NOW 30 min SDAT according to EU and US Crash Norm

• Fast safe drive away time (SDAT) of 30 min• Perfect fit for vehicles with highest rating according

to established European Crash Norm*• Re-calibration of Advanced Driver Assistance Systems

(ADAS) 30 min after bonding• HMLC (high modulus, low conductivity)

TEROSON PU 8730 HMLCDirect Glazing for Professionals

www.vehicle-repair-solutions.com

The new one component TEROSON PU 8730 HMLC will make your professional windscreen replacement job even faster and more efficient. The product is cold-applied, can be used with a powerful standard foil cartridge gun and has only 30  minutes safe drive away time which was tested and certified according to the European Crash Norm and the US Crash-Norm FMVSS 208/212*.

Find out more of the new product solution with the well known premium quality of the TEROSON brand.

* TÜV Certificate applied EU Crash Norm: 64 km/h @ 40% overlap US Crash Norm: 50 km/h @ 100% head-on (FMVSS 208/212)

Key Benefits of TEROSON PU 8730 HMLC

• One component cold applied (no warm up needed)• Very good sag resistance • High cure rate – skin formation 10 min• High elasticity and shear strength, even after aging• Primerless adhesion to residual bead• High UV resistance

over

lap

40

%

100

% fr

onta

l Im

pact

EU Norm 64 km/h, 40% overlapUS Norm 50 km/h, 100% frontal impact

AG16049_FL_TEROSON_PU_8730_HMLC_RZ.indd 1 30/8/16 10:20

Except as otherwise noted, all marks used above in this printed material are trademarks and/or registered trademarks of Henkel and/or its affiliates in the US, Germany, and elsewhere. © Henkel AG & Co. KGaA, 2016

The data contained herein are intended as reference only. Please contact Henkel Technical Support Group for assistance and recommendation on specifications for these products.

Features and Benefits

Product Order Information

The windscreen replacement kit for professionals comes with 20 x 400 ml / 20 x 600 ml foil packs and a matching quantity of foil pack nozzles for high efficiency and optimized consumption.

We recommend TEROSON PU 8519 P All-in-one Primer. It is available in 100 ml bottles, a perfect primer size for professional use. The best choice for surface pretreatment is TEROSON VR 20, available in 1 litre bottles or 10 litre canisters.

Find out more of the new product solution with the well known premium quality of the TEROSON brand.

Henkel AG & Co. KGaAHenkelstrasse 67 40589 Düsseldorf Germany Tel.: (+49) 211 797-0 www.loctite.com

Henkel AG & Co. KGaAStandort Heidelberg Henkel Teroson Strasse 57 69123 Heidelberg Germany Tel.: (+49) 6221 704-0 www.vehicle-repair-solutions.com

Henkel LtdWood Lane End, Hemel Hempstead,HertfordshireHP2 4RQTel.: (+44) 1442 278000Fax: (+49) 1442 278071www.carrepairsolutions.co.uk

Technical Data

Technology 1 component polyurethane

Application method Cold-applied (using standard foil cartridge gun)

Glazing time Max. 10 min

Drive away time

Safe drive away time (SDAT) 30 min after windscreen has been bondedCrash-Norm:EU: 64 km/h @ 40 % overlap with airbagUS: FMVSS 208/212 (50 km/h @ 100 % overlap) with airbag

Product Pack size IDH No. VE

TEROSON PU 8730 HMLC400 ml foil pack,600 ml foil pack

1883930,1981528

20 pieces,20 pieces

TEROSON PU 8519 P All-in-one Primer

100 ml bottle 1178026 10 pieces

TEROSON VR 20Surface pretreatment

1 litre bottle,10 litre canister

1696704,1471127

12 pieces,1 piece

AG16049_FL_TEROSON_PU_8730_HMLC_RZ.indd 2 30/8/16 10:20