Orientation of craniofacial planes to gravity horizontal plane
Term 1 Lesson 7: Cutting tools...Cutting tools: Planes 1. Name these 3 planes: (3) 1.2. _____ 1.3....
Transcript of Term 1 Lesson 7: Cutting tools...Cutting tools: Planes 1. Name these 3 planes: (3) 1.2. _____ 1.3....
Term 1
Lesson 7: Cutting tools
KWAGGASRANDSKOOL / SCHOOL
WOODWORK
YEAR 2
LEARNER WORK DURING LOCKDOWN
TEACHER : MR J. J VAN RENSBURG
STUDY NOTES:
Activity:
Cutting tools:
Planes
1. Name these 3 planes: (3)
1.2. _________________________
1.3. _________________________
1.4. _________________________
2. Which plane will you use to plane long rough edges and surfaces? (1)
2.1. ____________________________
3. What is a flat face spokeshave used for? (1)
3.1. ____________________________
4. Why is correct feet placement when working important? (2)
4.1. _____________________________________________________
5. Why should you not use a smoothing plane to level a big surface (like a
table top)? (1)
5.1. ______________________________________________________
_______________________________________________________
6. What could be the cause of a rough surface after you have planed the
wood? (1)
6.1. ____________________________________________________
Total: 9
Chisels
1. Name these 5 types of chisels, and give one use for each: (10)
1. Name: ________________________
Use: _________________________________________________
___________________________________________________
2. Name: ________________________
Use: _________________________________________________
___________________________________________________
3. Name: ________________________
Use: _________________________________________________
___________________________________________________
4. Name: ________________________
Use: _________________________________________________
___________________________________________________
5. Name: ________________________
Use: _________________________________________________
___________________________________________________
6. It is better to place your wood on a flat surface when doing vertical
chiseling. Why? (1)
6.1. __________________________________________________
7. Which is safer - a very sharp chisel, or one that is not very sharp?
(1)
7.1. ____________________________
8. Choose the correct answer: (4)
Total: 17
True False
8.1 “Make a number of thin cuts instead of one
thick cut. It takes less time and requires less
power”.
8.2 “You do not need to use a bench vise or
clamps when doing chisel work.”
8.3 “Use a ball peen hammer to hit on the back
of a mortise chisel”
8.4 “Chisel in the direction of the grain of the
wood”
Miscellaneous
1. Which one of these hammers is the Carpenter’s Mallet? Circle the correct hammer in the picture: (1)
2. What is a nail punch? (1)
2.1. ________________________________________________________
3. What are oilstones? (1)
3.1. _______________________________________________________
4. Name 5 important things to remember when using oilstones . (5)
4.1. ________________________________________________________
4.2. ________________________________________________________
4.3. ________________________________________________________
4.4. ________________________________________________________
4.5. ________________________________________________________
5. Why do we use oil on oilstones? (3)
5.1. __________________________________________
5.2. __________________________________________
5.3. ________________________________________________________
6. Underline the correct answer: (1)
“You need to shape a big square piece of rough wood, into a round shape.
Which tool do you need for the job?”
6.1. Rasp or a File?
7. Use the help block to complete the sentence: (4)
7.1. In woodwork, files are used to 7.1.1__________________ tools and to
7.1.2________________ off 7.1.3_________________ such as
7.1.4_________________ etc.
(it is in your notes – Read!):
Total: 16
Screws Hamburger Metal Sharpen
Finish Wood Eat Welding