolRTP
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan6
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Security Assertion Markup LanguageSAML
Skinny Client Control ProtocolSCCP
Standard DefinitionSD
Service Enabling PlatformSEP
Session Initiation ProtocolSIP
Small and Midsize BusinessSMB
Cisco Unified Survivable Remote Site TelephonySRST
Secure ShellSSH
Secure Socket LayerSSL
Single Sign OnSSO
Technical Assistant CenterTAC
Transmission Control ProtocolTCP
Transport Layer SecurityTLS
TelePresence Management SuiteTMS
Trust Relay PointTRP
TelePresence ServerTS
Telephony User InterfaceTUI
Unified Computing SystemUCS
User Datagram ProtocolUDP
User Data ServiceUDS
Unified Messaging GatewayUMG
Uniform Resource IdentifierURI
Coordinated Universal TimeUTC
Cisco TelePresence Video Communication ServerVCS
Voice GatewayVGW
Voice Mail NotificationVMN
View Mail for OutlookVMO
Voice over IPVoIP
Voice Profile for Instant MessagingVPIM
Virtual Private NetworkVPN
Video SLA Assessment AgentVSAA
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 7
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
TelePresence Server on VMVTS
Wide Area NetworkWAN
Wireless FidelityWi-Fi
Extensive Application Programming InterfacexAPI
Extensible Markup LanguageXML
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan8
Cisco Unified Communications System TestAcronyms
C H A P T E R 2Test Topology and Environment Matrix
• Test Topology, page 10
• Environment Matrix, page 11
• Open Caveats, page 16
• What's New?, page 17
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 9
Test TopologyFigure 1: Topology in Use
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan10
Test Topology and Environment MatrixTest Topology
Upgrade
Figure 2: Topology in Use
Environment MatrixVersionComponentApplications
10.5.2.10000-5VersionCisco UnifiedCommunicationsManager
Call Control
10.5.2.1000-1Locale
3-1-9.JPDial Plan
10.5VersionCisco Unified SurvivableRemote Site Telephony(SRST) 15.5.1 TIOS
9.0.6VersionCisco Unified SRSTManager
X8.5.1VersionCisco TelePresence VideoCommunication Server(VCS) X7.2_LanguagePacks_BETALocale
X8.5.1VersionCisco TelePresence VideoCommunication ServerExpressway (VCSExpressway)
X7.2_LanguagePacks_BETALocale
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 11
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
10.5.2.10000-9VersionCisco UnifiedCommunicationsManagerIM and Presence Service
Applications
10.5.2.1000-1Locale
10.5.2.10000-5VersionCisco Unity ConnectionVoice Mail andUnified Messaging
10.5.2.1-1Locale
10.6.0.1015VersionCisco Prime CollaborationProvisioning
NetworkManagement
10.6.0.58162VersionCisco Prime CollaborationAssurance
2.1(1a)UCSC-C240-M3SCisco C-series ServerUpgrade /Migration
ESXi 5.1ESXi host onBlade Server
Hypervisor
MCS 7845 H2HardwareCisco UnifiedCommunicationsManager
MCS 7845 I2HardwareCisco Unity Connection
MCS 7835 I2HardwareCisco Unified Presence
15.4(3)TIOSVoice Gateway 2951
Voice Gateway 2921
15.0.2-SE 5Cisco 3750Access Switch
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan12
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
9-4-1-3SIPCisco Unified IP Phone6921/41/61
End Point
9-4-1-3SR1SCCP
9-4-1-3Cisco Unified IP Phone6945
10-2-1-12SR1-4Cisco IP Phone 7821/41/61
9-4-2-1Cisco Unified IP Phone7942/62/75
1-4-6-3Cisco Unified Wireless IPPhone 792X
10-3-1-16Cisco Unified IPConference Phone 8831
10-2-2-16Cisco IP Phone8811/41/51/61
9-4-2-8Cisco Unified IP Phone8941/8945
9-4(2)SR1-2Cisco Unified IP Phone9951/9971
10-3-1KK0-357Cisco DesktopCollaboration ExperienceDX650
1-1-0-006Cisco ATA 190 AnalogTelephone Adaptor
TC 7.3.1EX60 - Cisco TelePresenceSystem EX60
TC 7.3.1EX90 - Cisco TelePresenceSystem EX90
TC 7.3.1SX20 - Cisco TelePresenceSX20 Quick Set
TC 7.3.1SX80-Cisco TelePresenceSX80 Codec
TC 7.3.1SX10-Cisco TelePresenceSX10 Quick Set
TC 7.3.1C90 - Cisco TelePresenceSystem Integrator PackageC90
TX6.1.6(32)500-32 – CiscoTelePresence System 500(32)
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 13
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
TX9000 - CiscoTelePresence SystemTX9000
TX6.1.6(32)
TC 7.3.1MX200-G2- CiscoTelePresence MX200-G2
TC 7.3.1MX300-G2- CiscoTelePresence MX300-G2
10.2(3.33)DX70-Cisco DX70
10.2(3.33)DX80-Cisco DX80
15.5.1 TIOSISR Gateways (3945e,3925e, 3945, 2921)
CommunicationsInfrastructure
3.13.0SIOSISR 4451-X
15.5.1 TCisco Unified BorderElement for ISR
15.0.2-SE 5Cisco 3750 PoE Switch
ESXi 5.1.0vCenter Server
5.2(2 a)M9500MDS Switch
14.6.1VersionCisco TelePresenceManagement Suite - TMS
TelePresence
4.5 (1.55)VersionMCU4510& 5310 - CiscoTelePresence MCU
MCU_4-3_UI_and_audio_JPN.packageLocale
4.1(1.79)VersionCisco TelePresence Serveron VM
XC3.0.2VersionCisco TelePresenceConductor
4.1 (1.79)VersionCisco TelePresence Server7010
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan14
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
15.2VersionWireless Access Point1142
Wireless andMobility
15.2VersionWireless Access Point3502
10.6.0 (201496)Cisco Jabber for Mac
10.6.0.52330Cisco Jabber for Windows
10.6.0.202497VersionCisco Jabber for iPhoneand iPad
Apple iOS 8.1.2(12B440)iPhone 5
Apple iOS 8.1.2(12B440)iPad
10.6.0.204562VersionCisco Jabber for Android
Android OS 4.0.3Galaxy SII
Android OS 4.4.2Galaxy S4
Android OS 4.4.2Xperia Z1
10.5.3.25Version forWindows andMac
Cisco Jabber Guest
Windows OS 7Windows
Mac OS 10.9.4Mac
10.5.3.779Version for iOS
Apple iOS 8.1.2(12B440)iPhone 5
Apple iOS 8.1.2(12B440)iPad
10.5.1.512Version forAndroid
Android OS 4.0.3Galaxy SII
Android OS 4.4.2Galaxy S4
Android OS 4.4.2Xperia Z1
2.1(2a)Cisco UCS6140
Fabric InterconnectPRIMARY
UCS
2.1(2a)Cisco UCS6140
Fabric InterconnectSUBORDINATE
2.1(2a)Cisco UCS6140
Fabric Cluster
ESXi 5.1.0Blade Server-1ESXi Host
ESXi 5.1.0C-Series Server
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 15
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
Windows 7-SP1 (Japanese)Windows 7-SP1Operating SystemClient
Windows 8/8.1 (Japanese)Windows 8/8.1
10.9.4Mac
IE 11 (Supported Japanese language)IEBrowser
Firefox 32.0, Firefox ESR 24, 31(Supported Japanese language)
Mozilla
Chrome 37.0 (Supported Japaneselanguage)
Chrome
Windows Server 2008 (R2 Enterprise -Japanese)
MicrosoftWindows ServerServer
Windows Server 2012
2013Microsoft Exchange Server
2.5.1.28.BCisco WebEx MeetingsServer
10.5.3.115Cisco Jabber Guest Server
Note:
Jabber for iOS:
Cisco Jabber for iOS 10.6 is supported on 8.x or later versions of iOS. It is not supported in the iOS versionslower than 8.x. Hence, iPhone 4 is not supported for Cisco Jabber for iOS 10.6
Jabber for Android OS:
For a language, Android mobile devices will follow the Android's language Settings and for date format/time,it would follow the Android OS date format/ time Settings
Eg., In Japanese Environment, if Japanese date format is needed during a group chat then the Japanese dateformat settings needs to be changed in Android OS Settings
Open CaveatsTitleDefect ID
Cisco IP Phones
CFA details is not displayed in 88xx IP PhonesCSCus84536
Update key toast is appearing twice in 88xx Phones during conferenceCSCus88792
Cisco Web Dialer pages are not localized in JPCSCut22770
Cisco TelePresence Video Communication Server
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan16
Test Topology and Environment MatrixOpen Caveats
TitleDefect ID
SX10 is not properly localized to Japanese in Set up assistant while usingremote control RC6
CSCus75009
In SX10 setup assistant is not reverted properly to English from ArabicCSCus76235
Cisco Jabber for iOS
Group chat invite is coming in English in Jabber for iPhoneCSCut11162
Cisco Jabber for Android
Secret and Angel Emoticon is not showing in Jabber for AndroidCSCut22052
Cisco Jabber for Mac
Group chat invite is displaying in English on Jabber for MacCSCut16237
Cisco Prime Collaboration Analytics
Data is not getting generated in detail view of Least Used Endpoint TypeCSCus70556
What's New?Cisco IP Phone 8811:
The Cisco IP Phone 8811 is a cost-effective, business-class collaboration endpoint that delivers high-fidelity,reliable, secure, and scalable voice communications for mid-size to large enterprise businesses. The Cisco IPPhone 8811 supports five programmable line keys. You can configure keys to support either multiple directorynumbers or calling features such as speed dial. Fixed-function keys give you one-touch access to applications,messaging, directory, as well as often-used calling features such as hold/resume, transfer, and conference. Itoffers a 5-in. high-resolution (800 x 480) wide-screen backlit grayscale display. Localized language support,including right-to-left on-screen text, meets the needs of global users. The phone supports a built-in GigabitEthernet switch for your PC connection.
Managed File Transfer:
Managed file transfer (MFT) allows an IM and Presence Service client, such as Cisco Jabber, to transfer filesto other users, ad hoc group chat rooms, and persistent chat rooms. The files are stored in a repository on anexternal file server and the transaction is logged to an external database. The file server is the repository forfiles transferred by the managed file transfer featureMetadata associated with a managed file transfer is storedin an external database. Files are stored on an external Linux file server, not in IM and Presence Service.
Cisco DX70:
The Cisco DX70 offers un compromised collaboration for every desk. Experience best in class HD video andexpanded collaboration capabilities such as UC features, Android applications and email all within a singleintegrated device. It is dedicated, always-on 1080p High-Definition video communication system. DX70 isFully-featured IP Phone that registers to Cisco UCM call control. It has High-quality audio system for speakerphone and media playback.
Cisco DX80:
The Cisco DX80 brings everything you need to be productive in one sleek integrated device. All you need isone screen on the desk. Experience best in class HD video and expanded collaboration capabilities such as
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 17
Test Topology and Environment MatrixWhat's New?
extensive UC features, Android applications and email in Cisco DX80. It is a 23-inch 16:9 screen providesan engaging experience for video calls and running apps. Multi-touch capacitive touchscreen provides elegantand powerful user interface. Security Enhanced Android operating system combined with Cisco's end-to-endsecurity features gives peace of mind to network administrators.
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan18
Test Topology and Environment MatrixWhat's New?
C H A P T E R 3Test Results Summary
• Cisco TelePresence Video Communication Server, page 19
• Cisco Jabber for iPhone and iPad, page 49
• Cisco Jabber for Android, page 54
• Cisco Jabber for Windows, page 56
• Cisco Jabber for Mac, page 63
• Cisco TelePresence Multipoint Control Unit, page 65
• Cisco TelePresence Management Suite, page 69
• Cisco TelePresence Conductor, page 73
• Cisco TelePresence Server, page 76
• Cisco Jabber Guest, page 80
• Cisco Collaboration Expressway, page 84
• Cisco IP Phone Validation, page 87
• Cisco Prime Collaboration, page 100
• Cisco Unified Communication System Upgrade / Migration Test, page 127
• Related Documentation, page 138
Cisco TelePresence Video Communication ServerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 19
NilPassedTX9000 ->UnifiedCM -> CiscoDX70
Verify whether videocall is establishedsuccessfully betweenCisco TelePresenceTX9000 registeredwith Cisco UnifiedCommunicationsManager and CiscoDX70 registered withCisco UnifiedCommunicationsManager
Making videocall fromTX9000 toCisco DX70
UCJ10.6SPH2.VCS.G.001
NilPassedTX9000 ->UnifiedCM -> CiscoDX80
Verify whether videocall is establishedsuccessfully betweenCisco TelePresenceTX9000 registeredwith Cisco UnifiedCommunicationsManager and CiscoDX80 registered withCisco UnifiedCommunicationsManager
Making videocall fromTX9000 toCisco DX80
UCJ10.6SPH2.VCS.G.002
NilPassedTX9000 ->UnifiedCM -> CiscoDX70(Hold/Resume)
Verify whetherHold/Resume ofvideo call betweenCisco TelePresenceTX9000 and CiscoDX70 registered withCisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumevideo call fromTX9000 toCisco DX70
UCJ10.6SPH2.VCS.G.003
NilPassedTX9000 ->UnifiedCM -> CiscoDX80(Hold/Resume)
Verify whetherHold/Resume ofvideo call betweenCisco TelePresenceTX9000 and CiscoDX80 registered withCisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumevideo call fromTX9000 toCisco DX80
UCJ10.6SPH2.VCS.G.004
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan20
Test Results SummaryCisco TelePresence Video Communication Server
NilPassed500-32 -> UnifiedCM -> CiscoDX70 -> Transfer-> TX9000
Verify whether calltransfer from CiscoDX70 registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceTX9000registered with CiscoUnifiedCommunicationsManager workssuccessfully
Call transferfrom CiscoDX70 toTX9000
UCJ10.6SPH2.VCS.G.005
NilPassed500-32 -> UnifiedCM -> CiscoDX80 -> Transfer-> TX9000
Verify whether calltransfer from CiscoDX80 registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceTX9000registered with CiscoUnifiedCommunicationsManager workssuccessfully
Call transferfrom CiscoDX80 toTX9000
UCJ10.6SPH2.VCS.G.006
NilPassedEX90 -> UnifiedCM -> TX9000SX80 Codec ->Unified CM ->TX9000 ->Forward Busy ->Unified CM ->DX70
Verify whether CallForward Busy isworking for CiscoTelePresenceTX9000registered in CiscoUnifiedCommunicationsManager to CiscoDX70 registered inCisco UnifiedCommunicationsManager
Call forwardBusy forTX9000 toDX70 registeredin Unified CM
UCJ10.6SPH2.VCS.G.007
NilPassedEX90 -> UnifiedCM -> TX9000 ->Call Forward NoAnswer -> UnifiedCM -> DX80
Verify whether CallForward No Answercan be set in CiscoTelePresenceTX9000registered in CiscoUnifiedCommunicationsManager to CiscoDX80 registered inCisco UnifiedCommunicationsManager
Call ForwardNoAnswer inTX9000 toDX80 registeredin Unified CM
UCJ10.6SPH2.VCS.G.008
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 21
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedDX70 -> UnifiedCM -> 500-32
Verify whether videocall fromCiscoDX70to Cisco TelePresenceSystem 500-32 bothregistered with CiscoUnifiedCommunicationsManager can beestablished
Making VideoCall from DX70to 500-32 bothregistered withUnified CM
UCJ10.6SPH2.VCS.G.009
NilPassedEX90 -> UnifiedCM -> DX70EX60 -> UnifiedCM -> DX70 ->Call Forward Busy-> Unified CM ->500-32
Verify whether CallForward Busy inCisco DX70 to CiscoTelePresence System500-32 bothregistered with CiscoUnifiedCommunicationsManager works
Call ForwardBusy fromDX70 to 500-32both registeredwith UnifiedCM
UCJ10.6SPH2.VCS.G.010
NilPassedEX90 -> UnifiedCM -> DX70 ->Call Forward All-> Unified CM ->500-32
Verify whether CallForward All in CiscoDX70 to CiscoTelePresence System500-32 bothregistered with CiscoUnifiedCommunicationsManager works
Call ForwardAllin DX70 to500-32 bothregistered withUnified CM
UCJ10.6SPH2.VCS.G.011
NilPassedDX80 -> UnifiedCM -> 500-32
Verify whether videocall fromCiscoDX80to Cisco TelePresenceSystem 500-32 bothregistered with CiscoUnifiedCommunicationsManager can beestablished
Making VideoCall from DX80to 500-32 bothregistered withUnified CM
UCJ10.6SPH2.VCS.G.012
NilPassedEX90 -> UnifiedCM -> DX80 ->Hold/Transfer ->Unified CM ->500-32
Verify whether videocall from CiscoTelePresence SystemEX90 to Cisco DX80can be transferred toCisco TelePresenceSystem 500-32 bothregistered with CiscoUnifiedCommunicationsManager
Consultative calltransfer fromDX80 to 500-32both registeredwith UnifiedCM
UCJ10.6SPH2.VCS.G.013
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan22
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedEX90 -> UnifiedCM -> DX80EX60 -> UnifiedCM -> DX80 ->Call Forward Busy-> Unified CM ->500-32
Verify whether CallForward Busy inCisco DX80 to CiscoTelePresence System500-32 bothregistered with CiscoUnifiedCommunicationsManager works
Call ForwardBusy fromDX80 to 500-32both registeredwith UnifiedCM
UCJ10.6SPH2.VCS.G.014
NilPassedEX90 -> UnifiedCM -> DX80 ->Call Forward NoAnswer -> UnifiedCM -> 500-32
Verify whether CallForward No Answerin Cisco DX80 toCisco TelePresenceSystem 500-32 bothregistered with CiscoUnifiedCommunicationsManager works
Call ForwardNoAnswer fromDX80 to 500-32both registeredwith UnifiedCM
UCJ10.6SPH2.VCS.G.015
NilPassedDX70 -> UnifiedCM -> EX90
Verify whether call isestablishedsuccessfully whenCisco DX70registered with CiscoUnifiedCommunicationsManager makes callto Cisco TelePresenceSystem EX90registered with CiscoUnifiedCommunicationsManager by URIdialing
URI dialingfrom DX70 toEX90
UCJ10.6SPH2.VCS.G.016
NilPassedDX80 -> UnifiedCM -> DX70
Verify whether call isestablishedsuccessfully whenCisco DX80registered with CiscoUnifiedCommunicationsManager makes callto Cisco DX70registered with CiscoUnifiedCommunicationsManager by URIdialing
URI dialingfrom DX80 toDX70
UCJ10.6SPH2.VCS.G.017
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 23
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX80 Codec(PresentationSharing) ->Unified CM ->DX70
Verify whetherpresentation is sharedto Cisco DX70 fromCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager
Presentationsharing fromSX80 Codecregistered withUnified CM toDX70
UCJ10.6SPH2.VCS.G.018
NilPassedSX80 Codec(PresentationSharing) -> CiscoVCS -> SIP Trunk-> Unified CM ->DX70
Verify whetherpresentation is sharedto Cisco DX70registered with CiscoUnifiedCommunicationsManager from CiscoTelePresence SX80Codec registered withCisco TelePresenceVideoCommunicationServer
Presentationsharing fromSX80 Codecregistered withCisco VCS toDX70
UCJ10.6SPH2.VCS.G.019
NilPassedSX10 Quick Set ->Unified CM ->DX70
Verify whether theAAC-LD codec isused for the audio callbetween CiscoTelePresence SX10Quick Set and CiscoDX70 registered withCisco UnifiedCommunicationsManager
AAC-LDCodecfor the audio callbetween SX10Quick Set andDX70
UCJ10.6SPH2.VCS.G.020
NilPassedNAVerify whether theuser can login to SelfCare Portal of CiscoDX70 registered withCisco UnifiedCommunicationsManager
Login to SelfCare Portal ofDX70 user
UCJ10.6SPH2.VCS.G.021
NilPassedNAVerify whether theuser can add speeddial to Cisco DX70registered with CiscoUnifiedCommunicationsManager using SelfCare Portal
Adding speeddial for DX70using Self CarePortal
UCJ10.6SPH2.VCS.G.022
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan24
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedNAVerify whether theuser can change ringsettings "when not oncall" for Cisco DX70registered with CiscoUnifiedCommunicationsManager using SelfCare Portal
Changing ringsettings "whennot on call" forDX70 using SelfCare Portal
UCJ10.6SPH2.VCS.G.023
NilPassedDX70 -> UnifiedCM -> DX80
Verify whether CiscoDX70 automaticallyflips the imagevertically and acts asdocument camerawhen camera is tilteddownwards facing adocument when in acall with Cisco DX80registered with CiscoUnifiedCommunicationsManager
Using DX70camera asDocumentCamera
UCJ10.6SPH2.VCS.G.024
NilPassedDX70(PresentationSharing) ->Unified CM ->SX80 Codec
Verify whetherpresentation is sharedfrom Cisco DX70 toCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager
Presentationsharing fromDX70 registeredwith UnifiedCM to SX80Codec
UCJ10.6SPH2.VCS.G.025
NilPassedSX10 Quick Set ->Unified CM ->DX70 & DX80(Shared Line)
Verify whether bothCisco DX70 andCisco DX80 whichare in Shared Lineand registered withCisco UnifiedCommunicationsManager rings whenmaking call fromCisco TelePresenceSX10 Quick Set
Make call fromSX10 Quick Setto shared line ofDX70 andDX80
UCJ10.6SPH2.VCS.G.026
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 25
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX10 Quick Set ->Unified CM ->DX70 -> Hold ->DX80 -> Resume
Verify whether thecall which is on holdin CiscoDX70 can beresumed from CiscoDX80 registered withCisco UnifiedCommunicationsManager when bothare in shared line
Hold in DX70and resume fromDX80 whenboth are inshared line
UCJ10.6SPH2.VCS.G.027
NilPassedSX80 Codec ->Unified CM ->Cisco DX70
Verify whether audiocall is establishedsuccessfully betweenCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager and CiscoDX70 registered withCisco UnifiedCommunicationsManager
Making audiocall from SX80Codec to DX70
UCJ10.6SPH2.VCS.G.028
NilPassedSX80 Codec ->Unified CM ->Cisco DX80(Hold/Resume)
Verify whetherHold/Resume ofaudio call betweenCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager and CiscoDX80 registered withCisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumeaudio call fromSX80 Codec toDX80
UCJ10.6SPH2.VCS.G.029
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan26
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedCisco DX80 ->Unified CM -> SIPTrunk -> CiscoVCS -> EX90
Verify whether videocall is establishedsuccessfully betweenCisco DX80registered with CiscoUnifiedCommunicationsManager and CiscoTelePresence SystemEX90 registered withCisco TelePresenceVideoCommunicationServer
Making videocall from DX80to EX90registered withCisco VCS
UCJ10.6SPH2.VCS.G.030
NilPassedEX90 -> CiscoVCS -> SIP Trunk-> Unified CM ->Cisco DX70
Verify whether audiocall is establishedsuccessfully betweenCisco DX70registered with CiscoUnifiedCommunicationsManager and CiscoTelePresence SystemEX90 registered withCisco TelePresenceVideoCommunicationServer
Making audiocall from EX90registered withCisco VCS toDX70
UCJ10.6SPH2.VCS.G.031
NilPassedDX70(1) ->Unified CM1 ->SIP Trunk ->Unified CM2 ->DX70(2)
Verify whether videocall is establishedsuccessfully betweenCisco DX70(1)registered with CiscoUnifiedCommunicationsManager cluster 1 andCisco DX70(2)registered with CiscoUnifiedCommunicationsManager cluster 2
Makinginter-clustervideo callbetweenDX70(1) andDX70(2)
UCJ10.6SPH2.VCS.G.032
NilPassedDX80 -> UnifiedCM -> DX70(Hold) -> HoldReversion after 10secs
Verify whether holdreversion is workingsuccessfully in CiscoDX70 registered withCisco UnifiedCommunicationsManager
Hold reversionin Cisco DX80
UCJ10.6SPH2.VCS.G.033
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 27
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedDX70 ( DocumentSharing ) ->Unified CM ->500-32
Verify whetherdocument is shared toCisco TelePresenceSystem 500-32 fromCisco DX70 usingcamera as documentcamera when both areregistered with CiscoUnifiedCommunicationsManager
Sharingdocument to500-32 fromDX70 usingdocumentcamera
UCJ10.6SPH2.VCS.G.034
NilPassedSX10 Quick Set ->Unified CM ->DX70 -> Park ->Unified CM ->500-32 -> Retrieve
Verify whether thecall with CiscoTelePresence SX10Quick Set is parked inCisco DX70 andretrieved from CiscoTelePresence System500-32, all areregistered with CiscoUnifiedCommunicationsManager
Call park atDX70 andretrieve from500-32
UCJ10.6SPH2.VCS.G.035
NilPassedDX80 -> UnifiedCM -> 500-32
Verify whether audiocall between CiscoDX80 registered withCisco UnifiedCommunicationsManager and CiscoTelePresence System500-32 registeredwith Cisco UnifiedCommunicationsManager is workingsuccessfully
Making audiocall from DX80to 500-32
UCJ10.6SPH2.VCS.G.036
NilPassedDX70 -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->500-32
Verify whether videocall is establishedbetween Cisco DX70registered with CiscoUnifiedCommunicationsManager cluster 1 andCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager cluster 2
Inter-clustervideo call fromDX70 to 500-32
UCJ10.6SPH2.VCS.G.037
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan28
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedDX80 -> UnifiedCM -> DX70 ->HoldEX90 -> CiscoVCS -> SIP Trunk-> Unified CM ->DX80
Verify whether CiscoDX80, registeredwithCisco UnifiedCommunicationsManager can hold thecurrent call withCisco DX70registered with CiscoUnifiedCommunicationsManager and answersecond call fromCisco TelePresenceSystem EX90registered with CiscoTelePresence VideoCommunicationServer
Making secondcall to CiscoDX80 when oncall with DX70
UCJ10.6SPH2.VCS.G.038
NilPassedNAVerify whether CiscoTelePresence SX80Codec can beregistered as SIP andH.323 simultaneouslyin Cisco TelePresenceVideoCommunicationServer
SIP and H.323simultaneousregistration inSX80 Codec
UCJ10.6SPH2.VCS.G.039
NilPassedSX80 Codec(presentationpreview locally) ->Unified CM ->EX90
Verify whether thepresentation ispreviewed locally inCisco TelePresenceSX80 Codec when ina call with CiscoTelePresence SystemEX90 both registeredin Cisco UnifiedCommunicationsManager
Local preview ofpresentation inSX80 Codecregistered withUnified CMwhile in a call
UCJ10.6SPH2.VCS.G.040
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 29
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX80 Codec(PresentationPreview Locally)-> Cisco VCS ->EX90
Verify whether thepresentation ispreviewed locally inCisco TelePresenceSX80 Codec when ina call with CiscoTelePresence SystemEX90 both registeredin Cisco TelePresenceVideoCommunicationServer
Local preview ofpresentation inSX80 Codecregistered withCisco VCSwhile in a call
UCJ10.6SPH2.VCS.G.041
NilPassedNAVerify whether thepresentation is notdisplayedautomatically aftersetting thepresentation selectionto Manual in CiscoTelePresence SX80Codec usingcommandxConfigurationVideoInput Connector 3PresentationSelection:Manual in xAPI
Setting thepresentationselection asManual in SX80Codec usingxAPI command
UCJ10.6SPH2.VCS.G.042
NilPassedNAVerify whether thepresentation isdisplayed in both themonitors of CiscoTelePresence SX80Codec registered inCisco UnifiedCommunicationsManager during outof call
Local preview ofpresentation inSX80 Codecdual displayduring out ofcall
UCJ10.6SPH2.VCS.G.043
NilPassedNAVerify whether thewarning is displayedin the monitor ofCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager when takingweb snapshots
Checking websnapshotwarning in SX80Codec displaywhen not in call
UCJ10.6SPH2.VCS.G.044
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan30
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX80 Codec ->Unified CM ->EX90
Verify whether theweb snapshotwarningis displayed in themonitor of CiscoTelePresence SX80Codec when in a callwith CiscoTelePresence SystemEX90 both registeredin Cisco UnifiedCommunicationsManager
Checking websnapshotwarning in SX80Codec displayduring call
UCJ10.6SPH2.VCS.G.045
NilPassedNAVerify whether admingets warning in WebGUI of CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager beforetaking the websnapshots
Checking adminwarning in WebGUI of SX80Codec beforetaking websnapshot
UCJ10.6SPH2.VCS.G.046
NilPassedNAVerify whether theeye icon is displayedin Cisco TelePresenceSX80 Codec duringactive monitor byadmin
Checking eyeicon in SX80Codec displayduring activemonitor byadmin
UCJ10.6SPH2.VCS.G.047
NilPassedSX10 Quick Set ->Unified CM ->SX80 Codec ->Add -> EX90(Audio)
Verify whetheradditional audio callwhenmultisite optionis turned off is addedfrom CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager
Additional audiocall in SX80Codec when allvideoconnections areused
UCJ10.6SPH2.VCS.G.048
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 31
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX80 Codec(PresentationSharing) ->Unified CM ->EX90
Verify whether thepresentation isdisplayed in onemonitor and video inother monitor ofCisco TelePresenceSX80 Codec duringpresentation sharingwith CiscoTelePresence SystemEX90 both registeredin Cisco UnifiedCommunicationsManager
Video call andpresentationsharing in SX80Codec (dualdisplay)registered withUnified CM
UCJ10.6SPH2.VCS.G.049
NilPassedSX80 Codec(PresentationSharing) -> CiscoVCS -> EX90
Verify whether thepresentation isdisplayed in onemonitor and video inother monitor ofCisco TelePresenceSX80 Codec duringpresentation sharingwith CiscoTelePresence SystemEX90 both registeredin Cisco TelePresenceVideoCommunicationServer
Video call andpresentationsharing in SX80Codec (dualdisplay)registered withCisco VCS
UCJ10.6SPH2.VCS.G.050
NilPassedEX60 (SIP) ->Cisco VCS ->SX80 Codec (SIP& H.323)
Verify whether callfrom CiscoTelePresence SystemEX60 registered asSIP to CiscoTelePresence SX80Codec registered withSIP and H.323 inCisco TelePresenceVideoCommunicationServer can beestablishedsuccessfully
Making SIP callto SX80 Codecwhen it isregistered withSIP and H323
UCJ10.6SPH2.VCS.G.051
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan32
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedEX60 (H.323) ->Cisco VCS ->SX80 Codec (SIP& H.323)
Verify whether callfrom CiscoTelePresence SystemEX60 registered asH.323 to CiscoTelePresence SX80Codec registered withSIP and H.323 inCisco TelePresenceVideoCommunicationServer can beestablishedsuccessfully
Making H.323call to SX80Codec when it isregistered withSIP and H.323
UCJ10.6SPH2.VCS.G.052
NilPassedSX80 Codec ->Cisco VCS ->SX20 Quick SetSX80 Codec ->Add -> Cisco VCS-> MCU 5310 ->EX90
Verify whether theMultiway conferencein Cisco TelePresenceSX80 Codec withCisco TelePresenceSX20 Quick Set andCisco TelePresenceSystem EX90 workssuccessfully
Multiwayconference inSX80 Codecwith SX20Quick Set andEX90
UCJ10.6SPH2.VCS.G.053
NilPassedSX80 Codec ->Cisco VCS ->EX90SX80 Codec ->Add -> Cisco VCS-> SX10 Quick Set
Verify whether thetwo monitors areutilized for video ofthe participantsduring conference inCisco TelePresenceSX80 Codecregistered in CiscoTelePresence VideoCommunicationServer
MultisiteConference inSX80 Codecwith dualdisplayregistered inCisco VCS
UCJ10.6SPH2.VCS.G.054
NilPassedSX80 Codec ->Unified CM ->EX90SX80 Codec ->Add -> UnifiedCM -> SX10Quick Set
Verify whether thetwo monitors areutilized for video ofthe participantsduring conference inCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager
MultisiteConference inSX80 Codecwith dualdisplayregistered inUnified CM
UCJ10.6SPH2.VCS.G.055
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 33
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedNAVerify whether admingets warning in 10seconds interval aftertaking web snapshotin Cisco TelePresenceSX80 Codec WebGUI
Checkingwarning foradmin in 10seconds intervalafter taking websnapshot inSX80 CodecWeb GUI
UCJ10.6SPH2.VCS.G.056
NilPassedNAVerify whether CDPmode can be set toON/OFF using xAPIof Cisco TelePresenceSystem EX90 usingcommandxConfigurationNetworkServicesCDP Mode: <Off,On>
On/OFF CDPmode in xAPI ofEX90
UCJ10.6SPH2.VCS.G.057
NilPassedNAVerify whether thecertificate checkermessage is displayedwhen discoveringCisco UnifiedCommunicationsManager with TLSverify mode is ON inCisco TelePresenceVideoCommunicationServer Control
Certificatecheckermessagein Cisco VCS-CwhendiscoveringUnified CMwith TLS verifymode is ON
UCJ10.6SPH2.VCS.G.058
NilPassedNAVerify whether thetraversal certificate ischecked by givingFQDN and TLSverify name in CiscoTelePresence VideoCommunicationServer Control
Secure traversaltest for CiscoVCS-C byspecifying TLSverify name
UCJ10.6SPH2.VCS.G.059
NilPassedNAVerify whether newPhoenix OSD isdisplayed in CiscoTelePresence SX20Quick Set monitorwhen paired withTouch 10"
Checking newPhoenix OSD inSX20 Quick Setpaired withTouch 10"
UCJ10.6SPH2.VCS.G.060
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan34
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedNAVerify whether newPhoenix OSD isdisplayed in CiscoTelePresence SX20Quick Set monitorwhen paired withTouch 8"
Checking newPhoenix OSD inSX20 Quick Setpaired withTouch 8"
UCJ10.6SPH2.VCS.G.061
NilPassedNAVerify whether theremote support usercan add the build inupgrade folder ofSX20 Quick Set
Checking writeaccess forremote supportuser to Upgradefolder of SX20Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.062
NilPassedNAVerify whether theManual option set toPresentation Selectionmenu of CiscoTelePresence SX20Quick Set workssuccessfully
CheckingManual optionfor PresentationSelection Setting
UCJ10.6SPH2.VCS.G.063
NilPassedNAVerify whether themonitoring icontimeout in CiscoTelePresence SX20Quick Set displaywhen monitoring isinactive by the adminworks successfully
Checking fortime out ofmonitoring iconin SX20 QuickSet display after30 seconds ofactivemonitoring
UCJ10.6SPH2.VCS.G.064
NilPassedSX20 Quick Set ->Unified CM ->Integrator PackageC90 -> LocalPresentationPreview in SX20Quick Set
Verify whether theLocal PresentationPreview in CiscoTelePresence SX20Quick Set when in acall with CiscoTelePresence SystemIntegrator PackageC90 both registered inCisco UnifiedCommunicationsManager workssuccessfully
LocalPresentationPreview in SX20Quick Setregistered withUnified CMwhile in a call
UCJ10.6SPH2.VCS.G.065
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 35
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX20 Quick Set ->Cisco VCS ->Integrator PackageC90 -> LocalPresentationPreview in SX20Quick Set
Verify whether theLocal PresentationPreview in CiscoTelePresence SX20Quick Set when in acall with CiscoTelePresence SystemIntegrator PackageC90 both registeredwith CiscoTelePresence VideoCommunicationserver workssuccessfully
LocalPresentationPreview in SX20Quick Setregistered withCisco VCSwhile in a call
UCJ10.6SPH2.VCS.G.066
NilPassedSX20 Quick Set ->Unified CM ->EX90SX20 Quick Set ->Add -> UnifiedCM -> IntegratorPackage C90 ->Local PresentationPreview in SX20Quick Set
Verify whether theLocal PresentationPreview in CiscoTelePresence SX20Quick Set when in aconferencewith CiscoTelePresence SystemEX90 and CiscoTelePresence SystemIntegrator PackageC90 all are registeredin Cisco UnifiedCommunicationsManager
LocalPresentationPreview in SX20Quick Setregistered withUnified CMduringconference
UCJ10.6SPH2.VCS.G.067
NilPassedNAVerify whether CDPmode can be set toON/OFF using xAPIof Cisco TelePresenceSX20Quick Set usingxConfigurationNetworkServicesCDP Mode: <Off,On> command
Setting CDPmode to On /Off in SX20Quick Set
UCJ10.6SPH2.VCS.G.068
NilPassedNAVerify whether theremote support usercan add the build inupgrade folder ofCisco TelePresenceMX300-G2
Checking writeaccess forremote supportuser to Upgradefolder ofMX300-G2
UCJ10.6SPH2.VCS.G.069
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan36
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX10Quick Set ->Unified CM ->SX20 Quick SetSX10 Quick Set ->Add -> UnifiedCM -> SIP Trunk-> MCU 4510 ->EX90
Verify whetherAdhoc conferencefrom CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set and CiscoTelePresence SystemEX90 both registeredwith Cisco UnifiedCommunicationsManager can beestablished
Adhocconferencingfrom SX10Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.070
NilPassedNAVerify whether iPadcan be paired withCisco TelePresenceSX10 Quick Setregistered with CiscoUnifiedCommunicationsManager throughCisco Proximity
Cisco Proximitypairing of iPadwith SX10Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.071
NilPassediPad (Paired withSX10 Quick Set)-> Unified CM ->SX20 Quick Set
Verify whether videocall from iPad pairedwith CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager can beestablished throughCisco Proximity
Making videocall from iPadpaired withSX10 Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.072
NilPassedNAVerify whetheriPhone can be pairedwith CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager throughCisco Proximity
Cisco Proximitypairing ofiPhone withSX10 Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.073
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 37
Test Results SummaryCisco TelePresence Video Communication Server
NilPassediPhone (Pairedwith SX10 QuickSet) -> UnifiedCM -> SX20Quick Set
Verify whether videocall from iPhonepaired with CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager can beestablished throughCisco Proximity
Making videocall from iPhonepaired withSX10 Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.074
NilPassedSX10 Quick Set ->Unified CM ->SX20 Quick Set
Verify whether thecall can bedisconnected in CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager when thecall is ended in iPadthrough Ciscoproximity
Making callfrom SX10Quick Setregistered withUnified CM andending the callfrom iPadthrough CiscoProximity
UCJ10.6SPH2.VCS.G.075
NilPassedSX10 Quick Set ->Unified CM ->SX20 Quick Set
Verify whether thecall can bedisconnected in CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager when thecall is ended iniPhone through Ciscoproximity
Making callfrom SX10Quick Setregistered withUnified CM andending the callfrom iPhonethrough CiscoProximity
UCJ10.6SPH2.VCS.G.076
NilPassedNAVerify whether CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager can belogged in as EM user
Logging inSX10 Quick Setas EM user
UCJ10.6SPH2.VCS.G.077
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan38
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX10 Quick Set(EM User ) ->Unified CM ->SX20 Quick Set
Verify whether videocall from CiscoTelePresence SX10Quick Set logged inas EM user to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager can beestablished
Making videocall from SX10Quick Setlogged in as EMuser
UCJ10.6SPH2.VCS.G.078
NilPassedSX10 Quick Set(EM User ) ->Unified CM ->SX20 Quick Set -> PresentationSharing
Verify whetherpresentation sharingfrom CiscoTelePresence SX10Quick Set logged inas EM user to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
Presentationsharing fromSX10 Quick Setlogged in as EMuser
UCJ10.6SPH2.VCS.G.079
NilPassedSX20 Quick Set ->Unified CM ->SX10 Quick Set
Verify whether theOverscan level set toHigh in CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
SettingOverscan levelto High in SX10Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.080
NilPassedSX20 Quick Set ->Unified CM ->SX10 Quick Set
Verify whether theOverscan level set toMedium in CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
SettingOverscan levelto Medium inSX10 Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.081
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 39
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX20 Quick Set ->Unified CM ->SX10 Quick Set
Verify whether theOverscan level set toNone in CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
SettingOverscan levelto None in SX10Quick Setregistered withUnified CM
UCJ10.6SPH2.VCS.G.082
NilPassedNAVerify whetherwarning message isdisplayed in themonitor of CiscoTelePresence SX10Quick Set registeredin Cisco UnifiedCommunicationsManager when takingweb snapshots
Checking websnapshotwarning in SX10Quick Setdisplaywhen notin call
UCJ10.6SPH2.VCS.G.083
NilPassedNAVerify whether theadmin gets warningmessage in Web GUIof Cisco TelePresenceSX10 Quick Setregistered with CiscoUnifiedCommunicationsManager beforetaking the websnapshots
Ensuring thewarningmessage in WebGUI of SX10Quick Set priorto taking websnapshot
UCJ10.6SPH2.VCS.G.084
NilPassedNAVerify whether theeye icon is displayedin Cisco TelePresenceSX10 Quick Setduring activemonitoring by admin
Checking eyeicon in SX10Quick Setdisplay duringactivemonitoring byadmin
UCJ10.6SPH2.VCS.G.085
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan40
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX10 Quick Set ->Unified CM ->Integrator PackageC90 -> LocalPresentationPreview in SX10Quick Set
Verify whether theLocal PresentationPreview in CiscoTelePresence SX10Quick Set when in acall with CiscoTelePresence SystemIntegrator PackageC90 both registered inCisco UnifiedCommunicationsManager workssuccessfully
LocalPresentationPreview in SX10Quick Setregistered withUnified CMwhile in a call
UCJ10.6SPH2.VCS.G.086
NilPassedSX10 Quick Set ->Unified CM ->EX90SX10 Quick Set ->Add -> UnifiedCM -> IntegratorPackage C90 ->Local PresentationPreview in SX10Quick Set
Verify whether theLocal PresentationPreview in CiscoTelePresence SX10Quick Set when in aconferencewith CiscoTelePresence SystemEX90 and CiscoTelePresence SystemIntegrator PackageC90 all are registeredin Cisco UnifiedCommunicationsManager
LocalPresentationPreview in SX10Quick Setregistered withUnified CMduringconference
UCJ10.6SPH2.VCS.G.087
NilPassedNAVerify whether CDPmode can be set toON/OFF using xAPIof Cisco TelePresenceSX10Quick Set usingxConfigurationNetworkServicesCDP Mode: <Off,On> command
Setting CDPmode to On /Off in SX10Quick Set
UCJ10.6SPH2.VCS.G.088
NilPassedNAVerify whether theremote support usercan add the build inupgrade folder ofCisco TelePresenceSX10 Quick Set
Checking writeaccess forremote supportuser to Upgradefolder of SX10Quick Set
UCJ10.6SPH2.VCS.G.089
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 41
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedIntegrator PackageC90 (LocalPresentationPreview) ->Unified CM ->EX90
Verify whether theLocal PresentationPreview in CiscoTelePresenceIntegrator PackageC90 when in a callwith CiscoTelePresence SystemEX90 both registeredin Cisco UnifiedCommunicationsManager workssuccessfully
LocalPresentationPreview inIntegratorPackage C90registered withUnified CMwhile in a call
UCJ10.6SPH2.VCS.G.090
NilPassedIntegrator PackageC90 (LocalPresentationPreview) -> CiscoVCS -> EX90
Verify whether theLocal PresentationPreview in CiscoTelePresenceIntegrator PackageC90 when in a callwith CiscoTelePresence SystemEX90 both registeredwith CiscoTelePresence VideoCommunicationserver workssuccessfully
LocalPresentationPreview inIntegratorPackage C90registered withCisco VCSwhile in a call
UCJ10.6SPH2.VCS.G.091
NilPassedIntegrator PackageC90 (PresentationPreview) ->Unified CM ->EX90 -> Add ->Unified CM ->EX60
Verify whether theLocal PresentationPreview in CiscoTelePresenceIntegrator PackageC90 when in aconferencewith CiscoTelePresence SystemEX90 and CiscoTelePresence SystemEX60 all areregistered in CiscoUnifiedCommunicationsManager
LocalPresentationPreview inIntegratorPackage C90registered withUnified CMduringconference
UCJ10.6SPH2.VCS.G.092
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan42
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedNAVerify whether CDPmode can be set toON/OFF using xAPIof Cisco TelePresenceIntegrator PackageC90 usingxConfigurationNetworkServicesCDP Mode: <Off,On> command
Setting CDPmode to On /Off in IntegratorPackage C90
UCJ10.6SPH2.VCS.G.093
NilPassedNAVerify whether theuser can add the buildin upgrade folder
Checking writeaccess forremote supportuser to Upgradefolder ofIntegratorPackage C90
UCJ10.6SPH2.VCS.G.094
NilPassedNAVerify whether theManual option set toPresentation Selectionmenu of CiscoTelePresenceIntegrator PackageC90 workssuccessfully
CheckingManual optionfor PresentationSelection Settingof IntegratorPackage C90
UCJ10.6SPH2.VCS.G.095
NilPassedEX90 -> CiscoVCS (Cluster) ->SX80 Codec ->Add -> Cisco VCS-> MCU ->Integrator PackageC90 (Multiway)
Verify whether theMultiway conferenceis workingsuccessfully whenCisco VideoTelePresenceCommunicationServer proxy 1 isdown for CiscoTelePresence SystemEX90, CiscoTelePresence SX80Codec and CiscoTelePresenceIntegrator PackageC90 and those areregistered to CiscoTelePresence VideoCommunicationServer proxy 2
Multiwayconferencewhencodec registersto Cisco VCSproxy 2
UCJ10.6PH2S.Video.SR.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 43
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedEX90 -> CiscoVCS (Cluster) ->SX80 Codec ->Add -> Cisco VCS-> MCU -> EX60(Multiway)
Verify whether theMultiway conferenceis workingsuccessfully whenCisco TelePresenceVideoCommunicationServer proxy 1 isdown for CiscoTelePresence SystemEX90, CiscoTelePresence SX80Codec and CiscoTelePresence SystemEX60 and those areregistered to CiscoTelePresence VideoCommunicationServer proxy 2
Multiwayconferenceamong EX60,EX90 and SX80Codec whenregisters toCisco VCSproxy 2
UCJ10.6PH2S.Video.SR.G.002
NilPassedIntegrator PackageC90 -> Cisco VCS(Cluster) -> SX80Codec -> Add ->Cisco VCS ->MCU -> SX20Quick Set(Multiway)
Verify whether theMultiway conferenceis workingsuccessfully whenCisco TelePresenceVideoCommunicationServer proxy 1 isdown for CiscoTelePresenceIntegrator PackageC90, CiscoTelePresence SX80Codec and CiscoTelePresence SX20Quick Set and thoseare registered toCisco TelePresenceVideoCommunicationServer proxy 2
Multiwayconferenceamong SX80Codec,IntegratorPackage C90and SX20QuickSet when CiscoVCS proxy 1 isdown
UCJ10.6PH2S.Video.SR.G.003
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan44
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX20 Quick Set(PresentationSharing) ->Unified CM ->SX10 Quick Set
Verify whether videoand presentation issent from CiscoTelePresence SX20Quick Set to CiscoTelePresence SX10Quick Set afterchanging the layout to‘Single’ in CiscoTelePresence SX20Quick Set, both areregistered with CiscoUnifiedCommunicationsManager
‘Single’presentationlayout in SX20Quick Setregistered withUnified CMduringpresentationsharing
UCJ10.6PH2S.Video.SR.G.004
NilPassedSX20 Quick Set ->Unified CM ->SX10 Quick Set(PresentationSharing)
Verify whether videoand presentation issent from CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set afterchanging the layout to‘Single’ in CiscoTelePresence SX20Quick Set, both areregistered with CiscoUnifiedCommunicationsManager
‘Single’presentationlayout for farend presentationin SX20 QuickSet registeredwith UnifiedCM
UCJ10.6PH2S.Video.SR.G.005
NilPassedSX20 Quick Set(PresentationSharing) -> CiscoVCS -> SX10Quick Set
Verify whether videoand presentation issent from CiscoTelePresence SX20Quick Set to CiscoTelePresence SX10Quick Set afterchanging the layout to‘Single’ in CiscoTelePresence SX20Quick Set, both areregistered with CiscoVideoCommunicationServer
‘Single’presentationlayout in SX20Quick Setregistered withCisco VCSduringpresentationsharing
UCJ10.6PH2S.Video.SR.G.006
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 45
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX20 Quick Set ->Cisco VCS ->SX10 Quick Set(PresentationSharing)
Verify whether videoand presentation issent from CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set afterchanging the layout to‘Single’ in CiscoTelePresence SX20Quick Set, both areregistered with CiscoVideoCommunicationServer
‘Single’presentationlayout for farend presentationin SX20 QuickSet registeredwith Cisco VCS
UCJ10.6PH2S.Video.SR.G.007
NilPassedNATo Verify that user isable to assign thestatic IP address forTouch Panel 10”
Assign the staticIP address forTouch Panel 10”
UCJ10.6PH2S.Video.SR.G.008
NilPassedNAVerify whether thename displayscorrectly whenchange theconfiguration name inchange configurationsetting by usingremote controller inSX series endpoints
Save theConfigurationChanges usingRemote controland Touch Panelin SX seriesendpoints
UCJ10.6PH2S.Video.SR.G.009
NilPassedSX80 Codec ->Unified CM ->EX90
Verify whether thecall is establishedfrom CiscoTelePresence SX80Codec to CiscoTelePresence SystemEX90 by changingthe default MTU sizevalue in the SX80
Make a callfrom SX80Codec to EX90by changing theDefault MTUsize Value
UCJ10.6PH2S.Video.SR.G.010
NilPassedSX80 Codec ->Unified CM ->MX300G2
Verify whether thecall is establishedfrom CiscoTelePresence SX80Codec to CiscoTelePresenceMX300G2 bychanging the defaultMTU size value inCisco TelePresenceSX80 Codec
Make a callfrom SX80Codec toMX300G2 bychanging theDefault MTUsize Value
UCJ10.6PH2S.Video.SR.G.011
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan46
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedSX10 Quick Set ->Unified CM ->MX300G2
Verify whether thecall is establishedfrom CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX300-G2 bychanging the defaultMTU size value in theSX10 Quick Set
Make a callfrom SX10Quick Set toMX300-G2 bychanging theDefault MTUsize value
UCJ10.6PH2S.Video.SR.G.012
NilPassedSX10 Quick Set ->Unified CM ->MX200G2
Verify whether thecall is establishedfrom CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200-G2 bychanging the defaultMTU size value inSX10 Quick Set
Make a callfrom SX10Quick Set toMX200-G2 bychanging theDefault MTUsize value
UCJ10.6PH2S.Video.SR.G.013
NilPassedNAVerify whether theconference name canbe given with lessthan 5 Japanesecharacters in MCU4510
Givingconference namewith less thanfive Japanesecharacters inMCU 4510
UCJ10.6PH2S.Video.SR.G.014
NilPassedNAVerify whether theconference name canbe given with morethan 5 Japanesecharacters in MCU4510
Givingconference namewith more thanfive Japanesecharacters inMCU 4510
UCJ10.6PH2S.Video.SR.G.015
NilPassedNAVerify whether theconferences can besorted in ascendingorder in MCU 4510
Sorting theconferences inascending orderin MCU 4510
UCJ10.6PH2S.Video.SR.G.016
NilPassedNAVerify whether theconferences can besorted in descendingorder in MCU 4510
Sorting theconferences indescendingorder in MCU4510
UCJ10.6PH2S.Video.SR.G.017
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 47
Test Results SummaryCisco TelePresence Video Communication Server
NilPassedNAVerify whether thelist conferencedisplays the correctlist for the actual dateand conference fromthe previous datedoesn’t show underlist conference whena conference isscheduled with timezone UTC+10(Brisbane)
List Conferencefor selected daydisplays thecorrect list
UCJ10.6PH2S.Video.SR.G.018
NilPassedNAVerify whether thelist conferencedisplays the correctlist for the actual dateand conference fromthe previous datedoesn’t show underlist conference whena conference isscheduled with timezone UTC+12(Auckland,Wellington)
List Conferencefor selected daydisplays thecorrect list aftera conference isscheduled withtime zoneUTC+12(Auckland,Wellington)
UCJ10.6PH2S.Video.SR.G.019
NilPassedNAVerify whether serialnumber of CiscoTelePresenceTX9000can be obtained byweb GUI
Getting serialnumber ofTX9000 throughWeb GUI
UCJ10.6PH2S.Video.SR.G.020
NilPassedNAVerify whether serialnumber of CiscoTelePresence System500-32 can beobtained by CLI
Getting serialnumber of500-32 throughCLI
UCJ10.6PH2S.Video.SR.G.021
CSCus75009FailedNAVerify whether thelanguage of SX10Quick Set can bechanged to Japanesethrough SetupAssistant usingRemote Control RC6
Changing thelanguage ofSX10 Quick Setto Japanesethrough setupassistant usingremote controlRC6
UCJ10.6PH2S.VCS.G.096
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan48
Test Results SummaryCisco TelePresence Video Communication Server
CSCus76235FailedNAVerify whether thelanguage of SX10Quick Set can bechanged to Arabicthrough SetupAssistant usingRemote Control RC6
Changing thelanguage ofSX10 Quick Setto Arabicthrough setupassistant usingremote controlRC6
UCJ10.6PH2S.VCS.G.097
Cisco Jabber for iPhone and iPadDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedCJW -> Unified CM1-> SIP Trunk ->Unified CM2 -> CJI
Verify whetherdesktop share isreceiving inJabber for iPhoneduring inter sitecall from CJW toCJI via SIP Trunkusing BFCPsuccessfully
Check desktopshare isreceiving inJabber foriPhone whileusing BFCP
UCJ10.6Ph2S.CJI.G.001
NilPassedNAVerify contactsearch are donesuccessfully bysearching URI ofthe Jabbercontacts in CiscoJabber for iPhone
Search Jabbercontacts inJabber foriPhone usingcontact URI
UCJ10.6Ph2S.CJI.G.020
NilPassedNAVerify chatmessages are sentsuccessfullybetween CiscoJabber for iPhoneand Cisco Jabberfor Windows
Send chats fromCisco Jabber foriPhone to Jabberfor Windows
UCJ10.6Ph2S.CJI.G.021
NilPassedNAVerify group chatis happenedbetween CiscoJabber forWindows, CiscoJabber for iPhone,and Cisco Jabberfor Android
Make a groupchat with CiscoJabber forWindows, CiscoJabber forAndroid andCisco Jabber foriPhone
UCJ10.6Ph2S.CJI.G.022
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 49
Test Results SummaryCisco Jabber for iPhone and iPad
NilPassedNAVerify files aresent successfullybetween CiscoJabber for iPhoneand Cisco JabberforWindows userwhile chatting
Send files whilechatting fromCisco Jabber foriPhone to CiscoJabber forWindows
UCJ10.6Ph2S.CJI.G.023
NilPassedNAVerify profile editin Jabber foriPhone by addingnew profile photoof the user whensign-in usingWebExMessenger
Check profileedit in Jabberfor iPhone byadding newprofile photowhen login inWebExMessenger
UCJ10.6Ph2S.CJI.G.018
NilPassedNAVerify capturesare sentsuccessfullybetween CiscoJabber for iPhoneand Cisco JabberforWindows userwhile chatting
Send captureswhile chattingfrom CiscoJabber foriPhone to CiscoJabber forWindows
UCJ10.6Ph2S.CJI.G.024
NilPassedNAVerify profileimage is updatedsuccessfully inJabber for iPhoneby changing theexisting image ofthe user whensign-in usingWebEx account
Check profileedit in Jabberfor iPhone byediting theexisting profilephoto whenlogin usingWebExMessenger
UCJ10.6Ph2S.CJI.G.017
NilPassedCJW -> Unified CM1-> SIP Trunk ->Unified CM2 ->CJIPad
Verify whetherdesktop share isreceiving inJabber for iPadduring inter sitecall from CJW toCJIPad via SIPTrunk usingBFCPsuccessfully
Check desktopshare isreceiving inJabber for iPadwhile usingBFCP
UCJ10.6Ph2S.CJIPad.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan50
Test Results SummaryCisco Jabber for iPhone and iPad
NilPassedNAVerify contactsearch are donesuccessfully bysearching URI ofthe Jabbercontacts in CiscoJabber for iPad
Search Jabbercontacts inJabber for iPadusing contactURI
UCJ10.6Ph2S.CJIPad.G.020
NilPassedNAVerify chatmessages are sentsuccessfullybetween CiscoJabber for iPadand Cisco Jabberfor Windows
Send chats fromCisco Jabber foriPad to Jabberfor Windows
UCJ10.6Ph2S.CJIPad.G.021
NilPassedNAVerify group chatis happenedbetween CiscoJabber forWindows, CiscoJabber for iPad,and Cisco Jabberfor Android
Make a groupchat with CiscoJabber forWindows, CiscoJabber for iPadand CiscoJabber forAndroid
UCJ10.6Ph2S.CJIPad.G.022
NilPassedNAVerify files aresent successfullybetween CiscoJabber for iPadand Cisco JabberforWindows userwhile chatting
Send files whilechatting fromCisco Jabber foriPad to CiscoJabber forWindows
UCJ10.6Ph2S.CJIPad.G.023
NilPassedNAVerify profile editin Jabber for iPadby adding newprofile photo ofthe user whensign-in usingWebExMessenger
Check profileedit in Jabberfor iPad byadding newprofile photowhen login inWebExMessenger
UCJ10.6Ph2S.CJIPad.G.018
NilPassedNAVerify capturesare sentsuccessfullybetween CiscoJabber for iPadand Cisco JabberforWindows userwhile chatting
Send captureswhile chattingfrom CiscoJabber for iPadto Cisco Jabberfor Windows
UCJ10.6Ph2S.CJIPad.G.024
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 51
Test Results SummaryCisco Jabber for iPhone and iPad
NilPassedNAVerify profileimage is updatedsuccessfully inJabber for iPad bychanging theexisting image ofthe user whensign-in usingWebEx account
Check profileedit in Jabberfor iPad byediting theexisting profilephoto whenlogin usingWebExMessenger
UCJ10.6Ph2S.CJIPad.G.017
NilPassedNAVerify whetherJabber for iPhoneis displaying theactive directoryuser when it isoffline in thecontacts list afterit is added to thecontacts of Jabbersuccessfully
Contact list ofJabber shoulddisplay theactive directoryuser after it isadded to thecontacts ofJabber
UCJ10.6Ph2S.CJI.SR.002
NilPassedNAVerify whether allthe options whichis available underthe settings pageof the Jabber foriPhone has beenshownsuccessfully
Check theoptions underthe settings willbe displayproperly
UCJ10.6Ph2S.CJI.SR.005
NilPassedNAVerify whetherJabber for iPadhas to display themessage/notification"you added acontact to yourfavorites list"after the contactshas been added tothe favorites listof Jabbersuccessfully
Check themessage/notificationafter contact hasbeen added inthe favorites listof Jabber
UCJ10.6Ph2S.CJIPad.SR.006
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan52
Test Results SummaryCisco Jabber for iPhone and iPad
NilPassedNAVerify whetherJabber for iPad isdisplaying theactive directoryuser when it isonline in thecontacts list afterit is added to thecontacts of Jabbersuccessfully
Contact list ofJabber shoulddisplay theactive directoryuser after it isadded to thecontacts ofJabber
UCJ10.6Ph2S.CJIPad.SR.001
NilPassedNAVerify whetherUser Namealready existsnotification has tobe shown whenagain add thealready addedusername in thecontacts list ofJabber for iPadsuccessfully
User Namealready existsnotification hasto be shownwhen usernameadded twice inthe contacts listof Jabber foriPad
UCJ10.6Ph2S.CJIPad.SR.008
NilPassedNAVerify whetherJabber for iPadstatus is showing"on a call" whenJabber for iPad 1made an activecall with Jabberfor iPad 2successfully
Jabber for iPadstatus should be"on a call" whenit is in an activecall
UCJ10.6Ph2S.CJIPad.SR.011
CSCut11162FailedNAVerify whethergroup chat inviteis coming inJapanese inJabber for iPhoneonce started agroup chat fromJabber forWindows toJabber for iPhoneand Jabber forAndroidSuccessfully
Check Groupchat invite iscoming inJapanese inJabber foriPhone
UCJ10.6Ph2S.CJI.G.100
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 53
Test Results SummaryCisco Jabber for iPhone and iPad
Cisco Jabber for AndroidDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedCJW -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->CJA
Verify whetherdesktop share isreceiving inJabber forAndroid duringinter site callfromCJW toCJAvia SIP Trunkusing BFCPsuccessfully
Check desktopshare isreceiving inJabber forAndroid whileusing BFCP
UCJ10.6Ph2S.CJA.G.001
NilPassedNAVerify contactnumber isupdatedsuccessfully inJabber forAndroid byediting theaddress of theuser when sign-inusing WebExaccount
Check profileedit in Jabber forAndroid byediting thecontact numberdetails whenlogin usingWebExMessenger
UCJ10.6Ph2S.CJA.G.016
NilPassedNAVerify contactsearch are donesuccessfully bysearching URI ofthe jabbercontacts in CiscoJabber forAndroid
Search Jabbercontacts inJabber forAndroid usingcontact URI
UCJ10.6Ph2S.CJA.G.020
NilPassedNAVerify profileaddress isupdatedsuccessfully inJabber forAndroid byediting theaddress of theuser when sign-inusing WebExaccount
Check profileedit in Jabber forAndroid byediting theaddress detailswhen login withWebExMessenger
UCJ10.6Ph2S.CJA.G.015
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan54
Test Results SummaryCisco Jabber for Android
NilPassedNAVerify chatmessages are sentsuccessfullybetween ciscojabber for androidand Cisco Jabberfor Windows
Send chats fromCisco Jabber forAndroid toJabber forWindows
UCJ10.6Ph2S.CJA.G.021
NilPassedNAVerify group chatis happenedbetween Ciscojabber forWindows, CiscoJabber foriPhone, andCiscoJabber forAndroid
Make a groupchat with CiscoJabber forWindows , CiscoJabber foriPhone andCisco Jabber forAndroid
UCJ10.6Ph2S.CJA.G.022
NilPassedNAVerify files aresent successfullybetween ciscojabber for androidand Cisco JabberforWindows userwhile chatting
Send files whilechatting fromCisco Jabber forAndroid to CiscoJabber forWindows
UCJ10.6Ph2S.CJA.G.023
NilPassedNAVerify profileedit in Jabber forAndroid byadding newprofile photo ofthe user whensign-in usingWebExMessenger
Check profileedit in Jabber forAndroid byadding newprofile photowhen login inWebExMessenger
UCJ10.6Ph2S.CJA.G.018
NilPassedNAVerify capturesare sentsuccessfullybetween ciscojabber for androidand Cisco JabberforWindows userwhile chatting
Send captureswhile chattingfrom CiscoJabber forAndroid to CiscoJabber forWindows
UCJ10.6Ph2S.CJA.G.024
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 55
Test Results SummaryCisco Jabber for Android
NilPassedNAVerify profileimage is updatedsuccessfully inJabber forAndroid bychanging theexisting image ofthe user whensign-in usingWebEx account
Check profileedit in Jabber forAndroid byediting theexisting profilephoto whenlogin withWebExMessenger
UCJ10.6Ph2S.CJA.G.017
CSCut22052FailedNAVerify whetherSecret and AngelEmoticon isshowing in jabberfor Androidwhilesending fromjabber forwindows tojabber for iPhoneand Jabber forAndroid duringgroup chatSuccessfully
Check Secretand AngelEmoticon isshowing inJabber forAndroid
UCJ10.6Ph2S.CJA.G.100
Cisco Jabber for WindowsDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedNAVerify location isdisplayedsuccessfully for theuser of CiscoJabber forWindows
Check locationdisplay inJabber forWindows
UCJ10.6Ph2S.CJW.G.020
NilPassedNAVerify FIPSsecurity pop up isdisplayed in Jabberfor Windows
Check FIPSsecurity pop upin Jabber forWindows
UCJ10.6Ph2S.CJW.G.033
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan56
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify locationdetails arepublishedsuccessfully for theuser of CiscoJabber forWindows whilemoving fromCluster A toCluster B
Check locationpublication inJabber forWindowswhilemoving fromCluster A toCluster B
UCJ10.6Ph2S.CJW.G.023
NilPassedNAVerify securitylabels aredisplayed in chatwindow of JabberforWindowswhilesending chats
Check IMsecurity labelsin Jabber forWindows
UCJ10.6Ph2S.CJW.G.026
NilPassedNAVerify files aresent successfullyfrom CJW1 toCJW2 and CJW3when CJW1,CJW2, CJW3 arein group chat
Send files fromCisco Jabberfor Windowswhen CJW1,CJW2 andCJW3 are ingroup chat
UCJ10.6Ph2S.CJW.G.038
NilPassedCJA -> UnifiedCM -> CJW
Verify calls are notallowed from CJAto Cisco Jabber forWindowswhen thestatus of Jabber forWindows is in "DoNot Disturb"
Make call fromCJA to CJWwhen CiscoJabber forWindows is in"Do NotDisturb" state
UCJ10.6Ph2S.CJW.G.057
NilPassedNAVerify chats aresaved in Microsoftoutlook by savingthe chat messagesin Jabber forWindows
Chat fromCisco Jabberfor Windowsand save thechat inMicrosoftOutlook
UCJ10.6Ph2S.CJW.G.049
NilPassedNAVerify alerts aredisplayed in JabberforWindowswhencontact hasbecome"Available" fromthe status "Offline/ Away / Do NotDisturb"
Alert whenuser status hasbecomeavailable inJabber forWindows
UCJ10.6Ph2S.CJW.G.065
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 57
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify editedlocation details arepublishedsuccessfully for theuser of CiscoJabber forWindows
Edit locationpublication inJabber forWindows
UCJ10.6Ph2S.CJW.G.022
NilPassedNAVerify locationdetails are notpublished afterdeleting thelocation detailsfrom the "location"page in Jabber forWindows
Delete locationpublication inJabber forWindows
UCJ10.6Ph2S.CJW.G.024
NilPassedNAVerify chats withemoticons are sentvia security labelswhile sendingchats from Jabberfor Windows
Send chats withemoticonsthroughsecurity labelsfrom Jabber forWindows
UCJ10.6Ph2S.CJW.G.030
NilPassedNAVerify FIPSconnection issueerror is displayedwhen Jabber forWindows islaunched with unsecure connection
Check FIPSconnectionissue whilelaunchingCisco JabberforWindows inFIPS mode
UCJ10.6Ph2S.CJW.G.035
NilPassedNAVerify files aresent successfullyfrom CJW to CJAand CJM whenCJW, CJA andCJM are in groupchat
Send files fromCisco Jabberfor Windowswhen CJW,CJA and CJMare in groupchat
UCJ10.6Ph2S.CJW.G.042
NilPassedNAVerify files aresent successfullyfrom CJW1 toCJW2 and CJMwhen CJW1,CJW2 and CJMare in persistentchat room
Send files fromCisco Jabberfor Windowswhen CJW1,CJW2 andCJM are inpersistent chat
UCJ10.6Ph2S.CJW.G.046
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan58
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify participantsare removedsuccessfully whiledoing group chatin Jabber forWindows
Removeparticipantsfrom groupchat in Jabberfor Windows
UCJ10.6Ph2S.CJW.G.054
NilPassedNAVerify CiscoJabber with thepop upmessage "Asoftware update isavailable" aredisplayedwhile wesigning into theJabber
CheckMandatoryupgrade whilesigning in theJabber forWindows
UCJ10.6Ph2S.CJW.G.061
NilPassedNAVerify instantWebEx meetingfrom Cisco Jabberfor Windows A toCisco Jabber forWindows B isinitiatedsuccessfully
Instant WebExmeeting fromCisco Jabberfor Windows
UCJ10.6Ph2S.CJWWM.SR.201
NilPassedNAVerify CiscoJabber forWindows Ainitiate WebExmeetingwith CiscoJabber for Mac Aand check CiscoJabber for Macable to decline themeetingsuccessfully
Decline themeeting fromCisco Jabberfor Mac
UCJ10.6Ph2S.CJWWM.SR.217
NilPassedNAVerify thatmeeting details areviewed correctly inCisco Jabber forWindows B
Meeting detailsinMeetings tabin CJW
UCJ10.6Ph2S.CJMWM.SR.033
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 59
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify CiscoJabber forWindows Ainitiate WebExmeetingwith CiscoJabber forWindows B andcheck Cisco Jabberfor Windows Aable to share thescreen duringmeeting
Validatedesktop shareworks duringWebExmeeting inCJW
UCJ10.6Ph2S.CJWWM.SR.219
NilPassedNAVerify that CiscoJabber forWindows sharesfiles to CiscoJabber for Macduring WebExmeetingsuccessfully
Sharing filesfrom CJW toCisco Jabberfor Mac duringWebExmeeting
UCJ10.6Ph2S.CJWWM.SR.319
NilPassedNAVerify that CiscoJabber forWindows A are inWebEx meetingwith Cisco Jabberfor Windows Band Cisco Jabberfor Windows Aends the meetingsuccessfully
End theWebExmeeting fromCisco Jabberfor Windows
UCJ10.6Ph2S.CJWWM.SR.316
NilPassedNAVerify the messagein Cisco Jabber forMac WebExscreen when thehost (Cisco Jabberfor WindowsA)leaves themeeting
Validate themessage inCisco Jabberfor MacWebEx screenwhen the hostleaves themeeting
UCJ10.6Ph2S.CJWWM.SR.315
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan60
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify that CiscoJabber forWindows A (host)initiate WebExmeetingwith CiscoJabber forWindows B andCisco Jabber forWindows A passthe ball to CiscoJabber forWindows B andshares the file
Host passingthe ball toCisco Jabberfor Windows
UCJ10.6Ph2S.CJWWM.SR.312
NilPassedNAVerify that CiscoJabber forWindows Ainitiate instantWebEx meeting toCisco Jabber forWindows B andusers able to sendchat messagesduring WebExmeeting
Chat betweentwo users whenCJW A initiateinstant WebExmeeting toCJW B
UCJ10.6Ph2S.CJWWM.SR.310
NilPassedNAVerify thatJapanese name aredisplayed inCWMS user pagesuccessfully
Display ofJapaneseusername inCWMS
UCJ10.6Ph2S.CJWWM.SR.007
NilPassedNAVerify CiscoJabber forWindows Asuccessfullyinitiate WebExmeetingwith CiscoJabber forWindows B andvalidate the statusof the users
Start a WebExmeeting fromCJWA to CJWB and checkthe presencestatus
UCJ10.6Ph2S.CUP.SR.014
NilPassedNAVerify CiscoJabber forWindows initiatechat with CiscoJabber for Macsuccessfully andverify the presencestatus of both theusers
IM chatbetween CJWand CJM users
UCJ10.6Ph2S.CUP.SR.010
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 61
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify CiscoJabber forWindows initiatechat with CiscoJabber for iPadsuccessfully andverify the presencestatus of both theusers
Initiate IM chatbetween CJWand CJiPadusers andvalidatepresence status
UCJ10.6Ph2S.CUP.SR.011
NilPassedJabber forWindows ->Unified CM ->Cisco UnityConnection ->Jabber for iPhone
Verify whethervoice messagescan be sent fromJabber forWindows to Jabberfor iPhonesuccessfully
Send Voicemail fromJabber forWindows toJabber foriPhone
UCJ10.6Ph2S.CJW.SR.006
NilPassedJabber forWindows ->Unified CM ->Cisco UnityConnection ->Jabber for iPhone
Verify whetherMark as read/Markas unread can ableto do afterretrieved the voicemessages fromJabber forWindows to Jabberfor iPhonesuccessfully
Mark asread/Mark asunread can ableto do afterretrieved thevoicemessagesfrom Jabber forWindows toJabber foriPhone
UCJ10.6Ph2S.CJW.SR.010
NilPassedNAVerify whethercontacts which hasbeen added in thecreated contactgroup 1 can bemove to thecontact group 2 inthe Jabber forWindowssuccessfully
Move thecontacts fromone contactgroup toanother contactgroup in Jabberfor Windows
UCJ10.6Ph2S.CJW.SR.015
NilPassedNAVerify whetherAlert notificationwill be appearwhen the contactwhich has beenadded in thecreated contactgroup becomesavailable status inthe Jabber forWindowssuccessfully
Alert notifywhen thecontact whichhas been addedin the created
UCJ10.6Ph2S.CJW.SR.017
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan62
Test Results SummaryCisco Jabber for Windows
NilPassedNAVerify whethernewly createdcontact group canbe rename in theJabber forWindowssuccessfully
Rename thenew contactgroup namewhich iscreated inJabber forWindows
UCJ10.6Ph2S.CJW.SR.013
NilPassedNAVerify whethernew contact groupname can be addedin the Jabber forWindows and thenadd the users underthe group namesuccessfully
Create newcontact groupname and addthe users underthe group name
UCJ10.6Ph2S.CJW.SR.012
Cisco Jabber for MacDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedNAVerify user'spresence status isnot displayed inmy profile pageafter the user hasbeen logged in toCisco Jabber forMac withphone-only Mode
Check presencestatus shouldnot display inphone onlymode whileclicking viewmy profile
UCJ10.6Ph2S.CJM.G.002
NilPassedNAVerify presencestatus is notdisplayed incontacts page ofCisco Jabber forMac while addingnew Cisco Jabberfor Android user
Add contacts(which is in IM& Presencestate in CJA) toJabber for Macin Phone-onlymode
UCJ10.6Ph2S.CJM.G.014
NilPassedCJM -> Unified CM-> Phone B
Verify callprocessing isestablishedbetween Jabberfor Mac and IPPhone inPhone-only mode
Make an intracluster call fromJabber for Macto DX650 inphone-onlymode
UCJ10.6Ph2S.CJM.G.009
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 63
Test Results SummaryCisco Jabber for Mac
NilPassedNAVerify newcontacts are addedsuccessfully in thecontact list whileadding contactsusing customcontacts
Add newcontacts usingcustom contacts
UCJ10.6Ph2S.CJM.G.051
NilPassedNAVerify displayname is displayedin Japanese whilechanging thecustom contactdisplay name inJapanese
Edit customcontact displayname inJapanese
UCJ10.6Ph2S.CJM.G.063
NilPassedNAVerify user whichis created byMicrosoft Lync isable to login intoJabber for Mac
CheckMicrosoft Lyncusers login forCJM
UCJ10.6Ph2S.CJM.G.092
NilPassedNAVerify chats aresent between Lyncuser of CiscoJabber for Macand Cisco Jabberfor windows user
Send chats fromCJMLync usersto CJW
UCJ10.6Ph2S.CJM.G.099
NilPassedNAVerify userpresence status isnot displayed afterthe user has beenlogged in toJabber for Macwith phone-onlyMode
Check thepresence statusof the user inJabber for Macwith phone onlymode
UCJ10.6Ph2S.CJM.G.001
NilPassedCJM -> Unified CM-> CJI/CJIP
Verify presencestatus is notdisplayed in CiscoJabber for Mac(Phone onlymode) whilemaking call fromCJM to IOSdevices
Make call fromCJM (which isin Phone onlymode) to IOSdevices (whichare in IM andPresencemode)
UCJ10.6Ph2S.CJM.G.016
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan64
Test Results SummaryCisco Jabber for Mac
NilPassedNAVerify customcontacts aremoved from onecontact group(G1) to anothercontact group(G2)
Move customcontacts fromone group toanother group
UCJ10.6Ph2S.CJM.G.052
NilPassedNAVerify selectedcustom contactsare removedsuccessfully fromthe contacts list
Removecontacts whichare createdusing customcontacts
UCJ10.6Ph2S.CJM.G.053
NilPassedCJM -> Unified CM-> CJW
Verify desktopsharing is workedwhile establishingcall from CiscoJabber for Mac toCisco Jabber forwindows
Desktop sharingin CJM duringcall in progresswith CJW
UCJ10.6Ph2S.CJM.G.102
NilPassedCJM -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->Phone B
Verify intercluster call isestablished fromCisco Jabber forMac to IP phonevia SIP trunk
Make an intercluster call fromCisco Jabber forMac to IPPhone
UCJ10.6Ph2S.CJM.G.010
NilPassedNAVerify customstatus is changedwhile adding newcustom status forLync user inJabber for Mac
Check customstatus for Lyncusers in CJM
UCJ10.6Ph2S.CJM.G.095
CSCut16237FailedNAVerify group chatinvitenotifications aredisplayingcorrectly in CiscoJabber for Mac
Title Checkgroup chatinvitenotification inCisco Jabber forMac
UCJ10.6Ph2S.CJM.G.121
Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 65
Test Results SummaryCisco TelePresence Multipoint Control Unit
NilPassedNAVerify whetherthe conferencename can begiven with lessthan 5 Japanesecharacters inMCU5310whichuses CiscoTelePresenceVideoCommunicationServer as SIPRegistrar
Givingconferencename with lessthan fiveJapanesecharacters inMCU 5310
UCJ10.6PH2S.MCU.G.001
NilPassedNAVerify whetherthe conferencename can begiven with morethan 5 Japanesecharacters inMCU5310whichuses CiscoTelePresenceVideoCommunicationServer as SIPRegistrar
Givingconferencename withmore than fiveJapanesecharacters inMCU 5310
UCJ10.6PH2S.MCU.G.002
NilPassedNAVerify whetherthe conferencescan be sorted inascending orderin MCU 5310
Sorting theconferences inascendingorder in MCU5310
UCJ10.6PH2S.MCU.G.003
NilPassedNAVerify whetherthe conferencescan be sorted indescending orderin MCU 5310
Sorting theconferences indescendingorder in MCU5310
UCJ10.6PH2S.MCU.G.004
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan66
Test Results SummaryCisco TelePresence Multipoint Control Unit
NilPassedSX10 Quick Set ->Unified CM -> SIPTrunk ->MCU4510
Verify whetherCiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager can joinin a Meet meconference inCiscoTelePresenceMCU 4510successfully
Meet meconferencefrom SX10Quick Setregistered withUnified CM toMCU 4510
UCJ10.6PH2S.MCU.G.005
NilPassedSX80 Codec ->Unified CM -> SIPTrunk ->MCU4510
Verify whetherCiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager can joinin a Meet meconference inCiscoTelePresenceMCU 4510
Meet meconferencefrom SX80Codecregistered withUnified CM toMCU 4510
UCJ10.6PH2S.MCU.G.006
NilPassedDX70 -> UnifiedCM -> SIP Trunk ->MCU 4510
Verify whetherCisco DX70registered withCisco UnifiedCommunicationsManager canparticipate inMeet meconference inCiscoTelePresenceMCU 4510successfully
Meet meconferencefrom DX70registered withUnified CM toMCU 4510
UCJ10.6PH2S.MCU.G.007
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 67
Test Results SummaryCisco TelePresence Multipoint Control Unit
NilPassedDX80 -> UnifiedCM -> SIP Trunk ->MCU 4510
Verify whetherCisco DX80registered withCisco UnifiedCommunicationsManager canparticipate inMeet meconference inCiscoTelePresenceMCU 4510successfully
Meet meconferencefrom DX80registered withUnified CM toMCU 4510
UCJ10.6PH2S.MCU.G.008
NilPassedDX70 -> UnifiedCM -> SIP Trunk ->Cisco VCS ->MCU4510
Verify whetherCisco DX70registered withCisco UnifiedCommunicationsManager canparticipate inMeet meconference inCiscoTelePresenceMCU 4510registered withCiscoTelePresenceVideoCommunicationsServer using SIPRegistrar
Meet meconferencefrom DX70registered withUnified CM toMCU 4510registered withCisco VCSusing SIPRegistrar
UCJ10.6PH2S.MCU.G.009
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan68
Test Results SummaryCisco TelePresence Multipoint Control Unit
NilPassedDX80 -> UnifiedCM -> SIP Trunk ->Cisco VCS ->MCU4510
Verify whetherCisco DX80registered withCisco UnifiedCommunicationsManager canparticipate inMeet meconference inCiscoTelePresenceMCU 4510registered withCiscoTelePresenceVideoCommunicationsServer using SIPRegistrarsuccessfully
Meet meconferencefrom DX80registered withUnified CM toMCU 4510registered withCisco VCSusing SIPRegistrar
UCJ10.6PH2S.MCU.G.010
Cisco TelePresence Management SuiteDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedCisco TMS ->MCU 4510 ->Cisco VCS ->EX90 -> SX80Codec -> SX10Quickset
Verify whether theExternally HostedConference usingCisco TelePresenceMCU 4510 workssuccessfully in CiscoTelePresenceManagement Suitefor endpointsregistered in CiscoTelePresence VideoCommunicationServer
ExternallyHostedConferenceusing MCU4510
UCJ10.6Ph2S.TMS.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 69
Test Results SummaryCisco TelePresence Management Suite
NilPassedCisco TMS ->MCU 4510 -> SIPTrunk -> UnifiedCM -> EX90 ->SX80 Codec ->SX10 Quickset
Verify whether theExternally HostedConference usingCisco TelePresenceMCU 4510 workssuccessfully in CiscoTelePresenceManagement Suitefor endpointsregistered in CiscoUnifiedCommunicationsManager
ExternallyHostedConferenceusing MCU4510 forendpointsregistered toUnified CM
UCJ10.6Ph2S.TMS.G.002
NilPassedCisco TMS ->Cisco TS 7010 ->Cisco VCS ->EX90 -> SX80Codec -> SX10Quickset
Verify whether theExternally HostedConference usingCisco TelePresenceServer 7010 workssuccessfully in CiscoTelePresenceManagement Suitefor endpointsregistered in CiscoTelePresence VideoCommunicationServer
ExternallyHostedConferenceusing Cisco TS7010
UCJ10.6Ph2S.TMS.G.003
NilPassedNAVerify whetherbooking confirmationemail is sent to allusers involved in theconference in CiscoTelePresenceManagement Suite
Bookingconfirmationemail messagein Cisco TMS
UCJ10.6Ph2S.TMS.G.004
NilPassedCisco TMS ->Cisco VCS ->Conductor -> CiscoTS 7010 -> EX90(Main Participant)-> SX80 Codec ->SX10 QuickSetCisco TMS ->Cisco VCS ->Conductor -> CiscoTS 7010 -> EX90(Main Participant)-> SX10 QuickSet
Verify whether themain participantremains unchangedin a conferenceinitiated by SmartScheduler after aparticipant isremoved from theconference in CiscoTelePresenceManagement Suite
No change inMainParticipantafter removinga participantduringconference inCisco TMS
UCJ10.6Ph2S.TMS.G.005
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan70
Test Results SummaryCisco TelePresence Management Suite
NilPassedCisco TMS ->Conductor -> CiscoTS 7010 -> CiscoVCS -> EX90(Main Participant)-> SX80 Codec ->SX10 QuickSetCisco TMS ->Conductor -> CiscoTS 7010 -> CiscoVCS -> EX90(Main Participant)-> SX80 Codec ->SX10 QuickSet ->SX20 QuickSet
Verify whether themain participantremains unchangedin a conferenceinitiated by SmartScheduler after aparticipant is addedto the conference inCisco TelePresenceManagement Suite
No change inMainParticipantafter adding aparticipantduringconference inCisco TMS
UCJ10.6Ph2S.TMS.G.006
NilPassedNAVerify whetherwarning message isdisplayed afteradding a systemlicense of more than5000 systems inCisco TelePresenceManagement Suite
Systemlicenses limitedto 5000systems
UCJ10.6Ph2S.TMS.G.007
NilPassedCisco TMS ->Conductor -> CiscoTS onVM ->CiscoVCS -> EX90 ->SX80 Codec ->SX10Quickset (4thparticipant shouldbe restricted)
Verify whether thenumber ofparticipants isrestricted to 3 for ascheduled conferencehosted by CiscoTelePresence Serveron VM and managedby CiscoTelePresenceConductor in CiscoTelePresenceManagement Suite
Restrictnumber ofparticipants to3 in ascheduledconferencehosted byCisco TS onVM managedby Conductor
UCJ10.6Ph2S.TMS.G.008
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 71
Test Results SummaryCisco TelePresence Management Suite
NilPassedCisco TMS ->Conductor ->MCU4510 -> Cisco VCS-> EX90 -> SX80Codec -> SX10Quickset (4thparticipant shouldbe restricted)
Verify whether thenumber ofparticipants isrestricted to 3 for ascheduled conferencehosted by CiscoTelePresence MCU4510 and managedby CiscoTelePresenceConductor in CiscoTelePresenceManagement Suite
Restrictnumber ofparticipants to3 in ascheduledconferencehosted byMCU 4510managed byConductor
UCJ10.6Ph2S.TMS.G.009
NilPassedNAVerify whether thepicture layout modecan be set duringbooking a conferencemanaged by CiscoTelePresenceConductor in CiscoTelePresenceManagement Suite
Picture LayoutMode for aconferencemanaged byConductor
UCJ10.6Ph2S.TMS.G.010
NilPassedCisco TMS ->Conductor ->MCU4510 -> Cisco VCS-> EX90 -> SX80Codec -> SX10Quickset
Verify whether thelock/unlock for aconference hosted byCisco TelePresenceMCU 4510 andmanaged by CiscoTelePresenceConductor isavailable inConference ControlCenter of CiscoTelePresenceManagement Suite
Lock/Unlock aconference fora conferencehosted byMCU4510 andmanaged byConductor inConferenceControl Center
UCJ10.6Ph2S.TMS.G.011
NilPassedCisco TMS ->Conductor ->MCU4510 -> Cisco VCS-> EX90
Verify whether themeeting endnotification forconferences hostedby CiscoTelePresence MCU4510 and managedby CiscoTelePresenceConductor are placedon the top center ofthe screen
Meeting endnotificationsfor conferencesmanaged byConductor inCisco TMS
UCJ10.6Ph2S.TMS.G.012
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan72
Test Results SummaryCisco TelePresence Management Suite
NilPassedNAVerify whether theencryption optionkey installed in CiscoTelePresenceMX200-G2 is visiblein CiscoTelePresenceManagement Suite
Encryptionoption key ofMX200-G2visible in CiscoTMS
UCJ10.6Ph2S.TMS.G.013
NilPassedNAVerify whether thePremium Resolutionoption key installedin CiscoTelePresenceMX200-G2 is visiblein CiscoTelePresenceManagement Suite
PremiumResolutionoption key ofMX200-G2visible in CiscoTMS
UCJ10.6Ph2S.TMS.G.014
NilPassedNAVerify whether guestparticipant with aguest pin can beadded to theCollaborationMeeting Room underCisco TelePresenceManagement SuiteUser Portal
GuestParticipant inCollaborationMeeting Room
UCJ10.6Ph2S.TMS.G.015
NilPassedNAVerify whetherchairpersonparticipant with achairperson pin canbe added to theCollaborationMeeting Room underCisco TelePresenceManagement SuiteUser Portal
ChairpersonParticipant inCollaborationMeeting Room
UCJ10.6Ph2S.TMS.G.016
Cisco TelePresence ConductorDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 73
Test Results SummaryCisco TelePresence Conductor
NilPassedNAVerify whether thecurrent userpassword isauthorized beforechanging theadministratorpassword in CiscoTelePresenceManagement Suite
Authenticationwhen changingadministratorpassword
UCJ10.6Ph2S.TC.G.001
NilPassedNAVerify whether thecurrent userpassword isauthorized beforecreating a new userin CiscoTelePresenceManagement Suite
Authenticationwhen creatingnew user
UCJ10.6Ph2S.TC.G.002
NilPassedNAVerify whetherTelePresence MCUpool in a servicepreference can bemarked forscheduling in CiscoTelePresenceConductor
Markscheduling forTelePresenceMCU pool in aServicePreference
UCJ10.6Ph2S.TC.G.003
NilPassedNAVerify whetherTelePresence Serverpool in a servicepreference can bemarked forscheduling in CiscoTelePresenceConductor
Markscheduling forTelePresenceServer pool in aServicePreference
UCJ10.6Ph2S.TC.G.004
NilPassedNAVerify whetherMCU 4510 markedfor scheduling in theTelePresence MCUService preference inCisco TelePresenceConductor is usedfor when schedulinga conference inCisco TelePresenceManagement Suite
MarkedschedulingMCU 4510Pool used forscheduling inConductor
UCJ10.6Ph2S.TC.G.005
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan74
Test Results SummaryCisco TelePresence Conductor
NilPassedNAVerify whetherCisco TelePresenceServer 7010 markedfor scheduling in theTelePresence ServerService preference inCisco TelePresenceConductor is usedfor when schedulinga conference inCisco TelePresenceManagement Suite
MarkedschedulingCisco TS 7010Pool used forscheduling inConductor
UCJ10.6Ph2S.TC.G.006
NilPassedNAVerify whether guestparticipant detailsadded under CiscoTelePresenceManagement SuiteProvisioningExtension is visibleunder Status ->CollaborationMeeting Rooms inCisco TelePresenceConductor
GuestParticipantfromCollaborationMeeting Roomdisplayed inConductor
UCJ10.6Ph2S.TC.G.007
NilPassedNAVerify whetherchairpersonparticipant detailsadded under CiscoTelePresenceManagement SuiteProvisioningExtension is visibleunder Status ->CollaborationMeeting Rooms inCisco TelePresenceConductor
ChairpersonParticipantfromCollaborationMeeting Roomdisplayed inConductor
UCJ10.6Ph2S.TC.G.008
NilPassedCisco TMSPE ->CollaborationMeeting Room ->Conductor -> CiscoTS 7010 -> EX90(Host) -> SX10QuickSet (guest)
Verify whether guestcan be specified towait till the hostjoins the conferencein the CiscoTelePresenceConductorProvisioning APIusing CiscoTelePresence Server7010 as theconference bridge
Guest to waitfor a host tojoin theconference
UCJ10.6Ph2S.TC.G.009
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 75
Test Results SummaryCisco TelePresence Conductor
NilPassedCisco TMSPE ->CollaborationMeeting Room ->Conductor -> CiscoTS 7010 -> SX10QuickSet (guest) ->EX90 (Host)
Verify whether guestcan be specified tojoins the conferencebefore the host doesin the CiscoTelePresenceConductorProvisioning APIusing CiscoTelePresence Server7010 as theconference bridge
Guest to jointhe conferencebefore the hostjoins
UCJ10.6Ph2S.TC.G.010
NilPassedNAVerify whether themenu path for IPsettings has beenchanged to System-> NetworkInterfaces -> IP inCisco TelePresenceConductor
Menu path forIP settings inConductor
UCJ10.6Ph2S.TC.G.011
NilPassedNAVerify whethermultiple SIP trunkdestinations can beadded forrendezvousconference in CiscoTelePresenceConductor
Support formultiple SIPtrunkdestinations
UCJ10.6Ph2S.TC.G.012
Cisco TelePresence ServerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan76
Test Results SummaryCisco TelePresence Server
NilPassedMX200-G2,MX300-G2(PresentationSharing) & EX90 ->Unified CM -> SIPTrunk -> Cisco VCS-> Cisco TS 7010
To verify that useris able to do meetme videoconferencebetween videoendpointsregistered withUnified CM andShare thePresentationwhilein VideoConference usingCiscoTelePresenceServer 7010registered withCisco VCS as aSIP Registrar
Meet me videoconferencebetween videoendpointsregistered withUnified CMand Share thePresentationwhile in VideoConference
UCJ10.6PH2S.TS.G.001
NilPassedMX300-G2,MX200-G2(PresentationSharing) & SX80Codec -> Cisco VCS-> Cisco TS 7010
To verify that useris able to do meetme videoconferencebetween videoendpointsregistered withCisco VCS andShare thePresentationwhilein VideoConference usingCiscoTelePresenceServer 7010registered withCisco VCS as aSIP Registrar
Meet me videoconferencebetween videoendpointsregistered withCiscoVCS andshare thepresentationwhile in videoconference
UCJ10.6PH2S.TS.G.002
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 77
Test Results SummaryCisco TelePresence Server
NilPassedSX10Quick Set (EMuser, PresentationSharing) -> UnifiedCM -> SIP Trunk ->Cisco TS 7010
To verify that useris able to initiatethe meet meconference fromSX10 Quick Setregistered withUnified CMusingEM enabled uservia CiscoTelePresenceServer 7010 andshare thepresentationwhilein videoconference
Initiate themeet meconferencefrom SX10Quick Setregistered withUnified CMusing EMenabled uservia Cisco TS7010 and sharethepresentationwhile in videoconference
UCJ10.6PH2S.TS.G.003
NilPassedMX300-G2,MX200-G2(PresentationSharing) & SX80Codec (H.323) ->Cisco VCS -> CiscoTS 7010
To verify that useris able to initiatethemeetme videoconferencebetweenMX200-G2,MX300-G2 &SX80 Codecregistered withCisco VCS as aH.323 endpointsand sharing thepresentation
Initiate themeet me videoconferencebetween videoendpointsregistered withCisco VCS asa H.323endpoint andShare thePresentation
UCJ10.6PH2S.TS.G.004
NilPassed8945 & SX80 Codec(PresentationSharing) -> UnifiedCM -> SIP Trunk ->Cisco TS 70108945 -> Unified CM-> DX80 ->Park/Retrieve
To verify that useris able to park themeet me videoconference fromCisco Unified IPPhone 8945 andretrieve theconference inDX80 Codecwhile sharing thepresentation usingCisco TS 7010
Park the meetme videoconferencefrom 8945registered withUnified CMand Retrievethe conferencefrom DX80Codec whilesharing thepresentation
UCJ10.6PH2S.TS.G.005
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan78
Test Results SummaryCisco TelePresence Server
NilPassed8945 & EX90(PresentationSharing) -> UnifiedCM -> SIP Trunk ->Cisco TS 70108945 -> Unified CM-> SX10 Quick Set(EM user) ->Park/Retrieve
To verify that useris able to park themeet me videoconference fromCisco Unified IPPhone 8945 andretrieve it on EMenabled SX10Quick Set whilesharing thepresentation viaCiscoTelePresenceServer 7010
Park the meetme videoconferencefrom 8945registered withUnified CMand Retrieve iton EM enabledSX10 QuickSet whilesharing thepresentation
UCJ10.6PH2S.TS.G.006
NilPassedMX200-G2, SX10&SX80 ->Unified CM-> Conductor ->Cisco TelePresenceServer on VM
To verify that useris able to do meetme conferencebetweenMX200-G2, SX10Quick Set &SX80 Codec andcheck the exitlobby screenmessage afterdisconnectingconference
Make a meetme conferencebetweenMX200-G2,SX10 & SX80Codec andcheck the exitlobby screen
UCJ10.6PH2S.TS.G.007
NilPassedMX200-G2, EX90&SX20 Quick Set ->Unified CM ->Conductor -> CiscoTelePresence Serveron VM
Verify that exitlobby screenmessage fordisconnectparticipants viaweb interface
Exit lobbyscreen forDisconnect viaWeb Interface
UCJ10.6PH2S.TS.G.008
NilPassedCisco TMS ->Conductor -> CiscoTelePresence Serveron VM -> UnifiedCM -> MX200-G2,EX90&SX20QuickSet
Verify that exitlobby screenmessage fordisconnectscheduledconference
Exit lobbyscreen fordisconnectscheduledconference
UCJ10.6PH2S.TS.G.009
NilPassedNAVerify whethernettap controls viaweb interface ofCiscoTelePresenceServer 7010works fine
Nettap controlsvia Webinterface ofCisco TS 7010
UCJ10.6PH2S.TS.G.010
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 79
Test Results SummaryCisco TelePresence Server
NilPassedMX200-G2 ->Unified CM -> SIPTrunk -> Cisco TS7010
Verify theenhanced onscreen messagebackground withCiscoTelePresenceServer 7010during a meet meconference call
Check theon-screenmessagebackground
UCJ10.6PH2S.TS.G.011
NilPassedSX10 Quick Set,8831 & 7961 ->Unified CM -> SIPTrunk -> Cisco TS7010
Verify thatdisplaying iconfor number ofoff-screenparticipants usingCiscoTelePresenceServer 7010
Displayingicon fornumber ofoff-screenparticipantsusing CiscoTelePresenceServer 7010
UCJ10.6PH2S.TS.G.012
NilPassedSX10 Quick Set ->Unified CM -> SIPTrunk -> Cisco TS7010
Verify thatdisplaying audioavatar symbol foraudio conferencefrom SX10 QuickSet using CiscoTS 7010
Make an audioconferencefrom SX10Quick Setusing Cisco TS7010
UCJ10.6PH2S.TS.G.013
Cisco Jabber GuestDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->MX300-G2
To Verify thatuser is able tomake a video callfrom Jabber guestclient on Androidto CiscoTelePresenceMX300-G2 viaCiscoExpressway-E
Make a videocall from Jabberguest client onAndroid toMX300-G2 viaCiscoExpressway-E
UCJ10.6PH2S.JG.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan80
Test Results SummaryCisco Jabber Guest
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX80
To Verify thatuser is able tomake a video callfrom Jabber guestclient on Androidto Cisco DX80via CiscoExpressway-E
Make a videocall from Jabberguest client onAndroid toDX80via CiscoExpressway-E
UCJ10.6PH2S.JG.G.002
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX70
To Verify thatuser is able tomake a video callfrom Jabber guestclient on Androidto Cisco DX70via CiscoExpressway-E
Make a videocall from Jabberguest client onAndroid toDX70via CiscoExpressway-E
UCJ10.6PH2S.JG.G.003
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX80 (PresentationSharing)
To Verify thatuser is able toshare Presentationin video callbetween Jabberguest client onAndroid andCisco DX80 viaCiscoExpressway-E
Presentationsharing in videocall betweenJabber guestclient onAndroidand DX80 viaCiscoExpressway-E
UCJ10.6PH2S.JG.G.004
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX70 (PresentationSharing)
To Verify thatuser is able toshare Presentationin video callbetween Jabberguest client onAndroid andCisco DX70 viaCiscoExpressway-E
PresentationSharing in videocall betweenJabber guestclient onAndroidand DX70 viaCiscoExpressway-E
UCJ10.6PH2S.JG.G.005
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX80
To Verify thatuser is able to doadhoc call fromJabber guestclient on Androidto Cisco DX80via CiscoExpressway-E
Adhoc video calllink to DX80from CiscoJabber GuestClient onAndroid
UCJ10.6PH2S.JG.G.006
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 81
Test Results SummaryCisco Jabber Guest
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX70
To Verify thatuser is able to doadhoc call fromJabber guestclient on Androidto Cisco DX70via CiscoExpressway-E
Adhoc video calllink to DX70from Ciscojabber GuestClient onAndroid
UCJ10.6PH2S.JG.G.007
NilPassedJabber guest client(Android) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->DX80 -> Transfer ->Unified CM ->DX70
To Verify thatuser is able tomake a call fromJabber guestclient on Androidto Cisco DX80and transfer a callto Cisco DX70via CiscoExpressway-E
Make a videocall from JabberGuest Client onAndroid toDX80and transfervideo call toDX70
UCJ10.6PH2S.JG.G.008
NilPassedJabber guest client(Android), DX70 &DX80 -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->MCU 4510 -> MeetMe conference
To Verify thatuser is able tomake a meet meconference callfrom Jabber guestclient on Android,DX70 & DX80using CiscoTelePresenceMCU 4510 viaCiscoExpressway-E
Make a meet meconference callbetween Jabberguest client onAndroid, DX70& DX80 usingMCU 4510 viaCiscoExpressway-E
UCJ10.6PH2S.JG.G.009
NilPassedJabber guest client(Android), DX80 &SX10 Quick Set ->Cisco Expressway-E-> CiscoExpressway-C ->Unified CM ->MCU5310 -> Meet Meconference
To Verify thatuser is able tomake a meet meconference callbetween Jabberguest client onAndroid, DX80&SX10 Quick Setusing CiscoTelePresenceMCU 5310 viaCiscoExpressway-E
Make a meet meconference callbetween Jabberguest client onAndroid, DX80& SX10 QuickSet using MCU5310 via CiscoExpressway-E
UCJ10.6PH2S.JG.G.010
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan82
Test Results SummaryCisco Jabber Guest
NilPassedJabber guest client(Android), DX80 &MX300-G2 -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->Cisco TS 7010 ->Meet Me conference
To Verify thatuser is able tomake a meet meconference callbetween Jabberguest client onAndroid, DX80&MX300-G2 usingCiscoTelePresenceServer 7010 viaCiscoExpressway-E
Make a meet meconference callbetween Jabberguest client onAndroid, DX80& MX300-G2using Cisco TS7010 via CiscoExpressway-E
UCJ10.6PH2S.JG.G.011
NilPassedJabber guest client(Android),DX70(PresentationSharing) & DX80 ->Cisco Expressway-E-> CiscoExpressway-C ->Unified CM ->MCU4510 -> Meet Meconference
To Verify thatuser is able tomake a meet meconference callfrom Jabber guestclient on Android,DX70 & DX80using CiscoTelePresenceMCU 4510 viaCiscoExpressway-E
PresentationSharing while inmeet meconference callbetween Jabberguest client onAndroid, DX70& DX80 usingMCU 4510 viaCiscoExpressway-E
UCJ10.6PH2S.JG.G.012
NilPassedJabber guest client(Android),DX80(PresentationSharing) & SX10Quick Set -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->MCU 5310
To Verify thatuser is able to doPresentationSharing while inmeet meconference callbetween Jabberguest client onAndroid, DX80&SX10 Quick Setusing CiscoTelePresenceMCU 5310 viaCiscoExpressway-E
PresentationSharing while inmeet meconference callbetween Jabberguest client onAndroid, DX80& SX10 QuickSet using MCU5310 via CiscoExpressway-E
UCJ10.6PH2S.JG.G.013
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 83
Test Results SummaryCisco Jabber Guest
NilPassedJabber guest client(Android), DX80 &MX300-G2(PresentationSharing) -> CiscoExpressway-E ->Cisco Expressway-C-> Unified CM ->Cisco TS 7010
To Verify thatuser is able to doPresentationSharing while inmeet meconference callbetween Jabberguest client onAndroid, DX80&MX300-G2 usingCiscoTelePresenceServer 7010 viaCiscoExpressway-E
PresentationSharing while inmeet meconference callbetween Jabberguest client onAndroid, DX80& MX300-G2using Cisco TS7010 via CiscoExpressway-E
UCJ10.6PH2S.JG.G.014
Cisco Collaboration ExpresswayDefectsStatusCall Component
FlowDescriptionTitleLogical ID
NilPassedEX60 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM-> CiscoTelePresenceMX300-G2
Verify whethervideo call fromCisco TelePresenceSystem EX60registered inUnified CM viaCollaborationEDGE to CiscoTelePresenceMX300-G2 isestablishedsuccessfully andchecking SDP 183message throughcall trace
Making videocall from EX60registered inUnified CM viaCollaborationEDGE to CiscoTelePresenceMX300-G2 andchecking theSDP 183messagethrough calltrace
UCJ10.6PH2S.Edge.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan84
Test Results SummaryCisco Collaboration Expressway
NilPassedCisco TelePresenceEX60 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM-> CiscoTelePresenceMX300-G2
Verify whethervideo call fromCisco TelePresenceSystem EX90registered inUnified CM viaCollaborationEDGE to CiscoTelePresenceMX300-G2 isestablishedsuccessfully andchecking SDP 183message throughcall trace
Making videocall from EX90registered inUnified CM viaCollaborationEDGE to CiscoTelePresenceMX300-G2 andchecking theSDP 183messagethrough calltrace
UCJ10.6PH2S.Edge.G.002
NilPassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> EX60 ->Presentation Sharing
Verify whether thepresentationsharing from CiscoTelePresenceSystemEX90 loginas ExtensionMobility user andregistered withCisco UnifiedCommunicationsManager viacollaborationEDGE to CiscoTelePresenceSystem EX60works successfully
Presentationsharing fromEX90 login asEM user viaEDGE
UCJ10.6PH2S.Edge.G.003
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 85
Test Results SummaryCisco Collaboration Expressway
NilPassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->SX80 Codec ->Presentation Sharing
Verify whether thepresentationsharing from CiscoTelePresenceSystem EX90logged in asExtensionMobilityuser and registeredwith Cisco UnifiedCommunicationsManager cluster1via CollaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster2through SIP trunkworks successfully
Makinginter-clustervideo call andsharingpresentationfrom EX90logged in asEM user
UCJ10.6PH2S.Edge.G.004
NilPassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS1 -> UnifiedCM -> SIP Trunk ->Cisco VCS2 ->SX80 Codec
Verify whether thevideo call fromCisco TelePresenceSystem EX90logged in asExtensionMobilityuser viaCollaborationEDGE to CiscoTelePresence SX80Codec registeredwith CiscoTelePresenceVideoCommunicationServer workssuccessfully
Making videocall from EX90login as EMuser via EDGEto SX80 Codecregistered withCisco VCS
UCJ10.6PH2S.Edge.G.005
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan86
Test Results SummaryCisco Collaboration Expressway
NilPassedEX90 -> Cisco VCSExpressway -> CiscoVCS -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->SX80 Codec
Verify whether thevideo call fromCisco TelePresenceSystem EX90registered withCisco UnifiedCommunicationsManager cluster1via collaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster2through SIP trunkworks successfully
Makinginter-clustervideo call fromEX90 viaEDGE
UCJ10.6PH2S.Edge.G.006
Cisco IP Phone Validation
Cisco IP PhonesDefectsStatusCall Component
flowDescriptionTitleLogical ID
NilPassedIP Phone A ->Unified CM1 -> IPPhone B
Verify that callon 88XX seriesIP Phone getsattendedautomaticallyusing AutoAnswer withheadset optionwhen headset isconnected to88XX series IPPhone
Answer thecall on 88XXseries IPPhone usingAuto Answerwith Headset
UCJ10.6Ph2S.CUCM.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 87
Test Results SummaryCisco IP Phone Validation
NilPassedIP Phone A ->Unified CM1 -> IPPhone B
Verify that callon 88XX seriesIP Phone getsattendautomaticallyusing AutoAnswer withSpeaker phoneoption whenSpeaker phoneis ON in 88XXseries IP Phone
Answer thecall on 88XXseries IPPhone usingAuto Answerwith Speakerphone
UCJ10.6Ph2S.CUCM.G.002
NilPassedIP Phone A ->Unified CM2 -> SIPTrunk -> CUBE ->SIP Trunk -> UnifiedCM1 -> IP Phone B
Verify that callon 88XX seriesIP Phonecoming throughCUBE havingSIP Trunk withUnified CM1and SIP Trunkwith UnifiedCM2 getsattendautomaticallyusing AutoAnswer withheadset optionwhen headset isconnected to88XX series IPPhone
Answer theinter-clustercall on 88XXseries IPPhone comingthroughCUBEhavingSIP Trunkwith UnifiedCM1 and SIPTrunk withUnified CM2using AutoAnswer withHeadsetoption
UCJ10.6Ph2S.CUCM.G.003
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan88
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM2 -> ICTTrunk-> CUBE ->ICT Trunk ->Unified CM1 -> IPPhone B
Verify that callon 88XX seriesIP Phonecoming throughCUBE havingICT Trunk withUnified CM1and ICT Trunkwith UnifiedCM2 getsattendautomaticallyusing AutoAnswer withheadset optionwhen headset isconnected to88XX series IPPhone
Answer theinter-clustercall on 88XXseries IPPhone comingthroughCUBEhavingICT Trunkwith UnifiedCM1 and ICTTrunk withUnified CM2using AutoAnswer withHeadsetoption
UCJ10.6Ph2S.CUCM.G.006
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that callscoming to88XX series IPPhoneforwardingsuccessfully todestinationwhile using CallForward AllFeature
Forward thecalls comingto 88XXseries IPPhone usingCall ForwardAll Feature
UCJ10.6Ph2S.CUCM.G.012
NilPassedIP Phone A -> IPPhone B (9951) ->Unified CM1 -> SIPTrunk -> CUBE ->SIP Trunk -> UnifiedCM2 -> IP Phone C
Verify that callscoming throughCUBE havingSIP Trunk withUnified CM1and SIP Trunkwith UnifiedCM2 to 88XXseries IP Phoneforwardingsuccessfully todestinationwhile using CallForward AllFeature
Forward theinter-clustercalls comingthroughCUBEhavingSIP Trunkwith UnifiedCM1 and SIPTrunk withUnified CM2to 88XXseries IPPhone usingCall ForwardAll Feature
UCJ10.6Ph2S.CUCM.G.014
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 89
Test Results SummaryCisco IP Phones
NilPassedIP Phone A -> IPPhone B (9951) ->Unified CM1 -> ICTTrunk -> CUBE ->ICT Trunk ->Unified CM2 -> IPPhone C
Verify that callscoming throughCUBE havingICT Trunk withUnified CM1and ICT Trunkwith UnifiedCM2 to 88XXseries IP Phoneforwardingsuccessfully todestinationwhile usingConditionalCall ForwardingFeature
Forward thecalls comingthroughCUBEhavingICT Trunkwith UnifiedCM1 and ICTTrunk withUnified CM2to 88XXseries IPPhone usingConditionalCallForwardingFeature
UCJ10.6Ph2S.CUCM.G.018
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that userable to park anactive call on88XX series IPPhone andretrieve theparked call onanother IPPhonesuccessfully
Park an activecall on 88XXseries IPPhone
UCJ10.6Ph2S.CUCM.G.022
NilPassedIP Phone A ->Unified CM1 -> SIPTrunk -> CUBE ->SIP Trunk -> UnifiedCM2 -> IP Phone B-> Unified CM2 ->IP Phone C
Verify that userable to park aninter clusteractive callcoming throughCUBE havingSIP Trunk withUnified CM1and SIP Trunkwith UnifiedCM2 on 88XXseries IP Phoneand retrieve theparked call onanother IPPhonesuccessfully
Park an intercluster activecall comingthroughCUBEhavingSIP Trunkwith UnifiedCM1 and SIPTrunk withUnified CM2on 88XXseries IPPhone
UCJ10.6Ph2S.CUCM.G.023
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan90
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that userable to Dparkan active call on88XX series IPPhone andretrieve theparked callusing Featurebuttonsuccessfully onanother IPPhone
Park an activecall on 88XXseries IPPhone usingassisteddirected callpark
UCJ10.6Ph2S.CUCM.G.027
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that userable to redialthe mostrecently dialedphone numberfrom 88XXseries IP Phoneand connectionestablishedsuccessfully
Call the mostrecentlydialed Phonenumber from88XX seriesIP Phoneusing Redialbutton
UCJ10.6Ph2S.CUCM.G.054
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that userable to attendshared line callin 88XX seriesIP Phonesuccessfully
Attend sharedline call in88XX seriesIP Phone
UCJ10.6Ph2S.CUCM.G.059
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that usercan able tomake call from88XX series IPPhone to anyother IP Phoneusing SpeedDial Button
Place callfrom 88XXseries IPPhone usingSpeed DialButton
UCJ10.6Ph2S.CUCM.G.060
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 91
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM1 -> SIPTrunk -> CUBE ->SIP Trunk -> UnifiedCM2 -> IP Phone B
Verify that userable to makecall from 88XXseries IP Phoneto 9951 IPPhone throughCUBE havingSIP Trunk withUnified CM 1and having SIPTrunk withUnified CM 2using SpeedDial Button
Place callfrom 88XXseries IPPhone usingSpeed DialButton to9951 IPPhonethroughCUBEhavingSIP Trunkwith UnifiedCM 1 andhaving SIPTrunk withUnified CM 2
UCJ10.6Ph2S.CUCM.G.061
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that userable to transferthe call from88XX series IPPhone toanother numbersuccessfully
Transfer thecall from88XX seriesIP Phone toanothernumber
UCJ10.6Ph2S.CUCM.G.070
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that userable to swap thecalls availablein 88XX seriesIP Phone
Swap the callscoming to88XX seriesIP Phone
UCJ10.6Ph2S.CUCM.G.076
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that userable to makecalls from88XX series IPPhone usingWeb Dialer
Make callfrom 88XXseries IPPhone usingWeb Dialer
UCJ10.6Ph2S.CUCM.G.077
NilPassedIP Phone A ->Unified CM -> IPPhone B
Allow a user toadd to aremotely activecall on a sharedline, using thebuilt-in bridgeat the targetdevice
Single ButtoncBarge froman IP Phone(88xx) to acall originatedby the sharedline
UCJ10.6Ph2S.CUCM.G.083
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan92
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> IP Phone B-> Unified CM2 ->Unity Connection
Verify that acall isredirected byImmediateDivert to avoice-messagingmail box that isspecified in thevoice-messagingprofileassociated withthe calling party
Inter-UnifiedCM Call withImmediateDivert byCalling Party
UCJ10.6Ph2S.CUCM.G.097
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that the88xx IP Phonehandles theDND feature ina Cisco UnifiedIP Phonesuccessfully.
Activate DoNot Disturbfeature on anIPPhone(88xx)
UCJ10.6Ph2S.CUCM.G.099
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that the88xx IP Phonehandles theDND feature ina Cisco UnifiedIP Phone withshared line IPphonessuccessfully
Activate DoNot Disturbfeature on ashared line
UCJ10.6Ph2S.CUCM.G.101
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify theability to makea basic IP-to-IPcall afterlogging into theCisco UnifiedCall ManagerExtensionMobility
Basic IP-to-IPCallFunctionalityafter Logginginto UnifiedCall ManagerExtensionMobility
UCJ10.6Ph2S.CUCM.G.102
NilPassedNAVerifying theuser ID of alogged in EMuser in callmanagerdisplayingcorrect
Display ofEM user IDcorrectly inCUCM page
UCJ10.6Ph2S.CUCM.G.104
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 93
Test Results SummaryCisco IP Phones
NilPassedIP Phone C ->Unified CM -> IPPhone A -> UnifiedCM -> IP Phone B
Verifying thatthe IP Phone(88xx) handlesthe hold/resumewhen in sharedlinesuccessfully
Put a call onhold when inshared lineand resumethe call
UCJ10.6Ph2S.CUCM.G.110
NilPassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> IP Phone B
To verify thatthe IP Phoneshandles the holdreversioninter-clustersuccessfully inset duration
Holdreversion -Inter clustercalls using IPPhones (88xx)via SIP Trunk
UCJ10.6Ph2S.CUCM.G.112
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify that theCisco UnifiedIP Phones(88xx) handlesthe lineindicationsstatussuccessfullywhen in sharedline
Verify lineindicationstatus usingIP Phones(88xx) whenin shared line
UCJ10.6Ph2S.CUCM.G.120
NilPassedIP Phone A ->Unified CM ->Meet-me number ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C ->Unified CM -> IPPhone D
Verify that thePhone D (88xxPhone) joins ameet meconference callwhere PhoneA,Phone B andPhone C isalready in aconference call
Call madefrom 88xxPhone to ameet meconferencenumber tojoin aconference
UCJ10.6Ph2S.CUCM.G.122
NilPassedNAVerify that thePhone B (88xxPhone) try tojoins a meet meconference callwhere theconference hosthas not yetinitiated theconference calland Phone Bhears a busytone
Call madefrom 88xxPhone to joinmeet meconferenceand busy toneheard
UCJ10.6Ph2S.CUCM.G.126
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan94
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that IPPhone (88xx)handles themutesuccessfullywhen in sharedline
Call to sharedIP Phones(88xx) andMute the call
UCJ10.6Ph2S.CUCM.G.135
NilPassedIP Phone A ->Unified CM ->Wireless IP Phone A(792x)
To verifywhether both88xx IP Phoneand 792xPhones areregistered andattempting acall from 88xxIP Phone to792xG.
Make callbetween IPPhone A(88xx) to792xG Phone
UCJ10.6Ph2S.CUCM.G.141
NilPassediPhone Client (CJI)-> Unified CM1 ->SIP Trunk -> UnifiedCM2 -> IP Phone A
Verify that88xx IP Phonehandles callwith iPhoneClient
Make aninter-clustercall via SIPTrunk froman iPad Clientto 88xx IPPhone
UCJ10.6Ph2S.CUCM.G.151
NilPassedAndroid Client(CJA) -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->IP Phone A
Verify that88xx IP Phoneshandlesinter-cluster callvia SIP Trunkwith AndroidClient
Make aninter-clustercall via SIPTrunk froman AndroidClient to 88xxIP Phones
UCJ10.6Ph2S.CUCM.G.152
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify that thepark toast issuccessful onCisco IP Phones88xx while inon-hook
Park toast onCisco IPPhone 88xxduringon-hook
UCJ10.6Ph2S.CUCM.G.153
NilPassedIP Phone A ->Unified CM -> IPPhone B (Line2) ->Unified CM -> IPPhone C (Line2)
Verify whetherthe user canable to park andretrieve the callfrom line2 ofCisco IP Phone88xx
Call Park andRetrieval atline2 of CiscoIP Phone88xx
UCJ10.6Ph2S.IPPhone.SR.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 95
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM -> IPPhone B (SharedLine) -> Unified CM-> IP Phone C
Verify whetherthe user canable to park andretrieve the callfrom Cisco IPPhone 88xxwhen it is inshared line withthe other IPPhone
Call Park atCisco IPPhone 88xxwhen it is inShared Line
UCJ10.6Ph2S.IPPhone.SR.002
NilPassedIP Phone A ->Unified CM -> IPPhone B (SharedLine) -> Unified CM-> IP Phone C
Verify whetherthe user canable to view thecall history inCisco IP Phone88xx after callpark at Cisco IPPhone 88xxwhen it is inshared line
Check for callhistory inCisco IPPhone 88xxafter call parkwhen inshared line
UCJ10.6Ph2S.IPPhone.SR.003
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whetherthe DirectedCall Park BLFis configuredand monitoredin Cisco IPPhone 88xx
Directed CallPark BLF atCisco IPPhone 88xx
UCJ10.6Ph2S.IPPhone.SR.011
NilPassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whetherthe label createdfor DirectedCall Park BLFis successfullydisplayed inCisco IP Phone88xx
New Labelfor DirectedCall ParkBLF at CiscoIP Phone88xx
UCJ10.6Ph2S.IPPhone.SR.012
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify whetherthe call historyshown on CiscoIP Phone isvalid when callis held at CiscoIP Phone 88xxwhen in sharedline
Check callhistory inCisco IPPhone 88xxduring holdwhen inshared line
UCJ10.6Ph2S.IPPhone.SR.016
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan96
Test Results SummaryCisco IP Phones
NilPassedIP Phone A ->Unified CM -> IPPhone B (Line1) ->Unified CM -> IPPhone B (Line2) ->Unified CM -> IPPhone D
Verify whetherthe call historyshown on line1of Cisco IPPhone 88xx isvalid when callon both thelines are in heldstate
Check callhistory atline1 of CiscoIP Phone88xx whencalls on boththe lines areheld
UCJ10.6Ph2S.IPPhone.SR.021
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify whetherthe held call isresumed inCisco IP Phone88xx when inshared line
Resume theheld callusing linebutton whenCisco IPPhone 88xx isin shared line
UCJ10.6Ph2S.IPPhone.SR.024
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify whetherthe held call isresumed inCisco IP Phone88xx when inshared line withmultiple phones
Resume theheld callusing linebutton whenCisco IPPhone 88xx isin shared linewith multipleIP Phones
UCJ10.6Ph2S.IPPhone.SR.031
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify whetherthe hold andresume on line1of Cisco IPPhone 88xx issuccessful whenin shared line
Hold andresume theshared linecall on Line1of Cisco IPPhone 88xxvia softkey
UCJ10.6Ph2S.IPPhone.SR.040
NilPassedIP Phone A ->Unified CM -> IPPhone B
Verify whetherthe hold andresume onCisco IP Phone88xx issuccessful whenit is configuredwith multiplelines
Hold andresume thecall via softkey whenCisco IPPhone 88xx isconfiguredwith multiplelines
UCJ10.6Ph2S.IPPhone.SR.042
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 97
Test Results SummaryCisco IP Phones
NilPassedIP Phone C ->Unified CM -> IPPhone A (SharedLine) -> IP Phone D
Verify that CallTransfer issuccessful fromone of the IPPhone 88xx inShared Line toother IP Phonein non-sharedline
Verify CallTransfer in88xx when inShared Line
UCJ10.6Ph2S.IPPHONE.SR.103
NilPassedIP Phone C ->Unified CM -> IPPhone A (SharedLine)IP Phone D ->Unified CM -> IPPhone A -> UnifiedCM -> IP Phone E
Verify that CallForward asBusy enabled inShared Linephones 88xxand forwardingthe call tospecifieddestination
Set CallForward asBusy in 88xxwhen inShared Line
UCJ10.6Ph2S.IPPHONE.SR.105
NilPassedIP Phone E ->Unified CM -> IPPhone A (SharedLine)IP Phone F ->Unified CM -> IPPhone A -> UnifiedCM -> IP Phone C(Shared Line)
Verify whetherthe user is ableto set callforward in 88xxto other sharedline phoneswhen one of theshared linephones are busy
Set CallForward in88xx to otherShared LinePhone whenShared LinePhones areBusy
UCJ10.6Ph2S.IPPHONE.SR.106
NilPassedIP Phone C ->Unified CM -> IPPhone A (SharedLine) -> UnityConnection -> IPPhone C
Verify whetherthe user is ableto leave avoicemail toPhone3 (88xx)when threephones in ashared line setall callforwarded tovoicemail
Leave avoicemail toShared Linephones whenCall ForwardAll toVoicemail setin one of theshared linephones (88xx)
UCJ10.6Ph2S.IPPHONE.SR.108
NilPassedIP Phone C ->Unified CM -> IPPhone D -> IP PhoneA
Verify thebehavior whentwo SharedLine Phones(88xx) are insame PickGroup and pickup the call fromShared Linephone
Shared LinePhones (88xx)are in PickGroup
UCJ10.6Ph2S.IPPHONE.SR.110
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan98
Test Results SummaryCisco IP Phones
NilPassedIP Phone C ->Unified CM -> IPPhone A (SharedLine )IP Phone D ->Unified CM -> IPPhone A (SharedLine)
Verify the callbacknotification andcalls whenShared Linephones (88xx)are busy andcall back whenavailable.
Call Backwhen SharedLine Phones(88xx) arebusy
UCJ10.6Ph2S.IPPHONE.SR.113
NilPassedIP Phone C ->Unified CM -> IPPhone E -> UnifiedCM -> IP Phone D(Line 2)
Verify Transferthe Call tosecond line inone of SharedLine Phones(88xx)
Transfer theCall to secondline in one ofShared LinePhones (88xx)
UCJ10.6Ph2S.IPPHONE.SR.115
NilPassedIP Phone C ->Unified CM -> IPPhone A (SharedLine)
Make call toShared Linephone (88xx)by using speeddial
Initiate call toShared Linephone (88xx)by usingspeed dial
UCJ10.6Ph2S.IPPHONE.SR.118
NilPassedReal IP Phone A ->Unified CM ->Shared Line DN (49Virtual Phones +Real IP Phone B)
Verify that theLine Status onReal IP Phoneis successfulwhen call madeto the SharedLineDN, whereDN shared withVirtual IPPhones
Line Status onReal IP Phonewhen callmade to theShared LineDN, whereDN sharedwith VirtualIP Phones
UCJ10.6Ph2S.Automation.G.001
NilPassedReal IP Phone A ->Unified CM ->Shared Line DN (49Virtual Phones +Real IP Phone B)
Verify that theLine Status onReal IP Phoneis successfulwhen call madeto the SharedLine DN isheld, where DNshared withVirtual IPPhones
Line Status onReal IP Phonewhen call isheld
UCJ10.6Ph2S.Automation.G.002
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 99
Test Results SummaryCisco IP Phones
CSCus84536Failed78xx IP Phone ->Unified CM -> 88xxIP Phone
Verify whetherthe call forwarddetails aredisplayed in88xx phoneswhen aforwarded callis answered in88x phones
Call Forwarddetails in88xx phones
UCJ10.6Ph2S.CUCM.G.203
CSCus88792Failed78xx IP Phone ->Unified CM -> 88xxIP Phone -> UnifiedCM -> 9951 IPPhone
Verify whetherthe callconference toastis displayedcorrectly in88xx IP Phoneswhen 88xx IPPhone is inconference
Conferencetoastmessages in88xx IPPhones
UCJ10.6Ph2S.CUCM.G.204
CSCut22770FailedNAVerify theCisco WebDialer pagedisplay inJapaneseEnvironmentwhen makingcall to IPPhones usingWeb Dialer
Cisco WebDialer stringswhen makingcall from IPPhone usingWeb Dialer
UCJ10.6Ph2S.CUCM.G.205
Cisco Prime Collaboration
Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto get the ordernotification after enablingthe Extension Mobilityservice in ServiceProvisioning page
Order notification forExtension Mobilityservice in ServiceProvisioning page
UCJ10.6Ph2S.CPC-PR.G.001
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan100
Test Results SummaryCisco Prime Collaboration
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto add the User ID inJapanese language inUser Provisioning page
Adding new User ID inJapanese language inUser Provisioning page
UCJ10.6Ph2S.CPC-PR.G.002
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto see the correct numberof remaining User IDafter deleting existingUser ID in UserProvisioning page
Check the total numberof User ID after User IDdeletion in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.003
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto enter message inJapanese language in usernote
Input the notes inJapanese language andcheck whether it isretrieved
UCJ10.6Ph2S.CPC-PR.G.004
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto see the modified username after saving inSelf-Care
User name aftermodifying and saving inSelf-Care
UCJ10.6Ph2S.CPC-PR.G.005
NilPassedGo to Deploy -> UserProvisioning and verifywhether user is able tolaunch Self-Care optionby using quick viewanchor in UserProvisioning page
Launch Self-Care optionby using quick viewanchor in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.006
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto view the User ID is inascending order in UserProvisioning page
Check for the User ID isin ascending order
UCJ10.6Ph2S.CPC-PR.G.007
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ablesee user role afterupdating user role inmange authorization roleoption in Manage Userpage
Check user role afterupdating in ManageUser page
UCJ10.6Ph2S.CPC-PR.G.008
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 101
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto close the User ID byusing close icon in UserID search box aftergetting the search result
Searching User ID andclose User ID by usingclose icon at User IDbox in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.009
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto select country by usingtoggle picker button inAdditional Settings underAdd User page
Select country usingtoggle picker button inAdditional Settingsunder Add User page
UCJ10.6Ph2S.CPC-PR.G.010
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto Reset and Closecolumn option in UserProvisioning page
Reset and Close columnoption in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.011
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto swap the User IDmenu to last name menuand vice versa in UserProvisioning page
Swap the User ID menuto last name menu inUser Provisioning page
UCJ10.6Ph2S.CPC-PR.G.012
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto get error notificationwhen alphabeticcharacters are entered inPin Management underUser Settings
Error notification whenalphabetic characters areentered in PinManagement underUserSettings
UCJ10.6Ph2S.CPC-PR.G.013
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto select service area byusing toggle pickeroption
Select service area byusing toggle pickeroption in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.014
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto select only one UserID for new service inUser Provisioning page
Restriction of multipleUser ID in UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.015
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan102
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto swap the User IDmenu to startedmenu andvice versa in UserProvisioning page
Swap the menu optionin bulk move status
UCJ10.6Ph2S.CPC-PR.G.016
NilPassedGo to Design > UserProvisioning Setup andverify whether the user isable to copy the existingservice area template inUser Provisioning page
Copying existingService Area templates
UCJ10.6Ph2S.CPC-PR.G.017
NilPassedGo to Deploy -> UserProvisioning and verifywhether the user is ableto get error notificationwhile entering nonnumeric values in Indexbox at Speed Dials optionunder Phone Settings
Error notification whileentering non numericcharacters in Index boxat Phone Settings
UCJ10.6Ph2S.CPC-PR.G.018
NilPassedGo to Deploy -> BatchProvisioning and verifywhether the user is ableto search an existingBatch Project name inBatch Provisioning page
Search an existing BatchProject name in searchbox
UCJ10.6Ph2S.CPC-PR.G.019
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for7911 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 7911Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.020
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 103
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template forAnalog Phone EndpointType in Phone ButtonTemplate Configurationpage and see the updatedDefault Template inPhone Button TemplateConfiguration page
Update DefaultTemplate for AnalogPhone Endpoint Type inPhone Button TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.021
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template forCisco Jabber for AndroidPhone Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for CiscoJabber for AndroidPhone Endpoint Type inPhone Button TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.022
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template forCisco Jabber for iPhonePhone Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for CiscoJabber for iPhone PhoneEndpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.023
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan104
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template forCisco Jabber for DesktopEndpoint Type in PhoneButton TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for CiscoJabber for DesktopEndpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.024
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for8841 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 8841Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.025
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for8831 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 8831Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.026
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 105
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for9951 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 9951Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.027
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for8861 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 8861Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.028
NilPassedGo to Administration ->System Configuration ->Phone Button Templatesand verify whether theuser is able to update theDefault Template for6941 Endpoint Type inPhone Button TemplateConfiguration page andsee the updated DefaultTemplate in PhoneButton TemplateConfiguration page
Update DefaultTemplate for 6941Endpoint Type in PhoneButton TemplateConfiguration page
UCJ10.6Ph2S.CPC-PR.G.029
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan106
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->Users and Device AccessManagement ->InfrastructureConfigurationPermissions and verifywhether the user is ableto update PermissionProfile Configuration andsee the updatedPermission Profile inInfrastructureConfigurationPermissions page
Update PermissionProfile Configurationafter adding inInfrastructureConfigurationPermissions page
UCJ10.6Ph2S.CPC-PR.G.030
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to setApplication logging levelas high for Unified CMand browse the logs toview the requiredinformation
Set Unified CMApplication Logginglevel as high and browsethe logs
UCJ10.6Ph2S.CPC-PR.G.031
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to setApplication logging levelas Normal for UnifiedCM and browse the logsto view the requiredinformation
Set Unified CMApplication Logginglevel as Normal andbrowse the logs
UCJ10.6Ph2S.CPC-PR.G.032
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to setApplication logging levelas Detail for Unified CMand browse the logs toview the requiredinformation
Set Unified CMApplication Logginglevel as Detail andbrowse the logs
UCJ10.6Ph2S.CPC-PR.G.033
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 107
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to setApplication logging levelas high for UnityConnection and browsethe logs to view therequired information
Set Unity ConnectionApplication Logginglevel as high and browsethe logs
UCJ10.6Ph2S.CPC-PR.G.034
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to setApplication logging levelas Normal for UnifiedCM IM & Presence andbrowse the logs to viewthe required information
Set Unified CM IM andPresence ApplicationLogging level asNormal and browse thelogs
UCJ10.6Ph2S.CPC-PR.G.035
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to set NICElogging level as high forUnified CM and browsethe logs to view therequired information
Set Unified CM NICELogging level as highand browse the logs
UCJ10.6Ph2S.CPC-PR.G.036
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to set NICElogging level as Normalfor Unified CM andbrowse the logs to viewthe required information
Set Unified CM NICELogging level asNormal and browse thelogs
UCJ10.6Ph2S.CPC-PR.G.037
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to set NICElogging level as Detail forUnified CM and browsethe logs to view therequired information
Set Unified CM NICELogging level as Detailand browse the logs
UCJ10.6Ph2S.CPC-PR.G.038
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan108
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to set NICElogging level as Normalfor Unity Connection andbrowse the logs to viewthe required information
Set Unity ConnectionNICE Logging level asNormal and browse thelogs
UCJ10.6Ph2S.CPC-PR.G.039
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to set NICElogging level as High forUnified CM IM &Presence and browse thelogs to view the requiredinformation
Set Unified CM IM andPresenceNICELogginglevel as High andbrowse the logs
UCJ10.6Ph2S.CPC-PR.G.040
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in ApacheLogs for Unified CMapplication successfully
Browse and checkApache Logs forUnified CM
UCJ10.6Ph2S.CPC-PR.G.041
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in PostgresLogs for Unified CMapplication successfully
Browse and checkPostgres Logs forUnified CM
UCJ10.6Ph2S.CPC-PR.G.042
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in ApacheLogs for UnityConnection applicationsuccessfully
Browse and checkApache Logs for UnityConnection
UCJ10.6Ph2S.CPC-PR.G.043
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 109
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in PostgresLogs for UnityConnection applicationsuccessfully
Browse and checkPostgres Logs for UnityConnection
UCJ10.6Ph2S.CPC-PR.G.044
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in ApacheLogs for Unified CM IMand Presence applicationsuccessfully
Browse and checkApache Logs forUnified CM IM andPresence
UCJ10.6Ph2S.CPC-PR.G.045
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to browse andcheck the associatedinformation in PostgresLogs for Unified CM IMand Presence applicationsuccessfully
Browse and checkPostgres Logs forUnified CM IM andPresence
UCJ10.6Ph2S.CPC-PR.G.046
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forDeployment Informationthrough Logging andShowTech page byselecting the Range
Generate and downloadlogs for DeploymentInformation by selectingDuration
UCJ10.6Ph2S.CPC-PR.G.047
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan110
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forOrder through Loggingand ShowTech page byselecting the Range
Generate and downloadlogs for Order byselecting Duration
UCJ10.6Ph2S.CPC-PR.G.048
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forService Action throughLogging and ShowTechpage by selecting theRange
Generate and downloadlogs for Service Actionby selecting Duration
UCJ10.6Ph2S.CPC-PR.G.049
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forSystem through Loggingand ShowTech page byselecting the Range
Generate and downloadlogs for System byselecting Duration
UCJ10.6Ph2S.CPC-PR.G.050
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forDeployment Informationthrough Logging andShowTech page byselecting the Range asnumber of days
Generate and downloadlogs for DeploymentInformation by selectingDuration as number ofdays
UCJ10.6Ph2S.CPC-PR.G.051
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 111
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forOrder through Loggingand ShowTech page byselecting the Range asnumber of days
Generate and downloadlogs for Order byselecting Duration asnumber of days
UCJ10.6Ph2S.CPC-PR.G.052
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forService Action throughLogging and ShowTechpage by selecting theRange as number of days
Generate and downloadlogs for Service Actionby selecting Duration asnumber of days
UCJ10.6Ph2S.CPC-PR.G.053
NilPassedGo to Administration ->System Maintenance ->Logging and ShowTechand verify whether theuser is able to generateand download logs forSystem through Loggingand ShowTech page byselecting the Range asnumber of days
Generate and downloadlogs for System byselecting Duration asnumber of days
UCJ10.6Ph2S.CPC-PR.G.054
NilPassedGo to Administration ->System Maintenance ->Updates and verifywhether the user is ableto add updated SSLCertificate for CiscoPrime CollaborationProvisioning throughApplication SoftwareUpdates page
Add updated SSLCertificate for CPCProvisioning
UCJ10.6Ph2S.CPC-PR.G.055
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan112
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Design -> GettingStartedWizard and verifywhether the user is ableto add and sync all theusers created in LDAPusing Getting StartedWizard through CiscoPrime CollaborationProvisioning
Add and sync usersfrom LDAP usingGetting Started Wizardthrough CPCProvisioning
UCJ10.6Ph2S.CPC-PR.G.056
NilPassedGo to Design -> GettingStartedWizard and verifywhether the user enablesauto provisioningservices to particular Roleusing Getting StartedWizard and users createdusing the specified roleare getting the AutoProvisioned Services asdefault
Enable AutoProvisioning Services toparticular Role usingGetting Started Wizard
UCJ10.6Ph2S.CPC-PR.G.057
NilPassedGo to Design ->Infrastructure Setup andverify whether the user isable to add CiscoTelePresenceManagement Suite(TMS)using Infrastructure Setupthrough Cisco PrimeCollaborationProvisioning
Add TelePresenceManagementSuite(TMS) usingInfrastructure Setupthrough CPCProvisioning
UCJ10.6Ph2S.CPC-PR.G.058
NilPassedGo to Design ->Infrastructure Setup andverify whether the user isable to cross launch andview the informationabout Cisco TelePresenceManagement Suite(TMS)using InfrastructureConfiguration throughCisco PrimeCollaborationProvisioning
Cross launchTelePresenceManagementSuite(TMS) usingInfrastructureConfiguration throughCPC Provisioning
UCJ10.6Ph2S.CPC-PR.G.059
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 113
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Design ->Infrastructure Setup andverify whether the user isable to add Generic IOSRouter usingInfrastructure Setupsuccessfully throughCisco PrimeCollaborationProvisioning
Add Generic IOSRouter usingInfrastructure Setupthrough CPCProvisioning
UCJ10.6Ph2S.CPC-PR.G.060
NilPassedGo to Design ->Infrastructure Setup andverify whether the user isable to add DirectoryServer(LDAP) usingInfrastructure Setup andcheck users are importedfrom LDAP to CiscoPrime CollaborationProvisioning after addedsuccessfully
Add DirectoryServer(LDAP) usingInfrastructure Setupthrough CPCProvisioning
UCJ10.6Ph2S.CPC-PR.G.061
NilPassedOn the Home page verifythat user is able to clickview Advanced Featureslink and view the detailsthrough Getting StartedWizard
View AdvancedFeatures list fromGetting Started Wizard
UCJ10.6Ph2S.CPC-PR.G.062
NilPassedOn the Home verify thatuser is able to click viewAdvanced Features linkand view the detailsthrough Getting StartedWizard using JapaneseEnvironment
View AdvancedFeatures list fromGetting Started Wizardusing JapaneseEnvironment
UCJ10.6Ph2S.CPC-PR.G.063
NilPassedOn the Home page verifythat user is able to addLicense to Cisco PrimeCollaborationProvisioning throughGetting Started Wizardsuccessfully
Add License to CPCProvisioning throughGetting Started Wizard
UCJ10.6Ph2S.CPC-PR.G.064
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan114
Test Results SummaryCisco Prime Collaboration Provisioning
NilPassedGo to Deploy -> UserProvisioning and verifythat user is able to viewappropriate errormessageindication while selectinginvalid file format forimport users option underUser Provisioning page
Error Messageindication whileselecting invalid fileformat for import usersthrough UserProvisioning page
UCJ10.6Ph2S.CPC-PR.G.065
NilPassedGo to Deploy -> UserProvisioning and verifythat end user is able toview the appropriate errormessage indication whilecreating English User IDwith special charactersthrough UserProvisioning page
Error messageindication while createEnglish User ID withspecial characters
UCJ10.6Ph2S.CPC-PR.G.066
NilPassedGo to Deploy -> UserProvisioning and verifythat end user is able toview the appropriate errormessage indication whilecreating JapaneseUser IDwith special charactersthrough UserProvisioning page
Error messageindication while createJapanese User ID withspecial characters
UCJ10.6Ph2S.CPC-PR.G.067
Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID
NilPassedGo to Operate -> DeviceWork Center and verifywhether user is able to viewall the associated VMs ofESX Server using theMaximized 360 view of ESXServer
Checking all theavailable VMs underESX Server usingMaximized 360 view
UCJ10.6Ph2S.CPC-AS.G.001
NilPassedGo to Operate -> DeviceWork Center and verifywhether user is able to viewthe remaining VMs afterdeleting a VM andrediscovering the ESXServerusing the Maximized 360view of ESX Server
Remaining VMsunder ESX Serverafter deleting a VM
UCJ10.6Ph2S.CPC-AS.G.002
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 115
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able tolaunch the 360 view from theOpsView page under ServiceAvailability for differentdevice groups
Launching 360 viewfrom the OpsViewpage under ServiceAvailability fordifferent devicegroups
UCJ10.6Ph2S.CPC-AS.G.003
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able tocross launch AssociatedPhones of CME groupmembers from 360 view
Cross launchingAssociated Phones ofCME group membersfrom 360 view underOpsView
UCJ10.6Ph2S.CPC-AS.G.004
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able tocross launch ConnectivityDetails page of CUC groupmembers from 360 view
Cross launchingConnectivity Detailspage of CUC groupmembers from 360view under OpsView
UCJ10.6Ph2S.CPC-AS.G.005
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able toviewInsufficientFreeHardDiskAlarm on 360 view of ESXServer
InsufficientFreeHardDiskAlarm on 360 view ofESX Server underOpsView page
UCJ10.6Ph2S.CPC-AS.G.006
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able tolaunch the Maximized 360view from OpsView pageunder Service Availability fordifferent device groups
LaunchingMaximized360 view from theOpsView page underService Availabilityfor different devicegroups
UCJ10.6Ph2S.CPC-AS.G.007
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able tolaunch Alarms from theOpsView page under ServiceAvailability for differentdevice groups
Launching Alarmsfrom the OpsViewpage under ServiceAvailability fordifferent devicegroups
UCJ10.6Ph2S.CPC-AS.G.008
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able toping different devices usingMaximized 360 viewlaunched from ServiceAvailability
Pinging devices usingMaximized 360 viewlaunched fromAvailability Summary
UCJ10.6Ph2S.CPC-AS.G.009
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan116
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Home -> OpsView ->Availability Summary andverify whether user is able toget the Trace Route fordifferent devices from theirMaximized 360 view pagelaunched from ServiceAvailability
Trace Route fordifferent devices fromMaximized 360 viewfrom ServiceAvailability
UCJ10.6Ph2S.CPC-AS.G.010
NilPassedGo to Home -> OpsView andverify whether user is able tocross launch the cluster viewof the cluster under theOpsView on Home Page
Cross launch to thecluster view of thecluster on Home Page
UCJ10.6Ph2S.CPC-AS.G.011
NilPassedGo to Home -> OpsView andverify whether user is able tosee the Topology of thatcluster after cross launchingthe cluster view by clickingthe Topology tab
Checking Topology ofa cluster after crosslaunching cluster view
UCJ10.6Ph2S.CPC-AS.G.012
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the view as Fit to Screenafter selecting the Fit toScreen option in CircularLayout
Fit to Screen optionon the Topology Viewpage in CircularLayout
UCJ10.6Ph2S.CPC-AS.G.013
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the actual size of theTopology View afterselecting the Actual Sizeoption in Circular Layout
Actual size of theTopology View pagein Circular Layout
UCJ10.6Ph2S.CPC-AS.G.014
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom in the Topology Viewafter selecting the Zoom Inoption in Circular Layout
Checking the Zoom Inoption on theTopology View pagein Circular Layout
UCJ10.6Ph2S.CPC-AS.G.015
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom out the Topology Viewafter selecting the Zoom Outoption in Circular Layout
Checking the ZoomOut option on theTopology View pagein Circular Layout
UCJ10.6Ph2S.CPC-AS.G.016
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 117
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the view as Fit to Screenafter selecting the Fit toScreen option in HierarchicLayout
Fit to Screen optionon the Topology Viewpage in HierarchicLayout
UCJ10.6Ph2S.CPC-AS.G.017
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the actual size of theTopology View afterselecting the Actual Sizeoption in Hierarchic Layout
Actual size of theTopology View pagein Hierarchic Layout
UCJ10.6Ph2S.CPC-AS.G.018
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom in the Topology Viewafter selecting the Zoom Inoption in Hierarchic Layout
Checking the Zoom Inoption on theTopology View pagein Hierarchic Layout
UCJ10.6Ph2S.CPC-AS.G.019
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom out the Topology Viewafter selecting the Zoom Outoption in Hierarchic Layout
Checking the ZoomOut option on theTopology View pagein Hierarchic Layout
UCJ10.6Ph2S.CPC-AS.G.020
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the view as Fit to Screenafter selecting the Fit toScreen option in DistributedLayout
Fit to Screen optionon the Topology Viewpage in DistributedLayout
UCJ10.6Ph2S.CPC-AS.G.021
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able toget the actual size of theTopology View afterselecting the Actual Sizeoption in Distributed Layout
Actual size of theTopology View pagein Distributed Layout
UCJ10.6Ph2S.CPC-AS.G.022
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom in the Topology Viewafter selecting the Zoom Inoption in Distributed Layout
Checking the Zoom Inoption on theTopology View pagein Distributed Layout
UCJ10.6Ph2S.CPC-AS.G.023
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan118
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Home -> OpsView ->Cluster -> Topology andverify whether user is able tozoom out the Topology Viewafter selecting the Zoom Outoption in Distributed Layout
Checking the ZoomOut option on theTopology View pagein Distributed Layout
UCJ10.6Ph2S.CPC-AS.G.024
NilPassedGo to Home -> OpsView andverify whether user is able tosee the Cisco UnifiedCommunications Manager'scluster available on the HomePage under the OpsView
Unified CM cluster'savailability on theHome Page
UCJ10.6Ph2S.CPC-AS.G.025
NilPassedGo to Home -> OpsView andverify whether user is able tosee the Cisco TelePresenceVideo CommunicationServer's cluster available onthe Home Page under theOpsView
Cisco TelePresenceVideoCommunicationServer cluster'savailability on theHome Page
UCJ10.6Ph2S.CPC-AS.G.026
NilPassedGo to Home -> OpsView ->Cluster and verify whetheruser is able to see thetopology of Cisco UnifiedCommunications Managerfrom the Topology tab
View the topology ofUnified CM's cluster
UCJ10.6Ph2S.CPC-AS.G.027
NilPassedGo to Home -> OpsView ->Cluster and verify whetheruser is able to see thetopology of CiscoTelePresence VideoCommunication Server fromthe Topology tab
View the topology ofCisco TelePresenceVideoCommunicationServer's cluster
UCJ10.6Ph2S.CPC-AS.G.028
NilPassedGo to Home -> OpsView ->Cluster -> Endpoint byDevice Pool and verifywhether user is able to viewthe summary of phones in thecluster at the device poollevel
View the summary ofphones in the clusterat the device poollevel from theEndpoint by DevicePool tab
UCJ10.6Ph2S.CPC-AS.G.029
NilPassedGo to Home -> OpsView ->Cluster -> Device Search andverify whether user is able tosearch registered phonesusing Search Criteria
Searching registeredphones under DeviceSearch tab
UCJ10.6Ph2S.CPC-AS.G.030
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 119
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Home -> OpsView ->Cluster -> Device Search andverify whether user is able tosearch unregistered phonesusing Search Criteria
Searchingunregistered phonesunder Device Searchtab
UCJ10.6Ph2S.CPC-AS.G.031
NilPassedGo to Home -> OpsView ->Cluster -> Device Search andverify whether user is able tosearch Rejected phones usingSearch Criteria
Searching Rejectedphones under DeviceSearch tab
UCJ10.6Ph2S.CPC-AS.G.032
NilPassedGo to Home -> OpsView ->Cluster -> Device Search andverify whether user is able tosearch Any Status(ExceptUnknown) phones usingSearch Criteria
Searching AnyStatus(ExceptUnknown) phonesunder Device Searchtab
UCJ10.6Ph2S.CPC-AS.G.033
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see the TrunkGroup dashlet is available
Trunk Group dashlet'savailability underUtilization Monitor
UCJ10.6Ph2S.CPC-AS.G.034
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see the RouteGroup Utilization dashlet isavailable
Route GroupUtilization dashlet'savailability underUtilization Monitor
UCJ10.6Ph2S.CPC-AS.G.035
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see the TrunkGroup Utilization dashlet isavailable
Trunk GroupUtilization dashlet'savailability underUtilization Monitor
UCJ10.6Ph2S.CPC-AS.G.036
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see theLocation CAC BandwidthUtilization dashlet isavailable
Location CACBandwidthUtilizationdashlet's availabilityunder UtilizationMonitor
UCJ10.6Ph2S.CPC-AS.G.037
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see theTelePresence Endpointdashlet is available
TelePresenceEndpoint dashlet'savailability underUtilization Monitor
UCJ10.6Ph2S.CPC-AS.G.038
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see theConferencingDevices dashletis available
ConferencingDevicesdashlet's availabilityunder UtilizationMonitor
UCJ10.6Ph2S.CPC-AS.G.039
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan120
Test Results SummaryCisco Prime Collaboration Assurance
NilPassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see the LicenseUsage dashlet is available
License Usagesdashlet's availabilityunder UtilizationMonitor
UCJ10.6Ph2S.CPC-AS.G.040
Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID
NilPassedGo to Analyze -> CapacityAnalysis -> Location CACBandwidth Utilization and verifywhether user can see the 100%Utilization under Location CACBandwidth Utilization dashlet
Checking LocationCAC BandwidthUtilization dashletfor 100% Utilization
UCJ10.6Ph2S.CPC-AN.G.001
NilPassedGo to Analyze -> CapacityAnalysis -> Location CACBandwidth Utilization and verifywhether user can see Last 28Days data under Location CACBandwidth Utilization dashlet
Filtering LocationCAC BandwidthUtilization dashletfor Last 28 Days
UCJ10.6Ph2S.CPC-AN.G.002
NilPassedGo to Analyze -> ServiceExperience -> Top NCallers andverify whether user can see Last24 Weeks data under Top NCallers dashlet
Checking Top NCallers dashlet forLast 24 Weeks
UCJ10.6Ph2S.CPC-AN.G.003
NilPassedGo to Analyze -> ServiceExperience -> Top NCallers andverify whether user is able tocheck the incoming calls detailsin Top N Callers
Incoming callsdetails in Top NCallers
UCJ10.6Ph2S.CPC-AN.G.004
NilPassedGo to Analyze -> ServiceExperience -> Top NCallers andverify whether user is able tocheck the outgoing calls detailsin Top N Callers
Outgoing call detailsin Top N Callers
UCJ10.6Ph2S.CPC-AN.G.005
NilPassedGo to Analyze -> ServiceExperience -> Top NCallers andverify whether user is able to getthe Audio only calls details inTop N Callers
Audio only callsdetails in Top NCallers
UCJ10.6Ph2S.CPC-AN.G.006
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 121
Test Results SummaryCisco Prime Collaboration Analytics
NilPassedGo to Analyze -> ServiceExperience -> Top NCallers andverify whether user is able to getthe Video calls details in Top NCallers
Video calls details inTop N Callers
UCJ10.6Ph2S.CPC-AN.G.007
NilPassedGo to Analyze -> CapacityAnalysis -> Location CACBandwidth Utilization and verifywhether user can see green colorindicator in Location CACBandwidth Utilization dashlet ifthe Utilization is between 1-50%
Checking for greencolor indicator inLocation CACBandwidthUtilization dashletfor the utilizationbetween 1-50%
UCJ10.6Ph2S.CPC-AN.G.008
NilPassedGo to Analyze -> CapacityAnalysis -> Location CACBandwidth Utilization and verifywhether user can see orangecolor indicator in Location CACBandwidth Utilization dashlet ifthe Utilization is between51-80%
Checking for orangecolor indicator inLocation CACBandwidthUtilization dashletfor the utilizationbetween 51-80%
UCJ10.6Ph2S.CPC-AN.G.009
NilPassedGo to Analyze -> CapacityAnalysis -> Location CACBandwidth Utilization and verifywhether user can see red colorindicator in Location CACBandwidth Utilization dashlet ifthe Utilization is between81-100%
Checking for redcolor indicator inLocation CACBandwidthUtilization dashletfor the utilizationbetween 81-100%
UCJ10.6Ph2S.CPC-AN.G.010
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations and verify whetheruser is able to check theincoming call details in Top NCall Failure Locations
Incoming callsdetails in Top N CallFailure Locations
UCJ10.6Ph2S.CPC-AN.G.011
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations and verify whetheruser is able to check the outgoingcall details in Top N Call FailureLocations
Outgoing call detailsin Top N CallFailure Locations
UCJ10.6Ph2S.CPC-AN.G.012
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations and verify whetheruser is able to get the Audio onlycalls details in Top N CallFailure Locations
Audio only callsdetails in Top N CallFailure Locations
UCJ10.6Ph2S.CPC-AN.G.013
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan122
Test Results SummaryCisco Prime Collaboration Analytics
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations and verify whetheruser is able to get the video callsdetails in Top N Call FailureLocations
Video calls details inTop N Call FailureLocations
UCJ10.6Ph2S.CPC-AN.G.014
NilPassedGo to Analyze -> CapacityAnalysis and verify whether useris able to verify Global filter byCluster and Duration
Verification ofGlobal filter byCluster and Duration
UCJ10.6Ph2S.CPC-AN.G.015
NilPassedGo to Analyze -> CapacityAnalysis -> ConferencingDevices Video Utilization andverify whether user can see greencolor indicator in Location CACBandwidth Utilization dashlet ifthe Utilization is between 1-50%
Checking for greencolor indicator inConferencingDevices VideoUtilization dashletfor the utilizationbetween 1-50%
UCJ10.6Ph2S.CPC-AN.G.016
NilPassedGo to Analyze -> CapacityAnalysis -> ConferencingDevices Video Utilization andverify whether user can seeorange color indicator inConferencing Devices VideoUtilization dashlet if theUtilization is between 51-80%
Checking for orangecolor indicator inConferencingDevices VideoUtilization dashletfor the utilizationbetween 51-80%
UCJ10.6Ph2S.CPC-AN.G.017
NilPassedGo to Analyze -> CapacityAnalysis -> ConferencingDevices Video Utilization andverify whether user can see redcolor indicator in Location CACBandwidth Utilization dashlet ifthe Utilization is between81-100%
Checking for redcolor indicator inConferencingDevices VideoUtilization dashletfor the utilizationbetween 81-100%
UCJ10.6Ph2S.CPC-AN.G.018
NilPassedGo to Analyze -> TrafficAnalysis -> Top N Callers andverify whether user is able tocheck the endpoint details in TopN Callers dashlet
Endpoint details inTop N callers dashlet
UCJ10.6Ph2S.CPC-AN.G.019
NilPassedGo to Analyze -> TechnologyAdoption ->DeploymentDistribution and verify whetheruser is able to check theDeployment Distribution dashletGraph mode data and Chartmode data is equal
Comparison ofDeploymentDistribution UI Pieand Grid value
UCJ10.6Ph2S.CPC-AN.G.020
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 123
Test Results SummaryCisco Prime Collaboration Analytics
NilPassedGo to Analyze -> TrafficAnalysis -> Top N Callers andverify whether user is able tocheck the user details in Top NCallers dashlet
User details in TopN callers dashlet
UCJ10.6Ph2S.CPC-AN.G.021
NilPassedGo to Analyze -> TechnologyAdoption -> Call distribution byEndpoint Model and verifywhether user is able to check theCompleted Call details in Calldistribution by Endpoint model
Completed calldetails in Calldistribution byEndpoint Model
UCJ10.6Ph2S.CPC-AN.G.022
NilPassedGo to Analyze -> TechnologyAdoption -> Deploymentdistribution by Endpoint modeland verify whether user is ableto check the data labels to bedisplayed in the chart
Display of DataLabels in the chart inDeploymentdistribution byEndpoint model
UCJ10.6Ph2S.CPC-AN.G.023
NilPassedGo to Analyze -> TechnologyAdoption -> Deploymentdistribution by Endpoint model-> Detail view and verifywhether user is able to check theDeployment distribution byEndpoint model
Detail view ofDeploymentdistribution byEndpoint Modeldashlet
UCJ10.6Ph2S.CPC-AN.G.024
NilPassedGo to Analyze -> TechnologyAdoption -> Call distributionendpoint type and verify whetheruser is able to click all pie chartslices and finally click see detailslink to validate buttons
Pie chart slices inCall DistributionEndpoint Type
UCJ10.6Ph2S.CPC-AN.G.025
NilPassedGo to Analyze -> Asset Usage-> Least Used Endpoint Typesand verify whether user is ableto filter the data based on NoCalls
Least UsedEndpoints based onNo Calls
UCJ10.6Ph2S.CPC-AN.G.026
NilPassedGo to Analyze -> Asset Usage-> Least Used Endpoint Types-> Select Last 56 Weeks, NoMore than 3 Calls per week andverify whether user is able tofilter the data based on No Morethan 3 Calls per week
Least UsedEndpoints based onNo More than 3Calls per week
UCJ10.6Ph2S.CPC-AN.G.027
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan124
Test Results SummaryCisco Prime Collaboration Analytics
NilPassedGo to Analyze -> Asset Usage-> Least Used Endpoint Types-> Select Last 1 week and NoCalls and verify whether user isable to filter the data based onLast 1 week
Least UsedEndpoints based onLast 1 Week
UCJ10.6Ph2S.CPC-AN.G.028
NilPassedGo to Analyze -> ServiceExperience -> ServiceExperienceDistribution -> SelectLast 13 Months, Video, Gradedcalls and verify whether user isable to filter the graded videocalls
Graded video calls inLast 13 Months
UCJ10.6Ph2S.CPC-AN.G.029
NilPassedGo to Analyze -> ServiceExperience -> ServiceExperienceDistribution -> SelectLast 12 Weeks, audio only,Graded calls and verify whetheruser is able to filter the gradedaudio only calls
Graded Audio onlycalls in Last 12Weeks
UCJ10.6Ph2S.CPC-AN.G.030
NilPassedGo to Analyze -> ServiceExperience -> Users with servicequality issue -> Select Last 4Weeks, video, percentage andverify whether user is able tofilter the percentage of Userswith service quality issues invideo
Percentage of Userswith service qualityissues in video
UCJ10.6Ph2S.CPC-AN.G.031
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations -> Select Last 14Weeks, All Call Types,Outgoing, Absolute and verifywhether user is able to filter theOutgoing call failures in Top NCall failure locations
Filtering Outgoingcall failures in Top NCall failure locations
UCJ10.6Ph2S.CPC-AN.G.032
NilPassedGo to Analyze -> ServiceExperience -> TopNCall FailureLocations -> Select Last 14Weeks, All Call Types,Incoming, Absolute and verifywhether user is able to filter theIncoming call failures in Top NCall failure locations
Filtering Incomingcall failures in Top NCall failure locations
UCJ10.6Ph2S.CPC-AN.G.033
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 125
Test Results SummaryCisco Prime Collaboration Analytics
NilPassedGo to Analyze -> ServiceExperience -> Users with servicequality issues -> Select Last 2Weeks, Video, Absolutes andverify whether user is able tofilter the Users with servicequality issues on Video calls
Users with servicequality issues onVideo calls
UCJ10.6Ph2S.CPC-AN.G.034
NilPassedGo to Analyze -> CustomReportGenerator -> Open an existingreport & edit and verify whetheruser is able to check thefunctionality of editing CustomReports
Functionality of EditCustom Report inCustom ReportGenerator
UCJ10.6Ph2S.CPC-AN.G.035
NilPassedGo to Analyze -> TechnologyAdoption and verifywhether useris able to get the pie chart afterselecting Chart Mode
Chart iconverification inDeploymentDistribution byEndpoint Model
UCJ10.6Ph2S.CPC-AN.G.036
NilPassedGo to Analyze -> CapacityAnalysis -> Trunk Utilization ->Edit option and verify whetheruser is able to edit the title ofTrunk Utilization Dashlet
Validation of Editoption in TrunkUtilization
UCJ10.6Ph2S.CPC-AN.G.037
NilPassedGo to Analyze -> ServiceExperience -> Users with servicequality issues -> Select Last 2Weeks, Audio only, Absolutesand verify whether user is ableto filter the Users with servicequality issues on Audio onlycalls
Users with servicequality issues onAudio only calls
UCJ10.6Ph2S.CPC-AN.G.038
NilPassedGo to Analyze -> TrafficAnalysis -> Call Traffic Analysis-> Select Last 24 Weeks, Video,Call duration, Absolute andwhether user is able to filter theCall Traffic Analysis
Filtering the Callduration of videocalls for Last 24Weeks in CallTraffic Analysis
UCJ10.6Ph2S.CPC-AN.G.039
CSCus70556FailedGo to Analyze -> Asset Usage-> Least Used Endpoint Types-> SeeDetails and verify whetheruser is able to filter the data indetail view in Least UsedEndpoint Type
Generating data indetail view of LeastUsed Endpoint Type
UCJ10.6Ph2S.CPC-AN.G.040
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan126
Test Results SummaryCisco Prime Collaboration Analytics
Cisco Unified Communication System Upgrade / Migration Test
Upgrade PathsCUP(Upgrade)CUC(Upgrade)CUCM(Upgrade)8.5(1)
8.5.1.10000-35(MCS)8.5.1.12900-7 (MCS)8.5.1.10000-26(MCS)Base Release
JP-8.5.1.1000-1JP-8.5.1.1-65JP-8.5.1.1000-1Locale
8.5.4.10000-16(MCS)--Interim Release
JP-8.5.2.1000-1--Locale
8.5.4.10000-16(UCS)8.5.1.12900-7(UCS)8.5.1.10000-26(UCS)Interim Release
JP-8.5.2.1000-1JP-8.5.1.1-65JP-8.5.1.1000-1Locale
10.5.2.10000-9 (UCS)10.5.2.10000-5 (UCS)10.5.2.10000-5 (UCS)Target Release
CUP(Upgrade)CUC(Upgrade)CUCM(Upgrade)8.6(1)
8.6.1.10000-34(MCS)8.6.1.10000-43(MCS)8.6.1.10000-43(MCS)Base Release
JP-8.6.1.1000-1JP-8.5.1.1-92JP-8.6.1.1000-1Locale
8.6.3.10000-20(MCS)--Interim Release
JP-8.6.3.1000-1--Locale
8.6.3.10000-20(UCS)8.6.1.10000-43(UCS)8.6.1.10000-43(UCS)Interim Release
JP-8.6.3.1000-1JP-8.5.1.1-92JP-8.6.1.1000-1Locale
10.5.2.10000-9 (UCS)10.5.2.10000-5 (UCS)10.5.2.10000-5 (UCS)Target Release
CUP(Upgrade)CUC(Upgrade)CUCM(Upgrade)8.6(2)
8.6.2.10000-44(MCS)8.6.2.10000-30(MCS)8.6.2.10000-30(MCS)Base Release
JP-8.6.1.1000-1JP-8.6.2.4-113JP-8.6.2.1000-1Locale
8.6.3.10000-20(MCS)--Interim Release
JP-8.6.3.1000-1--Locale
8.6.3.10000-20(MCS)8.6.2.10000-30(MCS)8.6.2.10000-30(MCS)Interim Release
JP-8.6.3.1000-1JP-8.6.2.4-113JP-8.6.2.1000-1Locale
10.5.2.10000-9 (UCS)10.5.2.10000-5 (UCS)10.5.2.10000-5 (UCS)Target Release
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 127
Test Results SummaryCisco Unified Communication System Upgrade / Migration Test
Download Links for COP File:
CUCM/CUC COP File :
https://software.cisco.com/download/release.html?mdfid=282822890&flowid=45937&softwareid=282204704&release=COP-Files&relind=AVAILABLE&rellifecycle=&reltype=latest
CUP COP File :
https://software.cisco.com/download/release.html?mdfid=286269517&flowid=50462&softwareid=282074312&release=RECOVERY&relind=AVAILABLE&rellifecycle=&reltype=latest
COP-File installation Procedure:
The COP-File installation steps as follows.
• Put the COP file on an FTP or SFTP server that the server that you are upgrading can access.
• Log in to Cisco Unified Communications Operating System Administration.
• Navigate to Software Upgrades > Install/Upgrade. The Software Installation/Upgrade window displays.
• From the Source list, choose Remote File system.
• In the Directory field, enter the path to the directory that contains the patch file on the remote system.If the upgrade file is located on a Linux or Unix server, you must enter a forward slash (/) at the beginningof the directory path. For example, if the upgrade file is in the patches directory, you must enter /patches. If the upgrade file is located on a Windows server, remember that you are connecting to an FTP orSFTP server, so use the appropriate syntax. Begin the path with a forward slash and use forward slashesthroughout the path. The path must start from the FTP or SFTP root directory on the server, so youcannot enter a Windows absolute path, which starts with a drive letter (for example, C:).
• In the Server field, enter the server name or IP address.
• In the User Name field, enter the user name on the remote server.
• In the User Password field, enter the password on the remote server.
• Select the transfer protocol from the Transfer Protocol field.
• To use the Email Notification feature, enter your Email Destination and SMTP Server in the fieldsprovided.
• To continue the upgrade process, click Next.
• Choose the upgrade version that you want to install and click Next.
• In the next window, monitor the progress of the download.
• If you want to install the upgrade and automatically reboot to the upgraded software, choose Switch tonew version after upgrade. The system restarts and runs the upgraded software.
• If you want to install the upgrade and then manually switch to the upgraded software at a later time,choose Do not switch to new version after upgrade. Click Next.
• When the installation completes, click Finish (not applicable for Refresh Upgrades).
• To restart the system and activate the upgrade, choose Settings > Version then click Switch Version.The system restarts running the upgraded software (not applicable for Refresh Upgrades).
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan128
Test Results SummaryUpgrade Paths
Upgrade 8.5.1 to 10.5.2L2 Upgrade 8.5.1 to 10.5.2
Target Release setMigration ReleaseSet
IntermediateRelease Set 1
Base ReleaseProduct/Component
10.5.2.10000-58.5.1.10000-26(UCS)NIL8.5.1.10000-26(MCS)CUCM
JP-10.5.2.1000-1JP-8.5.1.1000-1NILJP-8.5.1.1000-1CUCM Locale
10.5.2.10000-58.5.1.12900-7(UCS)
NIL8.5.1.12900-7(MCS)
CUC
JP-10.5.2.1-1JP-8.5.1.1-65NILJP-8.5.1.1-65CUC Locale
10.5.2.10000-98.5.4.10000-16(UCS)8.5.4.10000-16(MCS)8.5.1.10000-35(MCS)CUP
JP-10.5.2.1000-1JP-8.5.2.1000-1JP-8.5.2.1000-1JP-8.5.1.1000-1CUP locale
10.5.18.58.54.0(2)SRST
15.4(3)M115.1.3T15.1.3T12.4(15)T4Voice Gateway IOS
NIL7.0(6)7.0(6)2.1(4)IP Communicator
NIL8.5(6)8.5(6)1.2(4)Unified PersonalCommunicator
10.6NILNILNILJabber for Mac
10.6NILNILNILJabber for iPhone
10.6NILNILNILJabber for iPad
10.6NILNILNILJabber for Android
10.6NILNILNILJabber forWindows
Note: Before Upgrading CUCM/CUC from 8.5.1 to 10.5.2, we need to install the COP files(ciscocm.refresh_upgrade_v1.5.cop.sgn, ciscocm.version3-keys.cop.sgn ).
Before upgrading CUP from 8.5.4 to 10.5.2, We need to install the COP files(cisco.com.cup.refresh_upgrade_v1.01.cop, ciscocm.version3-keys.cop.sgn)
*Cop File Download links and Procedure for Installation is given below the Upgrade Paths Table
DefectsStatusDescripitonTitleLogical ID
PassedVerify whether Installation ofUnified CM 8.5(1) Publisher onMCS successfully
Installation of UnifiedCM 8.5(1) Publisher onMCS
UC1052S.UPGRADE.L2.001
PassedVerify whether Installation ofUnified CM 8.5(1) Subscriber onMCS successfully
Installation of UnifiedCM 8.5(1) Subscriberon MCS.
UC1052S.UPGRADE.L2.002
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 129
Test Results SummaryUpgrade 8.5.1 to 10.5.2
PassedVerify whether Installation ofCisco Unity connection 8.5(1)Publisher on MCS successfully
Installation of CiscoUnity connection 8.5(1)Publisher on MCS
UC1052S.UPGRADE.L2.003
PassedVerify whether Installation ofCisco Unity connection 8.5(1)Subscriber on MCS successfully
Installation of CiscoUnity connection 8.5(1)Subscriber on MCS
UC1052S.UPGRADE.L2.004
PassedVerify whether Installation ofCisco Unified presence 8.5(1)Publisher on MCS successfully
Installation of CiscoUnified presence 8.5(1)Publisher on MCS
UC1052S.UPGRADE.L2.005
PassedVerify whether Installation ofCisco Unified presence 8.5(1)Subscriber on MCS successfully
Installation of CiscoUnified presence 8.5(1)Subscriber on MCS
UC1052S.UPGRADE.L2.006
PassedVerify the Japanese localeinstalled into Unified CMPublisher successfully.
Install Japanese localeinto Unified CM 8.5(1)Publisher
UC1052S.UPGRADE.L2.007
PassedVerify the Japanese localeinstalled into Unified CMsubscriber successfully.
Install Japanese localeinto Unified CM 8.5(1)subscriber
UC1052S.UPGRADE.L2.008
PassedVerify the Japanese localeinstalled successfully into CiscoUnity connection 8.5(1) Publisher
Install Japanese localeinto Cisco Unityconnection 8.5(1)Publisher
UC1052S.UPGRADE.L2.009
PassedVerify the Japanese localeinstalled successfully into CiscoUnified Presence 8.5(1) Publisher
Install Japanese localeinto Cisco UnifiedPresence 8.5(1)Publisher
UC1052S.UPGRADE.L2.011
PassedVerify whether license is appliedon the Unified CM8.5(1)successfully
Apply license on theUnified CM 8.5(1)
UC1052S.UPGRADE.L2.013
PassedVerify whether Cisco UnityConnection 8.5(1) Integrationwith Unified CM 8.5(1)successfully.
Integrate the CiscoUnity Connection 8.5(1)with Unified CM 8.5(1)
UC1052S.UPGRADE.L2.016
PassedVerify whether Cisco UnifiedPresence 8.5(1) Integration withUnified CM 8.5(1) successfully.
Integrate the CiscoUnified Presence 8.5(1)with Unified CM 8.5(1)
UC1052S.UPGRADE.L2.017
PassedVerify whether the Unified CMintegrating with Active Directorysuccessfully.
Integrate the UnifiedCM with ActiveDirectory
UC1052S.UPGRADE.L2.018
PassedVerify whether end users can becreated in the unified CM 8.5(1)successfully
Create end user in theUnified CM 8.5(1)
UC1052S.UPGRADE.L2.019
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan130
Test Results SummaryUpgrade 8.5.1 to 10.5.2
PassedVerify whether SIP Trunk can becreated in the Unified CM 8.5(1)successfully.
Create SIP Trunk toInterop site in theUnified CM 8.5(1)Publisher
UC1052S.UPGRADE.L2.021
PassedVerify whether MGCP Gatewaycan be register in the Unified CMfrom 8.5(1) Publisher successfully
Register the MGCPGateway in the UnifiedCM 8.5(1) Publisher
UC1052S.UPGRADE.L2.024
PassedVerify whether the SRST fallbackis working properly in UnifiedCM 8.5(1) once the WAN outagehappens successfully.
SRST fallback shouldwork properly once theWAN outage happens.
UC1052S.UPGRADE.L2.025
PassedVerify whether PersonalDirectory Service in the UnifiedCM 8.5(1) successfully.
Personal DirectoryService in the UnifiedCM 8.5(1)
UC1052S.UPGRADE.L2.029
PassedVerify whether voicemail shouldwork properly in the Cisco Unityconnection 8.5(1) successfully.
Voicemail should workproperly in the CiscoUnity connection 8.5(1)
UC1052S.UPGRADE.L2.032
PassedVerify whether backup could berestore in Unified CM 8.5(1)Publisher on UCS successfully
Restore the backup ofUnified CM 8.5(1)Publisher on UCS
UC1052S.UPGRADE.L2.056
PassedVerify whether could be restorein cisco unity connection 8.5(1)Publisher as well as subscribersuccessfully
Restore backup in thecisco unity connection8.5(1) Publisher as wellas subscriber
UC1052S.UPGRADE.L2.057
PassedVerify whether the CUCMPublisher upgrade on UCSsuccessfully
Upgrade CUCMPublisher from 8.5(1)version to 10.5(2) onUCS
UC1052S.UPGRADE.L2.059
PassedVerify the Gateway Registrationafter the Upgrade the Unified CMfrom 8.5(1)to 10.5(2) successfully
MGCP GatewayRegistration status afterUpgrade has been done.
UC1052S.UPGRADE.L2.079
PassedVerify whether SIP TrunkCreation should be replicated intheUnified CMUpgrade has beendone successfully.
SIP Trunk Creationshould be replicated inthe Unified CMUpgrade has been done
UC1052S.UPGRADE.L2.080
Upgrade 8.6.1 to 10.5.2Upgrade 8.6.2 to 10.5.2
Target Release setMigration ReleaseSet
IntermediateRelease Set 1
Base ReleaseProduct/Component
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 131
Test Results SummaryUpgrade 8.6.1 to 10.5.2
10.5.2.10000-58.6.1.10000-43(UCS)Nil8.6.1.10000-43(MCS)CUCM
JP-10.5.2.1000-1JP-8.6.1.1000-1NilJP-8.6.1.1000-1CUCM Locale
10.5.2.10000-58.6.1.10000-43(UCS)Nil8.6.1.10000-43(MCS)CUC
JP-10.5.2.1-1JP-8.5.1.1-92NilJP-8.5.1.1-92CUC Locale
10.5.2.10000-98.6.3.10000-20(UCS)8.6.3.10000-20(MCS)8.6.1.10000-34(MCS)CUP
JP-10.5.2.1000-1JP-8.6.3.1000-1JP-8.6.3.1000-1JP-8.6.1.1000-1CUP Locale
10.5.18.68.6SRST
15.4(3)M115.1(4)M115.1(4)M115.1(4)M1Voice Gateway IOS
8.6(1)8.6(1)8.6(1)IP Communicator
8.5(1)/Windows,7.1(2)/Mac
PersonalCommunicator
10.68.1.58.1.58.1.5Jabber for Mac
10.6NILNILNILJabber for iPhone
10.6NILNILNILJabber for iPad
10.6NILNILNILJabber for Android
10.6NILNILNILJabber forWindows
Note: Before upgrading CUCM/CUC from 8.6.1 to 10.5.2, We need to install the COP file(ciscocm.version3-keys.cop.sgn)
Before upgradingCUP from 8.6.3 to 10.5.2, We need to install the COP file (ciscocm.version3-keys.cop.sgn)
*Cop File Download links and Installation Procedure is given below the Upgrade Paths Table
Defect IDStatusDescriptionTitleLogical ID
PassedVerify whetherInstallation of UnifiedCM 8.6(1) Publisher onMCS successfully
Installation of Unified CM8.6(1) Publisher on MCS
UC1052S.UPGRADE.L2.091
PassedVerify whetherInstallation of UnifiedCM 8.6(1) Subscriberon MCS successfully
Installation of Unified CM8.6(1) Subscriber on MCS
UC1052S.UPGRADE.L2.092
PassedVerify whetherInstallation of CiscoUnity connection 8.6(1)Publisher on MCSsuccessfully
Installation of Cisco Unityconnection 8.6(1) Publisheron MCS
UC1052S.UPGRADE.L2.093
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan132
Test Results SummaryUpgrade 8.6.1 to 10.5.2
PassedVerify whetherInstallation of CiscoUnity connection 8.6(1)Subscriber on MCSsuccessfully
Installation of Cisco Unityconnection 8.6(1)Subscriber on MCS
UC1052S.UPGRADE.L2.094
PassedVerify whetherInstallation of CiscoUnified presence 8.6(1)Publisher on MCSsuccessfully
Installation of CiscoUnified presence 8.6(1)Publisher on MCS
UC1052S.UPGRADE.L2.095
PassedVerify whetherInstallation of CiscoUnified presence 8.6(1)Subscriber on MCSsuccessfully
Installation of CiscoUnified presence 8.6(1)Subscriber on MCS
UC1052S.UPGRADE.L2.096
PassedVerify the Japaneselocale installed intoUnified CM Publishersuccessfully.
Install Japanese locale intoUnified CM 8.6(1)Publisher
UC1052S.UPGRADE.L2.097
PassedVerify the Japaneselocale installedsuccessfully into CiscoUnity connection 8.6(1)Publisher
Install Japanese locale intoCisco Unity connection8.6(1) Publisher
UC1052S.UPGRADE.L2.099
PassedVerify whether licenseis applied on the UnifiedCM 8.6(1)successfully
Apply license on theUnified CM 8.6(1)
UC1052S.UPGRADE.L2.103
PassedVerify whether CiscoUnified Presence 8.6(1)Integration with UnifiedCM 8.6(1) successfully
Integrate the Cisco UnifiedPresence 8.6(1) withUnified CM 8.6(1)
UC1052S.UPGRADE.L2.107
PassedVerify whether theUnified CM integratingwith Active Directorysuccessfully
Integrate the Unified CMwith Active Directory
UC1052S.UPGRADE.L2.106
PassedVerify whether ICTTrunk can be created inthe Unified CM 8.6(1)successfully
Create ICT Trunk toInterop site in the UnifiedCM 8.6(1) Publisher
UC1052S.UPGRADE.L2.112
PassedVerify whether theSRST fallback isworking properly inUnified CM 8.6(1) oncethe WAN outagehappens successfully.
SRST fallback should workproperly once the WANoutage happens.
UC1052S.UPGRADE.L2.115
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 133
Test Results SummaryUpgrade 8.6.1 to 10.5.2
PassedVerify whether basiccall can be madebetween the IP Phonesin the unified CM 8.6(1)
Basic call can be made inthe unified CM 8.6(1)
UC1052S.UPGRADE.L2.116
PassedVerify whetherinteroperability call canbe made in the UnifiedCM successfully.
Make an interoperabilitycall in the Unified CM8.6(1)
UC1052S.UPGRADE.L2.118
PassedVerify whether PersonalDirectory Service in theUnified CM 8.6(1)successfully.
Personal Directory Servicein the Unified CM 8.6(1)
UC1052S.UPGRADE.L2.119
PassedVerify that Alertingname display in calledparty when call made toan Alerting nameconfigured IP Phone
Alerting name display incalled party when call madeto an Alerting nameconfigured IP Phone
UC1052S.UPGRADE.L2.121
PassedVerify whether backupcan be taken from theUnified CMviaDisasterrecovery Systemsuccessfully
Backup should be takenfrom theUnified CM8.6(1)Publisher
UC1052S.UPGRADE.L2.125
PassedVerify whetherInstallation of UnifiedCM 8.6(1) Publisher onUCS successfully
Installation of Unified CM8.6(1) Publisher on UCS
UC1052S.UPGRADE.L2.131
PassedVerify the Japaneselocale installed intoUnified CM Publishersuccessfully
Install Japanese locale intoUnified CM 8.6(1)Publisher
UC1052S.UPGRADE.L2.137
PassedVerify whether backupcould be restore inUnified CM 8.6(1)Publisher on UCSsuccessfully
Restore the backup ofUnified CM 8.6(1)Publisher on UCS
UC1052S.UPGRADE.L2.147
PassedVerify whether could berestore in cisco unityconnection 8.6(1)Publisher as well assubscriber successfully
Restore backup in the ciscounity connection 8.6(1)Publisher as well assubscriber
UC1052S.UPGRADE.L2.148
PassedVerify whether theCUCM Publisherupgrade on UCSsuccessfully
Upgrade CUCM Publisherfrom 8.6(1) version to10.5(2) on UCS
UC1052S.UPGRADE.L2.150
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan134
Test Results SummaryUpgrade 8.6.1 to 10.5.2
PassedVerify whether the CUCPublisher upgrade onUCS successfully
Upgrade CUC Publisherfrom 8.6(1) version to10.5(2) on UCS
UC1052S.UPGRADE.L2.152
PassedVerify the Japaneselocale installedsuccessfully into CiscoUnified Presence10.5(2) Publisher
Install Japanese locale intoCisco Unified Presence10.5(2) Publisher
UC1052S.UPGRADE.L2.160
PassedVerify whether CiscoUnified PresenceIntegration with UnifiedCM after the Upgradehas been donesuccessfully
Check the Cisco UnifiedPresence Integration withUnified CM after theUpgrade has been done.
UC1052S.UPGRADE.L2.166
PassedVerify whether LDAPsynchronized usershould be in the UnifiedCM after the Upgradehas been donesuccessfully
LDAP synchronized usershould be in the UnifiedCM after the Upgrade hasbeen done.
UC1052S.UPGRADE.L2.167
PassedVerify whether SIPTrunk Creation shouldbe replicated in theUnified CM Upgradehas been donesuccessfully
SIP Trunk Creation shouldbe replicated in the UnifiedCMUpgrade has been done
UC1052S.UPGRADE.L2.171
PassedVerify whether Voicemail should work afterupgrade the Cisco Unityconnection from 8.6(1)to 10.5(2) successfully
Voice mail should workafter upgrade the CiscoUnity connection from8.6(1) to 10.5(2)
UC1052S.UPGRADE.L2.176
Upgrade 8.6.2 to 10.5.2Upgrade 8.6.2 to 10.5.2
Target Release setMigration ReleaseSet
IntermediateRelease Set 1
Base ReleaseProduct/Component
10.5.2.10000-58.6.2.10000-30(UCS)Nil8.6.2.10000-30(MCS)CUCM
JP-10.5.2.1000-1JP-8.6.2.1000-1NilJP-8.6.2.1000-1CUCM Locale
10.5.2.10000-58.6.2.10000-30(UCS)Nil8.6.2.10000-30(MCS)CUC
JP-10.5.2.1-1JP-8.6.2.4-113NilJP-8.6.2.4-113CUC Locale
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 135
Test Results SummaryUpgrade 8.6.2 to 10.5.2
10.5.2.10000-98.6.3.10000-20(UCS)8.6.3.10000-20(MCS)8.6.2.10000-44(MCS)CUP
JP-10.5.2.1000-1JP-8.6.3.1000-1JP-8.6.3.1000-1JP-8.6.1.1000-1CUP Locale
10.5.18.68.6SRST
15.4(3)M115.1(4)M115.1(4)M115.1(4)M1Voice Gateway IOS
8.6(1)8.6(1)8.6(1)IP Communicator
8.5(1)/Windows,7.1(2)/Mac
PersonalCommunicator
10.68.1.58.1.58.1.5Jabber for Mac
10.6NILNILNILJabber for iPhone
10.6NILNILNILJabber for iPad
10.6NILNILNILJabber for Android
10.6NILNilNilJabber forWindows
Note: Before upgrading CUCM/CUC from 8.6.2 to 10.5.2, We need to install the COP file(ciscocm.version3-keys.cop.sgn)
Before upgradingCUP from 8.6.3 to 10.5.2, We need to install the COP file (ciscocm.version3-keys.cop.sgn)
*Cop File Download links and Installation Procedure is given below the Upgrade Paths Table
Defect IDStatusDescriptionTitleLogical ID
PassedVerify whether Installationof Unified CM 8.6(2)Publisher on MCSsuccessfully
Installation of UnifiedCM 8.6(2) Publisher onMCS
UC1052S.UPGRADE.L2.182
PassedVerify whether Installationof Unified CM 8.6(2)Subscriber on MCSsuccessfully
Installation of UnifiedCM8.6(2) Subscriber onMCS.
UC1052S.UPGRADE.L2.183
PassedVerify whether Installationof Cisco Unity connection8.6(2) Publisher on MCSsuccessfully
Installation of CiscoUnity connection 8.6(2)Publisher on MCS
UC1052S.UPGRADE.L2.184
PassedVerify whether Installationof Cisco Unity connection8.6(2) Subscriber on MCSsuccessfully
Installation of CiscoUnity connection 8.6(2)Subscriber on MCS
UC1052S.UPGRADE.L2.185
PassedVerify whether Installationof Cisco Unified presence8.6(2) Publisher on MCSsuccessfully
Installation of CiscoUnified presence 8.6(2)Publisher on MCS
UC1052S.UPGRADE.L2.186
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan136
Test Results SummaryUpgrade 8.6.2 to 10.5.2
PassedVerify whether Installationof Cisco Unified presence8.6(2) Subscriber on MCSsuccessfully
Installation of CiscoUnified presence 8.6(2)Subscriber on MCS
UC1052S.UPGRADE.L2.187
PassedVerify the Japanese localeinstalled successfully intoCisco Unified Presence8.6(2) Publisher
Install Japanese localeinto Cisco UnifiedPresence 8.6(2)Publisher
UC1052S.UPGRADE.L2.191
PassedVerify whether license isapplied on the Cisco Unifiedpresence 8.6(2) successfully
Apply license on theCisco Unified presence8.6(2)
UC1052S.UPGRADE.L2.195
PassedVerify whether Cisco UnityConnection 8.6(2) Integrationwith Unified CM 8.6(2)successfully
Integrate the CiscoUnityConnection 8.6(2) withUnified CM 8.6(2)
UC1052S.UPGRADE.L2.196
PassedVerify whether end users canbe created in the unified CM8.6(2) successfully
Create end user in theUnified CM 8.6(2)
UC1052S.UPGRADE.L2.199
PassedVerify whether SCCP/SIP IPPhones can be registeredwithUnified CM 8.6(2)
IP Phones should beregistered with UnifiedCM 8.6(2)
UC1052S.UPGRADE.L2.200
PassedVerify whether MGCPGateway can be register inthe Unified CM from 8.6(2)Publisher successfully
Register the MGCPGateway in the UnifiedCM 8.6(2) Publisher
UC1052S.UPGRADE.L2.204
PassedVerify whether the SRSTfallback is working properlyin Unified CM 8.6(2) oncethe WAN outage happenssuccessfully.
SRST fallback shouldwork properly once theWAN outage happens.
UC1052S.UPGRADE.L2.205
PassedVerify whetherinteroperability call can bemade in the Unified CMsuccessfully.
Make an interoperabilitycall in the Unified CM8.6(2)
UC1052S.UPGRADE.L2.208
PassedVerify whether PersonalDirectory Service in theUnified CM 8.6(2)successfully.
Personal DirectoryService in the UnifiedCM 8.6(2)
UC1052S.UPGRADE.L2.209
PassedVerify whether voicemailshould work properly in theCisco Unity connection8.6(1) successfully.
Voicemail should workproperly in the CiscoUnity connection 8.6(2)
UC1052S.UPGRADE.L2.212
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 137
Test Results SummaryUpgrade 8.6.2 to 10.5.2
PassedVerify whether backup canbe taken from the UnifiedCM via Disaster recoverySystem successfully
Backup should be takenfrom the Unified CM8.6(2) Publisher
UC1052S.UPGRADE.L2.215
PassedVerify whether backup couldbe restore in Unified CM8.6(2) Publisher on UCSsuccessfully
Restore the backup ofUnified CM 8.6(2)Publisher on UCS
UC1052S.UPGRADE.L2.236
PassedVerify whether could berestore in cisco unityconnection 8.6(2) Publisheras well as subscribersuccessfully
Restore backup in thecisco unity connection8.6(2) Publisher as wellas subscriber
UC1052S.UPGRADE.L2.237
PassedVerify whether the CUCMPublisher upgrade on UCSsuccessfully
Upgrade CUCMPublisher from 8.6(2)version to 10.5(2) onUCS
UC1052S.UPGRADE.L2.239
PassedVerify whether the CUPPublisher upgrade on UCSsuccessfully
Upgrade CUP Publisherfrom 8.6(3) version to10.5(2) on UCS
UC1052S.UPGRADE.L2.243
PassedVerify whether basic call canbe made between the IPPhones once the unified CMUpgrade has been donesuccessfully.
Basic call can be madeonce the unified CMUpgrade has been done
UC1052S.UPGRADE.L2.263
Related DocumentationCisco Unified Communications Manager IM and Presence Service
Managed File Transfer (MFT) - Feature Configuration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_2/CUP0_BK_CEB3E82E_00_config-admin-guide-imp-1052/CUP0_BK_CEB3E82E_00_config-admin-guide-imp-1052_chapter_010110.html
Cisco TelePresence Video Communication Server
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-5-1.pdf
Mobile and Remote Access Deployment Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan138
Test Results SummaryRelated Documentation
Configuration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-5.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco-VCS-Virtual-Machine-Install-Guide-X8-5.pdf
Cisco TelePresence Management Suite
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-14-6.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-14-6.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-14-6-1.pdf
Cisco TelePresence TX9000 Series
Release Notes:
http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.html
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/admin/guide/tx_6_0_admin_guide.html
Installation Guide:
http://www.cisco.com/c/en/us/td/docs/telepresence/tx9000/assembly_guide/tx9000_9200_assembly_guide.html
Cisco TelePresence SX80 Codec
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/administration-guide/sx80-administrator-guide-tc73.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/installation-guide/sx80-installation-sheet.pdf
Cisco TelePresence SX20 QuickSet
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc6/administration_guide/sx20-quickset-administrator-guide-tc62.pdf
Release Notes:
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 139
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence SX10 QuickSet
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/administration-guide/sx10-administrator-guide-tc71.pdf
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/user-guide/trc6-sx10-user-guide-tc73.pdf
Cisco TelePresence System EX series
EX60 and EX90 - Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc73.pdf
EX60 - Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/installation_guide/ex60_installation_sheet_for_web.pdf
EX90 - Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/installation_guide/ex90_installation_sheet_for_web.pdf
EX60 and EX90 - User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/user-guide/ex60-ex90-user-guide-tc73.pdf
Cisco TelePresence System C/SX/EX/MX/Profile Series
Software Release Notes TC7:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence System Integrator Package C90
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc73.pdf
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc73.pdf
Cisco TelePresence MCU
Install and Upgrade Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_Deployment_guide_1-31.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-55.pdf
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan140
Test Results SummaryRelated Documentation
Cisco TelePresence Conductor
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC3-0.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC3-0.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC3-0-2.pdf
Cisco Jabber Guest
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_5/ag/JABC_BK_J2895C25_00_jabber-guest-administration-guide.html
Installation Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_5/icg/JABC_BK_JA306F08_00_jabber-guest-install-and-configure.html
Cisco TelePresence Server
Configuration Guide:
http://www.cisco.com/en/US/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-1-1-79.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-1-1-79.pdf
Cisco TelePresence MX300 G2 and MX200 G2
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/mx-series/tc7/administration-guide/mx200g2-mx300g2-administrator-guide-tc73.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
Cisco TelePresence Touch
Touch 10 - User Guide:
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 141
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/user-guide/touch10-user-guide-tc73.pdf
Cisco DX70 and DX80
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1022/DX00_BK_C9FCBAE4_00_cisco-dx-series-ag1022.pdf
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx70/user/1022/en/dx70-dx80-user-guide-1022.pdf
DX80 - Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx80/install/dx80-installation-guide-web-version.pdf
Cisco Prime Collaboration Provisioning
User Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/provisioning/Cisco_Prime_Collaboration_Provisioning_Guide_10_6.pdf
Quick Start Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/quick/start/guide/Cisco_Prime_Collaboration_Quick_Start_Guide_10_6.pdf
Upgrade Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/upg_mig/guide/Cisco_Prime_Collaboration_Upgrade_Guide_10_6.pdf
Release Notes:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/release/notes/Cisco_Prime_Collaboration_Release_Notes_10_6.pdf
Cisco Prime Collaboration Assurance
User Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/assurance/advanced/guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_10_6.pdf
Quick Start Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/quick/start/guide/Cisco_Prime_Collaboration_Quick_Start_Guide_10_6.pdf
Upgrade Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/upg_mig/guide/Cisco_Prime_Collaboration_Upgrade_Guide_10_6.pdf
Release Notes:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/release/notes/Cisco_Prime_Collaboration_Release_Notes_10_6.pdf
Cisco Prime Collaboration Analytics
User Guide:
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan142
Test Results SummaryRelated Documentation
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/analytics/guide/Cisco_Prime_Collaboration_Analytics_Guide_10-6.pdf
Quick Start Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/quick/start/guide/Cisco_Prime_Collaboration_Quick_Start_Guide_10_6.pdf
Upgrade Guide:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/upg_mig/guide/Cisco_Prime_Collaboration_Upgrade_Guide_10_6.pdf
Release Notes:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/release/notes/Cisco_Prime_Collaboration_Release_Notes_10_6.pdf
Upgrade / Migration
Release Notes for Cisco Unified Communications Manager Release 10.5(2)
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_2/CUCM_BK_C6A7E384_00_cucm-release-notes-1052.html
Important Notes about Upgrades
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_2/CUCM_BK_C6A7E384_00_cucm-release-notes-1052/CUCM_BK_C6A7E384_00_cucm-release-notes-1052_chapter_01.html
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan 143
Test Results SummaryRelated Documentation
Test Results for Cisco Unified Communications System Release 10.6 Phase II for Japan144
Test Results SummaryRelated Documentation