Managing the Storage Infrastructure Section 4 : Storage Security and Management.
Test Facility for Thermal Energy Storage in Molten Salt (TESIS)€¦ · TESIS:storage Storage Test...
Transcript of Test Facility for Thermal Energy Storage in Molten Salt (TESIS)€¦ · TESIS:storage Storage Test...
![Page 1: Test Facility for Thermal Energy Storage in Molten Salt (TESIS)€¦ · TESIS:storage Storage Test Section Aims of the storage test section include: 4 Demonstration of single-tank](https://reader034.fdocuments.in/reader034/viewer/2022050409/5f85f9de175b9123002d92f6/html5/thumbnails/1.jpg)
Deutsches Zentrumfür Luft- und Raumfahrt German Aerospace Center
Institute of Engineering ThermodynamicsLinder Höhe, Geb. 26, 51147 KölnPfaffenwaldring 38-40, 70569 Stuttgart
Kontakt:Dr. Thomas Bauer
Phone: +49(0) 2203 601-4094 Fax: +49(0) 2203 601-4072E-mail: [email protected]: http://www.DLR.de/TTTT
-TPT
-0417-S
T-H
-020
Ther
mis
che
Pro
zess
tech
nik
Ther
mis
che
Pro
zess
tech
nik
Test Facility for Thermal Energy Storage in Molten Salt (TESIS)
TESIS:com Component Test Section
Aims of the test section include:
Test and qualification of molten 4salt components for research and in-dustry (e.g. valves, receiver tubes, measurement & control)
Examination of operational mol-4ten salt aspects (e.g. freezing events)
Operating parameters are:
Temperatures from 150 °C to 4560 °C with nitrate/nitrite salt mixtures
max. thermal gradient 50 K/s4
max. mass flow of 8 kg/s4
max. heating power 420 kW4
max. cooling power 420 kW4
TESIS:storage Storage Test Section
Aims of the storage test section include:
Demonstration of single-tank 4thermocline concept with filler for ther-mal energy storage
Research on heat and mass transfer, 4thermomechanics, material compati-bility, operational aspects, scaling is-sues and system integration
Operating parameters are:
Temperatures from 150 °C to 560 °C 4with nitrate/nitrite salt mixture
Storage capacity (ΔT=250 K): 4200 kWh/m³ with 20 m³ and 4 kg/s
Molten Salt Technology for power plants and industrial processes to increase the efficiency