Tellabs 1100-742G Single Family Unit (SFU) GPON ONT · Tellabs® 1100-742G Single Family Unit (SFU)...
Transcript of Tellabs 1100-742G Single Family Unit (SFU) GPON ONT · Tellabs® 1100-742G Single Family Unit (SFU)...
Tellabs DATA SHEET
see Tellabs.com for more information about Tellabs solutions 1
OverviewThe Tellabs® 1100-742G single Family Unit GPON Optical Network Terminal (ONT) is hardened for single-family home and small business applications. The ONT features two provisionable voice ports and four high-speed 10/100/1000 data ports. These support Voice-over-IP (VoIP), high-speed Internet (HsI) and Internet Protocol television (IPTV) services. The Tellabs® 742G ONT provides ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps upstream. GPON interfaces with extended PON reach up to 30 km/18.6 mi.
The Tellabs® 742G ONT is compliant with ITU standard management control interface (OMCI) definitions. It is manageable from the Tellabs® Panorama™ Integrated Network Manager and supports the full range of FCaPs functions.
Features and Benefitsn Voice, data, IPTV and video services supported over a single
GPON passive optical link or active ethernet link
n support for a wide range of revenue-generating voice features
n Wire speed 1000 Mbps data transfer
n Qos handling, including eight traffic classes for triple-play service support
n extensive ethernet bridging plus VlaN tagging, switching and filtering capabilities for secure traffic management across services and end users
n Power management for preservation of essential services during aC power outage
n Indoor or outdoor wall mountable for easy installation
n Up to seven feet of internal fiber storage
Included HighlightsGPON ServiceThe Tellabs® 742G GPON ONT terminates GPON fiber via a single sC/aPC-type optical connector. It complies with GPON standard ITU-T Rec.G984.2 and G984.2 amendment. The ONT receives downstream data at 2.488 Gbps over a wavelength of 1490 nm and sends upstream data at 1.244 Gbps over a wavelength of 1310 nm.
Tellabs® 1100-742G Single Family Unit (SFU) GPON ONT
The Tellabs® 742G GPON ONT supports these physical layer features:
n support for Class b+ and optional Class C optics
n Transceiver is a Class 1 laser product and complies with FDa21 CFR 1040.10 and 1040.11.
n Received optical power monitoring
n supports point-to-point active ethernet signals up to 40 km
POTS (Plain Old Telephone Services)The Tellabs® 742G GPON ONT supports plain old telephone voice services over RJ-11- or IDC-equipped connectors.
n VoIP softswitch or Class 5-based high-quality voice service through POTs lines
n High-speed Internet or VoIP access through four 10/100/1000 base-T ethernet interfaces
n support for sIP protocol in one software load
n support for a myriad of GR-303/V5 gateway protocols
High-Speed Data ServicesThe Tellabs® 742G GPON ONT supports 10/100/1000 base-T interfaces. The ethernet interface operates as an Ieee 802.1D transparent bridge based on RFC-2684. Class of service as well as bandwidth is controlled through provider provisionable options. The ethernet port supports streaming IP video, IPTV content delivery and whole-home DVR, and meets ITU 802.1p Qos standards at the MaC level.
Figure 1. Tellabs® 1100-742G GPON ONT
Figure 2. Optional outdoor enclosure
DATA SHEET
see Tellabs.com for more information about Tellabs solutions 2
© 2015, Tellabs access, llC. all rights reserved.
+1 800 690 2324 +1 630 798 9900 www.tellabs.com
1415 West Diehl Road Naperville, Il 60563 U.s.a.
Take the next step. Contact Tellabs today.
Tellabs® 1100-742G sINGle FaMIly UNIT (sFU) GPON ONT
Tel0053 12/15
SpecificationsServices and FeaturesOptical:n 2.5 Gbps downstream,
1.244 Gbps upstream
n Optical wavelengths: 1490 +/-10 nm receive, 1310 +/-20 nm transmit
n launch power: 0.5 to +5 dbm
n Receiver sensitivity: -28 dbm
n Input power overload: -8 dbm
n Received optical power monitoring
n GPON/active ethernet configurable
GPON:n serial number discovery and registration
ID provisioning
n ITU-T G.984/G.988 compliance
n Dba support via Mode 0 DbRu (piggyback) reporting
n Downstream advanced encryption standard (aes) support
n Forward error Correction (FeC)
n Upstream traffic management using priority-based or rate-controlled scheduling
n support for up to 8 T-CONTs with multiple priority queues per T-CONT
n Multiple GeM ports with flexible mapping between T-CONTs and priority queues
n pbit-based GeM port and upstream priority queue selection
n IPTV traffic filtering (multicast GeM port)
OAM:n ITU-T G.984.4/G.988-based
management of all services
n Remote firmware upgrade, including automatic rollback
n VOIP configuration from remote server
n TR-69 provisioning
Ethernet L2:n 10/100/1000 base-T interface with
RJ-45 connectors
n Meets Ieee 802.1 specifications
n MDI/MDIX autosensing and autonegotiation
n ethernet bridging and switching per 802.1D
n 802.1p marking/remarking, DsCP mapping
n 802.1Q, including VlaN translation, filtering, tagging, stacking (QinQ)
n Up to 12 VlaN groups per port
n automatic MaC address learning, aging and filtering
n Up to 1,024 MaC address entries
n MaC address limiting
n Up to 256 multicast groups
n IGMP v2/v3 snooping
n IGMP snooping with immediate leave
n Downstream pbit and flow based laN port queue selection
n Downstream flow and laN port-based rate limiting
Voice:n equipped with RJ-11 connectors and/or
IDC connectors
n 5 ReN per line
n loop start
n balanced and unbalanced ringing
n Country-specific coefficients and tones
n DTMF dialing
n Metallic loop testing (GR-909)
n sIP (RFC 3261)
n DTMF encoding by relay or in-band method
n Class service support (Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.)
n G.711 ( -law & a-law), G.726-32, G.722, G.729
n DHCP client or static IP configuration
n echo cancellation
n T.38 and in-band Fax
n Voice activity detection and comfort noise generation
n Proven interoperability with major soft switch and voice gateway vendors
n Official Metaswitch and broadsoft certifications
PhysicalLEDs:n Power
n battery
n Optical status
n HPNa (Unused)
n NeT (ethernet link)
n MGMT (Management Traffic)
n POTs (Hook status)
Dimensions and Weight:n size: 13 x 11.25 x 4.3 in
(233 x 286 x 110 mm)
n Weight: 2 lb (.9 kg)
Environmental:n -40° C/F to +46°C (114.8°F)
ambient + solar load
n Humidity: 5% to 90%
n Outdoor enclosure sold separately
Power:n Power input: 12 to 14 VDC
n Power consumption: 13.0 to 20 W
n Input connection: Phoenix plug
n Dying gasp support
Regulatory Compliance:n safety: Ul/Csa 60950, IeC 60950, eTsI
n FDa — FCC 47 CFR Part 15, Class b and FDR 21 CFR
n 1040.10 and 1040.11 Class 1
n eMC: FCC Part 15 subpart b, Class b
n eN 55022, eN 55024, eN 300 386, Class b
n Ce: Compliant
n RoHs 6: Compliant
n Weee: Compliant