Gorman Machine Corp.7 Burke DriveBrockton, MA 02301Tel. 508-588-2900Fax 508-588-9560

www.gormanmachine.comsales@gormanmachine.com

HUSTLER TOROID WINDER

The HUSTLER is a new concept in pull winder technique. Its advanced design withTILT-UP HEAD for safety, along with adjustable automatic core rotation, makes it anexcellent production machine. All air cylinders and valves have their self containedlubrication system for long life. New SET-UPS are easily and quickly made with alladjustments on top.

• More Toroids per Hour Rapid Cycle time of better than a turn a second in many cases.

• Auto Rotation of Toroidal Coil with Each Stroke Eliminates tiresome manual turning of core for each turn.

• Safety First Exclusive TILT-UP head greatly reduces chance of painful and costly hand injury from upcoming wire hook.

• Wide Range of Core and Wire Sizes Cores to 2 ½” (64mm) O.D. and wires to #12 AWG.

• Quick Set-Ups Changed in a few minutes for different size cores.

• Quiet Operation Less noise means more coils with less operator fatigue.

Gorman Machine Corp.P.O. Box 512Middleboro, MA 02346Tel. 508-588-2900Fax 508-588-9560

• The 4x4 Winding Head is superior in several ways.

•Greatforwindingjobswherewirewouldgethungupundertheidlerroller.

•NewtwinIndexCylinderscanbeadjustedequallyusingdialgradations.

• Backwardscompatiblewitholder2drivencorerotatormachines.Justafewboltstoswapitout.

•OriginalThreeRoller,2wheeldriveisstillavailable.

• More Toroids per Hour RapidCycletimeofbetterthanaturnasecondinmanycases.

• Auto Rotation of Toroidal Coil with Each Stroke

Eliminatestiresomemanualturningofcoreforeachturn.

The HUSTLER is a new concept in pull winder technique. Its advanced design with TILT-UP HEAD for safety, along with adjustable automatic core rotation, makes it an excellent production machine. We eliminated the oiler. New Air Cylinders with Buna seals are lubricated for life. New SET-UPS are easily and quickly made with all adjustments on top.

NEW OPTIONAL FOUR ROLLER, FOUR WHEEL DRIVE (4x4) CORE ROTATOR WINDING HEAD NOW AVAILABLE

Features • Rugged Construction – All parts over- designed for a long, trouble free life.

• Coils - to 2 ½” (64mm) O.D. to as small as ¼” (6.4mm) O.D.

• Wire Sizes – To #12 AWG.

• Quiet Operation – Cushioned main air cylinder cuts noise to a minimum. Muf ed air exhaust ports.

• Two driven Core Rotators – Positive core drive. Third, pressure idler roller is ball bearing mounted.

• Adjustable Stepping of core rotators simply adjusted for wide range of wire sizes and spacing of turns.

• Left or Right Core Indexing – Instantly changed by lever. Perfect for Common Mode Toroids

• Important Safety Feature – TILT-UP winding head prevents an operator’s hand from being trapped between upcoming wire hook and a xed core holder.

• Dual Air Pressure System – allows strong pull down on wire, but lets upward return stroke be at a much lower pressure for safety reasons.

• Electronic Solenoid Air Valves – permit a simpler electric foot switch and a more reliable electric turns Counter plus the ability to index the core without adding counts. Valuable for separating windings.

• Many Sizes – of standard core rotators available from stock.

• Many Sizes – of standard wire pullers available, made from Delrin – prevents scuf ng or worse still, stripping of insulation.

• Electric Foot Switch – included as standard equipment.

• Simple Bench Mounting by clamping on front of table, or bolting for a more permanent mount.

• Reliability and Safety are a buyer’s most important consideration. All parts are designed for ruggedness and long life, and the TILT-UP HEAD is a must for operator safety.

TILT-UP HEAD FOR OPERATOR SAFETY

• Rugged Construction–Allpartsover-designedforalong,troublefreelife.

• Coils-to5”(127mm)O.D.toassmallas1/4”(6.4mm)O.D.

• Wire Sizes –To#12AWG (2 mm).

• Quiet Operation–Cushionedmainaircylindercutsnoisetoaminimum.Muffledairexhaustports.

• Adjustable Steppingofcorerotatorssimplyadjustedforwiderangeofwiresizesandspacingofturns.

• Left or Right Core Indexing–Instantlychangedbylever.PerfectforCommonModeToroids

• Important Safety Feature–TILT-UPwindingheadpreventsanoperator’shandfrombeingtrappedbetweenupcomingwirehookandafixedcoreholder.

• Dual Air Pressure System–allowsstrongpulldownonwire,butletsupwardreturnstrokebeatamuchlowerpressureforsafetyreasons.

• Electronic Solenoid Air Valves –permitasimplerelectricfootswitchandamorereliableelectricturnsCounterplustheabilitytoindexthecorewithoutaddingcounts.Valuableforseparatingwindings.

• Many Sizes –ofstandardcorerotatorsavailablefromstock.

•Many Sizes–ofstandardwirehooksavailable,madefromDelrin–preventsscuffingorworsestill,strippingofinsulation.OptionalHooksavailablemadefromPeekmaterialfortoughjobs.

• Electric Foot Switch–includedasstandardequipment.

• Simple Bench Mountingbyclampingonfrontoftable,orboltingforamorepermanentmount.

• Reliability and Safetyareabuyer’smostimportantconsideration.Allpartsaredesignedforruggednessandlonglife,andtheTILT-UPHEADisamustforoperatorsafety.

TILT-UP HEAD FOR OPERATOR SAFETY