TERMS AND CONDITIONS - Wilson Toolglobal.wilsontool.com/Mandarin/Resources/images/488.pdf · quick...

2Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510

[email protected]@[email protected]

U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

ORDER Minimum order is $50.00

CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established.

PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice.

FREIGHT Orders are shipped F.O.B. from our manufacturing facility. (International Shipments are Incoterms: Ex Works).

ORDER CANCELLATION In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and material.

RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned.

CLAIMS All claims or product shortages must be made within 30 days of the invoice date.

STANDARD PUNCH LENGTHS

16.34[ 415 ](ST)

[ 835 ]32.87(LT)

[ 835 ]32.87(XT)

1. MOST TOOLS CAN BE EASILY LOADED BY A SINGLE OPERATOR.

2. EASY TO STORE.

3. ALL SECTIONALIZED TOOLS COME PRE-CUT IN NINE DIFFERENT PIECES.

4. MOST SECTIONALIZED PUNCHES INCLUDE TWO EAR PIECES (HORNS).

5. NITREX™ (HRC-70) IS STANDARD ON EVERY DIE IN THE TOOLING LINE.

6. SPECIAL TOOLING AVAILABLE. PLEASE CONTACT THE APPLICATION SALES DESK.

Note: Special lengths are available at additional cost.

16.34[ 415 ]

(ST)

[ 835 ]32.87(LT)

[ 835 ]32.87(XT)

STANDARD DIE LENGTHS

SECTION WIDTHS:LEFT EAR / RIGHT EAR.394" (10mm).591" (15mm).787" (20mm)1.575" (40mm)1.969" (50mm) 3.937" (100mm) LEFT EAR3.937” (100mm) RIGHT EAR7.874" (200mm) 11.811" (300mm)

TERMS AND CONDITIONS

3

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

TABLE OF CONTENTS

Bending Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Wilson Express Clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Punches 88°/ 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Gooseneck Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

88º & 90º Narrow Punch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sash Punches 88°/ 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Acute-Angle Punches 30°/ 60° . . . . . . . . . . . . . . . . . . . . . . . 13-14

Large Radius Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Punches 75° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17

2V Dies Quick Change 75° . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2V Dies Quick Change 88°/ 90° . . . . . . . . . . . . . . . . . . . . . . . . . 19


2V Dies Quick Change Large Shoulder Radii. . . . . . . . . . . . . . . . . 21

2V Dies 30º Acute Angle Quick Change. . . . . . . . . . . . . . . . . . . . 21

2V Dies Bolt Down (Old Style) . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2V Dies Large Shoulder Radii (Old Style). . . . . . . . . . . . . . . . . . . 23

2V Dies Sectionalized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25

Urethane Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

2V Dies Rails and Holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1V Dies Quick Change 88°/ 900 . . . . . . . . . . . . . . . . . . . . . . . . . 28

1V Dies Quick Change Low Profile 88°/ 900 . . . . . . . . . . . . . . . . 28

1V Dies Quick Change Acute Angle 30° . . . . . . . . . . . . . . . . . . . 29


1V Dies Quick Change Holder and Wedge Block . . . . . . . . . . . . . . 31

1V Dies Acute Angle 30°/45° . . . . . . . . . . . . . . . . . . . . . . . . . . 32

1V Dies 85º Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34

1V Dies 80° and Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

1V Dies 4 Way Die . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Rail Style Offset Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Flattening Dies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Flattening Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Two Stage Hemming Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Replacement V-Blocks for Wilson Hemming Dies . . . . . . . . . . . . . 39

Two Stage Hemming Punch & Die . . . . . . . . . . . . . . . . . . . . . . . . 40

Z1 /Z2 Narrow Punch Holders . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Z2 Style Deep Punch Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Stacking Punch Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Dual Clamping Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

European Punch and Die Adapters . . . . . . . . . . . . . . . . . . . . . . . 44

Urethane Holders & Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SPECIAL EAR PIECE

When ordering a special ear section from Wilson Tool, please indicate the following dimensions.

“C”

“W”

“A”

R.375

“B”

4Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

5.118[ 130 ]

STANDARD PUNCHESPAGE

QUICK CHANGE 2V DIESPAGE

2V DIE HOLDERSPAGE

DIE RAILPAGE

100



2V DIE HOLDERSPAGE

2V DIE RAILPAGE

90 DEGREE BENDING(27 GA - 10 GA)


2V DIE HOLDERSPAGE

DIE RAILPAGE

NARROW PUNCHESPAGE

500

NARROW PUNCHESPAGE


2V DIE HOLDERSPAGE

2V DIE RAILPAGE

90 DEGREE BENDINGWITH NARROW PUNCH

STANDARD PUNCHESWITH THIN TIPPAGE


2V DIE HOLDERSPAGE

DIE RAILPAGE

200

STANDARD PUNCHESWITH THIN TIPPAGE


2V DIE HOLDERS PAGE

2V DIE RAIL PAGE

90 DEGREE BENDINGWITH THIN TIP PUNCH

LARGE 1V DIESPAGE

LARGE RADIUS PUNCHESPAGE

1200


LARGE 1V DIESPAGE

LARGERADIUS BENDING


LARGE 1V DIESPAGE

1300


LARGE 1V DIESPAGE

90 DEGREE BENDING(3/8" - 1/2")

DEEP GOOSENECK PUNCHESPAGE

2V DIESPAGE

2V DIE HOLDERSPAGE

300

2V DIESPAGE

GOOSENECK PUNCHESPAGE

2V DIE HOLDERSPAGE

90 DEGREE BENDING WITH GOOSENECK PUNCH

these are the right size

EXTRA PARTS

5.118[ 130 ]

NARROW 1V DIEHOLDERSPAGE

NARROW 1V DIESPAGE

SASH PUNCHESPAGE

600

SASH PUNCHESPAGE


QUICK CHANGE 1V DIE HOLDERSPAGE

90 DEGREE BENDING(SASH)

GOOSENECK PUNCHESWITH THIN TIPPAGE


2V DIE HOLDERSPAGE

DIE RAILPAGE

400

90 DEGREE BENDING WITHTHIN TIP GOOSENECK PUNCH


2V DIE HOLDERSPAGE

2V DIE RAILPAGE

GOOSENECK PUNCHESWITH THIN TIPPAGE


URETHANE PADSPAGE

URETHANE HOLDERSPAGE

1500


URETHANE PADSPAGE

URETHANE HOLDERSPAGE

BENDING DIAGRAMS

5

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

OFFSET TOOLSPAGE

2V DIE HOLDERSPAGE

DIE RAILPAGE

1800

OFFSET BENDING(27 GA - 16 GA)

RAIL STYLE OFFSET TOOLSPAGE

2V DIE HOLDERSPAGE

2V DIE RAILPAGE

FLATTENING PUNCHESPAGE

FLATTENING DIESPAGE

1100

HEMMING(27 GA - 11 GA)


FLATTENING DIESPAGE

3V HEMMING DIESPAGE


1000 HEMMING(27 GA - 16 GA)


3V HEMMING DIESPAGE

ACUTE ANGLE PUNCHESPAGE

HEMMING DIES

STEP 1

PAGE

STEP 2

800

HEMMING (2 STAGE)(27 GA - 14 GA)

ACUTE ANGLE PUNCHES PAGE

STEP 1

STEP 2

HEMMING DIESPAGE


EXTRA PARTS

5.118[ 130 ]


LARGE 1V DIESPAGE

90090 DEGREE BENDING(9 GA - 3/8")


LARGE 1V DIESPAGE


ACUTE ANGLE LARGE1V DIESPAGE

1400ACUTE-ANGLE BENDING(12 GA - 6 GA)


ACUTE ANGLE LARGE 1V DIESPAGE

DEEP PUNCH HOLDERPAGE


1600

DEEP PUNCH HOLDER

DEEP PUNCH HOLDERPAGE



ACUTE ANGLE QUICKCHANGE 2V DIESPAGE

2V DIE RAILSPAGE

2V DIE HOLDERSPAGE

700

ACUTE-ANGLE BENDING(27 GA - 14 GA)


ACUTE ANGLE QUICKCHANGE 2V DIEPAGE

2V DIE RAILPAGE

2V DIE HOLDERSPAGE

STANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERSPAGE

STACKING PUNCH HOLDEROR NARROW PUNCH HOLDERSPAGE


LOW PROFILE NARROW1V DIESPAGE

NARROW 1V DIE HOLDERSPAGE

1900DEEP BOX BENDING

STANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERS PAGE


LOW PROFILE QUICK CHANGE 1V DIES PAGE

QUICK CHANGE 1V DIE HOLDERS PAGE

STACKING PUNCH HOLDER PAGE

NARROW PUNCH HOLDER PAGE

BENDING DIAGRAMS

6Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

WILSON EXPRESS CLAMPING SYSTEMC

LAM

PIN

G

Z2 SERIES WITH WEDGE HEIGHT PRICE

43818 -2 2 Front Clamp Plates 120mm

438181 2 Front & 2 Back Clamp Plates 120mm

CONVENTIONAL PRESS BRAKES WITH WEDGE HEIGHT PRICE

43815-2 2 Front Clamp Plates 100mm


Z1 SERIES WITH WEDGE HEIGHT PRICE

43817 -2 2 Front Clamp Plates 100mm


TRUMPF PRESS BRAKES WITH WEDGE HEIGHT PRICE

43819-2 2 Front Clamp Plates 100mm


7

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

88° & 90° PUNCHES

R .354[ 9 ]

R .197[ R 5 ]

.394[ 10 ]

1.378[ 35 ]

1.181[ 30 ]

"H"

1.378[ 35 ]

Part No. 40002

(Ear Pirce)

A

(Ear Piece)

Part No. 40212

"H"

R.158

[ 4.02 ]

.394[ 10 ].197

[ 5 ]

R .197[ R 5 ]

.394[ 10 ]

(Ear Piece)

1.181[ 30 ]

A

(Ear Piece)

Part No. 40212

"H"

R.158

[ 4.02 ]

.394[ 10 ].197

[ 5 ]

R .197[ R 5 ]

.394[ 10 ]

(Ear Piece)

1.101[ 27.97]

A

R .354[ 9 ]

R .197[ R 5 ]

.394[ 10 ]

1.378[ 35 ]

1.101[ 27.97]

"H"

1.378[ 35 ]

Part No. 40002

(Ear Pirce)

A

THIN TIP

Cat. No. A Angle

R Tip Radius

inch [mm]

H Height inch [mm]

Max TonFeet /Meter

(LT & ST)

Max TonFeet /Meter

(XT)

LT32.87"[835mm]

ST16.34"[415mm]

XT32.87"[835mm]

40002 88˚ .008 [0.2] 2.634 [66.9] 30 / 100 14 / 4740008 88˚ .030 [0.8] 2.624 [66.6] 30 / 100 14 / 4740015 88˚ .060 [1.5] 2.612 [66.3] 30 / 100 14 / 4740023 88˚ .090 [2.3] 2.598 [66.0] 30 / 100 14 / 4740030 88˚ .120 [3.0] 2.586 [65.7] 30 / 100 14 / 4740102 90˚ .008 [0.2] 2.634 [66.9] 30 / 100 14 / 4740108 90˚ .030 [0.8] 2.624 [66.7] 30 / 100 14 / 4740115 90˚ .060 [1.5] 2.613 [66.4] 30 / 100 14 / 4740123 90˚ .090 [2.3] 2.600 [66.0] 30 / 100 14 / 4740130 90˚ .120 [3.0] 2.588 [65.7] 30 / 100 14 / 47

Cat. No. A Angle

R Tip Radius

inch [mm]

H Height inch [mm]

Max TonFeet /Meter

(LT & ST)

Max TonFeet /Meter

(XT)

LT32.87"[835mm]

ST16.34"[415mm]

XT32.87"[835mm]

40212 88˚ .008 [0.2] 2.634 [66.9] 12 / 40 3 / 1040202 90˚ .008 [0.2] 2.634 [66.9] 12 / 40 3 / 10

Note: Punch tip modifications and punch relief available at an additional cost. Contact application sales desk for pricing and lead times.

STANDARD TIP PU

NC

HE

S

8Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

Part No. 40402

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394 (Ear Piece)[ 10 ]


1.181[ 30 ]

A(Ear Piece)

Part No. 40402

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394 (Ear Piece)[ 10 ]


1.101[ 27.97]

A

.354[ 9 ]

.394[ 10 ]

R .197[ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

Part

No.

403

02

(Ear Piece)R

"H"

1.181[ 30 ]

A

(Ear Piece)

.354[ 9 ]

.394[ 10 ]

R .197[ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

Part

No.

403

02

(Ear Piece)R

"H"

1.101[ 27.97]

A

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

40402 88° .008 [0.2] 4.130 [104.9] 15 / 50 14 / 47

40408 88° .030 [0.8] 4.120 [104.6] 15 / 50 14 / 47

40415 88° .060 [1.5] 4.108 [104.3] 15 / 50 14 / 47

40430 88° .120 [3.0] 4.082 [103.7] 15 / 50 14 / 47

40502 90° .008 [0.2] 4.130 [104.9] 15 / 50 14 / 47

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

40302 88˚ .008 [0.2] 4.721 [119.9] 15 / 50

40308 88˚ .030 [0.8] 4.711 [119.7] 15 / 50


GOOSENECK PUNCHESP

UN

CH

ES

88º

88º & 90º

9

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

.984[ 25 ]

.394[ 10 ]

R .394[ R 10 ]

1.181[ 30 ]

"H"

R.236[ 6 ]

WT-40702

1.181[ 30 ]

A

(Ear Piece)

.984[ 25 ]

.394[ 10 ]

R .394[ R 10 ]

1.181[ 30 ]

"H"

R.236[ 6 ]

WT-40702

1.101[ 27.97]

A

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

40702 88° .008 [0.2] 3.539 [89.9] 15 / 50 9 / 3040708 88° .030 [0.8] 3.529 [89.6] 15 / 50 9 / 3040712 90° .008 [0.2] 3.539 [89.9] 15 / 50 9 / 3040718 90° .030 [0.8] 3.530 [89.7] 15 / 50 9 / 30


GOOSENECK PUNCHES

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394[ 10 ]

WT-40602

1.181[ 30 ]

A

(Ear Piece)

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394[ 10 ]

WT-40602

1.101[ 27.97]

A

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

40602 88° .008 [0.2] 3.539 [89.9] 21 / 70 14 / 47

40608 88° .030 [0.8] 3.529 [89.6] 21 / 70 14 / 47

40615 88° .060 [1.5] 3.517 [89.3] 21 / 70 14 / 47

40630 88° .120 [3.0] 3.491 [88.7] 21 / 70 14 / 47

PU

NC

HE

S

88ºSTANDARD TIP

88º& 90 THIN TIP

10Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

.787 [20]

9.568 [243]THEO. SHARP

.751 [19.1]

R

A

.925 - .950[23.5 - 24.1]

Reference only,Varies by angleand radius.

1.101[ 27.97]

Note: This punch mounts to Z2 upper beam. Please call sales desk for further explanation.

CAT.NOA

ANGLE

RTIP RADIUS

INCHES [mm]

Max. TonFt/Meter

(ST)

PRICE(ST)

43080c 85˚- 90˚ .008 - .7 [0.2 - 17.75] 25 / 83

GOOSENECK PUNCHESP

UN

CH

ES

85º & 90º Z2 STYLE

11

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

"H"

.590[ 15 ]R .394

[ 10 ]

R .197 [ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

44540

EAR PIECE

1.181[ 30 ]

A

(Ear Piece)

"H"

.590[ 15 ]R .394

[ 10 ]

R .197 [ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

44540

EAR PIECE

1.101[ 27.97]

A

2.756[ 70 ] .236

[ 6 ]

"H"

R

WT-40902

1.101[ 27.97]

A

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44540 85° .188 [4.8] 4.134 [105.0] 30 / 100 14 / 47

44560 85° .250 [6.4] 4.105 [104.3] 30 / 100 14 / 47

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

40802 88˚ .008 [0.2] 3.740 [95.0] 15 / 50

40902 90° .008 [0.2] 3.740 [95.0] 15 / 50

Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Punch tip modifications and punch relief available at an additional cost. Contact application sales desk for pricing and lead times.

PUNCHESP

UN

CH

ES

85º GOOSENECK

88º& 90 NARROW

12Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

R .394[ R 10 ]

.984[ 25 ]

.394[ 10 ]

.394[ 10 ]

"H"

.315[ 8 ]

R.788[ 20 ]

WT-41002

1.181[ 30 ]

A

R .394[ R 10 ]

.984[ 25 ]

.394[ 10 ]

.394[ 10 ]

"H"

.315[ 8 ]

R.788[ 20 ]

WT-41002

1.101[ 27.97 ]

A

.394[ 10 ]

"H"

.315[ 8 ]

R

.984[ 25 ]

R .394[ R 10 ]

.394[ 10 ]

.788[ 20 ]

WT-41202

1.101[ 27.97 ]

A

(Ear Piece)

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41002 88˚ .008 [0.2] 3.933 [99.9] 10 / 30

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41102 88˚ .008 [0.2] 2.752 [69.9] 10 / 30

41202 90˚ .008 [0.2] 2.752 [69.9] 10 / 30


.394[ 10 ]

"H"

.315[ 8 ]

R

.984[ 25 ]

R .394[ R 10 ]

.394[ 10 ]

.788[ 20 ]

WT-41202

1.101[ 27.97 ]

A

SASH PUNCHESP

UN

CH

ES

88º

88º & 90º

13

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

"H"

R

.788[ 20 ]

R .315[ R 8 ]

.472[ 12 ]

.709[ 18 ]

WT-41308

1.101[ 27.97 ]

A

"H".788[ 20 ]

R .315[ R 8 ]

.472[ 12 ]

.788[ 20 ]

41908

R .709[ 18 ](Ear Piece)

1.101[ 27.97]

A

(Ear Piece)

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41315 30˚ .060 [1.5] 4.016 [102.0] 30 / 100

41322 30˚ .090 [2.3] 3.927” [99.7] 30 / 100

41330 30˚ .120 [3.0] 3.846 [97.7] 30 / 100

CAT.NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41908 30° .030 [0.8] 4.095 [104.0] 30 / 100

Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost.

Punch tip modifications and punch relief available at an additional cost. Contact application sales desk for pricing and lead times.

ACUTE-ANGLE PUNCHESP

UN

CH

ES

30º

14Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

Part No. 42610

"H"

.718[ 18.24 ]

R

1.101[ 27.97 ]

A

"H"

R

WT-41440

1.101[ 27.97 ]

A

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42610 30˚ .030 [0.8] 2.579 [65.5] 30 / 100

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41440 60˚ .188 [4.8] 2.607 [66.2] 30 / 100

41460 60˚ .236 [6.0] 2.559 [65.0] 30 / 100

Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost (44010). Punch tip modifications and punch relief available at an additional cost. Contact application sales desk for pricing and lead times.

ACUTE-ANGLE PUNCHESP

UN

CH

ES

60º

30º

15

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

"H"

R .875[ R 22.2 ]

WT-41722

1.101[ 27.97 ]

"H"

R 1.000[ R 25.4 ]

WT-41725

1.101[ 27.97 ]

"H"

R .375 [ R 9.5 ]

WT-41709

1.101[ 27.97 ]

"H"

R .500 [ R 12.7 ]

WT-41712

1.101[ 27.97 ]

"H"

R .625[ R 15.9 ]

WT-41715

1.101[ 27.97 ]

"H"

R .750[ R 19 ]

WT-41719

1.101[ 27.97 ]

41709

41719

41712

41722 41725

CAT. NOH

HEIGHTINCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41709 3.268 [83.0] 30 / 100

41712 3.504 [89.0] 30 / 100

41715 3.425 [87.0] 30 / 100

41719 3.583 [91.0] 30 / 100

41722 3.701 [94.0] 30 / 100

41725 3.780 [96.0] 30 / 100

41715

Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Additional radii available, please contact our application sales desk.

LARGE RADIUS PUNCHESP

UN

CH

ES

16Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

R .197[ R 5 ]

1.378[ 35 ]

"H"

.377[ 9.6 ]

R

1.378[ 35 ]

.394[ 10 ]

44000

1.181[ 30 ]

A

(Ear Piece)

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44030

1.181[ 30 ]

A

(Ear Piece)

R .197[ R 5 ]

1.378[ 35 ]

"H"

.377[ 9.6 ]

R

1.378[ 35 ]

.394[ 10 ]

44000

1.101[ 27.97]

A

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44030

1.101[ 27.97 ]

A

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44000 75° .030 [0.8] 2.662 [67.6] 30 / 100 14 / 47

44001 75° .060 [1.5] 2.645 [67.2] 30 / 100 14 / 47

44003 75° .120 [3.0] 2.607 [66.2] 30 / 100 14 / 47

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44030 75˚ .030 [0.8] 4.724 [120.0] 15 / 50

44031 75˚ .060 [1.5] 4.707 [119.5] 15 / 50

44033 75˚ .120 [3.0] 4.669 [118.6] 15 / 50


75° PUNCHESP

UN

CH

ES

GOOSENECK

STANDARD

17

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44020

1.181[ 30 ]

A

(Ear Piece)

(Ear Piece)

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44020

1.101[ 27.97 ]

A

R

"H"

.187[ 4.8 ]

44010

1.101[ 27.97 ]

A

.394[ 10 ]

"H"

1.101[ 27.97 ]

.394[ 10 ]

A

44010 44040

“B”( T.S. ).394

[ 10 ]

1.378[ 35 ]R .197

[ R 5 ]

CAT. NO A ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44020 75° .030 [0.8] 3.543 [90.0] 21 / 70 14 / 47

CAT. NOA

ANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(LT & ST)

MAX. TONFT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44010 75° .030 [0.8] 3.740 [95.0] 15 / 50 15 / 50

44040 75° .030 [0.8] 6.299 [160.0] 15 / 50 14 / 47

Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost (44010). Punch tip modifications and punch relief available at an additional cost. Contact application sales desk for pricing and lead times.

75° PUNCHESP

UN

CH

ES

NARROW LARGE GOOSENECK

GOOSENECK

18Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

44102

1.811[ 46 ]

.630[ 16 ]

.442[ 11.2 ]

.394[ 10 ]

.304[ 7.7 ]

.593[ 15.1 ]

.512[ 13 ]

1.770 [ 45 ]

.256[ 6.5 ]

R .098[ R 2.5 ]

.512[ 13 ]

R .138[ R 3.5 ]

44100

1.811[ 46 ]

.787[ 20 ]

.530[ 13.5 ]

.236[ 6 ]

.206[ 5.2 ]

.593[ 15.1 ]

.512[ 13 ]

1.760 [ 44.7 ]

.256[ 6.5 ]

R .059[ R 1.5 ]

.512[ 13 ]

R .157[ R 4 ]

44101

1.811[ 46 ]

.866[ 22 ]

.580[ 14.7 ]

.394[ 10 ]

.304[ 7.7 ]

.593[ 15.1 ]

.512[ 13 ]

1.908 [ 48.5 ]

.256[ 6.5 ]

R .098[ R 2.5 ]

.512[ 13 ]

R .177[ R 4.5 ]

44102

1.811[ 46 ]

.984[ 25 ]

.658[ 16.7 ]

.472[ 12 ]

.354[ 9 ]

.593[ 15.1 ]

.512[ 13 ]

2.035 [ 51.7 ]

.256[ 6.5 ]

[ R 3 ]

.512[ 13 ]

R .216[ R 5.5 ]

44103

R .118

44100 44101

44103

CAT. NO ANGLEMAX. TONFT / METER

(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44100 75˚ 30 / 100 .394 [10.0] .630 [16.0]

44101 75˚ 30 / 100 .236 [6.0] .787 [20.0]

44102 75˚ 30 / 100 .394 [10.0] .866 [22.0]

44103 75˚ 30 / 100 .472 [12.0] .984 [25.0]

Note: V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2V dies provides HRC-70.

QUICK CHANGE 2V DIES

75º

DIE

S

19

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

R .016[ R 0.4 ]

1.358[ 34.5 ]

.593[ 15.05 ].256

[ 6.5 ]

.512[ 13 ]

.512[ 13 ]

1.811[ 46 ]

.276[ 7 ]

.158[ 4 ]

.138[ 3.5 ]

.197[ 5 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ] .512

[ 13 ].512[ 13 ]

R. 016[ R 0.4 ]

R .024[ R 0.6 ]

1.457[ 37 ]

.593[ 15.05 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

.256[ 6.5 ]

( 2 ) ( 2 )

1.811[ 46 ]

R .031[ R 0.8 ]

.512[ 13 ]

.256[ 6.5 ]

1.536[ 39 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

.217[ 5.5 ]

.512[ 13 ]

.593[ 15.05 ]

R .019[ R 0.5 ]

( 2 ) ( 2 ) 1.811[ 46 ]

R .019[ R 0.5 ]

.512[ 13 ]

1.772[ 45 ]

.709[ 18 ]

.413[ 10.5 ]

.335[ 8.5 ]

.551[ 14 ]

.593[ 15.05 ]

.256[ 6.5 ]

.512[ 13 ]

( 4 )

42001

42003

42008 42000 88˚ 90˚

42009 42002 88˚ 90˚


(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42000 90˚ 18 / 60 .158 [4.0] .276 [7.0]

42008 88˚ 18 / 60 .158 [4.0] .276 [7.0]

42001 90˚ 21 / 70 .236 [6.0] .394 [10.0]

42002 90˚ 24 / 80 .315 [8.0] .472 [12.0]

42009 88˚ 24 / 80 .315 [8.0] .472 [12.0]

42003 90˚ 30 / 100 .551 [14.0] .709 [18.0]



88º & 90º

DIE

S

20Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.811[ 46 ]

.512[ 13 ]

.512[ 13 ]

1.772[ 45 ]

.413[ 10.5 ]

.709[ 18 ]

.551[ 14 ]

.335[ 8.5 ]

.256[ 6.5 ]

R .019[ R 0.5 ]

.593[ 15.05 ]

( 4 ) 1.811

.512[ 13 ]

.512[ 13 ]

1.792[ 45.5 ]

.593[ 15.05 ]

.787[ 20 ]

.472[ 12 ]

.295[7.5]

.472[ 12 ]

[ 46 ]

R .019[ R 0.5 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ]

.256[ 6.5 ]

R .031[ R 0.8 ]

.512[ 13 ]

1.969[ 50 ]

.593[ 15.05 ]

.571[ 14.5 ]

.984[ 25 ]

.630[ 16 ]

.374[ 9.5 ]

( 4 )

.512[ 13 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

1.811[ 46 ]

R .024[ R 0.6 ]

.512[ 13 ]

.256[ 6.5 ]

1.457[ 37 ]

.512[ 13 ]

.593[ 15.1 ]

R .016[ R 0.4 ]

42007

42004

42006

42005

42007


(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42004 88˚ 30 / 100 .551 [14.0] .709 [18.0]

42005 88˚ 30 / 100 .472 [12.0] .787 [20.0]

42006 88˚ 30 / 100 .630 [16.0] .984 [25.0]

42007 88˚ 21 / 70 .236 [6.0] .394 [10.0]



88º

DIE

S

21

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.811[ 46 ]

( 2 )

R .059[ R 1.5 ]

.256[ 6.5 ] 1.575

[ 40 ]

.593[ 15.05 ]

.315[ 8 ]

.394[ 10 ]

.236[ 6 ]

R .098[ R 2.5 ]

.512[ 13 ]

.236[ 6 ]

.512[ 13 ]

( 2 )

1.969[ 50 ]

.512[ 13 ]

.512[ 13 ]

.593[ 15.05 ]

1.969[ 50 ]

R .039[ R 1 ]

.591[ 15 ]

.394[ 10 ]

.236[ 6 ]

.354[ 9 ]

( 4 )

.256[ 6.5 ]

1.969[ 50 ]

( 4 )

.472[ 12 ]

.709[ 18 ]

.315[ 8 ]

.571[ 14.5 ]

R .039[ R 1 ]

.593[ 15.05 ]

.512[ 13 ]

2.303 [ 58.5 ]

.256[ 6.5 ]

.512[ 13 ]

1.811[ 46 ]

( 2 )

.256[ 6.5 ]

1.969[ 50 ]

.512[ 13 ]

.551[ 14 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

R .118[ R 3 ]

R .158[ R 4 ]

.512[ 13 ]

( 2 )

[ 15.05 ].593

1.811[ 46 ]

.394[ 10 ]

.315[ 8 ]

.236[ 6 ]

.236[ 6 ]

.593[ 15.1 ]

.512[ 13 ]

1.575 [ 40 ]

.256[ 6.5 ]

R .059[ R 1.5 ]

.512[ 13 ]

R .098[ R 2.5 ]

42012

42010

42020

42012

42021

42011

Note: V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.

Nitrex standard on all Quick Change 2V dies provides HRC-70.


(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42010 90˚ 24 / 80 .236 [6.0] .394 [10.0]

42012 88˚ 24 / 80 .236 [6.0] .394 [10.0]

42011 88˚ 30 / 100 .472 [12.0] .787 [20.0]


(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42020 30˚ 9 / 30 .236 [6.0] .394 [10.0]

42021 30˚ 9 / 30 .315 [8.0] .472 [12.0]



LARGE SHOULDER RADII

30º ACUTE ANGLE

DIE

S

22Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.024[ 26 ]

( 4 )

R .016[ R 0.4]

1.969[ 50 ]

.138[ 3.5 ]

.197[ 5 ]

.276[ 7 ]

.158[ 4 ]

1.024[ 26 ]

( 2 )( 2 )

R .016[ R 0.4 ]

R .024 [ R 0.6 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

1.969[ 50 ]

1.024[ 26 ]

1.969[ 50 ]

R .031[ R 0.8 ]

R .020 [ R 0.5 ]

.217[ 5.5 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

( 2 ) ( 2 )

1.024[ 26 ]

1.969[ 50 ]

R .020[ R 0.5 ]

.413[ 10.5 ]

.709[ 18 ]

.551[ 14 ]

.335[ 8.5 ]

( 4 )

1.969[ 50 ]

R .020[ R 0.5 ]

.709[ 18 ]

.413[ 10.5 ]

.551[ 14 ]

.335[ 8.5 ]

1.024[ 26 ]

( 4 )

1.024[ 26 ]

R .031[ R 0.8 ]

1.969[ 50 ]

.374[ 9.5 ]

.630[ 16 ]

.984[ 25 ]

.571[ 14.5 ]

( 4 )

1.024[ 26 ]

( 4 )

R .020[ R 0.5 ]

1.969[ 50 ]

.472[ 12 ]

.787[ 20 ]

.472[ 12 ]

.295[ 7.5 ]

42030

42032 42034

42036

42031

42033

42035

CAT. NO A ANGLEMAX. TONFT / METER

(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

42030 90˚ 18 / 60 .158 [4.0] .276 [7.0]

42031 90˚ 21 / 70 .236 [6.0] .394 [10.0]

42032 90˚ 24 / 80 .315 [8.0] .472 [12.0]

42033 90˚ 30 / 100 .551 [14.0] .709 [18.0]

42034 88˚ 30 / 100 .551 [14.0] .709 [18.0]

42035 88˚ 30 / 100 .472 [12.0] .787 [20.0]

42036 88˚ 21 / 70 .630 [16.0] .984 [25.0]

Note: All mounting hardware is included. V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2V dies provides HRC-70.

2V DIES

BOLT DOWN OLD STYLE

DIE

S

23

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.024[ 26 ]

R .059[ R 1.5 ]

2.165[ 55 ]

R .098[ R 2.5 ]

( 2 ) ( 2 )

.394[ 10 ]

.236[ 6 ]

.236[ 6 ]

.394[ 10 ]

2.165[ 55 ]

R .157[ R 4 ]

.591[ 15 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

R .118[ R 3 ][ 26 ]

1.024

( 2 )( 2 )

1.811[ 46 ]

R .016 [ R 0.4 ]

.276[ 7 ]

.197[ 5 ]

.138[ 3.5 ]

.158[ 4 ]

.256[ 6.5 ] 1.969

[ 50 ]

.593[ 15.05 ]

( 4 )1.811[ 46 ]

( 2 ) ( 2 )

.256[ 6.5 ]

R .016[ R 0.4 ]

R .023[ R 0.6 ]

.394[ 10 ]

.256[ 6.5 ]

.177[ 4.5 ]

.236[ 6 ]

.593[ 15.05 ]

1.969[ 50 ]

42040

42050

42041

42051


(LT, ST & XT)

V1INCHES [mm]

V2INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

42040 90˚ 24 / 80 .236 [6.0] .394 [10.0]

42041 88˚ 30 / 100 .472 [12.0] .787 [20.0]


(XT)

V1INCHES [mm]

V2INCHES [mm]

XT32.87"

(835mm)

42050 90˚ 18 / 60 .158 [4.0] .276 [7.0]

42051 90˚ 21 / 70 .236 [6.0] .394 [10.0]

Note: All mounting hardware is included. V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2V dies provides HRC-70.

2V DIES

LARGE SHOULD RADII OLD STYLE

SECTIONALIZED OLD STYLE

DIE

S

24Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096


1.811[ 46 ]

.256[ 6.5 ]

R .020[ R 0.5 ]

R .031[ R 0.8 ]

.593[ 15.05 ]

1.969[ 50 ]

.295[ 7.5 ]

.217[ 5.5 ]

.472[ 12 ]

.315[ 8 ]

( 2 ) ( 2 ) 1.811[ 46 ]

.256[ 6.5 ]

.593[ 15.05 ]

1.969[ 50 ]

.551[ 14 ]

.335[ 8.5 ]

.413[ 10.5 ]

.709[ 18 ]

R .020[ R 0.5 ]

( 4 )

1.811[ 46 ]

R .020[ R 0.5 ]

.593[ 15.05 ]

1.969[ 50 ]

.295[ 7.5 ]

.472[ 12 ]

.787[ 20 ]

.472[ 12 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ]

R .031[ R 0.8 ]

.984[ 25 ]

.630[ 16 ]

.256[ 6.5 ]

1.969[ 50 ]

.593[ 15.05 ]

.374[ 9.5 ]

.571[ 14.5 ]

( 4 )

42052

42056

42054 42053 880 900

42055


(XT)

V1INCHES [mm]

V2INCHES [mm]

XT32.87"

(835mm)

42052 90˚ 21 / 70 .315 [8.0] .472 [12.0]

42053 90˚ 30 / 100 .551 [14.0] .709 [18.0]

42054 88˚ 30 / 100 .551 [14.0] .709 [18.0]

42055 88˚ 30 / 100 .472 [12.0] .787 [20.0]

42056 88˚ 30 / 100 .630 [16.0] .984 [25.0]

SECTIONALIZED 2V DIES

SECTIONALIZED OLD STYLE

DIE

S

25

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1.969[ 50 ]

R .023[ R 0.6 ]

.177[ 4.5 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

R .016[ R 0.4 ]

1.969[50]

1.969[50]

.630[ 16 ]

1.969[50]

.593[ 15.05 ]

( 2 )( 2 )

.256[ 6.5 ]

.236[ 6 ]

R .059[ R 1.5 ]

(2)

.236[ 6 ]

R .098[ R 2.5 ]

(2)

.394[ 10 ]

.394[ 10 ]

1.811[ 46 ]

.256[ 65 ]

.593[ 15.05 ]

2.165[ 55 ]

2.165[ 55 ]

.593[ 15.05 ]

R .157[ R 4 ]

.591[ 15 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

1.811[ 46 ]

R .118[ R 3 ]

( 2 )( 2 )

.256[ 6.5 ]

.630[ 16 ]

R .019[ R 0.5 ]

.256[ 6.5 ]

R .031[ R 0.8 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

1.969[ 50 ]

.593[ 15.05 ]

( 2 )( 2 )

.217[ 5.5 ]

42070

42061

42071

42062


(XT)

V1INCHES [mm]

V2INCHES [mm]

XT32.87"

(835mm)

42070 90˚ 24 / 80 .236 [6.0] .394 [10.0]

42071 88˚ 30 / 100 .472 [12.0] .787 [20.0]


(XT)

V1INCHES [mm]

V2INCHES [mm]

XT32.87"

(835mm)

42061 90˚ 21 / 70 .236 [6.0] .394 [10.0]

42062 90˚ 21 / 70 .315 [8.0] .472 [12.0]


SECTIONALIZED 2V DIES

LARGE SHOULDER RADIIOLD STYLE

LOW PROFILEOLD STYLE

DIE

S

26Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

URETHANE DIESU

RE

THA

NE

DIE

S

CAT. No. ANGLE V1Opening

V2Opening

HHeight

WWidth

PRICEL

PRICES

42001ue 900 .23" [6] .39" [10] 1.81" [46] 1.77" [45]42002ue 900 .31" [8] .47" [12] 1.81" [46] 1.77” [45]42004ue 880 .55" [14] .70" [18] 1.81" [46] 2.36” [60]42005ue 880 .47" [12] .78" [20] 1.81" [46] 2.36” [6042006ue 880 .63" [16] .98" [25] 1.81" [46] 2.61" [66.5]42021ue 300 .31" [8] .47" [12] 1.81" [46] 2.36” [60

1.77[45]

1.81[46]

.31[8]

.47[12]

.51[13]

.47[12]

.78[20]

1.81[46]

2.36[60]

.51[13]

.51[13]

1.81[46]

2.36[60]

.31[8]

.47[12]

.23[6]

.39[10]

1.81[46]

1.77[45]

.51[13]

.51[13]

.51[13]

2.36[60]

1.81[46]

.55[14]

.70[18]

1.81[46]

2.61[66.5]

.63[16]

.98[25]

900 900

300

880

880 880

42001ue 42002ue 42004ue

42005ue 42006ue 42021ue

.51[13]

.51[13]

.51[13]

.51[13]

.51[13]

.51[13]

27

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

2V DIE RAILS AND HOLDERSR

AILS

& H

OLD

ER

S

END VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEW

CAT. NO L 32.87" (835mm)

S 16.34" (415mm)

42089 [28-32 HRc] $254 $141

42090 [48-54 HRc] $367 $226

CAT. NO Price

43553 $52

.591[ 15 ]

["X"]

.592

1.969[ 50 ]

[15 ].276[ 7 ]

CAT. NO HEIGHTRANGE

L 32.87"

(835mm)

S 16.34"

(415mm)

X32.87"

(835mm)

42091 X= .575 - 1.250 $648 $487 $868

42092 X= 1.251 - 2.000 $655 $498 $887

42093 X= 2.001 - 2.750 $692 $512 $906

“H”

2.362[60]

.500

“H”

2.362[60]

CAT. NOH

HEIGHT INCHES [mm]

L 32.87"

(835mm)

S 16.34"

(415mm)

43021 AT 1.536 [39mm] $455 $327

43022 AT 1.772 [45mm] $488 $350

43023 AT 2.953 [75mm] $732 $589

CAT. NOH

HEIGHT INCHES [mm]

L 32.87"

(835mm)

S 16.34"

(415mm)

43021 1.536 [39mm] $324 $207

43022 1.772 [45mm] $356 $228

43023 2.953 [75mm] $601 $467

07.21005.

78.51.625

602.362

31215.

07.21005.

78.51.625

602.362

31215.

RAILS

STACKING RAILS

AMERICAN TO EUROPEAN RAIL ADAPTERFOR QUICK CHANGE 2V DIES

HOLDERS

CAT. NO Max Ton/ftL & S

L 32.87" (835mm)

S 16.34" (415mm)

53090 30 $857 $510

RAIL CLAMP

END VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEW

END VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEW

Die, Rail, Holder and Rail Clamps

28Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

QUICK CHANGE 1V DIESD

IES

1.181[ 30 ]

R .059[ R 1.5 ]

.236[ 6 ]

.551[ 14 ]

( 2 )

1.181[ 30 ]

R .059[ R 1.5 ]

.551[ 14 ]

.315[ 8 ]

( 2 )

.551[ 14 ]

R .078[ R 2 ]

1.181[ 30 ]

.394[ 10 ]

( 2 )

.551[ 14 ]

.669[ 17 ]

[ R 2.5 ] R .098

.472[ 12 ]

1.181[ 30 ]

( 2 )

3.288[ 83.5 ]

( 2 )

.551[ 14 ]

R .059[ R 1.5 ]

.236[ 6 ]

42120, 42100880 900

.669[ 17 ]

R .098[ R 2.5 ]

.472[ 12 ]

3.288[ 83.5 ]

( 2 )

.551[ 14 ]

42103900

.551[ 14 ]

R .059[ R 1.5 ]

( 2 )

.315[ 8 ]

3.288[ 83.5 ]

42121, 42101880 900

3.288[ 83.5 ]

( 2 )

R .098[ R 2.5 ]

.669[ 17 ]

.551[ 14 ]

.472[ 12 ]

42104880

3.288[ 83.5 ]

R .078[ R 2 ]

.551[ 14 ]

.394[ 10 ]

( 2 )

42122, 42102880 900

42110 4211242111 42114

3.288[ 83.5 ]

.709[ 18 ]

R .098[ R 2.5 ]

( 2 )

.551[ 14 ]

.551[ 14 ]

42105880


(LT, ST & XT)

V1INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42100 90˚ 30 / 100 .236 6.0]

42120 88˚ 30 / 100 .236 [6.0]

42101 90˚ 30 / 100 .315 [8.0]

42121 88˚ 30 / 100 .315 [8.0]

42102 90˚ 30 / 100 .394 [10.0]

42122 88˚ 30 / 100 .394 [10.0]

42103 90˚ 30 / 100 .472 [12.0]

42104 88˚ 30 / 100 .474 [12.0]

42105 88˚ 30 / 100 .551 [14.0]

Note: Quick Change 1V Dies require die holder #43030 or #43530. V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 1V dies provides HRC-70.

88º & 90º

LOW PROFILE 88º & 90º

CAT. NO A ANGLE MAX. TONFT / METER

V1INCHES [mm]

S 16.34”

(415mm)

X 32.87”

(835mm).

42110 90˚ 30 / 100 .236 [6.0]

Call for priceand lead time.

42111 90˚ 30 / 100 .315 [8.0]

42112 90˚ 30 / 100 .394 [10.0]

42114 88˚ 30 / 100 .472 [12.0]

Note: Low Profile Quick Change 1V Dies require die holder #43030 or 43530. Nitrex standard on all 1V dies provides HRC-70.

29

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

42200

3.288[ 83.5 ]

.551[ 14 ]

.630[ 16 ]

R .118[ R 3 ]

(2)

.236[ 6 ]

3.288[ 83.5 ]

.551[ 14 ]

.748[ 19 ]

R .118[ R 3 ]

(2)

.315[ 8 ]

42201

.394[ 10 ]

.551[ 14 ]

3.288[ 83.5 ]

42202

.945[ 24 ]

R .118[ R 3 ]

(2)

42203

3.288[ 83.5 ]

.551[ 14 ]

1.102[ 28 ]

R .197 [ R 5 ]

(2)

.472[ 12 ]

3.288[ 83.5 ]

.551[ 14 ]

1.260[ 32 ]

R .197[ R 5 ]

(2)

.551[ 14 ]

42204 42205

3.288[ 83.5 ]

R .197[ R 5 ]

(2)

1.417[ 36 ]

.551[ 14 ]

.630[ 16 ]

42200

42203

42201

42204

42202

42205


(LT, ST & XT)

V1INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT32.87"

(835mm)

42200 30˚ 22 / 76 .236 [6.0]

42201 30˚ 27 / 90 .315 [8.0]

42202 30˚ 30 / 100 .394 [10.0]

42203 30˚ 30 / 100 .472 [12.0]

42204 30˚ 30 / 100 .551 [14.0]

42205 30˚ 30 / 100 .630 [16.0]

Note: V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 1V dies provides HRC-70.


30º ACUTE ANGLE

DIE

S

30Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

QUICK CHANGE 1V DIESD

IES

3.288[ 83.5 ]

R .016

.551[ 14 ]

.118[ 3 ]

[ R 4 ]

44200

3.288[ 83.5 ]

R .059

.551[ 14 ]

.236[ 6 ]

[ R 1.5 ]

44201

3.288[ 83.5 ]

R .098

.669[ 17 ]

.394[ 10 ]

[ R 2.5 ]

.551[ 14 ]

44202

3.288[ 83.5 ]

R .118

.748[ 19 ]

.472[ 12 ]

[ R 3 ]

.551[ 14 ]

44203

3.288[ 83.5 ]

R .138

.945[ 24 ]

.630[ 16 ]

[ R 3.5 ]

.551[ 14 ]

44204

[ 28 ]

[ R 4 ]

1.102

R .157

.787[ 20 ]

.551[ 14 ]

[ 83.5 ]3.288

44205

[ 32 ]

[ R 4.5 ]

1.260

R .177

.866[ 22 ]

.551[ 14 ]

[ 83.5 ]3.288

44206

[ 36 ]

[ R 5.5 ]

1.417

R .216

.984[ 25�]

.551[ 14 ]

[ 83.5 ]3.288

44207

44200

44204 44206

4420244201

44205 44207

44203


(LT, ST & XT)

V1INCHES [mm]

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT32.87"

(835mm)

44200 75° 30 / 100 .118 [3.0]

44201 75° 30 / 100 .236 [6.0]

44202 75° 30 / 100 .394 [10.0]

44203 75° 30 / 100 .472 [12.0]

44204 75° 30 / 100 .630 [16.0]

44205 75° 30 / 100 787 [20.0]

44206 75° 30 / 100 .866 [22.0]

44207 75° 30 / 100 .984 [25.0]

Note: V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 1V dies provides HRC-70.

75º

31

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1V DIE HOLDER & WEDGE BLOCK

2.362 [ 60 ]

.866 [ 22 ]

.555 [ 14.1 ]

1.181 [ 30 ]

1.102 [ 28 ]

1.181[ 30 ]

.555[ 14.1 ]

.866[ 22 ]

2.362[ 60 ]

1.102[ 28 ]

SIDE VIEW

TOP VIEW

1.181[ 30 ]

.555[ 14.1 ]

.866[ 22 ]

2.362[ 60 ]

1.102[ 28 ]

SIDE VIEW

TOP VIEWCAT. NO PRICE

43559

CAT. NO LT 32.87" (835mm)

ST 16.34" (415mm)

43030 $627

CAT. NO LT 32.87" (835mm)

ST 16.34" (415mm)

43530 $418

Note: Available with die tang. Contact application sales desk for pricing and lead times.

Two Piece Design(No Set Screw for Mounting)

One Piece Design(With Set Screw for Mounting)

Note: Available with die tang. Contact application sales desk for pricing and lead times.

1.181[ 30 ]

.555[ 14.1 ]

.866[ 22 ]

2.362[ 60 ]

1.102[ 28 ]

SIDE VIEW

TOP VIEW

TOP VIEW

SIDE VIEW

WEDGE BLOCK

QUICK CHANGE DIE HOLDER

HO

LDE

R &

WE

DG

E B

LOC

K

32Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1V DIES

Note: Acute-Angle Large 1V Dies may require die holder #43040. Check height against machine stroke prior to ordering.

V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.

Nitrex standard on all large 1V dies provides HRC-70.

1.260[ 32 ]

R .196[ R 5 ]

2.362[ 60 ]

2.362[ 60 ]

( 2 )

2.362[ 60 ]

1.575[ 40 ]

R .196[ R 5 ]

3.150[ 80 ]

3.150[ 80 ]

( 2 )

R .236[ R 6 ]

1.969[ 50 ]

2.362[ 60 ]

3.740[ 95 ]

3.740[ 95 ]

( 2 )

42302

42304

42303

2.362[ 60 ]

R .118[ R 3 ]

2.362[ 60 ]

( 2 )

.709[ 18 ]

2.362[ 60 ]

.984[ 25 ]

2.559[ 65 ]

R .157[ R 4 ]

(2)

42300 42301

30° 30°

45°

45°

45°


(LT & ST)

V1INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

42300 30° 24 / 80 .709 [18.0]

42301 30° 18 / 60 .984 [25.0]

42302 45˚ 12 / 40 1.260 [32.0]

42303 45˚ 21 / 70 1.575 [40.0]

42304 45˚ 21 / 70 1.969 [50.0]

30º & 45º ACUTE ANGLE LARGE

DIE

S

33

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1V DIES

85º LARGE

2.362[ 60 ]

1.260[ 32 ]

2.362[ 60 ]

R .157[ R 4 ]

( 2 )

2.362[ 60 ]

1.575[ 40 ]

2.362[ 60 ]

R .157[ R 4 ]( 2 )

2.362[ 60 ]

1.968[ 50 ]

R .157[ R 4 ]

2.362[ 60 ]

( 2 )

3.150[ 80 ]

2.362[ 60 ]

2.953[ 75 ]

R .196[ R 5 ]

2.480[ 63 ]

( 2 )

42400

42402

42401

42403

Note: Large 1V Dies may require die holder #43040. Check height against machine stroke prior to ordering. V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all large 1V dies provides HRC-70.

CAT. NO A ANGLE

MAX. TONFT / METER

(LT & ST)

V1 INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

42400 85˚ 30 / 100 1.260 [32.0]

42401 85˚ 30 / 100 1.575 [40.0]

42402 85˚ 30 / 100 1.968 [50.0]

42403 85˚ 30 / 100 2.480 [63.0]

85°

85°

85°

85°

DIE

S

34Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

1V DIESD

IES

3.740[ 95 ]

2.362[ 60 ]

3.150[ 80 ]

3.740[ 95 ]

R .236[ R 6 ]

( 2 )

R .275[ R 7 ]

4.331[ 110 ]

2.362[ 60 ]

4.724[ 120 ]

3.937[ 100 ]

( 2 )

42404

42405

Note: Large 1V Dies may require die holder #43040. Check height against machine stroke prior to ordering. V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.

CAT. NO A ANGLE VINCHES [mm]

MAX. TONFT / METER

(LT & ST)

LT 32.87"

(835mm)

ST16.34"

(415mm)

42404 85° 3.150 [80] 30 / 100

42405 85° 3.937 [100] 30 / 100

85°

85°

85º LARGE

35

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

Note: Large 1V Dies may require die holder #43040. Check height against machine stroke prior to ordering.

Please check width of lower beam of press brake prior to ordering die #42406.

V-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.

1.969[ 50 ]

2.362[ 60 ]

6.063[ 154 ]

3.543[ 90 ]

4.921[ 125 ]

[ 123 ] 4.843

R .354[ R 9 ]( 2 )

†

CAT. NO L 32.87" (835mm)

S 16.34" (415mm)

43040


(LT & ST)

V1INCHES [mm]

ST16.34"

(415mm)

42406 80° 30 / 100 4.921 [125]

1V DIES

1.969[50]

1.378[35]

2.362[60]

2.362[60]

.630[16]

.867[22]

Note: Exacta 4 Way Die is hardened, but does not have Nitrex surface enhancement.

CAT. NO V OPENING ANGLEMAX. TON

FT / METER

32.87" L[835MM]

32.87" X[835MM]

42340

V1 .630" [16] 88

30/100V2 1.378" [35] 85

V3 .867" [22] 88

V4 1.969" [50] 85

DIE

S80°

80º

EXACTA 4 WAY DIE

DIE HOLDER LARGE

36Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

RAIL STYLE OFFSET TOOLSO

FFS

ET

TOO

LS

Note: *Dimensions are for shut height. †Offset height may vary as much as +- .020" (0.5mm) after bending. All angles will be obtuse. Special offset sizes are available at additional cost. Nitrex (HRC-70) standard on all dies. Quick change offset tools are available at additional cost.

Part No. 43104

.375[ 9.52 ]

3.524[ 89.51 ]

†

*

3.569[ 90.65 ]

.312[ 7.9 ]

Part No. 43103

*

3.480[ 88.39 ]

.438[ 11.1 ]

Part No. 43105

†

*

3.701[ 94 ]

.125[ 3.18 ]

PART NO.43100

†


EXTRA PARTS

5.118[ 130 ]

3.657[ 92.88 ]

.188[ 4.8 ]

PART NO. 43101

†

*

.250[ 6.4 ]

3.612[ 91.76 ]

PART NO. 43102

†

*

3.436[ 87.27 ]

.500[ 12.7 ]

Part No. 43106

*

43100 4310343101

43104

43102

43105 43106

CAT. NOMAX. TONFT / METER

(LT, ST & XT)

MAX.MATERIAL

OFFSET DIM. INCHES [mm] EFFECTIVE V

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

43100 30 / 100 18 GA. CRS .125 [3.18] .177"

43101 30 / 100 18 GA. CRS .188 [4.8] .266"

43102 30 / 100 18 GA. CRS .250 [6.4] .354"

43103 30 / 100 18 GA. CRS .312 [7.9] .441"

43104 30 / 100 16 GA. CRS .375 [9.52] .530"

43105 30 / 100 16 GA. CRS .438 [11.1] .619"

43106 30 / 100 16 GA. CRS .500 [12.7] .707"

†

†

*

37

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

3.780[ 96 ]

2.362[ 60 ]

4.110[ 104.4 ]

3.110[ 79 ]

2.362[ 60 ]

.394[ 10 ]

R .039[ R 1 ]

.236[ 6 ]

.472[ 12 ]

R .039[ R 1 ]

2.362[ 60 ]

R .039[R 1]( 2 ) ( 2 )

( 2 )

1.969[ 50 ]

.593[ 15.05 ]

1.969[ 50.0 ]

.570[ 14.5 ]

Nitrex standard on all dies provides HRC-70.

Note: Designed to run with standard 2V Quick Change die system.

Custom heights available for stage bending. Contact application sales desk for pricing and lead times.

Nitrex standard on all Quick Change dies provides HRC-70.

Nitrex standard on all dies provides HRC-70.


(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

42312 30 / 100


(LT & ST)

V1INCHES [mm]

V2INCHES [mm]

V3INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

42310 30 / 100 .236 [6.0] .394 [10.0] .472 [12.0]


(LT & ST)

L32.87"

(835mm)

S16.34"

(415mm)

42311 30 / 100

FLATTENING DIESD

IES

RAIL STYLE QUICK CHANGE

3V

THRUST ABSORBING FLATTENING DIE

38Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

FLATTENING PUNCHESP

UN

CH

ES

.906[ 23 ]

"H"

1.575[ 40 ]

WT-41523

1.101[ 27.97 ]

"H"

.551[ 14 ]

1.181[ 30 ] .472

[ 12 ]

WT-41630

1.101[ 27.97 ]

41523 41630

CAT. NOH

HEIGHTINCHES [mm]

MAX. TONFT / METER

(LT & ST)

LT 32.87"

(835mm)

ST16.34"

(415mm)

41523 2.559 [65.0] 30 / 100

41630 3.307 [84.0] 30 / 100

39

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

.236[ 6 ]

.039[ 1 ]

.630[ 16 ]

.551[ 14 ]

.906[ 23 ]

Part No.43522

.315[ 8 ]

.630[ 16 ]

.551[ 14 ]

.906[ 23 ]

.039[ 1 ]

.394[ 10 ]

.630[ 16 ]

.866[ 22 ] 1.220

[ 31 ]

.039[ 1 ]

1.181[ 30 ]

.394[ 10 ]

1.720[ 43.7 ]

.118[ 3 ]

Note: Nitrex (HRC-70) standard on all dies.

H

2.362

[ 60 ]

43522

43524

43523

43528

CAT. NOV1

INCHES [mm]

HHEIGHTINCHES

[mm]

MAX. TONFT / METER

(LT & ST)

MAX MATERIAL

LT32.87"

(835mm)

ST16.34"

(415mm)

42601 .236 [6.0] 4.587 [116.5] 20 / 67 20 GA. CRS

42602 .315 [8.0] 4.587 [116.5] 20 / 67 16 GA. CRS

42603 .394 [10.0] 4.902 [124.5] 20 / 67 14 GA. CRS

42608 .394 [10.0] 5.402 [137.2] 20 / 67 14 GA. CRS


(LT & ST)

MAX MATERIAL

V1 INCHES [mm]

LT 32.87"

(835mm)

ST16.34"

(415mm)

43522 20 / 67 20 GA. CRS .236 [6.0]

43523 20 / 67 16 GA. CRS .315 [6.0]

43524 20 / 67 14 GA. CRS .394 [10.0]

43528 25 / 83 14 GA. CRS .394 [10.0]

TWO STAGE HEMMING DIED

IES

REPLACEMENT V-BLOCKS FOR WILSON HEMMING DIES

40Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

TWO STAGE HEMMING PUNCH & DIEH

EM

MIN

G P

UN

CH

& D

IE

.394[ 10 ]

4.094[ 104 ]

30˚

4.331[ 110 ]

2.362[ 60 ]

R.039[ 1 ]

Two Stage Hemming Punch & Die Assembled

41909

Note: 16 ga. maximum material.Nitrex (HRC-70) standard on all dies.


(LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41909 30 / 100

43595 30 / 100 N/A

.394[ 10 ]

4.094[ 104 ]

30˚

4.331[ 110 ]

2.362[ 60 ]

R.039[ 1 ]

43595

41

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

5.118[ 130 ]

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

5.118[ 130 ]

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

1.969[ 50 ]

5.906[ 150 ]

Part No. 43001

4.724[ 120 ]

.787[ 20 ]

1.969[ 50 ]

5.906[ 150 ]

Part No. 43001

4.724[ 120 ]

.787[ 20 ]

The clamp plate included with this punch holder will accomodate a punch with or without a safety groove.


CAT. NO FT / TON PRICE

43000 30 / 100


43001 30 / 100

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

PUNCH HOLDERS

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

HO

LDE

RS

Z1 NARROW

Z2 NARROW

42Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

PUNCH HOLDERH

OLD

ER

S

9.842[ 250 ]

.787[ 20 ]

8.662[ 220 ]

Part No. 43002

Note: Punch holder #43002 is designed for Z2 style upper beams, but may be modified for a Z1 center by using Kit #980079.

43002 Z2 Punch Holder 980079 Z1 Conversion Kit

CAT. NO MAX. TONFT/METER LENGTH PRICE

43002 15 / 50 5.906 [150mm]

980079 Z1 Conversion Kit 5.906 [150mm]

Z2 STYLE DEEP

43

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

5.118[ 130 ]

3.937[ 100 ]

5.906[ 150 ]

Part No. 43003

.276[ 7 ]

EXISTING CLAMP PLATEPart #43531CLAMP PLATE

SPECIAL BOLT

Part No. 42720

EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)

EXISTING SPRINGSPRING

CLAMP FRONT (CW)

CLAMP REAR (CCW)

SPECIAL LOCKING CAP

Part No. 42710

EXISTING SPRING

EXISTING CLAMP PLATE

EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)

SPRING

Part #43519CLAMP PLATE

WITH SAFETY TONGUE

SPECIAL LOCKING CAP

SPECIAL BOLT

CLAMP FRONT (CW)

CLAMP REAR (CCW)

5.118[ 130 ]

3.937[ 100 ]

5.906[ 150 ]

Part No. 43003

.276[ 7 ]

Part No. 42710 shown Part No. 42720 shown

42710, 43531 42720, 43519



43003 30 / 100

CAT. NO DESCRIPTION PRICE

42710 Flat Clamp Kit

43531 Flat Clamp Plate

PUNCH HOLDER

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

HO

LDE

RS

STACKING

DUAL CLAMPING KITS

CAT. NO DESCRIPTION PRICE

42720 Safety Clamp Kit

43519 Safety Clamp Plate

44Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

EUROPEAN PUNCH ADAPTERS

5.906[ 150 ]

2.638[ 67 ]

1.575[ 40 ]

Part No. 43004


EXTRA PARTS

5.118[ 130 ]

5.906[ 150 ]

2.638[ 67 ]

1.575[ 40 ]

Part No. 43004


EXTRA PARTS

5.118[ 130 ]

For Conventional Press Brakes without punch holder height adjustment.

American to European Punch AdaptorsTonnage = 30/ft.

08.05000.2

06263.2

08.05000.2

06263.2

CAT. NO DESCRIPTION MAX TON/FT= L & S L 36" S 18"

43590European to American

Die Holder40

1.536[ 39 ]

2.362[ 60 ]

*Note: Please verify press brake tongue slot width when ordering.

CAT. NO DESCRIPTION MAX TON/FT= L & S L 36" S 18"

43006American to European

Die Holder40

PU

NC

H A

DA

PTE

RS

CAT. NO DESCRIPTION MAX TON/FT= 5.906”[150mm]

43004 American to European Punch Adapter

30

AMERICAN TO EUROPEAN DIE

EUROPEAN TO AMERICAN DIE

45

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

3.583

[ 60 ]

[ 91 ]

2.362

[ 100 ]3.937

1.969[ 50 ]

1.969[ 50 ]

5.906[ 150 ]

2.362[ 60 ]

4.252[ 108 ]

1.772[ 45 ]

4.331[ 110 ]

URETHANE HOLDERS & PADS

CAT. NO DESCRIPTION SHORE HARDNESS

LT 32.87"

(835mm)

S16.34"

(415mm)

42501 Holder N/A

42511 Pad 80A/Red

42521 Pad 90A/Blue


LT 32.87"

(835mm)

S16.34"

(415mm)

42503 Holder N/A

42513 Pad 80A/Red

42523 Pad 90A/Blue


LT 32.87"

(835mm)

S16.34"

(415mm)

42502 Holder N/A

42512 Pad 80A/Red

42522 Pad 90A/Blue


LT 32.87"

(835mm)

S16.34"

(415mm)

42504 Holder N/A

42514 Pad 80A/Red

42524 Pad 90A/Blue

1.693[ 43 ]

2.362[ 60 ]

.984[ 25 ]

1.181[ 30 ]

3.268[ 83 ]

2.362[ 60 ]

4.724[ 120 ]

1.181[ 30 ]

3.150[ 80 ]

NOTE:All urethane die holders are machined from 6061-T6 aluminum.Urethane holders may require die holder #43040Check height against machine stroke prior to ordering.

46Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

NOTES

47

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905.840.1032Fax: 001.800.544.2096

Tel: 800.445.4518Tel: 800.268.4180Tel: 001.800.741.2510


U.S.A.CanadaMexico

Fax: 800.539.4590Fax: 905-840-1032Fax: 001.800.544.2096

wilsontool.com is your online source for the latest news and information from Wilson Tool. Available in seven languages, wilsontool.com is a great resource for all of our customers around the globe.

Our e-newsletters not only keep you up to date on the latest product and company news along with workshop and class information, but each month we provide a solutions-based article to improve performance and productivity in your shop.Register at wilsontool.com

e-Business CenterRequest a quote. Place an order. Review your account history. Track a shipment. Even download special tool drawings to easily program your machines. 24 hours a day, 7 days a week.Log-on or register your account at wilsontool.com/ebiz.

YouTubeWilson Tool’s YouTube channel contains many videos featuring product demonstrations showing our tooling in action. Visit us at http://www.youtube.com/user/wilsontooltube

WILSON TOOL INTERNATIONAL

B300C 2015

© 2015 Wilson Tool International

WORLD HEADQUARTERS

Wilson Tool International - United StatesTel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]

NORTH AMERICA

Wilson Tool - CanadaPunching and Stamping Division Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]

Wilson Tool - CanadaPress Brake Division Tel: 800-268-4180 | Fax: 905-840-1032 Email: [email protected]

Wilson Tool - MexicoTel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]

SOUTH AMERICA

Wilson Tool - ArgentinaTel: +5411 4799 6519 Email: [email protected]

Milling Puncionadeiras - BrazilTel/Fax: 55 11 5621-2100 Email: [email protected]

CHINA / PACIFIC RIM

Wilson Tool - ChinaTel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]

EUROPE / MIDEAST / AFRICA

Wilson Tool - United KingdomTel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]

Wilson Tool - GermanyTel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]

Wilson Tool - DenmarkTel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]

Wilson Tool - FranceTel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]

Wilson Tool - South Africa Tel: +27 11 849 1955 | Fax: 086 657 8629 Email: [email protected]

Toolspress - ItalyTel: +39 0521 850510 / 850677 Fax: +39 0521 850796 Email: [email protected]

TERMS AND CONDITIONS - Wilson Toolglobal.wilsontool.com/Mandarin/Resources/images/488.pdf · quick...

Documents

Transcript of TERMS AND CONDITIONS - Wilson Toolglobal.wilsontool.com/Mandarin/Resources/images/488.pdf · quick...