Temaline Solutions Tema Access Control...Temaline Solutions Section 5. : Access Control Solutions...

SECTION 5: page �

Temaline Solutions

Section 5.�: Access Control Solutions

Honeywell’s total new concept in access control, integrated security solutions and security system communications.

Temaline re-defines the concept of access control sub-systems for the future by bringing enhanced performance and reliability

to installations. Temaline establishes a new benchmark in providing secure solutions to protect people, property and assets.

The complete modularity of the system frees the peripheral and field devices from reliance on the central supervisory system

for all access control functionality and relieves the supervisory system of card transaction processing.

Most systems today have too

many vulnerabilities. A failure of the

central supervisory system or loss of

communications causes untold problems in

any organisation.

Availability

Peer-to-peer communication allows the

system to work autonomously and completely

without degradation of performance or

security, without the supervisory system.

System availability is furthermore enhanced

by a ‘Shared Load’ concept undertaken by

smart TemaServers. When one TemaServer

fails another ‘takes over’ the management

of its TemaKeys, without suffering any

degraded operation in the system. A

removable FlashEprom cartridge guarantees

complete data recovery on any TemaServer.

Expandability

From small to large complex facilities, there

is a need for a flexible solution. System

installations are ‘living’ entities, constantly

changing and expanding to meet the facility

environment. Temaline’s design concepts

of modularity and openness address this

requirement exactly. When expansion

is required, simply add what is needed,

without having to add intermediary devices

such as terminal servers or extensive

reprogramming.

HEADQUARTERS

REGIONS

BRANCHES

SECTION 5: page �


Temaline Solutions

Peripheral Controllers: The TemaServer

is the heart of the system architecture.

l The design concept establishes a new

benchmark for features and functions of

a peripheral device

l The enhanced distributed intelligence

and peer-to-peer communication

creates an operating environment to

allow multi-application devices, including

access control, time and attendance and

intruder detection

l For a unique level of security, continuity

and performance, TemaServers feature

a Shared Load function. During normal

system operation, each TemaServer

manages its devices but, should one

of the TemaServers fail, the remaining

TemaServer takes over the management

of the orphaned devices without

any degradation or loss of system

functionality

Field Devices: The TemaKey devices

are the connection of the system with

the company’s employees, visitors and

subcontractors.

l Through a modular Plug & Play

approach, TemaKey can meet any

customer variable in a facility

l TemaKeys are composed of any

combination of readers, displays,

keyboards, digital sensors, actuators

LONWORKS

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

TemaKeys

TemaKeys

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

Peer-to-Peer

TemaKeys

LONWORKS

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

TemaKeys

LONWORKS

SECTION 5: page �

Temaline Solutions


An Open Environment

Temaline meets openness at three

levels:

l Shared database functionality allows

customers to use their own company

database to manage cardholder

database information

l Ethernet networks with TCP/IP

communication protocols; there is no

longer a need for additional terminal

servers. Temaline’s communication

structure matches exactly customer IT

philosophies both now and in the future

l LONWORKS® – compatible field

devices guarantee the ability to interact

with other devices including: building

management applications (HVAC,

lighting etc.) and fire alarm systems

The same TemaServer platform manages

different applications such as access

control, time and attendance and intruder

detection. No other system provides this level

of security systems integration capability.

Temaline’s communication protocol allows

real-time event management and direct

panel to panel communication.

Shared Database Application

Database technology is a critical element

in the operations of a security system

today. Temaline is designed with a powerful

database distribution engine (DBDE) which

manages the database updating to the

TemaServers.

Save On Costs

The advent of Enterprise Resource

Management providers, such as SAP®,

Oracle, PeopleSoft and others, are also

increasing customer focus on systems

integration and the openness as they

seek ways to tie their facilities into singular

interacting systems to save on operational

costs.

This shift in influence has been felt most

strongly in the inter-relationships between

access control, time and attendance and

payroll applications.

Honeywell has been actively installing

SAP® approved solutions for over 10 years

and now a new capability is here – a SAP®

certified application meeting the validation

of SAP® for time and attendance and access

control and all are on the same hardware

platform.

l Distributed, uninterruptible and intelligent

power supply is totally independent from

the data wiring, so many power supply

modules can be located on a system to

provide the necessary power specific

field device groups

l Service and maintenance diagnostic

tools perform remote monitoring on all

Temaline devices. Diagnostic features

can be implemented as embedded

functions of the terminals or as external

tools

l Remote maintenance provides for

read/restore/edit functions to all system

configuration parameters

SAP is registered trademark of SAP® AG

The Complete Honeywell

Security Solution

As one of the world’s leading security

companies, Honeywell understands

the need to protect people, assets

and intellectual property. With an

international network of skilled people,

state of the art technology and global

experience, Honeywell can meet

individual customers needs with

complete security solutions.

l Providing help with all aspects of a

project from initial needs analysis

through designing systems and

managing installation, to providing

ongoing maintenance and systems

operation

l A comprehensive understanding of

security requirements, technologies

and innovations

l Being there to help customers,

whenever there is a need

SECTION 5: page �

10 Reasons to Specify Temaline


1System AvailabilityStandalone capabilities of the controllers ensure complete autonomy of the access control system.

2ReliabilityA product from a world leader in Advanced Access Control Solutions with a proven performance on thousands of projects.

3ExpandabilityBased on native TCP/IP Ethernet communications ensures that the system is able to expand as requirements expand.

4Multi-Site ManagementTemaline allows management of a single building, to a multi building campus or a global solution covering any number of facilities with single or multiple operator stations.

5Powerful Integration CapabilityAs a key solution from the award winning Enterprise Buildings Integrator facility management central, Temaline is able to integrate with CCTV, Fire, HVAC, Asset Management and many other building automation technologies.

6Integration of �rd Party TechnologiesTemaline can integrate with existing card readers via industry standard Wiegand interface. Multiple reader technologies on a single door can also be managed. Integration into 3rd party ERP’s systems such as PeopleSoft, SAP, Oracle and many others is available using standard tools.

7Durable System LifeWith a proven record of very low Mean Time Between Failure (MTBF) as well as flash upgradeable operating firmware, Temaline provides a lifetime of functionality and reliability.

8Multi Functional SystemTemaline has been designed not only to support advanced access control applications, but also advanced Time and Attendance applications (including HR and Payroll integration), Electronic Visitor Management and many more advanced applications.

9Multi Application DevicesTemaline’s unique range of multi function card readers and HMIs allows not only advanced access control applications but also Time and Attendance, Intruder Detection, Bulletin Board Service, Muster Station functionality and much more.

10IT Infrastructure CompatibilityNative Ethernet, Microsoft Windows and SQL and other features ensures that Temaline is able to operate with existing IT services.

HEADQUARTERS

REGIONS

BRANCHES

SECTION 5: page 5

Temaline Specification Data


KEY FEATURESl Provides a simple, three-level

architecture. The supervisory level is

managed by Honeywell’s Enterprise

Buildings Integrator™ (EBI) and provides

the Human Machine Interface

l At the peripheral level the TemaServers

(controllers) manage the peripheral

database containing all the information

essential to ensure the complete

autonomy of the devices independent of

the supervisory level

l TemaServers communicate on a

peer-to-peer basis with one another

and exchange data in order to share

information in a distributed mode

creating greater system autonomy

l The field devices – or TemaKeys

– represent the interface to the

“environment” such as employees and

visitors, doors and turnstiles. TemaKeys

represent readers, displays, keyboards

and Input/Output modules

l Controllers use industry-standard TCP/

IP networking over Ethernet leveraging

the facility’s existing Ethernet network.

Controller to field communication

is managed using an Echelon

LONWORKS® network

l Applications include integrated Access

Control, Time & Attendance, Intrusion

Detection, Reception Management

LONWORKS

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

TemaKeys

TemaKeys

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

Peer-to-Peer

TemaKeys

PersonalBadge

RDR

EquipmentBadge

LONWORKS

SECTION 5: page �



The modular design of the system frees the

controllers and field devices from reliance

on the central supervisory system for all

access control functionality and relieves the

supervisory system of the responsibility of

card transaction processing.

ACCESS MANAGEMENT

AND CONTROL

The basic goal of the Temaline Access

Control system is to ensure the security and

safety of the resources – people, assets,

documents, intellectual property – present in

a specific area, while still allowing authorised

users easy, but controlled access.

The Temaline system philosophy is as

follows:

l People Management – extend the

Access Control solution to also

include intrusion detection and Time &

Attendance

l Robust Solutions – high reliability and

availability

l Connectivity – direct Ethernet

connection to standard local or wide

area networks

TIME AND ATTENDANCE

MANAGEMENT

The Time and Attendance Manager is a fully

integrated software module within the EBI

Temaline Access Management and Control

application. As a result, database entries

need only be done once for each cardholder

and application.

In addition to the integral Time & Attendance

Manager, EBI Temaline has the ability to

interface to SAP®, Oracle and PeopleSoft

systems as well as other third-party

applications.

The same controllers and field devices

used for Access Control also manage

Time & Attendance functionality simplifying

the system architecture, design and

engineering.

INTRUSION

DETECTION

Integrated security requires interaction

between all security functions. EBI Temaline

accomplishes this via the concept of

“integration by design” using the same

core software, hardware platform,

database and the same field bus wiring.

All controllers, regardless of their specific

function communicate on a peer-to-peer

basis. The TemaServer is able to manage

a low-level intrusion detection strictly

integrated with access control. This task is

carried out using a TemaKey dedicated to

the management of digital input / output

signals. Each TemaServer is able to manage

up to 64 digital inputs and 64 digital outputs

and each I/O can be enabled/disabled/

armed/disarmed. The TemaServer device

continuously checks the status of the field

points controlled in order to detect a status

variation.

RECEPTION

MANAGEMENT

The term “reception management” refers to

all activities associated with checking in and

monitoring external persons who enter the

building. Typical activities include

l Checking in visitors on arrival

l Checking out visitors on departure

l Pre-registering visitors

l Keeping an address book of all company

contacts

l Collecting and performing historical

analysis of visitor data

l Assigning and administering the return

of temporary cards

LOSS

PREVENTION

The Asset Loss Prevention solution is

designed to control the rights of a cardholder

to exit/enter from a controlled location while

in the possession of specific, identifiable

assets.

SECTION 5: page �



PRIMARY SYSTEM CONCEPTS

The concept of “Integration by Design” is

the core philosophy of the EBI Temaline

architecture. Dedicated software allows

users to determine the operational

parameters for the chosen subsystems

– including Access Management &

Control, Time & Attendance, Intrusion

Detection, Reception Management and

Loss prevention. These design disciplines

create seamless inter-operability and a more

secure functioning system.

Access Management and Control

The access control platform of the EBI

Temaline subsystem guarantees one of the

highest levels of availability of any system

on the market today with multiple layers of

redundancy, peer-to-peer communication

and the highest marks for application

flexibility designed as standard in the

system.

The system controls and monitors the

peripheral hardware, stores all data received

via the same hardware devices, and makes

the data available for analysis.

The system operator can perform operations

such as:

l Check the number of users present in

each area

l Execute antipassback controls

l Execute “length of stay” checks on the

users

l Check the list of visitors that entered at a

given time

l Check the number of available parking

spaces in the parking lot

Time & Attendance

The Time & Attendance platform of EBI

Temaline allows administrative users the

ability to communicate with the company’s

employees via the field devices and

terminals.

The system manages the information

associated with the various clock-in and

clock-out operations and makes it available

to Time & Attendance applications such

as the EBI Temaline Time & Attendance

Manager or SAP®. The bi-directional

functionality also allows messaging from

administration to employees providing

broadcast or individually tailored messages.

A system user interacting directly with the

terminal display can execute the following

operations:

l Reason entry – specifies a transit reason

l Transit enquiry – interrogates the system

directly regarding past transit operations

l Generic enquiry – displays various

user-specific information requested by a

cardholder

l Spontaneous messages – display

personal information addressed either to

the cardholder or to a group, following a

card read operation

l Electronic bulletin board – displays

information addressed to all cardholders

who use the terminal

Intrusion Detection and Security

The EBI Temaline subsystem’s intrusion

detection platform ensures a high level of

security by allowing operators to monitor all

the events and alarms generated in a facility

in a single user interface.

The system immediately detects when

an intrusion sensor is activated, when a

gate is forced or when a communication

line is interrupted, and alerts the operator

concerned. The operator also receives

detailed information describing the alarm

or event as well as the required response/

action. Subsequent analysis of the events

and corrective actions taken by operators

facilitates the continued improvement of

security and control procedures and also

ensures continuous improvements to

company safety standards.

Remote access via either dial-in or Wide

Area Network (or LAN) connection or EBI’s

Alarm Pager option (providing notification via

SMS, e-mail, pager or SNMP) allows alarms

to be managed from remote workstations or

security centres, which is a great advantage

for installations that are not attended or

guarded 24 hours per day.

Asset Tracking & Loss Prevention

Asset Loss Prevention provides additional

security over a Real Time Location System

(RTLS). This option provides the ability to

not only locate assets within a facility but

also control the movement of assets in and

out of protected areas. Assets are equipped

with active, radio frequency tags that allow

them to be uniquely identified and they can

be linked to people, who are identified by

means of their access cards.

The system uses a combination of long-

range readers, transmitters and Temaline

devices connected together to form a

special Asset Portal (AP). In its simplest

form, the Asset Portal is a double technology

TemaKey, in which one reader is the radio

frequency receiver and the other a Temaline

reader.

SECTION 5: page �



LAN/WAN

EnterpriseBuildings

Integrator™(EBI)

TemaServers

RTLS Reader Prox Reader

Does this Person have authorisationto remove this Asset?

The diagram above illustrates a typical layout

for the entrance/exit area of a building when

creating an Asset Portal.

Reception Management

A visitor’s first impression of a company

is often the reception area. Providing an

efficient and professional reception service

is the first step in creating a positive

impression for visitors.

Temaline Reception Manager provides an

optional solution for managing visitors to a

facility and provides complete integration

Asset Loss Prevention System Concept

with the EBI Temaline access control

system. The seamless integration is critical

as it provides levels of security and visitor

control that cannot be provide by stand-

alone solutions.

In addition to capturing visitor data, the

visitor management package also permits

the issuing of visitor access cards and

temporary staff cards while the powerful

reporting capabilities help identify the

location of visitors present in the building at

any given time.

Temporary and Visitor Cards

Temporary and Visitor cards are configured

in the system and then physically stored

in an archive kept by reception staff. The

cards can then be issued and enabled

on demand – either for a new visitor or an

employee whose card has temporarily been

misplaced.

Visitor Pre-registration

Visitor pre-registration helps speed up the

visitor check in process by allowing staff to

enter details for their visitors prior to their

arrival.

The reception has access to an on-line list

of pre-registered visitors and simply have

to complete any outstanding details, issue

a card (or print a pass) if needed and start

the visit.

Visitor Check-in/Check-out

The reception desk manages all visitor

check-in/out operations including:

l Record personal and identification data

l Use the address book to identify a

contact person for the visit

l Record all data concerning the visit

and, if appropriate, assign a card and

associated access rights

l Print a visitor’s pass on paper or card

l Suspend and continue a check-in

operation to allow time to trace the

desired contact person

l Terminate the visit if it is not possible to

trace the desired contact person

l Modify data associated with the current

visit without terminating the visit itself, for

example, extend the card expiry date or

enter notes regarding the visit

Asset Loss Prevention Gate Configuration

SECTION 5: page �



WEB Reception Management

The WEB Reception Management

module improves the Reception Manager

functionality by providing an Internet

Explorer-based web browser connection

to the Reception Manager database. The

browser connection provides more stations,

better performance and reduces engineering

by eliminating the need for manual software

installation.

The functionality includes:

l Customised Human Machine Interface

l Check-in and check-out of visitors

l Visitor pre-registration

l Temporary card assignment and return

l Cardholder present in zone report

l User status

This option requires:

l The Reception Management option

l A Microsoft SQL Server Client

Access Licence (CAL) for each

computer using the browser based

solution.

Photo ID

EBI Temaline PhotoID is a fully integrated

function that enables the user to create

identification cards for users of the system.

The functionality includes;

l Image capture (including cardholder

photographs and signatures)

l Image storage in a variety of formats

such as bitmap, JPEG or GIF formats

l Integration of dynamic data from the EBI

Temaline database to the card layout for

printing specific cardholder details on

cards.

l Custom card graphic creation.

l Card printing

The integrated graphic design tool provides

the ability to create flexible and personalised

card layouts. Cards can be printed with

information specific to the cardholder such

as the cardholder’s first and last name,

additional personal data, a photograph and/

or a signature.

Cards can be used for visual identification

only, or as physical access cards that

are part of the electronic access control

system.

Interface to external applications

Access management systems are normally

integrated to third party or external systems

in order to exchange personnel data, either

to update cardholder details or to provide

transaction information to Human Resource

applications such as Payroll programs or

general Time & Attendance management

systems.

Temaline provides a flexible Time &

Attendance management solution allowing

the collection of entry and exit transaction

details using the employee’s standard

access card and, very often, the same

readers used for access control.

EBI Temaline supports the following

operations:

l Creation of data import/export and

conversion specifications

l Interaction with external applications

l Data export, manually or on-line

l Interaction with the HR-PDC Interface for

SAP R/3 for data import and export.

Personal data of the company’s employees

is imported from the Time & Attendance

application software. This application can

be a stand-alone application or part of a

complete Enterprise Resource Planning

solution such as SAP® or PeopleSoft.

User Access to the Web Reception Manager The Visitor Check-in/Check-out Form

SECTION 5: page �0



SITE A

SITE C

ETHERNET

SITE B

Enterprise Resource Management

Temaline provides the ability to interface to

common Enterprise Resource Planning

solutions such as SAP®, Oracle or

PeopleSoft.

EBI Temaline uses an SAP® Certified

Integration module for integration to the

mySAP Human Resource application

module via the HR-PDC channel. The

bi-directional HR-PDC interface allows

personnel data transfer from the SAP®

master database to EBI Temaline and the

transfer of transaction data – complete with

specific reasons and time codes for Time &

Attendance – to SAP®.

SYSTEM

ARCHITECTURE

The EBI Temaline solution can be grouped

into three distinct levels:

Supervisory Level

The Supervisory Level comprises the

Enterprise Buildings Integrator and Temaline

software and has the following primary

functions:

l System configuration

l Data collection

l Event analysis

l Reporting

l Interface to external applications

Peripheral level

The peripheral level is where most decisions

are made and it is made up of the controllers

(TemaServers) responsible for the Access

Control, Time & Attendance and Intrusion

Detection applications.

TemaServers are usually connected to the

Local Area Network via a dedicated Ethernet

port and use peer-to-peer communication

to exchange data and commands with one

another. The TemaServers can therefore

take all decisions locally, once configured,

removing dependence on the Supervisor

Level and improving system autonomy.

The TemaServer is battery backed and the

Temaline power supply modules can power

any associated devices. These modules

provide up to 4 hours of operation after

failure of the mains power supply. In the

battery backup status, the system reduces

the power consumption (e.g. backlight) but

does not suspend functionality for gate

control, communications, or other critical

management actions.

TemaServers are used to manage single

devices such as individual card readers,

displays or keypads as well as integrated

units that are built out of several single

devices (e.g. reader and display, display and

keyboard, reader and display and keyboard).

The TemaServer is able to logically assemble

simple devices to form a virtual terminal

responsible for managing a door.

Each TemaServer supports the management

of up to 12 doors, using either a single reader

for entry or a reader for entry AND a second

reader for exit. TemaServers support up

to 24 readers per controller, depending on

system configuration.

SECTION 5: page ��



Field level

This is the level where the system interacts

with the external world (company employees,

visitors, gates, etc.). It comprises readers,

displays, keypads, locking devices, digital

sensors, and other devices.

LON

Temaline uses the Echelon communication

bus as the field bus for TemaKeys, Tema

Power and I/O devices. Each LONWORKS®

bus can support up to 64 nodes or devices

(readers, I/O modules, etc.). As with any

LONWORKS® communication bus, in a

“daisy-chain” configuration, the total length

of the LON bus cannot exceed 2700 metres.

In a “free-topology configuration, the length of

the total LON bus cannot exceed 500 metres.

PEER-TO-PEER COMMUNICATION

In order to maintain high availability and

flexibility of the system, the TemaServers

communicate with one another on a peer-

to-peer basis.

Each TemaServer is continually updated

with system status regarding employee

presence, number of people present in each

zone, and details for anti-passback control

amongst others.

In order to avoid unnecessary information

exchange, TemaServers can be

logically grouped and the peer-to-peer

communication limited to the group. This

creates consistent high-performance

response. Communication over Ethernet is

managed via the TCP/IP protocol stack.

SHARED LOAD

The purpose of the Shared Load

architecture configuration is to enhance

system availability. The system has the

capability for it to protect itself in the event of

a TemaServer failure, as shown below.

This added level of hardware redundancy

is achieved using redundant pairs of

TemaServers. During normal system

operation, each TemaServer manages its

devices but, should one of the TemaServers

fail, the remaining TemaServer takes over

the management of the orphaned devices

without any degradation or loss of system

functionality.

LAN

EnterpriseBuildings

Integrator™(EBI)

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

Peer-to-Peer

TemaKeys

LONWORKS

ETHERNET

EnterpriseBuildings

Integrator™(EBI)

TemaServers

TemaKeys

LONWORKS

Peer-to-Peer Communication

Shared Load




MULTI-SITE

The multi-site functionality is a logical

concept that can be used with only one

server or over a Distributed System

Architecture (i.e. multi-servers) to manage

the TemaServers and peripheral devices

installed over a Wide-area Network (Wan).

Multi-site allows the management of up to

255 different sites per system. Each site

has its specific terminals, behaviour models,

calendar and zones. The employees,

visitors, vehicles, available cards can be

enabled to have multi-site capabilities. Using

this function information can be distributed

in the most suitable manner relating to

employees, visitors, vehicles and available

cards to the appropriate sites.

The multi-site functionality is often used in a

campus or business park type facility.

HARDWARE COMPONENTS

TemaSeRveR

The TemaServer is the heart

of the Temaline architecture.

Each TemaServer has its

own database and is able to communicate

with other TemaServers via peer-to-

peer communications. It represents the

distributed intelligence of the system

providing an operating environment that

seamlessly supports inter-operability of

Access Control, Time & Attendance and

Intruder Detection.

TemaServers connect to the EBI Temaline

Supervisory System via Ethernet. The

connection between the TemaServer and

the field devices is via Echelon bus protocol.

TemaPOWeR

The TemaPower is an active power supply device that does not only supply power, but is

also able to exchange messages with the TemaServer controllers thus providing continuous

information on the status of the main power supply and of the batteries.

In emergency situations, the devices can be configured in a redundant mode. Each device

then has the ability to manage additional TemaKeys normally managed by another Tema

Power, which is temporarily in failure.

muSTeR STaTiOnS

The Muster Station provides

the ability to electronically

manage a muster point in the event of an

emergency. Any TemaServer or TemaKey

equipped with a graphic display can be

configured as a Muster Station. Cardholders

are linked to a Muster station via the

behaviour models as for the other types of

readers in the system.

Each Muster Station supervises specific

zones of the plant displays a list of

cardholders still present in these zones

(including detail on their last recorded zone).

Proper site mustering is a critical requirement

for any facility that requires a structured,

secure and on-line evacuation plan.

TemaKeyS

The TemaKey devices are the

interface to all cardholders

(e.g. company employees, visitors and sub-

contractors). The modularity of the devices

allows each customer to select the right

TemaKey to suit their requirements.

In its smallest form, a TemaKey is a single

reader but larger TemaKeys can also include

additional readers, displays, keypads and/or

I/O modules.

Standard reader technologies supported

include:

l Magnetic stripe

l Proximity – HID, Motorola, NexWatch,

Sokymat, and others

l LCD devices – 16 characters x 2 rows

and graphic display with 16 lines x 40

columns

l Wiegand interface devices

l Digital I/O devices

l Specialist smart card technologies

including: Mifare, Legic, ST Micro and

others

TemaPower A TemaPower B




SYSTEM FEATURES AND

FUNCTIONS

General System Configuration

System configuration engineering can be

accomplished completely from the EBI

supervisory level – on-line – using an EBI

station, without affecting the operation of

the system.

Updating is automatically initiated and is

carried out involving only the modified

details to the TemaServer. Only the essential

updated information is sent thus avoiding

unnecessary operations and network

traffic and also minimising the download

time for database changes. TemaServers

are also able to receive update versions of

the firmware and other basic tables using

standard tools like Telnet and TFTP.

Using the same tools is also possible to

download all localisation data (strings,

date formats, currency) or to download the

firmware to the TemaKeys – in this case the

download is done via the TemaServer. The

TemaServer acts only as a gateway between

the supervisory level network (TCP/IP) and

the field level network (LonWorks).

Data Collection

The supervisory level collects data as clock-

in and clock-out transactions, events such

as I/O and other “objects” status changes

coming from the peripheral level and device

failure messages. All this information is

characterised by a priority that determines

when they are sent: events are sent first

followed by transactions, based upon

priority.

“Reasoned” Transactions

Reasoned transactions allow cardholders to

associate a specific reason with a cad

transaction. This is normally used in Time

& Attendance to associated extraordinary

transactions with reasons such as leaving

for a doctor’s appointment.

In the case of Time and Attendance, the

normal behaviour of the TemaKey when a

‘reason’ is entered is:

�. The reason is chosen by the cardholder,

using a function key or selecting a

choice in a menu of reasons associated

to a function key

�. The card is presented to complete the

transaction.

Information Point

The information point functionality is available

only on a TemaKey with a reader and a

graphic display. There are different ways to

present information to the cardholder:

l Bulletin Board – the bulletin board is a

message displayed by the LCD when it

is in an idle condition (there is no other

activity in progress). Configuration is

done at the supervisory station.

A text message can also be set that

could be a “Welcome” message,

Company name or any other message

as defined. These messages are

supported by user-friendly configuration

software in order to allow easy tailoring

of the functionality.

l Inquiry – The cardholder request

information in the following way:

�. The type of information is chosen by

the cardholder using a function key

or selecting a choice in a menu of

information associated to a function key

�. Presenting a card. The inquiries are

requests of information that can stay

on the TemaServer or EBI. Inquiries are

always personal information.

Transactions Inquiry

The Transactions Inquiry functionality gives

cardholders the opportunity to view and

check their transactions.

The transactions are shown complete with

the relevant information such as the date

and time, the direction and the reason

associated to the transaction.

This functionality is managed by the EBI

Temaline Interface and the Temaline

peripherals and does not require any

maintenance activity, human intervention or

interface to other applications.




General Inquiries

Configurable information available to the

cardholder that is contained within the

application such as time and vacation

balances.

Event Analysis

The event analysis functionality allows

the operators to display and analyse the

historical data stored in the system. The

operator can define:

l What data to display

l Which filters to apply to the data in order

to show only events that satisfy certain

defined criteria

l What information applies according to

the content of the fields

Spontaneous Messages

Spontaneous messages are alphanumeric

and displayed automatically on the terminal

following a clock-in or clock-out operation.

The operator can also define spontaneous

messages;

l Associated to a specific employee

– addressed exclusively to the person in

question

l Associated to a specific display i.e.

to the TemaKeys that use the primary

object in question. All authorised users

who transit at the TemaKey can then

view these messages

Spontaneous messages can be configured

for all displays, with the following limitations:

l Alphanumeric display: a single line of 16

characters

l Graphic display: 4 lines of 32 characters

The Spontaneous Message functionality

gives the opportunity to show a message

to the cardholder using the terminal,

simultaneously with the transaction

information. The message can be specific

for the terminal, for the cardholder, or for

a group of cardholders. Examples include

time limits for an individual to complete a

specific personnel task such as special

training or a group of individuals who might

be required for medical exams or a meeting

room is changed.

Dial Up Communications

The Temaline system architecture supports

point-to-point communication between the

TemaServer and the supervision centre

via Dial-up. This communication can be

used as an alternative to the LAN Ethernet

connection (as primary connection), or can

be used as a back-up connection (primary

connection in LAN Ethernet, secondary – or

back-up connection – in point-to-point).

The point-to-point connection can be

established in dial-up (modems) or using a

direct line connection (null modem, RS232

connection). The point-to-point connection

can be established both from the Tema

Server and from the Supervision Centre in

the following ways:

l Manual call from Supervisor centre

l Scheduled connection (both from centre

and peripheral level)

l Automatic (started by a Supervisor

centre commands or by a Peripheral

event/alarm)

The supervisor centre has the capability

to manage a group of modems; the

TemaServer can automatically select the

first non-busy line on up to 4 supervisor

centre telephone numbers.

Transits are not sent in an on-line manner, but

only on specific scheduled time periods. If

there is no connection between TemaServer

and supervision centre, the transits are

stored into the ‘transit buffer’ and sent to

EBI centre once the connection is establish.

If the ‘transit buffer’ level exceeds the 80%,

the TemaServer establishes automatically a

connection to decrease the occupancy of

the buffer.

From the point of view of events it is possible

to specify time periods (hours for day and

days of the week) in which the events are

sent using the point-to-point connection.

TRANSIT CONTROLS

Gate control

In its simplest form, Gate Control is the same

as a standard functionality of electronic door

access control. The main job of the Access

Control TemaServers is to control one or

more gates (doors, revolving doors, turnstiles,

etc.) in a single or bi-directional way.

The TemaServer monitors the gate status

and controls the door strike – both are

managed by an I/O device.

The TemaServer controls the gate both

when there is a request for transit and when

the door is closed (idle condition). In this

case the TemaServer treats the two readers

as a single door, conserving door count per

TemaServer.

l When there is a request for transit

and the cardholder is authorised, the

TemaServer opens the gate, checking

for the right transit sequence. A transit

sequence is a collection of steps related

to the gate characteristics (turnstile,

revolving doors, etc).

Gate Control




The following are basic commands related

to the gate management;

l Open the gate for a single transit

checking for the right transit sequence

(for entrance)

l Open the gate for a single transit

checking for the right transit sequence

(for exit)

l Open the gate – the gate remains open

until a “normal condition” or a Close the

gate command is issued

l Close the gate (lock) – the gate remains

closed until a “normal condition” or an

“open the gate” command is issued,

l Normal condition – return to normal

modality

l When a “return to normal” command

is issued, if alarms are still present, the

alarm message is resent

Anti-passback

Anti-passback is used to prevent a card

being passed back to a following individual

to gain entry.

Cross-controller anti-passback is achieved

in the system through using the peer-to-

peer communication capabilities of the

TemaServers. In addition, the standard and

globally anti-passback have special “time

out” functionality that restricts re-entry by

cardholder within specified times. In other

words, even when a valid cardholder makes

a valid exit, the “anti-passback time out”

disallows re-entry before a specified time

(e.g. 10 minutes).

It is possible within the Tema system to have,

not only, global anti-passback, but also anti-

passback for a given number of zones.

To enable the anti-passback control, a

TemaKey must be configured with two

zones associated: the starting zone that is

the zone that the cardholder is leaving and

the destination zone that is the zone where

the cardholder will enter. The anti-passback

controls establish the zone in which the

card is currently located, and checks that

each subsequent card scan operation is

consistent with this information.

Escort Control

The escort transit control ensures that a

transit is granted only when two transactions

in sequence are performed with two different

cards.

This functionality can also be used to

manage vehicles associated with individual

people, or their access to specific area

based on the required “double permission”

as well as for visitor escort.

The feature is based on:

l Enabling a TemaKey to manage dual

transits

l Enabling an employee card, a vehicle

card, or a visit card to enable a coupled

transit

“One Shot” transits

In facilities visited often by supply vehicles,

there is often a requirement to enable the

vehicle for a single transit or for a single

entry and a single exit.

Number of people present in an

area (minimum and maximum)

This functionality is an important safety

feature for the Tema system. The number

of individuals present in an area can be

managed and controlled. This functionality

allows that in a defined area there cannot

be present less then a specified minimum

number of people or more then a maximum

number selected.

The Anti-passback control can also

be activated if needed in applying this

functionality. It is also possible to define

whether the gate has to be opened even if

the check fails. In this case only a warning

event is sent to the supervisory level.

Path control

Path control allows the system to grant

or deny transit at a terminal on the basis

of rules that verify the historical use of the

card requesting the transit, whether in terms

of the TemaKey utilised for the preceding

transits or in terms of the time elapsed since

those transits.

In particular, with Path Control, the operator

may set the rules that must be respected for

access through the terminal. The following

describes the three possible scenarios that

can be utilised for this type of control:

l Correlated transit among TemaKeys

l Mandatory Path

l Timing Barrier

Correlated transit among TemaKeys

In order for a transit to be granted at the

terminal, it is necessary for the user first to

have transited through one of a particular

group of terminals. In this example, path

control is enabled in such a manner that a

user will not be able to access the canteen

before having transited the required prior

TemaKeys.




Therefore, in the example below:

l The TemaKey # 4 is associated to the

group of TemaKeys that manage an

area, for example the Canteen (Group 4)

l TemaKeys # 1 and 2 are associated to

the Group 1

l The control rule that is to be associated

to the terminal # 4 must verify the

preceding transit through the terminals

associated to the Group 1

Timing Barrier

In this instance, the terminal verifies both

the terminal group through which the user

has transited as well as the time elapsed

between transits before making the decision

to allow access.

For example, a timing barrier can be

established between a TemaKey associated

with Group 8 and a TemaKey associated with

another Group – say 7. The rule associated

with Group 8 will verify whether the user has

transited at any of the terminals associated

with Group 7 within a configurable time (less

then 24 hours or 1440 minutes).

Note: This type of control is a multi-gate

control. It relies on information from several

gate control terminals and, if communication

with one of the terminals involved is

interrupted, the control can no longer

be guaranteed. In this case, the system

automatically degrades the functionality

and disables the control until the conditions

necessary for reliable execution are

restored.

TIME AND ATTENDANCE

TRANSITS

The EBI Temaline Interface provides the

ability to define a specific use for each

TemaKey based on the specific transaction

for which the terminal/reader will be used.

These include:

l Access Control

l Time & Attendance

l Canteen

l SAP®

The Time and Attendance (T&A)

transaction is generally used to support

T&A requirements of HR departments and

payroll. EBI Temaline provides the required

transactions via ASCII file, Excel file or via a

database table.

EBI Temaline allows the user to manage

T&A transactions, not only covering the

company’s employees, but also for external

personnel such as consultants, contractors

or employees of sister companies.

Canteen Transits

EBI Temaline provides the ability to check

the number of canteen transits allowed

and executed for each cardholder per day.

TemaKeys are configured specifically for this

purpose and the information is collected by

EBI Temaline and then normally exported

to an external application for canteen

management.

Reasoned Transactions

A reasoned transaction is a transaction that

includes an associated code identifying

a specific reason in addition to the normal

information such as the card number, the

date and time of the transit, the transit

direction and the terminal identification.

Reasoned transactions are extensively

used for T&A transactions in order to allow

cardholders to identify an exceptional or

unusual transit. A reasoned transaction can

also be used to send feedback to activate/

deactivate the lights of an office or enable/

disable the intrusion detection of an area.

Length of Stay Controls

EBI Temaline has the ability to verify the

amount of time that a user remains in a

security-sensitive zone. This can be done

based on two thresholds:

l High pre-alarm threshold: indicates

that the user has remained in the zone

beyond the pre-alarm limit

l High alarm threshold: indicates that

the user has remained in the zone

beyond the time limit set for the alarm.

1

2

3

4

Mandatory Path

In the following example, a transit at

TemaKey # 8 associated with Group 8 will

only be authorised following a transit at

TemaKey # 4, associated with Group 4,

and a transit at the latter, in turn, will be

granted only after a transit at TemaKey # 1

associated with Group 1.1

3

84




Behaviour models

This function allows the user to assign

schedules to cardholders (employees,

external personnel, visitors, companies

and vehicles) that reflect their access

requirements. Behaviour Models determine

user access rights to protected areas

of a facility, and consist of a time-based

component (time periods and day types) and

related TemaKeys (or readers) for accessing

doors or gates. Users can configure up to

512 behaviour models.

Each behaviour model can consist of up to

9 blocks (or groups) of terminals and time

periods linked to specific day types, such

as the days of the week (from Monday to

Sunday), holidays, and special days.

LOCALISATION

EBI Temaline provides a simple, user-friendly

procedure for localisation and requires no

specific tool. A database table is provided

containing all necessary character strings

in English and localisation simply requires

that the translated text be entered into the

“Customised” column as shown below.




APPENDIX ITemaLine FieLD DeviCeS

Reader technologies

The Temaline family supports the following

standard reader technologies:

l Magnetic Stripe

l HID Proximity

l Sokemat Proximity

l ASP Motorola (only on TS_TA1x terminal)

l NexWatch (only on TS_TA1x terminal)

l Smart card ISO7816-4, only on RTU

device

In addition the system manages the following

special devices:

l Mifare (ISO14443A compliant) contact-

less reader

l Wiegand/BR450 adaptor to allow

integration of the BR450 (PCSC

magnetic stripe reader) to the Temaline

Wiegand device (TK_S014)

l Double reader technology terminal

for installations where 2 different card

reader technologies are required for

access to the same door (for example:

when migrating from one card type to

another)

l Legic Contactless Smart card

Integrated reader

The Integrated reader (mini-combo) provides

a reader (either magnetic stripe or proximity

card reader), keypad and liquid crystal

display (2 rows and 16 character columns)

in a single unit.

Keypad

The keypad is used to:

l Enter a PIN code

l Enter information for Time & Attendance

such as reasons

l Request information (inquiries)

Liquid Crystal Display (LCD)

All LCD’s are backlit and easily readable

from a range of 80cm to 100cm. There are

two LCD models:

l Alphanumeric, with 2 rows of 16

characters

l The Graphic Display module provides

a Human/Machine Interface with a

16-line/40- column display (240x128

pixels). This can be used to welcome

visitors, show an employee’s name at

clock in and out and display reports of

transactions (with associated reasons if

applicable). The Inquiry Mode accessed

by pressing function keys, allowing the

user to qualify a transit and/or to request

personal information to be displayed.

Digital I/O management devices

The TK C21 module provides 4 Supervised

Inputs and 4 Open Collector Outputs. The

same digital I/O management devices are

used for both access control and intrusion

detection purposes.

l All devices are able to monitor the

status of sensors via optically-coupled

supervised digital inputs

l All devices are able to command up

to 4 open collector outputs (100 mA

minimum at 50V). The module housing

is tamper protected for unauthorised

opening and removal.

Free I/O management

It is possible to share the I/O of an I/O

Module between different modular readers

(TemaKeys) or to use the I/O of an I/O

Module for both gate management and

intrusion detection purposes.

Wiegand Interface

The Wiegand interface module provides 2

Wiegand inputs, 2 monitored digital inputs

and 2 outputs to manage a single door. Up to

2 readers can be connected to the Wiegand

module provided they are controlling the

same door, one for entry purposes and the

other for exit.

The Wiegand interface can be customised to

match the encoding format of the proximity

card used.

Please Note:

l The 2 monitored I/O provided can only

be used to manage the inputs from

the related door. They cannot be re-

assigned to monitor detectors unrelated

to the transit sequence of the door.

l The 2 Wiegand lines can only be used

to manage two readers on same door

– 1 for entry and the other for exit. It is

not possible to manage 2 readers from

different doors using 1 Wiegand module.




SYSTEM CAPACITY

The following tables highlight the EBI Temaline system limits for the System, the Site and for each TemaServer. Note that the maximum

number of sites managed by the EBI Temaline Interface is 256 per EBI Server.

Object System Limits Site Limits TemaServer Limits

TemaServers 512 512 N/A

TemaKeys Depending on the number of readers licensed in EBI Base Software.

Depending on the number of readers licensed in EBI Base Software.

Up to 12 doors

RTUs 512 * 32 512 * 32 32

I/O 512 * 64 512 * 64 64

Operators 1000 depending on EBI 1000 depending on EBI N/A

Operators Visibility Rights No limit No limit N/A

Operators Profiles No limit No limit N/A

Stations Depending on the number of Client licensed in EBI Base Software.

Depending on the number of Client licensed in EBI Base Software.

N/A

Encoding card formats 32 32 32

Cardholders No limit No limits See table below for TemaServers limits based on the type of memory and configurable options.

Zones 128 * sites n° 128 128

Time Periods 32 * sites n° 32 32

Behaviour Models 512 * sites n° 512 512

Feedback 150 * sites n° 150 150

Scheduled Commands 64 64 64

Reasons 245 245 245

Enquiries 30 30 30

Menu 23, each one with max 32 entries 23, each one with max 32 entries 23, each one with max 32 entries

Groups of TemaServer (for peer-to-peer communication)

255 control zone groups

�55 control zone groups N/A

TemaServer per Control Zone group

No limit No limit No limit

Primary Object 8 8 8




LONWORKS® data cable characteristics

Type of cable Length (m) in relation to the cable capacity

AWG mm2 Ohm/Km 50nF/Km �00nF/Km �00nF/Km 500nF/Km �uF/Km

12 3.3 5.7 2676 1892 1338 846 598

14 2 8.8 2153 1523 1077 681 482

16 1.3 14 1707 1207 854 540 382

18 0.9 21 1394 986 697 441 312

20 0.6 34 1096 775 548 346 245

22 0.35 52 886 626 443 280 198

24 0.2 85 693 490 346 219 155

TemaServer Memory formatting

The following table shows the standard memory configuration of the TemaServer in the event that the controller is equipped with either the

standard memory card and with the extended memory card. This default configuration can be changed for individual TemaServers based on

individual site requirements.

Standard Memory Card Cards Transaction buffer Event buffer

Access Control 10.000 2.500 400

Enhance AC / Basic T&A (Enhanced Personal data table) 6.000 2.500 400

Interactive T&A 2.500 10.000 135

SAP 2.500 7.000 135

Extended Memory Card Cards Transaction buffer Event buffer

Access Control 60.000 40.000 5.000

Enhance AC / Basic T&A (Enhanced Personal data table) 50.000 40.000 5.000

Interactive T&A 15.000 65.000 1.000

SAP 32.000 65.000 1.000


Control unit

Section 5.�: Access Control – Control Units

Control Unit

Featuresl Supports Up To 12 doors

l Supports “Open Protocol

Readers”

l Direct LAN/WAN connection

l Supports “Messaging”

l Standard Memory supports

10,000 card holders (60,000

with enhanced memory)

l Supports SAP HR s/w

connectivity

l Optional:

l “Redundant Configuration”

l “On-Line Muster Station”

l “ Time & Attendance”

Technical Specifications

Bi-processor CPU68EN302, including a Motorola 68000 (32 bit architecture) and an Ethernet communication processor.

1 MByte FLASH EPROM to Download the application firmware.

1 MByte FLASH EPROM on a removable cartridge for the download of the permanent database (tables of the access right of the users codes for the workdays, pre-holiday and holiday days) and for the ‘Transit and Events’ Buffer. Optional memory board with 8 Mbytes FLASH EPROM available.

1 MByte RAM for the current activity.

Management of up to 8 doors with TemaKeys on both directions.

Management of up to 64 I/O.

Up to 10.000 cards and 2.500 transactions stored on a removable cartridge with Flash EPROM memory in case of connection failure with the EBI_Tema host (resulting in no losses in case of a power failure). Up to 60.000 cards and 40.000 transactions with the extended memory board. See table below for details.

Management of the peer-to-peer connection with the other TemaServer and as a consequence high decision-making capability and full operative autonomy.

Autonomous clock/calendar Chip with automatic management of regular/daylight saving time with an autonomy of 1000 hours in case of power failure.

Lead battery backup, with full functionality for 4 hours in case of network failure, and signalling of the battery-charge status.

Low voltage power-supply (12 V dc/ac) for maintenance safety.

Tamper protection of the unit to prevent opening.

Watchdog protection for recovery in case of malfunctions.

Tele-diagnostic in Ethernet connection.

Electrical Specifications

Supply Voltage 12V dc/ac -15% to +20%

Energy Consumption 3.6W (4.2W max. during recharging of a fully used battery)

Interface Ethernet (10BaseT, 10Base2, AUI) for TCP/IP-UDP connection with EBI_Tema, and peer-to-peer between the TS AC01units

Physical Specifications

Protection Degree IP55

Dimensions 221mm x 304mm x 47mm (W x H x D)

Weight 3.0kg, battery included

Environmental Specifications

Working Temperature 0ºC to +50ºC

Relative Humidity Up to 95% without condensation

Electromagnetic Compatibility 89/336/CEE; 92/31/CEE; 93/68/CEE


Control unit

Section 5.�: Access Control – Control Units

Standard Memory Card

Basic Configuration Cards Transactions buffer Event buffer


Enhance AC / Basic T&A (Enhanced Personal data table)

6.000 2.500 400


SAP 2500 7.000 135

Extended Memory Card


Access Control 60.000 40.000 5.000


50.000 40.000 5.000

Interactive T&A 15.000 65.000 1.000

SAP 32.000 65.000 1.000

ORDER CODES

Control Unit TS AC01

Memory Card Options


Compact magnetic Card Reader

Section 5.�.�: Access Control – Magnetic Readers

Compact Magnetic Card Reader

Featuresl Wall or Turnstile Mounting

l Supports LCD Messaging

l PIN Support

l Internal I/O for door control

l Echelon “LON” Device

l Optional:

l Time & Attendance

ORDER CODES

Compact Magnetic Card Reader TK C01


Integrated compact reading unit complete of display, keyboard, 2 digital inputs and 2 digital outputs.

Bi-directional reader for Magnetic cards.

Alphanumeric Liquid Crystal Display (LCD), back lit, with two lines of 16 characters each, for the visualisation of time data, guide messages for the user, and service messages.

Numeric-function Keyboard with 16 keys, to enter the pin code of the user or the reason for transit.

1 double-coloured LED signal: green LED for the correct reading of each direction and red/yellow for invalid transactions and or Messages.

Variable Tones for valid/invalid transactions.


Supply Voltage 12V dc ±15%

Energy Consumption 1.4W nominal (1.7W max.)

LonWorks cabling Interface Unshielded twisted pair cable in free topology. (Transceiver FTT10A, 78Kbps)

Digital Input 2 opto-coupled Digital Inputs

Digital Output 2 Relay Outputs (1A @ 30V)




Weight 0.5kg






magnetic Reader


Featuresl Wall Mounting


l Optional:

l Time & Attendance

ORDER CODES

Magnetic Reader TK S01

Magnetic Reader


Bi-directional reader with manual swiping, for magnetic card (track 2, ISO/ABA 7811 standard).

3 LED signals: 2 green LED for the correct reading of each direction and a dual-colour LED: Red for invalid transaction, and Yellow for Echelon Service.




Energy Consumption 0.4W





Weight 0.4kg

Mounting Horizontal or Vertical






modular magnetic Reader


Modular Magnetic Reader


Bi-directional reader for magnetic cards (standard ISO/ABA II track).


2 multicoloured LED: Green for the access granted, Red for invalid transaction, Yellow for Echelon Service function.

Keyboard composed by 10 numeric keys and 6 function keys.




Energy Consumption 2.7W (200 mA)



Protection Degree IP31 for the magnetic reader, IP55 for all the other components


Weight 1.1kg

Mounting Horizontal only




Certifications and Compliance


ORDER CODES

Modular Magnetic Reader TK T01




l Optional:

l Time & Attendance




ORDER CODES

Modular Magnetic Reader TK D01




l Optional:

l Time & Attendance




3 LED signals: 2 green LED for the correct reading of each direction and a dual-colour LED: Red for invalid transaction, and Yellow for Echelon Service function.









Weight 0.85kg







Modular Magnetic Reader




with Graphic Display

Modular Magnetic Reader with Graphic Display

ORDER CODES

Modular Magnetic Reader with Graphic Display TK D21




l Optional:

l Time & Attendance

l “Mustering”



Graphic Liquid Crystal Display (LCD) with back lit 240 x 128 pixels format, 16 lines x 40 columns, for the visualisation of time data, guide messages for the user, service messages, spontaneous messages, transaction enquiry, generic enquiry, automatic info.

14 function keys, 4 reserved for service management, and 10 configurable to manage enquiry, reasons and menu.

3 LED signals: 2 green LED for the correct reading of each direction and a dual-colour LED: Red for invalid transaction, and Yellow for Echelon Service function.









Weight 1.2kg








mullion Style Readers

Section 5.�.�: Access Control – Proximity Readers

Featuresl Door mullion or turnstile

mounting

l Multicolour LCD messaging

l Internal l/O for door control

l Built-in audible buzzer

l Echelon “LON” device

l Optional:

l Smart card

l Proximity card

ORDER CODES

Mullion Style Reader for Smart Card TK_L12

Mullion Style Reader HID Technology TK_L19

Mullion Style Reader


Technical TK_L�� For Smartcard TK_L�� HID Technology

Compact, mono-directional reader for ISO14443A MIFARE® and ISO14443B

smart card technology (13,56MHz)

Compact, mono-directional reader for HID technology proximity cards (125kHz)

Integrated cable fly-lead for I/O wiring, LON communications and power supply connections

1 multicolour LED: Green for correct card read, Red for invalid transaction, Yellow for Echelon service function

Built-in audible buzzer with variable tones for valid/invalid transactions

Reading distance: up to 4cm with MIFARE® STD 1K card

Reading distance: up to 4cm with HID ISOprox II cards


Supply Voltage 12V dc +/- 10%

Energy Consumption 2W

LonWorks cabling Interface

Unshielded twisted pair cable in free topology Transceiver FTT10A, 78Kbps

Digital Inputs 2 supervised inputs: normal, alarm, cut, short

Outputs 2 open collector outputs:Lock Output: Open collector 100mA max

for driving an external relayOther output (LED): Open collector 100mA for driving an external relay

2 relay outputs: See the installation manual for the details

Lock output: Normally closed/ normally open, Current 6A holding

current, peak max 10A inductive load, Voltage 30V ac/dc

Other output (LED): Normally closed/normally open, Current 1A max, Voltage

30V ac/dc



Dimensions H 156 x W 40 x D 27mm

Weight 300 gr


Working Temperature -20ºC to +60ºC


Certification Directive EMC 89/336/EEC, 92/31/EEC Low Voltage Directive 72/23/EEC, 93/68/EEC; EN60950/EN55022-B/ETSI EN300-

339/EN55024

Directive EMC 89/336/EEC, 92/31/EEC Low Voltage Directive 72/23/EEC, 93/68/EEC; EN60950/EN55022-B/ETSI EN300-

339/EN55024

Smart Card & HiD compatible options


Proximity Reader


Proximity Reader

ORDER CODES

Proximity Reader TK S07



l HID Compatible


Bi-directional reader for HID Proximity cards (standard ISO/ABA 125Khz, up to 5cm of distance).

2 multicoloured LED: Green for the correct reading on each direction, Red for invalid transaction, Yellow for Echelon Service function.









Weight 0.45kg







Safety CEI 111-3; CENELEC 50061


Compact Proximity Reader


Compact Proximity Reader

ORDER CODES

Compact Proximity Reader TK C03

Featuresl Wall or Turnstile Mounting


l PIN Support

l Internal I/O for door control


l HID Compatible

l Optional:

l Time & Attendance


Integrated compact reading unit with display, keyboard, 2 digital inputs and 2 digital outputs.

Mono-directional reader for HID Proximity cards (standard ISO/ABA 125Khz, up to 5cm of distance).


Numeric-function Keyboard with 16 keys, to enter the pin code of the user or the reason for transit.

1 double-coloured LED signal: green LED for the correct reading of each direction and red/yellow for invalid transactions and or Messages.




Energy Consumption 1.8W nominal (2.1W max.)


Digital Input 2 opto-coupled Digital Inputs

Digital Output 2 Relay Outputs (1A @ 30V)




Weight 0.5kg







modular Proximity Reader


Modular Proximity Reader

ORDER CODES

Modular Proximity Reader TK D07




l HID Compatible

l Optional:

l Time & Attendance













Weight 0.9kg










Modular Proximity Reader


ORDER CODES

Modular Proximity Reader TK T07




l Personal Identification

Number

l HID Compatible

l Optional:

l Time & Attendance


One direction reader for HID cards.



Keyboard composed by 10 numeric keys and 6 function keys.




Energy Consumption 3.1W (230 mA)





Weight 1.15kg











Modular Proximity Reader with Graphic Display

with Graphic Display

ORDER CODES

Modular Proximity Reader with Graphic Display TK D27




l HID Compatible

l Optional:

l Time & Attendance

l “Mustering”



Graphic Liquid Crystal Display (LCD) with back lit 240 x 128 pixels format, 16 lines x 40 columns, for the visualisation of time data, guide messages for the user, service messages, spontaneous messages, transaction enquiry, generic enquiry, automatic info.

14 function keys, 4 reserved for service management, 10 configurable to manage enquiry, reasons and menu.





Energy Consumption 6W





Weight 1.25kg









OmniProx™


OmniProx™ Proximity Card Readers

Honeywell’s OmniProx™ range is a complete line of ��5 kHz HID compatible proximity

readers that delivers consistent performance.

All OmniProx™ readers (except the OP90) include three bezels: black, charcoal grey and ivory

and are constructed with rugged polycarbonate materials potted for both indoor and outdoor

applications.

The OmniProx™ family of readers combines unique functionality, high-quality engineering and

design for a variety of applications in the electronic access control market.

OmniProx™ readers offer superb reliability and consistent read range. Installation is simple and fast

with a mounting template included in all models.

Increased security functions, including optical tamper and security screw, prevent unauthorised

users from removing the reader from the wall or attempting to compromise the system.

For vandal-proof applications the OP90 vandal resistant reader is enclosed in a zinc die-cast metal

housing.

Featuresl Variety of sizes to choose from

to fit any décor:

l Mullion style

l Single-gang style (US)

l Single-gang style (UK)

l ADA compliant, built-in audible

buzzer

l Host LED control and tamper

output

l Optical tamper detect

mechanism provides output

signal to host

l Hidden mounting screws

deter vandalism

l Potted for superior weather-

resistance

l Wiegand output

l Genuine HID™ compatible

l Includes vandal-resistant

security and installation tool

with every reader.

l Adhesive-backed mounting

template reduces installation

time and risk of mounting

errors

l Unique bezel design allows

entire face of reader to be

customised for a unique look

or with custom colour to

fulfil architectural and décor

requirements

l Three bezels included with

each reader: black, charcoal

grey and ivory

l Warranty: Limited lifetime

warranty


OmniProx™


OP�0Mini-Mullion

OP�0Mullion

OP�0US Gang Box

OP�5UK Gang Box

OP�0Vandal Resistant

Description Smallest proximity reader for door mullions

Mini-size proximity reader for door mullions

Switch plate size, single-gang electrical box style

for US

Switch plate size, single-gang electrical box style

for UK

Vandal-resistant zinc die-cast single-gang

electrical box

Dimensions 80mm H x 40mm W x 12.8mm D

145mm H x 43mm W x 20mm D


88.9mm H x 88.9mm W x 15mm D


Max. Read Range1

1326 ProxCard IIClam Shell

7.6cm 10.2cm 5.1cm

1386 ISOProx® IIPVC Card

5.7cm 5.7cm 3.2cm

1336 DuoProx® IIPVC with Mag Stripe

5.7cm 5.7cm 3.2cm

1345 ProxKey™ IIKeyfob

3.2cm 3.2cm Not recommended

Environment Indoor/Outdoor weather-resistant

Operating Current@ 5 V dc)

35mA typ. / 50mA max. 35mA typ. / 100mA max. 50mA typ. / 100mA max.

Operating Voltage 5.0 – 16V dc (works down to 4.25V dc)

Power Supply Type Linear type recommended

Interface to Controller Max. cable distance to host: 150 m (Wiegand output)

Indicators ADA compliant with buzzer audio indicator, single tricolour (green-yellow-red)

Tamper Output Open collector, active low, max. sink current is 16mA

Humidity 0 – 95%, non-condensing

Temperature -31ºC to +63ºC

Colour Black, Charcoal Grey and Ivory (all three included) Silver

Regulatory Approvals USA and Canada: FCC Part15B, Industry Canada RSS-210, UL294; Europe: CE Mark Approval

Warranty2 Lifetime

ORDER CODES

OmniProx™ HID Compatible, Smallest Mullion Reader OP10HON

OmniProx™ HID Compatible, Smallest Mullion Reader without Logo (Generic) OP10GEN

OmniProx™ HID Compatible, Mullion Reader OP30HON

OmniProx™ HID Compatible, Mullion Reader without Logo (Generic) OP30GEN

OmniProx™ HID Compatible, Switch Plate, Single-Gang (US) Reader OP40HON

OmniProx™ HID Compatible, Switch Plate, Single-Gang (US) Reader without Logo (Generic) OP40GEN

OmniProx™ HID Compatible, Switch Plate, Single-Gang (UK) Reader OP45HON

OmniProx™ HID Compatible, Switch Plate, Single-Gang (UK) Reader without Logo (Generic) OP45GEN

OmniProx™ HID Compatible, Metal, Single-Gang (US) Reader OP90HON

1 Actual operating distance will vary depending upon installation environment and proximity to metal. 2 In accordance with Honeywell’s sales policy and warranty.

OmniProx™ is a trademark of Honeywell International Inc.HID is a registered trademark of HID Corporation.


OmniClass™

Section 5.�.�: Access Control – Smart Card Readers

OmniClass™ Contactless Smart Card Readers

Honeywell’s latest series of affordable contactless smart card readers continue to be

optimised for access control applications. OmniClass™ readers, which build upon the

convenience and reliability of prox technology, add many valuable features including

enhanced ��-bit security, encryption options, ability to read almost any ISO contactless

smart card, multi-application support and more.

OmniClass readers offer superb reliability, consistent read range and ease of installation. They are

available in multiple sizes and read ranges. OmniClass readers are available in black with 18” pigtail

wiring. OmniClass also provides the enhanced capabilities of smart card technology allowing

support for biometric profiles and multiple applications on each card simultaneously. OmniClass

solutions can retro-fit any Wiegand output readers, including standard HID® or Honeywell proximity

readers.

Smart card technology is ideally suited for access control, logical (PC) access, storage of biometric

templates, parking, secure ID’s with embedded tamper-proof digital photos, ePurse and many

more applications requiring secure and reliable read/write cards.

PROX (��5 kHz)

SMART (��.5� MHz)

Suitable for Basic Access Applications: • Support for site and card codes • Price competitive

l l

More Open: • Support for global standards • Inter-operability between vendors & applications

l

More Secure: • Stronger security via long keys, encrypted communication and mutual authentication • Unique card serial number

l

More Storage Space: • Memory on-board to store data for other applications

l

Featuresl Supports multiple ISO

standards: Allows OmniClass

to read almost any ISO

standard smart card

l High-Security: Encrypted data

exchange available between

card and reader and between

reader and host reduces the

risk of compromised data and

duplicated cards

l Available in mullion and switch

plate sizes

l ADA compliant built-in audible

beeper

l Host LED control

(programmable)

l Control cards can be used

to manage security keys

and change the operating

characteristics of the reader


deter vandalism

l Potted for superior weather

resistance

l Wiegand output


OmniClass™


OM�0 OM�0 OM�5 OM55

Dimensions 4.83 x 10.26 x 2.03cm 8.38 x 12.19 x 2.16cm 8.38 x 8.38 x 1.91cm 8.38 x 12.19 x 2.36cm

Max. Read Range1 7.6cm 11.4cm 7.6cm 10.1cm

Cable Distance to Host 152m max.

ISO Standard Support2 15693: Reads Infineon MyD, TI Tag-it, Philips I-Code14443A: Reads Philips MIFARE, DESFire, Ultralight, Infineon MyD

14443B: Reads PicoPass

Key Length 64 bit secret key; 32 bit challenge; 32 bit response

Data Encryption Available between card and reader and between reader and host

Regulatory Approvals UL/cUL, FCC, CE, Canada Radio, Australia

Operating Temperature -35ºC to +66ºC

Operating Humidity 5 to 95% relative humidity (non-condensing)

Operating Voltage Range 10 – 16V dc

Current (@12 V dc) 61mA avg, 178mA peak 78mA avg, 234mA peak 78mA avg, 234mA peak 80mA avg, 253mA peak

Tamper Output No Tamper magnet

Output Interfaces (all built-in) Wiegand

IP Rating IP55

Warranty3 Limited lifetime warranty

ORDER CODES

OmniClass Series Readers

OmniClass Mullion Mount Reader, Black Bezel, 18” Pigtail OM30BHON

OmniClass Switch Plate, Single-gang (US) Reader, Black Bezel, 18” Pigtail OM40BHON

OmniClass Switch Plate, Single-gang (UK/EU/Asian) Reader, Black Bezel, 18” Pigtail OM45BHON

OmniClass Reader with Keypad, Black Bezel, 18” Pigtail OM55BHON

OmniClass Series Credentials

OmniClass 2K PVC Card (26-bit) OKP0N26




OmniClass 16K PVC Card (26-bit) with Magnetic Stripe OKP2M26

OmniClass 16K PVC Card (34-bit) with Magnetic Stripe OKP2M34

OmniClass 16K PVC Card plus HID Prox (26-bit) OKH2N26

OmniClass 16K PVC Card plus HID Prox (34-bit) OKH2N34

OmniClass 16K PVC Card plus HID {rox (26-bit) with Magnetic Stripe OKH2M26

OmniClass 16K PVC Card plus HID prox (34-bit) with Magnetic Stripe OKH2M34

OmniClass 16K Sticker (26-bit) OKS2N26

OmniClass 16K Sticker (34-bit) OKS2N34

OmniClass 16K Keyfob (26-bit) OKK2N26

OmniClass 16K Keyfob (34-bit) OKK2N34

1 Actual operating distance will vary depending on installation environment and proximity to metal.

2 Certain ISO cards may only be able to read serial number. Please consult factory for exact compatibility.

3 In accordance with Honeywell’s sales policy and warranty.

Mifare™, DESFire™ and I-Code are registered trademarks of Philips Electronics N.V. MyD™ is a trademark of Infineon Technologies AG. OmniClass™ is a trademark of Honeywell International Inc.Tag-it™ is a trademark of Texas Instruments Incorporated. HID® is a registered trademark of HID Corporation.


Omniassure™


OmniAssure™ Contactless Smart Card Readers

Featuresl Flash-on-card to update

reader firmware to evolving

smart card standards

l Mullion and switch plate

mounting

l ADA compliant built-in audible

buzzer

l Two LEDs (red and green)

l Configuration cards can be

used to manage security keys

and change the operating

characteristics of the reader


deter vandalism

l Potted for superior weather

resistance

l Wiegand output

Smart card technology is ideally suited for access control, logical (PC) access, storage

of biometric templates, secure IDs with embedded tamper-proof digital photos, parking,

ePurse and many other applications requiring secure and reliable read/write cards.

Honeywell’s OmniAssure™ readers combine compliance with convenience. The patent-pending

‘flash-on-card’ design makes OmniAssure readers the easiest to use. With flash-on-card, the

reader’s firmware can be easily updated to support changing government standards without

removing the readers from the wall. With other smart card readers, the configuration cards only

change parameter settings for the currently installed firmware.

OmniAssure readers can retrofit most standard Honeywell or Wiegand-output proximity systems.

The readers also feature built-in-hardware to support future RS485 protocols and both the reading/

writing of smart card credentials. This protects the OmniAssure solution for changing needs in the

future.

Reader versions include smart card reader only, smart card reader plus keypad, fingerprint smart

card reader, and a multi-technology smart card/prox reader. All wall-mount readers are sold as

mullion mounts with optional mounting kits available.

Compatible cards include:l HSPD-12/FIPS 201 PIV II cards (endpoint

and transition), low-medium assurance

l TWIC (Transportation Worker Identification

Credential) cards

l FRAC (First Responder Authentication

Cards)

l DoD CAC (Department of Defence

Common Access Credentials)

l Open standard ISO 14443 technologies

(Mifare® Classic, DESFire®, and SmartMX®)

l 125 kHz proximity technologies (including

EM4102, Hitag, and HID® Prox)


Omniassure™


OM�0, OT�5 Smart Card

OT��, OT�� Smart Card + ��5 kHz Prox

OT�0, OT�5 Smart Fingerprint

Dimensions Mullion: 14.2 x 4.62 x 2.5cmU.S. gangbox: 14.2 x 7.32 x 2.8cm

Mullion: 19.25 x 5.05 x 4.3cmU.S. gangbox: 21.8 x 7.6 x 0.8cm

Compatible Cards Mifare®, DESFire®, SmartMX®, PIV II, FRAC, DoD CAC, TWIC

Mifare®, DESFire®, SmartMX®,PIV II, FRAC DoD CAC, TWIC, EM4102, Hitag,

HID® Prox

Mifare®, DESFire®, SmartMX®, PIV II, FRAC, DoD CAC, TWIC4

Max. Read Range1

ISO 14443A Card (Mifare®)Up to 3cm Up to 1.1cm Up to 3cm

ISO 14443B Card (DESFire®, SmartMX®)

Up to 3cm Up to 1.1cm Up to 3cm

1326 ProxCard II Clam Shell N/A Up to 4cm N/A

1386 ISOProx® II PVC Card N/A Up to 2.5cm N/A

ISO Standard Support 14443A, 14443B

Data Encryption Available between card and reader and between reader and host

PIN 4-bit burst, 8-bit burst

BiometricsNumber of Fingerprint Templates & Size

N/A Up to 2 templates stored on smart card depending upon card type and fingerprint technology; 752 bytes for minutia; 350 bytes for user templates

and records4

Enrolment Time N/A < 3 seconds

Equal Error Rate (ERR) N/A 0.1%; Adjustable

False Acceptance/ Rejection Rates

N/A Adjustable

Verification Time N/A < 1 second

Regulatory Approvals2 UL/cUL, FCC, CE, Canada Radio* UL/cUL*, FCC, CE, Canada Radio* UL/cUL, FCC, CE, Canada Radio*

Operating Temperature -20ºC to +60ºC 0ºC to +60ºC

Operating Humidity 5 – 95% relative humidity, non-condensing 30-80%, non-condensing

IP Rating IP67 if connector is sealed IP42, Indoor use only

Operating Voltage Range 4.5 – 16V dc 8 – 24V dc

Power Consumption 1.5 Watts average; 2.0 Watts peak 2.5 Watts average, 5 Watts peak

Tamper Output Optional Tamper Switch Accessory

Output Interfaces (all built-in) Wiegand, Clock & Data, RS485/RS232/RS422

Warranty3 Limited Lifetime Limited Lifetime 2 years

ORDER CODES

Mullion-mount reader, silver bezel, terminal connection OT30HON

Mullion-mount reader plus 125kHz proximity, silver bezel, terminal connection OT31HON

Mullion-mount reader plus keypad, silver bezel, terminal connection OT35HON

Mullion-mount reader plus keypad plus 125kHz proximity, silver bezel, terminal connection OT36HON

U.S. gangbox mounting kit for OT30HON, OT31HON, OT35HON, OT36HON IEMOUNT

Mullion-mount fingerprint reader, silver bezel, terminal connection OT70HON

Mullion-mount fingerprint reader plus keypad, silver bezel, terminal connection OT75HON

U.S. gangbox mounting kit for OT70HON, OT75HON IEMOUNT2

Tamper switch accessory for all readers IETAMPER

Note: Contact factory for reader configuration cards to set up the reader per site requirements.

OmniAssure™ is a trademark of Honeywell International Inc.

Mifare®, DESFire®, and SmartMX® are trademarks of Philips. HID® and ISOProx® are trademarks of HID Global.

1 Actual operating distance will vary depending upon installation environment and proximity to metal. 2 * = submitted/pending. 3 In accordance with Honeywell’s sales policy and warranty. 4 Fingerprints supported on Mifare® and DESFire®.


Bioaccess™

Section 5.�.�: Access Control – Fingerprint Readers

Contactless Mifare™ Fingerprint Readers

Precise BioAccess™ Mifare is a plug and play fingerprint reader that offers unparalleled

security for access control. Precise BioMatch™ technology provides reliable one-to-

one matching— personal proof that people are who they claim to be.

Precise BioAccess™ is convenient, fast, accurate, easy to implement and extremely cost effective.

By only storing the template on a contactless smart card instead of in a less secure database,

privacy is preserved. Precise BioAccess™ Mifare is designed to instantly replace existing readers

and requires no new wiring or software updates.

Precise BioAccess™ Enrolment Station is a standalone package for enrolling fingerprints and

writing biometric templates onto Mifare contactless cards for use with Precise BioAccess™ Mifare

readers. The Precise BioAccess™ Enrolment Station gives control over the contents of the cards

so the Precise Biometric data can coexist with other applications and data on the Mifare card.

Featuresl Increased security — identifies

people, not PIN codes

l Compatible with all major

access control systems

l Preserved privacy —

fingerprint template stored on

card

l Decreased administration cost

— no lost PIN codes

l Scalable—no local database,

no performance penalty

l Industry leading fingerprint

matching technology.

l Stores up to four fingerprint

templates on a Mifare

standard 4K card, injured

fingers are not a problem

l Each finger can be assigned

their own card number,

enabling control of alarm and

T&A systems

l Flexible storage of template

on card, enables use of cards

containing legacy data

l Unique personal keys,

protects against unauthorised

re-enrolment and cards from

unauthorised parties

l Support for MAD (Mifare

Application Directory), a

demand for multi-application

cards


Section 5.�.�: Access Control – Fingerprint Readers

Bioaccess™

PRBIORDR — Mifare Compatible

Description The reader matches the fingerprint of the person seeking entry to the identity of the cardholder as stored on the Mifare card.

Dimensions 12.5cm x 6.8cm x 6.1cm (H x W x D)

Max. Read Range1 4.0cm

Cable Distance to Host (Wiegand) 152m max

Compatible Cards Mifare standard 1K and 4K, Mifare Pro and Mifare ProX

Number of Templates Unlimited

Template Size 534 bytes

Enrolment Time < 10 seconds

Equal Error Rate (EER) N/A

False Acceptance Rate Configurable

False Rejection Rate Configurable

Custom Features Mifare ROM card number, enables unique card number. Custom card number, enables use of old card number and compatibility with other card formats. RAW data, enables sending of any data required following a successful match

Verification Time < 1 second

Regulatory Approvals FCC, CE

Operating Temperature +10ºC to +50ºC

Operating Humidity Office Environment (typ. 45 to 65% relative humidity)

Operating Voltage Range 12 – 24V dc

Current (@12V dc) 100mA typ, 250mA peak

Communications No updates required to reader, templates stored on card

Output Interfaces Wiegand, Clock & Data

Warranty2 1 year

ORDER CODES

Mifare™ BioAccess Reader Fingerprint and Smart Card Reader PRBIORDR

Mifare™ BioAccess Enrolment Kit, 115V ac, USB Fingerprint Reader, and Software PRBIOENRU

Mifare™ BioAccess Enrolment Kit, 115V ac, Parallel Port Fingerprint Reader, and Software PRBIOENRP

1 Actual operating distance will vary depending upon installation environment and proximity to metal. 2 In accordance with Honeywell’s sales policy and warranty.All specifications are subject to change without notification. Precise BioAccess is a Registered Trademark of Precise Biometrics.


HandKey™

Section 5.�.5: Access Control – Hand Geometry Readers

The HandKey reader by Recognition Systems, Inc. utilises field proven hand geometry

technology that maps and verifies the size and shape of a person’s hand in less than one

second.

The HandKey captures a three dimensional image of the hand using a 32,000 pixel image array. 90

measurements, including the lengths, widths, thickness and surface area of the fingers and hand

are taken. An advanced algorithm determines the unique aspects of the hand and then generates a

nine-byte hand template. This template is then stored and used for subsequent comparisons. Dirt,

cuts and abrasions on the hand have no impact on accuracy.

The HandKey CR is specifically designed to work in conjunction with card based access control

systems. This makes adding biometric security to critical access points fast, simple and seamless

for both new and existing systems. The HandKey CR without integrated card reader and the

HandKey CR with HID proximity can store up to 512 cardholder templates in the unit. The HandKey

CR with an integrated OmniClass/iCLASS reader stores cardholder templates on their cards,

protecting cardholder privacy and eliminating the need to store and update cardholder databases

in individual HandKey CR readers. The storage of the template on the card allows the reader to

support an unlimited number of cardholders.

The HandKey II provides the security and convenience at an affordable price, even when compared

to cardbased systems. Because a hand is the card, HandKey II allows access only to authorised

people without the hassles of a card or key. By eliminating cards, administrative costs are reduced

while greatly increasing the level of security. Users appreciate the convenience of never worrying

about keeping track of a card or key.

Featuresl When multiple HandKey units

are linked together via RS-485

or Ethernet, the unit’s built-in

template management system

can be used to distribute

hand imprints to other hand

readers in the network. This

allows users to enrol at one

reader and then use other

readers in the system without

re-enrolment

l Integrated wall-mount design

l Flexible storage of template

on OmniClass/iCLASS cards

eliminates need to maintain

databases in individual

readers

l Card readers support 26-bit

Wiegand with other data

formats available

l Integrates into existing

systems

l To ensure system integrity,

a tamper switch is built into

the reader. Tamper alarms

and other conditions such as

verification refused, lock out

and duress can be monitored

by the panel directly or

through one of the HandKey’s

two auxiliary outputs

HandKey™ Hand Geometry Readers

Section 5: Access Control


ProductDescription

HandKey™

Section 5.�.5: Access Control – Hand Geometry Readers

HandKey CR HG-�

HandKey CR HG�-PROX

HandKey CR HG�ICLASS

HandKey II HG�-II

Description This reader stores templates for up to 512 users in the unit.

This reader stores templates for up to 512 users in the unit

and reads HID prox cards.

This reader stores templates on an OmniClass/iCLASS

smart card.

This is a standalone unit for up to 512 users with 2 auxiliary and a door egress input, 3

auxiliary outputs.

Dimensions 29.6cm x 22.3cm x 21.7cm (H x W x D)

Max. Read Range1 N/A 2” Card sits in holder N/A

Cable Distance to Host (Wiegand)

500’ (152m) max

Compatible Cards – HID proximity OmniClass / iCLASS –

Number of Templates 512 512 Unlimited 512

Template Size 9 bytes

Enrolment Time < 15 sec

Equal Error Rate (EER) 0.1%

False Acceptance Rate 0.1%

False Rejection Rate 0.1%

Custom Features FTE of 1 in 10,000

Verification Time less than 1 second

Regulatory Approvals FCC, CE, UL 294

Operating Temperature 0° to 45° C

Operating Humidity 20% – 80% relative humidity

Operating Voltage Range 12 to 24V dc

Current (@12V dc) 170mA 200mA 200mA 170mA

Tamper Built-in tamper switch

Communications RS-485, RS-422 or Ethernet

Output Interfaces Wiegand BR-100 relay

Warranty2 1 year

ORDER CODES

HandKey CR Hand Geometry Reader that stores 512 user templates HG-4

HandKey CR Hand Geometry Reader that stores 512 user templates and reads HID Prox cards HG4-PROX

HandKey CR Hand Geometry Reader that stores user templates on OmniClass/iCLASS card HG4ICLASS

HandKey II Hand Geometry Reader that stores 512 user templates for standalone use HG4-II

Ethernet Module HGEN200

RS-232 to RS-485 Interface with 120V Power Supply HGDC104

Handnet for Windows, 5 Reader Licenses HGHNR5

Handnet for Windows, 25 Reader Licenses HGHNR25

Handnet for Windows, Unlimited Reader Licenses HGHNRUNL

Memory Expansion for software key for HG-4 and HG4-II units built after 2003, supports up to 9,728 users HG4-EM801

Memory Expansion EEPROM chip for HG-4 and HG4-II, supports up to 9,728 users HG4-EM-800

Memory Expansion EEPROM chip for HG-4 and HG4-II, supports up to 32,512 users HG4-EM-803

Hurricane Outdoor Enclosure with temperature range of -20° to 120° F (-29° to 49° C) when using internal heater option Dimensions: 14” H x 12” W x 10.5” D (35.6cm H x 30.5cm W x 26.7cm D) HG4ENC1

1 Actual operating distance will vary depending upon installation environment and proximity to metal.2 In accordance with Honeywell’s sales policy and warranty.


Keyboard

Section 5.�: Access Control – Peripherals

ORDER CODES

Keyboard TK S31



l Optional:

l Combined with Reader for

higher security access or

out of hours access.


Keyboard composed by 10 numeric keys and 6 function keys. It can used as a reader allowing the cardholder to insert his card number or also as door unlocking by keying the keyboard code.

2 multicoloured LED: Green for the correct reading on each direction, Red for invalid transaction, Yellow for Echelon Service function.









Weight 0.4kg







Keyboard


integrated Terminal


ORDER CODES

Integrated Terminal TS TA1x




l Time & Attendance

l Optional reader technology

l HID Prox

l Magnetic Stripe

l Smart Card

l Optional

l Muster Station


Bi-processor CPU68EN302, including a Motorola 68000 (32 bit architecture) and an Ethernet communication processor.

1 Mbyte FLASH EPROM to Download the application firmware.

1 Mbyte FLASH EPROM on a removable cartridge for the download of the permanent database (tables of the access right of the users codes for the workdays, pre-holiday and holiday days) and for the ‘Transit and Events’ Buffer. Optional memory board with 8 Mbytes FLASH EPROM available.

1 Mbyte RAM for the current activity.

2 Relay out (1A, 30V contacts), 2 opto-coupled digital inputs (1 / 12V range).

Up to 10.000 cards and 2.500 transactions stored on a removable cartridge with Flash EPROM memory in case of connection failure with the EBI_Tema host (resulting in no losses in case of a power failure). Up to 60.000 cards and 40.000 transactions with the extended memory board. See table below for details.

Management of the peer-to-peer connection with the other TemaServer and as a consequence high decision-making capability and full operative autonomy.

Autonomous clock/calendar Chip with automatic management of regular/daylight saving time with an autonomy of 1000 hours in case of power failure.

Lead battery backup, with full functionality for 4 hours in case of network failure, and signalling of the battery-charge status.

Low voltage power-supply (12V dc/ac) for maintenance safety.

Tamper protection of the unit to prevent opening.

Watchdog protection for recovery in case of malfunctions.

Tele-diagnostic in Ethernet connection.

Available with the following reader technologies: HID, Magnetic, Motorola, WSE, Legic, Mifare (ISO 14443A), Smart card contact (ISO 7817).

Integrated Terminal


ProductDescription

Standard Memory Card




6.000 2.500 400


SAP 2500 7.000 135

Extended Memory Card


Access Control 60.000 40.000 5.000


50.000 40.000 5.000

Interactive T&A 15.000 65.000 1.000

SAP 32.000 65.000 1.000

Maximum number of cards and buffers size

Technical Specification


Supply Voltage 12V dc/ac -15% to +20%

Energy Consumption 3.6W (4.2W max. during recharging of a fully used battery)

Interface Ethernet (10BaseT, 10Base2, AUI) for TCP/IP-UDP connection with EBI_Tema, and peer-to-peer between the other TemaServer units


Protection Degree IP55. For the TS_TA11 model, the magnetic head reader has IP31 protection degree

Dimensions 221mm x 304mm x 47 mm (W x H x D)

Weight 3.5kg, (+0.5kg transformer TRN01)





ORDER CODES

Integrated Terminal TS TA1x

integrated Terminal



Dual Wiegand interface


ORDER CODES

Dual Wiegand Interface TK S014


l Supports Two “Wiegand 5

Wire connected card readers

and the I/O associated with a

single door.



Temaline Dual Wiegand Interface Module.


Supply Voltage 12V dc ± 20%

Energy Consumption 70mA

Outputs Power Open Collector (Drain)

Number: 2 Voltage: 10V to +14V max, (internal power supply) Voltage (absolute max) 10V to +30V (from external power supply) Current: 1.2A holding current (peak max 5A inductive load)

Inputs 5 states controlled: normal/close, open, short, cut, remote tamper. Number: 2 Current: 0 to 3mA Voltage: +10V max.


Wiegand Inputs Type: Wiegand (normally high) Number: 2 Voltage: +5V nominal (TTL), +14V max.

Power supply output for the readers Voltage: 12V +/-15% (line voltage) Current: 80mA max per channel.

Output to control LEDs and buzzer Type: Open collector Number: 3 each Wiegand channel Function: Red LED, Green LED, Buzzer Voltage: +14V max Current: 80mA max




Weight 0.2kg

Mounting Standard DIN/omega rail






Dual Wiegand Interface


Digital i/O module


ORDER CODES

Digital I/O Module TK C21


l Supports 4 x Inputs & 4 x

Outputs



Temaline I/O Module.

Provides 4 Open collector Outputs and 4 Controlled Inputs.

Must be mounted on a standard DIN rail.



Energy Consumption 0.7W (50mA)

Outputs Open Collector Voltage: +14V max, 0V min. Current: 0.1A max.

Inputs 5 states controlled: normal, open, short, cut, remote tamper. Current: 0 to 3mA for each input (internal reference) Voltage: +14V max.




Weight 0.2kg

Mounting Standard DIN/omega rail






Digital I/O Module


Power Supply module


ORDER CODES

Power Supply Module TP U01

Featuresl Intelligent Power Supply

l Monitors all features of the

Power Supply associated with

the TemaServer.


Temaline intelligent power supply.

Includes backup battery for 4 hours of autonomy in case of power failure.


Supply Voltage 230V ac ±15% 50Hz

Energy Consumption 80 mAAC (nominal, on 10W load) 200 mAAC max. (for fast battery recharge)

Outputs Voltage 12.5V dc ±10% Current 0 to 0.8A (nominal) 1A (max.)

Battery recharge 80% of capacity in 4 hours

Battery autonomy 4 hours with an 800mA load





Weight 5.9kg

Mounting Vertical only






Low Voltage Safety 72/23/CEE; 93/68/CEE

Power Supply Module

SECTION 5: page 50

Power Supply module


ORDER CODES

Power Supply Module TP U03


Temaline intelligent power supply.

Includes backup battery for 4 hours of autonomy in case of power failure.


Supply Voltage 230V ac ±15% 50Hz

Energy Consumption 350 mAAC (nominal, on 60W load) 1 AAC max. (for fast battery recharge)

Outputs Voltage 12.5V dc ±10% Current 0 to 4.5A (nominal) 5A (max.)

Battery recharge 80% of capacity in 4 hours

Battery autonomy 4 hours with 4.5A load





Weight 8.5kg + 9kg battery

Mounting Vertical only






Low Voltage Safety 72/23/CEE; 93/68/CEE

Power Supply Module

SECTION 5: page 5�

Power Supply Controller


ORDER CODES

Power Supply Controller TP U04

Featuresl Intelligent Power Supply

l Monitors all features of

3rd Party Power Supply

associated with the

TemaServer


Temaline intelligent power supply controller.

Allows user of external power supply and batteries, providing the same features that a Temaline power supply provides.

Management of tamper on case opened. Additional input for external anti-removal tamper switch.


Power Supply 14.1V dc ±2% 10A max, depending on the configuration

Outputs Voltage 12.5V dc ±10% Current 1A, 2.5A, 5A configurable

Battery recharge time Voltage 13.8V dc ±1% Current 0.5 to 5A configurable

Battery autonomy Configurable

LonWorks cabling Interface Unshielded twisted pair cable in free topology.




Weight 0.4kg

Mounting DIN rail





Electromagnetic Compatibility 89/336/EEC; 92/31/EEC

Low Voltage Safety 72/23/EEC; 93/68/EEC

Power Supply Controller

Temaline Solutions Tema Access Control...Temaline Solutions Section 5. : Access Control Solutions...

Documents

Transcript of Temaline Solutions Tema Access Control...Temaline Solutions Section 5. : Access Control Solutions...