Templates. The Problem Supplier X A range on the data sheet.
-
Upload
rolf-shields -
Category
Documents
-
view
219 -
download
0
Transcript of Templates. The Problem Supplier X A range on the data sheet.
Templates
The Problem
Supplier
X
DatasheetTransmitter, Pressure, Electric
Document Number : 28-1A-KOG-I54-27500-0012 Revision : 1Plant/Platform : Test Installation 2 Process Datash. No. : N/ATag number : PT -42-0304 System : N/ASerialNo : N/A Range From : 0SetPoint Low : 10 barG Range To : 110SetPoint Hight : 71 barG Range Unit : barGP & ID : 28-1A-KOG-C78-00275-0002 Area : N/ALine/Equipment no. : XX-42-0002 PO: : TI2-M022-ME-01Service description : SCALE INHIBITOR. PUMP OUTLET
Unique no. TEK-00018117Manufacturer EMERSON PROCESS MANAGEMENTType 3051CGManuf. Partno. 3051CG-5-A-2-2-A-1-K-B4-I1-L4-M6-Q4Class Transmitter, Pressure, Electric
Area General
Explosion protection : EEx ia Description : GaugeGas-group : IIC Description : Smart, hart protocol
Temperature class : T5 Supply : 10.5 - 55 V DC
Approval authority : BASEEFA Mounting : Coplanar flange bracket for
Certificate : BAS 97ATEX1089X pipe or panel
IP-Class : IP66
ATEX group : II Material
ATEX category : 1 Body material : Stainless steel
ATEX explosive atmosphere : G Filling fluid : Silicone oil
Ambient temperature : -40 - 85 °C Seal material : Glass filled TFE
Process connection material : Stainless steel
Dimensions and Weight Non process cover material : 316
Weight : 4.7 kg Flange bolt material : 316 AUSTENITIC
Drain/vent material : Stainless steel
Function Diaphragm material low pressure : 316L
Range : 0 - 13800 kPa connection
Span limit minimum, Pressure : 138 kPa Diaphragm material high pressure: 316L
Span limit maximum, Pressure : 13800 kPa connection
Alternative Range : 0 - 138 bar Bracket material : Stainless steel
Alternative span limit minimum, : 1.38 bar Bracket bolt material : Stainless steel
Pressure Adapter bolt material : 316 AUSTENITIC
Alternative span limit maximum, : 138 bar
Pressure Process Connection
Output signal : 4 - 20 mA Connection design : NPT
Accuracy : +/- 0.075 % Size : 1/4"
Display type : LCD Thread pitch : 18 thr/in
Static working pressure : 3626 psi
Supply Connection
Supply connection design : Metric threaded
Supply connection size : 20 mm
Thread pitch supply : 1.5 mm/thr
Comment
Accuracy for span greater than 10:1 of URL. Power consumption 18-36
mW. Load limitation: 587 Ohm. Static pressure value valid within transmitter temperature
spec. Output: Digital signal based on hart protocol. Coplanar flange Intrinsic Safety and
Dust approval. Calibration data sheet (5 points calibration at 0%, 25%, 50%, 75%, and 100%
of range)
1 09.11.2006 14:44 Generated by P.M.
Rev. Date Issue/description Prepared Cheked Disc. Appr. Client. Appr. Page 1 of 1
A range on the data sheetDatasheet
Transmitter, Pressure, Electric
Document Number : 28-1A-KOG-I54-27500-0012 Revision : 1Plant/Platform : Test Installation 2 Process Datash. No. : N/ATag number : PT -42-0304 System : N/ASerialNo : N/A Range From : 0SetPoint Low : 10 barG Range To : 110SetPoint Hight : 71 barG Range Unit : barGP & ID : 28-1A-KOG-C78-00275-0002 Area : N/ALine/Equipment no. : XX-42-0002 PO: : TI2-M022-ME-01Service description : SCALE INHIBITOR. PUMP OUTLET
Unique no. TEK-00018117Manufacturer EMERSON PROCESS MANAGEMENTType 3051CGManuf. Partno. 3051CG-5-A-2-2-A-1-K-B4-I1-L4-M6-Q4Class Transmitter, Pressure, Electric
Area General
Explosion protection : EEx ia Description : GaugeGas-group : IIC Description : Smart, hart protocol
Temperature class : T5 Supply : 10.5 - 55 V DC
Approval authority : BASEEFA Mounting : Coplanar flange bracket for
Certificate : BAS 97ATEX1089X pipe or panel
IP-Class : IP66
ATEX group : II Material
ATEX category : 1 Body material : Stainless steel
ATEX explosive atmosphere : G Filling fluid : Silicone oil
Ambient temperature : -40 - 85 °C Seal material : Glass filled TFE
Process connection material : Stainless steel
Dimensions and Weight Non process cover material : 316
Weight : 4.7 kg Flange bolt material : 316 AUSTENITIC
Drain/vent material : Stainless steel
Function Diaphragm material low pressure : 316L
Property with Scale and Quantification
• We wish to interpret the statement“The ambient temperature during operation of a 3051CG pressure transmitter should be within -40 and 85 degrees Celsius.”
• The statement instantiates this template (6 roles):Any P of a C has a property of type Q, limited to the range i – j on scale S
• We now illustrate how the template-conformant statement is broken down into parts, building a semantic model in the process
• This process corresponds directly to the execution of template rules
Property with Scale and Quantification
3051CG
CO Individual
Ambient Temperature
CO CO Relationship
Temperature
Single Property Dimension
Celsius
Scale
”85"
ExpressReal
”-40"
ExpressReal
85
Arithmetic Number
Represented
Pattern ”85"
ExpressReal
85
Arithmetic Number
Temperature 85°C
PropertyInput Result
Classified
Classifier
Classified
Classifier
“Ambient temperature during operation of a 3051CG pressuretransmitter should be within -40 and 85 degrees Celsius.”
Classifier
Upper Bound Of Property Range
Classified
Temperature 20°C
PropertyInput Result
Temperature 85°C
Property
Property Range
3051CG
CO Individual
Ambient Temperature
CO CO Relationship
Temperature
Single Property Dimension
Celsius
Scale
85
Arithmetic Number
Represented
Pattern ”85"
ExpressReal
85
Arithmetic Number
Classified
Classifier
Classified
Classifier
”-40"
ExpressReal
Temperature -40°C
Property
Temperature Range-40°C – 85°C
Property Range
Classifier
Lower Bound Of Property RangeClassified
Classified
Classifier
3051CG
CO Individual
Ambient Temperature
CO CO Relationship
Temperature Range-40°C – 85°C
Property Range
Property Range Restriction
CO Possessor Property Space
CO Indirect Property
Ambient Temperature
CO CO Relationship
3051CG
CO Individual
Temperature Range-40°C – 85°C
Property Range
Model: Ambient Temperature Range
3051CG ambient temperature: -40°C – 85°C3051CG ambient temperature: -40°C – 85°C
3051CGCO Individual
COPossessor
Temperature Range-40°C – 85°C
Property Range
PropertySpace
CO Indirect Property
Classifier
Temperature 85°C
Property
TemperatureSingle Property Dimension
CelsiusScale
Classified
Classifier
85
Arithmetic NumberInput Result
Property Quantification
Upper Bound Of Property Range
Ambient TemperatureCO CO Relationship
Classified
Classifier
Classifier
Represented
Pattern ”85"ExpressReal
CO Identification
Classified
Classified
Classifier
Temperature -40°C
Property
Classified
Classifier
-40
Arithmetic NumberInput Result
Lower Bound Of Property Range
Classifier
Represented
Pattern ”-40"ExpressReal
Classified
Classified
Property Quantification
Templates• A 15926 template is
– an n-place predicate with– a definition in terms of simpler predicates
• The shorthand template is comparable to a (database/.XLS) table.
Lower LimitScaleProperty TypePropertyModel
• The longhand template provides interpretation – What is the statement made by an instance of the predicate– Break down complex statements into simpler statements– Ultimately, we end up with atomic 15926 statements
Upper Limit
IDS converter
Mapping into template statements
Data inData inTemplateTemplateFormatFormat
Data inData inTemplateTemplateFormatFormat
Mapping intotarget format
IDS converter
lifting lowering
DB
Project
DB(OWL)
DB
SWRL SPARQL
OWL DLreasoner:• consistency• type inference
XQuery XQuery
In XML format
In XML format
Main Section of a Gellish Table
-1 Version: 21-okt-03 Lubricating oil system - Knowledge model0 54 16 2 101 1 60 3 15 201 65 4 66 7
1Languag
eDiscipline
Left hand object id
Left hand object name Fact idRelation type
idRelation type name
Right hand object id
Right hand object name DefinitionFull
definitionUID of UoM UoM
16 English rotating equipment engineering130 206 pump 11 000 223 1 191 can be a part of a 130 600 pump system13 English heat transfer engineering100 081 heat exchanger 1 000 003 1 191 can be a part of a 100 379 cooling system19 English static equipment engineering10 132 strainer 11 000 013 1 191 can be a part of a 130 600 pump system25 English piping engineering 10 431 piping system 11 000 016 1 191 can be a part of a 100 086 heat transfer system20 English piping engineering 10 431 piping system 11 000 018 1 191 can be a part of a 130 600 pump system41 English piping engineering 10 671 change-over system 11 000 022 1 146 is a specialization of 10 431 piping system intended to switch between two or more alternative routes for a fluid through systems or pieces of equipment.44 English control engineering 71 305 flow control system 11 000 031 1 146 is a specialization of 70 760 control system45 English control engineering 71 306 level control system 11 000 033 1 146 is a specialization of 70 760 control system42 English control engineering 71 307 pressure control system 11 000 036 1 146 is a specialization of 70 760 control system46 English control engineering 71 308 speed control system 11 000 038 1 146 is a specialization of 70 760 control system43 English control engineering 71 309 temperature control system 11 000 040 1 146 is a specialization of 70 760 control system21 English control engineering 71 314 pump control system 11 000 044 1 191 can be a part of a 130 600 pump system17 English rotating equipment engineering130 102 driver 11 000 056 1 301 can be a role of a part of a 130 600 pump system18 English rotating equipment engineering340 026 coupling 11 000 065 1 191 can be a part of a 130 600 pump system34 English static equipment engineering521 016 collection vessel 11 000 068 1 146 is a specialization of 640 020 performer34 English static equipment engineering521 016 collection vessel 11 000 069 4 714 can be a role of a 520 243 vessel55 English static equipment engineering521 017 accumulator system 11 000 072 1 146 is a specialization of 370 534 storage system
Some Template SpecifiactionsSCT Mnemonic SCT Name Param 1 Param 2 Param 3
Thing class_of_identification class_of_information_representationIdentification <Obj1> is identified by <Identifier>
Thing class_of_identification class_of_information_representation class_of_class_of_identificationIdentification (with Context) <Obj1> is identified by <Identifier> classify relation by: <Obj2>
Thing class_of_identification EXPRESS_String class_of_class_of_identificationIdentification Text (with Context) <Obj1> is identified by <Identifier String> classify relation by: <Obj2>
Thing class_of_identification EXPRESS_Binary class_of_class_of_identificationIdentification Symbolt (with Context) <Obj1> is identified by <binary> classify relation by: <Obj2>
Thing class_of_identification EXPRESS_String class_of_class_of_identificationIdentification Text (with Context) <Obj1> is identified by <Identifier String> classify relation by: <Obj2>
Thing class_of_identification EXPRESS_String class_of_class_of_identificationIdentification Text <Obj1> is identified by <Identifier String>
Thing classification Class
Classification <Obj1> Instance is member of <Class ID>Possible individual classification Class_of_individual
Classification of individual <Class ID> is member of <Class ID>Class_of_individual classification Class_of_class
Classification of class of individual <Class ID> is member of <Class ID>class_of_class classification class
Classification of class of class <Class ID> is member of <Class ID>class specialisation class
Specialisation <Class ID> a subclass of <Class ID>Class_of_individual specialisation Class_of_individual
Specialisation of class of individual <Class ID> a subclass of <Class ID>class_of_class specialisation class_of_class
Specialisation of class of class <Class ID> a subclass of <Class ID>class specialisation class
Specialisation of class of class of class <Class ID> a subclass of <Class ID>possible_individual assembly_of_individual arranged_individual
Assembly of individual <Class ID> is part of <Class ID>
SPcc
SP
SPccc
ASi
ID
IDtC
IDt
IDsC
IDC
IDtC
Cli
CLc
CLcc
CL
SPi
Template Definitions
The IDS Converter
Schema
Source data XSLT
transformationsXML document
Template Definition Tool
Template Library
Target data XSLT
transformationsXML document
Longhand templates Rules (SWRL)
Inference & Consistency check
(OWL DL)
ISO 15926 Project DB
Template Definition Tool
Schema
Template Library
(1)
Standard Project IDS
(1)
(1): The same library, shown two places for convenience
DatasheetTransmitter, Pressure, Electric
Document Number : 28-1A-KOG-I54-27500-0012 Revision : 1Plant/Platform : Test Installation 2 Process Datash. No. : N/ATag number : PT -42-0304 System : N/ASerialNo : N/A Range From : 0SetPoint Low : 10 barG Range To : 110SetPoint Hight : 71 barG Range Unit : barGP & ID : 28-1A-KOG-C78-00275-0002 Area : N/ALine/Equipment no. : XX-42-0002 PO: : TI2-M022-ME-01Service description : SCALE INHIBITOR. PUMP OUTLET
Unique no. TEK-00018117Manufacturer EMERSON PROCESS MANAGEMENTType 3051CGManuf. Partno. 3051CG-5-A-2-2-A-1-K-B4-I1-L4-M6-Q4Class Transmitter, Pressure, Electric
Area General
Explosion protection : EEx ia Description : GaugeGas-group : IIC Description : Smart, hart protocol
Temperature class : T5 Supply : 10.5 - 55 V DC
Approval authority : BASEEFA Mounting : Coplanar flange bracket for
Certificate : BAS 97ATEX1089X pipe or panel
IP-Class : IP66
ATEX group : II Material
ATEX category : 1 Body material : Stainless steel
ATEX explosive atmosphere : G Filling fluid : Silicone oil
Ambient temperature : -40 - 85 °C Seal material : Glass filled TFE
Process connection material : Stainless steel
Dimensions and Weight Non process cover material : 316
Weight : 4.7 kg Flange bolt material : 316 AUSTENITIC
Drain/vent material : Stainless steel
Function Diaphragm material low pressure : 316L
Range : 0 - 13800 kPa connection
Span limit minimum, Pressure : 138 kPa Diaphragm material high pressure: 316L
Span limit maximum, Pressure : 13800 kPa connection
Alternative Range : 0 - 138 bar Bracket material : Stainless steel
Alternative span limit minimum, : 1.38 bar Bracket bolt material : Stainless steel
Pressure Adapter bolt material : 316 AUSTENITIC
Alternative span limit maximum, : 138 bar
Pressure Process Connection
Output signal : 4 - 20 mA Connection design : NPT
Accuracy : +/- 0.075 % Size : 1/4"
Display type : LCD Thread pitch : 18 thr/in
Static working pressure : 3626 psi
Supply Connection
Supply connection design : Metric threaded
Supply connection size : 20 mm
Thread pitch supply : 1.5 mm/thr
Comment
Accuracy for span greater than 10:1 of URL. Power consumption 18-36
mW. Load limitation: 587 Ohm. Static pressure value valid within transmitter temperature
spec. Output: Digital signal based on hart protocol. Coplanar flange Intrinsic Safety and
Dust approval. Calibration data sheet (5 points calibration at 0%, 25%, 50%, 75%, and 100%
of range)
1 09.11.2006 14:44 Generated by P.M.
Rev. Date Issue/description Prepared Cheked Disc. Appr. Client. Appr. Page 1 of 1
ISO 15926 DM
ISO 15926 + PCA RDL
Longhand templates Rules (SWRL)
Inference & Consistency check
(OWL DL)
The IDS Converter, Optional Use
Source data XSLT
transformationsXML document
Template Definition Tool
Schema
Template Library
Standard Project IDS
Longhand templates Rules (SWRL)
Inference & Consistency check
(OWL DL)Target data
XSLT transformations
XML document
Template Definition Tool
Schema
Template Library
Target System
ISO 15926 DM
ISO 15926 + PCA RDL
ISO 15926 Project DB
(1) (1)
(1): The same library, shown two places for convenience
DatasheetTransmitter, Pressure, Electric
Document Number : 28-1A-KOG-I54-27500-0012 Revision : 1Plant/Platform : Test Installation 2 Process Datash. No. : N/ATag number : PT -42-0304 System : N/ASerialNo : N/A Range From : 0SetPoint Low : 10 barG Range To : 110SetPoint Hight : 71 barG Range Unit : barGP & ID : 28-1A-KOG-C78-00275-0002 Area : N/ALine/Equipment no. : XX-42-0002 PO: : TI2-M022-ME-01Service description : SCALE INHIBITOR. PUMP OUTLET
Unique no. TEK-00018117Manufacturer EMERSON PROCESS MANAGEMENTType 3051CGManuf. Partno. 3051CG-5-A-2-2-A-1-K-B4-I1-L4-M6-Q4Class Transmitter, Pressure, Electric
Area General
Explosion protection : EEx ia Description : GaugeGas-group : IIC Description : Smart, hart protocol
Temperature class : T5 Supply : 10.5 - 55 V DC
Approval authority : BASEEFA Mounting : Coplanar flange bracket for
Certificate : BAS 97ATEX1089X pipe or panel
IP-Class : IP66
ATEX group : II Material
ATEX category : 1 Body material : Stainless steel
ATEX explosive atmosphere : G Filling fluid : Silicone oil
Ambient temperature : -40 - 85 °C Seal material : Glass filled TFE
Process connection material : Stainless steel
Dimensions and Weight Non process cover material : 316
Weight : 4.7 kg Flange bolt material : 316 AUSTENITIC
Drain/vent material : Stainless steel
Function Diaphragm material low pressure : 316L
Range : 0 - 13800 kPa connection
Span limit minimum, Pressure : 138 kPa Diaphragm material high pressure: 316L
Span limit maximum, Pressure : 13800 kPa connection
Alternative Range : 0 - 138 bar Bracket material : Stainless steel
Alternative span limit minimum, : 1.38 bar Bracket bolt material : Stainless steel
Pressure Adapter bolt material : 316 AUSTENITIC
Alternative span limit maximum, : 138 bar
Pressure Process Connection
Output signal : 4 - 20 mA Connection design : NPT
Accuracy : +/- 0.075 % Size : 1/4"
Display type : LCD Thread pitch : 18 thr/in
Static working pressure : 3626 psi
Supply Connection
Supply connection design : Metric threaded
Supply connection size : 20 mm
Thread pitch supply : 1.5 mm/thr
Comment
Accuracy for span greater than 10:1 of URL. Power consumption 18-36
mW. Load limitation: 587 Ohm. Static pressure value valid within transmitter temperature
spec. Output: Digital signal based on hart protocol. Coplanar flange Intrinsic Safety and
Dust approval. Calibration data sheet (5 points calibration at 0%, 25%, 50%, 75%, and 100%
of range)
1 09.11.2006 14:44 Generated by P.M.
Rev. Date Issue/description Prepared Cheked Disc. Appr. Client. Appr. Page 1 of 1
Source data XSLT
transformationsXML document
Schema
The IDS Converter, Optional Use
Source data XSLT
transformationsXML document
Template Definition Tool
Schema
Template Library
Standard Project IDS
Longhand templates Rules (SWRL)
Inference & Consistency check
(OWL DL)
XML document
Template Definition Tool
Schema
Template Library
ISO 15926 DM
ISO 15926 + PCA RDL
ISO 15926 Project DB
(1) (1)
(1): The same library, shown two places for convenience
Source System
DatasheetTransmitter, Pressure, Electric
Document Number : 28-1A-KOG-I54-27500-0012 Revision : 1Plant/Platform : Test Installation 2 Process Datash. No. : N/ATag number : PT -42-0304 System : N/ASerialNo : N/A Range From : 0SetPoint Low : 10 barG Range To : 110SetPoint Hight : 71 barG Range Unit : barGP & ID : 28-1A-KOG-C78-00275-0002 Area : N/ALine/Equipment no. : XX-42-0002 PO: : TI2-M022-ME-01Service description : SCALE INHIBITOR. PUMP OUTLET
Unique no. TEK-00018117Manufacturer EMERSON PROCESS MANAGEMENTType 3051CGManuf. Partno. 3051CG-5-A-2-2-A-1-K-B4-I1-L4-M6-Q4Class Transmitter, Pressure, Electric
Area General
Explosion protection : EEx ia Description : GaugeGas-group : IIC Description : Smart, hart protocol
Temperature class : T5 Supply : 10.5 - 55 V DC
Approval authority : BASEEFA Mounting : Coplanar flange bracket for
Certificate : BAS 97ATEX1089X pipe or panel
IP-Class : IP66
ATEX group : II Material
ATEX category : 1 Body material : Stainless steel
ATEX explosive atmosphere : G Filling fluid : Silicone oil
Ambient temperature : -40 - 85 °C Seal material : Glass filled TFE
Process connection material : Stainless steel
Dimensions and Weight Non process cover material : 316
Weight : 4.7 kg Flange bolt material : 316 AUSTENITIC
Drain/vent material : Stainless steel
Function Diaphragm material low pressure : 316L
Range : 0 - 13800 kPa connection
Span limit minimum, Pressure : 138 kPa Diaphragm material high pressure: 316L
Span limit maximum, Pressure : 13800 kPa connection
Alternative Range : 0 - 138 bar Bracket material : Stainless steel
Alternative span limit minimum, : 1.38 bar Bracket bolt material : Stainless steel
Pressure Adapter bolt material : 316 AUSTENITIC
Alternative span limit maximum, : 138 bar
Pressure Process Connection
Output signal : 4 - 20 mA Connection design : NPT
Accuracy : +/- 0.075 % Size : 1/4"
Display type : LCD Thread pitch : 18 thr/in
Static working pressure : 3626 psi
Supply Connection
Supply connection design : Metric threaded
Supply connection size : 20 mm
Thread pitch supply : 1.5 mm/thr
Comment
Accuracy for span greater than 10:1 of URL. Power consumption 18-36
mW. Load limitation: 587 Ohm. Static pressure value valid within transmitter temperature
spec. Output: Digital signal based on hart protocol. Coplanar flange Intrinsic Safety and
Dust approval. Calibration data sheet (5 points calibration at 0%, 25%, 50%, 75%, and 100%
of range)
1 09.11.2006 14:44 Generated by P.M.
Rev. Date Issue/description Prepared Cheked Disc. Appr. Client. Appr. Page 1 of 1
Target data XSLT
transformationsXML document
Schema
Target data XSLT
transformations
Source data XSLT
transformationsXML document
Template Definition Tool
Schema
Template Library
Standard Project IDS
Longhand templates Rules (SWRL)
Inference & Consistency check
(OWL DL)
Source System
ISO 15926 DM
ISO 15926 + PCA RDL
ISO 15926 Project DB
The IDS Converter, Optional Use
The IDS Converter, Using Facades
XML document
Schema
Source System
Schema
Target SystemISO 15926
FacadeISO 15926
Facade
Template Definition Tool
Template Library
Template Definition Tool
Template Library
(1)
ISO 15926 DM
ISO 15926 + PCA RDL
Implementation
• Support industry needs for – Common terminologies– Data exchange– Common frameworks– Data validation
• The need: Ontologies and business rules• The solution: OWL and rule languages
– SPARQL– SWRL