Test & MeasurementRental Solutions Guide

techrentals

Volume 41 • Issue 21

TR as a business really focusses in on providing you with the right rental solutions for electronic equipment. Working with our customers, we’ve tackled a diverse

range of complex applications and scenarios; solving your technical issues utilising TR’s experienced sales and engineering expertise. Collectively the sales team has more than 120 years of expertise available to assist you with your testing or measurement issues. This available expertise is just part of the value that we provide in the overall service that we have built over more than 40 years. We have also embraced social media over the last 12 months. Building valuable tools and resources for you such as a new YouTube channel where you can easily access videos on how to use a range of rental assets.We’re continually looking at better ways to cater for your requirements and ensure that TR is offering you a range of complementary services to support your business. Our TR Calibration business has invested in a range of new capabilities to support your test and measurement activities. This involved increasing its NATA capability around a range of areas including torque transducers, high voltage/low frequency, and vibration. Our TR Hirecom business is also available to work with you to satisfy your two way radio and satellite phone requirements.We are continually adding value and new solutions into our business. So, whether you need something for your short or long term requirements, please don’t hesitate in contacting us to facilitate your needs.

169 South RoadRidleytonSouth Australia 5008Ph: 1800 632 652 | Fax: 08 8302 8899

18 Joseph StreetBlackburn NorthVictoria 3130Ph: 1800 632 652 | Fax: 03 9896 3099

41 Enterprise CircuitPrestonsNew South Wales 2170Ph: 1800 632 652 | Fax: 02 8777 0877

Adelaide

TechRentals Australia

From the CEO

TechRentals Malaysia TechRentals New Zealand*TR Calibration

1800 632 652www.techrentals.com.aurent@techrentals.com.au

1800 88 7368www.techrentals.com.my

0800 832 475www.techrentals.co.nz

1300 790 480www.trcalibration.com.au

Melbourne Sydney

72 Donaldson RoadRockleaQueensland 4106Ph: 1800 632 652 | Fax: 07 3077 8872

29 Jalan Serendah 26/39, iParc 2, Seksyen 26, 40400 Shah Alam SelangorMalaysiaPh: +60 3 5614 1135Fax: +60 3 5614 4139

101A Station Road Penrose AucklandNew ZealandPh: +64 9 589 2030Fax: +64 9 589 2031*Distributor of TechRentals Australia

72 Donaldson RoadRockleaQueensland 4106Ph: 1300 790 480 Fax: 07 3717 9148

41 Enterprise CircuitPrestonsNew South Wales 2170Ph: 1300 790 480Fax: 02 8783 5171

2-1-40, Tingkat Mahsuri 4 (1264),Terrace-Plus,11950 Bayan Lepas,Penang, MalaysiaPh: +60 4 619 2641Fax: +60 4 619 2643

Unit 2, 1 Hartley DriveThorntonNew South Wales 2322Ph: 1800 632 652 | Fax: 02 4966 3586

Unit 2, 14 Blackhawk BoulevardThuringowa CentralQueensland 4817Ph: 1800 632 652 | Fax: 07 4723 5397

Brisbane

Selangor D.E AucklandBrisbane

SydneyPenang

Newcastle Townsville

Unit 6, 143 Coonawarra RoadWinnellie (Driveway access via Mataram St)Northern Territory 0820Ph: 1800 632 652| Fax: 08 8947 2901

122 Kewdale RoadKewdaleWestern Australia 6105Ph: 1800 632 652 | Fax: 08 9441 3999

Darwin Perth

Dave Gallagher, CEO.

Office Locations

techrentals hirecom telecomYour trusted partner in technology. Offering innovative solutions through our leading brands:

10

1

Contents

10 REAsONs Why yOu shOulD RENT

Manufacturers Index 5

General Index 2

Electronics 8

Radio Frequency 12

Data & Telecommunications 18

Electrical Power 24

General Industrial 38

Physical Measurement 52

Construction 58

Environmental & Ohs 64

Managed solutions 43

Case studies 28-29, 51, 57 & 61

stretch your budgetTest equipment is often used just some of the time. Rental allows you to pay for it only when you use it, as well as stretching your budget by accessing more equipment than you could if you purchased it outright.

utilise operating expenseTest equipment is expensive often sitting on a shelf collecting dust – not an effective use of your valuable business capital. Rental allows you to free up cash for other parts of the business where it can be used to generate additional profits.

Conduct product research before purchasingIt is not always clear immediately which make and model will fulfil your requirements best. Trialling it on casual rental gives you hands-on experience to guide purchase decisions.

Recover costs more quicklyGenerally rental payments are fully tax deductable and the expense can be recovered far more quickly than the tax allowances for ongoing asset depreciation.†

Eliminate running costsThe expense of maintaining, calibrating and warehousing your test and measurement equipment can be high. With rental you avoid these costs, as well as freeing up storage space within your premises.

Cost allocation is simplifiedRental payments are easy to track and account for in your business, making it easy to allocate appropriate costs to departments, clients or specific projects.

Respond to sudden demandsAt peak periods, for unexpected projects, or when essential equipment breaks down, rental can put the necessary equipment in your hands ensuring seamless operations.

Apply new technologies and avoid obsolescenceRental allows you to update your equipment in line with other businesses and take advantage of new technologies. It also avoids the potential cost of owning equipment that can be quickly superseded.

Preserve creditRenting avoids the potential cost of utilising credit facilities such as an overdraft or credit cards, which are often used for equipment purchases.

Technical supportWhen you rent from TechRentals you’ll have the support of an experienced team of product experts, who’ll help you get the most from your equipment. And in the unlikely event of equipment failure we will do our utmost to rectify the issues as soon as possible.

†Please ensure you obtain independent professional taxation advice.

Save time and reduce your real costs. Find out all about our Configuration and Download solutions on page 23

This resource centre provides manuals, technical information, and how-to videos. Visit www.techrentals.com.au and select Technical Tips and Videos.

1

2

3

4

5

6

7

8

9

10

22

General Index

AAC See Electrical PowerAccelerometer 54Adhesion Tester 52Air Flow 58, 59, 65, 67 Quality 58, 59, 65, 67Air Balancing Hood 58, 59Air Conditioner Valve Balancing 59Air Conditioning Coolant Flow 69 Electronic Manifold 59 Measurement 58 Valve Balancing 59Air Conditioning & Air Flow 58Air Quality Monitoring 58, 64, 65, 67 Particles 65 Pressure & Humidity 58, 65Air Quality & Heat Stress 65Airborne Dust & Particle Meter 65Aircraft Maintenance Pitot Static Tester 49 Wireless Air Data Test Set 49Alcohol (BAC) Breath Tester 64Alignment 41, 42, 54Anemometer 58, 59Antenna & Cable Test 14, 16Antennas 17Appliance Tester 25Area Heat Stress 65, 67

BBalancing Machinery 59Balometer 58, 59Barometric Logger 69Bath Constant Temperature 42Battery Management Systems 37Blast Logger 56Body Vibration Measurement 54, 56Bore Hole Water Quality 68, 69Borescopes 40Breath Analyser 64Breath Tester 64Bridge LCR 9

CCable Fault Locators 24 LAN Test 18, 19 Locators 18, 19, 24, 60, 61 Testers 18, 19Cable & Fault Locators 60Cable & Pipe Tracers & Fault Locators 24Cable Analysers 18Cable Identification Kit 24Cable Locators 60Calibrator Current 10, 42, 47 Current Loop 10, 42, 45, 46, 47 Dry Block Temperature 42, 47 Electronic 10 Fitting Set 45 Hydraulic 42, 44, 47 Industrial 42, 47 Intrinsically Safe Loop 45 Laboratory 46 Loop 42, 47 Pneumatic Instruments 42, 47 Pressure 42, 44, 45, 46, 47 Process 42, 45, 46, 47 Resistance 10, 42, 45, 46, 47 Temperature 42, 46, 47 Voltage 10, 42, 45, 46, 47Camera Endoscopes 40 High Speed 41 Pipe Inspection 40, 62 Thermal Imaging 39, 40 Video 41Carbon Dioxide (CO2) 51, 64, 65, 67Carbon Monoxide & Nitrogen Dioxide

Monitors 64Carbon Monoxide (CO) 51, 64, 65, 67Cat 5, 5E, 6 18, 19Charge Amplifier 54Chart Recorders 47, 49Chlorine Meters 68Circuit Breaker Analyser System 35Circuit Breaker Testers 34, 35Circuit Tracer 24Clamp-on Sensors 31Clean Room Monitors 65Cleaver - Fibre Optic 22Coating Thickness 52Combustion Gas Analysis 51Combustion, Flue & Industrial Gas Analysers 51Communication Test Sets 16Compressor Output Flow 67 Quality 67Concrete Cover Meters 60Concrete Hardness Testers 60Concrete Testing Adhesion 52 Corrosion 60 Cover Meter 60 Reo Depth 60 Test Hammer 60Concrete Testing Equipment 60Concrete Thickness Gauges 60Confined Space Entry 64, 65Construction 58 Air Conditioner Valve Balancing 59 Air Conditioning & Air Flow 58 Concrete Testing Equipment 60 Distance Measurement & Surveying 62 Pipeline & Cavity Inspection 62 Underground Services Location 60 Utility Leak Detection 61Current Clamp 30, 31, 32 DC Source 9 Injection 35, 36 Input Logger 48 Loop 42, 46, 47 Meter 30, 31, 50, 69 Primary Injection 35, 36 Probe 9, 31, 32 Secondary Injection 35 Transformer (CT) 31Current Clamps Probes & Accessories 31, 32Current Injectors 35, 36Current Supply Unit 35Current Transformer Testing 34

DData & Telecommunications 18 LAN Cable Test 18, 19 DSL/POTS Test Set 20 Fibre Optic Launch Cables & Patch Leads 23 Fusion Splicers 22 LAN Cable Testers 18 LAN/WAN Analysers 19 Light Sources & Power Meters 20 OTDR & Fibre Inspection 22 PDH/SDH Analysers 19Data Loggers 48, 49DC High Voltage 9, 31, 32, 33DC Power Supplies 9, 10DC Power Supplies & Loads 9, 10DC Source 10Decade Resistance Box 10, 46Demand Analysers 27Dewpoint 65, 67Digital Multimeters 8Digital Storage Oscilloscopes 8, 9Distance Measurement 62Distance Measurement & Surveying 62Dry Block Calibrators 47DSL/POTS 20DSn/PDH Ethernet Analysers 20Duct Leakage Testers 58Ductors 25, 27Dust Measurement 65

EE & H Field Strength Meter Gauss 10, 11E & H Field Strength Meters 10, 11E1/E3 Tester 19, 20Earth Leakage 25, 32, 33, 34Earth Testers 25Electrical Cable Test 25, 32, 33, 34 Surge Generator 24 TDR 24 Thumper 24Electrical Installation & Test Appliance Tester 25 Earth Leakage (RCD) 25, 32, 33, 34 High Voltage Test (Hipot) 32, 33 Insulation Oil Testers 33 Insulation Test 24, 25, 32, 33, 34 Resistance Test 25, 27, 32 Soil/Ground Resistance 25 VLF Testers 33Electrical Power 24 Battery Management Systems 37 Cable & Pipe Tracers & Fault Locators 24 Circuit Breaker Testers 35 Current Clamps Probes & Accessories 31 Current Injectors 35 Electrical Testers 24 Insulation Testers & Meggers to 20kV 32 Micro-Ohm Meters & Earth Testers 25 Oil, Hipot & VLF Testers above 20kV 33 PAT Testers & RCD Testers 25 Power Analysers & Recorders 27 Power Transformers & Variacs 37 Protection Relay Testing Systems 36 Transformer Testers 34Electrical Power Generation & Transmission Current Injection 35 High Voltage Test (Hipot) 33 Power Quality 24, 27, 30, 31 Protection Relay Test 35, 36Electrical Power Quality Harmonics 24, 27, 30, 31 Power Factor 24, 27, 30, 31 Power Loggers 27, 30 Power Quality Analysers 27, 30Electrical Power Sources Battery Management Systems 37 Current Injectors 35Electrical Testers 24Electrical Transducers 24Electrochemistry 68Electrometers 8Electronic Calibrators 10Electronic Load 9, 10Electronics 8 DC Power Supplies & Loads 9 Digital Storage Oscilloscopes 8 E & H Field Strength Meters 11 EMC & Power Disturbance Simulators 11 Electronic Calibrators 10 Function Generators 9 Gauss/Tesla Meters 10 Laboratory Calibrators 10 LCR Meters 9 Multimeters& Electrometers 8 Probes & Accessories 9 TV Test Equipment 10Electrostatic Charge Measurement 8Electrostatic Meters 8EMC & Power Disturbance Simulators 11EMC Test Equipment 11EMC/EMI Test Equipment 11Endoscopes 40, 41Endoscopes Borescopes Visual Inspection 40Environmental & OHS Air Quality & Heat Stress 65 Airborne Dust & Particle Meters 65 Environmental Gas & Vapour Meters 64 Environment Flow Meters 69 Light Meters, UVA/B/C Measurement 69 Moisture & Humidity Meters 67 Noise & Sound Analysers 67 Personal Gas & Vapour Monitors 64 Radiation Monitoring & Protection 68

www.techrentals.com.au

3

General Index

Water Quality, pH Meters & Weather Stations 69Electrochem 68Environmental Flow Meters 69Environmental Gas & Vapour Meters 64Environmental Noise 67Environmental Noise Loggers 67Ethernet Analysers 19Ethernet Loopback 19Ethernet Testers 19Ethernet Test Sets 19Etherscope 19Excavator Cable Locators 60

FFault Locators 24, 60Fault Loop Impedance Testers 25Fibre Inspection & Analysis Probes 23Fibre Inspection & Test Kit 22, 23Fibre Inspection-Capture Probes 22, 23Fibre Optic Launch Cables & Patch Leads 18, 23Fibre Optics 18, 23 Cleaver 22Field Strength Meters 10, 11 Gauss 10, 11 RF 11Flaw Detectors 52Flow Hoods 58, 59Flow Meters 50, 69 Compressed Air 50 Doppler 50 Gas 50 Liquid 50, 69 Non-Intrusive 50 Open Channel 50, 69 Transit Time 50, 69 Ultrasonic 50, 69Flow Meters for Liquids & Gases 50Flue Inspection 40, 62Force Gauges 54Formaldehyde Meter 64Four Pole Soil Resistivity Testing Kit 25Frequency Counters 12Frequency Response Analysers 34, 35Function Generators 9Fusion Splicers 22

GGamma Radiation 68Gas 64 Carbon Dioxide (CO2) 51 Carbon Monoxide (CO) 51 Flammable (LEL) 64, 65 Formaldehyde 64 Hydrogen Sulphide (H2S) 64, 65 Methane (CH4) 64 Nitric Oxide (NO) 51 Nitrogen Dioxide (NO2) 51 Oxygen (O2) 51, 64 Ozone (O3) 64 Petroleum Hydrocarbons 64 Refrigerant 64 SF6 64 VOC 64Gas & Vapour Meters 64Gas Analysis & Monitoring 51, 64, 65Gauss/Tesla Meter 10, 11General Industrial 38 Combustion, Flue & Industrial Gas Analysers 51 Data Loggers 48 Endoscopes Borescopes Visual Inspection 40 Flow Meters for Liquids & Gases 50 High Speed Video Inspection Cameras 41 High Speed Waveform Recorders 47 Industrial Process Calibrators 42 Infrared Thermal Imaging Cameras 39 Laser Rotational Shaft Alignment 41 Pressure Vacuum Gauges/Recorders 49 Strip Chart Recorders 47 Tachometers/Stroboscopes 41 Temperature Meters/IR Thermometers 38 Wet & Dry Block Calibrators 47

HHardness Testers 52Harmonics (Power) 27, 31Hart Communicators 45Heat Stress 65, 67High Frequency Spectrum Analysers 12, 14High Speed Video Inspection Cameras 41High Speed Waveform Recorders 47High Voltage Insulation Dielectrics Test Set 33, 34Hipot Testers 32, 33Holiday Detector 52, 54Hot Wire Anemometer 58, 59Humidity Concrete 60 Indoor Air 65, 67 Logging 48, 49 Natural Gas 67 Thermohygrograph 65 Weather 69HVAC & IAQ 58, 59, 65, 67Hydraulic Pressure 42, 44, 52

IIlluminance Meter 69Inclinometers 54Indoor Air Quality 65, 67Industrial Process Calibrators 42, 47Infrared Cameras 39, 40Infrared Thermal Imaging Cameras 39Infrared Thermometers 38Injection Test Set 36Instrumentation Amplifier 47Insulation Diagnostic Analysers 34Insulation Testers 25, 32Insulation Testers & Meggers to 20kV 32, 33Intrinsically Safe Current Loop Calibrator 42 Gas Monitor 64, 65 Moisture Analyser 67 Photo-Ionisation Detector (PID) 64IR Thermometers 38

LLaboratory Calibrator 46LAN Analysers 19 Cable Certification 18, 19 Cable Testers 18, 19LAN Analysers/Management 19LAN Cable Testers 18LAN/WAN Analysers 19Landfill Gas Monitor 64Laser Distance & Speed 56, 62Laser Rotational Shaft Alignment 41LCR Meters 9Leak Detectors Electrical 61 Fluid 61 Gas Pipe 61, 64 Mechanical 61 Microwave Oven 68 Refrigerant 64 Water 61Light Measurement 62, 69Light Meters, UVA/B/C Measurement 69Light Source 20Light Sources & Power Meters 20Linear Position Transducers 54Liquid Flow Meters 50Load Cells 54Loggers (also see Recorders) 48 Accessories 48 Autoclave 48 Data 48, 49 Explosion 56 Flow 50 Humidity 48, 49 Multifunction Switch/Measure Unit 49 Temperature 48, 49Luminance Meter 69Lux Meter 69

MMachinery Balancing 54 Vibration 54, 56Magnetic Field Meters 10, 11Manometers 58, 59Material Hardness Testers 52Memory Recorders 47, 48Methane Monitors 64Micro-Ohm Meters 25, 27Micro-Ohm Meters & Earth Testers 25Microwave Leakage Detectors 68Microwave Oven Survey Meters 68Modified Atmosphere Packaging Test 51, 64Modular Power System Mainframe 10Moisture Wood 60Moisture & Humidity Meters 67Moisture Analysers 67Multimeters 8Multimeters & Electrometers 8

NNatural Gas 67Network Analysers Antenna & Cable Test 14, 16 Cable Test 14 Power 27, 30 RF 14Network Analysers 14, 16Network Analysers/Antenna & Cable Test 14Noise & Sound 67Noise & Sound Analysers 67Noise Loggers 67Non-Destructive Testing (NDT) 52

OOccupational Health & Safety 64 Air Quality 58, 59, 65, 67 Appliance Testing 25 Confined Space Entry 65 Formaldehyde 64 Heat Stress 65, 67 Lighting 69 Noise & Sound 67 Ozone 64 Radiation 11, 68 UV Exposure 69 Vibration 54 Volatile Organic Compound (VOC) 64Oil Insulation Testers 33, 34Oil, Hipot & VLF Testers Above 20kV 33Optical Power Meters 20Oscilloscopes Digital Storage 8, 9 Portable 8OTDR 22, 23OTDR & Fibre Inspection 22OTDR, FC & Fibre Accessories 22, 23Oxygen & CO2 Analyser 51, 64Oxygen (O2) 51, 64Ozone (O3) 64

PPancake Load Cell 54Particle Counters 65PAT 25PAT Testers & RCD Testers 25PDH Analysers 19, 20PDH/SDH Analysers 19Personal Gas & Vapour Monitors 64Petrochemical Contamination 64pH Measurement 68pH Meters 68pH reading for Meat Standards 68pH, mV & Temperature Measurement 68Photo-Ionisation Detector (PID) 64Physical Measurement 52 Material Hardness Testers 52 Non-Destructive Testing 52 Position Transducers 54 Inclinometers 54 Force Gauges 54

1800 632 652

4

General Index www.techrentals.com.au

Load Cells 54 Vibration Analysis 54 Speed Measurement 56Pinhole Detectors 52Pipe Locators 60Pipeline & Cavity Inspection 62Pipeline Camera Inspection System 62Pipeline Inspection 40Pitot Static Testers 49Pitot Tube 58Probes & Accessories 9Portable Appliance Testers 25Portable Residue Chlorine Meters 68Position Transducers 54POTS 20Power (Also see Electrical Power)Power Analysers 27Power Analysers & Recorders 27Power Demand Analysers 27Power Disturbance 24, 27, 30, 31Power Loggers 27, 30, 31Power Meter - RF 16, 17Power Meters 16Power Meters & Sensors 16, 17Power Supplies - DC 9, 10Power Transformer Testers 34Power Transformers 37Pressure Calibrators 42, 44, 45, 46, 47 Circular Chart Recorder 49 Indicator/Gauge 49 Logging Gauge 49 Wireless Air Data Test Set 49Pressure Calibrators 45Pressure Recorders 47Pressure Transducers 45Pressure Vacuum Gauge/Recorders 49Primary & Secondary Test Systems 35Primary Current Injection Test System 35Probes Current 9, 31, 32 High Voltage 9Process Calibrators 45, 46, 47Profibus 45Protection Relay Test 35, 36Protection Relay Testing Systems 36Pulse Porosity Detectors 54Pump 42, 44, 46

RRadar Speed Gun 56Radiation Monitor 11, 68Radiation Monitoring & Protection 68Radiation Monitors 68Radio Frequency 12 Antennas 17 Communication Test Sets 16 Frequency Counters 12 Network Analysers/Antenna & Cable Test 14 Power Meters - RF 16 RF Accessories 17 RF Amplifiers 17 RF Attenuators 17 RF Signal & Sweep Generators 12 Spectrum Analysers - High Frequency 12Radiometer 69RCD Test 25, 32Recorders 48 Chart 47,49 Memory 47, 48 Pressure 47, 49Refrigerant Leak Detection 64Relay Test 35, 36Resistance Calibration 10, 42, 46, 47 Decade 10, 46 Ground/Soil 25 Micro-Ohm 25, 27 Static 32 Tester 25, 32, 33, 34RF 12 Amplifiers 17 Antenna/SWR 14, 16, 17

Antennas 14, 16, 17 Attenuator 17 Communication Test Sets 16 E & H Field Strength Meters 10, 11 EMC/EMI Test 11 Field Strength Meters 10, 11 Frequency Counters 12 Network Analyser 14 Power Meters 16 Radiation Monitor 11, 68 RF & Microwave Accessories 17 Sensor 16, 17 RF Accessories 17 Signal Generators 12 Spectrum Analyser 12 Sweep Generators 12Rotating Balancing 54, 56RTD Calibrator 42

SSafety Bolt Inspection System 54Scopemeter 8, 9SDH Analysers 19Sensors - RF 16, 17Shaft Alignment 41, 42, 54Shaker Table 54Signal Analysis Software 17Signal Generators 12 RF 12Smoke Generating Machine 58Soil Resistivity 25Sound Dose Meter 67 Measurement 67 Signal Analysis 67 Sound Level Meter 54, 56, 67, 68 Vibration 54, 56Spectrum Analyser High Frequency 12, 14 RF 12, 14Speed Measurement 56Splicer - Fibre Optic 22Startup Current 30, 32Static Discharge Generator 11STM1 ... STM64 19, 20Strip Chart Recorders 47Stroboscope 41Surge Generator 24Surge Transient Generator EMC/EMI Test 11Sweep Generators 12

TTachometers 41Tachometers/Stroboscopes 41Tan Delta Measurement 33, 35TDR 24Telecommunications 18, 19 Access Tester 19, 20 CDMA 17 Data Tester 19 PDH 19 POTS 20 SDH 19Temperature Humidity Logging 48, 49 IR Thermometers 38 Probe 38 Thermometers 38, 39Temperature Bath 47Temperature Meters 38Temperature Meters/IR Thermometers 38Tesla/Gauss Meters 10Test & Tagging 25Thermal Imaging Camera 39, 40Thermohygrograph 65Thickness Gauge 52Time Domain Reflector TDR 24TPH Monitor 64Tracking Generator 12Transducers Electrical 24 Position 54Pressure 49

Transformer Insulation Moisture Analyser 35Transformer Testers 34, 35Transient Burst 11Transport Inclinometers 54Turbidity 68, 69TV Test Equipment 10

UUltrafine Particle Counters 65Ultrasonic Probes 52Ultraviolet Test Lamp 52Underground Services Location 60Utility Leak Detection 61UV Exposure 69UV Radiation 52

VValve Balancing (Air Conditioning) 59Variacs 37Vehicle Volume & Speed Counter 56Ventilation Meters 59Vibration Accelerometer 54 Analyser 54, 56 Blast Logging 56 Table 54 Whole Body 54Vibration Analysis 54Vibration Calibrators 56Vibration Loggers 56Video Endoscopes 41 High Speed 41 Pipeline Inspection 40, 41, 62Visual Inspection 40, 41, 62Volatile Organic Compounds (VOC) 64Voltage Calibrator 42, 47

WWAN Analysers 19Water Depth 50, 68, 69 Flow 50, 69 pH 68 Quality 68 Sampling 68Water Quality, pH Meters & Electrochem 68Water/Oil Bath Temperature Calibrators 42Water/Oil Temperature Bath 47WBGT 65Weather 69Weather Stations 69Wet & Dry Block Calibrators 47Wind Speed & Direction 69Wind Turbine Lightning Protection Test Lead Set 27Winding Transformer Meter 34Wireless Air Data Test Set 49Wood & Masonry Testing Moisture Meter 60Workplace Safety (Also See Environmental & OHS)

XX-Ray Measurement 68

Can’t see what you’re looking for?

New items are being added to the inventory constantly, so please

call us on 1800 632 652 to discuss your requirements

5

Manufacturers Index

AARONIAAAR,HF-60105 12

ABACusABB,CB2000 24

ACTERNAACT,MTS8000 20

ADVANTEsTADV,U3771 12

AEROQuAlAER,500L 64

Ah sysTEMsAH,SAS-200/571 17AH,SAS-571 17

AIRFlOWAIR,PITOT-36 58

AlCOlIZERALC,WM3 64

AlNORALN,EBT-721-A3 58ALN,EBT-731 58

ANRITsuANR,ANTENNA 17ANR,MS2711A 12ANR,MS2712E 14ANR,MS2721A 14ANR,MT9083A SM-MM 22ANR,MT9083B 22ANR,MW82119B-2100 14ANR,MW82119B-850 14ANR,S331D 14ANR,S331E 14ANR,S331E-21 14ANR,S331L 16ANR,S332D 16ANR,S332E 16ANR,S332E-CMAP-MOD 16ANR,S820D 16ANR,WAVEGUIDE-ADAP 16

ANTANT,DIRECTIONAL YAGI 17ANT,OMNIDIRECTIONAL 17

AQuAAQU,SNAKEEYE3 62

ARlARL,NGARA 67

BEAMEXBEA,MC5 42BEA,MC5-IS 42BEA,MC6 42

BElBEL,4190 10BEL,5180 10

BIRDBIR,43 16BIR,ELEMENT-HF 17

BIR,ELEMENT-LF 17

BRuEl & KJAERBK,4448-IS-3KIT 67

BW hONEyWEllBW,BUMP 65BW,GA-NH3-KIT 65BW,GA-SPAK 65BW,MICROCLIP 65

COM-POWER CORPORATIONCOM,AH-118 17

CRysTAl ENGINEERINGCRY,NVISION-30-NATA 42CRY,XP21-100-NATA 49CRY,XP21-300-NATA 49CRY,XP2I CAL KIT 1 42CRY,XP2I CAL KIT 345 42CRY,XP2I CAL KIT 690 44CRY,XP2I CAL KIT 7 42CRY,XP2I-10K 49CRY,XP2I-10K-NATA 49CRY,XP2I-1K-NATA 49CRY,XP2I-3K 49CRY,XP2I-3K-NATA 49

CsCOPE INTERNATIONAlCSC,DXL2-SGV2 24CSC,DXL2-SGV2 60

CONCEPT sMOKE sysTEMsCSS,COLT4 58

DATATAKERDE,CANGATE 48DE,DT80 48DE,DT80M 48DE,DT85 48

DEFElsKO CORPORATIONDEF,POS-200ADV 52DEF,POS-6000 52DEF,POSITEST 52

DETECDET,W8066 52

DIMMER DOTDIM,D201P 37VAR,D-283-OB 37

DKK-TOA CORPORATIONDKK,RC-31P-DP 68

DRANETZ-BMIDRA-BMI,TR2510 31

DRuCKDRU,DPI104-350 44DRU,DPI603-20 44DRU,DPI610-2 44DRU,DPI610-20 44DRU,DPI610-2-NATA 44DRU,DPI610-400 44DRU,DPI610-400-NATA 44DRU,DPI611-2 44DRU,DPI611-20 44DRU,DPI611-20-NATA 44

DRU,DPI611-2-NATA 44DRU,DPI615-20-NATA 44DRU,DPI620-1000 45DRU,DPI620-20-NATA 44DRU,DPI620-350 44DRU,DPI620-350-NATA 44DRU,DPI705 58DRU,DPI705-7BARA 58DRU,DPI705-IS 58DRU,GENII 45DRU,PV411A 45DRU,UPS III-IS 45

EAsy-lAsEREAS,D525 41

EA TEChNOlOGyEAT,ULTRATEVPLUS 32

ElCOMETERELC,331-B 60ELC,331-SH 60

EMERsONEME,375 45EME,475 45

ENIENI,604L 17

ETMETM,9900 48

EXFOEXF,FTB-860G 19EXF,PPM352_FIP400 20EXFO,ETS-1000L 19EXFO,PPM350B 20

FIBREOPTICFIB,LAUNCH MM 50UM 23FIB,LAUNCH MM 62.5UM 23FIB,LAUNCH SM 9UM 23FIB,MTFS15-1000 40

FITFIT,HP 45FIT,LP 45

FITElFIT,S123M12 22FIT,S178_S325 22

FIXTuRElAsERFIX,DIRIGO 41FIX,PAT 41

FlEXIMFLE,G608 50

FlIR sysTEMsFLI,E60 39FLI,E60-II 39FLI,E8 39FLI,T390 39

FluKEFLU,1523-NATA 39FLU,1587 32FLU,1625-KIT 25

FLU,1630-EARTH CLAMP 25FLU,1653 32FLU,1735 30FLU,199C-SCOPEMETER 9FLU,199C-SCOPEMETER-204 9FLU,2042 24FLU,289 FLUKEVIEW 8FLU,28II-EX 8FLU,345 27FLU,376 31FLU,435 30FLU,481 68FLU,52-2 38FLU,54-2B-FVF 38FLU,5500A 10FLU,5500A-NATA 10FLU,572-2 38FLU,700P08-70BAR 45FLU,700P31-690BAR 45FLU,700PD3-345 MBAR 45FLU,700PD6-7BAR 45FLU,719-100G 45FLU,719-30G 45FLU,725 46FLU,725-NATA 46FLU,726 46FLU,753 46FLU,754 46FLU,773 46FLU,789 PROCESSMETER 46FLU,80K-40 9FLU,810 54FLU,87-5 8FLU,90I-610S 31FLU,9144-NATA 47FLU,9150-NATA 47FLU,9170-NATA 47FLU,9170-R 47FLU,9170-R-NATA 47FLU,975 65FLU,DSX-5000 18FLU,DSX-MM 18FLU,DSX-MM EF LEADS 18FLU,DSX-MMSM 18FLU,DSX-SM 18FLU,DTX1800 19FLU,DTX-SFM2 19FLU,EI-162BN 25FLU,FI-1000-KIT 22FLU,FI-7000 22FLU,FTK1000 20FLU,I5SPQ3 31FLU,I-PROBE 9FLU,OPTIFIBER-PRO Q 22FLU,OPTIFIBER-PRO-MM 22FLU,Ti125 40FLU,Ti25 40FLU,Ti32 40FLU,Ti32_WIDE-ANGLE 40FLU,TIS55 40FLU,VR1710 30

FuJIKuRAFUJ,FSM60R-CT30 22FUJ,FSM60S-CT30 22FUJ,FSM70S 22

FuTEKFUT,IHH500-20T 54FUT,IHH500-2T 54

1800 632 652

66

Manufacturers Index www.techrentals.com.au

GCDATACONCEPTsGCD,X500-2 54

GENERAl DyNAMICsGD,R8000B 16

GE MEAsuREMENT & CONTROlGE,ADTS542F 49GE,DYNAMIC 52GE,EVEREST CA-ZOOM 62GE,EVEREST PTZ-140 62GE,EVEREST PTZ-70 62

GE PANAMETRICsPAN,C-LP-40NM 50PAN,GC-RL302 50PAN,GC-RL319 50PAN,OKS 50PAN,PM880 67PAN,PT878 50PAN,PT878E 50PAN,PT878GC-01 50PAN,PT878T 50

GEOTEChGEO,GEM5000 64

GlOBAlGLO,FP111 69

GlOi ABGLO,ALISENSOR 54

GENRADGR,1433-20 10GR,1433B-NATA 10GR,1433F-NATA 10GRA,GR150-S5-NATA 47

GRIDsENsECHK,CR100 31CHK,PM20 27CHK,PM30PLUS 27CHK,PM35 27CHK,PM40PQA 27

GTI sPINDlEGTI,IPAD3VAB 56

hAGNERHAG,EC1-X 69

hIlTIHIL,HAT28M 54HIL,PS1000 60HIL,PS200 FERROSCAN 60HIL,PS250 60HIL,TESTER4 54

hIOKIHIO,3169-21 CT500AMP 30HIO,3169-21CLAMPONPT 30HIO,3169-21CT1000AMP 30HIO,3196-PQA 30HIO,3196PQA-CT1000A 30HIO,3198 30HIO,3285 31HIO,3290 32HIO,3360-21 30HIO,3404 41

HIO,3423 69HIO,3455HVIT-5KV 32HIO,3554 37HIO,3641-20-KIT 48HIO,8421-51 48HIO,8841 47HIO,8842 47HIO,8860 48HIO,8938 48HIO,9322-KIT 48HIO,9335 48HIO,9660CT100A 32HIO,9661 CCT-500A 32HIO,9661-01 CCT-500A 32HIO,9694CT5A 32HIO,LCR 3532-50 9HIO,LR8431-20 48HIO,PW3360-21 30

hIPOTRONICsHIP,880PL 33

hIGh VOlTAGE INCHIV,PFT1003 33HIV,PFT301CM 33HIV,PFT503 33

hOlADAyHOL,HI-3604 11HOL,HI-3627 11

hPI CyPhERHPI,CYPHER5000 68

hV DIAGNOsTICsHVD,HVA TD60 33HVD,HVA30-DC/VLF 33HVD,HVA60-DC/VLF 34HVD,HVA90_DC-VLF 34

hyDROlABHYD,MS5 68

hyDROlOGICAl sERVICEsHYS,OSSB1 69

IFR AusTRAlIAIFR,2945B 16

IKEGPsIKE,300PRO 62

IlIILI,1400ABC 69

ION sCIENCEION,GASCHECKG3 64

IsAISA,CBA1000 35

IsCOISCO,6712 68

JDsu/VIAVIJDSU,ANT5-STM16 19JDSU,ANT5-STM4 19JDSU,EDT-135 19JDSU,FIBER_INSPECT 22JDSU,HST-3000 DSL 20

JDSU,MTS-2000-FCOMP 22JDSU,MTS-4000-FCOMP 23JDSU,OLP-55 20JDSU,OLP-87 PRO 20JDSU,OLS-55 20JDSU,P5000i 23JDSU,SMARTCLASS-E1-D 20JDSU,SMARTCLASS-ETH 19

JOFFRAJOF,CTC-1200A 47JOF,CTC-650A 47JOF,DPC-1000-NATA 46

KEysIGhTKEY,33612A 9KEY,34461A 8KEY,34980A 49KEY,53181A 12KEY,5350B 12KEY,66332A 10KEY,6675A 9KEY,6702A 10KEY,8449B 17KEY,8494/5B 17KEY,8495D 17KEY,8648D 12KEY,8648D-1E5 12KEY,89601B 17KEY,DSOX3024A 8KEY,E4416A 16KEY,E4418B-001 16KEY,E4438C 12KEY,E5071C 14KEY,E9300A 16KEY,E9300B 16KEY,MSO6104A 8KEY,N5181B 12KEY,N9030A 12KEY,N9913A 14KEY,N9344C 12KEY,N9344C-TG 12KEY,U1253B 8KEY,U1620A 8

KIKusuIKIK,PLZ1003W 10KIK,TOS-5101 32

KINGFIshERKIN,KI28010_2600 20

KRAuTKRAMERKRA,DYNAPOCKET 52

MARCONIMAR,6910 17MAR,6913 17MAR,6970 17

MARTINDAlEMAR,PSCI424-585 24

MECMEsINMEC,AFG-1000NALC 54

MEGGERMEG,CAL300 34MEG,CI-KIT 24MEG,CSU600AT 35

MEG,DET2/2 25MEG,DET4TC2 25MEG,DET4TCR2 25MEG,DLRO-100LEAD 27MEG,DLRO10X 25MEG,DLRO200 27MEG,DLRO600 27MEG,DLRO-LEADSET 27MEG,EZ-THUMP12 24MEG,IDAX300 34MEG,INGVAR 35MEG,MIT1020-10KV DIT 32MEG,MIT1025 33MEG,MIT1525 33MEG,MIT525 32MEG,MOM2 27MEG,MTO330 34MEG,OTS80PB 34MEG,PAT420 25MEG,RCDT330 25MEG,S1-1052 10KV-DIT 33MEG,S1-552 5KVDIT 33MEG,SVERKER780 36MEG,SVERKER9--E 36MEG,TDR2000/2RM 24MEG,TM1760 35MEG,TTR320-47 34

MEGGER (PROGRAMMA)PRO,SVERKER760 36PRO,TORKEL-840 37PRO,TORKEL-860 37PRO,TXL870 37

MEGGER (MulTIAMP)MUL,MS-2 35

MElMEL,M5-200 54

METRElMET,IT3017INSTALTEST 25

MONARChMON,PLT200-KIT 41

NARDANAR,8217 68NAR,NBM-520 11NAR,NBM-550 11NAR,RADMAN 68

NOVATEChNOV,1637-5 51

NTI AuDIONTI,NT-DAS 67NTI,XL2+M2210 67

OlyMPusOLY,27MG 52OLY,38DL 52OLY,D790-SM 52OLY,EPOCH600 52OLY,IPLEX-LT 3.5 41OLY,IPLEX-LT 7.5 41OLY,IPLEX-MXII 41OLY,IPLEX-RT 7.5 41OLY,IPLEX-UL 41OLY,ISPEEDLT 41

7

Manufacturers Index

OLY,SERIES-C 41PAN,26MG 52

OMICRONOMI,CMC256-6 36OMI,CMC256PLUS 36OMI,CMC356 36OMI,CMC356_61850 36OMI,CMGPS 36OMI,CPC100PTS 35OMI,CPCB2 35OMI,CPCU1 35OMI,CPSB1 35OMI,CPSTEP 35OMI,CP-TD1 35OMI,CTANALYZER 34OMI,DIRANA 35OMI,FRA 34

ORIFlOWORI,COBRA 58

PCWIPCW,DC30 52PCW,P40-PULSE 54

PETROsENsEPET,PHA-100 64

PhANTOMPHA,53550 56

PhENIX TEChNOlOGIEsPHE,BK130 34

POlysONICsPOL,HYDRA-SX30-2 50

PONOVOPON,CT200I 35PON,L336I 36

PPM TEChNOlOGIEsPPM,HTV-M 64

PROCEQPRO,2000-ND 60PRO,PROFOSCOPE 60PRO,RESIPOD 60PRO,SIL-UN 60PRO,PL-200E 60

PROTIMERPRO,MMS-PLUS 60

PROFOuNDPRO,VIBRA 56PRO,VIBRA-PLUS 56

PRuFTEChNIKPRU,AL12.116 42PRU,ROT-ULTRA 42

RAE sysTEMsRAE,MR3000 64RAE,PPB3000 64

RF sysTEMs lABRFS,VJ-ADV 41

Rh sysTEMsRH,973-SF6 64

RIsER BONDRB,1205T-OSP 24

RIONRIO,NL52EX-NX42RT 68RIO,VA-11 56RIO,VA-12 56

RKI INsTRuMENTsRKI,EAGLE2 65

ROhDE & sChWARZRS,FSH3-TG 14RS,NRT 17

ROTOThERMROT,C105 47ROT,C105-6K 47

ROVERROV,HD COMPACT 10

sEWARDSEW,XE3760PKIT+ 25

sChAFFNERSFN,438 11SFN,MODULA 6100 11

sI PREssuRE INsTRuMENTsSI,PC6-20-NATA 46SI,PC6-35-NATA 46

sOFTINGSOF,PROFIBUS-4 45

sORENsENSOR,DCS150-20E 10SOR,DCS60-50 10SOR,XFR600-4 10

sVANTEKSVA,SV100 56

T&R TEsT EQuIPMENTT&R,CIT 36T&R,DVS3-HP 36

TEKTRONIXTEK,MDO3104 9TEK,P6015 9TEK,TDS3054 9TEK,THS730A 9TEK,TPS2014 9

TEsTOTES,175-H1 49TES,184G1-KIT10 49TES,335 51TES,350XL 51TES,417 58TES,420 58TES,445 58TES,635-2 67TES,635-2-HPD 67TES,645-1 67TES,845 39

TES,SAV2-H2-10KIT 49

TMsTMS,9110D-WOB 56

TOuR & ANDERsONTA,CBI 59TA,SCOPE 59

TPsTPS,90FL-T 68TPS,WP-80M 68TPS,WP-88 69

TRTR,RF-CONN 17TR,VIBLOG 56

TsITSI,7565 67TSI,8324 58TSI,8375 59TSI,8380 59TSI,8386A 59TSI,8525 65TSI,8530 65TSI,8530-ENC 65TSI,8530-ENC-S 65TSI,8533 65TSI,8554 67TSI,8710 59TSI,9535 59TSI,9555 59TSI,9565A 59TSI,AM510 65TSI,TA465A 59

uE sysTEMsUES,UP3000 61

VAIsAlAVAI,WXT520-KIT 69

VAN EssENVAN,DI502 69

VEEXVEE,TX-130+ 20VEE,TX-130E+ 20VEEX,MX100E+ 19VEEX,TX-130M+ 20

VEhIClE COuNTsVEH,PC2500 56

VERMAsONVER,222ES 8

VIVAXVIV,VCAM5-60M 62VIV,VLOCPRO 61VIV,VLOCPRO 61

WIKAWIK,GA-15 64

WOhlERWOH,VIS2000PRO 62WOH,VIS340 62WOH,VIS340-PT 62

WOH,VIS350-PT 62

yOKOGAWAYEW,51001-NATA 69

1800 632 652

Can’t see what you’re looking for? New items are being added to

the inventory constantly, so please call us on 1800 632 652

to discuss your requirements

8

Electronics www.techrentals.com.au

Multimeters & Electrometers Digital Storage OscilloscopesProbes & AccessoriesFunction GeneratorsLCR MetersDC Power Supplies & LoadsTV Test EquipmentElectronic CalibratorsGauss/Tesla MetersE & H Field Strength MetersEMC & Power Disturbance Simulators

Multimeters & Electrometers

Multimeters & Electrometers cont’d.

See also Electrical Testers on page 24

Fluke 28II EX Intrinsically Safe True-RMS MultimeterFLU,28II-EX (1239) AU

Intrinsically Safe Multimeter is a completely sealed IP67 rated case. For use inside and outside of hazardous zones. Measures up to 1000V, 10A AC and DC with true-RMS for accurate measurement on nonlinear signals. Frequency measurements to 200kHz, resistance, conductance, diode test, capacitance, and temperature. Results are displayed on the bright, 4-1/2 digit LCD (20,000 counts).

See also Data Loggers on page 48-49

Fluke 87-5 Industrial True-RMS Multimeter with ThermometerFLU,87-5 MY

Unique function for accurate voltage and frequency measurements on adjusatable speed motor drives and other electrically noisy equipment.True-RMS AC voltage and current for accurate measurements on non linear signals. Built in thermometer. Measure up to 1,000VAC and DC. Measure up to 10A (20A for 30 seconds). 10,000µF capacitance range. Frequency to 200kHz and % duty cycle. Peak capture to record transients as fast as 250μs. 4½ digit mode.

Fluke 289 True-RMS Logging Multimeter with FlukeView Software

Keysight U1253B OLED Digital Multimeter

Keysight 34461A Digital Multimeter 6½ Digit Truevolt

FLU,289 FLUKEVIEW (1236) AU

KEY,U1253B (1225) AU

KEY,34461A (1230) AU

Complete with a built-in data logger to record measurements unattended. Internal memory allows stand-alone logging for up to 180 hours. True rms 50,000-count ¼ VGA dot matrix display. 0.025% Basic DC accuracy. CAT III 1000V/CAT IV 600V safety rated. Supplied with FlukeView software and download cable.

True RMS 4.5 digit handheld digital multimeter (DMM). Up to 0.025% basic DCV accuracy. Organic LED (OLED) display that provides razor-sharp readings even in dark, off-angle situations. Internal logging and virtual unlimited data recordings to PC with the data-logging software included. Integrated 20MHz frequency counter, and a built-in programmable square-wave generator with selectable frequency and duty cycle. Safety rating CAT III 1000V and CAT IV 600V. Smoothing function. Internal logging memory 1000 Points.

Precision 6.5 digit multimeter. 100% drop-in 34401A compatibility, graphical views of your measurement results, long-term trends and measurement histograms for a statistical view. Control, capture and view your DMM’s data on your PC. Measures noise and injected current, input bias current, AC RMS (3Hz to 300kHZ), DC and AC V (100mV to 1000V), resistance (100Ω to 100MΩ), frequency, period, continuity, diode (5V), current and temperature. Using TrueVolt technology the analogue to digital convertor displays results on a clear 11cm hi-res display.

Vermason 222541 Electrostatic MeterVER,222ES (1245) AU

Electrostatic meter for periodic audits of facilities, monitoring packaging, materials, machines and other electrostatic generative equipment or processes. This precision field meter is designed to measure electrostatic voltage potentials over selected distances from 1 to 20cm. Range at the standard distance of 2cm is 20kV. Two range 3 digit display in V or kV.

Digital Storage Oscilloscopes

Keysight DSOX3024A Oscilloscope 200MHz 4 ChannelsKEY,DSOX3024A (1350) AU

4 channel 200MHz digital storage oscilloscope. Sampling rate 2G/s (4G/s half-channel interleaved mode). 2Mpts memory depth, waveform update rate 1 million waveforms/s, sensitivity 1mV/div to 5V/div. Built-in 20MHz function/arbitrary waveform generator. Pass/fail masks can be automatically created based on an input reference waveform or on a PC then imported via USB, also store and remove waveforms via USB.

Keysight MSO6104A 1GHz Digital Oscilloscope with LogicKEY,MSO6104A (1320) AU

1GHz 4 + 16 channel mixed signal oscilloscope (MSO). 4Gsa/s. XGA Colour display updates 100,000 waveforms/s with 256 levels intensity. 4 analogue channels & 16 logic channels. Deep memory. 8 digit frequency counter function. Triggering includes video, HDTV, I2C, SPI, LIN, CAN, & USB. FFT analysis included. LAN, USB, GPIB, & XGA interfaces standard. NATA Certified.

With up to 2GSa/s sampling rate and 2 Mpts memory depth, this 200MHz two channels handheld scope captures more waveforms from signals such as pulse width modulated circuit, in rush, transient, and motor start up sequences. Channel to channel isolation with CATIII 600 V safety ratings, 10,000-count resolution on DMM display and data logging capability to PC.

Keysight U1620A 200MHz Handheld Digital OscilloscopeKEY,U1620A MY

9

Electronics

Digital Storage Oscilloscopes cont’d. Probes and Accessories

Fluke 199C 200MHz 2 Channel Scopemeter with DMMFLU,199C-SCOPEMETER (1360) AU

200MHz bandwidth 2 channel colour digital oscilloscope with DMM feature. 14.4cm colour display with persistence feature. 2.5GS/s real time sampling. Input sensitivity 5mV/div to 100V/div. Glitch capture 3ns using pulse width triggering. Timebase range in scope mode 5ns/div to 2min/div. Trigger types Auto, Free Run, Single Shot, Edge, Delay, Video, Video line, Selectable pulse width and External. Automatic capture and replay of last 100 screens. Measures electrical power properties such as VA VAR, etc. Isolated inputs.

200MHz 2.5GS/s (1.25GS/s 4ch), 4 channel digital oscilloscope. Features Persistence mode, Connect-and-View triggering for intelligent, automatic triggering on fast slow and complex signals. 10,000 points per trace waveform capture (scope mode), USB host port for direct data storage, automatic capture and replay of 100 screens. Roll mode gives 30,000 points per channel for low frequency signal analysis, TrendPlot paperless recorder. Isolated inputs and safety rating CAT III 1000V/CAT IV 600V.

Fluke 200MHz 4 Channel ScopeMeter 190-204/SFLU,SCOPEMETER 204 (1361) AU

Tektronix MDO3104 1GHz Mixed Domain OscilloscopeTEK,MDO3104 MY

1Ghz, 4 channel oscilloscope with 50MHz arbitrary function generator, 16 logic channels and a 3GHz spectrum analyzer. Sampling rate 5GS/s, 10M record length. FasAcq feature allows for intensity grading of rarely occurring events, such as runt pulses, glitches, timing issues, and more. USB support for transferring or saving results and settings and PC control using OpenChoice software.

Tektronix TDS3054B 500MHz 4 Channel DSO

Sampling rate 5GS/s. Memory length 10k. Sensitivity 1mV to 10v/div. Time base 1ns to 10s/div. Trigger functions include video. Extensive automatic waveform measurements. Including FFT, TV trigger, advanced analysis (TDS3AAM), and limit testing (TDS3LIM). Battery operation.

TEK,TDS3054 MY

Tektronix THS730A 200MHz Battery DSO

Tektronix TPS2014 100MHz Channel Powerscope

TEK,THS730A MY

TEK,TPS2014 (1370) AU

Dual channel battery portable 200MHz digital storage oscilloscope with digital multimeter facilities. Maximum sampling rate 1GS/s. Maximum input 640V rms, maximum float 600V rms. Waveform processing including watts calculations. Video trigger. RS232 interface.

Sampling rate 1GS/s. All 4 channels isolated for floating measurements. Sensitivity 2mV to 5V/div. Measurements for current and voltage distortion and their spectral content, harmonics, instantaneous power, power factor and switching loss. Automatic waveform measurements. FFT, power analysis, low & high voltage power probes (P5120). Battery operation.

Current clamp for oscilloscopes which uses a Hall effect cell for the measurement of DC or AC current. Measures currents from 0.05 to 100A peak. A thumbwheel can be used to reset zero for adaption to the measurement environment. The clamp can be used with any measurement instrument which has a BNC input and an impedance of 1MΩ, <100pF. Maximum conductor diameter, 11.8mm.

Fluke 80i-110s AC/DC Current ProbeFLU,I-PROBE (1460) AU

Fluke 80K-40 High Voltage Probe

Tektronix P6015 40kV High Voltage Probe

FLU,80K-40 (1480) AU

TEK,P6015 (1490) AU

1 to 40kVDC or peak AC, 28kVAC RMS. Input resistance 1GΩ, division ratio 1,000:1. Note: input impedance of DVM must be 10MΩ or reading will be wrong.

Bandwidth 75MHz. Input rating: 40kV pulse, 20kVDC plus peak AC. Derating with frequency applies. Input impedance 100MΩ. Attenuation x 1000.

Keysight 33612A 80MHZ 2 Channel Waveform GeneratorKEY,33612A (1612) AU

80MHz, 2 channel waveform generator, sine, square, pulse, ramp, triangle, Gaussian noise, PRBS and arbitrary waveforms. Capable of modulation, sweep, burst, waveform summing and combining. Maximum output into 50Ω, 1mVpp to 10Vpp. Up to 120MHz sine and Gaussian noise at <= 4 Vpp. Memory is 4M Samples deep.

See also RF Signal & Sweep Generators on page 12

Function Generators

LCR Meters

Hioki 3532-50 5MHz LCR MeterHIO,LCR 3532-50 (1290) AU

Frequency range 42Hz to 5MHz. 5ms high speed measurements. Basic accuracy of ±0.08%. Memory for 30 sets of measurement conditions, including comparator values. Includes correlation correction function, interactive touch panel operation and enlarged display function. Applications include laboratory use for evaluation of operating characteristics, production line use or R&D. Measurement data captured by a personal computer can be displayed graphically by using standard spreadsheet software.

DC Power Supplies & Loads

Keysight 6675A DC Power SupplyKEY,6675A MY

102VDC, 18A, 2000W, auto-parallel up to five units, output can be connected in series, programmable over-voltage and over-current protection, over-temperature protection, Discrete Fault Indicator/Remote Inhibit (DFI/RI), self-test occurs at power-on from an GPIB command, user definable power-on state and VXI plug & play drives.

1800 632 652

10

Electronics www.techrentals.com.au

DC Power Supplies & Loads cont’d.

Kikusui PLZ1003W Electronic LoadKIK,PLZ1003W (8110) AU

1000 watt electronic load. Voltage range 1.5 to 120V. Current range 0 to 200A. Provides constant current, resistance, voltage, and power modes (CC/CV/CR/CP). A multiple number of setting conditions can be stored in memory. Sequence function allows setting conditions to be changed automatically. Applications include characteristic or lifetime tests of a variety of DC voltage sources such as switching power supplies, primary and secondary batteries or as burn in loads.

Keysight 66332A Dynamic Measurement DC SourceKEY,66332A MY

Programmable DC Source. 0 to 20V, 0 to 5A. Built-in advanced measurement system to accurately measure battery current drains. Battery emulation function.

Keysight N6702A Low Profile Modular Power System MainframeKEY,N6702A MY

Modular power system mainframe comes with 2 x N6762A precision DC power modules(100 watts), 1U high. Each modules capable of 0 to 50V, 0 to 3A. GPIB, LAN, and USB, interfaces standard, and LXI compliance.

Sorensen DCS 150V, 20A DC Power SupplySOR,DCS150-20E (8130) AU

0-150V, 20A, 3KW. Applications range from manufacturing test and burn-in of automotive components, avionics electronics, telecommunications and consumer products to beam steering, process control, laboratory R&D use. Remote control via LAN or RS232.

Sorensen DCS60-50 60V 50A DC Power SupplySOR,DCS60-50 (8140) AU

0 to 60V, 0 to 50A. Maximum power on a 240V three phase supply is 3kW. Maximum power on a one phase 240V supply is 2.5kW. On One phase 50V@50A or 60V@42A. Remote programming.

Sorensen XFR 600-4 600V 4A Power SupplySOR,XFR600-4 (8120) AU

2.4kW programmable DC power supply 0~600V, 0~4A with remote analog programming.

TV Test Equipment

Rover HD Compact Combined TV AnalyserROV,HD COMPACT (1748) AU

For the installation, maintenance and commissioning of terrestrial, satellite and cable TV systems DVB T/C/S/S2. The HD Rover can perform measurements that include power level, MER, BER, noise margin, SNR, EVM, network and streams ID’s as well as MPEG4 HD programs for DVB-T & C. The meter has a USB port for, software upgrades, channel plan modifications and data logging. Foxtel approved.

See Network Analysers/Antenna and Cable Test on page 14, 16

Electronic Calibrators

Gauss/Tesla Meters

See also Industrial Process Calibrators on page XX

Fluke 5500A Multi Product Calibrator with NATA CalibrationFLU,5500A-NATA (1660) AUFLU,5500A MY

Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous voltage outputs or voltage & current. Simulates power with phase control, resistance, capacitance, thermocouples and RTDs. Selectable ranges include the following outputs VDC from 0 to 1.02kV, VAC from 1mV to 1.02kV with output from 10Hz to 500kHz. AC current from 0.01µA to 11A with output from 10Hz to 10kHz. DC current from 0 to 11A. Resistance values from short circuit to 330MΩ. Capacitance values from 330pF to 1,100µF. Temperature t/c B, C, E, J, K, L, N, R, S, T, U, RTD Pt385 100Ω, Pt3926 100Ω, Pt3916 100Ω, Pt385 200Ω, Pt385 500Ω, Pt385 1kΩ, Ni120 120Ω & Cu427 10Ω.

Genrad 1433B 1.1MΩ 6 Decade Resistance GR,1433B-NATA (1670) AU

Six decades by 1Ω to 1.1MΩ. Accuracy 0.01%. NATA calibrated.

Genrad 1433F 111kΩ 7 Decade Resistance BoxGR,1433F-NATA (1680) AU

Seven decades by 0.01Ω to 111kΩ. Accuracy 0.01% +0.002Ω. Useful for platinum resistance thermometer calibration. NATA calibrated.

Genrad 1433-20 11.1111kΩ 6 Decade ResistorGR,1433-20 MY

Six decades by 0.01Ω per step to 11.1111kΩ. High accuracy 0.01% up to 10MΩ steps. Low temperature coefficient, 5ppm/˚C. Good frequency characteristics, excellent stability (10ppm/yr, 25ppm/3yrs), low zero resistance (1MΩ per decade). May be used for RTD stimulation. Rack mount option.

FW Bell Gauss/Tesla MeterBEL,4190 (1969) AU

Handheld digital ELF gauss meter. Maintains accuracy regardless of orientation. Applications include detecting magnetic field emissions from overhead AC power lines, video display terminals, office equipment and household appliances. Analogue o/p, data logging, auto range 0.1 to 1999 mG, minimum resolution 0.1mG/.01 uT.

FW Bell 5180 Gauss/Tesla MeterBEL,5180 (1960) AU/MY

Magnetic measuring equipment, portable gaussmeter. Built-in software eliminates the need for complex calibration procedures. Key features include Auto Zero, Min/Max/Peak Hold, Auto Range and Relative Mode. Allows the user to select Gauss, Tesla or Ampere/Meter readings. With Hall effect transverse probe STD18-0404. Frequency bandwidth DC - 30kHz, range from 0 up to 30 kG with a basic accuracy of 1.1% (FS). Analogue output (+/-3V FS) and USB interface. Battery operated.

11

Electronics

TechRentals works in conjunction with industry leaders like Fluke, Megger, Omicron, Keysight, GE and Anritsu to provide training opportunities across a wide range of sectors including:

• Electrical Power• General Industrial Testing• Physical Measurement

These partnerships allow TechRentals to offer training seminars, instrument specific tutorials, and other content in various formats to enhance the technical experience and skills of our customers. Of particular value are our training short courses, the latest of which have included transformer testing, power quality analysis, and Australian fibre and copper standards (with an introduction to encircled flux). These valuable seminars provide insights into the latest equipment and protocols, with hands on demonstrations on how they benefit industries in the field. Please email training@techrentals.com.au to be kept informed of upcoming courses.

• Data and Telecommunications• Construction• Radio Frequency

• Electronics• Environmental and OH&S

Visit our wiki for product manuals, how-to videos, and application notes at https://sites. google.com/a/techrentals.com.au/wiki/

Check out our YouTube site for over 100 training, practical demonstration and technical information videos at http://www.youtube.com/techrentals

E & H Field Strength Meters cont’d.E & H Field Strength Meters

See also Radiation Montioring & Protection on page 68

Holaday HI-3604 E & H Survey Meter ELFHOL,HI-3604 (1945) AU

Low frequency field meter. Designed to evaluate electric and magnetic fields associated with 50Hz power lines. Frequency range 30 to 2,000Hz. Measures magnetic fields from 0.1 milligauss to 20 gauss. Measures electric fields from 1 volt/meter to 200 kilovolts/meter. LCD display. 127 reading data memory.

Holaday HI-3627 Magnetic Field MeterHOL,HI-3627 (1980) AU

Three orthogonal field sensors. Dynamic range 0.2mG~20G. True RMS detection. Frequency range 5Hz to 2kHz with an in-built 30Hz high pass filter. Meets requirements of the Swedish protocol and the IEEE P-1140 protocol.

Narda NBM-520 ‘E’ Field Strength Meter and Probe EF1891NAR,NBM-520 (1925) AU

Field strength meter with EF1891 ‘E’ field probe. Detects electric fields from 3 MHz to 18 GHz, covering fields generated by broadcasting, telecoms, radar and any other transmission sources within this range. Dynamic range from 0.6V/m to 1,000V/m. Applications include measuring field strengths to comply with general safety regulations and actual radiated power. Includes fibre optic cable with optical to electrical converts for remote monitoring.

Narda NBM-550 ‘E’ Field Strength Meter and Probe EF1891NAR,NBM-550 (1930) AU

Field strength meter with EF1891 ‘E’ field probe. Detects electric fields from 3 MHz to 18GHz, covering fields generated by broadcasting, telecoms, radar and any other transmission sources within this range. Dynamic range from 0.6V/m to 1,000V/m. Includes GPS, data logging, voice recording annotation and fibre optic cable with optical to electrical converts for remote monitoring.

EMC & Power Disturbance Simulators

Schaffner 438 30kV Static Discharge Generator

Schaffner Modula-6100 Immunity Test System

SFN,438 (8375) AU

SFN,MODULA 6100 (8380) AU

Generates an electrostatic charge in a range from 2 to 30kV. This instrument is in a ‘gun’ form. Has a removable discharge network which can be interchanged with other (optional) impedance networks. Performs test to IEC61000-4-2 (AKA, IEC 1000-4-2) standards.

Multifunction generator to simulate electro-magnetic field interference effects for immunity testing in conformity with international, national and in house standards including the new IEC/EN standards. Generates Interference pulses such as burst and surge and power quality simulations.

Training with TechRentals

1800 632 652

12

RF Signal & Sweep GeneratorsFrequency CountersSpectrum Analysers - High FrequencyNetwork Analysers/Antenna & Cable TestCommunication Test SetsPower Meters - RFRF AmplifiersRF AttenuatorsAntennasRF Accessories

Radio Frequency www.techrentals.com.au

RF Signal & Sweep Generators

Keysight 8648D-1E5 4GHz Signal GeneratorKEY,8648D (2330) AUKEY,8648D-1E5 MY

Signal generator, 9kHz to 4GHz with AM/FM/Phase modulation output range from +10 to -136dBm with +/-1dB accuracy up to 2.5GHz. 0.001Hz resolution. Complete with option 1E5 high stability timebase (<±0.1ppm/yr).

See also Function Generators on page 9

Keysight E4438C ESG Vector Signal Generator

Keysight N5181B MXG X-Series 6GHz RF Analog Signal Generator

KEY,E4438C MY

KEY,N5181B (2328 AU

Vector signal generator, 250kHz to 3GHz. Built-in function generator. Wideband AM and FM. Internal baseband generator(8 Msa), internal bit error rate analyser, GPS personality, waveform playback and 6GB internal storage.

MXG-X RF Analog Signal Generator, 9k to 6 GHz, -144 to +19dBm. Features fast switching, low phase noise, pulse, and narrow pulse, AM, FM, phase modulation and sweep. Applications include R&D, receiver and component testing. 1000BaseT LAN, LXI, USB 2.0, and GPIB interfaces.

Frequency Counters

See also Electronics on page 8

3 GHz frequency. Option 010 high stability timebase included. HPIB interface. PC based Benchlink meter software available.

Keysight 53181A 3GHz Frequency CounterKEY,53181A AU/MY

Microwave frequency counter. 10Hz to 20GHz. HPIB interface.

Keysight 5350B 20GHz Frequency CounterKEY,5350B MY

Spectrum Analysers - High Frequency

Aaronia Spectran HF-60105 9.4GHz Handheld Spectrum AnalyserAAR,HF-60105 MY

Portable. 9KHz to 9.4GHz comes attached with directional antenna. DANL -155dBm (1Hz) with preamp DANL -170dBm (1Hz). RBW 200Hz to 50MHz. Demodulator for AM/FM/PM/GSM. 1MB memory with USB interface for trace download. Maximum power +20dBm. Suitable for cellular walk or drive coverage testing.

Portable 9kHz to 31.8GHz spectrum analyser. 3 way power. Battery, 240V & DC. RBW 100Hz to 3MHz, sensitivity -117dBm@34GHz (typ). High-stability reference. Includes a wide variety of data analysis functions & zoom function. With signals applied to both Input 1 and Input 2, two signals such as an IF signal and a carrier can be measured. Support for USB for printer and memory. Storage image formats: PNG, BMP, configuration file BIN, XML.

Advantest 31.8GHz Portable Spectrum AnalyserADV,U3771 MY

9kHz to 20GHz with 5MHz to 7GHz tracking generator. -144dBm displayed average noise level (DANL), <0.95s sweep time for 20GHz full span. Average continuous power, +30dBm for 3 minutes maximum. Flexible remote control via USB/LAN. User memory 64MB, able to store approximately 14,000 traces.

9kHz to 20GHz with GPS. -144dBm displayed average noise level (DANL), <0.95s sweep time for 20GHz full span. Average continuous power, +30dBm for 3 minutes maximum. Flexible remote control via USB/LAN. User memory 64MB, able to store approximately 14,000 traces.

Keysight N9344C 20GHz Spectrum Analyser with Tracking Generator

Keysight N9344C 20GHz Spectrum Analyser with GPS

KEY,N9344C-TG (2537) AU/MY

KEY,N9344C (2538) AU

Real-time spectrum analyser, 3Hz to 26.5G with built-in Pre-Amp (+20dB) and electronic attenuator(24dB) both up to 3.6GHz. 8 inch XGA display. Run on Windows 7. USB storage port. Included software: N9051A-Pulse Measurement, N9036A-Analog Demodulation Measurement and N9064A-VXA Signal Analysis.

Keysight N9030A PXA Signal AnalyserKEY,N9030A MY

Portable. 9kHz to 3GHz. Light weight battery powered spectrum analyser with LCD. Resolution bandwidth down to 10kHz. Suitable for cellular telephone walk or drive tests to determine coverage and base station positioning. Can also be used for VHF/UHF signal surveying. N type connector.

Anritsu MS2711A 3GHz Portable Spectrum AnalyserANR,MS2711A MY

3 Ongoing Service and Maintenance• All equipment is tested and programmed by trained,

professional personnel before it is sent out

3 Battery Maintenance and Replacement Program• A battery maintenance program is provided throughout

the managed service period

• Periodic and/or as required testing and reconditioning, with immediate replacement of faulty batteries

3 Product Training and Support• TR Hirecom will develop and present a training package toensureallofyourstaffareconfidentandfamiliar with their new assets

• This training package will be delivered by experienced TR Hirecom staff in a ‘train the trainer’ style so key personnel can pass this on to their relevant staff

Read about Adelaide Brighton Cement’s upgrade to digital two way radios, and how a Managed Service transformed their onsite communications!

Managed Service Radio SolutionEnsure your radio communications are operating to their full potential with state-of-the-art Motorola two way radios. www.trhirecom.com.au

hirecomChannel Partner

1800 222 327 rent@trhirecom.com.au www.trhirecom.com.au

For more information, contact us today:

3 Radio Support Program • Trained and experienced staff are available to assist you with any queries, training requirements and/or troubleshooting you may have

3 Immediate replacement of faulty radios• We aim to have any faulty equipment replaced in a

time critical manner so on-site disruptions are minimised

3 Account Processing Minimisation• No Capex account process required

Equipment Upgrade Pathway As your two way radio needs change, TR Hirecom will work closely with you in evaluating your radio communications. With theabilitytoupgradeyourfleetandavoidobsolescenceat the end of your rental period, you can be assured that your communications systems will always be operational, with the very latest in two way radio technology.

A Managed Service with TR Hirecom includes the following:

14

Radio Frequency www.techrentals.com.au

Spectrum Analysers - High Frequency cont’d.

Anritsu MS2712E 4GHz Spectrum Analyser with Tracking GeneratorANR,MS2712E (2560) AU

Portable hand held spectrum analyser 9kHz to 4GHz, DANL -146 dBm in 1Hz RBW, RBW 1Hz to 3MHz. Tracking generator -50dBm to 0dBm in 0.1dB steps and GPS. Applications include, spectrum monitoring, broadcast proofing, RF and microwave measurements, Wi-Fi and wireless network measurements. Store up 2,000 traces and setups on board or on USB flash drive. One-button envelope creation, Trace Save-on-Event feature.

100kHz to 7.1GHz. For deploying, maintaining and troubleshooting wireless base stations and Wi-Fi (802.11a, b and g) systems, and general spectrum analysis. Smart measurements include channel power, adjacent channel power ratio, carrier to interference ratio and field strength. AM/FM/SSB demodulator included and internal speaker for monitoring. DANL -153 dBm at 1GHz. Phase noise -100dBc/Hz at 10KHz. Store unlimited traces and setups. Remote programming via Ethernet port.

Anritsu MS2721A 7.1 GHz Spectrum AnalyserANR,MS2721A (2550) AU

Handheld portable battery operated spectrum analyser 100kHz to 3GHz. Resolution bandwidth 1kHz to 1MHz. Less than -105dBm noise level (-114dBm typical). Suitable for RF surveying applications. Includes vector transmission and tracking generator options.

Rohde & Schwarz FSH3 3GHz Spectrum Analyser/Tracking Generator/Vector MeasurementRS,FSH3-TG MY

Network Analysers/Antenna & Cable Test

Network Analysers/Antenna & Cable Test cont’d.

2 port 9 kHz to 6.5 GHz network analyser with integral S-parameter test set. Dynamic range >123dB. High stability timebase. Applications for manufacturing and R&D engineers evaluating RF components and circuits for frequencies up to 6.5GHz. Calibration kit 85032F included. LAN/USB/GPIB connectivity.

Keysight E5071C-260 ENA Series Network AnalyserKEY,E5071C (2744) AU/MY

Cable and antenna analyser, frequency range 30kHz to 4GHz. Measures return loss, one-port cable loss, distance to fault, line sweeping, and VSWR. Applications include cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace, defence, and public safety applications. Includes, spectrum analyser (233), vector network analysis (210) with full 2 port S-parameters (211), QuickCal (112) and remote control capabilities.

Keysight N9913A FieldFox 4GHz Cable & Antenna AnalyserKEY,N9913A (2145) AU

Passive Intermodulation (PIM) analyser with measurement frequency 2,100 MHz and Site Master (cable and antenna analysis) options. Portable battery-operated, high power for the major wireless standards. Verify PIM performance at difficult to access sites such as Remote Radio Head (RRH) installations or indoor Distributed Antenna Systems (DAS). PIM measurements include PIM vs time, sweep PIM, distance to PIM (DTF), 1-port phase and smith chart.

Passive Intermodulation (PIM) analyser with frequency, Cellular 850MHz band and Site Master (cable and antenna analysis) options. Portable battery-operated, high power for the major wireless standards. Verify PIM performance at difficult to access sites such as Remote Radio Head (RRH) installations or indoor Distributed Antenna Systems (DAS). PIM measurements include PIM vs time, sweep PIM, distance to PIM (DTF), 1-port phase and smith chart.

Cable and antenna analyser with 2 port transmission option (21), frequency range 2Mhz to 4GHz. Measures return loss, VSWR, cable loss, and Distance To Fault. Suitable for legacy networks in addition to the new 3G and 4G networks being installed. Applications include cable & antenna installation and maintenance for wireless service providers.

Anritsu MW82119B 2,100MHz PIM Master with Site Master Option

Anritsu MW82119B 850MHz PIM Master with Site Master Option

Anritsu S331E 4GHz Sitemaster Cable & Antenna Ana w Opt 21

ANR,MW82119B-2100 (2198) AU

ANR,MW82119B-850 (2199) AU

ANR,S331E-21 (2179) AU

Antenna and cable test set. Frequency range 25MHz to 4GHz. Measures return loss, SWR, cable loss, and distance to fault. Return loss range 0 to 60dB. SWR range 1 to 65. Distance to fault range 1,197m. Insertion loss range -120 to +100dB. Cable loss range (one port) 0 to 30dB. N(f) Type port. Analysis software discs included containing distance to fault and Smith chart tools. Complete with calibration standard, AC/DC adaptor, and 12VDC car cigarette lighter adaptor.

Anritsu S331D 4GHz Colour Sitemaster AntennaANR,S331D MY

Cable and antenna analyser, frequency range 2Mhz to 4GHz. Measures return loss, VSWR, cable loss, and Distance To Fault. Suitable for legacy networks in addition to the new 3G and 4G networks being installed. Applications include cable & antenna installation and maintenance for wireless service providers.

Anritsu S331E 4GHz Sitemaster Cable & Antenna TesterANR,S331E (2180) AU/MY

C

M

Y

CM

MY

CY

CMY

K

44xxx_LMR_Master_Ad_A4_V1_HR_OL.pdf 1 08/10/15 05:59

16

Antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4GHz. DANL -152dBm. Options included, indoor outdoor Coverage Mapping, GPS Receiver and AM/FM/PM Analyser. Measures return loss, VSWR, cable loss, and distance to fault. Analysis software containing DTF and Smith chart tools included. Cable, antenna, installation and maintenance spectrum analysis, coverage mapping and AM/FM/PM demod for wireless service providers, contractors, military, aerospace and defence, and public safety applications.

Radio Frequency www.techrentals.com.au

Network Analysers/Antenna & Cable Test cont’d.

Cable and antenna analyser, frequency range 2Mhz to 4GHz. Built in power meter 50MHz to 4GHz, -33dBm to +20dBm. Measures return loss, VSWR, cable loss, and Distance To Fault. Suitable for legacy networks in addition to the new 3G and 4G networks being installed. Applications include cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace, defence, and public safety applications.

Anritsu S331L 4GHz Sitemaster Cable & Antenna AnalyserANR,S331L (2178) AU

Antenna and cable test set including spectrum analyser. Frequency range 25 to 4,000MHz. RBW 100Hz to 1MHz. Measures return loss, SWR, cable loss, and distance to fault. N(f) Type port. Analysis software containing DTF and Smith chart tools included. Complete with calibration standard, AC/DC adaptor, and 12VDC car adaptor.

Anritsu S332D Colour Sitemaster Antenna TesterANR,S332D MY

Antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4GHz. DANL -152dBm. Measures return loss, VSWR, cable loss, and Distance To Fault. N(f) Type port. Analysis software containing DTF and Smith chart tools included. Complete with calibration standard, AC/DC adaptor, and 12VDC car adaptor. Cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace and defence, and public safety applications.

Anritsu S332E Sitemaster including Spectrum AnalyserANR,S332E (2175) AU

Anritsu S332E Sitemaster Including Spectrum Analyser and Opt 431,31,509ANR,S332E-CMAP-MOD (2165) AU

Calibration components and wave guide to co-ax adaptors for Anritsu S820x Sitemaster. Set includes 1/8 and 3/8 shorts, termination, and waveguide to co-ax adaptor.

Anritsu Sitemaster Waveguide ComponentsANR,WAVEGUIDE-ADAP (2190) AU/MY

Microwave antenna and cable test set. Portable single port analyser, providing return loss (SWR) insertion loss and distance to fault measurements in the frequency range of 25MHz~20GHz. Unit comes standard with RS232 interface, Smith chart and software management tools, AC/DC and automotive adaptor. A comprehensive range of precision waveguide components and adaptors are available.

Anritsu S820D Microwave Sitemaster 25MHz to 20GHz ANR,S820D (2150) AU/MY

Communication Test Sets

Portable test instrument designed to monitor and service radio communications equipment up to 1GHz. It generates and receives signals, measures modulation and frequency, and performs a variety of tests on AM, FM, PM and optional digital standards P25, DMR, NXDN and TETRA radio transceivers. Features include, enhanced spectrum analyser, oscilloscope and tracking generator. Power handling capabilities without external attenuator is 50W for 5 min, up to a time limited 150W (see equipment specifications to avoid damage).

General Dynamics R8000B Communications AnalyserGD,R8000B (2380) AU

Communications Service Monitor is ideally suited to the testing of two way radios and trunking repeaters allowing verification of performance, and rapid diagnosis of faults. Includes a combination of test instruments such as a full performance spectrum analyser, oscilloscope and tracking generator. Frequency range 400kHz to 1.05GHz.

Aeroflex IFR 2945B Communications Service MonitorIFR,2945B (2390) AU

Power Meters - RF

Power sensor for HP EPM series power meters. E-series Average Power Sensor. 10MHz to 18GHz, 1µW to 100mW (-60dBm to +20dBm).

Keysight E9300A Power Sensor 1µW to 100mW, 10MHz to 18GHzKEY,E9300A (2125) AU/MY

Power sensor for HP EPM series power meters. E-series average power sensor. 10MHz to 18GHz, 1µW to 25W (-30dBm to 44dBm).

Keysight Agilent E9300B Power Sensor 1µW to 25W, 10MHz to 8GHzKEY,E9300B (2135) AU/MY

Power meter, for peak, average, peak-to-average ratio and time-gated measurements. 100µW to 25W (-70dBm to 44dBm), 9 kHz to 110GHz (power sensor dependent ), 4 digit display - watts, dBm, dB (rel). Analyser Software for complete pulse and statistical analysis. 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth™, IS-95 CDMA, W-CDMA and cdma2000). Comes with E9322A Peak & Average Power Sensor (50MHz to 6GHz, 1.5MHz bandwidth, -45dBm to +20dBm at Normal Mode).

Keysight E4416A EPM P-Series Power MeterKEY,E4416A MY

RF thruline power meter. Requires Bird element of specified frequency and power. Measures forward and reflected power by reversing the element.

Bird 43 Power MeterBIR,43 MY

Keysight E4418B E series power meter. 100uW to 25W (-70dBm to 44dBm), 9 kHz to 110GHz (power sensor dependent), 4 digit display - watts, dBm, dB (rel). Battery or mains powered. Power sensor required, select and specify when ordering.

Keysight E4418B E Series Power MeterKEY,E4418B-001 MY

17

Radio Frequency

Power Meters - RF

Power Meters - RF cont’d.

NiCd battery operated with digital display. Complete with AC adaptor. Requires sensor. Sensors available for 10MHz to 26.5GHz frequency range.

Marconi 6970 Digital Power MeterMAR,6970 MY

Frequency range 10MHz to 20GHz. Power range -30dBm to 20dBm(1μWto100mW).MaxRFi/p25dBm(300mW)CW42dBm(15W)peakfor2μs.Sensingelementsemiconductorthermocouple. VSWR 1.25: 10MHz to 30MHz, 1.1: 30MHz to 2GHz, 1.18: 2 to 16GHz, 1.28: 16 to 18GHz, 1.4: typical 18 to 20GHz. Linearity factor provided with sensor. Accuracy ±0.5% at 25˚C between 10 & 20dBm. Improves by a factor of 10 for each lower range. Calibration factor provided with sensor. Accuracy uncertainty provided with sensor. Resolution0.01%.RFconnectorprecisionN-type(M)50Ω.

Marconi 6910 Power SensorMAR,6910 MY

Frequencyrange10MHzto26.5GHz.Powerrange30dBm(1μW)to20dBm (100mW). Max 25dBm (300mW) CW, 42dBm (15W) peak for2μs.Sensingelementsemiconductorthermocouple.VSWR1.40: 10MHz to 50MHz, 1.15: 50MHz to 100MHz, 1.10: 100MHz to 2GHz, 1.15: 2 to 12.4GHz, 1.20: 12.4 to 18GHz, 1.25: 18 to 26.5GHz. Calibration factor provided at 1GHz intervals (500MHz intervals above 20GHz) with each sensor. Accuracy uncertainty provided with each sensor. Resolution 0.01%. Linearity factor accuracy ±0.5% at 100mW, decreasing by 0.005% per 1mW.

Marconi 6913 Power SensorMAR,6913 MY

Measures directional power forward and reverse under operational conditions. NRT-Z44 sensor included, range 3 mW to 120 W, 200 MHz to 4 GHz. Measurement method is compatible with all common analog and in particular digital modulation standards. GSM/EDGE, 3GPP (W-/TD-CDMA), CDMA (IS-95), CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB, DVB-T and many more.

Rohde & Schwarz NRT Power Reflection MeterRS,NRT (2140) AU

RF Amplifiers

Linear wideband RF power amplifier. 4W output at an input of 0.13mW from 0.5 to 1GHz. Saturated output 7W 0dBm input. Extended performance gives saturated output to a max of 16W at 10MHz and 12W at 100MHz typically.

High-gain (+30dB gain), low-noise preamplifier. Frequency range of 1 to 26.5GHz. Increases sensitivity of any microwave spectrum analyser for detection and analysis of very low-level signals. Improved sensitivity can reduce measurement time.

ENI 604L 4W Wideband 1GHz RF Amplifier

Keysight HP8449B Preamplifier 1GHz to 26.5GHz

ENI,604L (2803) AU

KEY,8449B MY

RF Attenuators

Antennas

RF Accessories

DC to 18 GHz. Comprises a connected set of types 8494B and 8495B with 11716A rigid interconnect kit. 8494B - 0 to 11db in 1db steps and 8495B - 11 to 81db in 10db steps. 3.5mm connectors.

Frequency range DC to 26.5GHz. 70dB step attenuator in 10dB steps. Max continuous power 1W. 3.5mm connectors.

Keysight 8494/5B Coaxial Step Attenuator Set 81dB x 1dB

Keysight 8495D 70dB 26.5GHz Step Attenuator

KEY,8494/5B MY

KEY,8495D MY

MP534A dipole antenna 25 to 520MHz and MP651A 470 to 1700MHz.

Various directional Yagi antennas. Frequency rangers from 824 M (UHF) to 2.17 GHz (UHF).

Various omnidirectional antenna types such as telescopic whip, folded dipole and monopole. Frequency rangers from 70MHz to 5.4GHz

Frequency range 1 to 18GHz, VSWR 2.0:1, Polarization: Linear, OutputImpedance:50Ω,connectortypesAntennaoutput:N(f).

Double ridge guide horn antenna. Frequency range 700MHz to 18GHz.Continuouspower300W.Impedance50Ω200V/mmaxradiated field. Type N(f) connector.

Anritsu Dipole Antenna Kit

Directional Yagi Antenna

Omnidirectional Antenna

COM Power Double Ridged Horn Antenna 1 to 18GHz

AH Systems SAS-200/571 Antenna

ANR,ANTENNA (1834) AU

ANT,DIRECTIONAL YAGI (1829) AU

ANT,OMNIDIRECTIONAL (1826) AU

COM,AH-118 MY

AH,SAS-200/571 (1840) AUAH,SAS-571 MY

RF Connectors - Various Connector Types. BNC, TNC, VHF, FME, Mini UHF, N, MMCX, SSMB, MCX, SMB, SMC, SMA series and 7/16 DIN.

RF Connectors - Various Connector TypesTR,RF-CONN (2816) AU

A comprehensive set of software tools for demodulation and vector signal analysis. Measure and analyse signals in the time, frequency and modulation domains. Analyse data from over 40 supported hardware instruments, or use in simulation tools to verify design. Included license: 200-Basic Vector Signal Analysis, 300-Hardware Connectivity, AYA-Vector Modulation Analysis and TEDS-Modulation Analysis. For you with N9030A PXA Signal Analyser.

Keysight 89601B Vector Signal Analysis SoftwareKEY,89601B MY

RF elements for Bird watt meters. Available in various power and frequency ranges.

Bird RF ElementBIR,ELEMENT-LF MYBIR,ELEMENT-HF MY

1800 632 652

18

Data & Telecommunications

LAN Cable TestersLAN/WAN AnalysersPDH/SDH AnalysersDSL/POTS Test SetLight Sources & Power MetersFusion SplicersOTDR & Fibre InspectionFibre Optic Launch Cables & Patch Leads

LAN Cable Testers

Fluke DSX-5000 Cable Analyser 1GHz Class FAFLU,DSX-5000 (3278) AU/MY

1GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE deployments and will certify shielded and unshielded structured cabling systems from Cat 3, to 7A and Class C, to FA at Level V accuracy. 9 second Cat 6 autotest. Built in Alien Crosstalk testing capability. PLA004 (Cat 6A / Class EA), CHA004 (Cat 6A/Class EA) adapters and LinkWare PC reporting software included.

Fluke CertiFiber Pro MM Optical Loss Test SetFLU,DSX-MM (3269) AU/MY

Multimode (CFP-MM-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850 and 1300 nm in 3 seconds. A set reference wizard ensures correct reference setting. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC. Measures fibre optic attenuation, length, and propagation delay. Includes built in VFL and Linkware software.

Kit of Encircled Flux MM Test Reference Leads for the DSX-MMFLU,DSX-MM EF LEADS (3385) AU/MY

Kit consists of Encircled Flux (EF) compliant test reference leads for ST 62.5µm (OM1) and SC, LC 50µm (OM3 & 4) fibre networks. Suitable for the multimode Fluke CertiFiber Pro Optical Loss Test Sets.

Fluke CertiFiber Pro MM-SM Optical Loss Test SetFLU,DSX-MMSM (3263) AU

Multi and singlemode (CFP-Q-ADD) optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 850, 1300, 1310 and 1550nm in 3 seconds (for 2 wavelengths). A set reference wizard ensures correct reference setting. Encircled Flux compliant as required by ANSI/TIA and ISO/IEC. Measures fibre optic attenuation, length, and propagation delay. Includes built in VFL and Linkware software.

Fluke CertiFiber Pro SM Optical Loss Test SetFLU,DSX-SM (3264) AU/MY

Optical loss test set modules for the Versiv DSX-5000. Provides Tier 1 certification at 1310 and 1550nm in 3 seconds. A set reference wizard ensures correct reference setting. Measures fibre optic attenuation, length, and propagation delay. Includes built in VFL and Linkware software.

DSX-5000 CableAnalyzer™

CertiFiber®

Pro

OptiFiber®

Pro OTDR

Email:

sales.au@flukenetworks.comPhone: 02 8850 3333

Faster systems acceptance for all copper and fiber

certification jobs.

Cabling Certification –

Versiv™

or rent@techrentals.com.au

19

JDSU/Viavi ANT 5 SDH/PDH Access TesterJDSU,ANT5-STM16 (3446) AU/MY

Data & Telecommunications

LAN Cable Testers cont’d.

LAN/WAN Analysers

LAN/WAN Analysers cont’d.

Fluke DTX1800 Cable Analyser 900MHz Cat 7FLU,DTX1800 MY

Category 7 cable certification tester up to 900MHz. Tests to Category 3, 4, 5, 5E, 6, 6a and 7. Cable analyser for use with shielded and unshielded twisted pair Cat 6 Autotest time of 12 seconds. Linkware PC software, and USB cable included. Internal memory stores results. Optional multimode & single mode OTDR module.

Fluke DTX-SFM2 Single Mode Fibre Adaptor for DTX Cable AnalyserFLU,DTX-SFM2 (3265) AU/MY

DTX1200/1800 single mode fibre interface. Use for testing fibre installations in local area networks. Fits in the slot on the back of DTX cable analyser (standard copper cable adaptors can be connected but not used simultaneously). Provides fibre testing and certification. Bi-directional testing at 1310nm and 1550nm at the same time. Measures optical power loss, length, and propagation delay for single mode fibres. Pass/fail results based on common fibre standards. SC optical connectors. Includes in built visual fault locator. (VFL)

EXFO ETS-1000L 10/100/1000 Ethernet LoopbackEXFO,ETS-1000L MY

Ethernet/Gigabit ethernet loopback unit ETS-1000L is intended for performing loopback at the physical, data link, network and transport layers of the OSI model. It allows carrying out loopback control via OAM protocol and remote control via TELNET protocol.

JDSU/Viavi Set of SmartClass 10M-1G Ethernet Testers

EXFO FTB-860G NetBlazer 10G Ethernet Tester

JDSU,SMARTCLASS-ETH (3220) AU

EXF,FTB-860G (3223) AU

Two SmartClass Ethernet(s) provided for comprehensive installation, turn up and maintenance of Ethernet IP services up to 1 Gbit. Performs bidirectional RFC 2544, asymmetric RFC, multiple streams testing, throughput, latency, frame loss, back-to-back frame and jitter. Applications include performance assessment of Carrier Ethernet services, activation and maintenance of metro Ethernet networks, deployment of active Ethernet (point-to-point) access services, traffic generation and QoS verification.

Performs 10 Gbps RFC 2544 measurements and EtherSAM (ITU-T Y.156sam), for turnkey deployment, validation, and troubleshooting of access and metro ethernet services. IPv6 testing capabilities BERT, RFC, traffic gen and through mode. NetBlazer offers GUI navigation, dedicated quick-action buttons, and clear notifications for accurate interpretation of test results.

PDH/SDH Analysers

JDSU/Viavi ANT 5 SDH/PDH Access Tester

Veex MX100E+ 1G Ethernet Test Set

JDSU,ANT5-STM4 (3445) AU/MY

VEEX,MX100E+ MY

Field tester for the installation, commissioning and fault finding of fibre and copper SDH/PDH networks from 1.5Mb/s to 2.5 Gb/s. Optical testing at dual wave lengths at STM-1, STM-4, and STM-16. Electrical testing at DS1/E1/E3/DS3/E4 and STM-1 interfaces. Full analysis of concatenated mappings. ATM analysis for service verification of ATM and 3G/UMTS networks.

VeEX MX100e+ is a full-featured Next Generation Mobile Backhaul and Carrier Ethernet Tester. Supports 10/100/1000Base-T on RJ45 port, 100Base-X/1000Base-FX on SFP(1310nm) port interfaces. Ethernet throughput testing at Layer 1, Layer 2, Layer 3 and Layer 4 without VLAN. Performs RFC2544, Multiple Streams, BER Test and VSAM (ITU-T Y.1564). MultiStream Throughput Test (Up to 8 independent bandwidth), Advance IP (PING, Trace Route, Web Test/FTP Test. ReVeal PC Software

Field tester for the installation, commissioning and fault finding of fibre and copper SDH/PDH networks from 1.5Mb/s to 2.5Gb/s. Optical testing at dual wave lengths at STM-1, STM-4, and STM-16. Electrical testing at DS1/E1/E3/DS3/E4 and STM-1 interfaces. Full analysis of concatenated mappings. ATM analysis for service verification of ATM and 3G/UMTS networks.

JDSU/Viavi EDT-135 E1 and Data TesterJDSU,EDT-135 (3450) AU/MY

Field service tester for commissioning, maintenance and troubleshooting of E1 PCM2Mbps and V.11/RS-442, V.24/RS-232, V.35,V.36/RS-449, EIA-530 data circuits operating at 50bps to 2Mbps. Provides framed & unframed monitoring, end-to-end testing, drop & insert, channel associated signalling; error & alarm analysis, S bit, NFAS & NMFAS monitoring & generation. Round trip delay measurement, G.821, G.826 & M.2100 quality of service measurements. Signal level measurement & primary multiplexer testing.

Fibre optic consumables are available for sale.Please ask for delivery when placing your rental order.

1800 632 652

20

Data & Telecommunications www.techrentals.com.au

PDH/SDH Analysers cont’d.

Acterna MTS 8000/T-BERD Transport ModuleJDSU,MTS8000 MY

Multirate interface for PDH-DS1/DS3/E1/E3/E4,STS-1 OC-3/12/48/48, STM-1e/1/4/16 and interface for OC-192 STM-64 with the ability to monitor down to the STS-1 level inside of any supported optical rate. Used for verifying and qualifying the performance of SDH and Gigabit ethernet, telecommunications networks. Electrical and optical interfaces at rates 1310/1550nm). Also supports the NewGen (ethernet over Sonet/SDH) and able to perform RFC2544. Ethernet IP testing with 10/100/100Mbps electrical RJ-45 Interfaces. Supports VLAN, Q-in-Q,VPLS,MPLS Tunnelling application. Comes with touch screen GUI operation. Measures optical power and frequency. Floppy drive installed.

JDSU/Viavi SmartClass E1/Datacom TesterJDSU,SMARTCLASS-E1-D (3440) AU

Handheld field tester for the installation and commissioning of E1 and Datacom services. Applications include (not limited to), G.703 - 2Mb/s testing, 2 M (Bulk), n x 64kb/s BERT, audio monitoring (VF drop & insert),ABCD/Sa monitoring, alarms (defects) and errors (anomalies) insertion, round-trip delay, DTE/DTE emulation and monitor mode. Interfaces with X.21, V.24 (RS-232), V.35, V.36 (RS-449), and EIA-530.

VeEx VePal TX130E+ DSn/PDH/Ethernet Analyser VEEX,TX-130E+ MY

Full-featured Mobile test solution supporting legacy PDH DSn and Carrier Ethernet technologies. Provides E1 and 1G Ethernet Testing according to RFC2544 standards.

VeEx VePal TX130M+ DSn/PDH/Ethernet Analyser VEEX,TX-130M+ MY

Full-featured Mobile Backhaul test solution supporting legacy PDH/DSn, Carrier Ethernet technologies, and Synchronized Packet networks. The unit is capable of emulating both Master and Slave clocks according to ITU-T G.8261 SyncE and IEEE 1588v2 standards. At the same time able to provide E1 and 1G Ethernet Testing according to RFC2544 standards. It has options of Pulse Mask, E1 Wander and MTIE&TDEV.

VeEx VePal TX130+ E1/Datacom TesterVEEX,TX-130+ MY

Handheld field tester for installation and commissioning of E1 and Datacom services. It is a small and compact unit.

DSL/POTS Test Set

Light Sources & Power Meters

With Broadcom Bonded module (SIM) for complete copper testing from POTS to full spectrum Very High Speed Digital Subscriber Line. Supports ADSL1, ADSL2, ADSL2+, VDSL2 and vectored VDSL2. Features include web browser, advanced IP suite, balance and capacitive open measurements, load coil detection, DVM, wideband impairment measurements, spectral analysis, POTS dialer with caller ID, fault locator and Pulse Echo Tester (PET).

TFTTx/PON power meter with P5000i inspection probe. Used for qualification, activation, inspection and troubleshooting of B-PON, E-PON, and G-PON networks. The FiberChek software and P5000i probe allow for pass/fail fibre inspection analysis and reporting. Ideal for end-of-line testing, activation, and maintenance of all FTTx/PON signals. The through-mode capability can simultaneously measure voice, data, and video signals on fiber at 1490 and 1550nm downstream and 1310nm burst mode upstream. Supplied with various tip adapters please inquire.

JDSU/Viavi HST-3000 ADSL2+/VDSL2

JDSU/Viavi SmartClass OLP-87 PRO Fiber PON Power Meter & VIP

JDSU,HST-3000DSL (3470) AU

JDSU,OLP-87 PRO (3350) AU

EXFO PPM-350B-EG PON Power MeterEXFO,PPM350B MY

OptimiSed for FTTx E & GPON. PPM350B has 10 user-definable threshold sets, each set consisting of three wavelengths (1310, 1490 and 1550 nm) having their own pass/warning/fail analysis features. Simultaneous measurement and display of all PON signals voice, data and video.

EXFO PON/FTTx Power Meter & Inspection Probe EXF,PPM352_FIP400 (3370) AU

Kit includes PPM-352B-EG-ER optimized for FTTx E & GPON & FIP-400 inspection probe with handheld display. PPM352 has 10 user-definable threshold sets, as well as pass/warning/fail analysis features. Simultaneous measurement and display of all PON signals voice, data and video.

Fluke FTK1000 Multimode Fibre Optic Light Source & Meter FLU,FTK1000 (3365) AU/MY

Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550nm single mode. Manage results and print reports via Power meter memory, PC and supplied software.

JDSU OLP-55 Optical Power MeterJDSU,OLP-55 MY

Optical Power Meter BN 2277/01 Power & Loss Measurement for installation, maintenance and repair of fiber optics networks. Display Range: -70 to +20dBm, calibrated wavelengths: 850, 1310, 1550 & 1650nm. Optical connection: FC.

JDSU OLSP-55 Optical Laser SourceJDSU,OLS-55 MY

Operates on dual wavelength of 1310nm and 1550nm. Output power is from -7 to 0 dBm. Optical Interface: FC-PC.

Kingfisher KI-28010 Single Mode APC Light Source and KI-7600 Power MeterKIN,KI28010-2600 (3361) AU

Singlemode light source KI-28010 and power meter KI-2600. Compatible with APC and PC singlemode networks. Wavelengths 1310, 1550 and 1625nm. Memory with text, timestamp and USB dump, real-time PC reporting software. Autotest provides fast, easy and automatic multi wavelength loss testing.

TR CalibrationAustralia’s Leading Calibration Laboratory

Benefit from our flexible calibration options

TR Calibration are specialists in the calibration and repair of test and measurement instrumentation within Australia. With an internationally recognised NATA accreditation to ISO/IEC 17025 on our calibrations, we will ensure your equipment is operating to the standards you need, when you need it.

Over the last three decades, TR Calibration has calibrated equipment from over 2,400 manufacturers. We are the authorised Service Agents for Barfield Aviation Ground Support Equipment, Megger Electrical, GEC Aircraft Weighing Platforms, and Stahlwille Torque products. TR Calibration is also the approved service centre for GE Measurement & Sensing (Pressure) products, including ADTS.

Alongside our in-house calibration, we can come to you and calibrate your equipment with our NATA and ISO accredited Mobile Calibration Laboratory.

With a number of options available for your instrumentation calibration, rest assured we can tailor a plan suitable for you and your business.

Ask about our Quality Calibration Price Guarantee

3 Booking Service

3 HyperCal Service

3 Standard Service

3 Complete Test Equipment Asset Management System

3 Mobile Calibration Laboratory

1300 790 480 info@trcalibration.com.au www.trcalibration.com.au

For more information, contact us today:

$

22

www.techrentals.com.au

Fusion Splicers

OTDR & Fibre Inspection

Data & Telecommunications

OTDR & Fibre Inspection cont’d.

Fitel S123M12 Ribbon Fusion Splicer FIT,S123M12 (3312) AU

Hand-held 12-core ribbon fibre fusion splicer. Protection sleeve shrink time is 35 seconds, while splicing requires only 15 seconds for 12 core ribbon fibre allowing up to 160 splicing cycles (splicing/heating) using the 2 battery packs installed in the main body. Includes, S325 cleaver and thermal jacket stripper.

Fitel S178 Fusion Splicer and S325 CleaverFIT,S178_S325 (3314) AU

S178 hand-held, core-alignment fusion splicer and S325 cleaver. Splicer provides typical losses of 0.02dB and 0.01dB on single and multimode fibre respectively. 7 second splice time, built in heater and tension test. Can be operated from battery or AC source. Precision fibre cleaver can be used with single & multimode fibres and features a built in sharps collection bin that automatically stores fibre off-cuts.

Fujikura FSM60R Ribbon Fusion Splicer, Cleaver, StripperFUJ,FSM60R-CT30 (3310) AU

12-core ribbon fibre fusion splicer. Splice time 20 sec, sleeve shrink time 40 sec, typically. Detachable work table and arc-free calibration system. Includes CT-30 fibre cleaver and thermal jacket stripper.

Fujikura FSM60S Splicer & CT30 CleaverFUJ,FSM60S-CT30 (3320) AU/MY

Typical splice losses of 0.02dB and 0.01dB on single and multimode fibre respectively. Features splice protection heater, detachable work table and arc-free calibration system.

Fujikura FSM70S Core Alignment Fusion SplicerFUJ,FSM70S (3318) AU/MY

Single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multimode fibre respectively. Automated tension test, wind and heater cover, 7 second splice time and 14 second heat time.

See also LAN Cable Testers on page 18

Anritsu MT9083B Access Master Singlemode OTDRANR,MT9083B SM (3336) AU

Complete testing of PON-based FTTx networks featuring up to 1x64 splits or single fibre runs. 1310, 1550 and 1625 wavelengths, dynamic range 40, 39 and 38 respectively. Intelligent analysis software identifies problem splices, connectors and even macrobends. 400x Video Inspection Probe (VIP) and 8 tips included. Active fibre verification. Store up to 1,000 traces in internal memory and up to 30,000 via your USB device.

Anritsu MT9083A Access Master SM and MM OTDRANR,MT9083A SM-MM (3337) AU

850/1300 nm (29/28dB) and 1310/1550 (39/37.5dB). Singlemode port is SC/APC. Intelligent analysis software identifies problem splices, connectors and even macrobends. Full 1×64 PON support. Store up to 1,000 traces internally (much more using USB), drop and drag results to PC.

Enables you to quickly inspect and certify fibre end-faces inside ports or patch cords. It’s 2-second automated PASS/FAIL certification eliminates human subjectivity. *Requires Versiv mainframe to operate such as the DSX-5000 (with or without fibre modules) or Optifiber Pro.

A fibre optic inspection scope that allows you to inspect and certify fibre optic connector end-faces in 2s. The inspection scope provides autoated PASS/FAIL certification in the VERSI main unit. Supplied with LC and SC probe tips.

Complete with JDSMTS-4136MA-FCOMP-SCA OTDR module. Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625nm wavelengths at 37, 35 and 35 dB dynamic range (respectively), includes power meter, NBN auto test sequences and fibre inspection probe. Performs insertion loss (IL), optical return loss (ORL) and OTDR from one optical port. Applications include bidirectional testing, trouble shooting and acceptance testing.

Fluke Networks FI-1000 FiberInspector Kit

Fluke FI-7000 FibreInspector Pro Video Probe

JDSU/Viavi MTS-2000 OTDR FibreComplete

FLU,FI-1000-KIT (3338) AU

FLU,FI-7000 MY

JDSU,MTS-2000-FCOMP (3335) AU

Fluke Optifiber Pro Multimode OTDRFLU,OPTIFIBER-PRO-MM (3343) AU

Multimode OTDR, wavelengths 850 and 1300nm. Designed for testing, troubleshooting and certifying multimode 50 and 62.5µm fibre optic networks. Smartphone user interface, shortest event and attenuation deadzones, LinkWare download and reporting software included.

Fluke Optifiber Pro Quad OTDRFLU,OPTIFIBER-PRO Q (3344) AU/MY

Multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm, dynamic range 28, 30, 32 and 30 dB respectively. Designed for testing, troubleshooting and certifying multi and singlemode 62.5, 50 and 9µm fibre optic networks. Smartphone user interface, shortest event and attenuation deadzones, LinkWare download and reporting software included.

JDSU/Viavi Fibre Inspection-Capture ProbeJDSU,FIBER_INSPECT (3340) AU

Handheld display, dual magnification (200/400x) probe and USB adaptor for fibre end-face image analysis and capture. Includes software and various probe tips.

23

Data & Telecommunications

OTDR & Fibre Inspection cont’d. Fibre Optic Launch Cables & Patch Leads

JDSU/Viavi MTS-4000 OTDR with E4136FCOMP-MAJDSU,MTS-4000-FCOMP (3334) AU

Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625nm wavelengths at 42, 40 and 40 dB dynamic range (respectively), includes power meter, VFL, NBN auto test sequences and fibre inspection probe. Performs insertion loss (IL), optical return loss (ORL) and OTDR from one optical port. Applications include bidirectional testing, trouble shooting and acceptance testing.

Automated fibre inspection and analysis probe provides pass/fail capability to PC, laptops, mobile devices and JDSU test solutions.

JDSU/Viavi P5000i Digital Certifier Video Inspection KitJDSU,P5000i (3339) AU

Launch Fibre Multimode 50µm 100m

Launch Fibre Multimode 62.5µm 300m

Launch Fibre Single Mode 9µm

FIB,LAUNCH MM 50UM (3380) AU

FIB,LAUNCH MM 62.5UM (3382) AU

FIB,LAUNCH SM 9UM (3378) AU

100 metres of 50µm fibre terminated with SC connectors. A launch fibre enables an OTDR to measure the loss of the first connector and adapts a 62.5µm OTDR to a 50µm network.

SC to SC multimode 62.5µm launch fibre.

Single mode 9µm SC launch fibre.

Setup and Download

Our technical staff can provide you with any downloaded data for you on a USB drive. These drives usually include PDF files, raw data files, and the appropriate software – everything you need for meaningful analysis.

Once you nominate the appropriate technical information, we take care of the rest. The downloaded files can be promptly forwarded to you, or collected at an arranged time that’s more convenient.

Equipment marked with the symbol is available to rent with this service. Fees vary depending on the complexity of operation and the level of detail involved.

Data management services are available for many

products. To the right is an example of what you can expect.

Learning to operate unfamiliar equipment costs you time and can lead to fundamental errors in the data capturing processing. Use a better solution - our Setup and Download service.

Save time and reduce your costs by using our data management services

Fluke DSX-5000 Cable Analyser

Setup:• Company name• Site• Tester• Setup of certification test limit• Cable type/fibre type

Results Downloaded:• Raw Fluke Linkware files• Linkware software• PDF report results

1800 632 652

24

Electrical Power www.techrentals.com.au

Cable & Pipe Tracers & Fault LocatorsElectrical TestersPAT Testers & RCD TestersMicro-Ohm Meters & Earth TestersPower Analysers, Loggers & RecordersCurrent Clamps Probes & AccessoriesInsulation Testers & Meggers to 20kVOil, Hipot & VLF Testers above 20kVTransformer TestersCircuit Breaker TestersCurrent InjectorsProtection Relay Testing SystemsPower Transformers & VariacsBattery Management Systems

Cable & Pipe Tracers and Fault Locators

See also Current Clamps Probes & Accessories on page 31-32

See also Underground Services Location on page 60

Cable and pipe avoidance and location tool with depth measurement. Simultaneous dual 33+131kHz frequency will assist in the detection of smaller buried pipes and cables such as telecoms, cast iron and street lighting spurs. 4 level power adjust up to 1 watt and depth detection to 3m (depending on soil type). Four detection modes; Power, Radio, Generator and Allscan. Features a Dynamic Swing Sensor to aid in cable and pipe location.

C.Scope DXL2 and SGV2 Cable and Pipe LocatorCSC,DXL2-SGV2 (3720) AU

Fluke Cable LocatorFLU,2042 (3602) AU

Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits as well as locating interruptions and short-circuits in cables and electrical floor heating systems. Can be used for tracing metallic water and heating pipes. Supplied as a kit comprising a transmitter and receiver in a carry case. Voltage measurement range 12 to 400V. Frequency range 0 to 60Hz. Transmitter output signal 125kHz. Transmitter voltage 0 to 400V AC/DC. Depth location 0 to 2.5m. Receiver voltage detection range 0 to 0.4m. The receiver incorporates a torch for working in dimly lit locations.

Cable & Pipe Tracers and Fault Locators cont’d.

Electrical Testers

Megger EZ-Thump 12kV Thumper & TDR Power Cable Fault Locator MEG,EZ-THUMP12 (3610) AU

12kV Hipot tester, TDR and Thumper. This unit is designed as a portable cable fault finder. It operates off either AC supply or internal batteries. The kit includes the Megger pinpointer to locate faults when used in thump mode. Internal battery provide 30mins of thumping with a 3hr recharge time. Generates a 500J 0~12kV @12mA pulse for thumping.

Megger TDR2000/2RM Dual Channel TDR Cable Fault LocatorMEG,TDR2000/2RM (3605) AU

Time Domain Reflectometer cable fault locator. User selectable ranges from 0 to 50m up to 20km, minimum resolution 0.1m. Dual cursor measurement. Internal memory for 15 traces. Megger “Tracemaster” software supplied. RS232 interface for PC communications. High resolution LCD display. Battery powered. Dust and shower proof to IP54.

Riser Bond 1205T-OSP Metallic TDR Cable Fault LocatorRB,1205T-OSP MY

Dual input metallic time domain reflectometer cable fault locator for coaxial cables. Maximum Range: 63,700ft (19,400meters) at .990 VOP. Distance Accuracy: ±0.1ft (0.03m) plus ±.01% of reading. Can store, recall and download waveform, via RS232 cable. (Viewable with Software.)

ABB CB-2000 Portable Capacitance MeterABB,CB2000 (3500) AU

Portable (2.4kg) capacitance meter (0-1000µF) which allows individual capacitors in a capacitor bank to be measured without disconnection. Battery powered with an ac adapter. Approximately 8 hours operating time between charges. Supplied software and drivers allow measured values to be exchanged to and from a PC via supplied USB cable. Data stored as tab delimited text files.

Martindale Phase Sequence & Continuity Indicator 100 to 600V, 50/60HzMAR,PSCI424-585 (3502) AU

Check the presence and sequence of the phases on 3ph circuits. Provides a visual indication of loss of phase or incorrect sequence. Supplied in 2 forms. Probe style; the connection to the tester is via 3 insulated cables to 3 fused test probes, 1 with an insulated crocodile clip. Plug style; a 16A, 4 pin (3ph & earth, BS4343) plug is fitted to the tester. Use as a socket tester prior to plugging in 3ph equipment.

Stay informed on Test and Measurement news, application notes, and case studieswith @TechRentals on Twitter

Megger Cable Indentification KitMEG,CI-KIT (3600) AU

Provides reliable cable identification for both energised and non-energised cables. It can generate pulses on cables 440V 3 phase cables.

25

Electrical Power

Micro-Ohm Meters & Earth Testers cont’d.PAT Testers & RCD Testers

Micro-Ohm Meters & Earth Testers

Megger RCDT330 Residual Current Device TesterMEG,RCDT330 (2618) AU

Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. Auto sequence test feature. 3ph safe. Enables testing on 110V centre tapped supplies. Performs 1/2I, 1xI & 50xI tests on RCDs rated at 10mA, 30mA, 100mA, 300mA, 500mA & 1,000mA on general and selective (time delayed) RCDs. Weatherproof to IP54. USB interface for test results download.

Portable appliance tester. Tests to AS3760. Stores data on USB memory stick. includes a barcode scanner and label printer.

IP54 rated, 2, 3 and 4 point testing. Selectable 25V or 50V output, complete with lead and stake kit. Simple one button operation. Includes 2x50m and 1x30m test cables. Stakeless testing. Has the I & V clamps to enable attached rod testing.

Megger PAT420 Testing and Tagging System

Megger DET4TC Four Pole Soil Resistivity Testing Kit

MEG,PAT420 (2600) AU

MEG,DET4TCR2 (2655) AU

Metrel IT3017- Installation Tester for Testing to AS/NZS3000MET,IT3017INSTALTEST (2610) AU

Multifunction installation tester with measurement functions and Pass/Fail limits set to AS/NZS3000 Wiring Rules. Capable of storing test results for printing compliance test reports. In-built Australian measurements and Pass/Fail limits, and guarantees accountability and traceability with storing of test results. Simply conduct the test, press the Memory button to save the result and assign the result to a location, then download results to PC software and print-out compliance test reports with actual test results. Earth Continuity & Resistance, Insulation Resistance, Polarity, Correct Circuit Connections, Fault Loop Impedance and RCD Testing. “Auto-Sequence Test” mode further speeds up compliance testing and reporting.

Seaward Supernova XE3760+ PAT System with Printer and ScannerSEW,XE3760PKIT+ MY

Includes results label/tag printer and barcode scanner. Performs all AS/NZS3760: 2001/2003 compliant tests, including class 1 & class 2 leakage current 5mA/1mA, an earth conductor bond test up to 25A at 3V (approx. 100W) and 250VDC MOV insulation resistance tests. Stores 5,000 tests in internal memory by appliance ID, including test type, detailed results, test time & date, next test due date, site & location. Calibrated resolution better than the required 5% of FS across all ranges as specified by the Standard. Full QWERTY keyboard, and bar code reader for input. Durable plastic adhesive test label/tags printed to attach to appliances and leads includes user ID (logo optional on request) and test barcode ID, saves transcription. Compatible with Seaward PATGuard plus software package.

Fluke 1625 KIT GEO Earth Ground TesterFLU,1625-KIT (2650) AU

Measure total earthing resistance (RA) with 3 or 4-pole Fall of Potential method, selective earth resistance measurement and 4-pole soil resistivity testing (0.001 ohm to 19.99 k ohm). Stakeless ground loop measurements (0.001 ohm to 199.9 ohm). Includes automatic frequency control to minimise interference effects. Battery powered.

Fluke 1630 Earth Ground ClampFLU,1630-EARTH CLAMP (2651) AU/MY

Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025Ω to 1.5KΩ. Ground leakage current measurement range 0.2mA to 1000mA. Current measurement range 0.2A to 30A. Logs and stores measurements for on screen recall. LCD display. Battery powered.

Fluke Clamp for Ground Loop Resistance around Power PylonsFLU,EI-162BN (2652) AU

Split core transformer designed to work with the Fluke 1623 and Fluke 1625 earth ground testers to make selective earth ground loop resistance measurements on power pylons. Inner diameter of the clamp is 310mm.

Megger High Accuracy Configurable Diagnostic Earth TesterMEG,DET2/2 (2653) AU

Provides a wide resistance range from 0.01Ω to 19.99kΩ for testing larger or more complex grounding systems and for difficult testing environments, with ±0.5% accuracy and 0.001Ω resolution. Microprocessor control and advanced filtering simplify testing in environments with high levels of interference.

Megger DET4TC2 Digital Earth Tester With KitMEG,DET4TC2 MY

Measurement range of 0.010Ω to 200kΩ, ground noise voltage measurement from 1V to 100V and ground current from 1mA to 20A. Accurate results can be obtained in electrically noisy environments since it is capable of rejecting noise voltages of 40V peak to peak and the user can select different test frequencies to minimise the effect of interference. Powered from 8 AA batteries. Supplied with ICLAMP. Auguments the traditional fall-of potential measurement method with ART (Attached Rod Technique) which allows electrode testing without disconnection and also leakage current measurements down to 1mA. The VCLAMP enables true stakeless measurements to be made in situations where driving stakes is not practical.

Megger DLRO10X Digital Low Resistance Ohm Meter 10A/0.1µΩ-2KΩMEG,DLRO10X (2633) AU/MY

Self contained fully automatic (with manual option) micro-ohm meter, selecting the most suitable test current up to 10Adc. Range 0.1µΩ to 2kΩ, resolution 0.1µΩ. Internal memory for 700 tests. Download software supplied. RS232 communications to PC. LCD display. Rechargeable battery.

1800 632 652

WW

W.M

EGGER.COM

The first ever three-phase SVERKER

SVERKER 900Relay and Substation Test System A substation engineer’s ultimate tool box for single and three-phase testing

Rugged and reliable for field use

Intuitive stand-alone operation via instrument touch screen

SVERKER is one of the world’s mostwidely used relay testing units since 1976.Contact us for a demonstration.seinfo@megger.com+46-8-510 195 00The word “Megger” is a registered trademark

Read more about SVERKER 900:

WW

W.M

EGGER.COM

The first ever three-phase SVERKER

SVERKER 900Relay and Substation Test System A substation engineer’s ultimate tool box for single and three-phase testing

Rugged and reliable for field use

Intuitive stand-alone operation via instrument touch screen

SVERKER is one of the world’s mostwidely used relay testing units since 1976.Contact us for a demonstration.seinfo@megger.com+46-8-510 195 00The word “Megger” is a registered trademark

Read more about SVERKER 900:

Megger Pty LimitedUnit 1, 11-21 Underwood Road Homebush NSW 2104

Tel +61 2 9397 5900 Fax +61 2 9397 5911 Email ausales@megger.com Web www.megger.com

Offices Sydney - Melbourne - Brisbane - Perth

27

WW

W.M

EGGER.COM

The first ever three-phase SVERKER

SVERKER 900Relay and Substation Test System A substation engineer’s ultimate tool box for single and three-phase testing

Rugged and reliable for field use

Intuitive stand-alone operation via instrument touch screen

SVERKER is one of the world’s mostwidely used relay testing units since 1976.Contact us for a demonstration.seinfo@megger.com+46-8-510 195 00The word “Megger” is a registered trademark

Read more about SVERKER 900:

Micro-Ohm Meters & Earth Testers cont’d. Power Analysers, Loggers, & Recorders cont’d.

Power Analysers, Loggers & Recorders

Megger DLRO200 200A Micro-Ohm MeterMEG,DLRO200 (2664) AU

Test current range 10A to 200A dc. Measurement range 0.1mΩ to 1Ω, resolution 0.1mΩ. Current cables 2 x 5m. Internal memory for 300tests. Download software supplied. RS232 communications to PC. LCD display.

Megger DLRO600 Digital Micro-Ohm Meter - High currentMEG,DLRO600 (2665) AU/MY

Test current range 10A to 600Adc. Measurement range 0.1µΩ to 1Ω, resolution 0.1µΩ. Current cables 2x5m. Internal memory for 300 tests. Download software supplied. RS232 communications to PC. LCD display.

Megger DLRO Wind Turbine Lightning Protection Test Lead SetMEG,DLRO-100LEAD (2662) AU

For Megger DLRO 10 series digital micro-ohm meters. Specially designed for measuring resistance of lightning protection circuit between wind turbine blade tip and ground. Kelvin clip and hook ends on 100m cable reel. 5m DH2 lead with duplex hand spikes and hook end.

Megger DLRO Lead Set Current & Voltage LeadsMEG,DLRO-LEADSET (2666) AU

For Megger DLRO digital micro-ohm meters. Potential spike lead set x2 and current clip lead set x2. Leads are used to separate the C & P connections. This avoids the erroneously high readings taken due to a high resistance contact. Current clip lead set 2m (242041-7) and potential spike set 2m (242021-7).

Electrical Power

Megger MOM2 Micro-Ohm MeterMEG,MOM2 (2638) AU/MY

Lightweight (1 kg), handheld micro-ohm meter. Up to 220A test current, autoranging from 999 uohm to 1000 mohm FS. Rechargable batteries provide 2200 measurements for Imin = 50A, or 800 for Imin = 100A. Memory for 190 recorded measurements, downloadable via Bluetooth with provided software. Kelvin probes included.

See also Current Clamps, Probes, & Accessories on page 31-32

CHK GridSense PowerMonic PM20 Power Quality AnalyserCHK,PM20 MY

Three phase, weatherproof IP65 field unit. Three voltage channels 63V to 440V (isolated). Four current channels 0 to 3kA RMS (3ph & neutral). Supplied with 3 x 1kA clamp-on CTs (cable capacity 50mm), 3kA for large conductors and 500A for neutrals clamp-on CTs are available. Memory 4Mb. In-built 2 line LCD display. Records V, A, pF, f(Hz), kW, kVA, kVAr, THD, total energy and tariffs, high speed RMS waveform capture events outside preset limits (10ms intervals). Software provides graphs and summaries to PC. Download files while logging. RS232 interface. PC using Win 95, 98 or NT4 O/S, is required with the CHK POWERview software to configure this unit before operating.

CHK GridSense PowerMonic PM30 Plus Power Quality AnalyserCHK,PM30PLUS (8706) AU/MY

Weatherproof IP65 field unit. Channels: 3 Voltage, 63V to 440V (isolated). 3 current 0 to 3,000A (3ph) rms. Supplied with 3 flexible 3,000A clamp-on CTs (flexible CT length 600mm and 190mmØ). In addition, clamp-on CTs of 3,000A, 1,000A for large conductors and 500A and 100A for neutral conductor current measurement are available. Memory: 4Mb. Inbuilt two line LCD display. Records: V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to 48th). Total energy, tariffs, maximum demands, transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Download files while logging RS-232 interface. A PC using Windows 95, 98, NT4, WIN2000 or XP O/S, is required with the CHK POWERview software to configure this unit before operating.

CHK GridSense PowerMonic PM35 Power Quality AnalyserCHK,PM35 MY

Power logger and disturbance analyser. Weatherproof IP65 field unit. 3 Voltage (55VAC to 520VAC) and 4 current (0 to 3,000A) channels. Supplied with 4 flexible 3,000A clamp-on CTs (flexible CT length 600mm and 190mmØ). Memory: 15Mb. Inbuilt two line LCD display. Records: V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to 48th). Flicker (Pst & Plt), Total energy, tariffs, maximum demands, transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Downloads files while logging. High speed USB interface. A PC using Windows 95, 98, NT4, WIN2000 or XP (Vista in compatability mode)O/S, is required with the software to configure this unit before operating.

CHK GridSense PowerMonic PM40 Power Quality AnalyserCHK,PM40PQA (8708) AU

Weatherproof IP65 field unit. Channels: 3 Voltage, 63 to 440V (isolated). 4 current 0 to 3,000A (3ph and neutral) RMS. Supplied with 4 flexible 3,000A clamp-on CTs (flexible CT length 600mm and Diameter 190mm). Memory: 15Mb. Inbuilt Graphic 128x64 bits LCD display, 7 rows x 20 characters. Records: V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, Inter harmonics, voltage and current imbalance (THD and individual to 48th ) and Flicker. Total energy, tariffs, maximum demands, and transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Download files while logging USB interface. A PC using Windows 95, 98, NT4, WIN2000 or XP O/S, is required with the CHK PowerView software to configure this unit before operating.

Fluke 345 Power Quality Clamp MeterFLU,345 (8739) AU

Ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and high EMC immunity design make unit ideal for noisy environments. 600V CAT IV rated, 1400A AC, 2000A DC. Measure and log harmonics, inrush current, ripple current on battery systems. Analyse data and generate reports with included Power Log software.

Learning to operate unfamiliar equipment costs you time and can lead to errors. Save time and reduce your real costs. Read about our Configuration and Download solution on page 23

1800 632 652

The Hidden Cost of Power Anomalies and the Importance of Identifying Harmonics techrentals

www.techrentals.com.au

Electrical breakdowns are a leading cause of equipment failure, often involving large income losses and business interruptions. Many facilities discover this the hard way, left searching for the underlying cause because they were unaware of an impending breakdown or overload. This expensive trend makes Power Quality Analysis (PQA) of electrical systems crucial for maintaining reliable and efficient power.

To most, power quality refers to how often the lights go out due to power interruptions. However, due to major technological advances in consumer electronics, as well as commercial and industrial applications of solid state electronics, our understanding of power quality has been expanded to include:

Harmonic pollution - Distortions cause extra stress on networks, and negatively impact installation efficiencyReactive power – Loads up supply systems unnecessarily, and also negatively impacts installation efficiency Load imbalance – Particularly prevalent in office building applications. Unbalanced loads can lead to excessive voltage imbalances causing stress on other loads connected to the same network. This can cause an increase of neutral current and neutral-to-earth voltage build-upFast voltage transients – Sags and swells, surges, and reductions that lead to flicker

The above lead to system inefficiency and more seriously, can result in transformers overheating, circuit breakers tripping, or electronically controlled variable speed motor controllers dropping off-line. Of particular concern is harmonic distortion.

Typical Problems & Potential Consequences

Harmonic Distortion

Reactive Power

Load Imbalance

Fast Voltage Transients

Was

ted

ener

gy

Redu

ced

Eq

uipm

ent

Life

span

Equi

pmen

t Fa

ilure

s

Unex

pect

ed

Shut

down

s

Unsa

fe

Over

heat

ing/

Stre

ssin

g Sy

stem

Inte

rmitt

ent

Disr

uptio

ns

Degr

aded

Eq

uipm

ent

Oper

atio

n

Fina

ncia

l Cos

t

Much of the equipment we use today (computers, automated process control equipment, variable speed drives, solid state power conversion equipment) contains circuits that convert alternating current (ac) to direct current (dc). When energised, these power conversion circuits (themselves very sensitive to power fluctuations and abnormalities) create harmonics that can severely distort the power supply and cause problems for others connected to the same source.

It once was extremely difficult and very time consuming to identify the presence of harmonics in a power system. Most electrical measuring instruments didn’t have the response time required to detect harmonics. Today, high speed analysers are available to identify and record the various frequencies present in a power system. Software also helps to simplify the process of identifying each discrete frequency. These instruments provide an efficient and user-friendly method of identifying troublesome harmonics. Once identified, a range of solutions can be implemented to reduce or eliminate the effects of unwanted harmonic frequencies:

• For circuits generating harmonics, filtering circuits can be designed and installed• For electrical circuits that must carry additional harmonic current, neutral wires with higher current carrying capacities can be installed to minimise overheating and potential fire hazards• For transformers subjected to harmonic loads, the transformer’s load can be reduced to accommodate the additional harmonic current, a larger transformer can be installed, or a transformer designed to handle harmonic currents can be specified

Most circuits in Australia are designed to operate at a frequency of 50 Hz. The frequency of a harmonic current or voltage is a multiple of the original frequency. For example, in a 50 Hz system, the second harmonic would be 100 Hz; the third harmonic would be 150 Hz and so on. Harmonics add to the fundamental frequency in magnitude and can produce peak voltages greater than the line voltage. These voltages can become a problem when they exceed the design voltage of electrical devices.

Original Waveform

Example 50 Hz

Harmonically Distorted Waveform

Third HarmonicExample 150 Hz

Resulting excessive voltage that causes stress on loads

1800 632 652 rent@techrentals.com.au www.techrentals.com.au

Whenever changes are planned in an electrical power system it’s important to investigate the susceptibility of the power system to harmonic distortion. These investigations should be made in conjunction with any normal power system studies performed when modifications to an electrical system are anticipated.

Problems with power quality are not, and should not remain, mysteries. Although issues are not always easy to identify, and sometimes require intensive investigation, doing so can ensure optimal reliability and efficiency for your electrical supply.

Contact TechRentals today to enquire about our PQA inventory, and discuss how you can best identify harmonics, voltage swings, flicker, power outages and surges in your power system. Also available, our range of power demand analysers suitable for energy auditing. Hioki PW3198 Power Quality Analyser

30

Electrical Power www.techrentals.com.au

Power Analysers, Loggers, & Recorders cont’d. Power Analysers, Loggers, & Recorders cont’d.

Hioki 3196 Power Quality Analyser with 4 x 5,000A Flex CTsHIO,3196-PQA MY

High speed field unit, measuring transient and sub-cycle disturbances, total energy, tariffs and max demand. Voltage (150~600V RMS), and 4 current (0 to 5kA), channels. Includes 4 x flexible CTs, 500/5000A switchable. Records V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, and flicker. Memory 512MB flash card. Colour display. Supplied software provides graphs and summaries to PC. RS232 or LAN interface for PC communications.

Hioki 3196 Power Quality Analyser with 4 x 1,000A CTsHIO,3196PQA-CT1000A (8730) AU

High speed field unit, measuring transient and sub-cycle disturbances, total energy, tariffs and max demand. Four voltage (150~600V RMS), and 4 current (0 to 1kA), channels. Supplied with 4 clamp-on CTs. Memory 512MB flash card. Colour display. Records V, A, pF, f(Hz), kVA, kVAr, kW, harmonics, and flicker. Supplied software provides graphs and summaries to PC. RS232 or LAN interface for PC communications.

Hioki PW3198 Power Quality Analyser including 3 x 1,000A, 1 x 200A AC/DC & 4 x 5,000A Flex CTsHIO,3198 (8732) AU/MY

Premium Power Quality Analyser for demanding applications. Includes 3 x 1,000A AC CTs, 1 x 200A AC/DC CT and 4 x 9667 5,000A flexible CTs. Ideal for AC mains studies as well as solar inverter evaluations. Supplied with Hioki 9624 PQA-HiVIEW Software for detailed data analysis and report generation.

Power logger, supports single to three phase 4 wire circuits. Supplied with 3x500A CTs 5/10/50/100/500A ranges 0.3% rdg+0.01%fs and 3x5000A Flexible CTs 50/500/5000A ranges 2%rdg+0.3%fs. Has a built in battery and can also be powered by the line voltage. Provides harmonic measurement upto the 40th harmonic. Has plug in SD card. Is recongnized and a diskdrive when connected to a computer. Includes analysis software.

Hioki PW3360-21 Clamp On Power Logger with Harmonic Measurement

HIO,PW3360-21 (8735) AUHIO,3360-21 MY

Fluke 435 3-Phase Power Quality & Energy AnalyserFLU,435 (8738) AU/MY

Power Quality Analyser to suit a broad range of AC mains studies. Includes 4 x 600/6000A AC CTs. A unique energy loss calculator provides the ability to monetarily quantify energy losses. Supplied with Fluke Power Log Software for detailed data analysis and report generation. Optional accessory: FLU,I5SPQ3 (3 x i5s 5A AC current clamps).

Fluke 1735 3-Phase Power LoggerFLU,1735 (8737) AU/MY

Measures single-phase to 3-phase 4-wire circuits, 50/60Hz. 3 voltage inputs with common neutral rated 600Vac (CAT III 600V). 4 current inputs, 4 flexible current probes (15A to 3000A) are included. Records voltage, current, power (P, Q & S), power factor, frequency, energy consumption, averaged demand, harmonics (odd up to 25th order), THD (voltage & current). Includes built-in batteries for up to 12 hours of recording, and includes Fluke Power Log software.

Fluke VR1710 Single-Phase Voltage Quality RecorderFLU,VR1710 (8720) AU

Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1s to 20min. Provides continuous recording with no gaps. Includes software for download, analysis and automatic reporting.

Hioki 3169-21 Clamp-On Power Logger with 4 x 500A CTsHIO,3169-21 CT500AMP (8726) AU

Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy-saving. Range 0.05A to 500A. Includes 4 x clamp-on CTs. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications.

Hioki 3169-21 Clamp-On Power HiTester with 4 x 1,000A CTsHIO,3169-21CT1000AMP (8727) AU

Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy-saving. Range 5A to 1000A. Includes 4 x clamp-on CTs. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications.

Hioki 3169-21 Clamp-On Power Logger with 4 x 5,000A FlexCTsHIO,3169-21CLAMPONPT (8728) AU

Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy saving. Range 5A to 5000A. Includes 4 x flexible CTs, 500/5000A switchable. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications.

New items are being added to the inventory constantly, so if you can’t see what you’re looking for, please call us on 1800 632 652.

Electrical Power

QUALITY PRODUCTSQUALITY RESULTS

Load ProfilingEvent MonitoringHarmonics Analysis

Power Parameters Pty Ltd83 Northern Road, Heidelberg West, Vic 3081

www.parameters.com.au power@parameters.com.auFreecall: 1800 623 350 Freefax: 1800 067 263

Chroma62050H-600S

PonovoL336i Protective Relay Tester

BaurPD SGS Handheld PD Detector

Hioki PW3198 Power Quality Analyser

Cat IV 600V

Class A

Test OnlineTEU & Acoustic Sensors

MV & HV Switchgear

4 x 300V, 3 x 20A61850 OptionComprehensive Software

Analyse MPPT Tracking1000V, 15 kW

Fast Transient Response

Current Clamps, Probes, & Accessories Current Clamps, Probes, & Accessories cont’d.

See also Electrical Testers on page 24See also Power Analysers & Recorders on page 27

CHK CR100 Clamp-on CTCHK,CR100 MY

Jaws 43mmØ inside. Use with CHK,PM20 or PM30 for use as fourth CT to measure neutral current. Accuracy Class 1.

Dranetz TR2510 Current Clamp Probe 0 to 10A RMSDRA-BMI,TR2510 (8766) AU

Set of 4 current clamp/probes, range 0 to 10A RMS. Max conductor size 12mmØ. Suitable for power quality analysers DRA-BMI,PG4400, DRA-BMI,PX5 and DRA-BMI,PX5-400. For current measurement through CT current transformer. CT ratio can be selected on the above mentioned models.

1,000A AC and DC current measurement with fixed jaw. 2500A AC current measurement with the 45cm iFlex flexible current probe. 1000V AC and DC voltage measurement. Voltage and current measurements are true rms. Includes ability to measure frequency, resistance and capacitance. Rated CAT IV 600V and CAT III 1000V.

Fluke 376 True-rms AC/DC Clamp Meter with iFlexFLU,376 (8770) AU/MY

Compatible with any Fluke scopemeter test tool, power harmonics analyser, oscilloscope, multimeter or other voltage measurement device that has the following feactures: BNC input connectors or if using a meter a BNC to banana plug adaptor PM9081/001 (included) lets you use this probe with your DMM.

A pack of 3 pieces of the i5s 5A AC current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. CAT III 600 V (For insulated conductors only). Suits the Fluke 435 and other instruments with BNC inputs.

Fluke 90I-610S 1A to 600A AC/DC Current Probe

Fluke i5sPQ3 AC Current Clamps, 5A (3 x i5S per set)

FLU,90I-610S MY

FLU,I5SPQ3 (8790) AU/MY

Ranges 200A/2kA AC/DC. Measure volts, ranges 30V, 300V & 600V AC/DC. Frequency ranges 10Hz, 100Hz & 1kHz. Display LCD, counts max 2,500 current, 3,750 voltage and 1,250 frequency. Output voltage 1V for 2,000 count fs for each current range, can select Rec RMS output, response time about 250ms rise time, fall about 500ms. Waveform output. 1V is produced for 1,000 count on full scale frequency range. Output not available for voltage measurements. Supplied with signal output cord, 4mm to BNC convertor, carry case and AC adaptor. Powered with internal 9V battery or AC adaptor. (AC adaptor not supplied).

Hioki 3285 AC/DC Clamp-on Meter with Analog OutputHIO,3285 (8781) AU

1800 632 652

32

Electrical Power www.techrentals.com.au

Multi-function Partial Discharge (PD) Instrument. It measures accurate PD activity using the UltraTEV detector and an ultrasonic detector. It gives you an objective measure of the level of activity. Will display PD severity level. The kit includes the Ultradish for measurement of overhead assets.

EA Technologies UltraTev Plus Partial Discharge Detector EAT,ULTRATEVPLUS (8410) AU

Insulation: measurement range: 0.01M to 2GΩ. Test Voltages: 50V, 100V, 250V, 500V, 1,000V Multimeter: Voltage 1mV to 1,000VAC/DC, current 0.01mA to 400mA AC/DC, resistance 0.1Ω to 50.0MΩ, capacitance 1nF to 9999μF, frequency 0.01Hz to 99.99kHz.

Fluke 1587 Insulation MultimeterFLU,1587 MY

Tester verifies the safety of electrical installations, according to IEC 60364, HD 384 standards. Functions available: voltage and frequency measurement, insulation resistance testing, continuity testing, loop impedance, RCD tripping time, RCD tripping current, earth resistance and phase sequence.

Fluke 1653 Electrical Installation TesterFLU,1653 MY

PI (Polarisation Index) and DAR (Dielectric Absorption Ratio) function to check insulation quality and step voltage test to detect for signs of deterioration. Generates test voltages from 250V to 5kV in commonly used presets of 250V, 500V, 1kV, 2.5kV & 5kV, or set to desired level by increments or decrements of 25V or 100V. Insulation diagnoses for automatic calculation and indication of PI and DAR, step voltage testing and temperature correction. Large memory stores up to 100 manual records and a logging function for 10 data (360 times). Stored data with date and time may be displayed on the LCD or down-loaded.

Hioki 3455 High Voltage Insulation TesterHIO,3455HVIT-5kV MY

Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail judgement. Automatic discharge of device under test in DC test mode. Equipped with Key Lock and Interlock functions for greater safety.

Kikusui TOS-5101 10kV AC/DC Hipot TesterKIK,TOS-5101 (8430) AU

Measures to 20TΩ at 5kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible while battery is charging. Advanced memory with date/time stamp. Noise filter rejects up to 3mA noise. PowerDB Lite asset management software supplied with unit for download of test data to a PC.

Megger MIT525 5KV DC Insulation Resistance TesterMEG,MIT525 (8426) AU/MY

Backlit display, variable test voltage from 50V to 10,000V, Automatic IR, PI, DAR, SV and DD tests, measures to 35T, RS232 and USB download of results. IEEE 43-2000 recommends the use of 10kV for motor windings rated above 12kV. Protection rating of IP54. Mains or battery powered.

Megger MIT1020 Diagnostic 10kV Insulation Resistance Tester

MEG,MIT1020-10KV DIT (8423) AU

Current Clamps, Probes, & Accessories cont’d.

Insulation Testers & Meggers to 20kV

Insulation Testers & Meggers to 20kV cont’d.

Current Measurement at DC and from 1Hz AC to 1,000Hz. Current Clamp Hioki 9693 Clamp-on AC/DC sensor ranges: 20A, 200A & 2,000A, jaw opening 55mm.

Rated primary current 100A AC. Amplitude ac-curacy: ±0.5% rdg. ±0.2%FS (at 45 to 66Hz). 66Hz-5kHz ±1% or less. Max circuit voltage 300V RMS/insulated wire. Core jaw: 15mmØ. Size: 46w x 21d x 135hmm, cord length 3m.

Hioki 3290 Clamp-On AC/DC HiTester

Hioki 9660 Clamp-on 100A AC CT

HIO,3290 MY

HIO,9660CT100A (8783) AU

500A rated, 500mVAC FS output, core jaw 46mmØ. Designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meets all CE marking requirements. Basic specifications: Rated input current 500A AC, rated output current 0.5VAC, accuracy (at 45 to 66Hz), amplitude: ±0.5% rdg ±0.2% FS is the 3196 range value, phase: ±0.5° or less, frequency characteristics 66Hz to 5kHz (±1% or less from accuracy), max allowable input continuous 550A RMS (45 to 66Hz), max circuit voltage 600VAC RMS (insulated wire), core jaw Ø46mm, dimensions, mass 77mm W x 151mm H x 42mm D, 360g, cord length 3m.

Hioki 9661 CCT-500A Clamp-On Sensors 500A, 500mVAC OutputHIO,9661 CCT-500A (8784) AU

500A rated, 500mVAC FS output, jaw 46mmØ. Rated input current 500A AC, rated output 0.5VAC, accuracy (at 45 to 66Hz). Amplitude ±0.5%rdg, ±0.2%FS. FS is the 3196 range value, phase ±0.5° or less, frequency characteristics 66Hz to 5 kHz (±1%), max. Allowable input continuous 550A RMS (45 to 66Hz), max circuit voltage 600VAC RMS (insulated wire). Dimensions 77mm W x 151mm H x 42mm D, cord 3m. Suitable for Hioki models: 3196PQA, 3197PQA, 3169-20CLAMPONPT, 2331-20RPMS, 8715-01, any data logger/scope which takes up to 1.7mVAC input.

Hioki 9661-01 CCT-500A Clamp-on SensorsHIO,9661-01 CCT-500A (8785) AU

Rated primary current 5A AC. Amplitude accuracy ±0.5% rdg. ±0.2% FS (at 45 to 66Hz), 66Hz to 5kHz ±1% or less. Max circuit voltage 300V RMS/insulated wire. Core jaw 15mmØ. Size mm: 46w × 21d × 135h, cord length 3m.

Hioki 9694 Clamp-on CT 5A (Set of 4)HIO,9694CT5A (8789) AU

33

Electrical Power

Insulation Testers & Meggers to 20kV cont’d. Oil, Hipot, & VLF Testers above 20kV cont’d.

Oil, Hipot, & VLF Testers above 20kV

10kV DC Insulation Resistance Tester. Measures to 20 TΩ at 10kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible while battery is charging. Advanced memory with date/time stamp. Noise filter rejects up to 3mA noise. PowerDB Lite asset management software supplied with unit for download of test data to a PC.

Measures to 30TΩ at 15kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible while battery is charging. Advanced memory with date/time stamp. Noise filter rejects up to 6mA noise. PowerDB Lite asset management software supplied with unit for download of test data to a PC.

High output current 5mA for fast charging of capacitive loads. Testing up to 10kV, mains or battery powered, digital/analogue backlit display, variable test voltage from 50V to 10,000V, automatic IR, PI, DAR, SV and DD tests. Measures to 35TΩ. RS232 and USB download of results.

High output current 5mA for fast charging of capacitive loads. Testing up to 5kV, mains or battery powered, digital/analogue backlit display, variable test voltage from 50 to 5,000V, automatic IR, PI, DAR, SV and DD tests. Measures to 15TΩ. RS232 and USB download of results.

Megger MIT1025 10kV DC Insulation Resistance Tester

Megger MIT1525 15 kV DC Insulation Resistance Tester

Megger S1-1052 High Current Insulation Resistance Tester 10kV

Megger S1-552 High Current Insulation Resistance Tester 5kV

MEG,MIT1025 (8427) AU

MEG,MIT1525 (8428) AU

MEG,S1-1052 10KV-DIT (8424) AU/MY

MEG,S1-552 5KVDIT (8425) AU

Compact, portable unit (41kg) for DC field testing of cables, terminations, motors, generators and other electrical apparatus. 80kV 10mA output capability with multirange voltmeter and ammeter. For operator safety the power supply and test object are automatically grounded when high voltage is turned off, and there is no exposed high voltage. Guard circuit for accurate leakage current measurement. Includes overload relay and surge limiting resistors in HV output.

Hipotronics 880PL-10MA-B 80kV DC Hipot TesterHIP,880PL (8491) AU

Single, portable (34kg) unit suited for testing overhead apparatus, vacuum bottles and interrupters, switch gear, bus duct, motorized vacuum switches, reclosers, bushings, fuses and arrestors, linemans safety products, small transformers, electrical components and motors. This 3kVA model features capacitive load compensation enabling full load testing with a power draw of 1.5kVA while operating from a conventional line input. 60mA output current capability.

High Voltage Inc PFT503, 50kV AC Test SetHIV,PFT503 (8453) AU

Portable (16kg control unit, 39kg HV tank) hipot tester, 100kV, 50Hz, rated 3kVA into capacitive loads. Features continuously adjustable output voltage, external safety interlock, zero start safety interlock, self resetting over current protection, guard/ground return mode, HV on/off and main power push button ruggedized meters and with glass windows that eliminate static buildup.

High Voltage Inc PFT-1003CMF 100kV AC Hipot Test SetHIV,PFT1003 (8456) AU

Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cables, transformers, capacitors, rotating machines and other switchgear. This test allows the detection of insulation defects before they fail in service.

HV Diagnostics HVA TD60 Portable TanDelta Measurement SystemHVD,HVA TD60 (8460) AU

VLF and DC test capabilities combined in one unit (20kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear, transformers, machines (IEEE 433), insulators and bushings. VLF (0.1Hz to 0.02Hz), DC (±), cable fault conditioning (burning) and sheath/jacket testing modes all included. Fully automatic or manual cable test sequences complying with International Standards/Guides such as IEEE 400.2, VDE 0276 and CENELEC. True symmetrical sinusoidal, load independent, output waveform across the full load range. Real-time display of actual output wave form. Easy to use, ergonomic, menu guided, large backlit user interface. Large output load capability (up to 5uF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop.

HV Diagnostics HVA30 30kV-15mA DC/VLF High Voltage Insulation Dielectrics Test Set HVD,HVA30-DC/VLF (8461) AU/MY

Portable HiPot 0~30kVac 1kVA resistive/capacitive load: 33mA. Duty cycle at 1kVA 1h on 1h off 700VA continuous. Tests the integrity of items including insulating materials, isophase bus duct, switchgear, transformers, vacuum bottles & interrupters, vacuum switches, automatic circuit reclosers, bushings, fuses, arrestors, circuit breakers, transformers, capacitors, motor and generator windings.

High Voltage Inc PFT301 30kV AC HiPot TesterHIV,PFT301CM (8452) AU

Watch how-to videos on any piece of equipment displaying this symbol.Visit www.techrentals.com.au and select Technical Tips and Videos.

1800 632 652

34

Electrical Power www.techrentals.com.au

Transformer Testers

Megger CAL 300 IDAX Calibration BoxMEG,CAL300 (8551) AU

Exclusively used for calibration of Megger IDAX Insulation Diagnostic Analysers.

Megger IDAX 300 Insulation Diagnostic AnalyserMEG,IDAX300 (8552) AU

Provides an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. It utilises Dielectric Frequency Response in combination with analysis in software to determine the percent of moisture in paper insulation, oil conductivity and an individually corrected tan delta value at 20°C reference temperature.

Megger MTO330 Automated Six Winding Transformer OhmmeterMEG,MTO330 (8553) AU

Delivers full eight-terminal/six-winding resistance measurement capability. Designed to save time by testing all six windings without having to disconnect and reconnect leads. Also, the simultaneous winding magnetization method gives fast and reliable measurements even on large transformers with delta configuration on the low voltage side. The MTO330 leads are interchangeable with the Megger TTR320 three-phase turns ratio instrument which eliminates additional connecting time for turns ratio measurements (However, TTR320 leads must NOT be used with the MTO330. The MTO330 leads have a higher current rating). Includes an on-board computer with QWERTY keyboard, USB and ethernet.

Megger TTR320 3-Phase Transformer Turns Ratio Test SetMEG,TTR320-47 (8554) AU

Accurately measures ratio, phase deviation and exciting current on 3-phase transformers in the presence of high noise. Can test phase-PowerDB. Test results can be stored and downloaded at a later time. Handles ratios up to 45,000:1 with 0.3% accuracy, 0.1% up to 2,000:1. Compatible with the Megger MTO330 transformer ohmmeter leads which eliminates additional connecting time for turns ratio measurements (However, TTR320 leads must NOT be used with the MTO330. The MTO330 leads have a higher current rating). Includes an on-board computer with QWERTY keyboard, RS232 and ethernet.

Omicron CT Analyser Current Transformer Analyser

Omicron FRA Frequency Response Analyser

OMI,CTANALYZER (8555) AU

OMI,FRA (8556) AU

Portable (8 kg) and automated unit for testing protection and metering CTs on-site. CTs can be verified up to the 0.1 accuracy class. The included CT SB2 switchbox allows automated testing of CTs with up to six taps. Remanence can be measured and cores can be demagnetised.

Uses swept frequency response analysis to detect mechanical and electrical changes of the core and winding assembly of power transformers. By finding winding or core defects after faults, mechanical shocks or transportation, it offers a valuable opportunity to improve the reliability of transformers, to reduce maintenance costs and to avoid expensive, unexpected outages. Laptop included, preloaded with the FRAnalyzer software.

Oil, Hipot, & VLF Testers above 20kV cont’d. Transformer Testers cont’d.

VLF and DC test capabilities combined in one unit (60kg). Suitable for testing cables, capacitors, switchgear, transformers, machines, insulators and bushings. VLF (0.1Hz to 0.02Hz), DC (±), cable fault conditioning (burning) and sheath/jacket testing modes all included. Fully automatic or manual cable test sequences. True symmetrical sinusoidal, load independent, output waveform across the full load range. Real-time display of actual output wave form. Large output load capability (up to 5µF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop. For a more comprehensive understanding of insulation condition perform tan delta testing at the same time with optional accessory HVD,HVA TD60.

HV Diagnostics HVA60 60kV VLF/DC Test SetHVD,HVA60-DC/VLF (8462) AU

VLF and DC test capabilities combined in one unit (127 kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear, transformers, machines (IEEE 433), insulators and bushings. VLF (0.1Hz to 0.01Hz), DC (±), cable fault conditioning (burning) and sheath/jacket testing modes all included. Fully automatic or manual cable test sequences complying with International Standards/Guides such as IEEE 400.2, VDE 0276, CENELEC HD620 S1, NEN 3620, SANS 10198 and IEC 60060-3. True symmetrical sinusoidal, load independent, output waveform across the full load range. Real-time display of actual output wave form. Easy to use, ergonomic, menu guided, large backlit user interface. Large output load capability (up to 10uF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop. Optional Accessories: HVD,HVA TD60.

HV Diagnostics HVA90 90kV VLF/DC Test SetHVD,HVA90_DC-VLF (8463) AU

Test voltage 80kV max at 61.8Hz. Fully automatic operation. Rechargeable batteries. RS232C interface.

Megger OTS80PB Transformer Oil TesterMEG,OTS80PB (8450) AU/MY

Tests elevating boom as well as the work platform and linings to ANSI A92.2 draft standard. Can also be used in many other Hipot applications that require the sort of voltage and current this instrument is capable of. Can supply 0 to 130kVAC @ 50mA and 0 to 35kVAC at 171mA. The whole system is built into a trolley cart for ease of use. Measurement accuracy 1% FS for 10 to 100% of range.

Phenix BK130 130kVAC Hipot Aerial Lift Test SetPHE,BK130 (8480) AU

35

Electrical Power

Transformer Testers cont’d.

Circuit Breaker Testers

Current Injectors

Current Injectors cont’d.

Omicron Dirana Transformer Insulation Moisture AnalyserOMI,DIRANA (8557) AU

Provides an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. It utilises Dielectric Frequency Response in combination with analysis in software to determine the percent of moisture in paper insulation, oil conductivity and an individually corrected tan delta value at 20°C reference temperature. The unit is provided with a laptop pre-loaded with all software.

Accurately tests all types of instrument transformers using low-frequency and variable-frequency methods. Short testing times combined with Windows PC ensure that analysis and reporting for multiple transformers is a simple and efficient task for HV engineers. Other features include: test M/P/TP types, as well as bushings and GIS styles; ratio check 30,000:1 to 45,000:5 (±0.1%); knee point check up to 30 kV; test in accordance with IEC60044-1/6 and ANS/IEEE C57.13. This instrument also supports IEC61850 protocols.

116 timing channels (6 main contacts, 6 Resistive contacts, 4 aux contacts) , up to 3 trip/ 1 close coils, motion and speed analyser (single analogue transducer input), suitable for EHV, HV and MV circuit breakers, standalone no PC required for operation, Analysis and results directly on display. Accuracy 100µs c0.025%.

Ponovo CT/PT Analyser

ISA CBA1000 Circuit Breaker Analyser

PON,PCT200I (8559) AU

ISA,CBA1000 (4657) AU

Megger TM1760 Circuit Breaker Analyser SystemMEG,TM1760 (4670) AU

Advanced Circuit Breaker Analyzer with built-in PC and utilising DualGround method for safer testing. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections. Includes 3 static & dynamic resistance modules with up to 220A test current, a 3-channel dynamic capacitance module and a full set of required cables.

Megger CSU600AT Current Supply Unit with Timer Option

Megger INGVAR Primary Current Injection Test System

MEG,CSU600AT (4602) AU/MY

MEG,INGVAR MY

600A current supply unit, including timer option. Current supply, 100A @ 9.0V 1hr, 600A @ 6.5V 30s.

Advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more. Up to 5,000A output current. Two units, each of about 20kg, making it easier to carry. (Supplied current cable supports up to 2,000A only).

Multi-Amp MS-2 High Current Test SetMUL,MS-2 (4600) AU

Designed to test overload relays, circuit breakers and earth fault trip devices. Input 240V 50/60Hz. Output continuously adjustable in 4 ranges 120V/5A, 24V/25A, 6V/120A & 3V/240A. Short term over current of several times the rated current ranges is possible. Digital current meter has read and hold facilities for short duration currents. Digital timer measures elapsed time between energisation and the test device operating.

Omicron CPC 100 Multi-functional Primary Test SystemOMI,CPC100PTS (4620) AU

Portable (29 kg) primary test system suited for testing of current transformers, voltage transformers, power transformers, power lines, HV cables, grounding systems, switchgear and circuit breakers, protection relays and more. Tests to 800A (extended to 2000A with CP CB2) over frequency range 15Hz to 400Hz, or to 400A DC. Laptop included, preloaded with CPC 100 Toolset. Optional accessories: OMI,CPCU1 (with or without OMI,CPSTEP) OMI,CPSB1 OMI,CP-TD1 OMI,CPCB2.

Omicron CP CB2 Current BoosterOMI,CPCB2 (4605) AU

Combined with the CPC 100, the CP CB2 boosts the output current of a CPC 100 from 800A to 2000A.

Omicron CP CU1 Multi-Purpose Coupling Unit for PC 100OMI,CPCU1 (4623) AU

Combined with the CPC 100, the CP CU1 is a measurement system for line impedances & k-factors of overhead lines or power cables, mutual coupling of parallel lines, ground impedances of large substations and coupling of power lines into signal cables. This test system overcomes the problem of power system frequency interference that has previously made it necessary to use extremely large, high-power equipment to carry out these measurements.

OMICRON Step & Touch Voltage Accessory SetOMI,CPSTEP (4624) AU

Combined with the CPC 100 and CP CU1, this kit is a measurement system for Step & Touch voltages. The battery powered FFT Voltmeter (CP AL1) operates with short leads and requires no connections back to the CPC 100.

Omicron CPSB1 Switch BoxOMI,CPSB1 (4621) AU

Switch Box to allow fully automated 3 phase transformer testing, accessory for the CPC100.

Omicron CP TD1 Capacitance and Tan Delta Add-onOMI,CP-TD1 (4622) AU

Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allows the insulation condition of transformers, generators and other parts of high-voltage systems to be tested according to IEEE 62 (C57.152), IEC 60076-1 and -3, as well as the CIGRE “Guide for Transformer Maintenance”. As recommended in the CIGRE Guide, testing is performed at variable frequencies to better diagnose signs of ageing in insulation. The portable test system (max. 29 kg per component) can also generate output voltages of up to 12kV. Trolley included.

1800 632 652

36

Electrical Power www.techrentals.com.au

Current Injectors cont’d. Protection Relay Testing Systems cont’d.

Protection Relay Testing Systems

T&R CIT/LU2000 Primary Current Injection Test SetT&R,CIT (4603) AU

Comprises control unit and 2kA loading unit (LU). Control unit includes timer, current and voltage meters, and variable output transformer. External loading unit output 0 to 2kA, duty 5min on 15min off at 6VAC, continuous 0 to 1kA at 3VAC. Two units weight 35 & 45kg plus 2 quad 70mm2 cable sets each 3m long. Control unit connects to LU with supplied interface cable.

Omicron CMC256-6 Universal Relay Test SetOMI,CMC256-6 MY

Protection relay test set and universal calibrator (energy meters, measuring transducers, power quality measurement devices, phasor measurement units etc) with six current sources (6 x 12.5A, 3 x 25A or 1 x 75A), four voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The six current and four voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. LLO-2 option not included. Laptop included, preloaded with Test Universe software (Universal). Optional accessories: OMI,CMA156-6PCA OMI,CMGPS.

Omicron CMC 256plus Universal Relay Test Set OMI,CMC256PLUS (4661) AU

Improved accuracy specifications. Protection relay test set and universal calibrator (energy meters of class 0.2, measuring transducers, power quality measurement devices, phasor measurement units) with 6 current sources (6 x 12.5A, 3 x 25A or 1 x 75A), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. LLO-2 option not included. Laptop included, preloaded with Test Universe software (Universal). Optional accessories: OMI,CMA156-6PCA

Omicron CMC 356 Advanced Protection Relay Test SetOMI,CMC356 (4656) AU

Protection relay test set with 6 current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. Laptop included, preloaded with Test Universe software (Advanced Protection + Transducer). Optional accessories: OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS

Omicron CMC 356 Advanced Protection Relay Test Set +61850OMI,CMC356_61850 (4657) AU

Protection relay test set with 6 current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. Includes IEC61850 software package (GOOSE, Sampled Values, IEDScout, SVScout). ELT-1 and LLO-2 options not included. Laptop included, preloaded with Test Universe software (Advanced Protection + Transducer) and IEC61850 package. Optional accessories: OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS

Omicron CMGPS Syncronisation Control UnitOMI,CMGPS (4662) AU

Optional accessory for use with any OMICRON CMC test set. Included are two GPS unit which provide a start signal pulse based on the GPS clock time base. Software is integrated in the testing modules (State Sequencer). Can also be used as a stand-alone application.

Light weight secondary relay tester. 6x15A ±1mA AC current sources, 4x150V AC ±2mV voltage sources, 8 binary inputs & 4 binary outputs. PC software with a library of testes for nearly every relay available on the market.

Relay test set for 1ph protective relay equipment. Three phase relays can be tested 1ph at a time or by synchronising more than one unit. Can test voltage relays with a frequency range from 15Hz up to 550Hz. Current ranges to 100A with full load current to 250A. Volage source up to 250VAC and 300VDC. Inbuilt capacitor and resistors for current output phase shifting (360°). Inbuilt timer, ammeter, and voltmeter. Measures phase angle, PF, and impedance.

Relay test set for 3ph protective relay equipment. Current ranges to 105A. AC outputs to 900V and DC outputs to 900V. Power factor and phase shifting measurements. 4x Voltage, 4x Current generators with 4 binary inputs, 2 binary outputs, and timing measurement. Built in computer controller for setting up and sequencing tests.

Ponovo Secondary Relay Tester

Megger (Programma) Sverker780 Relay Test Set

Megger Sverker 900E Relay Testing System

PON,L336I (4650) AU

MEG,SVERKER780 MY

MEG,SVERKER900E (4674) AU

Megger (Programma) Sverker760 Relay Test Set PRO,SVERKER760 (4672) AU

Relay test set for 1ph protective relay equipment. Three phase relays can be tested 1 phase at a time or by synchronising more than one unit. Current ranges to 100A with full load current to 250A. AC outputs to 250V & DC outputs to 300V. In-built capacitor and resistors for current output phase shifting. In-built timer, ammeter, and voltmeter. Measures phase angle, PF, and impedance. RS232 communications and control interface.

T&R DVS3-HP Static Relay Test SystemT&R,DVS3-HP (4675) AU

Test system for testing voltage and frequency protection relays and transducers. Tests Automatic Voltage Regulating (AVR) relays with line drop compensation, under and over voltage relays, directional over-current relays, df/dt (ROCOF) relays, vector surge (step change of phase) relays and check synchronising relay. Generates a 3ph voltage output from a 1ph supply, and may be used in conjunction with a current source to test directional protection. Requires 1ph 50/60Hz supply of 115V or 230V (±15%). We only supply the DVS-T260 VT box (Ratio 1:2) which has a maximum output voltage of 266V for a maximum load of 10VA per phase. Accuracy, Class 2 (±0.2% for 2.5 to 10VA load).

37

Electrical Power

Power Transformers & Variacs

Battery Management Systems

Takes on-the-spot measurements of the internal resistance, voltage and temperature of lead-acid batteries, principally for UPS and similar applications, without needing to shut off the battery. Instantaneous results, on a three-rank scale of Pass, Warning, or Fail, using a composite decision based on the internal resistance and the voltage. Resolution of 1µΩ, necessary for high capacity batteries (of at least 500Ah). Includes Hioki 9460 clip type temperature leads.

Portable (22kg, 38kg with accessories and transport case) battery discharge load unit. Works with 12V to 480V battery systems and can discharge at up to 110A (15kW maximum power). Can be programmed for constant current, constant power, constant resistance or user defined load profiles. The included DC current clamp allows on-load testing. Tests can be PC controlled and results reviewed using the included TORKEL Win software. The load current can be extended with the optional accessory PRO,TXL870.

Hioki 3554 Battery HiTester

Megger (Programma) TORKEL 860 Battery Load Unit

HIO,3554 (8270) AU/MY

PRO,TORKEL-860 (8278) AU

Dimmer Dot 0-270V AC, 17A VariacDIM,D201P (8230) AU

Single phase variac. 240 V AC input, 0-270V AC output at 17A. Input and output connections must be wired up under a protective cover.

Dimmer Dot Variable AC Voltage Auto Transformer 3 Phase 23-28AVAR,D-283-OB (8229) AU

Manual operated air cooled; Input 400/415V, 50Hz. Output 0 to 415/470V. 23 to 28A. Total Weight 95kgs.

Megger (Programma) TORKEL 840 Battery Load UnitPRO,TORKEL-840 (8276) AU

Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12V to 250V battery systems and can discharge at up to 110A (15kW maximum power). Can be programmed for constant current, constant power, constant resistance or user defined load profiles. The included DC current clamp allows on-load testing. Tests can be PC controlled and results reviewed using the included TORKEL Win software. The load current can be extended with the optional accessory PRO,TXL870 extra load unit.

Megger (Programma) TXL870 Extra Load UnitPRO,TXL870 (8277) AU

Optional accessory for the PRO,TORKEL-840 battery load unit. Adds up to an extra 112A load capacity to a discharge test (15.8kW maximum). Operates as a slave in combination with a PRO,TORKEL-840 battery load unit.

Follow us!

Visit our Youtube Channel

Have greater access to news, product tips, and information via a range of social media channels. With over 100 videos on our YouTube channel and

regular industry related updates on Twitter, LinkedIn, and Google+ you will always be informed.

So subscribe and follow to stay up-to-date and in-touch with our friendly team and make the most

of your test and measurement equipment.

Watch our Electrical Power playlist

Watch our General Industrial playlist

Watch our Construction playlist

www.youtube.com/techrentals

www.twitter.com/techrentals

www.google.com/+techrentals

www.linkedin.com/company/techrentals

1800 632 652

38

General Industrial

Temperature Meters/IR ThermometersInfrared Thermal Imaging CamerasEndoscopes Borescopes Visual InspectionHigh Speed Video Inspection CamerasTachometers/StroboscopesLaser Rotational Shaft AlignmentIndustrial Process CalibratorsWet & Dry Block & CalibratorsStrip Chart RecordersHigh Speed Waveform RecordersData LoggersPressure Vacuum Gauges/RecordersFlow Meters for Liquids & GasesCombustion, Flue & Industrial Gas Analysers

www.techrentals.com.au

Temperature Meters/IR Thermometers

Fluke 52-2 Digital Thermometer

Fluke 54-2B 2 Channel Data Logging Temperature Meter with FlukeView

FLU,52-2 MY

FLU,54-2B-FVF (4507) AU/MY

Dual input thermocouple thermometer supplied with two K type thermocouples for differential measurements. Sampling rate of 1Hz (1 probe) or 1.7Hz (2 probes). Will continuously record max and min measurements. It also can take K,J,T and E type Thermocouple inputs. Temperature range: K type: -200°C to 1,372°C.

Dual input digital thermometer with data logging. Will take most TC inputs. Accuracy ±0.05% of reading +0.3ºC. 500 point logging with date & time stamp. Also records min, max or avg. Logged data can be reviewed on meter or downloaded to PC using software included. Supplied with 2 x 1m K type thermocouple leads -200 to 800°C.

FLIR Systems Pty Ltd.VIC: 03 9550 2800 NSW: 02 8853 7870 WA: 08 6263 4438 Tel AU: 1300 729 987 NZ: 0800 785 492 Email: info@flir.com.au

MORE DETAIL & MORE CHOICES for Faster Troubleshooting and ReportingExperience the Power of FLIR Thermal ImagingFrom the pocket portable C2 to the well-connected E60 and the incredibly ergonomic T-Series, all FLIR handheld infrared cameras come standard with our patented MSX® technology. MSX adds key visible details to your images without diluting their thermal integrity so you see numbers, labels, and perspective that help instantly identify where potential problems are heating up.

FLIR E-Series and T-Series cameras also feature the speed of built-in wireless communication. Transmit readings from compatible FLIR METERLiNK® test instruments and embed extra measurement data into thermal images automatically. Connect cameras via Wi-Fi to smartphones and tablets with FLIR Tools Mobile for fast image sharing and decision making.

Perfect for electrical/mechanical inspections, HVAC applications, building diagnostics, and more, FLIR cameras set the benchmark in affordable, feature-rich thermal imaging.

www.flir.com.au/techrental

ISO No. FLIR20850 Disclaimer: Images for illustrative purposes only. Specifications subject to change without notice.

FLIR MSX® Embosses Thermal images with Visible Detail

*See warranty and registration details at flir.com

Tech_RentalAD_FINAL_092815.indd 1 9/28/15 3:09 PM

Fluke 572-2 High Temperature Infrared ThermometerFLU,572-2 MY

Temperature measurement range from -30 to 900ºC with USB interface. 60:1 distance to spot ratio with dual laser sighting for fast, accurate targeting. Adjustable emissivity and predefined emissivity table. Accuracy of ±1ºC for reading from 0 to 950ºC, display resolution 0.1ºC. Stores 99 data points, data output via USB cable, comes with software for viewing and reporting.

39

General Industrial

Infrared Thermal Imaging Cameras cont’d.Temperature Meters/IR Thermometers cont’d.

Infrared Thermal Imaging Cameras

Flir E8 Infrared Thermal Image CameraFLI,E8 (4547) AU

-20 to 250˚C, IR and MSX resolution 320 x 240, 9Hz, NETD <60 mK. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. PC report writing software provided.

Fluke 1523 NATA Precision Handheld ThermometerFLU,1523-NATA (4514) AU

Precision, portable, electronic thermometer with trending and 25 memory positions for NATA-traceable calibration and high accuracy. Includes 5616 probe 298mm x 6.35mm 100Ω platinum resistance thermometer probe (PRT) -200 to 420°C, stability ±10mK, accuracy ±0.012°C at -200°C, ±0.011°C at 0°C, ±0.028°C at 420°C.

Testo 845 IR Thermometer with Humidity Probe and T/C ProbeTES,845 (4527) MY

Temperature measurement -35 to 950°C. Relative humidity probe 0 to 100%RH. Fast-action surface probe with sprung thermocouple strip, also for uneven surfaces. Switchable optical resolution: far field: 75:1 (16mm at a distance of 1200mm). Close focus: 1mm at a distance of 70mm. Adjustable emissivity from 0.1 to 1, max, min, displayed on backlit LCD. Continuous measure mode. Data output software and cable included. Accuracy ±0.75% of reading 100 to 950°C. Display resolution 0.1°C.

Flir E60 MK-II Infrared Thermal Image CameraFLI,E60-II (4549) AU/MY

-20 to 650˚C, IR and MSX resolution 320 x 240, 60Hz. NETD 50 mK. 2 and 4x digital zoom. Visual image 3.1mpix, built in LED lamps, laser locator, scalable IR picture in picture. Video recording, touch screen, composite video out, Wi-Fi, and USB. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. Bluetooth support for voice annotations and selected Extech equipment. PC software provided. Mobile app available.

Flir E60 Infrared Thermal Image CameraFLI,E60 (4550) MY

-20°C to 650˚C, IR resolution 320 x 240, 60Hz, visual image 3mpix, built in LED lamps, laser locator, scalable picture in picture. Video recording, touch screen, composite video out, Wi-Fi, and USB. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. Bluetooth support for voice annotations and selected Extech equipment. PC software provided. Mobile app available.

Flir T390 Infrared Thermal Image CameraFLI,T390 (4556) AU

Infrared thermal imaging camera. -20°C to 1,200°C. MPEG 4 video recording and composite out, is suitable for almost any application such as electrical surveys, building diagnostics and mechanical inspections. With a 3.5 inch touch screen, Fusion functionality, auto and manual focus, target illuminator, laser locator and voice text annotation. 50Hz refresh rate, IR Resolution 320 x 240, visible light camera 3.1 MP.

TR CalibrationYour Expert for Instrument Calibration, Repair, and Sales

As one of Australia’s leading calibration laboratories, TR Calibration has the expertise and support to offer a range of sales options for our customers.

Our primary sales capabilities include:

3 Approved distributor of GE Air Data Test Set (ADTS) equipment3 Sales of GEC Aircraft and Truck Weighing Platforms3 A selection of electronic and electrical equipment3 A broad range of metrology instruments Whether it be an evaluation or an application specific recommendation, TR Calibration has the experience and industry scope to provide detailed information prior to an equipment purchase.

To discuss your unique requirements, or to learn more about our sales capacity, please call 1300 790 480 or email us at info@trcalibration.com.au

1800 632 652

40

General Industrial www.techrentals.com.au

Infrared Thermal Imaging Cameras cont’d. Infrared Thermal Imaging Cameras cont’d.

Endoscopes, Borescopes & Visual Inspection

Fluke Ti25 Infrared Thermal Image Camera

Fluke TiS55 Infrared Camera

FLU,TI25 MY

FLU,TIS55 (4565) AU/MY

Temperature range -20 to 350°C, accuracy +/-2°C or 2% (whichever is greater). Manual focus. SD memory card (2GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60s voice annotations or 3,000 basic (.bmp) IR images). Infrared camera export file formats JPEG, BMP, GIF, P, TIFF, WMF, EXIF, and EMF. IP54 rating.

Fluke TiS55 thermal imaging camera. Temperature range -20 to 450°C, resolution 220 x 165, 9Hz refresh, NETD 80mK. IR-Fusion technology, manual focus, sighting laser and internal 4GB memory as well as SD card. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive.

Fluke Ti125 Infrared Thermal Image CameraFLU,TI125 (4566) AU

Temperature range -20 to 350°C, resolution 160 x 120, 9Hz refresh. Video recording up to 5 mins, video USB streaming, electronic compass, voice annotation, laser pointer and torch. Auto focus for distances greater than 1.2m, manual focus for shorter distances. Accuracy +/-2°C or 2%, NETD 100 mK.

Fluke Ti32 Infrared Thermal Image CameraFLU,TI32 MY

20 to 600°C, resolution 320x240. Infrared camera applications include inside and outside electrical distribution, motors, pumps, generators, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc). Process industry tanks/vessels, pipes, valves, traps, reactors, and process insulation, HVAC/R.

Fluke Ti32 Infrared Thermal Image CameraFLU,TI32_WIDE-ANGLE MY

Field swappable, wide angle thermal lens allows the user to have a wider field of view for working in tight spaces, small rooms, etc. Field-of-View (FOV) is 46°x 34°. For use with the Ti32 and TiR32.

See also Pipeline & Cavity Inspection on page 62

Fibrescope MTFS15-1000 1.5mm x 1m EndoscopeFIB,MTFS15-1000 (5184) AU

Working length 1,000mm x 1.5mmØ. Includes light source. Operating temperature -20 to 60ºC at atmospheric pressure.

41

Measurement resolution to 0.01mm Shaft diameter range 40 to 150mm using an extension chain 150 to 500mm. Maximum distance between measurement units 0.85m. Very simple to use and operate as shims are applied the alignment can be monitored in real time. 20h of operation from alkaline batteries.

General Industrial

Endoscopes, Borescopes & Visual Inspection cont’d. Endoscopes, Borescopes & Visual Inspection cont’d.

Laser Rotational Shaft Alignment

Tachometers/Stroboscopes

High Speed Video Inspection Cameras

Olympus IPLEX UL 3.5m Handheld Videoscope

Olympus Series C Videoscope, 2m

Olympus IPLEX RT 7.5m Portable Industrial Videoscope

OLY,IPLEX-UL (5182) AU

OLY,SERIES C (5180) AU

OLY,IPLEX-RT 7.5 (5186) AU

IPLEX UltraLite 3.5m, 6mm diameter handheld videoscope. With an integrated control unit and LCD monitor for one handed operation. Intuitive icons for menu control, 120° articulation (up,down,right,left), still image and video recording capabilities (approx. JPEG 300 KB and MPEG-4 600 KB/s), compliant to IP55 and insertion tube operable underwater to 3.5m (excluding stereo tip adapters not included).

6.2mm insertion tube with 8 brightness settings, glare reduction and all direction 120deg articulation. Will capture images in JPEG format or MPEG-4 video which can be stored to a SDHC card or the unit can be connected directly via a USB cable to a PC, also has HDMI output. Applications include turbine inspection, heat exchangers, gearboxes in automotive or electrical power generation, chemical, oil and gas vessel inspection. Recording available per 1GB: about 6,500 images or about 55 minutes video.

Battery powered videoscope. 7.5 meter insertion tube, 6mm diameter, 4 way, 100°articulation and 120° FOV. Applications include inspection of heat exchangers, turbines, gearboxes, automotive parts and aircraft. Still and video recording to USB flash, approx 3,400 images and 30 mins per 1GB.

Olympus IPLEX-LT 7.5 Portable Industrial VideoscopeOLY,IPLEX-LT 7.5 (5188) AU/MY

Battery powered videoscope. 7.5 meter insertion tube, 6mm diameter. 4 way, 120° articulation. Applications include inspection of heat exchangers, turbines, gearboxes, automotive parts and aircraft. Still and video recording to USB flash, approx 3,400 images and 30 mins per 1GB.

Olympus IPLEX LT 3.5m Portable Industrial VideoscopeOLY,IPLEX-LT 3.5 (5190) AU

Lightweight, 2.7kg out of transit case. 8.5mm diameter, 3.5m length tungsten insertion tube. 4 way, 140° articulation. Still and movie recording to USB flash. IP55 compliant. Applications include inspection of, heat exchangers, turbines, gearboxes, automotive parts and aircraft.

Olympus IPLEX- MX II Portable Industrial VideoscopeOLY,IPLEX-MXII (5192) AU

Battery powered industrial vidoscope, lightweight, just 2.5kg out of transit case. 6mm diameter, 3m length tungsten insertion tube, articulation 4 way UP/DOWN/LEFT/RIGHT 120 degree. Field of view 120 degre, depth of field 18 to 1000mm, illumination method LED. Brightness adjustment and digital zoom, built in 6.5 inch TFT colour display, record JPEG images to USB flash device. RCA composite video output. Battery or AC powered.

RF Systems VJ-ADV Articulating 3.9mm Video BorescopeRFS,VJ-ADV (5195) AU

Video borescope is 3.9mm in diameter and 1.5 meters long with a flexible stainless steel braided insertion tube with adjustable brightness and 90 degree 4 way articulation. Images and video can be captured and saved to a micro SD card. Applications include turbine inspection, heat exchangers, gearboxes in automotive or electrical power generation, chemical, oil and gas vessel inspection.

Olympus High Speed CameraOLY,ISPEEDLT (5217) AU

High speed video camera including stand and lighting accessories. 800 x 600 color resolution at 1,000fps. Maximum frame rate 2,000fps. 2.24 sec recording time color camera. 4 x lens kit supplied. Maximum shutter speed 5µs.

Hioki 3404 Optical/Contact Tachometer

Monarch PLT200-KIT Digital Contact/Non Contact Tacho

HIO,3404 MY

MON,PLT200-KIT (5214) AU

Autoranging 4 digit display. Ranges in RPM mode 30 to 99.9, 1,000 to 9,999 & 1,000 to 9,999 x 10. Ranges in RPS mode 0.5 to 99.99, 100 to 999.9 & 1,000 to 1,600. Analogue output 1mV/10RPM or 1mV/100RPM, accuracy 4%. Tripod mounting. Internal battery or external AC operation. Contact adaptor included with cone and peripheral ring.

Hand held digital contact/non-contact tacho kit. Ranges optical/non-contact 5 to 200,000 RPM, contact 0.5 to 20,000 RPM. Display 5 digits, 5 alpha numeric LCD. Non contact operating range 90cm, tripod mounting. Direct contact tips and contact wheel supplied. Programmable for IPM, FT/M, YPM, cm/M, m/M, RPM, RPS, RPH and Totaliser up to 200,000. Output TTL pulse.

Easy-Laser D525 Shaft Alignment SystemEAS,D525 (4944) AU

Includes 14 programs for all types of rotating machines. 13 programs for geometric applications. ‘EasyTurn’ function. Thermal Growth Compensation.

Fixturlaser Dirigo Laser Bases Shaft Alignment SystemFIX,DIRIGO MY

Fixturlaser PAT Pulley Alignment SystemFIX,PAT (4941) AU

Laser based alignment system for pulley systems. Measurement accuracy 0.5mm (0.2º). 20hrs of operation on AAA batteries. Mechanically self centres on pulley, will operate successfully even on worn pulley systems.

1800 632 652

42

General Industrial www.techrentals.com.au

Laser Rotational Shaft Alignment cont’d. Industrial Process Calibrators cont’d.

Industrial Process Calibrators

Pruftechnik Rotalign Ultra Laser Shaft AlignmentPRU,ROT-ULTRA (4945) AU

Laser based rotating shaft alignment system. Maximum separation between emitter and receiver 10m. Aligns horizontal and vertical machines, aligns coupled and uncoupled shafts equally well. Ultra modern computer design, backlit colour display, Intel XScale 400MHz CPU, USB for peripheral devices, PC, printer, also Bluetooth communication. Backlit keyboard, rechargeable Li-Ion battery pack. Machine train alignment - 14 machines. Alignment results in 3 quick steps, thermal growth computation. Rotalign Ultra Reader software included.

Pruftechnik 1500mm Length Tension ChainsPRU,AL12.116 (4946) AU

1500mm length tension chains for PRU,ROT-ULTRA.

Beamex MC5 Multifunction Calibrator NATA CertifiedBEA,MC5 (4731) AU

NATA certified MC5 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results can be stored or printed. Performs as a field-entry device (FED) allowing for the recording of non-calibration related maintenance results. Pressure modules included, -1 to 20 bar and 600 bar. DC voltage & current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation & measurement. Pressure accuracy EXT-600 bar 0.007% FS +0.01% Rdg, INT-20 bar 0.005% FS +0.01% Rdg, temperature coefficient ±0.001 % Rdg/°C outside 15 to 35°degC.

Beamex MC5-IS Multifunction Calibrator NATA CertifiedBEA,MC5-IS (4732) AU/MY

NATA certified MC5-IS provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results can be stored or printed. Performs as a Field-Entry Device (FED) allowing for the recording of non-calibration related maintenance results. Pressure measurement range, -1 to 20bar and 600bar (up to 1,000bar with optional external transducers). DC voltage and current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation and measurement. Pressure accuracy EXT-600 bar 0.007% FS +0.01% Rdg, INT-20 bar 0.005% FS +0.01% Rdg, temperature coefficient ±0.001 % Rdg/°C outside 15 to 35°C.

Beamex MC6 Multifunction Calibrator NATA CertifiedBEA,MC6 (4727) AU

NATA certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results can be stored or printed. Performs as a field-entry device (FED) allowing for the recording of non-calibration related maintenance results. Pressure modules included, -1 to 20bar and 600bar (up to 1,000bar with optional external transducers). DC voltage & current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation & measurement. Colour touch screen. Pressure accuracy EXT-600 bar 0.007% FS + 0.01% Rdg, INT-20 bar 0.005% FS + 0.01% Rdg, temperature coefficient ±0.001 % Rdg/°C outside 15 to 35°C.

Crystal nVision Pressure Calibrator 30 Bar IS NATACRY,NVISION-30-NATA (4757) AU

Intrinsically safe pressure calibrator. Displays real-time recorded data graphically on a high res screen with ability to zoom into specific events. 500,000 data point memory records all data from all enabled screens from two modules simultaneously. Fastest logging interval 10 readings/sec. Configured with MA20 current, voltage and switch test module and 30 bar pressure module, accuracy to 0.025% of reading. Includes hand pump and CPF (finger tight to 700 bar) fittings.

Crystal XP2i 1 Bar (15 psi) NATA with Druck PV411 Hand PumpCRY,XP2I CAL KIT 1 (4735) AU

Range -1 to 1 bar (15 psi) Nata certified pressure gauge with hand pump. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Crystal XP2i 7 Bar (100 psi) NATA with Druck PV411 Hand PumpCRY,XP2I CAL KIT 7 (4743) AU

Range -1 to 7 bar (100 psi) Nata certified pressure gauge with hand pump. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Crystal XP2i 345 Bar (5,000 psi) NATA with Druck PV411 Hand PumpCRY,XP2I CAL KIT 345 (4765) AU

Range -1 to 345 bar (5,000 psi) Nata certified pressure gauge with hand pump. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

43

3 Product research

• Eliminate wasted hours trying to find the right equipment. Let our industry experts recommend a solution. Just provide the details of your requirements and we do the rest.

3 Configuration

• Fundamental errors in configuring the equipment can be eradicated. Our qualified technicians will configure the equipment to your requirements prior to shipping.

3 Equipment training including data collection

• Training that ensures your staff are confident and familiar with their new equipment.

• We can instruct your staff on how to extract equipment results, saving your staff time.

3 Ongoing technical support

• You have priority access to a highly trained team of technical experts experience and knowledge in the operation of the equipment.

3 Annual calibration

• TechRentals will liaise with your staff well in advance to minimise any downtime by pre-booking the equipment calibration at an agreed time. If replacement equipment is available then there will be no downtime experienced at all.

3 Immediate replacement of faulty equipment

• We aim to have any faulty equipment replaced in a time critical manner so on-site disruptions are minimised.

3 Access new technologies and avoid obsolescence

• Keep up-to-date with industry requirements and the latest technology with easy upgrade paths.

• Avoid the potential cost of owning equipment that can be quickly superseded or no longer suited to your business requirements.

3 Account and financial flexibility

• No Capex account process required.

• Cost allocation to specific projects.

• Allows for easy budgeting with simple fixed monthly invoicing.

• Free up your Capital Expenditure budget for other business critical purchases

• Tax allowances on Managed Service payments can be 100% tax deductable and recovered far more quickly than for ongoing asset depreciation.#

Now, more than ever, businesses like yours need to be more productive with fewer resources. Let TechRentals help make your test and measurement equipment requirements work smarter, all the while saving you time and money to focus on your core business.

TechRentals’ Managed Solutions

techrentalsTo ensure your peace of mind, TechRentals draws upon its 40 years of experience to take the guess work out of your instrumentation needs. By working with you we will deliver your business a seamless solution.

#Please ensure you obtain independent professional taxation advice.

1800 632 652 rent@techrentals.com.au www.techrentals.com.au

M e l b o u r n e • S y d n e y • N e w c a s t l e • B r i s b a n e • T o w n s v i l l e • A d e l a i d e • D a r w i n • P e r t h

44

General Industrial www.techrentals.com.au

Industrial Process Calibrators cont’d. Industrial Process Calibrators cont’d.

Crystal XP2i 690 Bar (10,000 psi) NATA with PV411 Hand PumpCRY,XP2I CAL KIT 690 (4770) AURange -1 to 690 bar (10,000 psi) Nata certified pressure gauge with hand pump. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Druck DPI603 20 Bar Pressure Calibrator DRU,DPI603-20 MY

Accuracy 0.075%FS. Pumps up to 20 bar pressure & -850mbar vacuum. Measures up to 20 Bar pressure and -1 bar vacuum. In-built 24V energising voltage. Monitors loop current to 55mA. Loop voltage to 50V. Interface 1/8” bsp. Battery operated.

Druck DPI104 350 Bar Pressure Calibrator & HTP1 Hydraulic PumpDRU,DPI104-350 MY

Range 0 to 350 bar. Measures 0 to 100mV (1µV resolution), 0 to 5V (0.1mV resolution), 0 to 50V (1mV resolution) & current 0 to 50mA (1µA resolution) all @ 0.025% accuracy. Sources 0 to 10V (0.2mV resolution) & 0 to 50mA (1µA resolution) @ 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA & unregulated supply 24V ±10% current 50mA. Pressure switch status. Pressure media oil, water & non corrosive gases. Battery operation 10h or mains operation via charger. Complete with a full range of pressure connection adaptors.

Druck DPI610-2-NATA 2 Bar Pressure Calibrator DRU,DPI610-2-NATA (4737) AUDRU,DPI610-2 MY

Pneumatic pressure calibrator including pump and current voltage standard. Pressure range -1 to 2 bar, ±0.025%FS. Voltage input ±50VDC, ±0.05%rdg, ±0.004%FS. Current input ±55mA, ±0.05%rdg, ±0.004%FS. Temperature -10~40°C, ±1 (ambient) switch open/closed. Voltage output 10VDC, ±0.1% or 24V ±5%. Current output 0 to 24mA ±0.05% rdg ±0.01%FS. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f), includes flexible hose kit. Pump includes screw adjustment.

Druck DPI610 20 Bar Pressure Calibrator DRU,DPI610-20 MY

Pneumatic pressure calibrator including pump and current voltage standard. Pressure range -1~20 bar +/- 0.025% FS. Voltage input +/- 50 VDC +/-0.05% rdg +/- 0.004% FS. Current input +/-55mA +/-0.05% rdg +/- 0.004% FS. Temperature -10~40°C +/-1°C (ambient) switch open/closed. Voltage output 10 VDC +/-0.1% or 24 V +/-5%. Current output 0~24 mA.

Druck DPI610-400-NATA 400 Bar Pressure Calibrator DRU,DPI610-400-NATA (4768) AU / DRU,DPI610-400 MY

0.075% FS Accuracy includes pump for vacuum and pressure. Unit will pump up to 2 bar pressure and -850mBar vacuum. Measurements can be made to 2 bar positive pressure and -1 bar vacuum. Unit has a 24V energising voltage. Monitors loop current to 55mA DC loop voltage to 50V. Sealed to IP65. Rechargeable battery operated. Unit can display in 24 different units. BSP 1/8 interface.

Druck DPI 611-2-NATA 2 Bar Pressure Calibrator

Druck DPI620 GENII 350 Bar Pressure Calibrator

DRU,DPI611-2-NATA (4736) AU / DRU,DPI611-2 MY

DRU,DPI620-350-NATA (4767) AU / DRU,DPI620-350 MY

IPLEX UltraLite 3.5m, 6mm diameter handheld videoscope. With an integrated control unit and LCD monitor for one handed operation. Intuitive icons for menu control, 120° articulation (up,down,right,left), still image and video recording capabilities (approx. JPEG 300 KB and MPEG-4 600 KB/s), compliant to IP55 and insertion tube operable underwater to 3.5m (excluding stereo tip adapters not included).

Genii advanced modular pressure calibrator with HART, includes hydraulic pressure station with 1/8 BSP(G) or 1/4 NPT test port and 350 bar gauge and absolute pressure module, accuracy 0.005 and 0.015 %FS respectively. Compact electrical, frequency, temperature calibrator and HART communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/Indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners.

Druck DPI 611-20-NATA 20 bar Pressure CalibratorDRU,DPI611-20-NATA (4748) AUDRU,DPI611-20 MY

Fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power. Generates from 95% vacuum to 20 bar/300 psi pneumatic pressure with 0.0185% FS accuracy. Calculates PASS/FAIL errors and documents results. User Guide stored in the memory of the instrument, 3-touch set-up for any application.

Druck DPI615-20-NATA 20 Bar Pressure CalibratorDRU,DPI615-20-NATA (4750) AU

Pneumatic pressure calibrator including pump and current voltage standard. Pressure range 0 to 20 bar ±0.025% FS. Voltage input ±50VDC ±0.05% rdg ± 0.004% FS. Current input ±55mA ±0.05%rdg ±0.004%FS. Temperature -10 to 40ºC ±1ºC (ambient) switch open/closed. Voltage output 10VDC ±0.1% or 24V ±-5%. Current output 0 to 24mA ±0.05%rdg ±0.01%FS. Data logger stores upto 10,000 values. mA ramp configurable. Pressure port G 1/8 female, includes flexible hose. Pump includes screw adjustment.

Druck DPI620 GENII 20 Bar Pressure CalibratorDRU,DPI620-20-NATA (4749) AU

Advanced modular pressure calibrator with HART, includes pneumatic pressure station with 1/8 BSP(G) or 1/8 NPT test port, -1 to 20 bar pressure module and an accuracy of ±0.005% FS. Compact electrical, frequency, temperature calibrator and HART communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners. Accuracy 0.020% FS (0°C to 50°C), 0.005% FS (at 20°C ±2°C).

45

General Industrial

Industrial Process Calibrators cont’d. Industrial Process Calibrators cont’d.

Druck DPI620 GENII 1000 Bar Pressure CalibratorDRU,DPI620-1000 MY

Genii advanced modular pressure calibrator with HART, includes hydraulic pressure station with 1/8 BSP(G) or 1/4 NPT test port and 1000 bar gauge and absolute pressure module, accuracy 0.005 and 0.015 %FS respectively. Compact electrical, frequency, temperature calibrator and HART communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/ indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners.

Druck DPI 620 Genii Process Calibrator with HARTDRU,GENII (4778) AU

An electrical, frequency and temperature calibrator with HART communicator. Provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners. NATA certified.

Druck PV411A Multifunction Hand Pump KitDRU,PV411A (4789) AU/MY

Provides up to 700 bar hydraulic, 40 bar pneumatic pressures and vacuum to -950mbar. Built-in stroke adjuster, lower pressure fine control and tamper proof overpressure protection.

Druck UPS III-IS Intrinsically Safe Loop CalibratorDRU,UPS III-IS (4777) AU

Measure or source 0 to 24mA and provide 24V loop power. 50 VDC measurement and continuity. Accuracy 0.015% of reading, Hart compatible. Dual mA and % readout, linear or flow. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy-to-read display and simple-to-use time saving features.

Emerson Process Management 375 Field Communicator EME,375 MY

Will configure, test, and diagnose your HART® and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. Intrinsically safe. Easy upgrade over the Internet. Interfaces with AMS PC Suite Software.

Emerson 475 Hart CommunicatorEME,475 (4794) AU/MY

Will configure, test, and diagnose your HART® and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. Intrinsically safe. Easy upgrade over the Internet. Interfaces with AMS PC Suite Software.

Softing BC-600-PB Profibus Tester 4SOF,PROFIBUS-4 (4723) AU

Allows full testing of live PROFIBUS segments with minimum influence on their operation. Detects transient faults that occur sporadically. Test for non operation PLCs or suspicious devices. Simultaneous analysis of both bus physics and bus communication. Master simulator and Topology scan. Expert tests: frame, oscillogram analysis and trigger input/output. Long term trend measuring, preventive maintenance and detailed test reporting.

Fitting Set with 700 Bar Hose

Fitting Set With 20 Bar Hose

FIT,HP MY

FIT,LP MY

Fitting set (max pressure = 10,000 psi) for pressure calibrators. Comes with 700 Bar Hose, 20 Bar Hose and varous connectors. Female connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP & NPT; 3/8 inch BSP & NPT; 1/2 inch BSP & NPT.

Fitting set (max pressure = 3,000 psi) for pressure calibrators. Comes with 20 Bar Hose and varous connectors. Female connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP & NPT; 3/8 inch BSP & NPT; 1/2 inch BSP & NPT.

Fluke 70 Bar Pressure Transducer & Pump suits FLU CalibratorFLU,700P08-70BAR (4762) AU

Pneumatic transducer and pump system, range 0 to 70 bar, resolution 7 mbar, reference uncertainty 0.025%. Connection 1/4NPT and 1/4 ISO. Includes 700PTP-1 pressure pump (Note the pump will operate to 41Bar). Suitable for use with Fluke Pressure, Documenting and Process Calibrators such as the 725, 744, 754 etc. Nata certified.

Fluke 690 Bar Pressure Transducer & PumpFLU,700P31-690BAR (4771) AU

Range 0 to 690 bar, reference uncertainty 0.025%. Connection 1/4 NPT and 1/4 ISO. Includes 700HTP-1 pressure pump. Suitable for use with Fluke Pressure, Documenting and Process Calibrators such as the 725, 744, 754 etc.

Fluke 345mbar Pressure Transducer & PumpFLU,700PD3-345 MBAR (4734) AU

Dual pressure module, range +/-350mbar differential or guage, reference uncertainty 0.04%, connection 1/4 NPT. Fluke hand pump 700LTP-1 included. Suitable for use with Fluke Pressure, Documenting and Process Calibrators such as the 725, 744, 754 etc. Nata certified.

Fluke 7 bar Pressure Transducer & PumpFLU,700PD6-7BAR (4745) AU

Range 1 to 7 bar, reference uncertainty .025%. Connection 1/4NPT and 1/4 ISO Includes 700LTP-1 pressure pump. Suitable for use with Fluke Pressure, Documenting and Process Calibrators such as the 725, 744, 754 etc.

Fluke 719 2 Bar-30G Pressure Calibrator including Electric PumpFLU,719-30G (4740) AU

2 bar, includes pump and precision 4 to 20mA measurement and source capability. The pump in this instrument is electric. Uncertainty 0.025%. Precision pressure adjustment vernier. Range -850mbar to 2 bar. Resolution 0.1mbar. 4 to 20mA resolution .001mA .015%rdg + 2 counts.

Fluke Pressure Calibrator 8 Bar includes Electric PumpFLU,719-100G MY

8 bar, includes pump and precision 4 to 20mA measurement and source capability. The pump in this instrument is electric. Uncertainty 0.025%. Precision pressure adjustment vernier. Range -850mbar to 8 bar. Resolution 1mBar. 4 to 20mA resolution 0.001mA 0.015%rdg + 2 counts.

1800 632 652

46

General Industrial www.techrentals.com.au

Industrial Process Calibrators cont’d. Industrial Process Calibrators cont’d.

Fluke 753 Documenting Process CalibratorFLU,753 MY

Provides simultaneous source and measure volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate transmitters. It can power transmitters during test, using loop supply with simultaneous mA measurement; measure/source pressure; create and run automated as-found/as-left procedures to satisfy quality programs or regulations; record and document results. Holds up to a full week of downloaded procedures and calibration results. Features include autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.

Fluke 725 Process Calibrator

Fluke 726 Process Calibrator

FLU,725-NATA (4784) AUFLU,725 MY

FLU,726 MY

Dual measure/source multifunction process calibrator. Measure DC 30 V, resistance 3200Ω, 24mA and more. Source/simulate DC 10V, 24mA, 3200Ω, 12 types of TCs and 7 types of RTDs. Power transmitters with internal loop supply. Split display allows view of input and output values. (Includes NATA calibration - AU).

Precision multifunction process calibrator. DC voltage measurement. 0.010% 30V max, source 0.010% 20V max. DC current measurement. 0.010% 24mA max, source 0.01% 24mA max. Resistance measurement 0.015% 4kΩ max, source 0.01% 4kΩ max. Frequency measurement 5 counts 1Hz to 15kHz, source 1 count 20Hz to 15kHz. Will measure and simulate 4 to 20mA, TC E N J K T B R S and C, 2, 3 and 4 wire RTDs and frequency. Loop power supply at: 24V, 22mA. Pulse Source 10k and read 100k. The unit operates from drycell batteries.

Fluke 754 Documenting Process Calibrator with HARTFLU,754 (4781) AU

Offers simultaneous source and measure capabilities for all common process parameters. Measure/source volts, mA, RTDs, thermocouples, frequency, and ohms for the calibration, maintenance, and troubleshooting of test sensors, transmitters and other instruments. Compatible with all Fluke 700Pxx pressure modules. Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Features include autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.

Fluke 773 Milliamp Process Clamp MeterFLU,773 (4779) AU

Measure 4 to 20mA control lines, PLC loops, transmitters or any 4 to 20mA line without breaking the loop. Capable of 0 to 20.99mA and 24 to 100mA with clamp. Source and simulate mA and voltage signals in circuit. 4 to 20mA scaled o/p.

Fluke 789 Process MeterFLU,789 PROCESSMETER (4786) AU/MY

Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250Ω resistor, 20mA drive into 1,200Ω. Simultaneous mA and % of scale readout on mA output. 25% manual step plus auto step and auto ramp on mA output. Min/max/average/hold/relative modes. Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA DC 0.05% +2, frequency 0.005% +1.

Jofra DPC-500 Documenting Pressure Calibrator 1000 Bar NATAJOF,DPC-1000-NATA (4775) AU

Documenting pressure calibrator is used for high precision calibration of pressure gauges, pressure transmitters, digital manometers, pressure switches, overpressure protection valves etc. Measure pressure at 1,000 bar or 14,500 psi, voltage 0 to 10V, current 0 to 20mA and 4 to 20mA, and supplies 24VDC as source for transmitters. Accuracy ±0.025% F.S. Supplied with Druck PV212 1,000 bar hand pump and calibration software. 15 user selectable engineering units including user defined. Nata Calibrated.

SI PC6 20 Bar NATA Pressure Calibrator & Pump SI,PC6-20-NATA (4753) AU

Basic accuracy 0.025%. Range output pressure to 20 bar, output vacuum to -1 b. NATA certified Instrument. Measures voltage 0~100mV (1µV resolution), 0~5V (0.1mV resolution) & 0~50V (1mV resolution) and current 0~50mA (1µA resolution) all at 0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1µA resolution) also at 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10% current 50mA. Pressure switch status. Battery operation 10h or mains operation via charger.

SI PC6 35 Bar NATA Pressure Calibrator & PumpSI,PC6-35-NATA (4759) AU

Basic accuracy 0.025%. Range is 35 bar. Measures voltage 0~100mV (1µV resolution), 0~5V (0.1mV resolution) & 0~50V (1mV resolution) & current 0~50mA (1µA resolution) all at 0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1µA resolution) also at 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10% current 50mA. Pressure switch status. Complete with a full range of pressure connection adaptors. Record logging capability 444 and RS232 interface download to spread sheet files. Battery operation 10h or mains operation via charger.

To complement our highly qualified technical support team, we are creating a range of informative how-to videos for equipment in our rental inventory. If you see a QR code on your equipment,

simply scan the code with a QR mobile phone app to watch the relevant video. As we are constantly adding videos and QR codes to our fleet, be sure to check our YouTube channel for all the available videos, and do not hesitate to contact our team if you have any questions.

Watch how-to videos using QR Codes

47

General Industrial

Wet & Dry Block Calibrators Wet & Dry Block Calibrators cont’d.

Strip Chart Recorders

High Speed Waveform Recorders

Fluke 9144 Dry Block Temperature Calibrator 50 to 660°C NATA CertificationFLU,9144-NATA (4833) AU

Field metrology well, NATA certified. Range 50 to 660°C, display accuracy ranges from ± 0.35°C and stability from ±0.03°C. Insert ‘A’ hole sizes 9.52mm(3/8”) 2x 6.4mm(1/4”), 4.75mm(3/16”) and 3.17mm(1/8”). Well depth 150mm (5.9”). Includes PC software and interface cable.

Fluke 9150 Thermocouple Furnace 150 to 1,200°C NATA CertifiedFLU,9150-NATA (4840) AU

Temperature range 150 to 1,200°C. Stability ±0.5°C, display accuracy of ±5°C across entire range. Display resolution 0.1 to 999.9°C, 1 degree above 1,000°C. Well diameter 32mm, well depth 140mm, insert type 9150-A (3150-2) with hole sizes of 1.6, 3.2, 6.4, 9.5 and 12.7mm. Heating time 35min to 1,200°C, cooling time 140min.

FLuke 9170 Dry Block Temp Calibrator -45 to 140°C NATA CertifiedFLU,9170-NATA (4825) AU

Metrology dry well calibrator temperature range -45 to 140°C. Display accuracy +/-0.1°C, stability +/-0.005°C full range, resolution 0.001°C. Well depth 160mm (6.3”). Insert type A with hole sizes; 3x 6.4mm(1/4”), 4.8mm(3/16”), 3.2mm(1/8”), 9.5mm(3/8”) and 19mm(3/4”). Large LCD, numeric keypad and on screen menus.

Fluke 9170-R Dry Block Temperature Calibrator -45 to 140°CFLU,9170-R-NATA (4825) AUFLU,9170-R MY

Metrology dry well calibrator. Temperature range -45 to 140°C with built in reference thermometry. Reference input accepts (not supplied) 100, 25 and 10Ω PRT’s. Display accuracy +/-0.1°C, stability +/-0.005°C full range, resolution 0.001°C. Well depth 160mm (6.3”). Insert type A with hole sizes; 3 x 6.4mm (1/4”), 4.8mm (3/16”), 3.2mm (1/8”), 9.5mm (3/8”) and 19mm (3/4”). Large LCD, numeric keypad and on screen menus.

Grant GR150-S5 Temperature Bath NATA CertificationGRA,GR150-S5-NATA (4820) AU

Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100°C with water and 150°C with silicon oil. Requires 3L oil (not supplied). Stability 0.005°C, uniformity 0.02°C and display resolution 0.1°C. Tank size 300mm W x 150mm D x 150mm H. Features include digital temperature controller and display, timer, alarms, offset adjustment and more.

Jofra CTC-650A Temperature CalibratorJOF,CTC-650A MY

Exceptionally fast and has deep immersion depths of 110mm (4.3 inch). Heats up to the maximum temperature in just 20 minutes. Temperature range: 33 to 650°C. Accuracy: 0.9°C. Stability: 0.1°C. Multi-Hole insertion tube: 1/4”, 1/8”, 3/8” and 3/16”.

Jofra CTC-1200A Temperature CalibratorJOF,CTC-1200A MY

Compact temperature calibrator. Lightweight, portable for lab and general use. Temperature range: 572 to 2200ºF (300 to 1205ºC). Excellent Performance Characteristics. Accuracy: ±4.0ºF (±2.0ºC). Stability: +1.0ºF (+0.5ºC). Stability Time: 20 minutes. Display in F or C to 0.1 resolution. Fast cooling and heating. User-selectable Slope Rates for controlled. Thermo switch testing. Self Diagnostics includes Semi-Auto Switch Test and Hysteresis Test. Size of thermowell/insert: 6.5mm & 10mm. 1/4” probe. 1/2” probe.

Rototherm C105 10,000 psi Pressure Recorder

Rototherm C105 16,000 psi Pressure Recorder

ROT,C105 MY

ROT,C105-6K MY

Single pen recording. (±)1% span maximum. 1/2”(M) BSP connection. 255 mm diameter, circular chart paper.

Single pen recording. (±)1% span maximum. 1/2”(M) BSP connection. 255 mm diameter, circular chart paper.

Hioki 8841 8 Analogue, 16 Channel Memory RecorderHIO,8841 (4117) AU

Memory 12bits x 4 megawords/ch for 2 analogue ch, to 1 megawords/ch for 8ch. In-built FDD, type III PCMCIA card slot (for flashcard & HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real time record, RMS, real time/memory, X-Y memory, FFT. Trigger functions level, window in, window out, voltage drop, RMS level, cycle, logic pattern trigger 1,0 or X (disregard). When using logic channels, logic probes must be rented separately. Measurement range 400VDC, 240V rms, low pass filters 5Hz, 500Hz, 5kHz or 100kHz, input coupling DC, GND, AC. Large 10.4” colour TFT display for settings and waveform display, wide thermal printer fitted. On screen help function. All settings and waveforms can be saved to media, waveforms can be saved as binary, text or bmp files.

Hioki 8842 16 Analogue, 16 Logic Channel Waveform RecorderHIO,8842 (4150) AU

Memory 12bits x 16 megawords/ch for 2 analogue ch, to 2 megawords/ch for 16 ch. Analogue input channel ranges 10mV to 50V per div, 10X div, 400VDC, 240Vac rms max. In-built FDD, type III PCMCIA card slot (for flashcard & HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real time record, RMS, real time/memory, X-Y memory. Trigger functions level, window in, window out, voltage drop, RMS level, cycle, logic pattern trigger 1,0 or X (disregard). When using logic channels, logic probes must be rented separately. Measurement range 400VDC, 240V rms, low pass filters 5Hz, 500Hz, 5kHz, or 100kHz, input coupling DC, GND, ac. Large 10.4” colour TFT display for settings and waveform display, wide thermal printer fitted. On screen help function. All settings and waveforms can be saved to media, waveforms can be saved as binary, text or bmp files.

1800 632 652

48

Hioki 8421-51 16 Channel Data Logger with Colour DisplayHIO,8421-51 (4271) AU

General Industrial www.techrentals.com.au

High Speed Waveform Recorders cont’d.

Data Loggers

Data Loggers cont’d.

Hioki 8860 8 Channel High Speed Memory RecorderHIO,8860 (4129) AU

High speed memory recorder, 20MS/s sampling rate, 8 analogue channels, 16 logic channels, built in printer. 512MW or direct access memory, 60GB hard drive built-in, PC card type II slot up to 4GB ATA flash card (optional) USB, LAN interface and large colour screen.

Hioki 8938 FFT Input Signal Module

Hioki 9335 Wave Processor Software for Hioki 8835, 8835-01, 8841, 8842

HIO,8938 (4138) AU

HIO,9335 (4155) AU

FFT Module with anti-aliasing filter. Frequency range DC to 400kHz, sampling rate 1MS/s. Maximum input voltage 400VDC, 240V rms.

Waveform Processor software, displays, converts to CSV, calculates and prints waveforms with a PC. Review stored binary files from Hioki 8835, 8835-01, 8841 and 8842 memory recorders. Only way stored binary files can be viewed on a PC without having to re save them with memory recorder as text files.

Datataker CANGATE Gateway & Garmin 5Hz GPSDE,CANGATE (4236) AU

Interface to allow dataTaker loggers and PC (via RS232) to access CANBUS networks including J1939 & OBD2. The device also includes a Garmin 5Hz GPS system.

DataTaker DT80 5 to 15 Channel Logger with USB Memory Stick DownloadDE,DT80 MY

Measures voltage, current, resistance and frequency. Up to 15 analogue (±30V) sensor inputs. Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. 12 flexible digital channels. Expandable to 300 analogue inputs. Store up to 10 million data points in user defined memory.

DataTaker DT80M 5 to 15 Channel Logger with Built in ModemDE,DT80M (4234) AU

Includes a built in GSM modem for internet access to the device supports 2G and 3G networks (GSM/GPRS/EDGE/WCDMA). Measures voltage, current, resistance and frequency. Up to 5 analogue (±30V) sensor inputs. Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. Store up to 10 million data points in user defined memory. Generally used at sample rates of 1Hz and slower.

Datataker DT85 48 Channel Logger with USB Memory Stick DownloadDE,DT85 (4233) AU

Analogue inputs 32 isolated and 48 single ended inputs. 2 x 4 digital input types. 2 x serial sensor ports, Modbus capability, 4 x SDI12 channels, USB memory stick interface for easy data and programming etc. Operating time on the internal battery is 1s sample 2.4h. 5s sample 3 days, 1min sample 1 month.

ETM 9900 Intelligent Modem and IO. Sends SMS MessagesETM,9900 (4290) AU

Can send a user defined alarm message via SMS. Has 7 IO channels. Will provide alarm messages for instruments such as the ARL,NGARA, PRO,VIBRA & the TSI,8520 & 30. Will operate for around 4 months on 2xD cell batteries when the alarm status is checked once per hour. Can be put on site and remotely programmed.

Hioki 3641-20-Kit of 8 Temperature & Humidity LoggersHIO,3641-20-KIT (4256) AU

Kit of 8 x temperature and humidity loggers. Includes 1 x RS232C and 1 x USB communication base, utility software, RS232C and USB interface cables. Environment conditions for operation -20 to 70ºC, 80%RH (no condensation) Accuracy: Temperature -40 to -0.1ºC ±1ºC, 0 to 35ºC ±0.5ºC, 35.1 to 70ºC ±1ºC. Humidity typical between ±5 to ±10% depends on temperature and humidity range. 8000 data points x 2 channels, recording interval 2,5,10,15,20,30s and 1, 2, 5, 10, 15, 20, 30, 60min.

10 Channel Memory Logger with isolated channel to 60VDC which will take thermocouples. 10ms sampling USB interface and USB memory stick. Logging software included. Log directly to memory stick. Includes battery for 2.5hrs continuous operation.

Hioki LR8431-20 10 Channel Memory LoggerHIO,LR8431-20 (4280) AU/MY

16 analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot, LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP and HTTP. Signal inputs- 100 mVDC, 1VDC, 10 VDC, 60VDC, 1-5VDC FS. Thermocouples K, E, J, T, N, W (WRe5-26), R, S, B, -100 to 100ºC, -200 to 500ºC, -200 to 2,000ºC, RTD Pt100 -200 to 800ºC. Pulse input, accumulation 50,000C FS, 500,000C FS, 5MC FS, 100MC FS, 2,500MC FS. Rotation 5,000/n (r/s) FS. Recording interval selectable from 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 20s, 30s, 1min, 2min, 5min. Max sampling rate is dependent upon type of input signal. Internal Memory 16MB, 512MB PCMCIA FLASH card, 9334 Logger Communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied. Improved common mode rejection -100dB or better when 50/60Hz, 140dB or better when 50Hz, using ch1 to ch16, interval 5s, digital filter 50Hz selected. Faster sampling when using Pt100, improved temperature characteristics.

Hioki Kit of Three 9322 Differential Probe High Voltage True RMS InterfaceHIO,9322-KIT (4119) AU

Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC mode for waveform monitor output DC to 3MHz, AC mode detection of power surge noise 1kHz to 10MHz. Rectified true RMS output of dc & ac voltages. 40Hz to 100kHz response speed 200ms or less. Max voltage DC 2kV, ac 1kV CATII, AC/DC 600V CATIII, balanced differential input 1/1,000 divider.

49

General Industrial

Data Loggers cont’d. Pressure Vacuum Gauges/Recorders cont’d.

Pressure Vacuum Gauges/Recorders

Keysight 34980A Multifunction Switch/Measure UnitKEY,34980A MY

34980A multifunction switch/measure unit is a flexible, reliable switching and data acquisition platform. Suitable in design verification, automated test and data acquisition. 8-slot mainframe with 21 mix-and-match plug-in modules. Scans up to 1000 ch/sec. Built-in 6½ digit DMM.LAN, USB 2.0, and GPIB connectivity, BenchLink data logger software for easy data collection and analysis. Includes 34934A Quad 4x32 Reed Matrix, 34937A, 32 channel form C/Form A general purpose switch and 34952A multifunction module with 32-bit DIO, 2-ch D/A and totalizer.

Testo 175-H1 Temperature & Humidity LoggerTES,175-H1 (4251) AU/MY

Large Display. 3 year battery life, 1 million sample memory. RH 0~100% ±2%, temp -20~50ºC ±0.4ºC. Includes USB interface to download data.

Testo 184 G1 Temperature, Humidity & Acceleration Data Loggers Kit 10

Testo Saveris2 H2 kit of 10 Temperature Humidity loggers

TES,184G1-KIT10 (4252) AU

TES,SAV2-H2-10KIT (4250) AU

Kit of 10 Temperature, Humidity & Shock Loggers. Simple to use with a tamperproof design. -20~70DegC, 0~100%RH & 0~27g. HACCP Certified. Has built in USB port and will download to Android devices using NFC. Battery life 120Days (15min sampling). Includes software for download of data to A PC. Saves data by default to a PDF file.

Kit of 10 includes a preconfigured WiFi hotspot so the 10 loggers will save their data to the cloud. The logged data is available on line. The temperature sensor 0~40DegC +/- 0.3 DegC, Humidity sensor 0~100% +/-2%RH. 4mm diameter remote probe.

See also Air Conditioning & Air Flow on page 58

Crystal XP2i Digital Logging Pressure Gauge 7 Bar NATA calibrated

Crystal XP2i Digital Logging Pressure Gauge 70 Bar NATA calibrated

Crystal XP2i Digital Logging Pressure Gauge 700 Bar NATA calibrated

Crystal XP2i Digital Logging Pressure Gauge 206 Bar NATA calibrated

CRY,XP2I-100-NATA (4341) AU

CRY,XP2I-1K-NATA (4342) AU

CRY,XP2I-10K-NATA (4344) AU / CRY,XP2I-10K MY

CRY,XP2I-3K-NATA (4343) AU / CRY,XP2I-3K MY

Range -1 to 7 bar (100 psi) Nata certified pressure gauge. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Range 70 bar (1K psi) resolution 0.1m bar. Accuracy is 0.1% of reading, down to 20% of the range. Vacuum accuracy 0.25% of -1 bar (-14.5 psi). Generation 3 gauges have 32,000 point logging capacity at intervals down to 125 msec (in PSV mode). Generation 2 gauges have 6,000 point logging capability at intervals from 1 sec. Logs actual pressure, average pressure, average pressure with max and min and on demand. 1/4 NPT connector. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Range -1 to 206.8 bar (3,000 psi) Nata certified pressure gauge. Accuracy, +/-0.1% of reading between 20 to 100% of full scale, +/-0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Range -1 to 690 bar (10,000 psi) Nata certified pressure gauge. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

Range -1 to 20 bar (300 psi) Nata certified pressure gauge. Accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Generation 3 gauges have 32,000 point logging capacity at intervals from 1 second to 18 hours, ULP (Ultra Low Power) setting allowing logging for 1 year and PSV/PRV (Pressure Safety/Pressure Relief Value) mode increasing measurement rate to approx. 8x per second. Gen 2 gauges have 6,000 points and logging intervals from 1 second to 18 hours. Logs actual pressure, average pressure, average pressure with peaks and, on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards.

GE Druck Wireless Air Data Test SetGE,ADTS542F (4350) AU

Wireless Air Data Test Set. Pitot Static Tester for Aircraft Maintenance. Remote control unit for easy in cockpit control of instrument settings. Self-contained rechargeable battery operated allows 8 hrs of continuous use. Small light weight unit (14kg). Accuracy suitable for RVSM validation. Includes ECAS Low Airspeed option for Rotary Wing Aircraft.

Crystal XP2i Digital Logging Pressure Gauge 20 Bar NATA calibrated

CRY,XP2I-300-NATA (4341) AU

1800 632 652

50

General Industrial www.techrentals.com.au

Flow Meters for Liquids & Gases Flow Meters for Liquids & Gases cont’d.

See also Environmental Flow Meters on page 69 See Also GLO,FP111 Global FP111 Digital Water Velocity Meter on page 69

See page 51 for a case study on the PT878GC

Flexim Ultrasonic Gas Flow MeterFLE,G608 (6156) AU

Ultrasonic flow meter is a clamp-on transit time gas and liquid flow meter, 2-channel, with Zone 2 Ex-certification for use in hazardous areas. Supplied with three transducer pairs and a pipe wall thickness gauge; includes an integral data-logger with more than 100,000 measured values, easy-to-use software for trending the data and an integral Lithium-ion rechargeable battery with AC adapter. The GLK transducers are suitable for 4 to 9mm wall thickness, the GLM 2 to 5mm and the GSM 2.5mm and greater. Utilises either Shear wave (standard) transducers, or Lamb wave (specialist gas) transducers. The Lamb wave transducers resonate the pipe wall to amplify the signal strength, thereby allowing it to measure applications at significantly lower pressures than the standard Shear wave transducers.

Portable non-contact gas flowmeter using transit-time principle. For operation with ultrasonic transducer-kits (PAN,GC-RL302 & PAN,GC-RL319) - available separately. Compatible with metal or plastic pipes in the range 20 to 300mm. Suitable for use with compressed air, natural gas and other gases. Readout for flow velocity, actual or standard volumetric flow or mass-flow in numerical or graphic format. Internal logging for 100K flow data points. Infrared communications port for download to PC or printer interface. Rechargeable battery for 8h continuous operation.

Portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and 2 sets of transducers, one 12.5mm to 50mm the second 50mm to 600mm diameters & temperatures -20 to 210 degC with clamping fixtures. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Outputs analog 4 to 20mA, digital (pulse or frequency) and USB port. Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/charger.

Portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and 2 sets of transducers, one 12.5mm to 50mm the second 50mm to 600mm diameters & temperatures -20 to 210°C with clamping fixtures. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Outputs analog 4 to 20mA, digital (pulse or frequency) and USB port. Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/charger.

GE Panametrics PT878GC Ultrasonic Gas Flow Meter

GE Panametrics PT878E Ultrasonic Liquid Flow Energy Meter

GE Panametrics PT878T Flowmeter including Liquid Thickness Gauge

PAN,PT878GC-01 (6151) AU

PAN,PT878E (6102) AU

PAN,PT878T (6103) AU/MY

Gas-flow Small Pipe Transducer Kit for PT878GCPAN,GC-RL302 (6153) AU

Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 1MHz for pipes in the range 20 to 55mm typical. General purpose use for process temperatures -40 to 176°C. Supplied with two precision gauged clamping fixtures for pipe range.

Gas-flow Medium Pipe Transducer Kit for PT878GCPAN,GC-RL319 (6155) AU

Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 500kHz for pipes in the range 75-300mm typical. General purpose use for process temperatures -40 to 176°C. Supplied with set of three precision gauged clamping fixtures for pipe range.

GE Panametrics PT878 Ultrasonic Liquid FlowmeterPAN,PT878 (6101) AU/MY

Portable non-contact liquid flowmeter using transit-time principle. Includes transducers for pipe 50mm to 2m diameter and temperatures -40 to 130°C (various alternative transducers available) with clamping fixture. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Analog inputs compatible with temperature transmitters for energy-flow calculations. Outputs analog 4 to 20mA, digital (pulse or frequency) and printer/computer (Infrared port). Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/charger.

GE Panametrics 12 to 50mm TransducersPAN,C-LP-40NM MY

Transducer pair for PAN,PT868/878 transit-time flowmeter to suit pipe 12 to 50mmØ. Complete with CF-LP-50M mounting bracket. Temperature range -40 to 120°C.

GE Panametrics -200 to 400°C TransducersPAN,OKS (6112) AU

Very high temperature, wide range transducer pair for PAN,PT868/878 transit-time flowmeter. Temperature range -200 to 400°C, for pipe 80mm to 600mmØ. Uses special clamp system supplied. Appropriate protection and safe-handling equipment is required for fitting and operation at very high or low temperatures.

Polysonics Hydra SX30 Dual Frequency Doppler Liquid FlowmeterPOL,HYDRA-SX30-2 (6132) AU

Dual frequency doppler ultrasonic non-contact flowmeter. Velocity range 0.06 to 10m/s, accuracy ±1%. Pipe size range 12 to 5,000mm diameter. Data logging for 90,000 points, with PC software and interface cable for download via RS232C interface. Transducer temperature range -40 to 122°C. Analogue output 4 to 20mA. Battery operated, 12h continuous use (8h recharge).

New items are being added to the inventory constantly, so if you can’t see what you’re looking for, please call us on 1800 632 652.

51

General Industrial

Combustion, Flue & Industrial Gas Analysers Combustion, Flue & Industrial Gas Analysers con’td

See also Environmental Gas & Vapour Meters on page 69

Novatech O2 and CO2 Analyser/TransmitterNOV,1637-5 (5954) AU

Oxygen and carbon dioxide analyser for packaging atmosphere, general industrial and research use. Oxygen sensor reading 1ppm to 100% with 1% accuracy. NDIR carbon dioxide analysis 0 to 100% ±3% of full scale. 2 x 4 to 20mA outputs, 1 common & 3 selectable alarm relays. Gas connection 1/8 Swagelok. Flow rate with internal pump 100 to 500cc/min. AC operation.

Testo 335 Combustion Gas AnalyserTES,335 (5913) AU/MY

Portable industrial flue gas analyser. Determines temperature (to 1,000°C), draught/pressure (±40hPa), oxygen (21%), carbon monoxide (10,000ppm) and nitric oxide NO (3,000ppm) concentrations. Calculates carbon dioxide concentration, efficiency and flue gas loss. Threshold-protection of sensors, with 5X autodilution of CO to 50,000ppm. Separate sensor-socket with mini-probe for ambient temperature, and connection points for compatible differential-pressure devices. Built-in condensate-trap with warning and auto-switch-off. Internal memory (100 folders X 10 locations X 200 datasets each) for storage of measurement-protocols and data for printout. Supplied as kit with 335mm probe, cone and shield-plate, cordless printer and power supply. Rechargeable or AC operation (alkaline batteries used by printer).

Testo 350XL Portable Flue Gas AnalyserTES,350XL (5917) AU

Measures O2, CO, CO2 (measured by NDIR), NO, NO2 and SO2 concentrations plus draught, temperature, excess air, and gross/net efficiency values. Ranges: O2 0~25% vol, CO2 0~50%vol, CO with H2 compensation 0~10,000ppm with measuring-range extension and selectable dilution factor, NO 0~3,000ppm, NO2 0~500ppm, SO2 0~5,000ppm, draught 50hPa, temperature -40~1,000°C. Includes switch-off and rinse function for CO cell and fresh air rinse for longer term measurements. Internal memory for 250,000 readings, with RS232C interface and software provided. Operation from mains or rechargeable battery.

Visit http://www.youtube.com/techrentals for a variety of useful videos on the Panametrics range and much more!

Gas Flow Troubleshooting

TechRentals rented out a Panametrics PT878GC to a customerintending to audit compressed air flow at their facility. The set up involved 50 mm metal pipe with a known pressure of 7 bar. The customer reported intermittent results and errors when implementing tests, and requested assistance.

The PT878GC employs the transit-time principle for data collection. This unobtrusive method of measurement means there is no obstruction to internal flow, and no need to physically alter pipes to gain access.

TechRentals team member Graeme Murphy went out on-site to inspect the set-up. The customer appeared to have installed the apparatuscorrectly, with proper damping where the transducers were applied to the pipe, and along the pipe itself, extending out past where the bracket was mounted.

Damping with either mats or tape is crucial with ultrasonic signal testing; particularly with metal piping. An echo like phenomenon known as pipe signals can create interference and compromise any return signal readings at the transducers.

Graeme further investigated by implementing proper test procedure and viewing the results. Errors were indeed frequent, and only intermittent performance was attainable. A physical inspection of the unit mounting and pipes then followed, and it was discovered that when touching a small strip of metal used for spacing of the pipe in question to an adjacent pipe, a steady reading was possible. This implied that the pipe was not properly deadened although the damping appeared to be more than sufficient.

It was determined that the connector would be damped and the entire apparatus would be mounted further away from the connector. Running the test protocol with the new set up yielded steady, error free results, and the customer was able to successfully audit the compressed air flow in the pipe.

In the Field with the GE Panametrics TransPort PT878GC Ultrasonic Gas Flow Meter

Read the full article

Before AfterConnector causing interference

RelocatedApparatus

Extra Damping

1800 632 652

52

Physical Measurement www.techrentals.com.au

Material Hardness TestersNon-Destructive TestingPosition TransducersInclinometersForce GaugesLoad CellsVibration AnalysisSpeed Measurement

Material Hardness Testers

Non-Destructive Testing cont’d.

Non-Destructive Testing

GE DynaMic Rebound Hardness TesterGE,DYNAMIC (4936) AU

Rebound hardness tester tests to ASTM A956 and DIN 50156. Will compensate for changes in testing direction. Provides readings in HV, HB, HRC, HRB, HS, HL & M/mm2.

Krautkramer DynaPocket Rebound Hardness TesterKRA,DYNAPOCKET (4932) AU

Based on the Leeb’s method HL, utilising a 3mm tungsten carbide ball. Other hardness scales can be selected, HS Shore, HB Brinell, HRB Rockwell B, HRC Rockwell C, HV Vickers and N/mm2 tensile strength. Choice of 9 material groups can be selected, they are St Low-alloy/unalloyed steel and cast steel, ASt Tool steel, SSt Corrosion resistant steel, GCI Gray cast iron, NCI Nodular graphite cast iron, AL Aluminium cast alloys, brS Brass, brZ Bronze, Cu Wrought copper alloys.

Defelsko 6000 Ferrous & Non Ferrous Coating Thickness TesterDEF,POS-6000 (4870) AU/MY

Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standards and carry pouch. Measurement range 0 to 1500µm or 0 to 60 mils (selectable). Tolerance ±1µm +1% of reading 0-50µm, ±2µm +1% greater than 50um. Resolution 0.1µm. Backglow display, HiLo limits audible & visible alerts when measurements exceed specified limits. Continually displays updates average, standard deviation, min/max thickness and number of readings while measuring. Built in USB, Bluetooth and Wifi for downloading readings.

PosiTector 200 B & C Ultrasonic Coating Thickness GaugeDEF,POS-200ADV (4880) AU

Ultrasonic coating thickness gauge with type B & C Probes. Measures coating thickness over wood, concrete, plastics, composites etc. Will measure up to 3 individual layer thickness in a multi-layer system and features a graphic readout. Supplied with both B, 13 to 1000µm for wood, plastic and composites and C probes 50 to 3800µm for coatings on concrete, fibreglass etc. Accuracy is ±2µm +3% of reading.

Defelsko Positest Pull Off Adhesion Tester for Concrete & MetalDEF,POSITEST (4895) AU

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624.

Det-tronics W8066 Ultraviolet Test LampDET,W8066 (4860) AUPortable, battery operated source of UV radiation. Used to test UV flame detection systems. A fire is simulated by the intrinsically safe device by producing a beam of UV radiation. This beam has the same wavelength as the response range of Det-tronics UV Detectors. Enables the operator to verify the proper system operation without the need for an open flame. Comparable with a common flashlight, making it easier to handle and operate than other test lamps.

Olympus Epoch 600 Flaw DetectorOLY,EPOCH600 (4900) AU/MY

General purpose ultasonic flaw detector. Includes UT angle beam transducers 45, 60 & 70º, and Atlas dual element transducer. Stores images and data to micro SD card.

Olympus Ultrasonic Thickness GaugeOLY,27MG (4910) AU

Range 1~500mm, fast min mode. Resolution 0.01mm. Probe operates -20~150ºC.

Olympus 26mg Pocket Thickness GaugePAN,26MG MY

Range 1 to 500mm, fast min mode. Resolution 0.01mm. Probe operates -20 to 150ºC.

Olympus Ultrasonic Thickness GaugeOLY,38DL (4905) AU

Operates with dual and single element transducers, has colour transflective VGA screen. Includes datalogging capability. Does echo to echo measurements. Supplied with transducers to measure steel, cast, corroded steel, rubber, fibreglass and composites. Includes D7906-SM, M1036, M2008 M109-RM (inc delay line M202-RM) transducers.

Olympus Ultrasonic Probe for OLY,38DL & OLY,27MG

PCWI 30kVDC Porosity (Holiday) Detector

OLY,D790-SM (4909) AU

PCW,DC30 (4885) AU

Ultrasonic high temperature probe for OLY,27MG and OLY,38DL 5MHz 7.9mm tip diameter. Operating temperature range -20ºC~500ºC.

DC Porosity (Holiday) detector. Detects pinholes in coatings above 150μm on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit LCD display with battery indicator, display of voltage level. Alarm indicated on front panel, supplied with rechargeable battery, 10h charger, probe handle with neon and 2m length cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension. Dry conditions.

Olympus Australia www.olympus-ims.com

Olympusultrasound | phased array | eddy current | eddy current array | remote visual inspection

Olympus designs, manufactures, and globally markets a range of innovative nondestructive testing, remote visual inspection instruments developed with a commitment to technology, design, and user friendliness. These products are used for inspection and maintenance in industrial and research fields ranging from aerospace and energy to transportation and manufacturing. Olympus instruments contribute to product quality and add to the safety of infrastructure and facilities.Olympus has earned industry-wide reputations for providing cost-effective solutions and

excellent support and customer service.

Technologies

Ultrasound

Eddy Current

Remote Visual Inspection Microscopy

Ultrasound Phased Array

Eddy Current Array

SolutionsCorrosion TestingWeld InspectionSecurityFlaw DetectionThickness MeasurementsAutomated Testing

Image Capture X-ray Fluorescence/DiffractionMaterial Identification

54

Physical Measurement www.techrentals.com.au

Non-Destructive Testing cont’d. Force Gauges cont’d.

Load Cells

Vibration Analysis

Position Transducers

Force Gauges

Inclinometers

PCWI 40kV Pulse Porosity (Holiday) DetectorPCW,P40-PULSE (4890) AU

Pulse porosity (Holiday) detector. Detects pinholes in coatings and wrapping above 150µm on metal substrates such as pipes and tanks. Can be used on dry or wet surfaces. 0~40kV output, 4 digit LED display of voltage, alarm sensitivity setting between dry and wet. Supplied with rechargeable battery, 10h charger, red probe handle and 2m length of rubber coated cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension and 80mm probe extension.

MEL M5-200 4 to 20mA Optical Position TransducerMEL,M5-200 (5315) AU

Optical distance measurement device 4 to 20mA output. Will measure distance from 240mm to 440mm with an accuracy of 0.06mm. Does not require a reflector on the surface of the device. Light spot diameter is 10mm. Light sensor is IP67. 4 to 20mA transmitter is IP40. Will operate from 10 to 30V. Relay outputs indicate error condition. 1ms, 2ms or 20ms adjustable reaction time. Light source infrared 890nm invisible.

Gloi ALiSensor Level and Flatness SystemGLO,ALISENSOR (5325) AU

Precision level system including an iPad with applications for Straighness, Squareness, Flatness, Spindle Parallelism, Spindal Perpendicularity, Shaft Level and Shaft Plumb. Angle can be measured to 0.001º and flatness can be determined to 0.0025mm. Includes a magnetic fixture.

Hiliti Fastener Test System includes SafeRIngs SystemsHIL,HAT28M (4465) AU

A purpose-made system for testing fastenings. It consists of a mechanical screw arrangement acting through a hydraulic load cell which measures the load applied to the fastener directly.

Hilti Safety Bolt Inspection SystemHIL,TESTER4 (4460) AU

Inspection system to test safety bolts (Safe Ring Bolts) on the exterior of buildings. The instrument will check the bolts to AS1891.4-2000 Industrial fall arrest systems and devices. Part 4: Selection, Use & Maintenance or to AS4488.2-1997 Industrial rope access systems Part 2: Selection, Use & Maintenance. These tests need to be performed on a yearly basis on exterior connection points on building. These safe ring connection points will typically be used to suspend window cleaning harness systems.

Mecmesin AFG-1000NALC Digital Force GaugeMEC,AFG-1000NALC (4428) AU

Range 0 to 1,000N accuracy 0.1%. 5 digit back lit display. Peak data sampling rate 5kHz. 120% overload warning, display invert (reverse) function, dual max, max tension & max compression plus current reading. Outputs: analogue, RS232 & Mitutoyo. Accessories: test hook, compression plate, 130mm & 30mm extension rods, rotary coupling. Mounting tapped holes x 2, M5 x 0.8 x 5.5mm deep max. Optional smart sensors can be used, such as TW60 static torque wrench.

Futek IHH500 Pancake Load Cell 2T CapacityFUT,IHH500-2T (4416) AU

TheIHH500 display & LCF500-FSH02968 loadcell operate at up to 20 tonnes (50,000lb) in compression and tension. The IHH500 handheld display is a logging microcontroller which can store up to 21000 points, it is powered by a rechargeable battery which can last for up to 30 hours depending on battery condition and load. It will operate from its mains charger if needed. The system has a simple ‘Tare’ function and can display ‘Max Hold’ using a single front panel key. The lead that connects the loadcell to the display is 1.6 Meters long. The load is connected via M33x2-Threads. There are two eye bolts supplied with the system, however the eye bolt capacity is 7 ton. The software is supplied on a USB flash drive/dongle.

Futek IHH500 Pancake Load Cell 20T CapacityFUT,IHH500-20T (4418) AU

The IHH500 Display & LCF500-FSH02968 loadcell operate at up to 20 tonnes (50,000lb) in compression and tension. The IHH500 hand held display is a logging microcontroller which can store up to 21,000 points, it is powered by a rechargeable battery which can last for up to 30 hours depending on battery condition and load. It will operate from its mains charger if needed. Has a simple ‘Tare’ function and can display ‘Max Hold’ using a single front panel key. The lead that connects the loadcell to the display is 1.6 Meters long. The load is connected via M33x2-Threads. There are two eye bolts supplied with the system, however the eye bolt capacity is 7 ton. The software is supplied on a USB flash drive/dongle.

See also Noise & Sound Analysers on page 67-68

Fluke 810 Vibration TesterFLU,810 (5050) AU/MY

Tests rotating machinery to determine the status of gearing wear etc. Used to: Troubleshoot equipment and understand cause of failure. Commission new equipment and ensure proper installation. Includes triaxial accelerometer and laser tacho. Store and reports FFT images to your PC. Very simple output that reports Pass and Fail on machinery condition.

GCDC High Impact USB Accelerometer Data Logger X500-2

GCD,X500-2 AU

USB impact accelerometer provides 3 axis 512Hz sampling. Built in 2G micro SD card. 500g sensors

Is your major project? • Telecommunication • Construction

• Road or Rail Infrastructure• Power Generation

• National Broadband Network• Port Infrastructure

With over 40 years experience, TechRentals’ technical experts will assist you in delivering the right test and measurement solution for your major project. Whatever the duration, the best solution will be tailored to your requirements, making this part of your project simple and easy.

TechRentals offer equipment for electrical power measurement and analysis, general industrial applications, physical measurement, radio frequency, environmental and OH&S, data and telecommunications, electronics, and more.

Through TR Hirecom, TR Telecom, and TR Calibration, the product range broadens to include two way radios, satellite telephony products, and instrument calibration services.

With access to our vast Australia-wide business network and global partners’ inventories, you can be assured we will deliver the best solution for you.

Major Projects

techrentals hirecom telecomYour trusted partner in technology. Offering innovative solutions through our leading brands:

M e l b o u r n e • S y d n e y • N e w c a s t l e • B r i s b a n e • T o w n s v i l l e • A d e l a i d e • D a r w i n • P e r t h

56

Physical Measurement www.techrentals.com.au

Vibration Analysis cont’d. Vibration Analysis cont’d.

Speed Measurement

GTI Spindle Vibration Analyzer and Balancing SystemGTI,IPAD3VAB (5040) AU

This system is based around an iPad. Measurement range ±196m/s2, frequency range 1.6 to 10kHz. Includes accelerometer on a 3m lead with a magnetic base and an optical position sensor. Measures Acceleration or Velocity giving a 0~20kHz FFT display.

Profound Vibra Ground Vibration LoggerPRO,VIBRA (5023) AU/MY

Designed for long term ground vibration logging. Includes a Geophone and remote alarm with flashing light. Velocity Range 0 to 100mm/s. 4 weeks operation on 3 x D cell batteries. USB interface. Download possible while measuring. Full Windows analysis software included. IP65 case. Meets standards for ‘Vibration in buildings’ - Effects on structures’ and ‘Effects on persons in buildings.

Profound Vibra Plus Ground Vibration LoggerPRO,VIBRA-PLUS (5023) AU

Designed for long term ground vibration logging. Includes a Geophone and remote alarm with flashing light. Velocity Range 0~100mm/s. 4 weeks operation on 3xD cell batteries. IP65 case. The Plus model provides dominant frequency information and includes a Modem so alarm messages can be emailed and sent via SMS, and a daily report can be emailed.

Rion VA-11 Vibration AnalyserRIO,VA-11 MY

Includes 2 pickup types hand held (PV55) and magnetic type (PV57). Measures acceleration, velocity and displacement. Displays RMS, peak and crest factor. Uses FFT to display power and vibration spectrum. Incorporates PCMCIA card flash memory for data storage. RS-232 interface available. PV57 1Hz to 5kHz, PV55 3Hz to 20kHz (velocity 3kHz, displacement 500Hz). Acceleration 0.02 to 316mm/s2 rms. Velocity 0.1 to 1,000mm/s rms. Displacement 0.003 to 28.3 (EQ PP). High pass filter 3Hz, 10Hz & 1kHz. Low pass 1kHz, 5kHz and 20 kHz. Stores 500 measurements.

Rion VA-12 Vibration AnalyserRIO,VA-12 (5040) AU/MY

Includes magnetic pickup type. Will store measurements. Measures acceleration, velocity and displacement and displays it in either time or frequency domain. It will display rms, peak and crest factor. Uses FFT to display power and vibration spectrum. Incorporates SD card memory storage.

Svantek SV100 Whole Body Vibration AnalysisSVA,SV100 (5005) AU

Completely self-contained, integrated unit. Does whole body vibration dose (exposure) measurements, octave measurements, time domain record measurements and motion sickness measurements. Includes external alarm, car power adapter or will run from battery pack for >16hrs. USB interface for programming and download.

TMS Portable Vibration Calibrator including Wobulator OptionTMS,9110D-WOB (5080) AU/MY

Portable calibrator will test accelerometers, velocity transducers and proximity probes. It can provide 7Hz to 10kHz vibrations. Maximum amplitude 20g (no load). Maximum payload 800gram. Includes an interface to most common accelerometers and a report generation capability.

TR Viblog Vibration and GPS LoggerTR,VIBLOG (5060) AU

Incorporates a 3D accelerometer, a 3D gyroscope and a 10Hz GPS system. Logs 10 measurements per second. Records these measurements and also provides a Google Earth plot of the horizontal vibration and vertical vibration by location. A histogram of the vibration against velocity is provided also. The loggers battery lasts around 24hrs. Has sufficient memory to record 10 samples per second over this time.

The TR Viblog Vibration and GPS Logger was the equipment used in the Vehicle Condition Monitoring article on the following page. You can watch a how-to

video on the TR Viblog or read the whitepaper Australian Railways’ Weakest Link via the QR codes below.

Read the white paper

Watch the video

Phantom 53550 Radar Gun with Case and Tuning ForkPHA,53550 (5324) AU

Doppler K band (24.150GHz) stationary radar gun. Pull the trigger and the speed display appears instantly. Invisible to all radar detectors. Power requirements 10.5 to 16.5VDC, 13.5VDC nominal, 1.5A max, external source, connection via 1.8m coiled power cord with fused lighter plug. Operating environment -20 to 60ºC, 90%RH @ 37ºC (non-condensing). Accuracy ±0.17kph. Accuracy verification tuning fork (K-Band), internal 90kph. Speed range 17 to 332kph.

Vehicle Counts PC2500 2 Channel Vehicle Volume & Speed CounterVEH,PC2500 (5320) AU

An automatic traffic counter used to collect vehicle traffic data on roadways. It collects data from one or two road tubes (rubber hose) stretched across the road. Can be used to collect data for traffic volume, vehicle classifications, and/or vehicle speeds.

TechRentals has developed a condition monitoring system to measure the lateral and vertical acceleration experienced by railway vehicles. This enables not only track problems to be identified but also enables the vehicle performance itself to be evaluated on a comparative basis. The system was developed particularly for railway use however the system has potential for use in any analogous transport system.

The system is based on a GPS system updated at a 10Hz rate with measurements provided by a triaxial accelerometer. The physical implementation is quite simple and all that is required is for the measurement apparatus to be placed in the vehicle for the duration of the journey. The data is transferred to a memory card with the output subsequently processed to create a unique output format that utilizes Google Earth data as a reference. This output format clearly shows track ab-normalities and also allows the responsible staff to compare the performance of different rail vehicles across the same section of track. The presentation is such that the concept and operation can be understood with the briefest of training.

The image in figure 1 shows a significant problem highlighted by the magnitude of the red and white line deviations. The red is the vertical and the white is the horizontal movement. The location of the problem is readily identified very accurately using GPS coordinates, etc.

In figure 2 we have a typical log which allows the magnitude of the movements to be easily determined together with the speed, etc. This shows a vertical acceleration of between 1.95g and .44g. The horizontal was -.2 to .3g horizontally at a speed of 124.5kph. The log is continuous allowing further analysis.

The instrument will also provide histograms that summarize the horizontal and vertical vibration performance of the vehicle for different speeds. This enables different vehicles to be compared across the same piece of track.

The system allows extensive routine measurements to be taken without the use of specialised measurement vehicles at the actual service speeds using standard vehicles. There is no disturbance to normal track operation. Apart from passenger service customer comfort there are savings by minimising track damage and establishing optimum vehicle speeds.

There is the potential to investigate a relationship between vehicle design or adjustment, freight loads, and speed with a view to gaining the maximum long term handling capacity from existing track. The cost savings from such an investigation can be substantial.

Vehicle Condition Monitoring SystemHow to reduce track damage and derailment risk

Figure 1

Figure 2

58

Construction www.techrentals.com.au

Air Conditioning & Air FlowAir Conditioner Valve BalancingConcrete Testing EquipmentUnderground Services LocationUtility Leak DetectionPipeline & Cavity InspectionDistance Measurement & Surveying

Air Conditioning & Air Flow

Airflow 36 Pitot Tube

Alnor EBT-721-A3 Electronic Micromanometer

AIR,PITOT-36 (5816) AU

ALN,EBT-721-A3 MY

Pitot tube (36”) for use with manometers and micro manometers.

Detachable multi-purpose digital manometer that can be used with the following test and balance tools, such as pitot, air foil, temperature, relative humidity probes or a 16-point velocity matrix. Differential pressure: ±15 in. H2O, (3735 Pa) 150 in. H2O maximum safe operating pressure. Absolute pressure: 15 to 40 in. Hg (356 to 1016 Hg). Velocity: 25 to 8,000 ft/min (0.125 to 40 m/s) pitot probes; 25 to 5,000 ft/min (0.125 to 25 m/s) air flow probe; 25 to 2,500 ft/min (0.125 to 12.5 m/s) velocity matrix. Volume: 25 to 2,500 ft3/m (42 to 4250 m3/h) capture hood. RH: 0 to 95% RH (optional probe), Temperature: -40 to 250°F (-40 to 121°C) probe dependant. Standard comes with 2ft x 2ft, upon request additional hood of 2ft x 4ft and 1ft x 4ft hood would be provided.

Alnor EBT731 Balometer Electronic Balancing ToolALN,EBT-731 MY

Features a detachable multi-purpose digital manometer that can be used with the following test and balance tools, such as pitot, static pressure probe or a 16-point velocity matrix. Volume Range: 25 to 2,500 ft cube/min (42 to 4250 m cube/h) with capture hood. Velocity Range:25 to 2,500 ft/min (0.125 to 12.5 m/s) with velocity matrix. Unit comes with 2ft x 2ft,2ft x 4ft and 1ft x 4ft hoods.

CSS Portable Smoke Generating MachineCSS,COLT4 (5890) AU

Portable smoke generator with variable smoke emission rate. Suitable for air flow visualisation, HVAC ductwork leak-testing, fire training and general work. Pump-free operation with smoke fluid supplied from consumable aerosol cans. Manual or continuous operation and off-power facility. Maximum output 31 cubic meters/min at 1.5m visibility. Operation for 18min from one can at maximum capacity.

Druck DP1705 Manometer 0 to 20kPaDRU,DPI705 (5808) AU

Handheld digital manometer range 0 to 20kPa, accuracy 0.2%. Displays all common engineering units.

Druck DPI705-IS Manometer 0 to 20kPa Intrinsically SafeDRU,DPI705-IS (5809) AU

Hand held Manometer 0 to 20kPa range. Accuracy 0.2%. Displays all common engineering units Intrinsically Safe.

Air Conditioning & Air Flow cont’d.

Druck DP1705 Pressure gauge 7 Bar ABSDRU,DPI705-7BARA (5810) AUHandheld digital pressure gauge range 0~7bar absolute, with remote sensor, accuracy 0.1%. Displays all common engineering units.

Oriflow Cobra Duct Leakage Tester to AS4254.2

Testo 417 100mm Vane Anemometer

Testo 420 Air Balancing Flow Hood System

ORI,COBRA (5820) AU

TES,417 (5839) AU

TES,420 (5825) AU

Duct leakage tester complete with 25, 50, 75, 100mm orifice plates and calibration certificates. Includes 3.8m of 125mm flex duct, 1hp 240VAC, 50Hz blower, 6m of vinyl pressure tubing, digital gauges on a fully portable wheeled, powder coated cart incorporating a variable speed drive. This unit is fully compliant with the latest EN1507, EN12237, Eurovent 2/2, DW/143, SMACNA and AS4254.2-2012 standards.

Vane anemometer 100mm head. Display velocity and temperature. Has averaging function to measure ducts. 0.3~20m/sec ±(0.1m/s + 1.5% mv) Temperature 0~50ºC ±(0.5ºC). 50Hr battery life.

Includes 610x610, 360x360, 305x1220, 610 x 1220 hoods and stand and 500mm pitot tube. Measures 40~4000m 3 /hr ±3%, Temperature 0~70°C ±0.5°C -20~0°C ±0.8°C, 0~100%RH ±1.8%+3%Rdg, Differential Pressure 0~120Pa ±2%Rdg+.05Pa. Kit includes a stand and an Android or iPhone app can be downloaded for one man remote operation. Kit includes 500mm pitot tube.

Testo 445 Vane Anemometer with 16mm VaneTES,445 (5842) AU

Micro-vane probe. Simultaneous digital display of air velocity and temperature, with continuous-update, max, min & mean functions. Volume-flow option with entry of duct dimensions. Telescope mounted metal probe, vane 16mmØ. Operating range 0.4 to 60m/s, accuracy ±0.2 m/s, ±1%mv up to 40m/s. Temperature range -30 to 140ºC for short-term measurements. Selectable site-locations, and 3,000 point internal memory for manual saving or automatic data logging. Battery powered.

TSI VelociCalc 100mm Vane Anemometer with Volume DisplayTSI,8324 MY

Vane anemometer with 100mm head, supplied with handle and 900mm articulated telescopic extension. Velocity measurement range 0.25 to 30m/s ±1%; temperature measurement range 0 to 80ºC ±0.5ºC. Volume display range 0 to 4.36 x 106m3/h with input for circular or rectangular duct dimensions. Variable time-constant; sample statistics average, max and min; and “sweep” mode for extended continuous sampling. Internal memory for single point measurements or time-based data logging, for up to 2849 samples and 1,000 test IDs, with serial interface, cable and software for data download. Direct data acquisition [polling] from PC terminal modes. Battery powered with auto-power-off, and optional AC adaptor.

59

Construction

Air Conditioning & Air Flow cont’d. Air Conditioning & Air Flow cont’d.

Air Conditioner Valve Balancing

TSI 8375 Accubalance Modular Air Balancing ToolTSI,8375 (5827) AU

Balometer with detachable micromanometer (TSI 8710) for air balancing applications. With 610 x 610mm air capture hood for measurements in the range 42 to 4250m3/h with automatic compensation for barometric pressure and air temperature, 45cm pitot probe [range 0.13 to 41m/s], 16-point velocity matrix probe [0.13-13m/s] and static pressure probes [differential pressure range ±3735Pa with safe limit 37kPa, absolute pressure range 47 to 135kPa. Accuracy typically 2% for pressure, 3% for flow. Large, multi-line backlit LCD display for single or statistical readings with min, max and average of up to 1,000 values of each measured parameter. Manual result storage or automatic data logging up to 1,000 time/date stamped readings. RS232 port for data transfer to PC or serial printer, with cable and “LogDat” download software. Rechargeable with approx 12h operation, or AC adaptor.

TSI 8380 Balometer & Hood KitsTSI,8380 (5826) AU

Includes 8715 manometer and logging capability. Includes 610 x 610, 305 x 1220, 610 x 1220, 305 x 1525 and 915 x 915 hoods.

TSI 8386A VelociCalc Air Conditioning Efficiency MeterTSI,8386A MY

Portable efficiency measurement system for HVAC and related work, with hot wire anemometer, static and differential pressure, temperature and humidity measurement with heat flow efficiency calculation. Velocity (hot wire) 0 to 50m/s, accuracy ±3%. Temperature -10 to 60°C, accuracy ±0.3. Wet bulb temperature 5 to 60°C. Relative humidity 0 to 95%RH, accuracy ±3%. Dewpoint -15 to 49°C. Static/differential pressure -1,245 to 3,735Pa, accuracy ±1%. Probe length 100cm, tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated.

TSI 8710 DP-CALC Differential Micro-ManometerTSI,8710 (5813) AU

Micro-manometer for static or differential pressure, velocity, volumetric flow, atmospheric pressure and temperature. With statistical analysis, density correction, K factor and automatic actual/standard flow calculation. Differential pressure range ±3735Pa. Velocity display to 41m/s (range depends on probe). Supplied with static tip, pitot tube, velocity matrix and temperature probe. Datalogging (1,000 point) with RS232C interface and software. Rechargeable cells or AC adaptor.

TSI 9535 Anemometer with Logging CapabilityTSI,9535 (5845) AU

Includes data captured download software and USB cable. Logs velocity and temperature. Will calculate flow rates. 0 to 30m/s Accuracy 3% of reading or ±015m/sec whichever is greater. Temperature range -18 to 93°C ±0.3°C. Runs 4 x AA batteries.

TSI 9555 Multi-Function Ventilation MeterTSI,9555 MY

Portable, hand held, multi-function ventilation meter. Comes with differential pressure and 966 articulate probe which measures air velocity, temperature and humidity. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature. Velocity measurement: Range: 0 to 9,999 ft/min (0 to 50 m/s), Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s), Resolution: 1 ft/min (0.01 m/s). Temperature measurement: Range: 14 to 140°F (-10 to 60°C), Accuracy: ±0.5°F (±0.3°C), Resolution: 0.1°F (0.1°C). Humidity measurement: Range: 0 to 95% RH, Accuracy: ±3% RH, Resolution: 0.1% RH.

TSI TA465A Multi-Function Ventilation MeterTSI,TA465A MY

Portable, hand held, Multi-Function Ventilation Test Instruments. It comes with differential pressure. It also comes with the 966 articulate probe which measures air velocity, temperature and humidity. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature. Velocity Measurement Range: 0 to 9,999 ft/min (0 to 50 m/s) Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s) Resolution: 1 ft/min (0.01 m/s) Temperature Measurement Range: 14 to 140°F (-10 to 60°C) Accuracy: ±0.5°F (±0.3°C) Resolution: 0.1°F (0.1°C) Humidity Measurement Range: 0 to 95% RH Accuracy: ±3% RH Resolution: 0.1% RH.

TSI 9565A VelociCalc Air Conditioning Efficiency MeterTSI,9565A (5849) AU

Portable efficiency measurement system for HVAC and related work, with hot wire anemometer, static and differential pressure, temperature and humidity measurement with heat flow efficiency calculation. Velocity (hot wire) 0 to 50m/s, accuracy ±3%. Temperature -10 to 60°C, accuracy ±0.3. Wet bulb temperature 5 to 60°C. Relative humidity 0~95%RH, accuracy ±3%. Dewpoint -15 to 49°C. Static/differential pressure -3,735 to 3,735Pa, accuracy ±1%. Probe length 1m, tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated. USB & Bluetooth download.

See also Data Loggers: Testo Temperature & Humidity Loggers on page 49

Tour & Anderson Scope Balancing Meter 1000kpaTA,CBI MY

Digital pressure balancing instrument with LCD display. For cooling water valve balancing in air conditioning plants and similar applications. Firmware revision 3A. Includes facility for entry of Kv value to allow balancing of all hydronic valve types. Differential pressure range -0.5 to 20.5m water gauge at a total pressure of less than 200m. Resolution 0.001m. Flow resolution 0.001l/s. Battery operated.

Tour & Anderson Scope Balancing Meter 1000kpaTA,SCOPE (5801) AU

Digital flow balancing instrument with color display. For cooling water valve balancing in air conditioning plants and similar applications. Includes facility for entry of Kv value to allow balancing of all hydronic valve types. Differential pressure range -0.5 to 20.5m water gauge at a total pressure of less than 200m. Resolution 0.001m. Flow resolution 0.001l/s. Battery operated.

Learning to operate unfamiliar equipment costs you time and can lead to errors. Save time and reduce your real costs. Read about our Configuration and Download solution on page 23

1800 632 652

60

Construction www.techrentals.com.au

Elcometer 331-B Basic Cover MeterELC,331-B (4924) AU/MY

Displays depth and orientation of the reo bars. Deep search head supplied. 40mm diameter bar depth 35 to 180mm depth, 8mm diameter bar depth 25 to 160mm depth. Rechargeable battery allows 32h of continuous operation (20h with backlight).

See also Endoscopes, Borescopes & Visual Inspection on page 40See also Pipeline & Cavity Inspection on page 62

Concrete Testing Equipment Concrete Testing Equipment cont’d.

Underground Services Location

Elcometer 331-SH Cover Meter with Half Cell MeasurementELC,331-SH (4919) AU

Displays the depth and orientation of the reo bars. Standard search head. 40mm diameter bar depth 15 to 95mm. 8mm diameter bard depth 8 to 70mm. Rechargeable battery allows 32h of continuous operation (20h with backlight). Autosizing of bars or orthogonal measuring of bar sizes. Internal storage of readings of depth of cover in batches which can be downloaded to PC with supplied software. XP and Vista supported.

Hilti PS200 Ferroscan SystemHIL,PS200 FERROSCAN (4920) AU

Portable, quick and easy to use for detecting rebar and other ferrous objects in concrete structures. Provides accurate on-site rebar location, depth and diameter with the PS 200M monitor. Scans can be evaluated on the monitor or transferred to a PC or laptop for further evaluation and report generation. Portable wireless operation, easy integrated LCD display makes setting up the scan easy while providing information over the scan process. Fast data download via infra red beam from scanner to monitor. Convenient Scanner stores up to 9 image scans and 30m of Quickscans.

Hilti PS250 Ferroscan SystemHIL,PS250 (4921) AU

Portable, quick and easy to use for detecting rebar and other ferrous objects in concrete structures. Provides accurate on-site rebar location, depth and diameter with the PSA100 monitor. Scans can be evaluated on the monitor or transferred to a PC or laptop for further evaluation and report generation. Portable wireless operation, easy integrated LCD display makes setting up the scan easy while providing information over the scan process. Fast data download via infra red beam from scanner to monitor. Convenient Scanner stores up to 9 image scans and 30m of Quickscans.

Hilti PS1000 X-scan Concrete GPR SystemHIL,PS1000 (4922) AU

A GPR system with 3 transmitters and 5 receivers that has been designed to provide a 3D image of the location of reinforcement bars and other metallic and non-metallic objects in concrete. Accuracy ±10mm. It will measure to a depth of 300mm.

Proceq 2000-ND Digi Schmidt Test HammerPRO,2000-ND (4930) AU

Concrete hardness tester (Schmidt hammer). Supplied complete with inbuilt graphical LCD for setting up and graphical display of results, up to 500 results can be stored. RS232 interface and software supplied for down loading. Impact energy 2.207Nm. Engineering units of results in N/mm2, MPa, psi, kg/cm2. For concrete thickness greater than 100mm.

Proceq Profoscope Rebar Locator & Cover MeterPRO,PROFOSCOPE (4926) AU

Rebar locator and covermeter. Short range measurements to 95mm. +/-3mm accuracy. Long range 185mm accuracy +/-4mm. The unit will determine the position of the rebars, the mid point between rebars, Concrete cover, estimation of bar diameter & the orientation of the rebar. Powered by 2 x AA batteries. Battery life 15h with backlight 55h without.

Proceq Resistivity MeterPRO,RESIPOD (4925) AU

Can determine the likelihood of corrosion and the corrosion rate in concrete. 0 to 1,000kΩ measurement range. USB interface, USB charging. Waterproof.

Proceq SilverSchmidt UN Concrete Test HammerPRO,SIL-UN (4928) AU

Requires no corrections for angle of test, simple one button operation, datalogging capability with USB download with detailed reporting capability. Impact Energy 2.207Nm. Compressive strength range 10~170MPa. Battery Life >1000 Impacts before recharging is required.

Proceq PL-200PE Ultrasonic Concrete Test SystemPRO,PL-200E (4927) AU

Can determine depth of perpendicular cracks, slab thickness from a single side and it can also locate and measure voids, pipes, cracks parallel to the surface. It will estimate the ‘internal’ compressive strength of the concrete.

Protimeter Moisture Measurement SystemPRO,MMS-PLUS (4955) AU

Moisture meter for detection of moisture in non conductive solid materials such as wood and masonry. Two measurement modes, search for qualitative measurements and measure mode for precise and localised moisture content. Supplied with pin type probes, deep wall probes, hygrometer probe and extension cord for RH, ambient temperature or dew point temperature. Hygrostick probe supplied for surface temperature measurement. Logging software and RS232 computer interface supplied.

See also Cable & Pipe Tracers & Fault Locators on page 24

C.Scope DXL2 & SGV2 Cable and Pipe LocatorCSC,DXL2-SGV2 (3720) AU

Cable and pipe avoidance and location tool with depth measurement. Simultaneous dual 33+131kHz frequency will assist in the detection of smaller buried pipes and cables such as telecoms, cast iron and street lighting spurs. 4 level power adjust up to 1W and depth detection to 3m (depending on soil type). Four detection modes; Power, Radio, Generator and Allscan. Features a Dynamic Swing Sensor to aid in cable and pipe location.

61

Construction

Underground Services Location cont’d. Utility Leak Detection

Vivax VLOCPRO2 Pipe & Cable Location SystemVIV,VLOCPRO2 MY

Pipe and cable locator with intuitive menu system, colour display, peak, null, left/right and orientation (compass) response to support your preference. Configured with 6 location frequencies, power and radio modes. 10 W transmitter can apply the location signal by connection, induction and signal clamp. Depth detection up to 6 to 9 m in broad-peak mode.

Vivax VLOCPRO Pipe & Cable Location SystemVIV,VLOCPRO (3740) AU

Pipe and Cable locator with intuitive menu system, colour display, peak, null, left/right and orientation (compass) response to support your preference. Configured with 6 location frequencies, power and radio modes. 10W transmitter can apply the location signal by connection, induction or signal clamp. Depth detection up to 6 to 9 meters in broad-peak mode.

UE Systems UP3000 Digital Ultrasonic Leak Detector UES,UP3000 (3810) AU

Displays dB levels. Readings can be stored and downloaded. A tone generator is supplied together with a stethoscope probe and a rubber focusing probe. Interface software to download readings is also supplied.

Remote Concrete Pour Temperature Sensing and Sample Control Using Modbus

TechRentals have developed a simple solution for the monitoring of the concrete curing process that also provides ‘matched temperature’ control of the concrete pour samples. The benefits include a more accurate estimation of concrete strength and potential shortening of the period before additional construction can commence.

An application of the Modbus protocol has enabled the efficient implementation of concrete pour temperature remote monitoring and also control of the storage environment of concrete test. The system is sufficiently undemanding in installation for it to be supplied as a rental system however many users would find it practical to have it as a standard tool.

A dataTaker model DT80M logger is used to gather 30 channels of thermocouple data at the concrete pour and the data is linked to a second DT80M at a remote office location. The site data is monitored for obvious errors and faulty thermocouple data is automatically rejected. The office logger controls a thermal bath and maintains this as an accurate analogue of the site concrete pour temperature. Site samples are placed in the bath and thereby are maintained in closely matched conditions to those in the construction. The samples can therefore be subjected to mechanical testing with a high degree of confidence. This together with the precise monitoring of the site curing process considerably increases the confidence in the state of the concrete. This allows for earlier formwork striking times with an earlier start to prestressing and consequently significant savings. This system is simple to implement with the baths currently in use.

The first implementation of the system was in a remote location in Queensland.

The dataTaker data loggers and associated hardware are available from TechRentals who also wrote the associated software. TechRentals sales engineers are always ready to offer advice on any aspect of test and measurement instrumentation selection and use.

1800 632 652

62

Construction www.techrentals.com.au

Pipeline & Cavity Inspection Pipeline & Cavity Inspection cont’d.

Distance Measurement & Surveying

See also Endoscopes, Borescopes & Visual Inspection on page 40

Aqua Snakeeye Video Inspection SystemAQU,SNAKEEYE3 (5145) AU

Handheld video system. For remote inspection work. It is very light and compact. Includes a 12.7cm TFT-LCD display and 3cm diameter camera including illumination. Various adapters are supplied for mounting the camera to:a) your hand,b) a 45.7cm arm with 90 degree articulation,c) a 9 m extension cable ord) an arm which extends from 1.6 to 3.6m. Includes memory card and will save images to card.

GE Everest Ca-Zoom

Vivax vCam-5 Pipeline Camera Inspection System 60 meters

GE Everest PTZ-70 Camera Head

GE Everest PTZ-140 Camera Head

GE,EVEREST CA-ZOOM (5131) AU

VIV,VCAM5-60M (5134) AU

GE,EVEREST PTZ-70 (5130) AU

GE,EVEREST PTZ-140 (5129) AU

Ca-Zoom and hand-held controller is a portable, case-mounted, camera controller with real-time, multitasking software operating system which supports file storage on 64MB of internal flash memory and CompactFlash removable storage media. Provides for integrated image capture and full motion video recording capabilities, on-board file manager and annotation. Includes connectors for camera, handheld controller, video input/output, USB streaming, and keyboard for text generation. Supplied with 30m camera head cable and extension pole 1.8 to 3.6m. Camera heads must be chosen separately, see model GE,EVEREST PT-70 and GE,EVEREST PTZ-140.

Vivax 60 meter pipeline inspection system with self-levelling camera D34 (without camera skid diameter is 34mm, with skid it’s 44mm). The push rod has a 512Hz/640Hz sonde which can be located by the ‘VM-540 Camera and Sonde Locator’ supplied. The push rod can also become a Tracer Rod with the connection of a utility locator transmitter (not supplied) to energize the entire rod length. Records video(AVI) and still images direct to HDD, USB or SD card. The vCam-5 has a 4x digital zoom and includes a full text writer with the ability to change font and background colors, internal/external voice-over, built-in rechargeable battery, camera test port, and Wi-Fi interface. Camera submersion depth up to 11 bar/110m.

70mm in diameter (fits through a 76mm opening) and features 10x optical zoom and 4x digital zoom for a total of 40x zoom. Eight 5-watt LED lights with variable intensity control, 360°continuous pan direction and 270°tilt capability. Waterproof to 45m or 4.5 bar (65 psi). Requires the GE,EVEREST CA-ZOOM to operate.

140mm diameter colour camera module (fits through a 140mm opening) and features a 360°pan, 234° tilt, 36x optical and 12x digital zoom, high-intensity lighting and waterproof packaging to 45m or 4.5 bar (65 psi). Requires the GE,EVEREST CA-ZOOM to operate.

Wohler VIS2000Pro 30m Colour Camera & Roller GuideWOH,VIS2000PRO (5149) AU

Suitable for inspection of ventilation ducts, chimneys, chambers and flue gas systems, etc. Kit consists of colour display with a joystick to control camera. 30m push rod cable on a reel, with a non-waterproof, splash resistant (IP64 rated) 51mm diameter colour camera with illumination. Accessories include a Roller Guide to allow the camera to be pushed down a pipe. Can save still images and video to a memory card. Video out function.

Wohler VIS340 Service Camera Visual Inspection System 30mWOH,VIS340-PT (5143) AUWOH,VIS340 MY

Compact colour video inspection system with 26mm forward facing and 40mm Pan Tilt colour cameras. Viewing angle 120 degree, waterproof according to IP68(3 bar-30m) and IP67(2 bar-20m) respectively. Bright white LEDs on 30m of flexible push rod with metric markings. Battery powered 7” high resolution colour screen with removable monitor and SD video recording. Applications incl damage analysis in water / drainage / sewer pipes, inspection of hollow spaces, ventilation, machines, control panels, exhaust systems and production surveillance.

Wohler VIS-350 Service Camera Visual Inspection System 30mWOH,VIS350-PT (5142) AU

30 meter compact colour video inspection system with 26mm forward facing and 40mm Pan/Tilt colour cameras. Waterproof according to IP 68 and IP 67 respectively. Adjustable illumination, camera orientation/gravity and degree of inclination display, 8.9kHz sonde in each camera detectable with the L-200 locator down to approximately 1.5 meters (depending on soil type). Memory storage 1 hr/Gb. Applications include damage analysis in water/drainage/sewer pipes, inspection of hollow spaces, ventilation, machines, control panels, exhaust systems and production surveillance.

See also Light Meters, UVA/B/C Measurement on page 69

ikeGPS Precision GPS and Laser Distance and Camera SystemIKE,300PRO (5301) AU

Intergrated precision GPS (1.5m), laser based range finder (300m), Precision compass, precision inclinometer and camera system. Used to geolocate and document. It can be used to remotely dimension cable and buildings, etc.

Follow TechRentals on LinkedIn and stay up-to-date on Test and Measurement news, application notes, and case studies.

Communicate - Anywhere, Anytime!Stay connected with 24/7 access to voice, email, and data

Ensure peace of mind on your next trip

Don’t get caught without reception - rent a Satellite Phone. The perfect device to maintain a critical lifeline no matter where you are.

With access to both Iridium and Inmarsat networks, as well as ongoing technical support from our friendly team, you’ll have peace of mind knowing you are always connected with a satellite phone.

Rent the Explorer 700 BGAN Satellite Terminal and benefit from reliable, high speed data no matter where you are

Flexible data packages available with no monthly access fees Download and upload speeds up to 492 kbps Single or mutli-user connectivity Compact and easy to use

Only pay for the calls you make No monthly access fees No capital outlay

Short, medium, and long term rental options Ongoing service and full technical support Phone comes in a ‘Grab ‘n’ Go’ pelican case

telecom

1300 550 014 satellite@trtelecom.com.au www.trtelecom.com.au

SAVE 10%When you mention this ad!*

*Terms and conditions apply.

Avoid Capex and rent the

Explorer!

TS0225*Terms and conditions apply.

64

Environmental & OHS www.techrentals.com.au

Environmental Gas & Vapour MetersPersonal Gas & Vapour MonitorsAirborne Dust & Particle MetersAir Quality & Heat StressMoisture & Humidity MetersNoise & Sound AnalysersRadiation Monitoring & ProtectionWater Quality, pH Meters & EletrochemLight Meters, UVA/B/C MeasurementWeather StationsEnvironmental Flow Meters

Environmental Gas & Vapour Meters

Environmental Gas & Vapour Meters cont’d.

Personal Gas & Vapour Monitors

See also Combustion, Flue & Industrial Gas Analysers on page 51

See also RKI,EAGLE2 Gas Detector Confined Space Plus PID on page 65

Aeroqual Logging Ozone Monitor - Indoor Air Quality UseAER,500L (5958) AU/MY

Portable ozone monitor fitted with low concentration-range detection head. Operating range 0~0.5ppm ozone with display in ppm or mg/m3. Gas sensitive semiconductor (GSS) sensor for accurate low-level measurements, T90 response approximately 100s. Operation from mains power supply or battery pack (4h operation). Internal data logging for 8000 points with software and cable for download to PC, or data logging direct to PC. Application for indoor air quality measurements.

Geotech Landfill Gas ExMonitorGEO,GEM5000 (5940) AU

Measures CH4, CO2, O2, CO & H2S. Designed for spot measurements. Intrinsically safe and has a built in GPS system. It can also measure flow rates from bore holes and perform landfill gas energy calculations.

Ion Science Gascheck Helium, Butane & SF6 DetectorION,GASCHECKG3 (5907) AU/MY

Microthermal conductivity gas detector. Reading in cc/s, g/yr, mg/m3 or ppm. Detects most gases however particularly suited to ammonia, argon, butane, helium, hydrogen & SF6. Calibrated against Helium. Battery Life 40h. Sensitivity (cc/s) He 1x10-5, CH4 5x10-5, R12 5x10-5, Ar 1x10-4. Accuracy 5% of displayed reading + 1 digit. Response 1s. Flow rate 2cc/min. Operating -20 to 60°C. Data logging, stores 10 readings.

Portable hydrocarbon analyser for insitu realtime petrochemical contamination. Measures Total Petroleum Hydrocarbons (TPH) in water and water vapour. Uses a fibre optic chemical sensor (FOCS). Measures 0.1ppm xylene in water ad < 10ppm in vapour. Accuracy ±15% of readings. Response time <5sec. Certified to EPA Method 8020.

PetroSense PHA-100 Petroleum Hydrocarbons in Water DetectorPET,PHA-100 (5945) AU

PPM HTV-M Formaldehyde MeterPPM,HTV-M MY

Portable Formaldehyde meter for measuring airborne formaldehyde in the workplace. Electrochemical sensor, with internal pump for rapid response. Operating range 0 to 10 ppm with readout on 4 digit LCD display. Kit includes field calibration standard. Operates from 9V alkaline battery or dc adapter if used as a continuous data logger. The mini USB allows data to be downloaded to PC using the htV-m software.

Handheld volatile organic compound (VOC) gas monitor. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.

Minirae 3000 Advance Handheld VOC MonitorRAE,MR3000 MY

Handheld volatile organic compound (VOC) gas monitor. Its photoionisation detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.

RAE Systems PPB Photoionization (PID) Volatile Organic Compound (VOC)RAE,PPB3000 (5928) AU

Measures the purity of SF6 gas. Uses a fast acting mirror system to measure humidity. Displays direct % purity. Includes a gas recovery system. Includes built in test for instant verification of the system accuracy. Dew Point measurement -55 to 20°C, pressure 0.1~30 Bar. Accuracy ±0.5° dew point. Gas coupling is done via a quick connect fitting.

RH Systems 973-SF6 AnalyserRH,973-SF6 (5910) AU

Wika GA-15 SF6 Leak DetectorWIK,GA-15 (5909) AU

A fast response SF6 leak detector which will detect concentrations of SF6 down to 3ppmv. Only detects SF6 and is unaffected by moisture and wind.

Wall mount Alcohol Breath Tester (BAC or breathalyzer). Automatic recalibration every 24hrs. Very simple to use. Australian Standards Certified - AS 3547 Type III Low cost maintenance and consumables (standard drinking straws).

Alcolizer Wall Mount Alcohol (BAC) Breath TesterALC,WM3 (5980) AU

65

Environmental & OHS

Personal Gas & Vapour Monitors cont’d.

Airborne Dust & Particle Meters

Airborne Dust & Particle Meters cont’d.

Air Quality & Heat Stress

Automatic calibration testing and data management system for the BW microclip gas detection equipment. Carries out fully automatic “hands-free” calibration and functional bump test. It also enables data collected during operation of the BW microclip to be downloaded.

BW Bump & Logging Download for BW,MICROCLIPBW,BUMP (5938) AU/MY

Continuous LCD shows real time gas concentrations. Simple 1 button operation. Measures: H2S 0 to 100ppm (1ppm resolution), CO 0 to 500ppm (1ppm resolution), O2 0 to 30% (0.1% resolution) and Combustible gases 0 to 100% LEL (1% resolution), 0 to 5% v/v (0.1% resolution). Alarms: visual, vibrating and audible (95dB), Low, High, STEL, TWA and OL (over limit). Lithium polymer battery life 12hrs (typical) recharge time <3hrs.

BW Gas Alert Micro Clip Confined Space 4 Gas DetectorBW,MICROCLIP (5937) AU/MY

Motorised sampling pump that provides 300ml/min for remote sampling up to 18m away. Runs continuously for 30hrs on batteries. Includes 3m sampling hose. Includes built in water traps and particulate filter.

BW Sampling Pump for BW,MICROCLIPBW,GA-SPAK (5939) AU/MY

Single gas sensor for NH3 (Ammonia). There are two in the kit including a bump station with 50ppm gas.

BW GasAlertExtreme Single Gas Ammonia NH3 DetectorBW,GA-NH3-KIT (5935) AU/MY

Measures 4 confined space gasses CH4, O2, H2S and CO plus a PID. Alkaline 18 hours or Ni-MH 20 hours capability. Powerful long-life pump up to 38m range. Low flow pump shut off and alarm. Datalogging standard. IrDA communications port. Autocalibration/ single gas calibration. Internal hydrophobic dust filter. External probe with hydrophobic filter. Ergonomic RFI/EMI/chemical/weather resistant enclosure. Intrinsically safe design, CSA approval.

RKI Eagle2 Gas Detector, Confined Space plus Photoionisation (PID)RKI,EAGLE2 (5930) AU

See also RAE,PPB3000 PPB Photoionisation (PID) Volatile Organic Compound (VOC) on page 64

TSI 8525 P-Trak Ultrafine Particle CounterTSI,8525 (5877) AU

Range 0.01 to 5 x 105 particles/cm3. Particle size range 0.02 to greater than 1micron. Includes PC software and cable. Suitable for detection of ultrafine particles associated with pollutants. Battery powered (8h operation using alkaline batteries).

TSI 8530 Aerosol Monitor and LoggerTSI,8530 (5873) AU/MY

Portable dust and particle monitor, light scatter photometer. Measure concentrations corresponding to PM1, PM2.5 & PM10. Aerosol concentrations 0.001 to 150mg/m3. Used for industrial/occupational hygiene surveys, indoor air quality monitoring, outdoor environmental monitoring, baseline trending and screening, etc.

TSI Environmental Enclosure for the TSI,8530TSI,8530-ENC (5875) AU/MY

Enclosure to suit the TSI,8530. Includes two additional batteries and charger. Includes waterproof enclosure and heat shield and enclosure stand.

TSI Environmental Enclosure for the TSI,8530 Dusttrak IITSI,8530-ENC-S (5876) AU

Enclosure to suit the TSI,8530. Includes two additional batteries and charger. Includes waterproof enclosure.

TSI 8533 Aerosol Monitor and LoggerTSI,8533 (5870) AU

Portable dust and particle monitor, light scatter photometer. Measure concentrations corresponding to PM1, PM2.5 and PM10. Aerosol concentrations .001 to 150mg/m3. Used for industrial/occupational hygiene surveys, indoor air quality monitoring, outdoor environmental monitoring, baseline trending and screening etc. Will size particles in three sizes PM1, PM2.5 and PM10.

TSI AM510 Personal Aerosol Monitor; CSA & ATEX IS approvalsTSI,AM510 (5871) AU

Wearable dust monitor. Built in Impator allows you to chose either ‘none’, 1, 2.5 or 10µm particle sizes. Datalogs TWA in the range of particle concentrations from .001 to 20mg/m3 Runs 9.2hrs on rechargeable NiMH batteries. USB download capability. CSA & ATEX IS approvals.

Fluke 975 AirMeter Indoor Air Quality MonitorFLU,975 MY

Indoor Air Quality (IAQ) monitoring, measure temperature, humidity, CO2 and CO concentrations. Humidity range 10 to 90%, temperature range -20 to 50°C. CO measurement range 0 to 500 ppm and CO2 range 0 to 5000 ppm. Dew point temperature and wet bulb temperature is calculated. Data logging for 25,000 data point with 1min to 1h interval. Comes with USB cable for download interface and software viewing and reporting. Battery operated.

1800 632 652

66

LAF Technologies Pty Ltd

Testing, Monitoring & Laboratory Products

State-of-the-art Calibration Laboratories

Education & Training Services

Professional Servicing& Support

NATA Accredited Test and Certification Services

LAF Technologies Pty LtdHead Office: 12 Royan Place, Bayswater North, VIC 3153 Australia

Call: 1300 306 002 www.laftech.com.au

Laboratory Equipment• Vacuum Equipment• Baths & Circulators• Ovens & Furnaces• Forensic Equipment• Incubators & Chambers• Chemical & Powder Safe Handling

Cleanroom & Facility Monitoring• Handheld Particle Counters• Portable Particle Counters• Fixed / Remote Particle Counters• Liquid Particle Counters• Gas Particle Counting• Complete Facility EMS Monitoring Systems

Contamination Control Products• Biological Safety Cabinets• Cytotoxic Cabinets• Laminar Flow Cabinets• Professional PCR Cabinets• Isolator Technologies• Fume Cabinets

Indoor Air Quality Monitoring• Multi-Function IAQ Monitors• Dust Monitors, Particle Counters & Sizers• Ultrafine Particle Counters• Microbial Air Sampling• Filters & Filter Testing Equipment• Portable Odour Monitors

Ventilation Test Instruments• Air Balancing Hoods• Vane Anemometers• Duct Leakage Testers• Sound & Vibration Meters• Digital Micro Manometers

Particle & Dust Monitoring• Personal Dust Monitors• Portable Dust Monitors• Tripod Based Dust Monitors• Fixed Dust Monitoring Stations• Ultrafine Particle Counters• Particle Research Instruments

Fume CupboardsProfessional testing and certification of fume cupboards in accordance with AS/NZS 2243.8 Australian standards

Fume CabinetsProfessional testing & certification of fume cabinets (luminance, smoke & velocity) to AS/NZS 2243.9 Australian standards

Laminar Air Flow CabinetsProfessional testing and certification of laminar air flow cabinets in accordance with AS 2252.6-2011 Australian standards

Class 3 Safety Cabinets & IsolatorsProfessional testing and certification of class 3 biological safety cabinets and isolators to the highest standards

Decontamination ServicesDecontamination of cabinets, incubators and rooms utilizing the latest iHP technology to achieve a 6 log kill

Cleanrooms & WorkstationsCleanroom and workstation testing & certification in accordance with ISO 14644-3

Cytotoxic Drug CabinetsProfessional testing and certification of cytotoxic drug cabinets in accordance with AS2567 Australian standards

Class 1 Biological Safety CabinetsProfessional testing & certification of class 1 biological safety cabinets in accordance with AS 2252.1 Australian standards

Class 2 Biological Safety CabinetsProfessional testing & certification of class 2 biological safety cabinets in accordance with AS 2252.2 Australian standards

Particles in Gas / Compressed AirAccurate and reliable particulate testing in compressed air and gas in accordance with ISO8573-4 standards

Particulate CleanlinessParticulate cleanliness testing in accordance with AS/NZS and ISO14644.1 international standards

HEPA Filtration TestingProfessional testing & certification of HEPA filters to AS1807.6, AS1807.7 or ISO14644-3 standards

Testing and Certification Services

67

Environmental & OHS

Air Quality & Heat Stress cont’d. Moisture & Humidity Meters

Noise & Sound Analysers

Testo 635-2 Humidity, Temperature & Dewpoint MeterTES,635-2 (5859) AU

Portable humidity meter fitted with robust stainless probe with sintered filter-cap for general or duct measurements to 120ºC, and fast-action K-type surface temperature probe. Displays relative humidity, absolute humidity, dew point, degree of humidity, enthalpy, temperature, and differential temperature (dewpoint~surface). Operating range 2~98%RH (±2%). Air temperature -20~120ºC (±0.2/0.5). Surface temperature -60~300ºC (±0.1). Internal memory for 10,000 values with USB interface, cable and software for download and presentation. Battery operated.

Testo 635-2 Temperature & Dewpoint Meter for Compressed Air SystemsTES,635-2-HPD (5912) AU

Portable humidity meter fitted with 0636 9836 HPD pressure dewpoint probe for measurements in compressed air systems, -60 to +50ºC tpd, 0~100%RH. Internal memory for 10,000 values with USB interface, cable and software for download and presentation. Battery operated.

Testo 645 Humidity & Dewpoint MeterTES,645-1 (5858) AU

Portable humidity meter fitted with robust stainless probe for ambient work or duct measurements to 120°C. Displays relative humidity, absolute humidity, dew point, degree of humidity, enthalpy and temperature. Operating range 2 to 98%RH [±2%], -20 to 120°C [±0.4/0.5]. Battery operated.

TSI Q-TRAK IAQ Monitor CO2, CO Temperature & Humidity LoggerTSI,7565 (5861) AU

Measures CO2 0 to 5,000ppm ±3%, temperature 0 to 60ºC ±0.6ºC, humidity 0 to 95% ±3%, CO 0 to 500ppm ±3% and barometric pressure 517.15 to 930.87mmHg ±2%. Calculates dew point, wet bulb and percent outside air. Displays 5 measurements simultaneously. User selectable logging interval and start stop times. Stores 39 days data at 1min intervals 56,035 data points. This unit also has external thermocouple measurements.

TSI Q-Trak plus Indoor Air Quality Monitor with LoggingTSI,8554 (5860) AU

Indoor air quality (IAQ) monitor for temperature and humidity measurements, CO and CO2 concentrations. Humidity range 0 to 95%, temperature range 0 to 50°C. Electrochemical cell for CO 0 to 500ppm. NDIR cell for CO2 0 to 5,000ppm. Data logging for 48,671 data points with interval adjustable 1s to 1h. Fitted with RS232 interface, and software included for download, storage and reporting. Battery or mains operation with AC adaptor.

GE Panametrics PM880 Industrial Moisture AnalyserPAN,PM880 (5911) AU

Intrinsically safe moisture analyser for compressed air systems, non-corrosive gases & hydrocarbons such as natural gas (IS certification to ATEX and CSA). Displays dew point, moisture concentration, pressure & temperature. Dew point calibrated measurement range -80 to 20°C with data to -110°C. Pressure range 7 to 69 Bar limited by sensor, gauge and safety-valve (operating range from 5µHg). Temperature range -30 to 70°C. Gas flow operating range from static to 10,000cm/s velocity. Supplied with compact sample system with gauge, safety-valve, sampling valves and fittings (¼” Swagelok). Data logging of up to 100K moisture points, with infrared port and software for download. Battery powered only (15-24h operation) with second battery and charger (note charger is not IS).

See also Vibration Analysis on page 54, 56

ARL NGARA Environmental Noise LoggerARL,NGARA (5690) AU

Can be configured to record all sound continuously so noise data can be post processed. It can provide logged data, WAV data & alarm/triggered details. Type 1 microphone provided.

B&K 4448 Badge Dose Meter IS Kit of 3BK,4448-IS-3KIT (5680) AU

Kit of 3 Intrinsically safe noise dose meters. The kit includes a NATA calibrated 4231 Type 1 calibrator. These are badge type Dose Meters, shoulder mounted, cable free and simultaneously measure all parameters required by noise at work standards. Simple two button operation. Rechargeable battery provides several working days of measurement.

Digital Audio Test Set comprising of NTI Digirator & NTI DigilyserNTI,NT-DAS (5684) AU

Audio Excel Line for digital audio signals. System including the Digilyzer and Digirator for producing digital audio signals and analysing those digital audio signals up to and including 5.1 surround sound. Up to 192kHz 24bit, AES3,S/PDIF, TOSLINK & ADAT. ync input (AES3, Word Clock, Video). Supports Dolby Digial, E, PL II, DTS. Channel transparency check. Channel delay measurement.

NTI XL2+M2210 Sound Level MeterNTI,XL2+M2210 MY

Sound Level Meter comes with Class 1 microphone, acoustical analyser options and audio analyser options. Applications in sound installations, live sound, studio, broadcast and environmental noise measurements. Logging all data or subsets in selectable intervals. Recording of wav-files (ADPCM), a new wav-file starts every 12 hours (max. wav-file size 512 MB). Real time analyzer with frequency resolution: 1/3 octave, 1/1 octave, wide band and frequency range: 6.3Hz to 20kHz. Frequency weighting: A, C, Z. USB interface with PC analysis tool.

New items are being added to the inventory constantly, so if you can’t see what you’re looking for, please call us on 1800 632 652.

1800 632 652

68

Environmental & OHS www.techrentals.com.au

Noise & Sound Analysers cont’d.

Radiation Monitoring & Protection

Water Quality, pH Meters & Electrochem

Water Quality, pH Meters & Electrochem cont’d.

Rion NL52EX SLM with NX42RT Octave and 1/3 AnalyserRIO,NL52EX-NX42RT (5670) AU

Type 1 Sound Level Meter, including the Octave and 1/3 Octave measuement option NX42RT. This meter can be used to check NC levels for compliance checking. The instrument includes a NATA calibrated calibrator. All data is saved to an SD card.

See also E & H Field Strength Meters on page 10-11

Fluke 481 Radiation Survey MeterFLU,481 (5580) AU

Provides exposure measurements in mR/hr to 50R/h (0.55v/hr). Detects skin-dose, deep-dose and X-ray radiation. Measures dose & dose rate.

HPI Cypher 5000 Digital Radiation Alert MonitorHPI,CYPHER5000 (5583) AU

Alpha, Beta, Gamma and X-ray radiation monitor. Meter, LED, audible indication and detachable probe. Range 0.1 to 1,000,000 CPM; Accuracy 1% or 2 digits.

Narda 8217 Microwave Oven Survey MeterNAR,8217 (5553) AU

For oven power measurement complete with beaker and thermometer. Calibration frequency 2.45GHz. Measurement range 0.5 to 10mW/cm2. Battery operated.

Narda RadMan Personal RF Field Radiation MonitorNAR,RADMAN (5557) AU

Personal monitor and leakage detector for high frequency electromagnetic fields. Simultaneous E and H field measurements with audible and visual alarms. Frequency range H field 27MHz to 1GHz; E field 1MHz to 40GHz. Operation as personal monitor with compensation for human body absorption, or with isotropic detection for RF leakage sensing and simple four-level measurement using LED indicators.

DKK TOA RC-24P Portable Residual Chlorine MeterDKK,RC-31P-DP (6046) AU

Portable, direct-reading residual chlorine meter for water analysis. Range 0~2mg/L [ppm]. Reagent-free measurement with electrode, 3m cable, float and sample container for in-situ or grab-sampling. Compatible with direct chlorination, hypochlorite or dichloroisocyanurate dosing. Calibration data stored in electrode with correlation with DPD methods. Waterproof to IP67. ISO validation functions, storage of 300 measurements and RS232 printer output. Battery operated.

Hydrolab Minisonde 5 Multiprobe Water LoggerHYD,MS5 (6020) AU

Minisonde 5 multiprobe water/borehole logger, including ‘Surveyor’ data collection system with GPS. Includes sensors for Dissolved Oxygen (HACH LDO), Conductivity, pH, Redox (ORP), Turbidity (Self-Cleaning), Temperature, Depth (0 to 25m) and GPS position. Includes the surveyor data aquisition system so no laptop is needed for download or data collection. Includes a 25m cable.

ISCO 6700 Series Water SamplerISCO,6712 (6057) AU

Advanced water sampler for fully programmed collection. Samples are collected in up to 24 disposable plastic containers based on time, flow, and/or parameter set points. Fitted with NEMA 4X,6 (IP67) sealed controller featuring an exclusive, built-in pump.

TPS 90FL-T Multi-function Water Quality Meter & LoggerTPS,90FL-T (6028) AU

Field meter and logger for water quality measurements. Configured with independent probes for pH, conductivity/salinity (TDS)/temperature, dissolved oxygen (DO) and turbidity. Cables 5m with probe holder and safety harness. LCD display readout with simultaneous display of all measurements. Manual, “notepad” storage or automated data logging for up to 1,808 sets of readings by time and date. RS232C interface, with WinTPS software included. Supplied with rechargeable battery, and clip-lead for operation from a 12V source such as a car battery.

TPS WP-80 pH and Temperature Meter for Testing MeatTPS,WP-80M (6002) AU

Portable hand-held meter for pH, mV and temperature. The instrument is capable of applying Bendalls equation to the pH reading for Meat Standards Australia grading requirements. Supplied with combination pH electrode and separate temperature sensor on 1m cables. Operating ranges 0~14pH and -10~120ºC [automatic sensor recognition with auto pH correction 0~100ºC]. Case water resistant to IP67, connectors to IP65. Menu driven, with alphanumeric display. Auto storage of time and date of last calibration for GLP. Memory for 2400 readings of data, time and date, for Notepad results collection, or for AutoLog with logging intervals between 1s and 90h. Fitted with RS232C interface and supplied with download-software, charger and solutions. Rechargeable NiMH battery gives up to 50h operation.

The TPS 90FL-T Multi-function Water Quality Meter & Logger is the piece of equipment used in the Site

Monitoring Kit on page 70.

If you have any technical problems or need assitance evaluating your work site, call our friendly technical

team today on 1800 632 652.

69

Environmental & OHS

Water Quality, pH Meters & Electrochem cont’d.

Weather Stations

Light Meters, UVA/B/C Measurement cont’d.

Environmental Flow Meters

Light Meters, UVA/B/C Measurement

TPS WP-88 Turbidity & Temperature Meter with 8m CableTPS,WP-88 (6031) AU

Portable hand-held turbidity and temperature meter for field or laboratory use. Sensor probe diameter 45mm, with 8m cable. Turbidity ranging 0.1 to 200/2,000NTU ±1NTU with autoselection. Temperature compensation and sensor range 0 to 60ºC ±0.1ºC. Case water resistant to IP67, connectors to IP65, with detachable cable and sensor. Menu driven, with alphanumeric display. Auto storage of time, date and results of last calibration for GLP. RS232C interface, and memory for 150 readings of data, time and date, for Notepad results collection, or for AutoLog results collection with logging intervals between 1min and 24h. Rechargeable NiMH battery gives up to 50h operation. Supplied with download-software, charger and calibration solutions.

Van Essen DI502 Mini-Diver Borehole Level Logger & Barometer 20mVAN,DI502 (6061) AU

Mini-diver borehole level logger 20m, 1cm accuracy. Kit includes barometric logger for atmospheric pressure compensation. Will also log temperature. Temperature range -20 to 80ºC. Accuracy 0.1ºC. Size 22 x 90mm. Stores 24,000 measurements per parameter. Stainless steel housing barometric (l/c) logger for compensation. 10 year battery life.

Hagner EC1-X Lux Meter NATA Calibrated

Hioki 3423 Lux HiTester Digital Illuminance Meter

HAG,EC1-X (5600) AU

HIO,3423 MY

Digital illuminance meter with NATA certification. measurees from 0.1~200,000 lux. Has a remote measurement head on 2m cord. Accuracy +/- 3% of range +/- last digit. Battery Operated.

Manual switching and autoranging. LCD display with 3 1/2 digits (“1999”) for five measuring ranges to 20/200/2000lx in 1-count steps, 20,000lx in 10-count steps and 200,000lx in 100-count steps with accuracy +/-4%. Response time in autorange mode 5s (2s in manual range mode). Autozero, hold and backlight function with delay for taking readings in low light. Input for AC power adaptor, connecting-cable to allow separation of sensor unit and meter, and 200mVDC analog output with cable. Battery powered.

ILI 1400ABC Radiometer for UV MeasurementsILI,1400ABC (5614) MY

International Light model 1400 radiometer with backlit LCD display, autozero and autoranging. Continuous reading with hold function, or integrated “dose” measurement up to 24h. Smart detectors with storage of units and detector-calibration data. Analogue recorder output. Mains adaptor or battery power. Supplied with three sensors: UV actinic hazard (UVC with B & A components matched to OSHA requirements), range 2.50e-7 to 2.50e-3 W/cm2 eff. UVB + A (total “solar” radiation), range 1.16e-7 to 4.07e-1 W/cm2. UVB, range 1.54e-6 to 1.54e-2 W/cm2

Yokogawa 51001 Lux Meter NATA CalibratedYEW,51001-NATA (5607) AU

Digital illuminance meter with NATA certification. Measuring range from 0 to 99.9/999/9,990/99,900/999,000lux. Accuracy <3,000lx 4% ±1 digit >3,000lx 6% ±1 digit. Autoranging with silicon sensor. Battery operated.

Vaisala WXT520 Weather StationVAI,WXT520-KIT (5885) AU

Completely solid state measurement of rainfall to 0.1mm, rain intensity 0.1mm/hr, rainfall duration, hail duration and intensity, barometric pressure 600 to 1100hPa, relative humidity 0 to 100%, wind speed 0 to 60m/s, wind direction and temperature -52 to 60°C. The instrument is logged using a Datataker DT80M and at the a press of a button the data can be downloaded to a memory stick. Daily summary reports are email once per day. The system includes a stand and will run continuously, it includes a solar panel to keep the battery charged.

See also E & H Field Strength Meters on page 10-11

Global FP111 Digital Water Velocity MeterGLO,FP111 (6147) AU

Portable flow probe - current meter for water velocity measurements in streams, channels and partially filled pipes. Propeller sensor in 50mmØ housing, fitted to telescopic handle [1.8m] with gauging marks to 900mm depth. Digital LCD flow meter display for instantaneous liquid velocity and average, maximum, stopwatch or clock. Minimum depth about 50mm. Range 0.1 to 4.5m/s ±0.05.

Hydrological Services Universal Current Meter OSS-B1HYS,OSSB1 (6145) AU

Water current meter for measurement of flow velocity in rivers, streams, channels and open water. Robust streamlined stainless body fitted with high precision 100mmØ fan [flow range 0.025 to 5m/s]. Set of stainless wading rods for depths to 3m. Rechargeable “Hydromate” ruggedised field computer with IP65 case. Storage of fan calibration formulae for direct readout of volume-flow. Touch screen entry for set up, input, storage and download. Supplied with PC download software and cable.

Watch how-to videos on any piece of equipment displaying this symbol.Visit www.techrentals.com.au and select Technical Tips and Videos.

1800 632 652

Oversee Your Site with ConfidenceA TechRentals Site Monitoring Kit can warn you of potential problems

Monitoring kit includes:

3 Ground vibration logging - Profound Vibra Ground Vibration Logger

3 Water run off analysis - TPS 90FL-T Multi-function Water Quality Meter and Logger

3 Noise logging - ARL NGARA Environmental Noise Logger

3 Dust monitoring - TSI 8533 Aerosol Monitor and Logger

Discovering that your work site doesn’t meet the required standards could lead to costly liabilities. Consequences can be exacerbated if a construction site is found to be particularly hazardous or environmentally detrimental.

Excess ground vibration, noise, dust, and runoff pollution, are all common, but serious considerations for those in construction.

Monitoring work sites is an inexpensive way to be sure that all state and council regulations are adhered to, while simultaneously satisfying Corporate Social Responsibilities (CSR). You can do this simply with a work site monitoring kit from TechRentals.

techrentalswww.techrentals.com.au1800 632 652 rent@techrentals.com.au

For more information, contact us today:

71

• Acoustic Research Laboratories• Anritsu • EXFO• Flir Systems• Fluke • Fluke Networks• GE Druck • Keysight Technologies• Megger • Testo• Viavi

TechRentals Business Partners

TechRentals are distributors and resellers for:

TechRentals - The perfect solution!

3 Anritsu3 Viavi (formerly JDSU)3 Megger3 Gridsense

TechRentals vast fleet of equipment offers a range of solutions to many markets. These include the Aviation, HVACR, Defence, Electrical, Mining, Mechanical and Telco markets. If you can’t find the equipment you’re looking for, our international partner network gives you access to an even larger and diverse inventory to help satisfy your requirements.

It’s important to remember that renting is much more cost effective than to purchase outright. This enables you to preserve capital for other parts of your business. Should you need to eventually own the assets, TechRentals offer a Rental Purchase Option. No matter your need, we will find you the assets you require when you want them.

3 Acoustic Research Laboratories3 Kingfisher3 Flir

Our strength lies in our strong technical capacity and the synergies between our various business units

Test and Measurement

Radio Communications

Satellite Communications

TechRentals offers specialised test and measurement equipment for a wide range of industries. Products offered encompass electrical power measurement and analysis, general industrial applications, physical measurement, radio frequency, environmental and OH&S, data and telecommunications, electronics and more.

The leader in the industrial rental arena for more than 40 years, TechRentals also offers Long Term Rental (LTR) solutions and flexible purchasing options that can be tailored to your specifications.

TR Hirecom is Australia’s largest two way radio communications rental company, and has been providing radios and systems to suit the security, events, hospitality, construction, manufacturing, and petrochemical industries for the past 15 years.

As a Motorola Solutions Channel Partner, TR Hirecom offer the latest in digital technology. With a choice of IS/FM/ATEX rated radios, contact us today to see how we can tailor you a solution for just about any application.

TR Telecom offers a range of satellite telephony products (for rent or purchase) from Iridium and Inmarsat, as well as prepaid and postpaid call plans.

Global satellite data solutions are also available through Iridium’s Short Burst Data (SBD) and Inmarsat’s Broadband Global Area Network (BGAN). Please contact our customer support team for more information, or view our full range of satellite communications equipment at our online shop.

techrentalswww.techrentals.com.au

1800 632 652

1800 88 7368

1800 222 327

1300 550 014

rent@techrentals.com.au

sales@techrentals.com.my

rent@trhirecom.com.au

satellite@trtelecom.com.au

hirecomwww.trhirecom.com.au

telecomwww.trtelecom.com.au

Calibration, Repair & SalesTR Calibration serves customers in defence, manufacturing, aviation, and other high tech sectors. As a NATA accredited ISO/IEC 17025 provider of calibration services, we offer NATA endorsed reports or non-NATA endorsed calibration documentation depending on your requirements. Ask today about our range of booking options, or whether our Mobile Calibration Lab can benefit you.Authorised Service Agent for:- Barfield Aviation - GEC Weighing Platforms- Megger Electrical - Stahwille Torque Products

Authorised Service Centre for: GE M&S Pressure Products including ADTS

Approved Distributor for:- GE ADTS Products- GEC Weighing Platforms

1300 790 480 info@trcalibration.com.au www.trcalibration.com.au

www.techrentals.com.my

Australia

1800 632 652www.techrentals.com.au

Malaysia

1800 88 7368www.techrentals.com.my

New Zealand*

0800 832 473www.techrentals.co.nz* Distributor of TechRentals Australia