TEST KITS & TEST KIT ACCESSORIES - Bavco · M110694 1 Test Cock Cleaning Tool HWV102 1 Hempel Lg BV...
Transcript of TEST KITS & TEST KIT ACCESSORIES - Bavco · M110694 1 Test Cock Cleaning Tool HWV102 1 Hempel Lg BV...
75 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIEST
ES
T K
ITS
& A
CC
ES
SO
RIE
SCameron / Barton Model 246 Part # BGE246
Cameron / Barton Model 247 Part # BGE247
Safe Working Pressure: 500PSI
Material: Brass
DP Range: 0 – 15 PSID
Scale Face: 246 - 3” (0-15 PSID, 150 divisions) 247 - 6” (0-15 PSID, 150 divisions)
Accuracy: ± 0.5% (0.075 PSID)
Temperature Range: +32°F to +200°F
Lens Material: Lexan
Carrying Case: Metal reinforced high density polyethylene. Water-resistant closed cell foam inside
Hoses: (3) 6-foot (upstream, downstream, and bypass)
Manifold: 3-valve (high, low and bypass)
Bleed Valves: (2) ¼ inch (brass)
Adapter Fittings: (3) each, SAE 1/8”, ¼”, ½”, and ¾”
Gauge Dimensions: 246: 10.5” X 4”
247: 10.5” X 7.5”
Gauge Weight: 246: 7 lbs
247: 8.5lbs
Options: Line Pressure Gauge Needle Type Bleed Valve
76 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIES
Gauge Type: Diaphragm Differential Pressure
Dial Size & Range: (4 ½”) 0-15PSID with a (1 ½”) Line Pressure Gauge
Differential Pressure Accuracy: ±0.2PSID (Descending)
Working Pressure: 300 PSIG
Materials of Construction: NOTE: Materials shown are standard. For Optional materials, contact the local Mid-West Instrument Representative.
Gauge: Engineering Plastic Body, with EPDM Diaphragm & SS Internal Metal Parts.
Valves: Soft-seated Brass
Tubing & Fittings: Brass & Nylon
Hoses & End Ftgs: Nitrile jacket and liner. Shrader ¼” brass coupler
Case: Polyetyhylene
Hose Length: (Three) each 5’ long (color coded). (one) each 4’ long clear bleed tube
Filters: Testkitisprotectedwith90micronfilterstominimizeplugging with scale, sand, etc. Elements can be cleaned or replaced.
Adapter Fitting: 3setsofbrassfittingsprovidedforhookuptoallstandard sizetestcocks.
Temperature Limitations: Maximum150°F.Freezingtemperaturesmustbeavoided.
Special Note: Test kit is capable of performing all known test procedures including those recommended by ASSE, AWWA, FCCC and HR-USC, and NEWWA.
Physical Dimensions: 14 ½” Wide X 9” Deep X 16” High (approximate)
Weight: 14 lbs / 6.4 kilos
Manufacturer reserves the right to change specifications without notice.
Midwest Model 830Part # MGE830
77 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIEST
ES
T K
ITS
& A
CC
ES
SO
RIE
S
Gauge Type: Diaphragm Differential Pressure
Gauge Dial Size & Range: 4 ½” 0-15PSID / 100KPA DP Gauge with a ½” Line Pressure Gauge
Differential Pressure Accuracy: ±0.2 PSID (Descending)
Working Pressure: 200 PSIG
Body Material: Glass Reinforced Engineering Thermoplastic
Wetted Materials: EP Elastomers, Brass and 316 SS Metal Parts
Valves: Soft-seated Needle with replaceable seats
Hoses & Ends Fittings: Nitrilejacketandliner,Schrader¼”brasscoupler,inlinefield serviceablefilters
Carrying Case: Durable Molded Plastic
Hose Length: Three each / 5’ Long (color coded)
Bleed Tube: One each/ 4’ long clear (845-5 only)
Filters: Testkitisprotectedwith90micronfilterstominimizepluggingwithscale, sand, etc. Elements can be cleaned or replaced.
Adapter Fittings: Threesetsofbrassfittingsprovidedforhookuptoallstandardsizetest cocks.
Temperature Limitations: Maximum 150oF / 65oC. Freezing Temperatures Must Be Avoided! Test Procedures are laminated and stored in the lid of test kit
Manufacturer reserves the right to change specifications without prior notice.
The Model 845 is available in a five, three and two needle valve configuration
Midwest Model 845 Part # MGE 845-5, MGE 845-3, MGE 845-2
78 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIES
Watts Model TK-9A Part # TK9A
Maximum Working Pressure: 175PSI
Maximum Working Temperature: 210° F
Gauge: 4 1/2” diameter face dual scale 0-15PSID & 0-1kg/cm² ±2% accuracy full scale
Test Valves: (2) ball valves and (1) needle valve
Hoses: (3) 3’ with female threaded swivel couplings
Adapters: (3) ¼” threaded coupling adapters (3) ½ X ¼” bushings (3) ¾ X ¼” bushings
(1) 16” securing strap
(1) Moisture resistant instruction Guide
Case: Light weight, shock resistant molded plastic with foam inserts
Watts TK-7 Part # TK7
Total working height of Tube: 44”
Adapters: (2) Brass, for No. 7 Modules & Double Checks
Tubing: 3 Segments of Plastic Tubing Moisture Resistant Instruction Panel
Case: Durable Simulated Leather. Weather & Mildew Proof
79 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIEST
ES
T K
ITS
& A
CC
ES
SO
RIE
S
Watts TK-99D Part# TK99D
Maximum Working Pressure: 200 PSIG
Maximum Working Temperature: 210º F
Differential Pressure Readout: 0-200 PSI
Separate Inlet Pressure Readout: 0-200 PSI
Adapters: Included
Hoses: Three 36” color coded hoses with female swivel couplings
One moisture resistant operation manual
High contrast LCD display
0.25% Full Scale Accuracy
Needle Valves: 316 stainless steel needle valves with adjustable packing
gland and renewable seats
High Impact ABS housing
Watts TK-99E Part# TK99E
Maximum Working Pressure: 200 PSI
Maximum Working Temperature: 200º F
Gauge: 4.5” diameter face, dual scale 0-15PSI & 0-1 kg/cm², ± 1% accuracy full scale
Test Valves: Three needle valves
Pressure Gauge: 0-200PSI System gauge
Hoses: Three 6 foot color coded hoses with female threaded swivel couplings
Adapter: Three ¾ X ¼” bushings Three ½ X ¼” bushings Three¼”flaredfittings
One Shock Cord
One lightweight durable carrying case
80 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIES
Watts TK-DL Part # TKDP
Downloading capabilities allows for permanent storage of all test results electronically
Allows user to customize printed header and footer through your PC system
RS232 serial port for downloading test results to a PC system
Provides printed, on site documentation, recording the time, dateandverifiedtestresults
Unmatched accuracy to ±0.2%
No programming required
Software program is menu driven and will operate with a mouse or key stroke
Self calibrates prior to each test
Designed to test pressure vacuum breakers, reduced pressurebackflowpreventersordoublecheckvalveassemblies,allowing
you to eliminate both pressure and differential test gauges
81 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIEST
ES
T K
ITS
& A
CC
ES
SO
RIE
S
Part Number Qty Description
ADAPT012 1 1/8” MIP X 1/4” SAE Flare Adapter
ADAPTO25 1 1/4” MIP X 1/4” SAE Flare Adapter
ADAPTO50 1 1/2” MIP X 1/4” SAE Flare Adapter
Part Number Qty Description
BBS050 1 1/2” MIP X 1/4” FIP Bushing
BBS075 1 3/4” MIP X 1/4” FIP Bushing
Part Number Qty Description
M110631 3 1/4” NPT Quick Conn X 1/4” SAE Flare Adapter
RKQT14 3 1/4” NPT Quick Conn X 1/4” SAE Flare Adapter
M110703 3 1/2” NPT Quick Conn X 1/4” SAE Flare Adapter
RKQT12 3 1/2” NPT Quick Conn X 1/4” SAE Flare Adapter
M110704 3 3/4” NPT Quick Conn X 1/4” SAE Flare Adapter
RKQT34 3 3/4” NPT Quick Conn X 1/4” SAE Flare Adapter
Part Number Qty Description
RKQTPROMO 3 1/4” NPT Quick Conn X 1/4” SAE Flare Adapter
3 1/2” NPT Quick Conn X 1/4”FIP Bushing
3 3/4” NPT Quick Conn X 1/4” FIP Bushing
RKQTSET 3 1/4” NPT Quick Conn X 1/4” SAE Flare Adapter
3 1/2” NPT Quick Conn X 1/4” FIP Bushing
3 3/4” NPT Quick Com X 1/4” FIP Bushing
1 Plastic Carrying Case
Part Number Qty Description
M110705 3 1/4” NPT Quick Conn X 1/4”SAE Flare 90° Swivel
M110706 3 1/4” NPT Quick Conn X 1/4”SAE Flare 90º Swivel
3 1/2” NPT Quick Conn X 1/4” FIP Bushing
3 3/4” NPT Quick Conn X 1/4” FIP Bushing
ADAPT 012
BBS050
RKQT14
RKQTSET
M110706
82 [email protected] • www.bavco.com1-800-458-3492
TEST KITS & TEST KIT ACCESSORIES
THOSE5
M109445
NVO25X
NVO25
M 112418 - ADAPT FLR
Part Number Qty Description
M111887 3 1/4” Female Flare X 1/4” Male Flare
NV025 1 1/4”FIP X 1/4” FIP Needle Valve
NV025X 1 1/4 X 1/4” SAE Flare X 1/4”FIP-Bleed Off Valve
M8300001 1 1/4 X 1/4” SAE Flare X 1/8”FIP-Bleed Off Valve
M112418 1 1/4” SAE Flare Coupling
Part Number Qty Description
M111645 1 15”x5/8”DiameterTestTube-BrzBase
1 15” x 5/9” Test Tube Extension
Part Number Qty Description
THOSE 3 3’ Hose 1/4 X 1/4”SAE Flare
THOSE5 3 5’ Hose 1/4 X 1/4”SAE Flare
M109445 3 Hose 1/4 X 1/4”SAE Flare W/Inline Filters
Part Number Qty Description
M110694 1 Test Cock Cleaning Tool
HWV102 1 Hempel Lg BV Handle Tool
HWV103 1 Hempel Sm BV Handle Tool
Part Number Qty Description
276H300 1 Hose Conn Pressure Gauge W/Hi Indicator Pin
Part Number Qty Description
BFTG 1 BackflowHistoryTag
M111645
M110694
276H300
M111887
HWV102 HWV103
BFTG